diff options
Diffstat (limited to 'security/nss/cmd/zlib')
34 files changed, 0 insertions, 8243 deletions
diff --git a/security/nss/cmd/zlib/Makefile b/security/nss/cmd/zlib/Makefile deleted file mode 100644 index fa46e6763..000000000 --- a/security/nss/cmd/zlib/Makefile +++ /dev/null @@ -1,75 +0,0 @@ -#! gmake -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# The Original Code is the Netscape security libraries. -# -# The Initial Developer of the Original Code is Netscape -# Communications Corporation. Portions created by Netscape are -# Copyright (C) 1994-2000 Netscape Communications Corporation. All -# Rights Reserved. -# -# Contributor(s): -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU General Public License Version 2 or later (the -# "GPL"), in which case the provisions of the GPL are applicable -# instead of those above. If you wish to allow use of your -# version of this file only under the terms of the GPL and not to -# allow others to use your version of this file under the MPL, -# indicate your decision by deleting the provisions above and -# replace them with the notice and other provisions required by -# the GPL. If you do not delete the provisions above, a recipient -# may use your version of this file under either the MPL or the -# GPL. -# - -####################################################################### -# (1) Include initial platform-independent assignments (MANDATORY). # -####################################################################### - -include manifest.mn - -####################################################################### -# (2) Include "global" configuration information. (OPTIONAL) # -####################################################################### - -include $(CORE_DEPTH)/coreconf/config.mk - -####################################################################### -# (3) Include "component" configuration information. (OPTIONAL) # -####################################################################### - - -####################################################################### -# (4) Include "local" platform-dependent assignments (OPTIONAL). # -####################################################################### - -include config.mk - -####################################################################### -# (5) Execute "global" rules. (OPTIONAL) # -####################################################################### - -include $(CORE_DEPTH)/coreconf/rules.mk - -####################################################################### -# (6) Execute "component" rules. (OPTIONAL) # -####################################################################### - - - -####################################################################### -# (7) Execute "local" rules. (OPTIONAL). # -####################################################################### - - - diff --git a/security/nss/cmd/zlib/README b/security/nss/cmd/zlib/README deleted file mode 100644 index 28adc90b2..000000000 --- a/security/nss/cmd/zlib/README +++ /dev/null @@ -1,99 +0,0 @@ -zlib 1.0.4 is a general purpose data compression library. All the code -is reentrant (thread safe). The data format used by the zlib library -is described by RFCs (Request for Comments) 1950 to 1952 in the files -ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate -format) and rfc1952.txt (gzip format). These documents are also available in -other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html - -All functions of the compression library are documented in the file -zlib.h. A usage example of the library is given in the file example.c -which also tests that the library is working correctly. Another -example is given in the file minigzip.c. The compression library itself -is composed of all source files except example.c and minigzip.c. - -To compile all files and run the test program, follow the instructions -given at the top of Makefile. In short "make test; make install" -should work for most machines. For MSDOS, use one of the special -makefiles such as Makefile.msc; for VMS, use Make_vms.com or descrip.mms. - -Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov> or, -if this fails, to the addresses given below in the Copyright section. -The zlib home page is http://quest.jpl.nasa.gov/zlib/ - -The changes made in version 1.0.4 are documented in the file ChangeLog. -The main changes since 1.0.3 are: - -- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF - bit, so the decompressor could decompress all the correct data but went - on to attempt decompressing extra garbage data. This affected minigzip too. -- zlibVersion and gzerror return const char* (needed for DLL) -- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) - - -A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk> -is in the CPAN (Comprehensive Perl Archive Network) sites, such as: -ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib* - - -Notes for some targets: - -- For Turbo C the small model is supported only with reduced performance to - avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 - -- For 64-bit Iris, deflate.c must be compiled without any optimization. - With -O, one libpng test fails. The test works in 32 bit mode (with - the -32 compiler flag). The compiler bug has been reported to SGI. - -- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 - it works when compiled with cc. - -- zlib doesn't work on HP-UX 9.05 with one cc compiler (the one not - accepting the -O option). It works with the other cc compiler. - -- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc - and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL - For help on building a zlib DLL, contact Alessandro Iacopetti - <iaco@email.alessandria.alpcom.it> http://lisa.unial.it/iaco , - or contact Brad Clarke <bclarke@cyberus.ca>. - -- gzdopen is not supported on RISCOS - - -Acknowledgments: - - The deflate format used by zlib was defined by Phil Katz. The deflate - and zlib specifications were written by Peter Deutsch. Thanks to all the - people who reported problems and suggested various improvements in zlib; - they are too numerous to cite here. - -Copyright notice: - - (C) 1995-1996 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - gzip@prep.ai.mit.edu madler@alumni.caltech.edu - -If you use the zlib library in a product, we would appreciate *not* -receiving lengthy legal documents to sign. The sources are provided -for free but without warranty of any kind. The library has been -entirely written by Jean-loup Gailly and Mark Adler; it does not -include third-party code. - -If you redistribute modified sources, we would appreciate that you include -in the file ChangeLog history information documenting your changes. diff --git a/security/nss/cmd/zlib/adler32.c b/security/nss/cmd/zlib/adler32.c deleted file mode 100644 index 9f4afd63c..000000000 --- a/security/nss/cmd/zlib/adler32.c +++ /dev/null @@ -1,48 +0,0 @@ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* $Id$ */ - -#include "zlib.h" - -#define BASE 65521L /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* ========================================================================= */ -PR_PUBLIC_API(uLong) adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; - - if (buf == Z_NULL) return 1L; - - while (len > 0) { - k = len < NMAX ? len : NMAX; - len -= k; - while (k >= 16) { - DO16(buf); - buf += 16; - k -= 16; - } - if (k != 0) do { - s1 += *buf++; - s2 += s1; - } while (--k); - s1 %= BASE; - s2 %= BASE; - } - return (s2 << 16) | s1; -} diff --git a/security/nss/cmd/zlib/compress.c b/security/nss/cmd/zlib/compress.c deleted file mode 100644 index 3e1cc7c09..000000000 --- a/security/nss/cmd/zlib/compress.c +++ /dev/null @@ -1,57 +0,0 @@ -/* compress.c -- compress a memory buffer - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* $Id$ */ - -#include "zlib.h" - -/* =========================================================================== - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least 0.1% larger than - sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ -PR_PUBLIC_API(int) compress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; -{ - z_stream stream; - int err; - - stream.next_in = (Bytef*)source; - stream.avail_in = (uInt)sourceLen; -#ifdef MAXSEG_64K - /* Check for source > 64K on 16-bit machine: */ - if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; -#endif - stream.next_out = dest; - stream.avail_out = (uInt)*destLen; - if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - stream.opaque = (voidpf)0; - - err = deflateInit(&stream, Z_DEFAULT_COMPRESSION); - if (err != Z_OK) return err; - - err = deflate(&stream, Z_FINISH); - if (err != Z_STREAM_END) { - deflateEnd(&stream); - return err == Z_OK ? Z_BUF_ERROR : err; - } - *destLen = stream.total_out; - - err = deflateEnd(&stream); - return err; -} diff --git a/security/nss/cmd/zlib/config.mk b/security/nss/cmd/zlib/config.mk deleted file mode 100644 index 090b93d70..000000000 --- a/security/nss/cmd/zlib/config.mk +++ /dev/null @@ -1,67 +0,0 @@ -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# The Original Code is the Netscape security libraries. -# -# The Initial Developer of the Original Code is Netscape -# Communications Corporation. Portions created by Netscape are -# Copyright (C) 1994-2000 Netscape Communications Corporation. All -# Rights Reserved. -# -# Contributor(s): -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU General Public License Version 2 or later (the -# "GPL"), in which case the provisions of the GPL are applicable -# instead of those above. If you wish to allow use of your -# version of this file only under the terms of the GPL and not to -# allow others to use your version of this file under the MPL, -# indicate your decision by deleting the provisions above and -# replace them with the notice and other provisions required by -# the GPL. If you do not delete the provisions above, a recipient -# may use your version of this file under either the MPL or the -# GPL. -# - -# -# Currently, override TARGETS variable so that only static libraries -# are specifed as dependencies within rules.mk. -# - -TARGETS = $(LIBRARY) -SHARED_LIBRARY = -IMPORT_LIBRARY = -PROGRAM = - -####################################################################### -# Set the LDFLAGS value to encompass all normal link options, all # -# library names, and all special system linking options # -####################################################################### - -SECTOOLS_LIBS = $(LDOPTS) $(LIBSSL) $(LIBPKCS7) $(LIBCERT) $(LIBKEY) $(LIBSECMOD) $(LIBCRYPTO) $(LIBSECUTIL) $(LIBSECMOD) $(LIBSSL) $(LIBPKCS7) $(LIBCERT) $(LIBKEY) $(LIBCRYPTO) $(LIBSECUTIL) $(LIBHASH) $(LIBDBM) $(DLLPLC) $(DLLPLDS) $(DLLPR) $(DLLSYSTEM) - -ifeq ($(OS_ARCH),AIX) - OS_LIBS += $(SECTOOLS_LIBS) -endif - -ifeq ($(OS_ARCH),NCR) - OS_LIBS += $(SECTOOLS_LIBS) -endif - -ifeq ($(OS_ARCH),SCO_SV) - OS_LIBS += $(SECTOOLS_LIBS) -endif - -LDFLAGS += $(SECTOOLS_LIBS) - - - - diff --git a/security/nss/cmd/zlib/crc32.c b/security/nss/cmd/zlib/crc32.c deleted file mode 100644 index 398871cf8..000000000 --- a/security/nss/cmd/zlib/crc32.c +++ /dev/null @@ -1,162 +0,0 @@ -/* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* $Id$ */ - -#include "zlib.h" - -#define local static - -#ifdef DYNAMIC_CRC_TABLE - -local int crc_table_empty = 1; -local uLongf crc_table[256]; -local void make_crc_table OF((void)); - -/* - Generate a table for a byte-wise 32-bit CRC calculation on the polynomial: - x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. - - Polynomials over GF(2) are represented in binary, one bit per coefficient, - with the lowest powers in the most significant bit. Then adding polynomials - is just exclusive-or, and multiplying a polynomial by x is a right shift by - one. If we call the above polynomial p, and represent a byte as the - polynomial q, also with the lowest power in the most significant bit (so the - byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, - where a mod b means the remainder after dividing a by b. - - This calculation is done using the shift-register method of multiplying and - taking the remainder. The register is initialized to zero, and for each - incoming bit, x^32 is added mod p to the register if the bit is a one (where - x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by - x (which is shifting right by one and adding x^32 mod p if the bit shifted - out is a one). We start with the highest power (least significant bit) of - q and repeat for all eight bits of q. - - The table is simply the CRC of all possible eight bit values. This is all - the information needed to generate CRC's on data a byte at a time for all - combinations of CRC register values and incoming bytes. -*/ -local void make_crc_table() -{ - uLong c; - int n, k; - uLong poly; /* polynomial exclusive-or pattern */ - /* terms of polynomial defining this crc (except x^32): */ - static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* make exclusive-or pattern from polynomial (0xedb88320L) */ - poly = 0L; - for (n = 0; n < sizeof(p)/sizeof(Byte); n++) - poly |= 1L << (31 - p[n]); - - for (n = 0; n < 256; n++) - { - c = (uLong)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[n] = c; - } - crc_table_empty = 0; -} -#else -/* ======================================================================== - * Table of CRC-32's of all single-byte values (made by make_crc_table) - */ -local uLongf crc_table[256] = { - 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, - 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, - 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, - 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, - 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, - 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, - 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, - 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, - 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, - 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, - 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, - 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, - 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, - 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, - 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, - 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, - 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, - 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, - 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, - 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, - 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, - 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, - 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, - 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, - 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, - 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, - 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, - 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, - 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, - 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, - 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, - 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, - 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, - 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, - 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, - 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, - 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, - 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, - 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, - 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, - 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, - 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, - 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, - 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, - 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, - 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, - 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, - 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, - 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, - 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, - 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, - 0x2d02ef8dL -}; -#endif - -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -uLongf *get_crc_table() -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) make_crc_table(); -#endif - return (uLongf *)crc_table; -} - -/* ========================================================================= */ -#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); -#define DO2(buf) DO1(buf); DO1(buf); -#define DO4(buf) DO2(buf); DO2(buf); -#define DO8(buf) DO4(buf); DO4(buf); - -/* ========================================================================= */ -PR_PUBLIC_API(uLong) crc32(crc, buf, len) - uLong crc; - const Bytef *buf; - uInt len; -{ - if (buf == Z_NULL) return 0L; -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif - crc = crc ^ 0xffffffffUL; - while (len >= 8) - { - DO8(buf); - len -= 8; - } - if (len) do { - DO1(buf); - } while (--len); - return crc ^ 0xffffffffUL; -} diff --git a/security/nss/cmd/zlib/deflate.c b/security/nss/cmd/zlib/deflate.c deleted file mode 100644 index f748ce156..000000000 --- a/security/nss/cmd/zlib/deflate.c +++ /dev/null @@ -1,1209 +0,0 @@ -/* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* - * ALGORITHM - * - * The "deflation" process depends on being able to identify portions - * of the input text which are identical to earlier input (within a - * sliding window trailing behind the input currently being processed). - * - * The most straightforward technique turns out to be the fastest for - * most input files: try all possible matches and select the longest. - * The key feature of this algorithm is that insertions into the string - * dictionary are very simple and thus fast, and deletions are avoided - * completely. Insertions are performed at each input character, whereas - * string matches are performed only when the previous match ends. So it - * is preferable to spend more time in matches to allow very fast string - * insertions and avoid deletions. The matching algorithm for small - * strings is inspired from that of Rabin & Karp. A brute force approach - * is used to find longer strings when a small match has been found. - * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze - * (by Leonid Broukhis). - * A previous version of this file used a more sophisticated algorithm - * (by Fiala and Greene) which is guaranteed to run in linear amortized - * time, but has a larger average cost, uses more memory and is patented. - * However the F&G algorithm may be faster for some highly redundant - * files if the parameter max_chain_length (described below) is too large. - * - * ACKNOWLEDGEMENTS - * - * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and - * I found it in 'freeze' written by Leonid Broukhis. - * Thanks to many people for bug reports and testing. - * - * REFERENCES - * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc - * - * A description of the Rabin and Karp algorithm is given in the book - * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. - * - * Fiala,E.R., and Greene,D.H. - * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 - * - */ - -/* $Id$ */ - -#include "deflate.h" - -char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* =========================================================================== - * Function prototypes. - */ -typedef enum { - need_more, /* block not completed, need more input or more output */ - block_done, /* block flush performed */ - finish_started, /* finish started, need only more output at next deflate */ - finish_done /* finish done, accept no more input or output */ -} block_state; - -typedef block_state (*compress_func) OF((deflate_state *s, int flush)); -/* Compression function. Returns the block state after the call. */ - -local void fill_window OF((deflate_state *s)); -local block_state deflate_stored OF((deflate_state *s, int flush)); -local block_state deflate_fast OF((deflate_state *s, int flush)); -local block_state deflate_slow OF((deflate_state *s, int flush)); -local void lm_init OF((deflate_state *s)); -local uInt longest_match OF((deflate_state *s, IPos cur_match)); -local void putShortMSB OF((deflate_state *s, uInt b)); -local void flush_pending OF((z_streamp strm)); -local int read_buf OF((z_streamp strm, charf *buf, unsigned size)); -#ifdef ASMV - void match_init OF((void)); /* asm code initialization */ -#endif - -#ifdef DEBUG_NEVER -local void check_match OF((deflate_state *s, IPos start, IPos match, - int length)); -#endif - -/* =========================================================================== - * Local data - */ - -#define NIL 0 -/* Tail of hash chains */ - -#ifndef TOO_FAR -# define TOO_FAR 4096 -#endif -/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -/* Values for max_lazy_match, good_match and max_chain_length, depending on - * the desired pack level (0..9). The values given below have been tuned to - * exclude worst case performance for pathological files. Better values may be - * found for specific files. - */ -typedef struct config_s { - ush good_length; /* reduce lazy search above this match length */ - ush max_lazy; /* do not perform lazy search above this match length */ - ush nice_length; /* quit search above this match length */ - ush max_chain; - compress_func func; -} config; - -local config configuration_table[10] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */ -/* 2 */ {4, 5, 16, 8, deflate_fast}, -/* 3 */ {4, 6, 32, 32, deflate_fast}, - -/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ -/* 5 */ {8, 16, 32, 32, deflate_slow}, -/* 6 */ {8, 16, 128, 128, deflate_slow}, -/* 7 */ {8, 32, 128, 256, deflate_slow}, -/* 8 */ {32, 128, 258, 1024, deflate_slow}, -/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */ - -/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 - * For deflate_fast() (levels <= 3) good is ignored and lazy has a different - * meaning. - */ - -#define EQUAL 0 -/* result of memcmp for equal strings */ - -struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ - -/* =========================================================================== - * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive - * input characters, so that a running hash key can be computed from the - * previous key instead of complete recalculation each time. - */ -#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask) - - -/* =========================================================================== - * Insert string str in the dictionary and set match_head to the previous head - * of the hash chain (the most recent string with same hash key). Return - * the previous length of the hash chain. - * IN assertion: all calls to to INSERT_STRING are made with consecutive - * input characters and the first MIN_MATCH bytes of str are valid - * (except for the last MIN_MATCH-1 bytes of the input file). - */ -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) - -/* =========================================================================== - * Initialize the hash table (avoiding 64K overflow for 16 bit systems). - * prev[] will be initialized on the fly. - */ -#define CLEAR_HASH(s) \ - s->head[s->hash_size-1] = NIL; \ - zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateInit_(strm, level, version, stream_size) - z_streamp strm; - int level; - const char *version; - int stream_size; -{ - return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, - Z_DEFAULT_STRATEGY, version, stream_size); - /* To do: ignore strm->next_in if we use it as window */ -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateInit2_(strm, level, method, windowBits, memLevel, strategy, - version, stream_size) - z_streamp strm; - int level; - int method; - int windowBits; - int memLevel; - int strategy; - const char *version; - int stream_size; -{ - deflate_state *s; - int noheader = 0; - - ushf *overlay; - /* We overlay pending_buf and d_buf+l_buf. This works since the average - * output size for (length,distance) codes is <= 24 bits. - */ - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != sizeof(z_stream)) { - return Z_VERSION_ERROR; - } - if (strm == Z_NULL) return Z_STREAM_ERROR; - - strm->msg = Z_NULL; - if (strm->zalloc == Z_NULL) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == Z_NULL) strm->zfree = zcfree; - - if (level == Z_DEFAULT_COMPRESSION) level = 6; - - if (windowBits < 0) { /* undocumented feature: suppress zlib header */ - noheader = 1; - windowBits = -windowBits; - } - if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || - windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || - strategy < 0 || strategy > Z_HUFFMAN_ONLY) { - return Z_STREAM_ERROR; - } - s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); - if (s == Z_NULL) return Z_MEM_ERROR; - strm->state = (struct internal_state FAR *)s; - s->strm = strm; - - s->noheader = noheader; - s->w_bits = windowBits; - s->w_size = 1 << s->w_bits; - s->w_mask = s->w_size - 1; - - s->hash_bits = memLevel + 7; - s->hash_size = 1 << s->hash_bits; - s->hash_mask = s->hash_size - 1; - s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); - - s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); - s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); - s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); - - s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ - - overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); - s->pending_buf = (uchf *) overlay; - - if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || - s->pending_buf == Z_NULL) { - strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); - deflateEnd (strm); - return Z_MEM_ERROR; - } - s->d_buf = overlay + s->lit_bufsize/sizeof(ush); - s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; - - s->level = level; - s->strategy = strategy; - s->method = (Byte)method; - - return deflateReset(strm); -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateSetDictionary (strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -{ - deflate_state *s; - uInt length = dictLength; - uInt n; - IPos hash_head = 0; - - if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || - strm->state->status != INIT_STATE) return Z_STREAM_ERROR; - - s = strm->state; - strm->adler = adler32(strm->adler, dictionary, dictLength); - - if (length < MIN_MATCH) return Z_OK; - if (length > MAX_DIST(s)) { - length = MAX_DIST(s); - dictionary += dictLength - length; - } - zmemcpy((charf *)s->window, dictionary, length); - s->strstart = length; - s->block_start = (long)length; - - /* Insert all strings in the hash table (except for the last two bytes). - * s->lookahead stays null, so s->ins_h will be recomputed at the next - * call of fill_window. - */ - s->ins_h = s->window[0]; - UPDATE_HASH(s, s->ins_h, s->window[1]); - for (n = 0; n <= length - MIN_MATCH; n++) { - INSERT_STRING(s, n, hash_head); - } - if (hash_head) hash_head = 0; /* to make compiler happy */ - return Z_OK; -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateReset (strm) - z_streamp strm; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR; - - strm->total_in = strm->total_out = 0; - strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ - strm->data_type = Z_UNKNOWN; - - s = (deflate_state *)strm->state; - s->pending = 0; - s->pending_out = s->pending_buf; - - if (s->noheader < 0) { - s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */ - } - s->status = s->noheader ? BUSY_STATE : INIT_STATE; - strm->adler = 1; - s->last_flush = Z_NO_FLUSH; - - _tr_init(s); - lm_init(s); - - return Z_OK; -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateParams(strm, level, strategy) - z_streamp strm; - int level; - int strategy; -{ - deflate_state *s; - compress_func func; - int err = Z_OK; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - - if (level == Z_DEFAULT_COMPRESSION) { - level = 6; - } - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) { - return Z_STREAM_ERROR; - } - func = configuration_table[s->level].func; - - if (func != configuration_table[level].func && strm->total_in != 0) { - /* Flush the last buffer: */ - err = deflate(strm, Z_PARTIAL_FLUSH); - } - if (s->level != level) { - s->level = level; - s->max_lazy_match = configuration_table[level].max_lazy; - s->good_match = configuration_table[level].good_length; - s->nice_match = configuration_table[level].nice_length; - s->max_chain_length = configuration_table[level].max_chain; - } - s->strategy = strategy; - return err; -} - -/* ========================================================================= - * Put a short in the pending buffer. The 16-bit value is put in MSB order. - * IN assertion: the stream state is correct and there is enough room in - * pending_buf. - */ -local void putShortMSB (s, b) - deflate_state *s; - uInt b; -{ - put_byte(s, (Byte)(b >> 8)); - put_byte(s, (Byte)(b & 0xff)); -} - -/* ========================================================================= - * Flush as much pending output as possible. All deflate() output goes - * through this function so some applications may wish to modify it - * to avoid allocating a large strm->next_out buffer and copying into it. - * (See also read_buf()). - */ -local void flush_pending(strm) - z_streamp strm; -{ - unsigned len = strm->state->pending; - - if (len > strm->avail_out) len = strm->avail_out; - if (len == 0) return; - - zmemcpy(strm->next_out, strm->state->pending_out, len); - strm->next_out += len; - strm->state->pending_out += len; - strm->total_out += len; - strm->avail_out -= len; - strm->state->pending -= len; - if (strm->state->pending == 0) { - strm->state->pending_out = strm->state->pending_buf; - } -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflate (strm, flush) - z_streamp strm; - int flush; -{ - int old_flush; /* value of flush param for previous deflate call */ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - flush > Z_FINISH || flush < 0) { - return Z_STREAM_ERROR; - } - s = strm->state; - - if (strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0) || - (s->status == FINISH_STATE && flush != Z_FINISH)) { - ERR_RETURN(strm, Z_STREAM_ERROR); - } - if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); - - s->strm = strm; /* just in case */ - old_flush = s->last_flush; - s->last_flush = flush; - - /* Write the zlib header */ - if (s->status == INIT_STATE) { - - uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; - uInt level_flags = (s->level-1) >> 1; - - if (level_flags > 3) level_flags = 3; - header |= (level_flags << 6); - if (s->strstart != 0) header |= PRESET_DICT; - header += 31 - (header % 31); - - s->status = BUSY_STATE; - putShortMSB(s, header); - - /* Save the adler32 of the preset dictionary: */ - if (s->strstart != 0) { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - strm->adler = 1L; - } - - /* Flush as much pending output as possible */ - if (s->pending != 0) { - flush_pending(strm); - if (strm->avail_out == 0) { - /* Since avail_out is 0, deflate will be called again with - * more output space, but possibly with both pending and - * avail_in equal to zero. There won't be anything to do, - * but this is not an error situation so make sure we - * return OK instead of BUF_ERROR at next call of deflate: - */ - s->last_flush = -1; - return Z_OK; - } - - /* Make sure there is something to do and avoid duplicate consecutive - * flushes. For repeated and useless calls with Z_FINISH, we keep - * returning Z_STREAM_END instead of Z_BUFF_ERROR. - */ - } else if (strm->avail_in == 0 && flush <= old_flush && - flush != Z_FINISH) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* User must not provide more input after the first FINISH: */ - if (s->status == FINISH_STATE && strm->avail_in != 0) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* Start a new block or continue the current one. - */ - if (strm->avail_in != 0 || s->lookahead != 0 || - (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { - block_state bstate; - - bstate = (*(configuration_table[s->level].func))(s, flush); - - if (bstate == finish_started || bstate == finish_done) { - s->status = FINISH_STATE; - } - if (bstate == need_more || bstate == finish_started) { - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ - } - return Z_OK; - /* If flush != Z_NO_FLUSH && avail_out == 0, the next call - * of deflate should use the same flush parameter to make sure - * that the flush is complete. So we don't have to output an - * empty block here, this will be done at next call. This also - * ensures that for a very small output buffer, we emit at most - * one empty block. - */ - } - if (bstate == block_done) { - if (flush == Z_PARTIAL_FLUSH) { - _tr_align(s); - } else { /* FULL_FLUSH or SYNC_FLUSH */ - _tr_stored_block(s, (char*)0, 0L, 0); - /* For a full flush, this empty block will be recognized - * as a special marker by inflate_sync(). - */ - if (flush == Z_FULL_FLUSH) { - CLEAR_HASH(s); /* forget history */ - } - } - flush_pending(strm); - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ - return Z_OK; - } - } - } - Assert(strm->avail_out > 0, "bug2"); - - if (flush != Z_FINISH) return Z_OK; - if (s->noheader) return Z_STREAM_END; - - /* Write the zlib trailer (adler32) */ - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - flush_pending(strm); - /* If avail_out is zero, the application will call deflate again - * to flush the rest. - */ - s->noheader = -1; /* write the trailer only once! */ - return s->pending != 0 ? Z_OK : Z_STREAM_END; -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateEnd (strm) - z_streamp strm; -{ - int status; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - - /* Deallocate in reverse order of allocations: */ - TRY_FREE(strm, strm->state->pending_buf); - TRY_FREE(strm, strm->state->head); - TRY_FREE(strm, strm->state->prev); - TRY_FREE(strm, strm->state->window); - - status = strm->state->status; - ZFREE(strm, strm->state); - strm->state = Z_NULL; - - return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; -} - -/* ========================================================================= */ -PR_PUBLIC_API(int) deflateCopy (dest, source) - z_streamp dest; - z_streamp source; -{ - if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { - return Z_STREAM_ERROR; - } - *dest = *source; - return Z_STREAM_ERROR; /* to be implemented */ -#if 0 - dest->state = (struct internal_state FAR *) - (*dest->zalloc)(1, sizeof(deflate_state)); - if (dest->state == Z_NULL) return Z_MEM_ERROR; - - *(dest->state) = *(source->state); - return Z_OK; -#endif -} - -/* =========================================================================== - * Read a new buffer from the current input stream, update the adler32 - * and total number of bytes read. All deflate() input goes through - * this function so some applications may wish to modify it to avoid - * allocating a large strm->next_in buffer and copying from it. - * (See also flush_pending()). - */ -local int read_buf(strm, buf, size) - z_streamp strm; - charf *buf; - unsigned size; -{ - unsigned len = strm->avail_in; - - if (len > size) len = size; - if (len == 0) return 0; - - strm->avail_in -= len; - - if (!strm->state->noheader) { - strm->adler = adler32(strm->adler, strm->next_in, len); - } - zmemcpy(buf, strm->next_in, len); - strm->next_in += len; - strm->total_in += len; - - return (int)len; -} - -/* =========================================================================== - * Initialize the "longest match" routines for a new zlib stream - */ -local void lm_init (s) - deflate_state *s; -{ - s->window_size = (ulg)2L*s->w_size; - - CLEAR_HASH(s); - - /* Set the default configuration parameters: - */ - s->max_lazy_match = configuration_table[s->level].max_lazy; - s->good_match = configuration_table[s->level].good_length; - s->nice_match = configuration_table[s->level].nice_length; - s->max_chain_length = configuration_table[s->level].max_chain; - - s->strstart = 0; - s->block_start = 0L; - s->lookahead = 0; - s->match_length = s->prev_length = MIN_MATCH-1; - s->match_available = 0; - s->ins_h = 0; -#ifdef ASMV - match_init(); /* initialize the asm code */ -#endif -} - -/* =========================================================================== - * Set match_start to the longest match starting at the given string and - * return its length. Matches shorter or equal to prev_length are discarded, - * in which case the result is equal to prev_length and match_start is - * garbage. - * IN assertions: cur_match is the head of the hash chain for the current - * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 - * OUT assertion: the match length is not greater than s->lookahead. - */ -#ifndef ASMV -/* For 80x86 and 680x0, an optimized version will be provided in match.asm or - * match.S. The code will be functionally equivalent. - */ -local uInt longest_match(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - unsigned chain_length = s->max_chain_length;/* max hash chain length */ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - int best_len = s->prev_length; /* best match length so far */ - int nice_match = s->nice_match; /* stop if match long enough */ - IPos limit = s->strstart > (IPos)MAX_DIST(s) ? - s->strstart - (IPos)MAX_DIST(s) : NIL; - /* Stop when cur_match becomes <= limit. To simplify the code, - * we prevent matches with the string of window index 0. - */ - Posf *prev = s->prev; - uInt wmask = s->w_mask; - -#ifdef UNALIGNED_OK - /* Compare two bytes at a time. Note: this is not always beneficial. - * Try with and without -DUNALIGNED_OK to check. - */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; - register ush scan_start = *(ushf*)scan; - register ush scan_end = *(ushf*)(scan+best_len-1); -#else - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - register Byte scan_end1 = scan[best_len-1]; - register Byte scan_end = scan[best_len]; -#endif - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - /* Do not waste too much time if we already have a good match: */ - if (s->prev_length >= s->good_match) { - chain_length >>= 2; - } - /* Do not look for matches beyond the end of the input. This is necessary - * to make deflate deterministic. - */ - if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - do { - Assert(cur_match < s->strstart, "no future"); - match = s->window + cur_match; - - /* Skip to next match if the match length cannot increase - * or if the match length is less than 2: - */ -#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) - /* This code assumes sizeof(unsigned short) == 2. Do not use - * UNALIGNED_OK if your compiler uses a different size. - */ - if (*(ushf*)(match+best_len-1) != scan_end || - *(ushf*)match != scan_start) continue; - - /* It is not necessary to compare scan[2] and match[2] since they are - * always equal when the other bytes match, given that the hash keys - * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at - * strstart+3, +5, ... up to strstart+257. We check for insufficient - * lookahead only every 4th comparison; the 128th check will be made - * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is - * necessary to put more guard bytes at the end of the window, or - * to check more often for insufficient lookahead. - */ - Assert(scan[2] == match[2], "scan[2]?"); - scan++, match++; - do { - } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - scan < strend); - /* The funny "do {}" generates better code on most compilers */ - - /* Here, scan <= window+strstart+257 */ - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - if (*scan == *match) scan++; - - len = (MAX_MATCH - 1) - (int)(strend-scan); - scan = strend - (MAX_MATCH-1); - -#else /* UNALIGNED_OK */ - - if (match[best_len] != scan_end || - match[best_len-1] != scan_end1 || - *match != *scan || - *++match != scan[1]) continue; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match++; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - scan = strend - MAX_MATCH; - -#endif /* UNALIGNED_OK */ - - if (len > best_len) { - s->match_start = cur_match; - best_len = len; - if (len >= nice_match) break; -#ifdef UNALIGNED_OK - scan_end = *(ushf*)(scan+best_len-1); -#else - scan_end1 = scan[best_len-1]; - scan_end = scan[best_len]; -#endif - } - } while ((cur_match = prev[cur_match & wmask]) > limit - && --chain_length != 0); - - if ((uInt)best_len <= s->lookahead) return best_len; - return s->lookahead; -} -#endif /* ASMV */ - -#ifdef DEBUG_NEVER -/* =========================================================================== - * Check that the match at match_start is indeed a match. - */ -local void check_match(s, start, match, length) - deflate_state *s; - IPos start, match; - int length; -{ - /* check that the match is indeed a match */ - if (zmemcmp((charf *)s->window + match, - (charf *)s->window + start, length) != EQUAL) { -#if 0 - fprintf(stderr, " start %u, match %u, length %d\n", - start, match, length); -#endif - do { - fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); - } while (--length != 0); - z_error("invalid match"); - } - if (verbose > 1) { - fprintf(stderr,"\\[%d,%d]", start-match, length); - do { putc(s->window[start++], stderr); } while (--length != 0); - } -} -#else -# define check_match(s, start, match, length) -#endif - -/* =========================================================================== - * Fill the window when the lookahead becomes insufficient. - * Updates strstart and lookahead. - * - * IN assertion: lookahead < MIN_LOOKAHEAD - * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD - * At least one byte has been read, or avail_in == 0; reads are - * performed for at least two bytes (required for the zip translate_eol - * option -- not supported here). - */ -local void fill_window(s) - deflate_state *s; -{ - register unsigned n, m; - register Posf *p; - unsigned more; /* Amount of free space at the end of the window. */ - uInt wsize = s->w_size; - - do { - more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); - - /* Deal with !@#$% 64K limit: */ - if (more == 0 && s->strstart == 0 && s->lookahead == 0) { - more = wsize; - - } else if (more == (unsigned)(-1)) { - /* Very unlikely, but possible on 16 bit machine if strstart == 0 - * and lookahead == 1 (input done one byte at time) - */ - more--; - - /* If the window is almost full and there is insufficient lookahead, - * move the upper half to the lower one to make room in the upper half. - */ - } else if (s->strstart >= wsize+MAX_DIST(s)) { - - zmemcpy((charf *)s->window, (charf *)s->window+wsize, - (unsigned)wsize); - s->match_start -= wsize; - s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ - - s->block_start -= (long) wsize; - - /* Slide the hash table (could be avoided with 32 bit values - at the expense of memory usage): - */ - n = s->hash_size; - p = &s->head[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - } while (--n); - - n = wsize; - p = &s->prev[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - /* If n is not on any hash chain, prev[n] is garbage but - * its value will never be used. - */ - } while (--n); - - more += wsize; - } - if (s->strm->avail_in == 0) return; - - /* If there was no sliding: - * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && - * more == window_size - lookahead - strstart - * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) - * => more >= window_size - 2*WSIZE + 2 - * In the BIG_MEM or MMAP case (not yet supported), - * window_size == input_size + MIN_LOOKAHEAD && - * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. - * Otherwise, window_size == 2*WSIZE so more >= 2. - * If there was sliding, more >= WSIZE. So in all cases, more >= 2. - */ - Assert(more >= 2, "more < 2"); - - n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead, - more); - s->lookahead += n; - - /* Initialize the hash value now that we have some input: */ - if (s->lookahead >= MIN_MATCH) { - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - } - /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, - * but this is not important since only literal bytes will be emitted. - */ - - } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); -} - -/* =========================================================================== - * Flush the current block, with given end-of-file flag. - * IN assertion: strstart is set to the end of the current match. - */ -#define FLUSH_BLOCK_ONLY(s, eof) { \ - _tr_flush_block(s, (s->block_start >= 0L ? \ - (charf *)&s->window[(unsigned)s->block_start] : \ - (charf *)Z_NULL), \ - (ulg)((long)s->strstart - s->block_start), \ - (eof)); \ - s->block_start = s->strstart; \ - flush_pending(s->strm); \ - Tracev((stderr,"[FLUSH]")); \ -} - -/* Same but force premature exit if necessary. */ -#define FLUSH_BLOCK(s, eof) { \ - FLUSH_BLOCK_ONLY(s, eof); \ - if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ -} - -/* =========================================================================== - * Copy without compression as much as possible from the input stream, return - * the current block state. - * This function does not insert new strings in the dictionary since - * uncompressible data is probably not useful. This function is used - * only for the level=0 compression option. - * NOTE: this function should be optimized to avoid extra copying. - */ -local block_state deflate_stored(s, flush) - deflate_state *s; - int flush; -{ - for (;;) { - /* Fill the window as much as possible: */ - if (s->lookahead <= 1) { - - Assert(s->strstart < s->w_size+MAX_DIST(s) || - s->block_start >= (long)s->w_size, "slide too late"); - - fill_window(s); - if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; - - if (s->lookahead == 0) break; /* flush the current block */ - } - Assert(s->block_start >= 0L, "block gone"); - - s->strstart += s->lookahead; - s->lookahead = 0; - - /* Stored blocks are limited to 0xffff bytes: */ - if (s->strstart == 0 || s->strstart > 0xfffe) { - /* strstart == 0 is possible when wraparound on 16-bit machine */ - s->lookahead = s->strstart - 0xffff; - s->strstart = 0xffff; - } - - /* Emit a stored block if it is large enough: */ - if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { - FLUSH_BLOCK(s, 0); - } - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -/* =========================================================================== - * Compress as much as possible from the input stream, return the current - * block state. - * This function does not perform lazy evaluation of matches and inserts - * new strings in the dictionary only for unmatched strings or for short - * matches. It is used only for the fast compression options. - */ -local block_state deflate_fast(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of the hash chain */ - int bflush; /* set if current block must be flushed */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - * At this point we have always match_length < MIN_MATCH - */ - if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - if (s->strategy != Z_HUFFMAN_ONLY) { - s->match_length = longest_match (s, hash_head); - } - /* longest_match() sets match_start */ - } - if (s->match_length >= MIN_MATCH) { - check_match(s, s->strstart, s->match_start, s->match_length); - - bflush = _tr_tally(s, s->strstart - s->match_start, - s->match_length - MIN_MATCH); - - s->lookahead -= s->match_length; - - /* Insert new strings in the hash table only if the match length - * is not too large. This saves time but degrades compression. - */ - if (s->match_length <= s->max_insert_length && - s->lookahead >= MIN_MATCH) { - s->match_length--; /* string at strstart already in hash table */ - do { - s->strstart++; - INSERT_STRING(s, s->strstart, hash_head); - /* strstart never exceeds WSIZE-MAX_MATCH, so there are - * always MIN_MATCH bytes ahead. - */ - } while (--s->match_length != 0); - s->strstart++; - } else { - s->strstart += s->match_length; - s->match_length = 0; - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not - * matter since it will be recomputed at next deflate call. - */ - } - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - bflush = _tr_tally (s, 0, s->window[s->strstart]); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -/* =========================================================================== - * Same as above, but achieves better compression. We use a lazy - * evaluation for matches: a match is finally adopted only if there is - * no better match at the next window position. - */ -local block_state deflate_slow(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of hash chain */ - int bflush; /* set if current block must be flushed */ - - /* Process the input block. */ - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - */ - s->prev_length = s->match_length, s->prev_match = s->match_start; - s->match_length = MIN_MATCH-1; - - if (hash_head != NIL && s->prev_length < s->max_lazy_match && - s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - if (s->strategy != Z_HUFFMAN_ONLY) { - s->match_length = longest_match (s, hash_head); - } - /* longest_match() sets match_start */ - - if (s->match_length <= 5 && (s->strategy == Z_FILTERED || - (s->match_length == MIN_MATCH && - s->strstart - s->match_start > TOO_FAR))) { - - /* If prev_match is also MIN_MATCH, match_start is garbage - * but we will ignore the current match anyway. - */ - s->match_length = MIN_MATCH-1; - } - } - /* If there was a match at the previous step and the current - * match is not better, output the previous match: - */ - if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { - uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; - /* Do not insert strings in hash table beyond this. */ - - check_match(s, s->strstart-1, s->prev_match, s->prev_length); - - bflush = _tr_tally(s, s->strstart -1 - s->prev_match, - s->prev_length - MIN_MATCH); - - /* Insert in hash table all strings up to the end of the match. - * strstart-1 and strstart are already inserted. If there is not - * enough lookahead, the last two strings are not inserted in - * the hash table. - */ - s->lookahead -= s->prev_length-1; - s->prev_length -= 2; - do { - if (++s->strstart <= max_insert) { - INSERT_STRING(s, s->strstart, hash_head); - } - } while (--s->prev_length != 0); - s->match_available = 0; - s->match_length = MIN_MATCH-1; - s->strstart++; - - if (bflush) FLUSH_BLOCK(s, 0); - - } else if (s->match_available) { - /* If there was no match at the previous position, output a - * single literal. If there was a match but the current match - * is longer, truncate the previous match to a single literal. - */ - Tracevv((stderr,"%c", s->window[s->strstart-1])); - if (_tr_tally (s, 0, s->window[s->strstart-1])) { - FLUSH_BLOCK_ONLY(s, 0); - } - s->strstart++; - s->lookahead--; - if (s->strm->avail_out == 0) return need_more; - } else { - /* There is no previous match to compare with, wait for - * the next step to decide. - */ - s->match_available = 1; - s->strstart++; - s->lookahead--; - } - } - Assert (flush != Z_NO_FLUSH, "no flush?"); - if (s->match_available) { - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally (s, 0, s->window[s->strstart-1]); - s->match_available = 0; - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} diff --git a/security/nss/cmd/zlib/deflate.h b/security/nss/cmd/zlib/deflate.h deleted file mode 100644 index 410b21984..000000000 --- a/security/nss/cmd/zlib/deflate.h +++ /dev/null @@ -1,275 +0,0 @@ -/* deflate.h -- internal compression state - * Copyright (C) 1995-1996 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* $Id$ */ - -#ifndef _DEFLATE_H -#define _DEFLATE_H - -#include "zutil.h" - -/* =========================================================================== - * Internal compression state. - */ - -#define LENGTH_CODES 29 -/* number of length codes, not counting the special END_BLOCK code */ - -#define LITERALS 256 -/* number of literal bytes 0..255 */ - -#define L_CODES (LITERALS+1+LENGTH_CODES) -/* number of Literal or Length codes, including the END_BLOCK code */ - -#define D_CODES 30 -/* number of distance codes */ - -#define BL_CODES 19 -/* number of codes used to transfer the bit lengths */ - -#define HEAP_SIZE (2*L_CODES+1) -/* maximum heap size */ - -#define MAX_BITS 15 -/* All codes must not exceed MAX_BITS bits */ - -#define INIT_STATE 42 -#define BUSY_STATE 113 -#define FINISH_STATE 666 -/* Stream status */ - - -/* Data structure describing a single value and its code string. */ -typedef struct ct_data_s { - union { - ush freq; /* frequency count */ - ush code; /* bit string */ - } fc; - union { - ush dad; /* father node in Huffman tree */ - ush len; /* length of bit string */ - } dl; -} FAR ct_data; - -#define Freq fc.freq -#define Code fc.code -#define Dad dl.dad -#define Len dl.len - -typedef struct static_tree_desc_s static_tree_desc; - -typedef struct tree_desc_s { - ct_data *dyn_tree; /* the dynamic tree */ - int max_code; /* largest code with non zero frequency */ - static_tree_desc *stat_desc; /* the corresponding static tree */ -} FAR tree_desc; - -typedef ush Pos; -typedef Pos FAR Posf; -typedef unsigned IPos; - -/* A Pos is an index in the character window. We use short instead of int to - * save space in the various tables. IPos is used only for parameter passing. - */ - -typedef struct internal_state { - z_streamp strm; /* pointer back to this zlib stream */ - int status; /* as the name implies */ - Bytef *pending_buf; /* output still pending */ - Bytef *pending_out; /* next pending byte to output to the stream */ - int pending; /* nb of bytes in the pending buffer */ - int noheader; /* suppress zlib header and adler32 */ - Byte data_type; /* UNKNOWN, BINARY or ASCII */ - Byte method; /* STORED (for zip only) or DEFLATED */ - int last_flush; /* value of flush param for previous deflate call */ - - /* used by deflate.c: */ - - uInt w_size; /* LZ77 window size (32K by default) */ - uInt w_bits; /* log2(w_size) (8..16) */ - uInt w_mask; /* w_size - 1 */ - - Bytef *window; - /* Sliding window. Input bytes are read into the second half of the window, - * and move to the first half later to keep a dictionary of at least wSize - * bytes. With this organization, matches are limited to a distance of - * wSize-MAX_MATCH bytes, but this ensures that IO is always - * performed with a length multiple of the block size. Also, it limits - * the window size to 64K, which is quite useful on MSDOS. - * To do: use the user input buffer as sliding window. - */ - - ulg window_size; - /* Actual size of window: 2*wSize, except when the user input buffer - * is directly used as sliding window. - */ - - Posf *prev; - /* Link to older string with same hash index. To limit the size of this - * array to 64K, this link is maintained only for the last 32K strings. - * An index in this array is thus a window index modulo 32K. - */ - - Posf *head; /* Heads of the hash chains or NIL. */ - - uInt ins_h; /* hash index of string to be inserted */ - uInt hash_size; /* number of elements in hash table */ - uInt hash_bits; /* log2(hash_size) */ - uInt hash_mask; /* hash_size-1 */ - - uInt hash_shift; - /* Number of bits by which ins_h must be shifted at each input - * step. It must be such that after MIN_MATCH steps, the oldest - * byte no longer takes part in the hash key, that is: - * hash_shift * MIN_MATCH >= hash_bits - */ - - long block_start; - /* Window position at the beginning of the current output block. Gets - * negative when the window is moved backwards. - */ - - uInt match_length; /* length of best match */ - IPos prev_match; /* previous match */ - int match_available; /* set if previous match exists */ - uInt strstart; /* start of string to insert */ - uInt match_start; /* start of matching string */ - uInt lookahead; /* number of valid bytes ahead in window */ - - uInt prev_length; - /* Length of the best match at previous step. Matches not greater than this - * are discarded. This is used in the lazy match evaluation. - */ - - uInt max_chain_length; - /* To speed up deflation, hash chains are never searched beyond this - * length. A higher limit improves compression ratio but degrades the - * speed. - */ - - uInt max_lazy_match; - /* Attempt to find a better match only when the current match is strictly - * smaller than this value. This mechanism is used only for compression - * levels >= 4. - */ -# define max_insert_length max_lazy_match - /* Insert new strings in the hash table only if the match length is not - * greater than this length. This saves time but degrades compression. - * max_insert_length is used only for compression levels <= 3. - */ - - int level; /* compression level (1..9) */ - int strategy; /* favor or force Huffman coding*/ - - uInt good_match; - /* Use a faster search when the previous match is longer than this */ - - int nice_match; /* Stop searching when current match exceeds this */ - - /* used by trees.c: */ - /* Didn't use ct_data typedef below to supress compiler warning */ - struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ - struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ - struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ - - struct tree_desc_s l_desc; /* desc. for literal tree */ - struct tree_desc_s d_desc; /* desc. for distance tree */ - struct tree_desc_s bl_desc; /* desc. for bit length tree */ - - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ - int heap_len; /* number of elements in the heap */ - int heap_max; /* element of largest frequency */ - /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. - * The same heap array is used to build all trees. - */ - - uch depth[2*L_CODES+1]; - /* Depth of each subtree used as tie breaker for trees of equal frequency - */ - - uchf *l_buf; /* buffer for literals or lengths */ - - uInt lit_bufsize; - /* Size of match buffer for literals/lengths. There are 4 reasons for - * limiting lit_bufsize to 64K: - * - frequencies can be kept in 16 bit counters - * - if compression is not successful for the first block, all input - * data is still in the window so we can still emit a stored block even - * when input comes from standard input. (This can also be done for - * all blocks if lit_bufsize is not greater than 32K.) - * - if compression is not successful for a file smaller than 64K, we can - * even emit a stored file instead of a stored block (saving 5 bytes). - * This is applicable only for zip (not gzip or zlib). - * - creating new Huffman trees less frequently may not provide fast - * adaptation to changes in the input data statistics. (Take for - * example a binary file with poorly compressible code followed by - * a highly compressible string table.) Smaller buffer sizes give - * fast adaptation but have of course the overhead of transmitting - * trees more frequently. - * - I can't count above 4 - */ - - uInt last_lit; /* running index in l_buf */ - - ushf *d_buf; - /* Buffer for distances. To simplify the code, d_buf and l_buf have - * the same number of elements. To use different lengths, an extra flag - * array would be necessary. - */ - - ulg opt_len; /* bit length of current block with optimal trees */ - ulg static_len; /* bit length of current block with static trees */ - ulg compressed_len; /* total bit length of compressed file */ - uInt matches; /* number of string matches in current block */ - int last_eob_len; /* bit length of EOB code for last block */ - -#ifdef DEBUG - ulg bits_sent; /* bit length of the compressed data */ -#endif - - ush bi_buf; - /* Output buffer. bits are inserted starting at the bottom (least - * significant bits). - */ - int bi_valid; - /* Number of valid bits in bi_buf. All bits above the last valid bit - * are always zero. - */ - -} FAR deflate_state; - -/* Output a byte on the stream. - * IN assertion: there is enough room in pending_buf. - */ -#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} - - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) -/* In order to simplify the code, particularly on 16 bit machines, match - * distances are limited to MAX_DIST instead of WSIZE. - */ - - /* in trees.c */ -void _tr_init OF((deflate_state *s)); -int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); -ulg _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, - int eof)); -void _tr_align OF((deflate_state *s)); -void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, - int eof)); -#endif diff --git a/security/nss/cmd/zlib/example.c b/security/nss/cmd/zlib/example.c deleted file mode 100644 index 7c9176094..000000000 --- a/security/nss/cmd/zlib/example.c +++ /dev/null @@ -1,503 +0,0 @@ -/* example.c -- usage example of the zlib compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* $Id$ */ - -#include <stdio.h> -#include "zlib.h" - -#ifdef STDC -# include <string.h> -# include <stdlib.h> -#else - extern void exit OF((int)); -#endif - -#define CHECK_ERR(err, msg) { \ - if (err != Z_OK) { \ - fprintf(stderr, "%s error: %d\n", msg, err); \ - exit(1); \ - } \ -} - -const char hello[] = "hello, hello!"; -/* "hello world" would be more standard, but the repeated "hello" - * stresses the compression code better, sorry... - */ - -const char dictionary[] = "hello"; -uLong dictId; /* Adler32 value of the dictionary */ - -void test_compress OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_gzio OF((const char *out, const char *in, - Byte *uncompr, int uncomprLen)); -void test_deflate OF((Byte *compr, uLong comprLen)); -void test_inflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_large_deflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_large_inflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_flush OF((Byte *compr, uLong comprLen)); -void test_sync OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_dict_deflate OF((Byte *compr, uLong comprLen)); -void test_dict_inflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -int main OF((int argc, char *argv[])); - -/* =========================================================================== - * Test compress() and uncompress() - */ -void test_compress(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - uLong len = strlen(hello)+1; - - err = compress(compr, &comprLen, (const Bytef*)hello, len); - CHECK_ERR(err, "compress"); - - strcpy((char*)uncompr, "garbage"); - - err = uncompress(uncompr, &uncomprLen, compr, comprLen); - CHECK_ERR(err, "uncompress"); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad uncompress\n"); - } else { - printf("uncompress(): %s\n", uncompr); - } -} - -/* =========================================================================== - * Test read/write of .gz files - */ -void test_gzio(out, in, uncompr, uncomprLen) - const char *out; /* output file */ - const char *in; /* input file */ - Byte *uncompr; - int uncomprLen; -{ - int err; - int len = strlen(hello)+1; - gzFile file; - - file = gzopen(out, "wb"); - if (file == NULL) { - fprintf(stderr, "gzopen error\n"); - exit(1); - } - - if (gzwrite(file, (const voidp)hello, (unsigned)len) != len) { - fprintf(stderr, "gzwrite err: %s\n", gzerror(file, &err)); - } - gzclose(file); - - file = gzopen(in, "rb"); - if (file == NULL) { - fprintf(stderr, "gzopen error\n"); - } - strcpy((char*)uncompr, "garbage"); - - uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen); - if (uncomprLen != len) { - fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); - } - gzclose(file); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad gzread\n"); - } else { - printf("gzread(): %s\n", uncompr); - } -} - -/* =========================================================================== - * Test deflate() with small buffers - */ -void test_deflate(compr, comprLen) - Byte *compr; - uLong comprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - int len = strlen(hello)+1; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); - CHECK_ERR(err, "deflateInit"); - - c_stream.next_in = (Bytef*)hello; - c_stream.next_out = compr; - - while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) { - c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - } - /* Finish the stream, still forcing small buffers: */ - for (;;) { - c_stream.avail_out = 1; - err = deflate(&c_stream, Z_FINISH); - if (err == Z_STREAM_END) break; - CHECK_ERR(err, "deflate"); - } - - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflate() with small buffers - */ -void test_inflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - d_stream.next_in = compr; - d_stream.next_out = uncompr; - - while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { - d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ - err = inflate(&d_stream, Z_NO_FLUSH); - if (err == Z_STREAM_END) break; - CHECK_ERR(err, "inflate"); - } - - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad inflate\n"); - } else { - printf("inflate(): %s\n", uncompr); - } -} - -/* =========================================================================== - * Test deflate() with large buffers and dynamic change of compression level - */ -void test_large_deflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_BEST_SPEED); - CHECK_ERR(err, "deflateInit"); - - c_stream.next_out = compr; - c_stream.avail_out = (uInt)comprLen; - - /* At this point, uncompr is still mostly zeroes, so it should compress - * very well: - */ - c_stream.next_in = uncompr; - c_stream.avail_in = (uInt)uncomprLen; - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - if (c_stream.avail_in != 0) { - fprintf(stderr, "deflate not greedy\n"); - } - - /* Feed in already compressed data and switch to no compression: */ - deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); - c_stream.next_in = compr; - c_stream.avail_in = (uInt)comprLen/2; - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - - /* Switch back to compressing mode: */ - deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); - c_stream.next_in = uncompr; - c_stream.avail_in = (uInt)uncomprLen; - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - - err = deflate(&c_stream, Z_FINISH); - if (err != Z_STREAM_END) { - fprintf(stderr, "deflate should report Z_STREAM_END\n"); - } - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflate() with large buffers - */ -void test_large_inflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - d_stream.next_in = compr; - d_stream.avail_in = (uInt)comprLen; - - for (;;) { - d_stream.next_out = uncompr; /* discard the output */ - d_stream.avail_out = (uInt)uncomprLen; - err = inflate(&d_stream, Z_NO_FLUSH); - if (err == Z_STREAM_END) break; - CHECK_ERR(err, "large inflate"); - } - - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - if (d_stream.total_out != 2*uncomprLen + comprLen/2) { - fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); - } else { - printf("large_inflate(): OK\n"); - } -} - -/* =========================================================================== - * Test deflate() with full flush - */ -void test_flush(compr, comprLen) - Byte *compr; - uLong comprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - int len = strlen(hello)+1; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); - CHECK_ERR(err, "deflateInit"); - - c_stream.next_in = (Bytef*)hello; - c_stream.next_out = compr; - c_stream.avail_in = 3; - c_stream.avail_out = (uInt)comprLen; - err = deflate(&c_stream, Z_FULL_FLUSH); - CHECK_ERR(err, "deflate"); - - compr[3]++; /* force an error in first compressed block */ - c_stream.avail_in = len - 3; - - err = deflate(&c_stream, Z_FINISH); - if (err != Z_STREAM_END) { - CHECK_ERR(err, "deflate"); - } - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflateSync() - */ -void test_sync(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - d_stream.next_in = compr; - d_stream.next_out = uncompr; - d_stream.avail_in = 2; /* just read the zlib header */ - d_stream.avail_out = (uInt)uncomprLen; - - inflate(&d_stream, Z_NO_FLUSH); - CHECK_ERR(err, "inflate"); - - d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ - err = inflateSync(&d_stream); /* but skip the damaged part */ - CHECK_ERR(err, "inflateSync"); - - err = inflate(&d_stream, Z_FINISH); - if (err != Z_DATA_ERROR) { - fprintf(stderr, "inflate should report DATA_ERROR\n"); - /* Because of incorrect adler32 */ - } - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - printf("after inflateSync(): hel%s\n", uncompr); -} - -/* =========================================================================== - * Test deflate() with preset dictionary - */ -void test_dict_deflate(compr, comprLen) - Byte *compr; - uLong comprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_BEST_COMPRESSION); - CHECK_ERR(err, "deflateInit"); - - err = deflateSetDictionary(&c_stream, - (const Bytef*)dictionary, sizeof(dictionary)); - CHECK_ERR(err, "deflateSetDictionary"); - - dictId = c_stream.adler; - c_stream.next_out = compr; - c_stream.avail_out = (uInt)comprLen; - - c_stream.next_in = (Bytef*)hello; - c_stream.avail_in = (uInt)strlen(hello)+1; - - err = deflate(&c_stream, Z_FINISH); - if (err != Z_STREAM_END) { - fprintf(stderr, "deflate should report Z_STREAM_END\n"); - } - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflate() with a preset dictionary - */ -void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - d_stream.next_in = compr; - d_stream.avail_in = (uInt)comprLen; - - d_stream.next_out = uncompr; - d_stream.avail_out = (uInt)uncomprLen; - - for (;;) { - err = inflate(&d_stream, Z_NO_FLUSH); - if (err == Z_STREAM_END) break; - if (err == Z_NEED_DICT) { - if (d_stream.adler != dictId) { - fprintf(stderr, "unexpected dictionary"); - exit(1); - } - err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, - sizeof(dictionary)); - } - CHECK_ERR(err, "inflate with dict"); - } - - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad inflate with dict\n"); - } else { - printf("inflate with dictionary: %s\n", uncompr); - } -} - -/* =========================================================================== - * Usage: example [output.gz [input.gz]] - */ - -int main(argc, argv) - int argc; - char *argv[]; -{ - Byte *compr, *uncompr; - uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ - uLong uncomprLen = comprLen; - - if (zlibVersion()[0] != ZLIB_VERSION[0]) { - fprintf(stderr, "incompatible zlib version\n"); - exit(1); - - } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { - fprintf(stderr, "warning: different zlib version\n"); - } - - compr = (Byte*)calloc((uInt)comprLen, 1); - uncompr = (Byte*)calloc((uInt)uncomprLen, 1); - /* compr and uncompr are cleared to avoid reading uninitialized - * data and to ensure that uncompr compresses well. - */ - if (compr == Z_NULL || uncompr == Z_NULL) { - printf("out of memory\n"); - exit(1); - } - - test_compress(compr, comprLen, uncompr, uncomprLen); - - test_gzio((argc > 1 ? argv[1] : "foo.gz"), - (argc > 2 ? argv[2] : "foo.gz"), - uncompr, (int)uncomprLen); - - test_deflate(compr, comprLen); - test_inflate(compr, comprLen, uncompr, uncomprLen); - - test_large_deflate(compr, comprLen, uncompr, uncomprLen); - test_large_inflate(compr, comprLen, uncompr, uncomprLen); - - test_flush(compr, comprLen); - test_sync(compr, comprLen, uncompr, uncomprLen); - - test_dict_deflate(compr, comprLen); - test_dict_inflate(compr, comprLen, uncompr, uncomprLen); - - exit(0); - return 0; /* to avoid warning */ -} diff --git a/security/nss/cmd/zlib/gzio.c b/security/nss/cmd/zlib/gzio.c deleted file mode 100644 index c52d30d30..000000000 --- a/security/nss/cmd/zlib/gzio.c +++ /dev/null @@ -1,537 +0,0 @@ -/* gzio.c -- IO on .gz files - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ - -/* $Id$ */ - -#include <stdio.h> - -#include "zutil.h" - -struct internal_state {int dummy;}; /* for buggy compilers */ - -#define Z_BUFSIZE 4096 - -#define ALLOC(size) malloc(size) -#define TRYFREE(p) {if (p) free(p);} - -static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define RESERVED 0xE0 /* bits 5..7: reserved */ - -typedef struct gz_stream { - z_stream stream; - int z_err; /* error code for last stream operation */ - int z_eof; /* set if end of input file */ - FILE *file; /* .gz file */ - Byte *inbuf; /* input buffer */ - Byte *outbuf; /* output buffer */ - uLong crc; /* crc32 of uncompressed data */ - char *msg; /* error message */ - char *path; /* path name for debugging only */ - int transparent; /* 1 if input file is not a .gz file */ - char mode; /* 'w' or 'r' */ -} gz_stream; - - -local gzFile gz_open OF((const char *path, const char *mode, int fd)); -local int get_byte OF((gz_stream *s)); -local void check_header OF((gz_stream *s)); -local int destroy OF((gz_stream *s)); -local void putLong OF((FILE *file, uLong x)); -local uLong getLong OF((gz_stream *s)); - -/* =========================================================================== - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb"). The file is given either by file descriptor - or path name (if fd == -1). - gz_open return NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). -*/ -local gzFile gz_open (path, mode, fd) - const char *path; - const char *mode; - int fd; -{ - int err; - int level = Z_DEFAULT_COMPRESSION; /* compression level */ - char *p = (char*)mode; - gz_stream *s; - char fmode[80]; /* copy of mode, without the compression level */ - char *m = fmode; - - if (!path || !mode) return Z_NULL; - - s = (gz_stream *)ALLOC(sizeof(gz_stream)); - if (!s) return Z_NULL; - - s->stream.zalloc = (alloc_func)0; - s->stream.zfree = (free_func)0; - s->stream.opaque = (voidpf)0; - s->stream.next_in = s->inbuf = Z_NULL; - s->stream.next_out = s->outbuf = Z_NULL; - s->stream.avail_in = s->stream.avail_out = 0; - s->file = NULL; - s->z_err = Z_OK; - s->z_eof = 0; - s->crc = crc32(0L, Z_NULL, 0); - s->msg = NULL; - s->transparent = 0; - - s->path = (char*)ALLOC(strlen(path)+1); - if (s->path == NULL) { - return destroy(s), (gzFile)Z_NULL; - } - strcpy(s->path, path); /* do this early for debugging */ - - s->mode = '\0'; - do { - if (*p == 'r') s->mode = 'r'; - if (*p == 'w' || *p == 'a') s->mode = 'w'; - if (*p >= '0' && *p <= '9') { - level = *p - '0'; - } else { - *m++ = *p; /* copy the mode */ - } - } while (*p++ && m != fmode + sizeof(fmode)); - if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL; - - if (s->mode == 'w') { - err = deflateInit2(&(s->stream), level, - Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0); - /* windowBits is passed < 0 to suppress zlib header */ - - s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); - - if (err != Z_OK || s->outbuf == Z_NULL) { - return destroy(s), (gzFile)Z_NULL; - } - } else { - err = inflateInit2(&(s->stream), -MAX_WBITS); - s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); - - if (err != Z_OK || s->inbuf == Z_NULL) { - return destroy(s), (gzFile)Z_NULL; - } - } - s->stream.avail_out = Z_BUFSIZE; - - errno = 0; - s->file = fd < 0 ? FOPEN(path, fmode) : (FILE*)fdopen(fd, fmode); - - if (s->file == NULL) { - return destroy(s), (gzFile)Z_NULL; - } - if (s->mode == 'w') { - /* Write a very simple .gz header: - */ - fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1], - Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE); - } else { - check_header(s); /* skip the .gz header */ - } - return (gzFile)s; -} - -/* =========================================================================== - Opens a gzip (.gz) file for reading or writing. -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern gzFile) gzopen (const char *path, const char *mode) -#else -extern gzFile EXPORT gzopen OF((const char *path, const char *mode)) -#endif -{ - return gz_open (path, mode, -1); -} - -/* =========================================================================== - Associate a gzFile with the file descriptor fd. fd is not dup'ed here - to mimic the behavio(u)r of fdopen. -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern gzFile) gzdopen (int fd, const char *mode) -#else -extern gzFile EXPORT gzdopen OF((int fd, const char *mode)) -#endif -{ - char name[20]; - - if (fd < 0) return (gzFile)Z_NULL; - sprintf(name, "<fd:%d>", fd); /* for debugging */ - - return gz_open (name, mode, fd); -} - -/* =========================================================================== - Read a byte from a gz_stream; update next_in and avail_in. Return EOF - for end of file. - IN assertion: the stream s has been sucessfully opened for reading. -*/ -local int get_byte(s) - gz_stream *s; -{ - if (s->z_eof) return EOF; - if (s->stream.avail_in == 0) { - errno = 0; - s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); - if (s->stream.avail_in == 0) { - s->z_eof = 1; - if (ferror(s->file)) s->z_err = Z_ERRNO; - return EOF; - } - s->stream.next_in = s->inbuf; - } - s->stream.avail_in--; - return *(s->stream.next_in)++; -} - -/* =========================================================================== - Check the gzip header of a gz_stream opened for reading. Set the stream - mode to transparent if the gzip magic header is not present; set s->err - to Z_DATA_ERROR if the magic header is present but the rest of the header - is incorrect. - IN assertion: the stream s has already been created sucessfully; - s->stream.avail_in is zero for the first time, but may be non-zero - for concatenated .gz files. -*/ -local void check_header(s) - gz_stream *s; -{ - int method; /* method byte */ - int flags; /* flags byte */ - uInt len; - int c; - - /* Check the gzip magic header */ - for (len = 0; len < 2; len++) { - c = get_byte(s); - if (c != gz_magic[len]) { - s->transparent = 1; - if (c != EOF) s->stream.avail_in++, s->stream.next_in--; - s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END; - return; - } - } - method = get_byte(s); - flags = get_byte(s); - if (method != Z_DEFLATED || (flags & RESERVED) != 0) { - s->z_err = Z_DATA_ERROR; - return; - } - - /* Discard time, xflags and OS code: */ - for (len = 0; len < 6; len++) (void)get_byte(s); - - if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */ - len = (uInt)get_byte(s); - len += ((uInt)get_byte(s))<<8; - /* len is garbage if EOF but the loop below will quit anyway */ - while (len-- != 0 && get_byte(s) != EOF) ; - } - if ((flags & ORIG_NAME) != 0) { /* skip the original file name */ - while ((c = get_byte(s)) != 0 && c != EOF) ; - } - if ((flags & COMMENT) != 0) { /* skip the .gz file comment */ - while ((c = get_byte(s)) != 0 && c != EOF) ; - } - if ((flags & HEAD_CRC) != 0) { /* skip the header crc */ - for (len = 0; len < 2; len++) (void)get_byte(s); - } - s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK; -} - - /* =========================================================================== - * Cleanup then free the given gz_stream. Return a zlib error code. - Try freeing in the reverse order of allocations. - */ -local int destroy (s) - gz_stream *s; -{ - int err = Z_OK; - - if (!s) return Z_STREAM_ERROR; - - TRYFREE(s->msg); - - if (s->stream.state != NULL) { - if (s->mode == 'w') { - err = deflateEnd(&(s->stream)); - } else if (s->mode == 'r') { - err = inflateEnd(&(s->stream)); - } - } - if (s->file != NULL && fclose(s->file)) { - err = Z_ERRNO; - } - if (s->z_err < 0) err = s->z_err; - - TRYFREE(s->inbuf); - TRYFREE(s->outbuf); - TRYFREE(s->path); - TRYFREE(s); - return err; -} - -/* =========================================================================== - Reads the given number of uncompressed bytes from the compressed file. - gzread returns the number of bytes actually read (0 for end of file). -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzread (gzFile file, voidp buf, unsigned len) -#else -extern int EXPORT gzread OF((gzFile file, voidp buf, unsigned len)) -#endif -{ - gz_stream *s = (gz_stream*)file; - Bytef *start = buf; /* starting point for crc computation */ - Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */ - - if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR; - - if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1; - if (s->z_err == Z_STREAM_END) return 0; /* EOF */ - - s->stream.next_out = next_out = buf; - s->stream.avail_out = len; - - while (s->stream.avail_out != 0) { - - if (s->transparent) { - /* Copy first the lookahead bytes: */ - uInt n = s->stream.avail_in; - if (n > s->stream.avail_out) n = s->stream.avail_out; - if (n > 0) { - zmemcpy(s->stream.next_out, s->stream.next_in, n); - next_out += n; - s->stream.next_out = next_out; - s->stream.next_in += n; - s->stream.avail_out -= n; - s->stream.avail_in -= n; - } - if (s->stream.avail_out > 0) { - s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out, - s->file); - } - return (int)(len - s->stream.avail_out); - } - if (s->stream.avail_in == 0 && !s->z_eof) { - - errno = 0; - s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); - if (s->stream.avail_in == 0) { - s->z_eof = 1; - if (ferror(s->file)) { - s->z_err = Z_ERRNO; - break; - } - } - s->stream.next_in = s->inbuf; - } - s->z_err = inflate(&(s->stream), Z_NO_FLUSH); - - if (s->z_err == Z_STREAM_END) { - /* Check CRC and original size */ - s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); - start = s->stream.next_out; - - if (getLong(s) != s->crc || getLong(s) != s->stream.total_out) { - s->z_err = Z_DATA_ERROR; - } else { - /* Check for concatenated .gz files: */ - check_header(s); - if (s->z_err == Z_OK) { - inflateReset(&(s->stream)); - s->crc = crc32(0L, Z_NULL, 0); - } - } - } - if (s->z_err != Z_OK || s->z_eof) break; - } - s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); - - return (int)(len - s->stream.avail_out); -} - -/* =========================================================================== - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of bytes actually written (0 in case of error). -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzwrite (gzFile file, const voidp buf, unsigned len) -#else -extern int EXPORT gzwrite OF((gzFile file, const voidp buf, unsigned len)) -#endif -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; - - s->stream.next_in = buf; - s->stream.avail_in = len; - - while (s->stream.avail_in != 0) { - - if (s->stream.avail_out == 0) { - - s->stream.next_out = s->outbuf; - if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { - s->z_err = Z_ERRNO; - break; - } - s->stream.avail_out = Z_BUFSIZE; - } - s->z_err = deflate(&(s->stream), Z_NO_FLUSH); - if (s->z_err != Z_OK) break; - } - s->crc = crc32(s->crc, buf, len); - - return (int)(len - s->stream.avail_in); -} - -/* =========================================================================== - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. - gzflush should be called only when strictly necessary because it can - degrade compression. -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzflush (gzFile file, int flush) -#else -extern int EXPORT gzflush OF((gzFile file, int flush)) -#endif -{ - uInt len; - int done = 0; - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; - - s->stream.avail_in = 0; /* should be zero already anyway */ - - for (;;) { - len = Z_BUFSIZE - s->stream.avail_out; - - if (len != 0) { - if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) { - s->z_err = Z_ERRNO; - return Z_ERRNO; - } - s->stream.next_out = s->outbuf; - s->stream.avail_out = Z_BUFSIZE; - } - if (done) break; - s->z_err = deflate(&(s->stream), flush); - - /* deflate has finished flushing only when it hasn't used up - * all the available space in the output buffer: - */ - done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END); - - if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break; - } - fflush(s->file); - return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; -} - -/* =========================================================================== - Outputs a long in LSB order to the given file -*/ -local void putLong (file, x) - FILE *file; - uLong x; -{ - int n; - for (n = 0; n < 4; n++) { - fputc((int)(x & 0xff), file); - x >>= 8; - } -} - -/* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets -*/ -local uLong getLong (s) - gz_stream *s; -{ - uLong x = (uLong)get_byte(s); - int c; - - x += ((uLong)get_byte(s))<<8; - x += ((uLong)get_byte(s))<<16; - c = get_byte(s); - if (c == EOF) s->z_err = Z_DATA_ERROR; - x += ((uLong)c)<<24; - return x; -} - -/* =========================================================================== - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzclose (gzFile file) -#else -extern int EXPORT gzclose OF((gzFile file)) -#endif -{ - int err; - gz_stream *s = (gz_stream*)file; - - if (s == NULL) return Z_STREAM_ERROR; - - if (s->mode == 'w') { - err = gzflush (file, Z_FINISH); - if (err != Z_OK) return destroy(file); - - putLong (s->file, s->crc); - putLong (s->file, s->stream.total_in); - - } - return destroy(file); -} - -/* =========================================================================== - Returns the error message for the last error which occured on the - given compressed file. errnum is set to zlib error number. If an - error occured in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern const char *) gzerror (gzFile file, int *errnum) -#else -extern const char * EXPORT gzerror OF((gzFile file, int *errnum)) -#endif -{ - char *m; - gz_stream *s = (gz_stream*)file; - - if (s == NULL) { - *errnum = Z_STREAM_ERROR; - return (const char*)ERR_MSG(Z_STREAM_ERROR); - } - *errnum = s->z_err; - if (*errnum == Z_OK) return (const char*)""; - - m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg); - - if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err); - - TRYFREE(s->msg); - s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3); - strcpy(s->msg, s->path); - strcat(s->msg, ": "); - strcat(s->msg, m); - return (const char*)s->msg; -} diff --git a/security/nss/cmd/zlib/infblock.c b/security/nss/cmd/zlib/infblock.c deleted file mode 100644 index 8eddbafed..000000000 --- a/security/nss/cmd/zlib/infblock.c +++ /dev/null @@ -1,406 +0,0 @@ -/* infblock.c -- interpret and process block types to last block - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ - -#include "zutil.h" -#include "infblock.h" -#include "inftrees.h" -#include "infcodes.h" -#include "infutil.h" - -struct inflate_codes_state {int dummy;}; /* for buggy compilers */ - -/* Table for deflate from PKZIP's appnote.txt. */ -local uInt border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarily, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ - - -void inflate_blocks_reset(s, z, c) -inflate_blocks_statef *s; -z_streamp z; -uLongf *c; -{ - if (s->checkfn != Z_NULL) - *c = s->check; - if (s->mode == BTREE || s->mode == DTREE) - ZFREE(z, s->sub.trees.blens); - if (s->mode == CODES) - { - inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - } - s->mode = TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0); - Trace((stderr, "inflate: blocks reset\n")); -} - - -inflate_blocks_statef *inflate_blocks_new(z, c, w) -z_streamp z; -check_func c; -uInt w; -{ - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = TYPE; - Trace((stderr, "inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, &s->check); - return s; -} - - -#ifdef DEBUG - extern uInt inflate_hufts; -#endif -int inflate_blocks(s, z, r) -inflate_blocks_statef *s; -z_streamp z; -int r; -{ - uInt t; /* temporary storage */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input based on current state */ - while (1) switch (s->mode) - { - case TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: /* stored */ - Trace((stderr, "inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; /* go to byte boundary */ - DUMPBITS(t) - s->mode = LENS; /* get length of stored block */ - break; - case 1: /* fixed */ - Trace((stderr, "inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - inflate_huft *tl, *td; - - inflate_trees_fixed(&bl, &bd, &tl, &td); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.tl = Z_NULL; /* don't try to free these */ - s->sub.decode.td = Z_NULL; - } - DUMPBITS(3) - s->mode = CODES; - break; - case 2: /* dynamic */ - Trace((stderr, "inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = TABLE; - break; - case 3: /* illegal */ - DUMPBITS(3) - s->mode = BAD; - z->msg = (char*)"invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case LENS: - NEEDBITS(32) - if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) - { - s->mode = BAD; - z->msg = (char*)"invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; /* dump bits */ - Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); - break; - case STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - zmemcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev((stderr, "inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? DRY : TYPE; - break; - case TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; -#ifndef PKZIP_BUG_WORKAROUND - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = BAD; - z->msg = (char*)"too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } -#endif - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if (t < 19) - t = 19; - if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev((stderr, "inflate: table sizes ok\n")); - s->mode = BTREE; - case BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, z); - if (t != Z_OK) - { - ZFREE(z, s->sub.trees.blens); - r = t; - if (r == Z_DATA_ERROR) - s->mode = BAD; - LEAVE - } - s->sub.trees.index = 0; - Tracev((stderr, "inflate: bits tree ok\n")); - s->mode = DTREE; - case DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->word.what.Bits; - c = h->more.Base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else /* c == 16..18 */ - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - inflate_trees_free(s->sub.trees.tb, z); - ZFREE(z, s->sub.trees.blens); - s->mode = BAD; - z->msg = (char*)"invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - inflate_trees_free(s->sub.trees.tb, z); - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - bl = 9; /* must be <= 9 for lookahead assumptions */ - bd = 6; /* must be <= 9 for lookahead assumptions */ - t = s->sub.trees.table; -#ifdef DEBUG - inflate_hufts = 0; -#endif - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, z); - ZFREE(z, s->sub.trees.blens); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - s->mode = BAD; - r = t; - LEAVE - } - Tracev((stderr, "inflate: trees ok, %d * %d bytes used\n", - inflate_hufts, sizeof(inflate_huft))); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - inflate_trees_free(td, z); - inflate_trees_free(tl, z); - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.codes = c; - s->sub.decode.tl = tl; - s->sub.decode.td = td; - } - s->mode = CODES; - case CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - LOAD - Tracev((stderr, "inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = TYPE; - break; - } - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } - s->mode = DRY; - case DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = DONE; - case DONE: - r = Z_STREAM_END; - LEAVE - case BAD: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -int inflate_blocks_free(s, z, c) -inflate_blocks_statef *s; -z_streamp z; -uLongf *c; -{ - inflate_blocks_reset(s, z, c); - ZFREE(z, s->window); - ZFREE(z, s); - Trace((stderr, "inflate: blocks freed\n")); - return Z_OK; -} - - -void inflate_set_dictionary(s, d, n) -inflate_blocks_statef *s; -const Bytef *d; -uInt n; -{ - zmemcpy((charf *)s->window, d, n); - s->read = s->write = s->window + n; -} diff --git a/security/nss/cmd/zlib/infblock.h b/security/nss/cmd/zlib/infblock.h deleted file mode 100644 index 3ecd50cd3..000000000 --- a/security/nss/cmd/zlib/infblock.h +++ /dev/null @@ -1,37 +0,0 @@ -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_blocks_state; -typedef struct inflate_blocks_state FAR inflate_blocks_statef; - -extern inflate_blocks_statef * inflate_blocks_new OF(( - z_streamp z, - check_func c, /* check function */ - uInt w)); /* window size */ - -extern int inflate_blocks OF(( - inflate_blocks_statef *, - z_streamp , - int)); /* initial return code */ - -extern void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_streamp , - uLongf *)); /* check value on output */ - -extern int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_streamp , - uLongf *)); /* check value on output */ - -extern void inflate_set_dictionary OF(( - inflate_blocks_statef *s, - const Bytef *d, /* dictionary */ - uInt n)); /* dictionary length */ diff --git a/security/nss/cmd/zlib/infcodes.c b/security/nss/cmd/zlib/infcodes.c deleted file mode 100644 index 3ae3818a1..000000000 --- a/security/nss/cmd/zlib/infcodes.c +++ /dev/null @@ -1,247 +0,0 @@ -/* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" -#include "infblock.h" -#include "infcodes.h" -#include "infutil.h" -#include "inffast.h" - -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - START, /* x: set up for LEN */ - LEN, /* i: get length/literal/eob next */ - LENEXT, /* i: getting length extra (have base) */ - DIST, /* i: get distance next */ - DISTEXT, /* i: getting distance extra */ - COPY, /* o: copying bytes in window, waiting for space */ - LIT, /* o: got literal, waiting for output space */ - WASH, /* o: got eob, possibly still output waiting */ - END, /* x: got eob and all data flushed */ - BADCODE} /* x: got error */ - mode; /* current inflate_codes mode */ - - /* mode dependent information */ - uInt len; - union { - struct { - inflate_huft *tree; /* pointer into tree */ - uInt need; /* bits needed */ - } code; /* if LEN or DIST, where in tree */ - uInt lit; /* if LIT, literal */ - struct { - uInt get; /* bits to get for extra */ - uInt dist; /* distance back to copy from */ - } copy; /* if EXT or COPY, where and how much */ - } sub; /* submode */ - - /* mode independent information */ - Byte lbits; /* ltree bits decoded per branch */ - Byte dbits; /* dtree bits decoder per branch */ - inflate_huft *ltree; /* literal/length/eob tree */ - inflate_huft *dtree; /* distance tree */ - -}; - - -inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) -uInt bl, bd; -inflate_huft *tl; -inflate_huft *td; /* need separate declaration for Borland C++ */ -z_streamp z; -{ - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev((stderr, "inflate: codes new\n")); - } - return c; -} - - -int inflate_codes(s, z, r) -inflate_blocks_statef *s; -z_streamp z; -int r; -{ - uInt j; /* temporary storage */ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - Bytef *f; /* pointer to copy strings from */ - inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input and output based on current state */ - while (1) switch (c->mode) - { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - case START: /* x: set up for LEN */ -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif /* !SLOW */ - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: /* i: get length/literal/eob next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) /* literal */ - { - c->sub.lit = t->base; - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) /* length */ - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t->next; - break; - } - if (e & 32) /* end of block */ - { - Tracevv((stderr, "inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: /* i: getting length extra (have base) */ - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv((stderr, "inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: /* i: get distance next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) /* distance */ - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t->next; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: /* i: getting distance extra */ - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: /* o: copying bytes in window, waiting for space */ -#ifndef __TURBOC__ /* Turbo C bug for following expression */ - f = (uInt)(q - s->window) < c->sub.copy.dist ? - s->end - (c->sub.copy.dist - (q - s->window)) : - q - c->sub.copy.dist; -#else - f = q - c->sub.copy.dist; - if ((uInt)(q - s->window) < c->sub.copy.dist) - f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); -#endif - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: /* o: got literal, waiting for output space */ - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: /* o: got eob, possibly more output */ - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: /* x: got error */ - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -void inflate_codes_free(c, z) -inflate_codes_statef *c; -z_streamp z; -{ - ZFREE(z, c); - Tracev((stderr, "inflate: codes free\n")); -} diff --git a/security/nss/cmd/zlib/infcodes.h b/security/nss/cmd/zlib/infcodes.h deleted file mode 100644 index c2c38df2c..000000000 --- a/security/nss/cmd/zlib/infcodes.h +++ /dev/null @@ -1,27 +0,0 @@ -/* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_codes_state; -typedef struct inflate_codes_state FAR inflate_codes_statef; - -extern inflate_codes_statef *inflate_codes_new OF(( - uInt, uInt, - inflate_huft *, inflate_huft *, - z_streamp )); - -extern int inflate_codes OF(( - inflate_blocks_statef *, - z_streamp , - int)); - -extern void inflate_codes_free OF(( - inflate_codes_statef *, - z_streamp )); - diff --git a/security/nss/cmd/zlib/inffast.c b/security/nss/cmd/zlib/inffast.c deleted file mode 100644 index 86eee4a29..000000000 --- a/security/nss/cmd/zlib/inffast.c +++ /dev/null @@ -1,168 +0,0 @@ -/* inffast.c -- process literals and length/distance pairs fast - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" -#include "infblock.h" -#include "infcodes.h" -#include "infutil.h" -#include "inffast.h" - -struct inflate_codes_state {int dummy;}; /* for buggy compilers */ - -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - -/* macros for bit input with no checking and for returning unused bytes */ -#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} -#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;} - -/* Called with number of bytes left to write in window at least 258 - (the maximum string length) and number of input bytes available - at least ten. The ten bytes are six bytes for the longest length/ - distance pair plus four bytes for overloading the bit buffer. */ - -int inflate_fast(bl, bd, tl, td, s, z) -uInt bl, bd; -inflate_huft *tl; -inflate_huft *td; /* need separate declaration for Borland C++ */ -inflate_blocks_statef *s; -z_streamp z; -{ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - uInt ml; /* mask for literal/length tree */ - uInt md; /* mask for distance tree */ - uInt c; /* bytes to copy */ - uInt d; /* distance back to copy from */ - Bytef *r; /* copy source pointer */ - - /* load input, output, bit values */ - LOAD - - /* initialize masks */ - ml = inflate_mask[bl]; - md = inflate_mask[bd]; - - /* do until not enough input or output space for fast loop */ - do { /* assume called with m >= 258 && n >= 10 */ - /* get literal/length code */ - GRABBITS(20) /* max bits for literal/length code */ - if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - continue; - } - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits for length */ - e &= 15; - c = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * length %u\n", c)); - - /* decode distance base of block to copy */ - GRABBITS(15); /* max bits for distance code */ - e = (t = td + ((uInt)b & md))->exop; - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits to add to distance base */ - e &= 15; - GRABBITS(e) /* get extra bits (up to 13) */ - d = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * distance %u\n", d)); - - /* do the copy */ - m -= c; - if ((uInt)(q - s->window) >= d) /* offset before dest */ - { /* just copy */ - r = q - d; - *q++ = *r++; c--; /* minimum count is three, */ - *q++ = *r++; c--; /* so unroll loop a little */ - } - else /* else offset after destination */ - { - e = d - (uInt)(q - s->window); /* bytes from offset to end */ - r = s->end - e; /* pointer to offset */ - if (c > e) /* if source crosses, */ - { - c -= e; /* copy to end of window */ - do { - *q++ = *r++; - } while (--e); - r = s->window; /* copy rest from start of window */ - } - } - do { /* copy all or what's left */ - *q++ = *r++; - } while (--c); - break; - } - else if ((e & 64) == 0) - e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; - else - { - z->msg = (char*)"invalid distance code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - break; - } - if ((e & 64) == 0) - { - if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - break; - } - } - else if (e & 32) - { - Tracevv((stderr, "inflate: * end of block\n")); - UNGRAB - UPDATE - return Z_STREAM_END; - } - else - { - z->msg = (char*)"invalid literal/length code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - } while (m >= 258 && n >= 10); - - /* not enough input or output--restore pointers and return */ - UNGRAB - UPDATE - return Z_OK; -} diff --git a/security/nss/cmd/zlib/inffast.h b/security/nss/cmd/zlib/inffast.h deleted file mode 100644 index 8cc644efb..000000000 --- a/security/nss/cmd/zlib/inffast.h +++ /dev/null @@ -1,17 +0,0 @@ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -extern int inflate_fast OF(( - uInt, - uInt, - inflate_huft *, - inflate_huft *, - inflate_blocks_statef *, - z_streamp )); diff --git a/security/nss/cmd/zlib/inflate.c b/security/nss/cmd/zlib/inflate.c deleted file mode 100644 index 8cd0c141c..000000000 --- a/security/nss/cmd/zlib/inflate.c +++ /dev/null @@ -1,346 +0,0 @@ -/* inflate.c -- zlib interface to inflate modules - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ - -#include "zutil.h" -#include "infblock.h" - -struct inflate_blocks_state {int dummy;}; /* for buggy compilers */ - -/* inflate private state */ -struct internal_state { - - /* mode */ - enum { - METHOD, /* waiting for method byte */ - FLAG, /* waiting for flag byte */ - DICT4, /* four dictionary check bytes to go */ - DICT3, /* three dictionary check bytes to go */ - DICT2, /* two dictionary check bytes to go */ - DICT1, /* one dictionary check byte to go */ - DICT0, /* waiting for inflateSetDictionary */ - BLOCKS, /* decompressing blocks */ - CHECK4, /* four check bytes to go */ - CHECK3, /* three check bytes to go */ - CHECK2, /* two check bytes to go */ - CHECK1, /* one check byte to go */ - DONE, /* finished check, done */ - BAD} /* got an error--stay here */ - mode; /* current inflate mode */ - - /* mode dependent information */ - union { - uInt method; /* if FLAGS, method byte */ - struct { - uLong was; /* computed check value */ - uLong need; /* stream check value */ - } check; /* if CHECK, check values to compare */ - uInt marker; /* if BAD, inflateSync's marker bytes count */ - } sub; /* submode */ - - /* mode independent information */ - int nowrap; /* flag for no wrapper */ - uInt wbits; /* log2(window size) (8..15, defaults to 15) */ - inflate_blocks_statef - *blocks; /* current inflate_blocks state */ - -}; - - -PR_PUBLIC_API(int) inflateReset(z) -z_streamp z; -{ - uLong c; - - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - z->total_in = z->total_out = 0; - z->msg = Z_NULL; - z->state->mode = z->state->nowrap ? BLOCKS : METHOD; - inflate_blocks_reset(z->state->blocks, z, &c); - Trace((stderr, "inflate: reset\n")); - return Z_OK; -} - - -PR_PUBLIC_API(int) inflateEnd(z) -z_streamp z; -{ - uLong c; - - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z, &c); - ZFREE(z, z->state); - z->state = Z_NULL; - Trace((stderr, "inflate: end\n")); - return Z_OK; -} - - -PR_PUBLIC_API(int) inflateInit2_(z, w, version, stream_size) -z_streamp z; -int w; -const char *version; -int stream_size; -{ - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != sizeof(z_stream)) - return Z_VERSION_ERROR; - - /* initialize state */ - if (z == Z_NULL) - return Z_STREAM_ERROR; - z->msg = Z_NULL; - if (z->zalloc == Z_NULL) - { - z->zalloc = zcalloc; - z->opaque = (voidpf)0; - } - if (z->zfree == Z_NULL) z->zfree = zcfree; - if ((z->state = (struct internal_state FAR *) - ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) - return Z_MEM_ERROR; - z->state->blocks = Z_NULL; - - /* handle undocumented nowrap option (no zlib header or check) */ - z->state->nowrap = 0; - if (w < 0) - { - w = - w; - z->state->nowrap = 1; - } - - /* set window size */ - if (w < 8 || w > 15) - { - inflateEnd(z); - return Z_STREAM_ERROR; - } - z->state->wbits = (uInt)w; - - /* create inflate_blocks state */ - if ((z->state->blocks = - inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) - == Z_NULL) - { - inflateEnd(z); - return Z_MEM_ERROR; - } - Trace((stderr, "inflate: allocated\n")); - - /* reset state */ - inflateReset(z); - return Z_OK; -} - - -PR_PUBLIC_API(int) inflateInit_(z, version, stream_size) -z_streamp z; -const char *version; -int stream_size; -{ - return inflateInit2_(z, DEF_WBITS, version, stream_size); -} - - -#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;} -#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) - -PR_PUBLIC_API(int) inflate(z, f) -z_streamp z; -int f; -{ - int r; - uInt b; - - if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0) - return Z_STREAM_ERROR; - r = Z_BUF_ERROR; - while (1) switch (z->state->mode) - { - case METHOD: - NEEDBYTE - if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED) - { - z->state->mode = BAD; - z->msg = (char*)"unknown compression method"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if ((z->state->sub.method >> 4) + 8 > z->state->wbits) - { - z->state->mode = BAD; - z->msg = (char*)"invalid window size"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - z->state->mode = FLAG; - case FLAG: - NEEDBYTE - b = NEXTBYTE; - if (((z->state->sub.method << 8) + b) % 31) - { - z->state->mode = BAD; - z->msg = (char*)"incorrect header check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Trace((stderr, "inflate: zlib header ok\n")); - if (!(b & PRESET_DICT)) - { - z->state->mode = BLOCKS; - break; - } - z->state->mode = DICT4; - case DICT4: - NEEDBYTE - z->state->sub.check.need = (uLong)NEXTBYTE << 24; - z->state->mode = DICT3; - case DICT3: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 16; - z->state->mode = DICT2; - case DICT2: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 8; - z->state->mode = DICT1; - case DICT1: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE; - z->adler = z->state->sub.check.need; - z->state->mode = DICT0; - return Z_NEED_DICT; - case DICT0: - z->state->mode = BAD; - z->msg = (char*)"need dictionary"; - z->state->sub.marker = 0; /* can try inflateSync */ - return Z_STREAM_ERROR; - case BLOCKS: - r = inflate_blocks(z->state->blocks, z, r); - if (r == Z_DATA_ERROR) - { - z->state->mode = BAD; - z->state->sub.marker = 0; /* can try inflateSync */ - break; - } - if (r != Z_STREAM_END) - return r; - r = Z_OK; - inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); - if (z->state->nowrap) - { - z->state->mode = DONE; - break; - } - z->state->mode = CHECK4; - case CHECK4: - NEEDBYTE - z->state->sub.check.need = (uLong)NEXTBYTE << 24; - z->state->mode = CHECK3; - case CHECK3: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 16; - z->state->mode = CHECK2; - case CHECK2: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 8; - z->state->mode = CHECK1; - case CHECK1: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE; - - if (z->state->sub.check.was != z->state->sub.check.need) - { - z->state->mode = BAD; - z->msg = (char*)"incorrect data check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Trace((stderr, "inflate: zlib check ok\n")); - z->state->mode = DONE; - case DONE: - return Z_STREAM_END; - case BAD: - return Z_DATA_ERROR; - default: - return Z_STREAM_ERROR; - } -} - - -PR_PUBLIC_API(int) inflateSetDictionary(z, dictionary, dictLength) -z_streamp z; -const Bytef *dictionary; -uInt dictLength; -{ - uInt length = dictLength; - - if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0) - return Z_STREAM_ERROR; - - if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; - z->adler = 1L; - - if (length >= ((uInt)1<<z->state->wbits)) - { - length = (1<<z->state->wbits)-1; - dictionary += dictLength - length; - } - inflate_set_dictionary(z->state->blocks, dictionary, length); - z->state->mode = BLOCKS; - return Z_OK; -} - - -PR_PUBLIC_API(int) inflateSync(z) -z_streamp z; -{ - uInt n; /* number of bytes to look at */ - Bytef *p; /* pointer to bytes */ - uInt m; /* number of marker bytes found in a row */ - uLong r, w; /* temporaries to save total_in and total_out */ - - /* set up */ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->mode != BAD) - { - z->state->mode = BAD; - z->state->sub.marker = 0; - } - if ((n = z->avail_in) == 0) - return Z_BUF_ERROR; - p = z->next_in; - m = z->state->sub.marker; - - /* search */ - while (n && m < 4) - { - if (*p == (Byte)(m < 2 ? 0 : 0xff)) - m++; - else if (*p) - m = 0; - else - m = 4 - m; - p++, n--; - } - - /* restore */ - z->total_in += p - z->next_in; - z->next_in = p; - z->avail_in = n; - z->state->sub.marker = m; - - /* return no joy or set up to restart on a new block */ - if (m != 4) - return Z_DATA_ERROR; - r = z->total_in; w = z->total_out; - inflateReset(z); - z->total_in = r; z->total_out = w; - z->state->mode = BLOCKS; - return Z_OK; -} diff --git a/security/nss/cmd/zlib/inftrees.c b/security/nss/cmd/zlib/inftrees.c deleted file mode 100644 index 91dc00375..000000000 --- a/security/nss/cmd/zlib/inftrees.c +++ /dev/null @@ -1,479 +0,0 @@ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ - -#include "zutil.h" -#include "inftrees.h" - -char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ -struct internal_state {int dummy;}; /* for buggy compilers */ - -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - - -local int huft_build OF(( - uIntf *, /* code lengths in bits */ - uInt, /* number of codes */ - uInt, /* number of "simple" codes */ - uIntf *, /* list of base values for non-simple codes */ - uIntf *, /* list of extra bits for non-simple codes */ - inflate_huft * FAR*,/* result: starting table */ - uIntf *, /* maximum lookup bits (returns actual) */ - z_streamp )); /* for zalloc function */ - -local voidpf falloc OF(( - voidpf, /* opaque pointer (not used) */ - uInt, /* number of items */ - uInt)); /* size of item */ - -/* Tables for deflate from PKZIP's appnote.txt. */ -local uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* see note #13 above about 258 */ -local uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ -local uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -local uInt cpdext[30] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ -#define BMAX 15 /* maximum bit length of any code */ -#define N_MAX 288 /* maximum number of codes in any set */ - -#ifdef DEBUG - uInt inflate_hufts; -#endif - -local int huft_build(b, n, s, d, e, t, m, zs) -uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ -uInt n; /* number of codes (assumed <= N_MAX) */ -uInt s; /* number of simple-valued codes (0..s-1) */ -uIntf *d; /* list of base values for non-simple codes */ -uIntf *e; /* list of extra bits for non-simple codes */ -inflate_huft * FAR *t; /* result: starting table */ -uIntf *m; /* maximum lookup bits, returns actual */ -z_streamp zs; /* for zalloc function */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR - if the given code set is incomplete (the tables are still built in this - case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of - set of lengths), or Z_MEM_ERROR if not enough memory. */ -{ - - uInt a; /* counter for codes of length k */ - uInt c[BMAX+1]; /* bit length count table */ - uInt f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register uInt i; /* counter, current code */ - register uInt j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - register uIntf *p; /* pointer into c[], b[], or v[] */ - inflate_huft *q; /* points to current table */ - struct inflate_huft_s r; /* table entry for structure assignment */ - inflate_huft *u[BMAX]; /* table stack */ - uInt v[N_MAX]; /* values in order of bit length */ - register int w; /* bits before this table == (l * h) */ - uInt x[BMAX+1]; /* bit offsets, then code stack */ - uIntf *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - uInt z; /* number of entries in current table */ - - - /* Generate counts for each bit length */ - p = c; -#define C0 *p++ = 0; -#define C2 C0 C0 C0 C0 -#define C4 C2 C2 C2 C2 - C4 /* clear c[]--assume BMAX+1 is 16 */ - p = b; i = n; - do { - c[*p++]++; /* assume all entries <= BMAX */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (inflate_huft *)Z_NULL; - *m = 0; - return Z_OK; - } - - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((uInt)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((uInt)l > i) - l = i; - *m = l; - - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return Z_DATA_ERROR; - if ((y -= c[i]) < 0) - return Z_DATA_ERROR; - c[i] += y; - - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - n = x[g]; /* set n to length of v */ - - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ - q = (inflate_huft *)Z_NULL; /* ditto */ - z = 0; /* ditto */ - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { - a = c[k]; - while (a--) - { - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = g - w; - z = z > (uInt)l ? l : z; /* table size upper limit */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - if (j < z) - while (++j < z) /* try smaller tables up to z bits */ - { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ - } - } - z = 1 << j; /* table entries for j-bit table */ - - /* allocate and link in new table */ - if ((q = (inflate_huft *)ZALLOC - (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) - { - if (h) - inflate_trees_free(u[0], zs); - return Z_MEM_ERROR; /* not enough memory */ - } -#ifdef DEBUG - inflate_hufts += z + 1; -#endif - *t = q + 1; /* link to list for huft_free() */ - *(t = &(q->next)) = Z_NULL; - u[h] = ++q; /* table starts after link */ - - /* connect to last table, if there is one */ - if (h) - { - x[h] = i; /* save pattern for backing up */ - r.bits = (Byte)l; /* bits to dump before this table */ - r.exop = (Byte)j; /* bits in this table */ - r.next = q; /* pointer to this table */ - j = i >> (w - l); /* (get around Turbo C bug) */ - u[h-1][j] = r; /* connect to last table */ - } - } - - /* set up table entry in r */ - r.bits = (Byte)(k - w); - if (p >= v + n) - r.exop = 128 + 64; /* out of values--invalid code */ - else if (*p < s) - { - r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ - r.base = *p++; /* simple code is just the value */ - } - else - { - r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ - r.base = d[*p++ - s]; - } - - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - /* backup over finished tables */ - while ((i & ((1 << w) - 1)) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - } - } - } - - - /* Return Z_BUF_ERROR if we were given an incomplete table */ - return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; -} - - -int inflate_trees_bits(c, bb, tb, z) -uIntf *c; /* 19 code lengths */ -uIntf *bb; /* bits tree desired/actual depth */ -inflate_huft * FAR *tb; /* bits tree result */ -z_streamp z; /* for zfree function */ -{ - int r; - - r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR || *bb == 0) - { - inflate_trees_free(*tb, z); - z->msg = (char*)"incomplete dynamic bit lengths tree"; - r = Z_DATA_ERROR; - } - return r; -} - - -int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) -uInt nl; /* number of literal/length codes */ -uInt nd; /* number of distance codes */ -uIntf *c; /* that many (total) code lengths */ -uIntf *bl; /* literal desired/actual bit depth */ -uIntf *bd; /* distance desired/actual bit depth */ -inflate_huft * FAR *tl; /* literal/length tree result */ -inflate_huft * FAR *td; /* distance tree result */ -z_streamp z; /* for zfree function */ -{ - int r; - - /* build literal/length tree */ - r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z); - if (r != Z_OK || *bl == 0) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed literal/length tree"; - else if (r != Z_MEM_ERROR) - { - inflate_trees_free(*tl, z); - z->msg = (char*)"incomplete literal/length tree"; - r = Z_DATA_ERROR; - } - return r; - } - - /* build distance tree */ - r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z); - if (r != Z_OK || (*bd == 0 && nl > 257)) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed literal/length tree"; - else if (r == Z_BUF_ERROR) { -#ifdef PKZIP_BUG_WORKAROUND - r = Z_OK; - } -#else - inflate_trees_free(*td, z); - z->msg = (char*)"incomplete distance tree"; - r = Z_DATA_ERROR; - } - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"empty distance tree with lengths"; - r = Z_DATA_ERROR; - } - inflate_trees_free(*tl, z); - return r; -#endif - } - - /* done */ - return Z_OK; -} - - -/* build fixed tables only once--keep them here */ -local int fixed_built = 0; -#define FIXEDH 530 /* number of hufts used by fixed tables */ -local inflate_huft fixed_mem[FIXEDH]; -local uInt fixed_bl; -local uInt fixed_bd; -local inflate_huft *fixed_tl; -local inflate_huft *fixed_td; - - -local voidpf falloc(q, n, s) -voidpf q; /* opaque pointer */ -uInt n; /* number of items */ -uInt s; /* size of item */ -{ - Assert(s == sizeof(inflate_huft) && n <= *(intf *)q, - "inflate_trees falloc overflow"); - *(intf *)q -= n+s-s; /* s-s to avoid warning */ - return (voidpf)(fixed_mem + *(intf *)q); -} - - -int inflate_trees_fixed(bl, bd, tl, td) -uIntf *bl; /* literal desired/actual bit depth */ -uIntf *bd; /* distance desired/actual bit depth */ -inflate_huft * FAR *tl; /* literal/length tree result */ -inflate_huft * FAR *td; /* distance tree result */ -{ - /* build fixed tables if not already (multiple overlapped executions ok) */ - if (!fixed_built) - { - int k; /* temporary variable */ - unsigned c[288]; /* length list for huft_build */ - z_stream z; /* for falloc function */ - int f = FIXEDH; /* number of hufts left in fixed_mem */ - - /* set up fake z_stream for memory routines */ - z.zalloc = falloc; - z.zfree = Z_NULL; - z.opaque = (voidpf)&f; - - /* literal table */ - for (k = 0; k < 144; k++) - c[k] = 8; - for (; k < 256; k++) - c[k] = 9; - for (; k < 280; k++) - c[k] = 7; - for (; k < 288; k++) - c[k] = 8; - fixed_bl = 7; - huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); - - /* distance table */ - for (k = 0; k < 30; k++) - c[k] = 5; - fixed_bd = 5; - huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); - - /* done */ - Assert(f == 0, "invalid build of fixed tables"); - fixed_built = 1; - } - *bl = fixed_bl; - *bd = fixed_bd; - *tl = fixed_tl; - *td = fixed_td; - return Z_OK; -} - - -int inflate_trees_free(t, z) -inflate_huft *t; /* table to free */ -z_streamp z; /* for zfree function */ -/* Free the malloc'ed tables built by huft_build(), which makes a linked - list of the tables it made, with the links in a dummy first entry of - each table. */ -{ - register inflate_huft *p, *q, *r; - - /* Reverse linked list */ - p = Z_NULL; - q = t; - while (q != Z_NULL) - { - r = (q - 1)->next; - (q - 1)->next = p; - p = q; - q = r; - } - /* Go through linked list, freeing from the malloced (t[-1]) address. */ - while (p != Z_NULL) - { - q = (--p)->next; - ZFREE(z,p); - p = q; - } - return Z_OK; -} diff --git a/security/nss/cmd/zlib/inftrees.h b/security/nss/cmd/zlib/inftrees.h deleted file mode 100644 index b06613ddd..000000000 --- a/security/nss/cmd/zlib/inftrees.h +++ /dev/null @@ -1,59 +0,0 @@ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). */ - -typedef struct inflate_huft_s FAR inflate_huft; - -struct inflate_huft_s { - union { - struct { - Byte Exop; /* number of extra bits or operation */ - Byte Bits; /* number of bits in this code or subcode */ - } what; - Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ - } word; /* 16-bit, 8 bytes for 32-bit machines) */ - union { - uInt Base; /* literal, length base, or distance base */ - inflate_huft *Next; /* pointer to next level of table */ - } more; -}; - -#ifdef DEBUG - extern uInt inflate_hufts; -#endif - -extern int inflate_trees_bits OF(( - uIntf *, /* 19 code lengths */ - uIntf *, /* bits tree desired/actual depth */ - inflate_huft * FAR *, /* bits tree result */ - z_streamp )); /* for zalloc, zfree functions */ - -extern int inflate_trees_dynamic OF(( - uInt, /* number of literal/length codes */ - uInt, /* number of distance codes */ - uIntf *, /* that many (total) code lengths */ - uIntf *, /* literal desired/actual bit depth */ - uIntf *, /* distance desired/actual bit depth */ - inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *, /* distance tree result */ - z_streamp )); /* for zalloc, zfree functions */ - -extern int inflate_trees_fixed OF(( - uIntf *, /* literal desired/actual bit depth */ - uIntf *, /* distance desired/actual bit depth */ - inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *)); /* distance tree result */ - -extern int inflate_trees_free OF(( - inflate_huft *, /* tables to free */ - z_streamp )); /* for zfree function */ - diff --git a/security/nss/cmd/zlib/infutil.c b/security/nss/cmd/zlib/infutil.c deleted file mode 100644 index eb21199c3..000000000 --- a/security/nss/cmd/zlib/infutil.c +++ /dev/null @@ -1,87 +0,0 @@ -/* inflate_util.c -- data and routines common to blocks and codes - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "infblock.h" -#include "inftrees.h" -#include "infcodes.h" -#include "infutil.h" - -struct inflate_codes_state {int dummy;}; /* for buggy compilers */ - -/* And'ing with mask[n] masks the lower n bits */ -uInt inflate_mask[17] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - - -/* copy as much as possible from the sliding window to the output area */ -int inflate_flush(s, z, r) -inflate_blocks_statef *s; -z_streamp z; -int r; -{ - uInt n; - Bytef *p; - Bytef *q; - - /* local copies of source and destination pointers */ - p = z->next_out; - q = s->read; - - /* compute number of bytes to copy as far as end of window */ - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy as far as end of window */ - zmemcpy(p, q, n); - p += n; - q += n; - - /* see if more to copy at beginning of window */ - if (q == s->end) - { - /* wrap pointers */ - q = s->window; - if (s->write == s->end) - s->write = s->window; - - /* compute bytes to copy */ - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy */ - zmemcpy(p, q, n); - p += n; - q += n; - } - - /* update pointers */ - z->next_out = p; - s->read = q; - - /* done */ - return r; -} diff --git a/security/nss/cmd/zlib/infutil.h b/security/nss/cmd/zlib/infutil.h deleted file mode 100644 index 702cd290c..000000000 --- a/security/nss/cmd/zlib/infutil.h +++ /dev/null @@ -1,99 +0,0 @@ -/* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995-1996 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _INFUTIL_H -#define _INFUTIL_H - -typedef enum { - TYPE, /* get type bits (3, including end bit) */ - LENS, /* get lengths for stored */ - STORED, /* processing stored block */ - TABLE, /* get table lengths */ - BTREE, /* get bit lengths tree for a dynamic block */ - DTREE, /* get length, distance trees for a dynamic block */ - CODES, /* processing fixed or dynamic block */ - DRY, /* output remaining window bytes */ - DONE, /* finished last block, done */ - BAD} /* got a data error--stuck here */ -inflate_block_mode; - -/* inflate blocks semi-private state */ -struct inflate_blocks_state { - - /* mode */ - inflate_block_mode mode; /* current inflate_block mode */ - - /* mode dependent information */ - union { - uInt left; /* if STORED, bytes left to copy */ - struct { - uInt table; /* table lengths (14 bits) */ - uInt index; /* index into blens (or border) */ - uIntf *blens; /* bit lengths of codes */ - uInt bb; /* bit length tree depth */ - inflate_huft *tb; /* bit length decoding tree */ - } trees; /* if DTREE, decoding info for trees */ - struct { - inflate_huft *tl; - inflate_huft *td; /* trees to free */ - inflate_codes_statef - *codes; - } decode; /* if CODES, current state */ - } sub; /* submode */ - uInt last; /* true if this block is the last block */ - - /* mode independent information */ - uInt bitk; /* bits in bit buffer */ - uLong bitb; /* bit buffer */ - Bytef *window; /* sliding window */ - Bytef *end; /* one byte after sliding window */ - Bytef *read; /* window read pointer */ - Bytef *write; /* window write pointer */ - check_func checkfn; /* check function */ - uLong check; /* check on output */ - -}; - - -/* defines for inflate input/output */ -/* update pointers and return */ -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -/* get bytes and bits */ -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} -#define DUMPBITS(j) {b>>=(j);k-=(j);} -/* output bytes */ -#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -/* load local pointers */ -#define LOAD {LOADIN LOADOUT} - -/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ -extern uInt inflate_mask[17]; - -/* copy as much as possible from the sliding window to the output area */ -extern int inflate_flush OF(( - inflate_blocks_statef *, - z_streamp , - int)); - -struct internal_state {int dummy;}; /* for buggy compilers */ - -#endif diff --git a/security/nss/cmd/zlib/makefile.win b/security/nss/cmd/zlib/makefile.win deleted file mode 100644 index 0f87b40b8..000000000 --- a/security/nss/cmd/zlib/makefile.win +++ /dev/null @@ -1,91 +0,0 @@ -NODEPEND=1 -IGNORE_MANIFEST = 1 - -#//------------------------------------------------------------------------ -#// -# New build system where zip dll is build indepenant of java stubs. -#// -#//------------------------------------------------------------------------ -MODULE = zlib -EXPORTS = \ - zlib.h \ - zconf.h \ - $(NULL) - - -#//------------------------------------------------------------------------ -#// -#// Specify the depth of the current directory relative to the -#// root of NS -#// -#//------------------------------------------------------------------------ -DEPTH= ..\..\..\ - -MAKE_OBJ_TYPE=DLL -#//------------------------------------------------------------------------ -#// -#// Define any Public Make Variables here: (ie. PDFFILE, MAPFILE, ...) -#// -#//------------------------------------------------------------------------ -DLLNAME=$(ZIPDLL) -PDBFILE=$(MOD_ZIP).pdb -MAPFILE=$(MOD_ZIP).map -!if "$(MOZ_BITS)" == "16" -DEFFILE=zip16.def -!endif -#RESFILE=zip.res - -#//------------------------------------------------------------------------ -#// -#// Define the files necessary to build the target (ie. OBJS) -#// -#//------------------------------------------------------------------------ -OBJS= \ - .\$(OBJDIR)\adler32.obj \ - .\$(OBJDIR)\compress.obj \ - .\$(OBJDIR)\crc32.obj \ - .\$(OBJDIR)\deflate.obj \ - .\$(OBJDIR)\gzio.obj \ - .\$(OBJDIR)\infblock.obj \ - .\$(OBJDIR)\infcodes.obj \ - .\$(OBJDIR)\inffast.obj \ - .\$(OBJDIR)\inflate.obj \ - .\$(OBJDIR)\inftrees.obj \ - .\$(OBJDIR)\infutil.obj \ - .\$(OBJDIR)\trees.obj \ - .\$(OBJDIR)\uncompr.obj \ - .\$(OBJDIR)\zutil.obj \ - $(NULL) - -#//------------------------------------------------------------------------ -#// -#// Define any Public Targets here (ie. PROGRAM, LIBRARY, DLL, ...) -#// (these must be defined before the common makefiles are included) -#// -#//------------------------------------------------------------------------ - -DLL=.\$(OBJDIR)\$(DLLNAME) -MAPFILE= $(MOD_ZIP).map - - -#//------------------------------------------------------------------------ -#// -#// Define any local options for the make tools -#// (ie. LCFLAGS, LLFLAGS, LLIBS, LINCS) -#// -#//------------------------------------------------------------------------ -LLIBS=$(LLIBS) $(LIBNSPR) -LINCS=$(LINCS) -I. -I_gen -# clobber and clobber_all will remove the following garbage: -GARBAGE = $(GARBAGE) _gen - -#//------------------------------------------------------------------------ -#// -#// Include the common makefile rules -#// -#//------------------------------------------------------------------------ -include <$(DEPTH)/sun-java/config/rules.mak> - -export:: $(DLL) - $(MAKE_INSTALL) .\$(OBJDIR)\$(DLLNAME) $(DIST)\bin - $(MAKE_INSTALL) .\$(OBJDIR)\$(MOD_ZIP).lib $(DIST)\lib diff --git a/security/nss/cmd/zlib/manifest.mn b/security/nss/cmd/zlib/manifest.mn deleted file mode 100644 index 6b4fbd4ec..000000000 --- a/security/nss/cmd/zlib/manifest.mn +++ /dev/null @@ -1,60 +0,0 @@ -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# The Original Code is the Netscape security libraries. -# -# The Initial Developer of the Original Code is Netscape -# Communications Corporation. Portions created by Netscape are -# Copyright (C) 1994-2000 Netscape Communications Corporation. All -# Rights Reserved. -# -# Contributor(s): -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU General Public License Version 2 or later (the -# "GPL"), in which case the provisions of the GPL are applicable -# instead of those above. If you wish to allow use of your -# version of this file only under the terms of the GPL and not to -# allow others to use your version of this file under the MPL, -# indicate your decision by deleting the provisions above and -# replace them with the notice and other provisions required by -# the GPL. If you do not delete the provisions above, a recipient -# may use your version of this file under either the MPL or the -# GPL. -# - -CORE_DEPTH = ../../.. - -MODULE = seccmd - -EXPORTS = zlib.h zconf.h - -CSRCS = adler32.c \ - crc32.c \ - compress.c \ - uncompr.c \ - deflate.c \ - trees.c \ - zutil.c \ - inflate.c \ - infblock.c \ - inftrees.c \ - infcodes.c \ - infutil.c \ - inffast.c \ - $(NULL) - -LIBRARY_NAME = zlib - -# REQUIRES = security - -DEFINES = -DNSPR20=1 -DMOZILLA_CLIENT=1 - diff --git a/security/nss/cmd/zlib/minigzip.c b/security/nss/cmd/zlib/minigzip.c deleted file mode 100644 index 60a48a12d..000000000 --- a/security/nss/cmd/zlib/minigzip.c +++ /dev/null @@ -1,246 +0,0 @@ -/* minigzip.c -- simulate gzip using the zlib compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * minigzip is a minimal implementation of the gzip utility. This is - * only an example of using zlib and isn't meant to replace the - * full-featured gzip. No attempt is made to deal with file systems - * limiting names to 14 or 8+3 characters, etc... Error checking is - * very limited. So use minigzip only for testing; use gzip for the - * real thing. On MSDOS, use only on file names without extension - * or in pipe mode. - */ - -/* $Id$ */ - -#include <stdio.h> -#include "zlib.h" - -#ifdef STDC -# include <string.h> -# include <stdlib.h> -#else - extern void exit OF((int)); -#endif - - -#if defined(MSDOS) || defined(OS2) || defined(WIN32) -# include <fcntl.h> -# include <io.h> -# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) -#else -# define SET_BINARY_MODE(file) -#endif - -#ifdef VMS -# define unlink delete -# define GZ_SUFFIX "-gz" -#endif -#ifdef RISCOS -# define unlink remove -# define GZ_SUFFIX "-gz" -# define fileno(file) file->__file -#endif - -#ifndef GZ_SUFFIX -# define GZ_SUFFIX ".gz" -#endif -#define SUFFIX_LEN sizeof(GZ_SUFFIX) - -extern int unlink OF((const char *)); - -#define BUFLEN 4096 -#define MAX_NAME_LEN 1024 - -#define local static -/* For MSDOS and other systems with limitation on stack size. For Unix, - #define local - works also. - */ - -char *prog; - -void error OF((const char *msg)); -void gz_compress OF((FILE *in, gzFile out)); -void gz_uncompress OF((gzFile in, FILE *out)); -void file_compress OF((char *file)); -void file_uncompress OF((char *file)); -int main OF((int argc, char *argv[])); - -/* =========================================================================== - * Display error message and exit - */ -void error(msg) - const char *msg; -{ - fprintf(stderr, "%s: %s\n", prog, msg); - exit(1); -} - -/* =========================================================================== - * Compress input to output then close both files. - */ -void gz_compress(in, out) - FILE *in; - gzFile out; -{ - local char buf[BUFLEN]; - int len; - int err; - - for (;;) { - len = fread(buf, 1, sizeof(buf), in); - if (ferror(in)) { - perror("fread"); - exit(1); - } - if (len == 0) break; - - if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); - } - fclose(in); - if (gzclose(out) != Z_OK) error("failed gzclose"); -} - -/* =========================================================================== - * Uncompress input to output then close both files. - */ -void gz_uncompress(in, out) - gzFile in; - FILE *out; -{ - local char buf[BUFLEN]; - int len; - int err; - - for (;;) { - len = gzread(in, buf, sizeof(buf)); - if (len < 0) error (gzerror(in, &err)); - if (len == 0) break; - - if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { - error("failed fwrite"); - } - } - if (fclose(out)) error("failed fclose"); - - if (gzclose(in) != Z_OK) error("failed gzclose"); -} - - -/* =========================================================================== - * Compress the given file: create a corresponding .gz file and remove the - * original. - */ -void file_compress(file) - char *file; -{ - local char outfile[MAX_NAME_LEN]; - FILE *in; - gzFile out; - - strcpy(outfile, file); - strcat(outfile, GZ_SUFFIX); - - in = fopen(file, "rb"); - if (in == NULL) { - perror(file); - exit(1); - } - out = gzopen(outfile, "wb"); /* use "wb9" for maximal compression */ - if (out == NULL) { - fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); - exit(1); - } - gz_compress(in, out); - - unlink(file); -} - - -/* =========================================================================== - * Uncompress the given file and remove the original. - */ -void file_uncompress(file) - char *file; -{ - local char buf[MAX_NAME_LEN]; - char *infile, *outfile; - FILE *out; - gzFile in; - int len = strlen(file); - - strcpy(buf, file); - - if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { - infile = file; - outfile = buf; - outfile[len-3] = '\0'; - } else { - outfile = file; - infile = buf; - strcat(infile, GZ_SUFFIX); - } - in = gzopen(infile, "rb"); - if (in == NULL) { - fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); - exit(1); - } - out = fopen(outfile, "wb"); - if (out == NULL) { - perror(file); - exit(1); - } - - gz_uncompress(in, out); - - unlink(infile); -} - - -/* =========================================================================== - * Usage: minigzip [-d] [files...] - */ - -int main(argc, argv) - int argc; - char *argv[]; -{ - int uncompr = 0; - gzFile file; - - prog = argv[0]; - argc--, argv++; - - if (argc > 0) { - uncompr = (strcmp(*argv, "-d") == 0); - if (uncompr) { - argc--, argv++; - } - } - if (argc == 0) { - SET_BINARY_MODE(stdin); - SET_BINARY_MODE(stdout); - if (uncompr) { - file = gzdopen(fileno(stdin), "rb"); - if (file == NULL) error("can't gzdopen stdin"); - gz_uncompress(file, stdout); - } else { - file = gzdopen(fileno(stdout), "wb"); /* "wb9" for max compr. */ - if (file == NULL) error("can't gzdopen stdout"); - gz_compress(stdin, file); - } - } else { - do { - if (uncompr) { - file_uncompress(*argv); - } else { - file_compress(*argv); - } - } while (argv++, --argc); - } - exit(0); - return 0; /* to avoid warning */ -} diff --git a/security/nss/cmd/zlib/netscape_mods.doc b/security/nss/cmd/zlib/netscape_mods.doc deleted file mode 100644 index c8a72d159..000000000 --- a/security/nss/cmd/zlib/netscape_mods.doc +++ /dev/null @@ -1,43 +0,0 @@ - -/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- - * - * The contents of this file are subject to the Netscape Public - * License Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. You may obtain a copy of - * the License at http://www.mozilla.org/NPL/ - * - * Software distributed under the License is distributed on an "AS - * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - * implied. See the License for the specific language governing - * rights and limitations under the License. - * - * The Original Code is mozilla.org code. - * - * The Initial Developer of the Original Code is Netscape - * Communications Corporation. Portions created by Netscape are - * Copyright (C) 1998 Netscape Communications Corporation. All - * Rights Reserved. - * - * Contributor(s): - */ - -Netscape Modifications to Zlib source - - - -Changes were made to the following files to -create a zlib dll: - - adler32.c - compress.c - crc32.c - deflate.c - gzio.c - inflate.c - uncompr.c - zutil.c - - -Various changes for cross platform builds -are clearly marked through out the source. - - diff --git a/security/nss/cmd/zlib/stubs.c b/security/nss/cmd/zlib/stubs.c deleted file mode 100644 index 2e7a053ef..000000000 --- a/security/nss/cmd/zlib/stubs.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - !!! WARNING: If you add files here, be sure to: - 1. add them to the Metrowerks project - 2. edit Makefile and makefile.win to add a dependency on the .c file -*/ - - -/* XXX Mac */ -#ifndef XP_MAC -#include "_stubs/java_util_zip_Adler32.c" -#include "_stubs/java_util_zip_CRC32.c" -#include "_stubs/java_util_zip_Deflater.c" -#include "_stubs/java_util_zip_Inflater.c" -PR_PUBLIC_API(void) _java_zlib_init(void) { } -#endif - - diff --git a/security/nss/cmd/zlib/trees.c b/security/nss/cmd/zlib/trees.c deleted file mode 100644 index 84623d992..000000000 --- a/security/nss/cmd/zlib/trees.c +++ /dev/null @@ -1,1143 +0,0 @@ -/* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-1996 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* - * ALGORITHM - * - * The "deflation" process uses several Huffman trees. The more - * common source values are represented by shorter bit sequences. - * - * Each code tree is stored in a compressed form which is itself - * a Huffman encoding of the lengths of all the code strings (in - * ascending order by source values). The actual code strings are - * reconstructed from the lengths in the inflate process, as described - * in the deflate specification. - * - * REFERENCES - * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc - * - * Storer, James A. - * Data Compression: Methods and Theory, pp. 49-50. - * Computer Science Press, 1988. ISBN 0-7167-8156-5. - * - * Sedgewick, R. - * Algorithms, p290. - * Addison-Wesley, 1983. ISBN 0-201-06672-6. - */ - -/* $Id$ */ - -#include "deflate.h" - -#ifdef DEBUG -# include <ctype.h> -#endif - -/* =========================================================================== - * Constants - */ - -#define MAX_BL_BITS 7 -/* Bit length codes must not exceed MAX_BL_BITS bits */ - -#define END_BLOCK 256 -/* end of block literal code */ - -#define REP_3_6 16 -/* repeat previous bit length 3-6 times (2 bits of repeat count) */ - -#define REPZ_3_10 17 -/* repeat a zero length 3-10 times (3 bits of repeat count) */ - -#define REPZ_11_138 18 -/* repeat a zero length 11-138 times (7 bits of repeat count) */ - -local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ - = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; - -local int extra_dbits[D_CODES] /* extra bits for each distance code */ - = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; - -local int extra_blbits[BL_CODES]/* extra bits for each bit length code */ - = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; - -local uch bl_order[BL_CODES] - = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; -/* The lengths of the bit length codes are sent in order of decreasing - * probability, to avoid transmitting the lengths for unused bit length codes. - */ - -#define Buf_size (8 * 2*sizeof(char)) -/* Number of bits used within bi_buf. (bi_buf might be implemented on - * more than 16 bits on some systems.) - */ - -/* =========================================================================== - * Local data. These are initialized only once. - */ - -local ct_data static_ltree[L_CODES+2]; -/* The static literal tree. Since the bit lengths are imposed, there is no - * need for the L_CODES extra codes used during heap construction. However - * The codes 286 and 287 are needed to build a canonical tree (see _tr_init - * below). - */ - -local ct_data static_dtree[D_CODES]; -/* The static distance tree. (Actually a trivial tree since all codes use - * 5 bits.) - */ - -local uch dist_code[512]; -/* distance codes. The first 256 values correspond to the distances - * 3 .. 258, the last 256 values correspond to the top 8 bits of - * the 15 bit distances. - */ - -local uch length_code[MAX_MATCH-MIN_MATCH+1]; -/* length code for each normalized match length (0 == MIN_MATCH) */ - -local int base_length[LENGTH_CODES]; -/* First normalized length for each code (0 = MIN_MATCH) */ - -local int base_dist[D_CODES]; -/* First normalized distance for each code (0 = distance of 1) */ - -struct static_tree_desc_s { - ct_data *static_tree; /* static tree or NULL */ - intf *extra_bits; /* extra bits for each code or NULL */ - int extra_base; /* base index for extra_bits */ - int elems; /* max number of elements in the tree */ - int max_length; /* max bit length for the codes */ -}; - -local static_tree_desc static_l_desc = -{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; - -local static_tree_desc static_d_desc = -{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; - -local static_tree_desc static_bl_desc = -{(ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; - -/* =========================================================================== - * Local (static) routines in this file. - */ - -local void tr_static_init OF((void)); -local void init_block OF((deflate_state *s)); -local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); -local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); -local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); -local void build_tree OF((deflate_state *s, tree_desc *desc)); -local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local int build_bl_tree OF((deflate_state *s)); -local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, - int blcodes)); -local void compress_block OF((deflate_state *s, ct_data *ltree, - ct_data *dtree)); -local void set_data_type OF((deflate_state *s)); -local unsigned bi_reverse OF((unsigned value, int length)); -local void bi_windup OF((deflate_state *s)); -local void bi_flush OF((deflate_state *s)); -local void copy_block OF((deflate_state *s, charf *buf, unsigned len, - int header)); - -#ifndef DEBUG_NEVER -# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) - /* Send a code of the given tree. c and tree must not have side effects */ - -#else /* DEBUG */ -# define send_code(s, c, tree) \ - { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ - send_bits(s, tree[c].Code, tree[c].Len); } -#endif - -#define d_code(dist) \ - ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)]) -/* Mapping from a distance to a distance code. dist is the distance - 1 and - * must not have side effects. dist_code[256] and dist_code[257] are never - * used. - */ - -/* =========================================================================== - * Output a short LSB first on the stream. - * IN assertion: there is enough room in pendingBuf. - */ -#define put_short(s, w) { \ - put_byte(s, (uch)((w) & 0xff)); \ - put_byte(s, (uch)((ush)(w) >> 8)); \ -} - -/* =========================================================================== - * Send a value on a given number of bits. - * IN assertion: length <= 16 and value fits in length bits. - */ -#ifdef DEBUG -local void send_bits OF((deflate_state *s, int value, int length)); - -local void send_bits(s, value, length) - deflate_state *s; - int value; /* value to send */ - int length; /* number of bits */ -{ - Tracevv((stderr," l %2d v %4x ", length, value)); - Assert(length > 0 && length <= 15, "invalid length"); - s->bits_sent += (ulg)length; - - /* If not enough room in bi_buf, use (valid) bits from bi_buf and - * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) - * unused bits in value. - */ - if (s->bi_valid > (int)Buf_size - length) { - s->bi_buf |= (value << s->bi_valid); - put_short(s, s->bi_buf); - s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); - s->bi_valid += length - Buf_size; - } else { - s->bi_buf |= value << s->bi_valid; - s->bi_valid += length; - } -} -#else /* !DEBUG */ - -#define send_bits(s, value, length) \ -{ int len = length;\ - if (s->bi_valid > (int)Buf_size - len) {\ - int val = value;\ - s->bi_buf |= (val << s->bi_valid);\ - put_short(s, s->bi_buf);\ - s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ - s->bi_valid += len - Buf_size;\ - } else {\ - s->bi_buf |= (value) << s->bi_valid;\ - s->bi_valid += len;\ - }\ -} -#endif /* DEBUG */ - - -#ifndef MAX -#define MAX(a,b) (a >= b ? a : b) -#endif -/* the arguments must not have side effects */ - -/* =========================================================================== - * Initialize the various 'constant' tables. In a multi-threaded environment, - * this function may be called by two threads concurrently, but this is - * harmless since both invocations do exactly the same thing. - */ -local void tr_static_init() -{ - static int static_init_done = 0; - int n; /* iterates over tree elements */ - int bits; /* bit counter */ - int length; /* length value */ - int code; /* code value */ - int dist; /* distance index */ - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - if (static_init_done) return; - - /* Initialize the mapping length (0..255) -> length code (0..28) */ - length = 0; - for (code = 0; code < LENGTH_CODES-1; code++) { - base_length[code] = length; - for (n = 0; n < (1<<extra_lbits[code]); n++) { - length_code[length++] = (uch)code; - } - } - Assert (length == 256, "tr_static_init: length != 256"); - /* Note that the length 255 (match length 258) can be represented - * in two different ways: code 284 + 5 bits or code 285, so we - * overwrite length_code[255] to use the best encoding: - */ - length_code[length-1] = (uch)code; - - /* Initialize the mapping dist (0..32K) -> dist code (0..29) */ - dist = 0; - for (code = 0 ; code < 16; code++) { - base_dist[code] = dist; - for (n = 0; n < (1<<extra_dbits[code]); n++) { - dist_code[dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: dist != 256"); - dist >>= 7; /* from now on, all distances are divided by 128 */ - for ( ; code < D_CODES; code++) { - base_dist[code] = dist << 7; - for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { - dist_code[256 + dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: 256+dist != 512"); - - /* Construct the codes of the static literal tree */ - for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; - n = 0; - while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; - while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; - while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; - while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; - /* Codes 286 and 287 do not exist, but we must include them in the - * tree construction to get a canonical Huffman tree (longest code - * all ones) - */ - gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); - - /* The static distance tree is trivial: */ - for (n = 0; n < D_CODES; n++) { - static_dtree[n].Len = 5; - static_dtree[n].Code = bi_reverse((unsigned)n, 5); - } - static_init_done = 1; -} - -/* =========================================================================== - * Initialize the tree data structures for a new zlib stream. - */ -void _tr_init(s) - deflate_state *s; -{ - tr_static_init(); - - s->compressed_len = 0L; - - s->l_desc.dyn_tree = s->dyn_ltree; - s->l_desc.stat_desc = &static_l_desc; - - s->d_desc.dyn_tree = s->dyn_dtree; - s->d_desc.stat_desc = &static_d_desc; - - s->bl_desc.dyn_tree = s->bl_tree; - s->bl_desc.stat_desc = &static_bl_desc; - - s->bi_buf = 0; - s->bi_valid = 0; - s->last_eob_len = 8; /* enough lookahead for inflate */ -#ifdef DEBUG - s->bits_sent = 0L; -#endif - - /* Initialize the first block of the first file: */ - init_block(s); -} - -/* =========================================================================== - * Initialize a new block. - */ -local void init_block(s) - deflate_state *s; -{ - int n; /* iterates over tree elements */ - - /* Initialize the trees. */ - for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; - for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; - for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; - - s->dyn_ltree[END_BLOCK].Freq = 1; - s->opt_len = s->static_len = 0L; - s->last_lit = s->matches = 0; -} - -#define SMALLEST 1 -/* Index within the heap array of least frequent node in the Huffman tree */ - - -/* =========================================================================== - * Remove the smallest element from the heap and recreate the heap with - * one less element. Updates heap and heap_len. - */ -#define pqremove(s, tree, top) \ -{\ - top = s->heap[SMALLEST]; \ - s->heap[SMALLEST] = s->heap[s->heap_len--]; \ - pqdownheap(s, tree, SMALLEST); \ -} - -/* =========================================================================== - * Compares to subtrees, using the tree depth as tie breaker when - * the subtrees have equal frequency. This minimizes the worst case length. - */ -#define smaller(tree, n, m, depth) \ - (tree[n].Freq < tree[m].Freq || \ - (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) - -/* =========================================================================== - * Restore the heap property by moving down the tree starting at node k, - * exchanging a node with the smallest of its two sons if necessary, stopping - * when the heap property is re-established (each father smaller than its - * two sons). - */ -local void pqdownheap(s, tree, k) - deflate_state *s; - ct_data *tree; /* the tree to restore */ - int k; /* node to move down */ -{ - int v = s->heap[k]; - int j = k << 1; /* left son of k */ - while (j <= s->heap_len) { - /* Set j to the smallest of the two sons: */ - if (j < s->heap_len && - smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { - j++; - } - /* Exit if v is smaller than both sons */ - if (smaller(tree, v, s->heap[j], s->depth)) break; - - /* Exchange v with the smallest son */ - s->heap[k] = s->heap[j]; k = j; - - /* And continue down the tree, setting j to the left son of k */ - j <<= 1; - } - s->heap[k] = v; -} - -/* =========================================================================== - * Compute the optimal bit lengths for a tree and update the total bit length - * for the current block. - * IN assertion: the fields freq and dad are set, heap[heap_max] and - * above are the tree nodes sorted by increasing frequency. - * OUT assertions: the field len is set to the optimal bit length, the - * array bl_count contains the frequencies for each bit length. - * The length opt_len is updated; static_len is also updated if stree is - * not null. - */ -local void gen_bitlen(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - int max_code = desc->max_code; - ct_data *stree = desc->stat_desc->static_tree; - intf *extra = desc->stat_desc->extra_bits; - int base = desc->stat_desc->extra_base; - int max_length = desc->stat_desc->max_length; - int h; /* heap index */ - int n, m; /* iterate over the tree elements */ - int bits; /* bit length */ - int xbits; /* extra bits */ - ush f; /* frequency */ - int overflow = 0; /* number of elements with bit length too large */ - - for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; - - /* In a first pass, compute the optimal bit lengths (which may - * overflow in the case of the bit length tree). - */ - tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ - - for (h = s->heap_max+1; h < HEAP_SIZE; h++) { - n = s->heap[h]; - bits = tree[tree[n].Dad].Len + 1; - if (bits > max_length) bits = max_length, overflow++; - tree[n].Len = (ush)bits; - /* We overwrite tree[n].Dad which is no longer needed */ - - if (n > max_code) continue; /* not a leaf node */ - - s->bl_count[bits]++; - xbits = 0; - if (n >= base) xbits = extra[n-base]; - f = tree[n].Freq; - s->opt_len += (ulg)f * (bits + xbits); - if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); - } - if (overflow == 0) return; - - Trace((stderr,"\nbit length overflow\n")); - /* This happens for example on obj2 and pic of the Calgary corpus */ - - /* Find the first bit length which could increase: */ - do { - bits = max_length-1; - while (s->bl_count[bits] == 0) bits--; - s->bl_count[bits]--; /* move one leaf down the tree */ - s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ - s->bl_count[max_length]--; - /* The brother of the overflow item also moves one step up, - * but this does not affect bl_count[max_length] - */ - overflow -= 2; - } while (overflow > 0); - - /* Now recompute all bit lengths, scanning in increasing frequency. - * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all - * lengths instead of fixing only the wrong ones. This idea is taken - * from 'ar' written by Haruhiko Okumura.) - */ - for (bits = max_length; bits != 0; bits--) { - n = s->bl_count[bits]; - while (n != 0) { - m = s->heap[--h]; - if (m > max_code) continue; - if (tree[m].Len != (unsigned) bits) { - Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); - s->opt_len += ((long)bits - (long)tree[m].Len) - *(long)tree[m].Freq; - tree[m].Len = (ush)bits; - } - n--; - } - } -} - -/* =========================================================================== - * Generate the codes for a given tree and bit counts (which need not be - * optimal). - * IN assertion: the array bl_count contains the bit length statistics for - * the given tree and the field len is set for all tree elements. - * OUT assertion: the field code is set for all tree elements of non - * zero code length. - */ -local void gen_codes (tree, max_code, bl_count) - ct_data *tree; /* the tree to decorate */ - int max_code; /* largest code with non zero frequency */ - ushf *bl_count; /* number of codes at each bit length */ -{ - ush next_code[MAX_BITS+1]; /* next code value for each bit length */ - ush code = 0; /* running code value */ - int bits; /* bit index */ - int n; /* code index */ - - /* The distribution counts are first used to generate the code values - * without bit reversal. - */ - for (bits = 1; bits <= MAX_BITS; bits++) { - next_code[bits] = code = (code + bl_count[bits-1]) << 1; - } - /* Check that the bit counts in bl_count are consistent. The last code - * must be all ones. - */ - Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1, - "inconsistent bit counts"); - Tracev((stderr,"\ngen_codes: max_code %d ", max_code)); - - for (n = 0; n <= max_code; n++) { - int len = tree[n].Len; - if (len == 0) continue; - /* Now reverse the bits */ - tree[n].Code = bi_reverse(next_code[len]++, len); - - Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ", - n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1)); - } -} - -/* =========================================================================== - * Construct one Huffman tree and assigns the code bit strings and lengths. - * Update the total bit length for the current block. - * IN assertion: the field freq is set for all tree elements. - * OUT assertions: the fields len and code are set to the optimal bit length - * and corresponding code. The length opt_len is updated; static_len is - * also updated if stree is not null. The field max_code is set. - */ -local void build_tree(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - ct_data *stree = desc->stat_desc->static_tree; - int elems = desc->stat_desc->elems; - int n, m; /* iterate over heap elements */ - int max_code = -1; /* largest code with non zero frequency */ - int node; /* new node being created */ - - /* Construct the initial heap, with least frequent element in - * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. - * heap[0] is not used. - */ - s->heap_len = 0, s->heap_max = HEAP_SIZE; - - for (n = 0; n < elems; n++) { - if (tree[n].Freq != 0) { - s->heap[++(s->heap_len)] = max_code = n; - s->depth[n] = 0; - } else { - tree[n].Len = 0; - } - } - - /* The pkzip format requires that at least one distance code exists, - * and that at least one bit should be sent even if there is only one - * possible code. So to avoid special checks later on we force at least - * two codes of non zero frequency. - */ - while (s->heap_len < 2) { - node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); - tree[node].Freq = 1; - s->depth[node] = 0; - s->opt_len--; if (stree) s->static_len -= stree[node].Len; - /* node is 0 or 1 so it does not have extra bits */ - } - desc->max_code = max_code; - - /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, - * establish sub-heaps of increasing lengths: - */ - for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); - - /* Construct the Huffman tree by repeatedly combining the least two - * frequent nodes. - */ - node = elems; /* next internal node of the tree */ - do { - pqremove(s, tree, n); /* n = node of least frequency */ - m = s->heap[SMALLEST]; /* m = node of next least frequency */ - - s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ - s->heap[--(s->heap_max)] = m; - - /* Create a new node father of n and m */ - tree[node].Freq = tree[n].Freq + tree[m].Freq; - s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1); - tree[n].Dad = tree[m].Dad = (ush)node; -#ifdef DUMP_BL_TREE - if (tree == s->bl_tree) { - fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", - node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); - } -#endif - /* and insert the new node in the heap */ - s->heap[SMALLEST] = node++; - pqdownheap(s, tree, SMALLEST); - - } while (s->heap_len >= 2); - - s->heap[--(s->heap_max)] = s->heap[SMALLEST]; - - /* At this point, the fields freq and dad are set. We can now - * generate the bit lengths. - */ - gen_bitlen(s, (tree_desc *)desc); - - /* The field len is now set, we can generate the bit codes */ - gen_codes ((ct_data *)tree, max_code, s->bl_count); -} - -/* =========================================================================== - * Scan a literal or distance tree to determine the frequencies of the codes - * in the bit length tree. - */ -local void scan_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - if (nextlen == 0) max_count = 138, min_count = 3; - tree[max_code+1].Len = (ush)0xffff; /* guard */ - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - s->bl_tree[curlen].Freq += count; - } else if (curlen != 0) { - if (curlen != prevlen) s->bl_tree[curlen].Freq++; - s->bl_tree[REP_3_6].Freq++; - } else if (count <= 10) { - s->bl_tree[REPZ_3_10].Freq++; - } else { - s->bl_tree[REPZ_11_138].Freq++; - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Send a literal or distance tree in compressed form, using the codes in - * bl_tree. - */ -local void send_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - /* tree[max_code+1].Len = -1; */ /* guard already set */ - if (nextlen == 0) max_count = 138, min_count = 3; - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - do { send_code(s, curlen, s->bl_tree); } while (--count != 0); - - } else if (curlen != 0) { - if (curlen != prevlen) { - send_code(s, curlen, s->bl_tree); count--; - } - Assert(count >= 3 && count <= 6, " 3_6?"); - send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); - - } else if (count <= 10) { - send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); - - } else { - send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Construct the Huffman tree for the bit lengths and return the index in - * bl_order of the last bit length code to send. - */ -local int build_bl_tree(s) - deflate_state *s; -{ - int max_blindex; /* index of last bit length code of non zero freq */ - - /* Determine the bit length frequencies for literal and distance trees */ - scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); - scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); - - /* Build the bit length tree: */ - build_tree(s, (tree_desc *)(&(s->bl_desc))); - /* opt_len now includes the length of the tree representations, except - * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. - */ - - /* Determine the number of bit length codes to send. The pkzip format - * requires that at least 4 bit length codes be sent. (appnote.txt says - * 3 but the actual value used is 4.) - */ - for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { - if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; - } - /* Update opt_len to include the bit length tree and counts */ - s->opt_len += 3*(max_blindex+1) + 5+5+4; - Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", - s->opt_len, s->static_len)); - - return max_blindex; -} - -/* =========================================================================== - * Send the header for a block using dynamic Huffman trees: the counts, the - * lengths of the bit length codes, the literal tree and the distance tree. - * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. - */ -local void send_all_trees(s, lcodes, dcodes, blcodes) - deflate_state *s; - int lcodes, dcodes, blcodes; /* number of codes for each tree */ -{ - int rank; /* index in bl_order */ - - Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); - Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, - "too many codes"); - Tracev((stderr, "\nbl counts: ")); - send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ - send_bits(s, dcodes-1, 5); - send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ - for (rank = 0; rank < blcodes; rank++) { - Tracev((stderr, "\nbl code %2d ", bl_order[rank])); - send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); - } - Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ - Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ - Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); -} - -/* =========================================================================== - * Send a stored block - */ -void _tr_stored_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ - s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; - s->compressed_len += (stored_len + 4) << 3; - - copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ -} - -/* =========================================================================== - * Send one empty static block to give enough lookahead for inflate. - * This takes 10 bits, of which 7 may remain in the bit buffer. - * The current inflate code requires 9 bits of lookahead. If the - * last two codes for the previous block (real code plus EOB) were coded - * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode - * the last real code. In this case we send two empty static blocks instead - * of one. (There are no problems if the previous block is stored or fixed.) - * To simplify the code, we assume the worst case of last real code encoded - * on one bit only. - */ -void _tr_align(s) - deflate_state *s; -{ - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); - s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ - bi_flush(s); - /* Of the 10 bits for the empty block, we have already sent - * (10 - bi_valid) bits. The lookahead for the last real code (before - * the EOB of the previous block) was thus at least one plus the length - * of the EOB plus what we have just sent of the empty static block. - */ - if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); - s->compressed_len += 10L; - bi_flush(s); - } - s->last_eob_len = 7; -} - -/* =========================================================================== - * Determine the best encoding for the current block: dynamic trees, static - * trees or store, and output the encoded block to the zip file. This function - * returns the total compressed length for the file so far. - */ -ulg _tr_flush_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block, or NULL if too old */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ - int max_blindex = 0; /* index of last bit length code of non zero freq */ - - /* Build the Huffman trees unless a stored block is forced */ - if (s->level > 0) { - - /* Check if the file is ascii or binary */ - if (s->data_type == Z_UNKNOWN) set_data_type(s); - - /* Construct the literal and distance trees */ - build_tree(s, (tree_desc *)(&(s->l_desc))); - Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - - build_tree(s, (tree_desc *)(&(s->d_desc))); - Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - /* At this point, opt_len and static_len are the total bit lengths of - * the compressed block data, excluding the tree representations. - */ - - /* Build the bit length tree for the above two trees, and get the index - * in bl_order of the last bit length code to send. - */ - max_blindex = build_bl_tree(s); - - /* Determine the best encoding. Compute first the block length in bytes*/ - opt_lenb = (s->opt_len+3+7)>>3; - static_lenb = (s->static_len+3+7)>>3; - - Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", - opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, - s->last_lit)); - - if (static_lenb <= opt_lenb) opt_lenb = static_lenb; - - } else { - Assert(buf != (char*)0, "lost buf"); - opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ - } - - /* If compression failed and this is the first and last block, - * and if the .zip file can be seeked (to rewrite the local header), - * the whole file is transformed into a stored file: - */ -#ifdef STORED_FILE_OK -# ifdef FORCE_STORED_FILE - if (eof && s->compressed_len == 0L) { /* force stored file */ -# else - if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) { -# endif - /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */ - if (buf == (charf*)0) error ("block vanished"); - - copy_block(buf, (unsigned)stored_len, 0); /* without header */ - s->compressed_len = stored_len << 3; - s->method = STORED; - } else -#endif /* STORED_FILE_OK */ - -#ifdef FORCE_STORED - if (buf != (char*)0) { /* force stored block */ -#else - if (stored_len+4 <= opt_lenb && buf != (char*)0) { - /* 4: two words for the lengths */ -#endif - /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. - * Otherwise we can't have processed more than WSIZE input bytes since - * the last block flush, because compression would have been - * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to - * transform a block into a stored block. - */ - _tr_stored_block(s, buf, stored_len, eof); - -#ifdef FORCE_STATIC - } else if (static_lenb >= 0) { /* force static trees */ -#else - } else if (static_lenb == opt_lenb) { -#endif - send_bits(s, (STATIC_TREES<<1)+eof, 3); - compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); - s->compressed_len += 3 + s->static_len; - } else { - send_bits(s, (DYN_TREES<<1)+eof, 3); - send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, - max_blindex+1); - compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); - s->compressed_len += 3 + s->opt_len; - } - Assert (s->compressed_len == s->bits_sent, "bad compressed size"); - init_block(s); - - if (eof) { - bi_windup(s); - s->compressed_len += 7; /* align on byte boundary */ - } - Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, - s->compressed_len-7*eof)); - - return s->compressed_len >> 3; -} - -/* =========================================================================== - * Save the match info and tally the frequency counts. Return true if - * the current block must be flushed. - */ -int _tr_tally (s, dist, lc) - deflate_state *s; - unsigned dist; /* distance of matched string */ - unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ -{ - s->d_buf[s->last_lit] = (ush)dist; - s->l_buf[s->last_lit++] = (uch)lc; - if (dist == 0) { - /* lc is the unmatched char */ - s->dyn_ltree[lc].Freq++; - } else { - s->matches++; - /* Here, lc is the match length - MIN_MATCH */ - dist--; /* dist = match distance - 1 */ - Assert((ush)dist < (ush)MAX_DIST(s) && - (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && - (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); - - s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++; - s->dyn_dtree[d_code(dist)].Freq++; - } - - /* Try to guess if it is profitable to stop the current block here */ - if (s->level > 2 && (s->last_lit & 0xfff) == 0) { - /* Compute an upper bound for the compressed length */ - ulg out_length = (ulg)s->last_lit*8L; - ulg in_length = (ulg)((long)s->strstart - s->block_start); - int dcode; - for (dcode = 0; dcode < D_CODES; dcode++) { - out_length += (ulg)s->dyn_dtree[dcode].Freq * - (5L+extra_dbits[dcode]); - } - out_length >>= 3; - Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", - s->last_lit, in_length, out_length, - 100L - out_length*100L/in_length)); - if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; - } - return (s->last_lit == s->lit_bufsize-1); - /* We avoid equality with lit_bufsize because of wraparound at 64K - * on 16 bit machines and because stored blocks are restricted to - * 64K-1 bytes. - */ -} - -/* =========================================================================== - * Send the block data compressed using the given Huffman trees - */ -local void compress_block(s, ltree, dtree) - deflate_state *s; - ct_data *ltree; /* literal tree */ - ct_data *dtree; /* distance tree */ -{ - unsigned dist; /* distance of matched string */ - int lc; /* match length or unmatched char (if dist == 0) */ - unsigned lx = 0; /* running index in l_buf */ - unsigned code; /* the code to send */ - int extra; /* number of extra bits to send */ - - if (s->last_lit != 0) do { - dist = s->d_buf[lx]; - lc = s->l_buf[lx++]; - if (dist == 0) { - send_code(s, lc, ltree); /* send a literal byte */ - Tracecv(isgraph(lc), (stderr," '%c' ", lc)); - } else { - /* Here, lc is the match length - MIN_MATCH */ - code = length_code[lc]; - send_code(s, code+LITERALS+1, ltree); /* send the length code */ - extra = extra_lbits[code]; - if (extra != 0) { - lc -= base_length[code]; - send_bits(s, lc, extra); /* send the extra length bits */ - } - dist--; /* dist is now the match distance - 1 */ - code = d_code(dist); - Assert (code < D_CODES, "bad d_code"); - - send_code(s, code, dtree); /* send the distance code */ - extra = extra_dbits[code]; - if (extra != 0) { - dist -= base_dist[code]; - send_bits(s, dist, extra); /* send the extra distance bits */ - } - } /* literal or match pair ? */ - - /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ - Assert((uInt)s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow"); - - } while (lx < s->last_lit); - - send_code(s, END_BLOCK, ltree); - s->last_eob_len = ltree[END_BLOCK].Len; -} - -/* =========================================================================== - * Set the data type to ASCII or BINARY, using a crude approximation: - * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise. - * IN assertion: the fields freq of dyn_ltree are set and the total of all - * frequencies does not exceed 64K (to fit in an int on 16 bit machines). - */ -local void set_data_type(s) - deflate_state *s; -{ - int n = 0; - unsigned ascii_freq = 0; - unsigned bin_freq = 0; - while (n < 7) bin_freq += s->dyn_ltree[n++].Freq; - while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq; - while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq; - s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII); -} - -/* =========================================================================== - * Reverse the first len bits of a code, using straightforward code (a faster - * method would use a table) - * IN assertion: 1 <= len <= 15 - */ -local unsigned bi_reverse(code, len) - unsigned code; /* the value to invert */ - int len; /* its bit length */ -{ - register unsigned res = 0; - do { - res |= code & 1; - code >>= 1, res <<= 1; - } while (--len > 0); - return res >> 1; -} - -/* =========================================================================== - * Flush the bit buffer, keeping at most 7 bits in it. - */ -local void bi_flush(s) - deflate_state *s; -{ - if (s->bi_valid == 16) { - put_short(s, s->bi_buf); - s->bi_buf = 0; - s->bi_valid = 0; - } else if (s->bi_valid >= 8) { - put_byte(s, (Byte)s->bi_buf); - s->bi_buf >>= 8; - s->bi_valid -= 8; - } -} - -/* =========================================================================== - * Flush the bit buffer and align the output on a byte boundary - */ -local void bi_windup(s) - deflate_state *s; -{ - if (s->bi_valid > 8) { - put_short(s, s->bi_buf); - } else if (s->bi_valid > 0) { - put_byte(s, (Byte)s->bi_buf); - } - s->bi_buf = 0; - s->bi_valid = 0; -#ifdef DEBUG - s->bits_sent = (s->bits_sent+7) & ~7; -#endif -} - -/* =========================================================================== - * Copy a stored block, storing first the length and its - * one's complement if requested. - */ -local void copy_block(s, buf, len, header) - deflate_state *s; - charf *buf; /* the input data */ - unsigned len; /* its length */ - int header; /* true if block header must be written */ -{ - bi_windup(s); /* align on byte boundary */ - s->last_eob_len = 8; /* enough lookahead for inflate */ - - if (header) { - put_short(s, (ush)len); - put_short(s, (ush)~len); -#ifdef DEBUG - s->bits_sent += 2*16; -#endif - } -#ifdef DEBUG - s->bits_sent += (ulg)len<<3; -#endif - while (len--) { - put_byte(s, *buf++); - } -} diff --git a/security/nss/cmd/zlib/uncompr.c b/security/nss/cmd/zlib/uncompr.c deleted file mode 100644 index 5e5a83247..000000000 --- a/security/nss/cmd/zlib/uncompr.c +++ /dev/null @@ -1,58 +0,0 @@ -/* uncompr.c -- decompress a memory buffer - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* $Id$ */ - -#include "zlib.h" - -/* =========================================================================== - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -*/ -PR_PUBLIC_API(int) uncompress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; -{ - z_stream stream; - int err; - - stream.next_in = (Bytef*)source; - stream.avail_in = (uInt)sourceLen; - /* Check for source > 64K on 16-bit machine: */ - if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; - - stream.next_out = dest; - stream.avail_out = (uInt)*destLen; - if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - - err = inflateInit(&stream); - if (err != Z_OK) return err; - - err = inflate(&stream, Z_FINISH); - if (err != Z_STREAM_END) { - inflateEnd(&stream); - return err; - } - *destLen = stream.total_out; - - err = inflateEnd(&stream); - return err; -} diff --git a/security/nss/cmd/zlib/zconf.h b/security/nss/cmd/zlib/zconf.h deleted file mode 100644 index 096a448b4..000000000 --- a/security/nss/cmd/zlib/zconf.h +++ /dev/null @@ -1,190 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* $Id$ */ - -#ifndef _ZCONF_H -#define _ZCONF_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - */ -#ifdef Z_PREFIX -# define deflateInit_ z_deflateInit_ -# define deflate z_deflate -# define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ -# define inflate z_inflate -# define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateSetDictionary z_deflateSetDictionary -# define deflateCopy z_deflateCopy -# define deflateReset z_deflateReset -# define deflateParams z_deflateParams -# define inflateInit2_ z_inflateInit2_ -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateReset z_inflateReset -# define compress z_compress -# define uncompress z_uncompress -# define adler32 z_adler32 -# define crc32 z_crc32 -# define get_crc_table z_get_crc_table - -# define Byte z_Byte -# define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf -# define intf z_intf -# define uIntf z_uIntf -# define uLongf z_uLongf -# define voidpf z_voidpf -# define voidp z_voidp -#endif - -#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) -# define WIN32 -#endif -#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386) -# ifndef __32BIT__ -# define __32BIT__ -# endif -#endif -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#if defined(MSDOS) && !defined(__32BIT__) -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32) || defined(XP_OS2)) && !defined(STDC) -# define STDC -#endif -#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC) -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const -# endif -#endif - -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__) -# define NO_DUMMY_DECL -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - 1 << (windowBits+2) + 1 << (memLevel+9) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR __far -# else -# define FAR far -# endif -#endif -#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) -# ifndef __32BIT__ -# define SMALL_MEDIUM -# define FAR __far -# endif -#endif -#ifndef FAR -# define FAR -#endif - -typedef unsigned char Byte; /* 8 bits */ -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#if defined(__BORLANDC__) && defined(SMALL_MEDIUM) - /* Borland C/C++ ignores FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#ifdef MOZILLA_CLIENT -#include "prtypes.h" -#else -/* Compile with -DZLIB_DLL for Windows DLL support */ -#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL) -# include <windows.h> -# define EXPORT WINAPI -#else -# define EXPORT -#endif - -/* #define PR_PUBLIC_API(type) type */ - -#endif /* MOZILLA_CLIENT */ - -#endif /* _ZCONF_H */ diff --git a/security/nss/cmd/zlib/zip16.def b/security/nss/cmd/zlib/zip16.def deleted file mode 100644 index 664eeab09..000000000 --- a/security/nss/cmd/zlib/zip16.def +++ /dev/null @@ -1,24 +0,0 @@ -LIBRARY zip1640.DLL -EXETYPE WINDOWS -PROTMODE - -DESCRIPTION '16-bit Zip DLL' - -STUB 'WINSTUB.EXE' - -CODE LOADONCALL MOVEABLE DISCARDABLE -DATA PRELOAD MOVEABLE SINGLE - -HEAPSIZE 8192 - -EXPORTS - -IMPORTS - _malloc = nspr3.2 - _realloc = nspr3.3 - _calloc = nspr3.4 - _free = nspr3.5 - _getenv = nspr3.9 - _printf = nspr3.11 - _sscanf = nspr3.33 - diff --git a/security/nss/cmd/zlib/zip_nodl.c b/security/nss/cmd/zlib/zip_nodl.c deleted file mode 100644 index e8ea67d7e..000000000 --- a/security/nss/cmd/zlib/zip_nodl.c +++ /dev/null @@ -1,50 +0,0 @@ -/* Automatically generated file; do not edit */ - -#include "prtypes.h" - -#include "prlink.h" - -extern void Java_java_util_zip_Adler32_update_stub(); -extern void Java_java_util_zip_Adler32_update1_stub(); -extern void Java_java_util_zip_CRC32_update_stub(); -extern void Java_java_util_zip_CRC32_update1_stub(); -extern void Java_java_util_zip_Deflater_setDictionary_stub(); -extern void Java_java_util_zip_Deflater_deflate_stub(); -extern void Java_java_util_zip_Deflater_getAdler_stub(); -extern void Java_java_util_zip_Deflater_getTotalIn_stub(); -extern void Java_java_util_zip_Deflater_getTotalOut_stub(); -extern void Java_java_util_zip_Deflater_reset_stub(); -extern void Java_java_util_zip_Deflater_end_stub(); -extern void Java_java_util_zip_Deflater_init_stub(); -extern void Java_java_util_zip_Inflater_setDictionary_stub(); -extern void Java_java_util_zip_Inflater_inflate_stub(); -extern void Java_java_util_zip_Inflater_getAdler_stub(); -extern void Java_java_util_zip_Inflater_getTotalIn_stub(); -extern void Java_java_util_zip_Inflater_getTotalOut_stub(); -extern void Java_java_util_zip_Inflater_reset_stub(); -extern void Java_java_util_zip_Inflater_end_stub(); -extern void Java_java_util_zip_Inflater_init_stub(); - -PRStaticLinkTable zip_nodl_tab[] = { - { "Java_java_util_zip_Adler32_update_stub", Java_java_util_zip_Adler32_update_stub }, - { "Java_java_util_zip_Adler32_update1_stub", Java_java_util_zip_Adler32_update1_stub }, - { "Java_java_util_zip_CRC32_update_stub", Java_java_util_zip_CRC32_update_stub }, - { "Java_java_util_zip_CRC32_update1_stub", Java_java_util_zip_CRC32_update1_stub }, - { "Java_java_util_zip_Deflater_setDictionary_stub", Java_java_util_zip_Deflater_setDictionary_stub }, - { "Java_java_util_zip_Deflater_deflate_stub", Java_java_util_zip_Deflater_deflate_stub }, - { "Java_java_util_zip_Deflater_getAdler_stub", Java_java_util_zip_Deflater_getAdler_stub }, - { "Java_java_util_zip_Deflater_getTotalIn_stub", Java_java_util_zip_Deflater_getTotalIn_stub }, - { "Java_java_util_zip_Deflater_getTotalOut_stub", Java_java_util_zip_Deflater_getTotalOut_stub }, - { "Java_java_util_zip_Deflater_reset_stub", Java_java_util_zip_Deflater_reset_stub }, - { "Java_java_util_zip_Deflater_end_stub", Java_java_util_zip_Deflater_end_stub }, - { "Java_java_util_zip_Deflater_init_stub", Java_java_util_zip_Deflater_init_stub }, - { "Java_java_util_zip_Inflater_setDictionary_stub", Java_java_util_zip_Inflater_setDictionary_stub }, - { "Java_java_util_zip_Inflater_inflate_stub", Java_java_util_zip_Inflater_inflate_stub }, - { "Java_java_util_zip_Inflater_getAdler_stub", Java_java_util_zip_Inflater_getAdler_stub }, - { "Java_java_util_zip_Inflater_getTotalIn_stub", Java_java_util_zip_Inflater_getTotalIn_stub }, - { "Java_java_util_zip_Inflater_getTotalOut_stub", Java_java_util_zip_Inflater_getTotalOut_stub }, - { "Java_java_util_zip_Inflater_reset_stub", Java_java_util_zip_Inflater_reset_stub }, - { "Java_java_util_zip_Inflater_end_stub", Java_java_util_zip_Inflater_end_stub }, - { "Java_java_util_zip_Inflater_init_stub", Java_java_util_zip_Inflater_init_stub }, - { 0, 0, }, -}; diff --git a/security/nss/cmd/zlib/zlib.h b/security/nss/cmd/zlib/zlib.h deleted file mode 100644 index b216f00a3..000000000 --- a/security/nss/cmd/zlib/zlib.h +++ /dev/null @@ -1,892 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.0.4, Jul 24th, 1996. - - Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - gzip@prep.ai.mit.edu madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ -/* This file was modified since it was taken from the zlib distribution */ - -#ifndef _ZLIB_H -#define _ZLIB_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include "zconf.h" - -#define ZLIB_VERSION "1.0.4" - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms may be added later and will have the same - stream interface. - - For compression the application must provide the output buffer and - may optionally provide the input buffer for optimization. For decompression, - the application must provide the input buffer and may optionally provide - the output buffer for optimization. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. - - The library does not install any signal handler. It is recommended to - add at least a handler for SIGSEGV when decompressing; the library checks - the consistency of the input data whenever possible but may go nuts - for some forms of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: ascii or binary */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -/* Allowed flush values; see deflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative - * values are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_ASCII 1 -#define Z_UNKNOWN 2 -/* Possible values of the data_type field */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - /* basic functions */ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern const char *) zlibVersion (void); -#else -extern const char * EXPORT zlibVersion OF((void)); -#endif -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. - */ - -/* -extern int EXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at - all (the input data is simply copied a block at a time). - Z_DEFAULT_COMPRESSION requests a default compromise between speed and - compression (currently equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level, - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -*/ - - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflate (z_streamp strm, int flush); -#else -extern int EXPORT deflate OF((z_streamp strm, int flush)); -#endif -/* - Performs one or both of the following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK - and with zero avail_out, it must be called again after making room in the - output buffer because there might be more output pending. - - If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression - block is terminated and flushed to the output buffer so that the - decompressor can get all input data available so far. For method 9, a future - variant on method 8, the current block will be flushed but not terminated. - Z_SYNC_FLUSH has the same effect as partial flush except that the compressed - output is byte aligned (the compressor can clear its internal bit buffer) - and the current block is always terminated; this can be useful if the - compressor has to be restarted from scratch after an interruption (in which - case the internal state of the compressor may be lost). - If flush is set to Z_FULL_FLUSH, the compression block is terminated, a - special marker is output and the compression dictionary is discarded; this - is useful to allow the decompressor to synchronize if one compressed block - has been damaged (see inflateSync below). Flushing degrades compression and - so should be used only when necessary. Using Z_FULL_FLUSH too often can - seriously degrade the compression. If deflate returns with avail_out == 0, - this function must be called again with the same value of the flush - parameter and more output space (updated avail_out), until the flush is - complete (deflate returns with non-zero avail_out). - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - 0.1% larger than avail_in plus 12 bytes. If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. -*/ - - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflateEnd (z_streamp strm); -#else -extern int EXPORT deflateEnd OF((z_streamp strm)); -#endif -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, - msg may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -extern int EXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - zalloc, zfree and opaque must be initialized before by the caller. If - zalloc and zfree are set to Z_NULL, inflateInit updates them to use default - allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_VERSION_ERROR if the zlib library version is incompatible - with the version assumed by the caller. msg is set to null if there is no - error message. inflateInit does not perform any decompression: this will be - done by inflate(). -*/ - - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) inflate (z_streamp strm, int flush); -#else -extern int EXPORT inflate OF((z_streamp strm, int flush)); -#endif -/* - Performs one or both of the following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there - is no more input data or no more space in the output buffer (see below - about the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. - - If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much - output as possible to the output buffer. The flushing behavior of inflate is - not specified for values of the flush parameter other than Z_PARTIAL_FLUSH - and Z_FINISH, but the current implementation actually flushes as much output - as possible anyway. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine - may be used for the single inflate() call. - - inflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if the end of the - compressed data has been reached and all uncompressed output has been - produced, Z_NEED_DICT if a preset dictionary is needed at this point (see - inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted, - Z_STREAM_ERROR if the stream structure was inconsistent (for example if - next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in - the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the - application may then call inflateSync to look for a good compression block. - In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the - dictionary chosen by the compressor. -*/ - - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) inflateEnd (z_streamp strm); -#else -extern int EXPORT inflateEnd OF((z_streamp strm)); -#endif -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -extern int EXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by - the caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. (Method 9 will allow a 64K history buffer and - partial block flushes.) - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library (the value 16 will be allowed for method 9). Larger - values of this parameter result in better compression at the expense of - memory usage. The default value is 15 if deflateInit is used instead. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match). Filtered data consists mostly of small values with a - somewhat random distribution. In this case, the compression algorithm is - tuned to compress them better. The effect of Z_FILTERED is to force more - Huffman coding and less string matching; it is somewhat intermediate - between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects - the compression ratio but not the correctness of the compressed output even - if it is not set appropriately. - - If next_in is not null, the library will use this buffer to hold also - some history information; the buffer must either hold the entire input - data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in - is null, the library will allocate its own history buffer (and leave next_in - null). next_out need not be provided here but must be provided by the - application for the next call of deflate(). - - If the history buffer is provided by the application, next_in must - must never be changed by the application since the compressor maintains - information inside this buffer from call to call; the application - must provide more input only by increasing avail_in. next_in is always - reset by the library in this case. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was - not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as - an invalid method). msg is set to null if there is no error message. - deflateInit2 does not perform any compression: this will be done by - deflate(). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflateSetDictionary (z_streamp strm, - const Bytef *dictionary, - uInt dictLength); -#else -extern int EXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -#endif -/* - Initializes the compression dictionary (history buffer) from the given - byte sequence without producing any compressed output. This function must - be called immediately after deflateInit or deflateInit2, before any call - of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and - can be predicted with good accuracy; the data can then be compressed better - than with the default empty dictionary. In this version of the library, - only the last 32K bytes of the dictionary are used. - Upon return of this function, strm->adler is set to the Adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The Adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state - is inconsistent (for example if deflate has already been called for this - stream). deflateSetDictionary does not perform any compression: this will - be done by deflate(). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflateCopy (z_streamp dest, z_streamp source); -#else -extern int EXPORT deflateCopy OF((z_streamp dest, z_streamp source)); -#endif -/* - Sets the destination stream as a complete copy of the source stream. If - the source stream is using an application-supplied history buffer, a new - buffer is allocated for the destination stream. The compressed output - buffer is always application-supplied. It's the responsibility of the - application to provide the correct values of next_out and avail_out for the - next call of deflate. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflateReset (z_streamp strm); -#else -extern int EXPORT deflateReset OF((z_streamp strm)); -#endif -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflateParams (z_streamp strm, int level, int strategy); -#else -extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy)); -#endif -/* - Dynamically update the compression level and compression strategy. - This can be used to switch between compression and straight copy of - the input data, or to switch to a different kind of input data requiring - a different strategy. If the compression level is changed, the input - available so far is compressed with the old level (and may be flushed); - the new level will take effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero. -*/ - -/* -extern int EXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with more compression options. The - fields next_out, zalloc, zfree and opaque must be initialized before by - the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library (the value 16 will be allowed soon). The - default value is 15 if inflateInit is used instead. If a compressed stream - with a larger window size is given as input, inflate() will return with - the error code Z_DATA_ERROR instead of trying to allocate a larger window. - - If next_out is not null, the library will use this buffer for the history - buffer; the buffer must either be large enough to hold the entire output - data, or have at least 1<<windowBits bytes. If next_out is null, the - library will allocate its own buffer (and leave next_out null). next_in - need not be provided here but must be provided by the application for the - next call of inflate(). - - If the history buffer is provided by the application, next_out must - never be changed by the application since the decompressor maintains - history information inside this buffer from call to call; the application - can only reset next_out to the beginning of the history buffer when - avail_out is zero and all output has been consumed. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was - not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as - windowBits < 8). msg is set to null if there is no error message. - inflateInit2 does not perform any decompression: this will be done by - inflate(). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) inflateSetDictionary (z_streamp strm, - const Bytef *dictionary, - uInt dictLength); -#else -extern int EXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -#endif -/* - Initializes the decompression dictionary (history buffer) from the given - uncompressed byte sequence. This function must be called immediately after - a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen - by the compressor can be determined from the Adler32 value returned by this - call of inflate. The compressor and decompressor must use exactly the same - dictionary (see deflateSetDictionary). - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect Adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) inflateSync (z_streamp strm); -#else -extern int EXPORT inflateSync OF((z_streamp strm)); -#endif -/* - Skips invalid compressed data until the special marker (see deflate() - above) can be found, or until all available input is skipped. No output - is provided. - - inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no marker has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) inflateReset (z_streamp strm); -#else -extern int EXPORT inflateReset OF((z_streamp strm)); -#endif -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - - - /* utility functions */ - -/* - The following utility functions are implemented on top of the - basic stream-oriented functions. To simplify the interface, some - default options are assumed (compression level, window size, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) compress (Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen); -#else -extern int EXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -#endif -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least 0.1% larger than - sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) uncompress (Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen); -#else -extern int EXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -#endif -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -*/ - - -typedef voidp gzFile; - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern gzFile) gzopen (const char *path, const char *mode); -#else -extern gzFile EXPORT gzopen OF((const char *path, const char *mode)); -#endif -/* - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level - ("wb9"). gzopen can be used to read a file which is not in gzip format; - in this case gzread will directly read from the file without decompression. - gzopen returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern gzFile) gzdopen (int fd, const char *mode); -#else -extern gzFile EXPORT gzdopen OF((int fd, const char *mode)); -#endif -/* - gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or - fileno (in the file has been previously opened with fopen). - The mode parameter is as in gzopen. - The next call of gzclose on the returned gzFile will also close the - file descriptor fd, just like fclose(fdopen(fd), mode) closes the file - descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). - gzdopen returns NULL if there was insufficient memory to allocate - the (de)compression state. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzread (gzFile file, voidp buf, unsigned len); -#else -extern int EXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -#endif -/* - Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number - of bytes into the buffer. - gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). */ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzwrite (gzFile file, const voidp buf, unsigned len); -#else -extern int EXPORT gzwrite OF((gzFile file, const voidp buf, unsigned len)); -#endif -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes actually written - (0 in case of error). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzflush (gzFile file, int flush); -#else -extern int EXPORT gzflush OF((gzFile file, int flush)); -#endif -/* - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib - error number (see function gzerror below). gzflush returns Z_OK if - the flush parameter is Z_FINISH and all output could be flushed. - gzflush should be called only when strictly necessary because it can - degrade compression. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) gzclose (gzFile file); -#else -extern int EXPORT gzclose OF((gzFile file)); -#endif -/* - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern const char *) gzerror (gzFile file, int *errnum); -#else -extern const char * EXPORT gzerror OF((gzFile file, int *errnum)); -#endif -/* - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the - compression library. -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern uLong) adler32 (uLong adler, const Bytef *buf, uInt len); -#else -extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -#endif - -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern uLong) crc32 (uLong crc, const Bytef *buf, uInt len); -#else -extern uLong EXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -#endif -/* - Update a running crc with the bytes buf[0..len-1] and return the updated - crc. If buf is NULL, this function returns the required initial value - for the crc. Pre- and post-conditioning (one's complement) is performed - within this function so it shouldn't be done by the application. - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -#ifdef MOZILLA_CLIENT -PR_PUBLIC_API(extern int) deflateInit_ (z_streamp strm, int level, const char *version, - int stream_size); -PR_PUBLIC_API(extern int) inflateInit_ (z_streamp strm, const char *version, - int stream_size); -PR_PUBLIC_API(extern int) deflateInit2_ (z_streamp strm, int level, int method, - int windowBits, int memLevel, int strategy, - const char *version, int stream_size); -PR_PUBLIC_API(extern int) inflateInit2_ (z_streamp strm, int windowBits, - const char *version, int stream_size); -#else -extern int EXPORT deflateInit_ OF((z_streamp strm, int level, const char *version, - int stream_size)); -extern int EXPORT inflateInit_ OF((z_streamp strm, const char *version, - int stream_size)); -extern int EXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, int strategy, - const char *version, int stream_size)); -extern int EXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -#endif /* MOZILLA_CLIENT */ - - -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) - -#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; /* hack for buggy compilers */ -#endif - -uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */ - -#ifdef __cplusplus -} -#endif - -#endif /* _ZLIB_H */ diff --git a/security/nss/cmd/zlib/zutil.c b/security/nss/cmd/zlib/zutil.c deleted file mode 100644 index afca3ed0c..000000000 --- a/security/nss/cmd/zlib/zutil.c +++ /dev/null @@ -1,215 +0,0 @@ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* $Id$ */ - -#include <stdio.h> - -#include "zutil.h" - -#ifdef MOZILLA_CLIENT -#include "prtypes.h" -#include "prlog.h" -#endif - -struct internal_state {int dummy;}; /* for buggy compilers */ - -#ifndef STDC -extern void exit OF((int)); -#endif - -const char *z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - - -PR_PUBLIC_API(const char *) zlibVersion() -{ - return ZLIB_VERSION; -} - -#if defined(DEBUG) && defined(MOZILLA_CLIENT) -void z_error (m) - char *m; -{ - PR_ASSERT(0); -} -#endif - -#ifndef HAVE_MEMCPY - -void zmemcpy(dest, source, len) - Bytef* dest; - Bytef* source; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = *source++; /* ??? to be unrolled */ - } while (--len != 0); -} - -int zmemcmp(s1, s2, len) - Bytef* s1; - Bytef* s2; - uInt len; -{ - uInt j; - - for (j = 0; j < len; j++) { - if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; - } - return 0; -} - -void zmemzero(dest, len) - Bytef* dest; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = 0; /* ??? to be unrolled */ - } while (--len != 0); -} -#endif - -#ifdef __TURBOC__ -#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__) -/* Small and medium model in Turbo C are for now limited to near allocation - * with reduced MAX_WBITS and MAX_MEM_LEVEL - */ -# define MY_ZCALLOC - -/* Turbo C malloc() does not allow dynamic allocation of 64K bytes - * and farmalloc(64K) returns a pointer with an offset of 8, so we - * must fix the pointer. Warning: the pointer must be put back to its - * original form in order to free it, use zcfree(). - */ - -#define MAX_PTR 10 -/* 10*64K = 640K */ - -local int next_ptr = 0; - -typedef struct ptr_table_s { - voidpf org_ptr; - voidpf new_ptr; -} ptr_table; - -local ptr_table table[MAX_PTR]; -/* This table is used to remember the original form of pointers - * to large buffers (64K). Such pointers are normalized with a zero offset. - * Since MSDOS is not a preemptive multitasking OS, this table is not - * protected from concurrent access. This hack doesn't work anyway on - * a protected system like OS/2. Use Microsoft C instead. - */ - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - voidpf buf = opaque; /* just to make some compilers happy */ - ulg bsize = (ulg)items*size; - - /* If we allocate less than 65520 bytes, we assume that farmalloc - * will return a usable pointer which doesn't have to be normalized. - */ - if (bsize < 65520L) { - buf = farmalloc(bsize); - if (*(ush*)&buf != 0) return buf; - } else { - buf = farmalloc(bsize + 16L); - } - if (buf == NULL || next_ptr >= MAX_PTR) return NULL; - table[next_ptr].org_ptr = buf; - - /* Normalize the pointer to seg:0 */ - *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; - *(ush*)&buf = 0; - table[next_ptr++].new_ptr = buf; - return buf; -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - int n; - if (*(ush*)&ptr != 0) { /* object < 64K */ - farfree(ptr); - return; - } - /* Find the original pointer */ - for (n = 0; n < next_ptr; n++) { - if (ptr != table[n].new_ptr) continue; - - farfree(table[n].org_ptr); - while (++n < next_ptr) { - table[n-1] = table[n]; - } - next_ptr--; - return; - } - ptr = opaque; /* just to make some compilers happy */ - Assert(0, "zcfree: ptr not found"); -} -#endif -#endif /* __TURBOC__ */ - - -#if defined(M_I86) && !defined(__32BIT__) -/* Microsoft C in 16-bit mode */ - -# define MY_ZCALLOC - -#if (!defined(_MSC_VER) || (_MSC_VER < 600)) -# define _halloc halloc -# define _hfree hfree -#endif - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - return _halloc((long)items, size); -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - _hfree(ptr); -} - -#endif /* MSC */ - - -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) items += size - size; /* make compiler happy */ - return (voidpf)calloc(items, size); -} - -void zcfree (opaque, ptr) - voidpf opaque; - voidpf ptr; -{ - free(ptr); - if (opaque) return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ diff --git a/security/nss/cmd/zlib/zutil.h b/security/nss/cmd/zlib/zutil.h deleted file mode 100644 index 12a59356c..000000000 --- a/security/nss/cmd/zlib/zutil.h +++ /dev/null @@ -1,210 +0,0 @@ -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ -/* This file was modified since it was taken from the zlib distribution */ -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* $Id$ */ - -#ifndef _Z_UTIL_H -#define _Z_UTIL_H - -#include "zlib.h" - -#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS) -# include <stddef.h> -# include <errno.h> -#else - extern int errno; -#endif -#ifdef STDC -# include <string.h> -# include <stdlib.h> -#endif - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ -/* (size given to avoid silly warnings with Visual C++) */ - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - - /* common constants */ - -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - -#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - - /* target dependencies */ - -#ifdef MSDOS -# define OS_CODE 0x00 -# ifdef __TURBOC__ -# include <alloc.h> -# else /* MSC or DJGPP */ -# include <malloc.h> -# endif -#endif - -#ifdef OS2 -# define OS_CODE 0x06 -#endif - -#ifdef WIN32 /* Window 95 & Windows NT */ -# define OS_CODE 0x0b -#endif - -#if defined(VAXC) || defined(VMS) -# define OS_CODE 0x02 -# define FOPEN(name, mode) \ - fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") -#endif - -#ifdef AMIGA -# define OS_CODE 0x01 -#endif - -#if defined(ATARI) || defined(atarist) -# define OS_CODE 0x05 -#endif - -#ifdef MACOS -# define OS_CODE 0x07 -#endif - -#ifdef __50SERIES /* Prime/PRIMOS */ -# define OS_CODE 0x0F -#endif - -#ifdef TOPS20 -# define OS_CODE 0x0a -#endif - -#if defined(_BEOS_) || defined(RISCOS) -# define fdopen(fd,mode) NULL /* No fdopen() */ -#endif - - /* Common defaults */ - -#ifndef OS_CODE -# define OS_CODE 0x03 /* assume Unix */ -#endif - -#ifndef FOPEN -# define FOPEN(name, mode) fopen((name), (mode)) -#endif - - /* functions */ - -#ifdef HAVE_STRERROR -#ifndef MOZILLA_CLIENT - extern char *strerror OF((int)); -#endif -# define zstrerror(errnum) strerror(errnum) -#else -# define zstrerror(errnum) "" -#endif - -#if defined(pyr) -# define NO_MEMCPY -#endif -#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER) - /* Use our own functions for small and medium model with MSC <= 5.0. - * You may have to use the same strategy for Borland C (untested). - */ -# define NO_MEMCPY -#endif -#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) -# define HAVE_MEMCPY -#endif -#ifdef HAVE_MEMCPY -# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ -# define zmemcpy _fmemcpy -# define zmemcmp _fmemcmp -# define zmemzero(dest, len) _fmemset(dest, 0, len) -# else -# define zmemcpy memcpy -# define zmemcmp memcmp -# define zmemzero(dest, len) memset(dest, 0, len) -# endif -#else - extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len)); - extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len)); - extern void zmemzero OF((Bytef* dest, uInt len)); -#endif - -/* Diagnostic functions */ -#ifdef DEBUG_ZLIB -# include <stdio.h> -# ifndef verbose -# define verbose 0 -# endif - extern void z_error OF((char *m)); -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# include <stdio.h> -# ifndef verbose -# define verbose 0 -# endif - extern void z_error OF((char *m)); -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - - -typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len)); - -voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); -void zcfree OF((voidpf opaque, voidpf ptr)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - -#endif /* _Z_UTIL_H */ |