diff options
Diffstat (limited to 'security/nss/lib/freebl/mpi/Makefile')
| -rw-r--r-- | security/nss/lib/freebl/mpi/Makefile | 248 |
1 files changed, 0 insertions, 248 deletions
diff --git a/security/nss/lib/freebl/mpi/Makefile b/security/nss/lib/freebl/mpi/Makefile deleted file mode 100644 index 4f6cd7583..000000000 --- a/security/nss/lib/freebl/mpi/Makefile +++ /dev/null @@ -1,248 +0,0 @@ -# -# Makefile for MPI library - -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# -# $Id$ -# - -## Define CC to be the C compiler you wish to use. The GNU cc -## compiler (gcc) should work, at the very least -#CC=cc -#CC=gcc - -## -## Define PERL to point to your local Perl interpreter. It -## should be Perl 5.x, although it's conceivable that Perl 4 -## might work ... I haven't tested it. -## -#PERL=/usr/bin/perl -#PERL=perl - -include target.mk - -CFLAGS+= $(XCFLAGS) - -## -## Define LIBS to include any libraries you need to link against. -## If NO_TABLE is define, LIBS should include '-lm' or whatever is -## necessary to bring in the math library. Otherwise, it can be -## left alone, unless your system has other peculiar requirements. -## -LIBS=#-lmalloc#-lefence#-lm - -## -## Define RANLIB to be the library header randomizer; you might not -## need this on some systems (just set it to 'echo' on these systems, -## such as IRIX) -## -RANLIB=echo - -## -## This is the version string used for the documentation and -## building the distribution tarball. Don't mess with it unless -## you are releasing a new version -VERS=1.7p6 - -## ---------------------------------------------------------------------- -## You probably don't need to change anything below this line... -## - -## -## This is the list of source files that need to be packed into -## the distribution file -SRCS= mpi.c mpprime.c mplogic.c mp_gf2m.c mpmontg.c mpi-test.c primes.c \ - mpcpucache.c tests/ \ - utils/gcd.c utils/invmod.c utils/lap.c \ - utils/ptab.pl utils/sieve.c utils/isprime.c\ - utils/dec2hex.c utils/hex2dec.c utils/bbs_rand.c \ - utils/bbsrand.c utils/prng.c utils/primegen.c \ - utils/basecvt.c utils/makeprime.c\ - utils/fact.c utils/exptmod.c utils/pi.c utils/metime.c \ - utils/mpi.h utils/mpprime.h mulsqr.c \ - make-test-arrays test-arrays.txt all-tests make-logtab \ - types.pl stats timetest multest - -## These are the header files that go into the distribution file -HDRS=mpi.h mpi-config.h utils/mpi.h utils/mpi-config.h mpprime.h mplogic.h mp_gf2m.h \ - mp_gf2m-priv.h utils/bbs_rand.h tests/mpi.h tests/mpprime.h - -## These are the documentation files that go into the distribution file -DOCS=README doc utils/README utils/PRIMES - -## This is the list of tools built by 'make tools' -TOOLS=gcd invmod isprime lap dec2hex hex2dec primegen prng \ - basecvt fact exptmod pi makeprime identest - -LIBOBJS = mpprime.o mpmontg.o mplogic.o mp_gf2m.o mpi.o mpcpucache.o $(AS_OBJS) -LIBHDRS = mpi-config.h mpi-priv.h mpi.h -APPHDRS = mpi-config.h mpi.h mplogic.h mp_gf2m.h mpprime.h - -help: - @ echo "" - @ echo "The following targets can be built with this Makefile:" - @ echo "" - @ echo "libmpi.a - arithmetic and prime testing library" - @ echo "mpi-test - test driver (requires MP_IOFUNC)" - @ echo "tools - command line tools" - @ echo "doc - manual pages for tools" - @ echo "clean - clean up objects and such" - @ echo "distclean - get ready for distribution" - @ echo "dist - distribution tarball" - @ echo "" - -.SUFFIXES: .c .o .i - -.c.i: - $(CC) $(CFLAGS) -E $< > $@ - -#.c.o: $*.h $*.c -# $(CC) $(CFLAGS) -c $< - -#--------------------------------------- - -$(LIBOBJS): $(LIBHDRS) - -logtab.h: make-logtab - $(PERL) make-logtab > logtab.h - -mpi.o: mpi.c logtab.h $(LIBHDRS) - -mplogic.o: mplogic.c mpi-priv.h mplogic.h $(LIBHDRS) - -mp_gf2m.o: mp_gf2m.c mpi-priv.h mp_gf2m.h mp_gf2m-priv.h $(LIBHDRS) - -mpmontg.o: mpmontg.c mpi-priv.h mplogic.h mpprime.h $(LIBHDRS) - -mpprime.o: mpprime.c mpi-priv.h mpprime.h mplogic.h primes.c $(LIBHDRS) - -mpcpucache.o: mpcpucache.c $(LIBHDRS) - -mpi_mips.o: mpi_mips.s - $(CC) -o $@ $(ASFLAGS) -c mpi_mips.s - -mpi_sparc.o : montmulf.h - -mpv_sparcv9.s: vis_64.il mpv_sparc.c - $(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_64.il mpv_sparc.c - -mpv_sparcv8.s: vis_64.il mpv_sparc.c - $(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_32.il mpv_sparc.c - -montmulfv8.o montmulfv9.o mpv_sparcv8.o mpv_sparcv9.o : %.o : %.s - $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -c $< - -mpi_arm.o: mpi_arm.c $(LIBHDRS) - -# This rule is used to build the .s sources, which are then hand optimized. -#montmulfv8.s montmulfv9.s : montmulf%.s : montmulf%.il montmulf.c montmulf.h -# $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -S montmulf$*.il montmulf.c - - -libmpi.a: $(LIBOBJS) - ar -cvr libmpi.a $(LIBOBJS) - $(RANLIB) libmpi.a - -lib libs: libmpi.a - -mpi.i: mpi.h - -#--------------------------------------- - -MPTESTOBJS = mptest1.o mptest2.o mptest3.o mptest3a.o mptest4.o mptest4a.o \ - mptest4b.o mptest6.o mptest7.o mptest8.o mptest9.o mptestb.o -MPTESTS = $(MPTESTOBJS:.o=) - -$(MPTESTOBJS): mptest%.o: tests/mptest-%.c $(LIBHDRS) - $(CC) $(CFLAGS) -o $@ -c $< - -$(MPTESTS): mptest%: mptest%.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -tests: mptest1 mptest2 mptest3 mptest3a mptest4 mptest4a mptest4b mptest6 \ - mptestb bbsrand - -utests: mptest7 mptest8 mptest9 - -#--------------------------------------- - -EXTRAOBJS = bbsrand.o bbs_rand.o prng.o -UTILOBJS = primegen.o metime.o identest.o basecvt.o fact.o exptmod.o pi.o \ - makeprime.o gcd.o invmod.o lap.o isprime.o \ - dec2hex.o hex2dec.o -UTILS = $(UTILOBJS:.o=) - -$(UTILS): % : %.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -$(UTILOBJS) $(EXTRAOBJS): %.o : utils/%.c $(LIBHDRS) - $(CC) $(CFLAGS) -o $@ -c $< - -prng: prng.o bbs_rand.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -bbsrand: bbsrand.o bbs_rand.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -utils: $(UTILS) prng bbsrand - -#--------------------------------------- - -test-info.c: test-arrays.txt - $(PERL) make-test-arrays test-arrays.txt > test-info.c - -mpi-test.o: mpi-test.c test-info.c $(LIBHDRS) - $(CC) $(CFLAGS) -o $@ -c $< - -mpi-test: mpi-test.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -mdxptest.o: mdxptest.c $(LIBHDRS) mpi-priv.h - -mdxptest: mdxptest.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -mulsqr.o: mulsqr.c logtab.h mpi.h mpi-config.h mpprime.h - $(CC) $(CFLAGS) -DMP_SQUARE=1 -o $@ -c mulsqr.c - -mulsqr: mulsqr.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -#--------------------------------------- - -alltests: tests utests mpi-test - -tools: $(TOOLS) - -doc: - (cd doc; ./build) - -clean: - rm -f *.o *.a *.i - rm -f core - rm -f *~ .*~ - rm -f utils/*.o - rm -f utils/core - rm -f utils/*~ utils/.*~ - -clobber: clean - rm -f $(TOOLS) $(UTILS) - -distclean: clean - rm -f mptest? mpi-test metime mulsqr karatsuba - rm -f mptest?a mptest?b - rm -f utils/mptest? - rm -f test-info.c logtab.h - rm -f libmpi.a - rm -f $(TOOLS) - -dist: Makefile $(HDRS) $(SRCS) $(DOCS) - tar -cvf mpi-$(VERS).tar Makefile $(HDRS) $(SRCS) $(DOCS) - pgps -ab mpi-$(VERS).tar - chmod +r mpi-$(VERS).tar.asc - gzip -9 mpi-$(VERS).tar - -# END |