diff options
Diffstat (limited to 'security/nss/lib/freebl/mpi/Makefile')
| -rw-r--r-- | security/nss/lib/freebl/mpi/Makefile | 424 |
1 files changed, 0 insertions, 424 deletions
diff --git a/security/nss/lib/freebl/mpi/Makefile b/security/nss/lib/freebl/mpi/Makefile deleted file mode 100644 index a4724af90..000000000 --- a/security/nss/lib/freebl/mpi/Makefile +++ /dev/null @@ -1,424 +0,0 @@ -## -## Makefile for MPI library -## -## The contents of this file are subject to the Mozilla Public -## License Version 1.1 (the "License"); you may not use this file -## except in compliance with the License. You may obtain a copy of -## the License at http://www.mozilla.org/MPL/ -## -## Software distributed under the License is distributed on an "AS -## IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -## implied. See the License for the specific language governing -## rights and limitations under the License. -## -## The Original Code is the MPI Arbitrary Precision Integer Arithmetic -## library. -## -## The Initial Developer of the Original Code is -## Michael J. Fromberger <sting@linguist.dartmouth.edu> -## -## Portions created by Michael J. Fromberger are -## Copyright (C) 1998, 2000 Michael J. Fromberger. All Rights Reserved. -## -## Contributor(s): -## Netscape Communications Corporation -## Richard C. Swift (swift@netscape.com) -## -## Alternatively, the contents of this file may be used under the -## terms of the GNU General Public License Version 2 or later (the -## "GPL"), in which case the provisions of the GPL are applicable -## instead of those above. If you wish to allow use of your -## version of this file only under the terms of the GPL and not to -## allow others to use your version of this file under the MPL, -## indicate your decision by deleting the provisions above and -## replace them with the notice and other provisions required by -## the GPL. If you do not delete the provisions above, a recipient -## may use your version of this file under either the MPL or the -## GPL. -## -## -## $Id$ -## - -## Define CC to be the C compiler you wish to use. The GNU cc -## compiler (gcc) should work, at the very least -#CC=cc -#CC=gcc - -## -## Define PERL to point to your local Perl interpreter. It -## should be Perl 5.x, although it's conceivable that Perl 4 -## might work ... I haven't tested it. -## -#PERL=/usr/bin/perl -PERL=perl - -## -## Define CFLAGS to contain any local options your compiler -## setup requires. -## -## Conditional compilation options are no longer here; see -## the file 'mpi-config.h' instead. -## -MPICMN = -I. -DMP_API_COMPATIBLE -DMP_IOFUNC -CFLAGS= -O $(MPICMN) -#CFLAGS=-ansi -fullwarn -woff 1521 -O3 $(MPICMN) -#CFLAGS=-ansi -pedantic -Wall -O3 $(MPICMN) -#CFLAGS=-ansi -pedantic -Wall -g -O2 -DMP_DEBUG=1 $(MPICMN) - -ifeq ($(TARGET),mipsIRIX) -#IRIX -#MPICMN += -DMP_MONT_USE_MP_MUL -MPICMN += -DMP_ASSEMBLY_MULTIPLY -DMP_ASSEMBLY_SQUARE -MPICMN += -DMP_USE_UINT_DIGIT -#MPICMN += -DMP_NO_MP_WORD -AS_OBJS = mpi_mips.o -#ASFLAGS = -O -OPT:Olimit=4000 -dollar -fullwarn -xansi -n32 -mips3 -exceptions -ASFLAGS = -O -OPT:Olimit=4000 -dollar -fullwarn -xansi -n32 -mips3 -#CFLAGS=-ansi -n32 -O3 -fullwarn -woff 1429 -D_SGI_SOURCE $(MPICMN) -CFLAGS=-ansi -n32 -O2 -fullwarn -woff 1429 -D_SGI_SOURCE $(MPICMN) -#CFLAGS=-ansi -n32 -g -fullwarn -woff 1429 -D_SGI_SOURCE $(MPICMN) -#CFLAGS=-ansi -64 -O2 -fullwarn -woff 1429 -D_SGI_SOURCE -DMP_NO_MP_WORD \ - $(MPICMN) -endif - -ifeq ($(TARGET),alphaOSF1) -#Alpha/OSF1 -MPICMN += -DMP_ASSEMBLY_MULTIPLY -AS_OBJS+= mpvalpha.o -#CFLAGS= -O -Olimit 4000 -ieee_with_inexact -std1 -DOSF1 -D_REENTRANT $(MPICMN) -CFLAGS= -O -Olimit 4000 -ieee_with_inexact -std1 -DOSF1 -D_REENTRANT \ - -DMP_NO_MP_WORD $(MPICMN) -endif - -ifeq ($(TARGET),v9SOLARIS) -#Solaris 64 -SOLARIS_FPU_FLAGS = -fast -xO5 -xrestrict=%all -xchip=ultra -xarch=v9a -KPIC -mt -#SOLARIS_FPU_FLAGS = -fast -xO5 -xrestrict=%all -xdepend -xchip=ultra -xarch=v9a -KPIC -mt -SOLARIS_ASM_FLAGS = -xchip=ultra -xarch=v9a -KPIC -mt -AS_OBJS += montmulfv9.o -AS_OBJS += mpi_sparc.o mpv_sparcv9.o -MPICMN += -DMP_USE_UINT_DIGIT -#MPICMN += -DMP_NO_MP_WORD -MPICMN += -DMP_ASSEMBLY_MULTIPLY -MPICMN += -DMP_USING_MONT_MULF -CFLAGS= -O -KPIC -DSVR4 -DSYSV -D__svr4 -D__svr4__ -DSOLARIS -D_REENTRANT \ - -DSOLARIS2_8 -D_SVID_GETTOD -xarch=v9 -DXP_UNIX $(MPICMN) -#CFLAGS= -g -KPIC -DSVR4 -DSYSV -D__svr4 -D__svr4__ -DSOLARIS -D_REENTRANT \ - -DSOLARIS2_8 -D_SVID_GETTOD -xarch=v9 -DXP_UNIX $(MPICMN) -endif - -ifeq ($(TARGET),v8plusSOLARIS) -#Solaris 32 -SOLARIS_FPU_FLAGS = -fast -xO5 -xrestrict=%all -xdepend -xchip=ultra -xarch=v8plusa -KPIC -mt -SOLARIS_ASM_FLAGS = -xchip=ultra -xarch=v8plusa -KPIC -mt -AS_OBJS = montmulfv8.o mpi_sparc.o mpv_sparcv8.o -#AS_OBJS = montmulf.o -MPICMN += -DMP_ASSEMBLY_MULTIPLY -MPICMN += -DMP_USING_MONT_MULF -DMP_USE_UINT_DIGIT -MPICMN += -DMP_NO_MP_WORD -CFLAGS=-O -KPIC -DSVR4 -DSYSV -D__svr4 -D__svr4__ -DSOLARIS -D_REENTRANT \ - -DSOLARIS2_6 -D_SVID_GETTOD -xarch=v8plus -DXP_UNIX $(MPICMN) -endif - -ifeq ($(TARGET),v8SOLARIS) -#Solaris 32 -#SOLARIS_FPU_FLAGS = -fast -xO5 -xrestrict=%all -xdepend -xchip=ultra -xarch=v8 -KPIC -mt -#SOLARIS_ASM_FLAGS = -xchip=ultra -xarch=v8plusa -KPIC -mt -#AS_OBJS = montmulfv8.o mpi_sparc.o mpv_sparcv8.o -#AS_OBJS = montmulf.o -#MPICMN += -DMP_USING_MONT_MULF -#MPICMN += -DMP_ASSEMBLY_MULTIPLY -MPICMN += -DMP_USE_LONG_LONG_MULTIPLY -DMP_USE_UINT_DIGIT -MPICMN += -DMP_NO_MP_WORD -CFLAGS=-O -KPIC -DSVR4 -DSYSV -D__svr4 -D__svr4__ -DSOLARIS -D_REENTRANT \ - -DSOLARIS2_6 -D_SVID_GETTOD -xarch=v8 -DXP_UNIX $(MPICMN) -endif - -ifeq ($(TARGET),PA2.0WHPUX) -#HPUX64 (HP PA 2.0 Wide) using MAXPY and 64-bit digits -MPICMN += -DMP_ASSEMBLY_MULTIPLY -DMP_ASSEMBLY_SQUARE -AS_OBJS = mpi_hp.o hpma512.o hppa20.o -CFLAGS= -O -DHPUX10 -D_POSIX_C_SOURCE=199506L -Ae +Z -DHPUX -Dhppa \ - -D_HPUX_SOURCE -Aa +e -z +DA2.0W +DS2.0 +O3 +DChpux -DHPUX11 -DXP_UNIX \ - $(MPICMN) -AS = $(CC) $(CFLAGS) -c -endif - -ifeq ($(TARGET),PA2.0NHPUX) -#HPUX32 (HP PA 2.0 Narrow) hybrid model, using 32-bit digits -# This one is for DA2.0 (N) which is the 32-bit ABI with 64-bit registers. -MPICMN += -DMP_ASSEMBLY_MULTIPLY -DMP_ASSEMBLY_SQUARE -AS_OBJS = mpi_hp.o hpma512.o hppa20.o -CFLAGS= -O -DHPUX10 -D_POSIX_C_SOURCE=199506L -Ae +Z -DHPUX -Dhppa \ - -D_HPUX_SOURCE -Aa +e -z +DA2.0 +DS2.0 +O3 +DChpux -DHPUX11 -DXP_UNIX \ - -Wl,+k $(MPICMN) -#CFLAGS= -g -DHPUX10 -D_POSIX_C_SOURCE=199506L -Ae +Z -DHPUX -Dhppa \ - -D_HPUX_SOURCE -Aa +e -z +DA2.0 +DS2.0 +DChpux -DHPUX11 -DXP_UNIX \ - -Wl,+k $(MPICMN) -AS = $(CC) $(CFLAGS) -c -endif - -ifeq ($(TARGET),PA1.1HPUX) -#HPUX32 (HP PA 1.1) Pure 32 bit -MPICMN += -DMP_USE_UINT_DIGIT -DMP_NO_MP_WORD -#MPICMN += -DMP_USE_LONG_LONG_MULTIPLY -CFLAGS= -O -DHPUX10 -D_POSIX_C_SOURCE=199506L -Ae +Z -DHPUX -Dhppa \ - -D_HPUX_SOURCE +DAportable +DS1.1 -DHPUX11 -DXP_UNIX $(MPICMN) -##CFLAGS= -g -DHPUX10 -D_POSIX_C_SOURCE=199506L -Ae +Z -DHPUX -Dhppa \ -# -D_HPUX_SOURCE +DAportable +DS1.1 -DHPUX11 -DXP_UNIX $(MPICMN) -endif - -ifeq ($(TARGET),32AIX) -# -CC = xlC_r -MPICMN += -DMP_USE_UINT_DIGIT -MPICMN += -DMP_NO_DIV_WORD -#MPICMN += -DMP_NO_MUL_WORD -MPICMN += -DMP_NO_ADD_WORD -MPICMN += -DMP_NO_SUB_WORD -#MPICMN += -DMP_NO_MP_WORD -#MPICMN += -DMP_USE_LONG_LONG_MULTIPLY -CFLAGS = -O -DAIX -DSYSV -qarch=com -DAIX4_3 -DXP_UNIX -UDEBUG -DNDEBUG $(MPICMN) -#CFLAGS = -g -DAIX -DSYSV -qarch=com -DAIX4_3 -DXP_UNIX -UDEBUG -DNDEBUG $(MPICMN) -#CFLAGS += -pg -endif - -ifeq ($(TARGET),64AIX) -# -CC = xlC_r -MPICMN += -DMP_USE_UINT_DIGIT -CFLAGS = -O -O2 -DAIX -DSYSV -qarch=com -DAIX_64BIT -DAIX4_3 -DXP_UNIX -UDEBUG -DNDEBUG $(MPICMN) -OBJECT_MODE=64 -export OBJECT_MODE -endif - -ifeq ($(TARGET),x86LINUX) -#Linux -AS_OBJS = mpi_x86.o -MPICMN += -DMP_ASSEMBLY_MULTIPLY -DMP_ASSEMBLY_SQUARE -DMP_ASSEMBLY_DIV_2DX1D -MPICMN += -DMP_MONT_USE_MP_MUL -CFLAGS= -O2 -fPIC -DLINUX1_2 -Di386 -D_XOPEN_SOURCE -DLINUX2_1 -ansi -Wall \ - -pipe -DLINUX -Dlinux -D_POSIX_SOURCE -D_BSD_SOURCE -DHAVE_STRERROR \ - -DXP_UNIX -UDEBUG -DNDEBUG -D_REENTRANT $(MPICMN) -#CFLAGS= -g -fPIC -DLINUX1_2 -Di386 -D_XOPEN_SOURCE -DLINUX2_1 -ansi -Wall \ - -pipe -DLINUX -Dlinux -D_POSIX_SOURCE -D_BSD_SOURCE -DHAVE_STRERROR \ - -DXP_UNIX -DDEBUG -UNDEBUG -D_REENTRANT $(MPICMN) -#CFLAGS= -g -fPIC -DLINUX1_2 -Di386 -D_XOPEN_SOURCE -DLINUX2_1 -ansi -Wall \ - -pipe -DLINUX -Dlinux -D_POSIX_SOURCE -D_BSD_SOURCE -DHAVE_STRERROR \ - -DXP_UNIX -UDEBUG -DNDEBUG -D_REENTRANT $(MPICMN) -endif - -## -## Define LIBS to include any libraries you need to link against. -## If NO_TABLE is define, LIBS should include '-lm' or whatever is -## necessary to bring in the math library. Otherwise, it can be -## left alone, unless your system has other peculiar requirements. -## -LIBS=#-lmalloc#-lefence#-lm - -## -## Define RANLIB to be the library header randomizer; you might not -## need this on some systems (just set it to 'echo' on these systems, -## such as IRIX) -## -RANLIB=echo - -## -## This is the version string used for the documentation and -## building the distribution tarball. Don't mess with it unless -## you are releasing a new version -VERS=1.7p6 - -## ---------------------------------------------------------------------- -## You probably don't need to change anything below this line... -## - -## -## This is the list of source files that need to be packed into -## the distribution file -SRCS= mpi.c mpprime.c mplogic.c mpmontg.c mpi-test.c primes.c tests/ \ - utils/gcd.c utils/invmod.c utils/lap.c \ - utils/ptab.pl utils/sieve.c utils/isprime.c\ - utils/dec2hex.c utils/hex2dec.c utils/bbs_rand.c \ - utils/bbsrand.c utils/prng.c utils/primegen.c \ - utils/basecvt.c utils/makeprime.c\ - utils/fact.c utils/exptmod.c utils/pi.c utils/metime.c \ - utils/mpi.h utils/mpprime.h mulsqr.c \ - make-test-arrays test-arrays.txt all-tests make-logtab \ - types.pl stats timetest multest - -## These are the header files that go into the distribution file -HDRS=mpi.h mpi-config.h utils/mpi.h utils/mpi-config.h mpprime.h mplogic.h \ - utils/bbs_rand.h tests/mpi.h tests/mpprime.h - -## These are the documentation files that go into the distribution file -DOCS=README doc utils/README utils/PRIMES - -## This is the list of tools built by 'make tools' -TOOLS=gcd invmod isprime lap dec2hex hex2dec primegen prng \ - basecvt fact exptmod pi makeprime identest - -LIBOBJS = mpprime.o mpmontg.o mplogic.o mpi.o $(AS_OBJS) -LIBHDRS = mpi-config.h mpi-priv.h mpi.h -APPHDRS = mpi-config.h mpi.h mplogic.h mpprime.h - -help: - @ echo "" - @ echo "The following targets can be built with this Makefile:" - @ echo "" - @ echo "libmpi.a - arithmetic and prime testing library" - @ echo "mpi-test - test driver (requires MP_IOFUNC)" - @ echo "tools - command line tools" - @ echo "doc - manual pages for tools" - @ echo "clean - clean up objects and such" - @ echo "distclean - get ready for distribution" - @ echo "dist - distribution tarball" - @ echo "" - -.SUFFIXES: .c .o .i - -.c.i: - $(CC) $(CFLAGS) -E $< > $@ - -#.c.o: $*.h $*.c -# $(CC) $(CFLAGS) -c $< - -#--------------------------------------- - -$(LIBOBJS): $(LIBHDRS) - -logtab.h: make-logtab - $(PERL) make-logtab > logtab.h - -mpi.o: mpi.c logtab.h $(LIBHDRS) - -mplogic.o: mplogic.c mpi-priv.h mplogic.h $(LIBHDRS) - -mpmontg.o: mpmontg.c mpi-priv.h mplogic.h mpprime.h $(LIBHDRS) - -mpprime.o: mpprime.c mpi-priv.h mpprime.h mplogic.h primes.c $(LIBHDRS) - -mpi_mips.o: mpi_mips.s - $(CC) -o $@ $(ASFLAGS) -c mpi_mips.s - -mpi_sparc.o : montmulf.h - -mpv_sparcv9.s: vis_64.il mpv_sparc.c - $(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_64.il mpv_sparc.c - -mpv_sparcv8.s: vis_64.il mpv_sparc.c - $(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_32.il mpv_sparc.c - -montmulfv8.o montmulfv9.o mpv_sparcv8.o mpv_sparcv9.o : %.o : %.s - $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -c $< - -# This rule is used to build the .s sources, which are then hand optimized. -#montmulfv8.s montmulfv9.s : montmulf%.s : montmulf%.il montmulf.c montmulf.h -# $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -S montmulf$*.il montmulf.c - - -libmpi.a: $(LIBOBJS) - ar -cvr libmpi.a $(LIBOBJS) - $(RANLIB) libmpi.a - -lib libs: libmpi.a - -mpi.i: mpi.h - -#--------------------------------------- - -MPTESTOBJS = mptest1.o mptest2.o mptest3.o mptest3a.o mptest4.o mptest4a.o \ - mptest4b.o mptest6.o mptest7.o mptest8.o mptest9.o -MPTESTS = $(MPTESTOBJS:.o=) - -$(MPTESTOBJS): mptest%.o: tests/mptest-%.c $(LIBHDRS) - $(CC) $(CFLAGS) -o $@ -c $< - -$(MPTESTS): mptest%: mptest%.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -tests: mptest1 mptest2 mptest3 mptest3a mptest4 mptest4a mptest4b mptest6 \ - bbsrand - -utests: mptest7 mptest8 mptest9 - -#--------------------------------------- - -EXTRAOBJS = bbsrand.o bbs_rand.o prng.o -UTILOBJS = primegen.o metime.o identest.o basecvt.o fact.o exptmod.o pi.o \ - makeprime.o gcd.o invmod.o lap.o isprime.o \ - dec2hex.o hex2dec.o -UTILS = $(UTILOBJS:.o=) - -$(UTILS): % : %.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -$(UTILOBJS) $(EXTRAOBJS): %.o : utils/%.c $(LIBHDRS) - $(CC) $(CFLAGS) -o $@ -c $< - -prng: prng.o bbs_rand.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -bbsrand: bbsrand.o bbs_rand.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -utils: $(UTILS) prng bbsrand - -#--------------------------------------- - -test-info.c: test-arrays.txt - $(PERL) make-test-arrays test-arrays.txt > test-info.c - -mpi-test.o: mpi-test.c test-info.c $(LIBHDRS) - $(CC) $(CFLAGS) -o $@ -c $< - -mpi-test: mpi-test.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -mdxptest.o: mdxptest.c $(LIBHDRS) mpi-priv.h - -mdxptest: mdxptest.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -mulsqr.o: mulsqr.c logtab.h mpi.h mpi-config.h mpprime.h - $(CC) $(CFLAGS) -DMP_SQUARE=1 -o $@ -c mulsqr.c - -mulsqr: mulsqr.o libmpi.a - $(CC) $(CFLAGS) -o $@ $^ $(LIBS) - -#--------------------------------------- - -alltests: tests utests mpi-test - -tools: $(TOOLS) - -doc: - (cd doc; ./build) - -clean: - rm -f *.o *.a *.i - rm -f core - rm -f *~ .*~ - rm -f utils/*.o - rm -f utils/core - rm -f utils/*~ utils/.*~ - -clobber: clean - rm -f $(TOOLS) $(UTILS) - -distclean: clean - rm -f mptest? mpi-test metime mulsqr karatsuba - rm -f mptest?a mptest?b - rm -f utils/mptest? - rm -f test-info.c logtab.h - rm -f libmpi.a - rm -f $(TOOLS) - -dist: Makefile $(HDRS) $(SRCS) $(DOCS) - tar -cvf mpi-$(VERS).tar Makefile $(HDRS) $(SRCS) $(DOCS) - pgps -ab mpi-$(VERS).tar - chmod +r mpi-$(VERS).tar.asc - gzip -9 mpi-$(VERS).tar - -# END |