diff options
Diffstat (limited to 'security/nss/lib/cryptohi/keyhi.h')
-rw-r--r-- | security/nss/lib/cryptohi/keyhi.h | 311 |
1 files changed, 0 insertions, 311 deletions
diff --git a/security/nss/lib/cryptohi/keyhi.h b/security/nss/lib/cryptohi/keyhi.h deleted file mode 100644 index 350b88d0f..000000000 --- a/security/nss/lib/cryptohi/keyhi.h +++ /dev/null @@ -1,311 +0,0 @@ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1994-2000 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * Dr Stephen Henson <stephen.henson@gemplus.com> - * Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ -/* $Id$ */ - -#ifndef _KEYHI_H_ -#define _KEYHI_H_ - -#include "plarena.h" - -#include "seccomon.h" -#include "secoidt.h" -#include "secdert.h" -#include "keythi.h" -#include "certt.h" -/*#include "secpkcs5.h" */ - -SEC_BEGIN_PROTOS - - -/* -** Destroy a subject-public-key-info object. -*/ -extern void SECKEY_DestroySubjectPublicKeyInfo(CERTSubjectPublicKeyInfo *spki); - -/* -** Copy subject-public-key-info "src" to "dst". "dst" is filled in -** appropriately (memory is allocated for each of the sub objects). -*/ -extern SECStatus SECKEY_CopySubjectPublicKeyInfo(PRArenaPool *arena, - CERTSubjectPublicKeyInfo *dst, - CERTSubjectPublicKeyInfo *src); - -/* -** Update the PQG parameters for a cert's public key. -** Only done for DSA and Fortezza certs -*/ -extern SECStatus -SECKEY_UpdateCertPQG(CERTCertificate * subjectCert); - - -/* Compare the KEA parameters of two public keys. - * Only used by fortezza. */ - -extern SECStatus -SECKEY_KEAParamCompare(CERTCertificate *cert1,CERTCertificate *cert2); - -/* -** Return the strength of the public key in bytes -*/ -extern unsigned SECKEY_PublicKeyStrength(SECKEYPublicKey *pubk); - -/* -** Return the strength of the public key in bits -*/ -extern unsigned SECKEY_PublicKeyStrengthInBits(SECKEYPublicKey *pubk); - -/* -** Return the length of the signature in bytes -*/ -extern unsigned SECKEY_SignatureLen(const SECKEYPublicKey *pubk); - -/* -** Make a copy of the private key "privKey" -*/ -extern SECKEYPrivateKey *SECKEY_CopyPrivateKey(SECKEYPrivateKey *privKey); - -/* -** Make a copy of the public key "pubKey" -*/ -extern SECKEYPublicKey *SECKEY_CopyPublicKey(SECKEYPublicKey *pubKey); - -/* -** Convert a private key "privateKey" into a public key -*/ -extern SECKEYPublicKey *SECKEY_ConvertToPublicKey(SECKEYPrivateKey *privateKey); - -/* - * create a new RSA key pair. The private Key is returned... - */ -SECKEYPrivateKey *SECKEY_CreateRSAPrivateKey(int keySizeInBits, - SECKEYPublicKey **pubk, void *cx); - -/* - * create a new DH key pair. The private Key is returned... - */ -SECKEYPrivateKey *SECKEY_CreateDHPrivateKey(SECKEYDHParams *param, - SECKEYPublicKey **pubk, void *cx); - -/* - * create a new EC key pair. The private Key is returned... - */ -SECKEYPrivateKey *SECKEY_CreateECPrivateKey(SECKEYECParams *param, - SECKEYPublicKey **pubk, void *cx); - -/* -** Create a subject-public-key-info based on a public key. -*/ -extern CERTSubjectPublicKeyInfo * -SECKEY_CreateSubjectPublicKeyInfo(SECKEYPublicKey *k); - -/* -** Decode a DER encoded public key into an SECKEYPublicKey structure. -*/ -extern SECKEYPublicKey *SECKEY_DecodeDERPublicKey(SECItem *pubkder); - -/* -** Convert a base64 ascii encoded DER public key to our internal format. -*/ -extern SECKEYPublicKey *SECKEY_ConvertAndDecodePublicKey(char *pubkstr); - -/* -** Convert a base64 ascii encoded DER public key and challenge to spki, -** and verify the signature and challenge data are correct -*/ -extern CERTSubjectPublicKeyInfo * -SECKEY_ConvertAndDecodePublicKeyAndChallenge(char *pkacstr, char *challenge, - void *cx); - -/* -** Encode a CERTSubjectPublicKeyInfo structure. into a -** DER encoded subject public key info. -*/ -SECItem * -SECKEY_EncodeDERSubjectPublicKeyInfo(SECKEYPublicKey *pubk); - -/* -** Decode a DER encoded subject public key info into a -** CERTSubjectPublicKeyInfo structure. -*/ -extern CERTSubjectPublicKeyInfo * -SECKEY_DecodeDERSubjectPublicKeyInfo(SECItem *spkider); - -/* -** Convert a base64 ascii encoded DER subject public key info to our -** internal format. -*/ -extern CERTSubjectPublicKeyInfo * -SECKEY_ConvertAndDecodeSubjectPublicKeyInfo(char *spkistr); - -/* - * extract the public key from a subject Public Key info structure. - * (used by JSS). - */ -extern SECKEYPublicKey * -SECKEY_ExtractPublicKey(CERTSubjectPublicKeyInfo *); - -/* -** Destroy a private key object. -** "key" the object -*/ -extern void SECKEY_DestroyPrivateKey(SECKEYPrivateKey *key); - - -/* -** Destroy a public key object. -** "key" the object -*/ -extern void SECKEY_DestroyPublicKey(SECKEYPublicKey *key); - -/* Destroy and zero out a private key info structure. for now this - * function zero's out memory allocated in an arena for the key - * since PORT_FreeArena does not currently do this. - * - * NOTE -- If a private key info is allocated in an arena, one should - * not call this function with freeit = PR_FALSE. The function should - * destroy the arena. - */ -extern void -SECKEY_DestroyPrivateKeyInfo(SECKEYPrivateKeyInfo *pvk, PRBool freeit); - -/* Destroy and zero out an encrypted private key info. - * - * NOTE -- If a encrypted private key info is allocated in an arena, one should - * not call this function with freeit = PR_FALSE. The function should - * destroy the arena. - */ -extern void -SECKEY_DestroyEncryptedPrivateKeyInfo(SECKEYEncryptedPrivateKeyInfo *epki, - PRBool freeit); - -/* Copy private key info structure. - * poolp is the arena into which the contents of from is to be copied. - * NULL is a valid entry. - * to is the destination private key info - * from is the source private key info - * if either from or to is NULL or an error occurs, SECFailure is - * returned. otherwise, SECSuccess is returned. - */ -extern SECStatus -SECKEY_CopyPrivateKeyInfo(PRArenaPool *poolp, - SECKEYPrivateKeyInfo *to, - SECKEYPrivateKeyInfo *from); - -extern SECStatus -SECKEY_CacheStaticFlags(SECKEYPrivateKey* key); - -/* Copy encrypted private key info structure. - * poolp is the arena into which the contents of from is to be copied. - * NULL is a valid entry. - * to is the destination encrypted private key info - * from is the source encrypted private key info - * if either from or to is NULL or an error occurs, SECFailure is - * returned. otherwise, SECSuccess is returned. - */ -extern SECStatus -SECKEY_CopyEncryptedPrivateKeyInfo(PRArenaPool *poolp, - SECKEYEncryptedPrivateKeyInfo *to, - SECKEYEncryptedPrivateKeyInfo *from); -/* - * Accessor functions for key type of public and private keys. - */ -KeyType SECKEY_GetPrivateKeyType(SECKEYPrivateKey *privKey); -KeyType SECKEY_GetPublicKeyType(SECKEYPublicKey *pubKey); - -/* - * Creates a PublicKey from its DER encoding. - * Currently only supports RSA and DSA keys. - */ -SECKEYPublicKey* -SECKEY_ImportDERPublicKey(SECItem *derKey, CK_KEY_TYPE type); - -SECKEYPrivateKeyList* -SECKEY_NewPrivateKeyList(void); - -void -SECKEY_DestroyPrivateKeyList(SECKEYPrivateKeyList *keys); - -void -SECKEY_RemovePrivateKeyListNode(SECKEYPrivateKeyListNode *node); - -SECStatus -SECKEY_AddPrivateKeyToListTail( SECKEYPrivateKeyList *list, - SECKEYPrivateKey *key); - -#define PRIVKEY_LIST_HEAD(l) ((SECKEYPrivateKeyListNode*)PR_LIST_HEAD(&l->list)) -#define PRIVKEY_LIST_NEXT(n) ((SECKEYPrivateKeyListNode *)n->links.next) -#define PRIVKEY_LIST_END(n,l) (((void *)n) == ((void *)&l->list)) - -SECKEYPublicKeyList* -SECKEY_NewPublicKeyList(void); - -void -SECKEY_DestroyPublicKeyList(SECKEYPublicKeyList *keys); - -void -SECKEY_RemovePublicKeyListNode(SECKEYPublicKeyListNode *node); - -SECStatus -SECKEY_AddPublicKeyToListTail( SECKEYPublicKeyList *list, - SECKEYPublicKey *key); - -#define PUBKEY_LIST_HEAD(l) ((SECKEYPublicKeyListNode*)PR_LIST_HEAD(&l->list)) -#define PUBKEY_LIST_NEXT(n) ((SECKEYPublicKeyListNode *)n->links.next) -#define PUBKEY_LIST_END(n,l) (((void *)n) == ((void *)&l->list)) - -/* - * Length in bits of the EC's field size. This is also the length of - * the x and y coordinates of EC points, such as EC public keys and - * base points. - * - * Return 0 on failure (unknown EC domain parameters). - */ -extern int SECKEY_ECParamsToKeySize(const SECItem *params); - -/* - * Length in bits of the EC base point order, usually denoted n. This - * is also the length of EC private keys and ECDSA signature components - * r and s. - * - * Return 0 on failure (unknown EC domain parameters). - */ -extern int SECKEY_ECParamsToBasePointOrderLen(const SECItem *params); - -SEC_END_PROTOS - -#endif /* _KEYHI_H_ */ |