diff options
Diffstat (limited to 'security/nss/lib/freebl/mpi/Makefile')
| -rw-r--r-- | security/nss/lib/freebl/mpi/Makefile | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/security/nss/lib/freebl/mpi/Makefile b/security/nss/lib/freebl/mpi/Makefile new file mode 100644 index 000000000..c1acb2d12 --- /dev/null +++ b/security/nss/lib/freebl/mpi/Makefile @@ -0,0 +1,278 @@ +## +## Makefile for MPI library +## +## The contents of this file are subject to the Mozilla Public +## License Version 1.1 (the "License"); you may not use this file +## except in compliance with the License. You may obtain a copy of +## the License at http://www.mozilla.org/MPL/ +## +## Software distributed under the License is distributed on an "AS +## IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +## implied. See the License for the specific language governing +## rights and limitations under the License. +## +## The Original Code is the MPI Arbitrary Precision Integer Arithmetic +## library. +## +## The Initial Developer of the Original Code is +## Michael J. Fromberger <sting@linguist.dartmouth.edu> +## +## Portions created by Michael J. Fromberger are +## Copyright (C) 1998, 2000 Michael J. Fromberger. All Rights Reserved. +## +## Portions created by Sun Microsystems, Inc. are Copyright (C) 2003 +## Sun Microsystems, Inc. All Rights Reserved. +## +## Contributor(s): +## Netscape Communications Corporation +## Richard C. Swift (swift@netscape.com) +## Douglas Stebila <douglas@stebila.ca>, Sun Microsystems Laboratories +## +## Alternatively, the contents of this file may be used under the +## terms of the GNU General Public License Version 2 or later (the +## "GPL"), in which case the provisions of the GPL are applicable +## instead of those above. If you wish to allow use of your +## version of this file only under the terms of the GPL and not to +## allow others to use your version of this file under the MPL, +## indicate your decision by deleting the provisions above and +## replace them with the notice and other provisions required by +## the GPL. If you do not delete the provisions above, a recipient +## may use your version of this file under either the MPL or the +## GPL. +## +## +## $Id$ +## + +## Define CC to be the C compiler you wish to use. The GNU cc +## compiler (gcc) should work, at the very least +#CC=cc +#CC=gcc + +## +## Define PERL to point to your local Perl interpreter. It +## should be Perl 5.x, although it's conceivable that Perl 4 +## might work ... I haven't tested it. +## +#PERL=/usr/bin/perl +PERL=perl + +include target.mk + +CFLAGS+= $(XCFLAGS) + +## +## Define LIBS to include any libraries you need to link against. +## If NO_TABLE is define, LIBS should include '-lm' or whatever is +## necessary to bring in the math library. Otherwise, it can be +## left alone, unless your system has other peculiar requirements. +## +LIBS=#-lmalloc#-lefence#-lm + +## +## Define RANLIB to be the library header randomizer; you might not +## need this on some systems (just set it to 'echo' on these systems, +## such as IRIX) +## +RANLIB=echo + +## +## This is the version string used for the documentation and +## building the distribution tarball. Don't mess with it unless +## you are releasing a new version +VERS=1.7p6 + +## ---------------------------------------------------------------------- +## You probably don't need to change anything below this line... +## + +## +## This is the list of source files that need to be packed into +## the distribution file +SRCS= mpi.c mpprime.c mplogic.c mp_gf2m.c mpmontg.c mpi-test.c primes.c tests/ \ + utils/gcd.c utils/invmod.c utils/lap.c \ + utils/ptab.pl utils/sieve.c utils/isprime.c\ + utils/dec2hex.c utils/hex2dec.c utils/bbs_rand.c \ + utils/bbsrand.c utils/prng.c utils/primegen.c \ + utils/basecvt.c utils/makeprime.c\ + utils/fact.c utils/exptmod.c utils/pi.c utils/metime.c \ + utils/mpi.h utils/mpprime.h mulsqr.c \ + make-test-arrays test-arrays.txt all-tests make-logtab \ + types.pl stats timetest multest + +## These are the header files that go into the distribution file +HDRS=mpi.h mpi-config.h utils/mpi.h utils/mpi-config.h mpprime.h mplogic.h mp_gf2m.h \ + mp_gf2m-priv.h utils/bbs_rand.h tests/mpi.h tests/mpprime.h + +## These are the documentation files that go into the distribution file +DOCS=README doc utils/README utils/PRIMES + +## This is the list of tools built by 'make tools' +TOOLS=gcd invmod isprime lap dec2hex hex2dec primegen prng \ + basecvt fact exptmod pi makeprime identest + +LIBOBJS = mpprime.o mpmontg.o mplogic.o mp_gf2m.o mpi.o $(AS_OBJS) +LIBHDRS = mpi-config.h mpi-priv.h mpi.h +APPHDRS = mpi-config.h mpi.h mplogic.h mp_gf2m.h mpprime.h + +help: + @ echo "" + @ echo "The following targets can be built with this Makefile:" + @ echo "" + @ echo "libmpi.a - arithmetic and prime testing library" + @ echo "mpi-test - test driver (requires MP_IOFUNC)" + @ echo "tools - command line tools" + @ echo "doc - manual pages for tools" + @ echo "clean - clean up objects and such" + @ echo "distclean - get ready for distribution" + @ echo "dist - distribution tarball" + @ echo "" + +.SUFFIXES: .c .o .i + +.c.i: + $(CC) $(CFLAGS) -E $< > $@ + +#.c.o: $*.h $*.c +# $(CC) $(CFLAGS) -c $< + +#--------------------------------------- + +$(LIBOBJS): $(LIBHDRS) + +logtab.h: make-logtab + $(PERL) make-logtab > logtab.h + +mpi.o: mpi.c logtab.h $(LIBHDRS) + +mplogic.o: mplogic.c mpi-priv.h mplogic.h $(LIBHDRS) + +mp_gf2m.o: mp_gf2m.c mpi-priv.h mp_gf2m.h mp_gf2m-priv.h $(LIBHDRS) + +mpmontg.o: mpmontg.c mpi-priv.h mplogic.h mpprime.h $(LIBHDRS) + +mpprime.o: mpprime.c mpi-priv.h mpprime.h mplogic.h primes.c $(LIBHDRS) + +mpi_mips.o: mpi_mips.s + $(CC) -o $@ $(ASFLAGS) -c mpi_mips.s + +mpi_sparc.o : montmulf.h + +mpv_sparcv9.s: vis_64.il mpv_sparc.c + $(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_64.il mpv_sparc.c + +mpv_sparcv8.s: vis_64.il mpv_sparc.c + $(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_32.il mpv_sparc.c + +montmulfv8.o montmulfv9.o mpv_sparcv8.o mpv_sparcv9.o : %.o : %.s + $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -c $< + +# This rule is used to build the .s sources, which are then hand optimized. +#montmulfv8.s montmulfv9.s : montmulf%.s : montmulf%.il montmulf.c montmulf.h +# $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -S montmulf$*.il montmulf.c + + +libmpi.a: $(LIBOBJS) + ar -cvr libmpi.a $(LIBOBJS) + $(RANLIB) libmpi.a + +lib libs: libmpi.a + +mpi.i: mpi.h + +#--------------------------------------- + +MPTESTOBJS = mptest1.o mptest2.o mptest3.o mptest3a.o mptest4.o mptest4a.o \ + mptest4b.o mptest6.o mptest7.o mptest8.o mptest9.o mptestb.o +MPTESTS = $(MPTESTOBJS:.o=) + +$(MPTESTOBJS): mptest%.o: tests/mptest-%.c $(LIBHDRS) + $(CC) $(CFLAGS) -o $@ -c $< + +$(MPTESTS): mptest%: mptest%.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +tests: mptest1 mptest2 mptest3 mptest3a mptest4 mptest4a mptest4b mptest6 \ + mptestb bbsrand + +utests: mptest7 mptest8 mptest9 + +#--------------------------------------- + +EXTRAOBJS = bbsrand.o bbs_rand.o prng.o +UTILOBJS = primegen.o metime.o identest.o basecvt.o fact.o exptmod.o pi.o \ + makeprime.o gcd.o invmod.o lap.o isprime.o \ + dec2hex.o hex2dec.o +UTILS = $(UTILOBJS:.o=) + +$(UTILS): % : %.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +$(UTILOBJS) $(EXTRAOBJS): %.o : utils/%.c $(LIBHDRS) + $(CC) $(CFLAGS) -o $@ -c $< + +prng: prng.o bbs_rand.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +bbsrand: bbsrand.o bbs_rand.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +utils: $(UTILS) prng bbsrand + +#--------------------------------------- + +test-info.c: test-arrays.txt + $(PERL) make-test-arrays test-arrays.txt > test-info.c + +mpi-test.o: mpi-test.c test-info.c $(LIBHDRS) + $(CC) $(CFLAGS) -o $@ -c $< + +mpi-test: mpi-test.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +mdxptest.o: mdxptest.c $(LIBHDRS) mpi-priv.h + +mdxptest: mdxptest.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +mulsqr.o: mulsqr.c logtab.h mpi.h mpi-config.h mpprime.h + $(CC) $(CFLAGS) -DMP_SQUARE=1 -o $@ -c mulsqr.c + +mulsqr: mulsqr.o libmpi.a + $(CC) $(CFLAGS) -o $@ $^ $(LIBS) + +#--------------------------------------- + +alltests: tests utests mpi-test + +tools: $(TOOLS) + +doc: + (cd doc; ./build) + +clean: + rm -f *.o *.a *.i + rm -f core + rm -f *~ .*~ + rm -f utils/*.o + rm -f utils/core + rm -f utils/*~ utils/.*~ + +clobber: clean + rm -f $(TOOLS) $(UTILS) + +distclean: clean + rm -f mptest? mpi-test metime mulsqr karatsuba + rm -f mptest?a mptest?b + rm -f utils/mptest? + rm -f test-info.c logtab.h + rm -f libmpi.a + rm -f $(TOOLS) + +dist: Makefile $(HDRS) $(SRCS) $(DOCS) + tar -cvf mpi-$(VERS).tar Makefile $(HDRS) $(SRCS) $(DOCS) + pgps -ab mpi-$(VERS).tar + chmod +r mpi-$(VERS).tar.asc + gzip -9 mpi-$(VERS).tar + +# END |