diff options
Diffstat (limited to 'security/nss/cmd/sdrtest/sdrtest.c')
| -rw-r--r-- | security/nss/cmd/sdrtest/sdrtest.c | 410 |
1 files changed, 0 insertions, 410 deletions
diff --git a/security/nss/cmd/sdrtest/sdrtest.c b/security/nss/cmd/sdrtest/sdrtest.c deleted file mode 100644 index b6225539c..000000000 --- a/security/nss/cmd/sdrtest/sdrtest.c +++ /dev/null @@ -1,410 +0,0 @@ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1994-2000 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ - -/* - * Test program for SDR (Secret Decoder Ring) functions. - * - * $Id$ - */ - -#include "nspr.h" -#include "string.h" -#include "nss.h" -#include "secutil.h" -#include "cert.h" -#include "pk11func.h" - -#include "plgetopt.h" -#include "pk11sdr.h" -#include "nssb64.h" - -#define DEFAULT_VALUE "Test" -static const char default_value[] = { DEFAULT_VALUE }; - -PRFileDesc *pr_stderr; -PRBool verbose = PR_FALSE; - -static void -synopsis (char *program_name) -{ - PR_fprintf (pr_stderr, -"Usage: %s [-d <dir>] [-v] [-t <text>] [-a] -i <input-file>\n" -" %s [-d <dir>] [-v] [-t <text>] [-a] -o <output-file>\n", - program_name, program_name); -} - -static void -short_usage (char *program_name) -{ - PR_fprintf (pr_stderr, - "Type %s -H for more detailed descriptions\n", - program_name); - synopsis (program_name); -} - - -static void -long_usage (char *program_name) -{ - synopsis (program_name); - PR_fprintf (pr_stderr, "\nSecret Decoder Test:\n"); - PR_fprintf (pr_stderr, - " %-13s Read encrypted data from \"file\"\n", - "-i file"); - PR_fprintf (pr_stderr, - " %-13s Write newly generated encrypted data to \"file\"\n", - "-o file"); - PR_fprintf (pr_stderr, - " %-13s Use \"text\" as the plaintext for encryption and verification\n", - "-t text"); - PR_fprintf (pr_stderr, - " %-13s Find security databases in \"dbdir\"\n", - "-d dbdir"); -} - -int -readStdin(SECItem * result) -{ - int bufsize = 0; - int cc; - int wanted = 8192; - - result->len = 0; - result->data = NULL; - do { - if (bufsize < wanted) { - unsigned char * tmpData = (unsigned char *)realloc(result->data, wanted); - if (!tmpData) { - if (verbose) PR_fprintf(pr_stderr, "Allocation of buffer failed\n"); - return -1; - } - result->data = tmpData; - bufsize = wanted; - } - cc = PR_Read(PR_STDIN, result->data + result->len, bufsize - result->len); - if (cc > 0) { - result->len += (unsigned)cc; - if (result->len >= wanted) - wanted *= 2; - } - } while (cc > 0); - return cc; -} - -int -readInputFile(const char * filename, SECItem * result) -{ - PRFileDesc *file /* = PR_OpenFile(input_file, 0) */; - PRFileInfo info; - PRStatus s; - PRInt32 count; - int retval = -1; - - file = PR_Open(filename, PR_RDONLY, 0); - if (!file) { - if (verbose) PR_fprintf(pr_stderr, "Open of file %s failed\n", filename); - goto loser; - } - - s = PR_GetOpenFileInfo(file, &info); - if (s != PR_SUCCESS) { - if (verbose) PR_fprintf(pr_stderr, "File info operation failed\n"); - goto file_loser; - } - - result->len = info.size; - result->data = (unsigned char *)malloc(result->len); - if (!result->data) { - if (verbose) PR_fprintf(pr_stderr, "Allocation of buffer failed\n"); - goto file_loser; - } - - count = PR_Read(file, result->data, result->len); - if (count != result->len) { - if (verbose) PR_fprintf(pr_stderr, "Read failed\n"); - goto file_loser; - } - retval = 0; - -file_loser: - PR_Close(file); -loser: - return retval; -} - -int -main (int argc, char **argv) -{ - int retval = 0; /* 0 - test succeeded. -1 - test failed */ - SECStatus rv; - PLOptState *optstate; - PLOptStatus optstatus; - char *program_name; - const char *input_file = NULL; /* read encrypted data from here (or create) */ - const char *output_file = NULL; /* write new encrypted data here */ - const char *value = default_value; /* Use this for plaintext */ - SECItem data; - SECItem result = {0, 0, 0}; - SECItem text; - PRBool ascii = PR_FALSE; - - pr_stderr = PR_STDERR; - result.data = 0; - text.data = 0; text.len = 0; - - program_name = PL_strrchr(argv[0], '/'); - program_name = program_name ? (program_name + 1) : argv[0]; - - optstate = PL_CreateOptState (argc, argv, "?Had:i:o:t:v"); - if (optstate == NULL) { - SECU_PrintError (program_name, "PL_CreateOptState failed"); - return -1; - } - - while ((optstatus = PL_GetNextOpt(optstate)) == PL_OPT_OK) { - switch (optstate->option) { - case '?': - short_usage (program_name); - return retval; - - case 'H': - long_usage (program_name); - return retval; - - case 'a': - ascii = PR_TRUE; - break; - - case 'd': - SECU_ConfigDirectory(optstate->value); - break; - - case 'i': - input_file = optstate->value; - break; - - case 'o': - output_file = optstate->value; - break; - - case 't': - value = optstate->value; - break; - - case 'v': - verbose = PR_TRUE; - break; - } - } - PL_DestroyOptState(optstate); - if (optstatus == PL_OPT_BAD) { - short_usage (program_name); - return -1; - } - if (!output_file && !input_file && value == default_value) { - short_usage (program_name); - PR_fprintf (pr_stderr, "Must specify at least one of -t, -i or -o \n"); - return -1; - } - - /* - * Initialize the Security libraries. - */ - PK11_SetPasswordFunc(SECU_GetModulePassword); - - if (output_file) { - rv = NSS_InitReadWrite(SECU_ConfigDirectory(NULL)); - } else { - rv = NSS_Init(SECU_ConfigDirectory(NULL)); - } - if (rv != SECSuccess) { - SECU_PrintError(program_name, "NSS_Init failed"); - retval = -1; - goto prdone; - } - - /* Convert value into an item */ - data.data = (unsigned char *)value; - data.len = strlen(value); - - /* Get the encrypted result, either from the input file - * or from encrypting the plaintext value - */ - if (input_file) - { - if (verbose) printf("Reading data from %s\n", input_file); - - if (!strcmp(input_file, "-")) { - retval = readStdin(&result); - ascii = PR_TRUE; - } else { - retval = readInputFile(input_file, &result); - } - if (retval != 0) - goto loser; - if (ascii) { - /* input was base64 encoded. Decode it. */ - SECItem newResult = {0, 0, 0}; - SECItem *ok = NSSBase64_DecodeBuffer(NULL, &newResult, - (const char *)result.data, result.len); - if (!ok) { - SECU_PrintError(program_name, "Base 64 decode failed"); - retval = -1; - goto loser; - } - free(result.data); - result = *ok; - } - } - else - { - SECItem keyid = { 0, 0, 0 }; - SECItem outBuf = { 0, 0, 0 }; - PK11SlotInfo *slot = NULL; - - /* sigh, initialize the key database */ - slot = PK11_GetInternalKeySlot(); - if (slot && PK11_NeedUserInit(slot)) { - rv = SECU_ChangePW(slot, "", 0); - if (rv != SECSuccess) { - SECU_PrintError(program_name, "Failed to initialize slot \"%s\"", - PK11_GetSlotName(slot)); - return SECFailure; - } - } - if (slot) { - PK11_FreeSlot(slot); - } - - rv = PK11SDR_Encrypt(&keyid, &data, &result, 0); - if (rv != SECSuccess) { - if (verbose) - SECU_PrintError(program_name, "Encrypt operation failed\n"); - retval = -1; - goto loser; - } - - if (verbose) printf("Encrypted result is %d bytes long\n", result.len); - - if (!strcmp(output_file, "-")) { - ascii = PR_TRUE; - } - - if (ascii) { - /* base64 encode output. */ - char * newResult = NSSBase64_EncodeItem(NULL, NULL, 0, &result); - if (!newResult) { - SECU_PrintError(program_name, "Base 64 encode failed\n"); - retval = -1; - goto loser; - } - outBuf.data = (unsigned char *)newResult; - outBuf.len = strlen(newResult); - if (verbose) - printf("Base 64 encoded result is %d bytes long\n", outBuf.len); - } else { - outBuf = result; - } - - /* -v printf("Result is %.*s\n", text.len, text.data); */ - if (output_file) { - PRFileDesc *file; - PRInt32 count; - - if (verbose) printf("Writing result to %s\n", output_file); - if (!strcmp(output_file, "-")) { - file = PR_STDOUT; - } else { - /* Write to file */ - file = PR_Open(output_file, PR_CREATE_FILE|PR_WRONLY, 0666); - } - if (!file) { - if (verbose) - SECU_PrintError(program_name, - "Open of output file %s failed\n", - output_file); - retval = -1; - goto loser; - } - - count = PR_Write(file, outBuf.data, outBuf.len); - - if (file == PR_STDOUT) { - puts(""); - } else { - PR_Close(file); - } - - if (count != outBuf.len) { - if (verbose) SECU_PrintError(program_name, "Write failed\n"); - retval = -1; - goto loser; - } - if (ascii) { - free(outBuf.data); - } - } - } - - /* Decrypt the value */ - rv = PK11SDR_Decrypt(&result, &text, 0); - if (rv != SECSuccess) { - if (verbose) SECU_PrintError(program_name, "Decrypt operation failed\n"); - retval = -1; - goto loser; - } - - if (verbose) printf("Decrypted result is \"%.*s\"\n", text.len, text.data); - - /* Compare to required value */ - if (text.len != data.len || memcmp(data.data, text.data, text.len) != 0) - { - if (verbose) PR_fprintf(pr_stderr, "Comparison failed\n"); - retval = -1; - goto loser; - } - -loser: - if (text.data) free(text.data); - if (result.data) free(result.data); - if (NSS_Shutdown() != SECSuccess) { - exit(1); - } - -prdone: - PR_Cleanup (); - return retval; -} |