diff options
Diffstat (limited to 'security/nss/lib/freebl/mpi/mpi-priv.h')
| -rw-r--r-- | security/nss/lib/freebl/mpi/mpi-priv.h | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/security/nss/lib/freebl/mpi/mpi-priv.h b/security/nss/lib/freebl/mpi/mpi-priv.h new file mode 100644 index 000000000..eaa683a77 --- /dev/null +++ b/security/nss/lib/freebl/mpi/mpi-priv.h @@ -0,0 +1,258 @@ +/* + * mpi-priv.h - Private header file for MPI + * Arbitrary precision integer arithmetic library + * + * NOTE WELL: the content of this header file is NOT part of the "public" + * API for the MPI library, and may change at any time. + * Application programs that use libmpi should NOT include this header file. + * + * The contents of this file are subject to the Mozilla Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * The Original Code is the MPI Arbitrary Precision Integer Arithmetic + * library. + * + * The Initial Developer of the Original Code is Michael J. Fromberger. + * Portions created by Michael J. Fromberger are + * Copyright (C) 1998, 1999, 2000 Michael J. Fromberger. + * All Rights Reserved. + * + * Contributor(s): + * Netscape Communications Corporation + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License Version 2 or later (the + * "GPL"), in which case the provisions of the GPL are applicable + * instead of those above. If you wish to allow use of your + * version of this file only under the terms of the GPL and not to + * allow others to use your version of this file under the MPL, + * indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by + * the GPL. If you do not delete the provisions above, a recipient + * may use your version of this file under either the MPL or the GPL. + * + * $Id$ + */ +#ifndef _MPI_PRIV_H_ +#define _MPI_PRIV_H_ 1 + +#include "mpi.h" +#include <stdlib.h> +#include <string.h> +#include <ctype.h> + +#if MP_DEBUG +#include <stdio.h> + +#define DIAG(T,V) {fprintf(stderr,T);mp_print(V,stderr);fputc('\n',stderr);} +#else +#define DIAG(T,V) +#endif + +/* If we aren't using a wired-in logarithm table, we need to include + the math library to get the log() function + */ + +/* {{{ s_logv_2[] - log table for 2 in various bases */ + +#if MP_LOGTAB +/* + A table of the logs of 2 for various bases (the 0 and 1 entries of + this table are meaningless and should not be referenced). + + This table is used to compute output lengths for the mp_toradix() + function. Since a number n in radix r takes up about log_r(n) + digits, we estimate the output size by taking the least integer + greater than log_r(n), where: + + log_r(n) = log_2(n) * log_r(2) + + This table, therefore, is a table of log_r(2) for 2 <= r <= 36, + which are the output bases supported. + */ + +extern const float s_logv_2[]; +#define LOG_V_2(R) s_logv_2[(R)] + +#else + +/* + If MP_LOGTAB is not defined, use the math library to compute the + logarithms on the fly. Otherwise, use the table. + Pick which works best for your system. + */ + +#include <math.h> +#define LOG_V_2(R) (log(2.0)/log(R)) + +#endif /* if MP_LOGTAB */ + +/* }}} */ + +/* {{{ Digit arithmetic macros */ + +/* + When adding and multiplying digits, the results can be larger than + can be contained in an mp_digit. Thus, an mp_word is used. These + macros mask off the upper and lower digits of the mp_word (the + mp_word may be more than 2 mp_digits wide, but we only concern + ourselves with the low-order 2 mp_digits) + */ + +#define CARRYOUT(W) (mp_digit)((W)>>DIGIT_BIT) +#define ACCUM(W) (mp_digit)(W) + +#define MP_MIN(a,b) (((a) < (b)) ? (a) : (b)) +#define MP_MAX(a,b) (((a) > (b)) ? (a) : (b)) +#define MP_HOWMANY(a,b) (((a) + (b) - 1)/(b)) +#define MP_ROUNDUP(a,b) (MP_HOWMANY(a,b) * (b)) + +/* }}} */ + +/* {{{ Comparison constants */ + +#define MP_LT -1 +#define MP_EQ 0 +#define MP_GT 1 + +/* }}} */ + +/* {{{ private function declarations */ + +/* + If MP_MACRO is false, these will be defined as actual functions; + otherwise, suitable macro definitions will be used. This works + around the fact that ANSI C89 doesn't support an 'inline' keyword + (although I hear C9x will ... about bloody time). At present, the + macro definitions are identical to the function bodies, but they'll + expand in place, instead of generating a function call. + + I chose these particular functions to be made into macros because + some profiling showed they are called a lot on a typical workload, + and yet they are primarily housekeeping. + */ +#if MP_MACRO == 0 + void s_mp_setz(mp_digit *dp, mp_size count); /* zero digits */ + void s_mp_copy(const mp_digit *sp, mp_digit *dp, mp_size count); /* copy */ + void *s_mp_alloc(size_t nb, size_t ni); /* general allocator */ + void s_mp_free(void *ptr); /* general free function */ +extern unsigned long mp_allocs; +extern unsigned long mp_frees; +extern unsigned long mp_copies; +#else + + /* Even if these are defined as macros, we need to respect the settings + of the MP_MEMSET and MP_MEMCPY configuration options... + */ + #if MP_MEMSET == 0 + #define s_mp_setz(dp, count) \ + {int ix;for(ix=0;ix<(count);ix++)(dp)[ix]=0;} + #else + #define s_mp_setz(dp, count) memset(dp, 0, (count) * sizeof(mp_digit)) + #endif /* MP_MEMSET */ + + #if MP_MEMCPY == 0 + #define s_mp_copy(sp, dp, count) \ + {int ix;for(ix=0;ix<(count);ix++)(dp)[ix]=(sp)[ix];} + #else + #define s_mp_copy(sp, dp, count) memcpy(dp, sp, (count) * sizeof(mp_digit)) + #endif /* MP_MEMCPY */ + + #define s_mp_alloc(nb, ni) calloc(nb, ni) + #define s_mp_free(ptr) {if(ptr) free(ptr);} +#endif /* MP_MACRO */ + +mp_err s_mp_grow(mp_int *mp, mp_size min); /* increase allocated size */ +mp_err s_mp_pad(mp_int *mp, mp_size min); /* left pad with zeroes */ + +#if MP_MACRO == 0 + void s_mp_clamp(mp_int *mp); /* clip leading zeroes */ +#else + #define s_mp_clamp(mp)\ + { mp_size used = MP_USED(mp); \ + while (used > 1 && DIGIT(mp, used - 1) == 0) --used; \ + MP_USED(mp) = used; \ + } +#endif /* MP_MACRO */ + +void s_mp_exch(mp_int *a, mp_int *b); /* swap a and b in place */ + +mp_err s_mp_lshd(mp_int *mp, mp_size p); /* left-shift by p digits */ +void s_mp_rshd(mp_int *mp, mp_size p); /* right-shift by p digits */ +mp_err s_mp_mul_2d(mp_int *mp, mp_digit d); /* multiply by 2^d in place */ +void s_mp_div_2d(mp_int *mp, mp_digit d); /* divide by 2^d in place */ +void s_mp_mod_2d(mp_int *mp, mp_digit d); /* modulo 2^d in place */ +void s_mp_div_2(mp_int *mp); /* divide by 2 in place */ +mp_err s_mp_mul_2(mp_int *mp); /* multiply by 2 in place */ +mp_err s_mp_norm(mp_int *a, mp_int *b, mp_digit *pd); + /* normalize for division */ +mp_err s_mp_add_d(mp_int *mp, mp_digit d); /* unsigned digit addition */ +mp_err s_mp_sub_d(mp_int *mp, mp_digit d); /* unsigned digit subtract */ +mp_err s_mp_mul_d(mp_int *mp, mp_digit d); /* unsigned digit multiply */ +mp_err s_mp_div_d(mp_int *mp, mp_digit d, mp_digit *r); + /* unsigned digit divide */ +mp_err s_mp_reduce(mp_int *x, const mp_int *m, const mp_int *mu); + /* Barrett reduction */ +mp_err s_mp_add(mp_int *a, const mp_int *b); /* magnitude addition */ +mp_err s_mp_add_3arg(const mp_int *a, const mp_int *b, mp_int *c); +mp_err s_mp_sub(mp_int *a, const mp_int *b); /* magnitude subtract */ +mp_err s_mp_sub_3arg(const mp_int *a, const mp_int *b, mp_int *c); +mp_err s_mp_add_offset(mp_int *a, mp_int *b, mp_size offset); + /* a += b * RADIX^offset */ +mp_err s_mp_mul(mp_int *a, const mp_int *b); /* magnitude multiply */ +#if MP_SQUARE +mp_err s_mp_sqr(mp_int *a); /* magnitude square */ +#else +#define s_mp_sqr(a) s_mp_mul(a, a) +#endif +mp_err s_mp_div(mp_int *rem, mp_int *div, mp_int *quot); /* magnitude div */ +mp_err s_mp_exptmod(const mp_int *a, const mp_int *b, const mp_int *m, mp_int *c); +mp_err s_mp_2expt(mp_int *a, mp_digit k); /* a = 2^k */ +int s_mp_cmp(const mp_int *a, const mp_int *b); /* magnitude comparison */ +int s_mp_cmp_d(const mp_int *a, mp_digit d); /* magnitude digit compare */ +int s_mp_ispow2(const mp_int *v); /* is v a power of 2? */ +int s_mp_ispow2d(mp_digit d); /* is d a power of 2? */ + +int s_mp_tovalue(char ch, int r); /* convert ch to value */ +char s_mp_todigit(mp_digit val, int r, int low); /* convert val to digit */ +int s_mp_outlen(int bits, int r); /* output length in bytes */ +mp_digit s_mp_invmod_radix(mp_digit P); /* returns (P ** -1) mod RADIX */ +mp_err s_mp_invmod_odd_m( const mp_int *a, const mp_int *m, mp_int *c); +mp_err s_mp_invmod_2d( const mp_int *a, mp_size k, mp_int *c); +mp_err s_mp_invmod_even_m(const mp_int *a, const mp_int *m, mp_int *c); + +/* ------ mpv functions, operate on arrays of digits, not on mp_int's ------ */ +#if defined (__OS2__) && defined (__IBMC__) +#define MPI_ASM_DECL __cdecl +#else +#define MPI_ASM_DECL +#endif + +void MPI_ASM_DECL s_mpv_mul_d(const mp_digit *a, mp_size a_len, + mp_digit b, mp_digit *c); +void MPI_ASM_DECL s_mpv_mul_d_add(const mp_digit *a, mp_size a_len, + mp_digit b, mp_digit *c); +void MPI_ASM_DECL s_mpv_mul_d_add_prop(const mp_digit *a, + mp_size a_len, mp_digit b, + mp_digit *c); +void MPI_ASM_DECL s_mpv_sqr_add_prop(const mp_digit *a, + mp_size a_len, + mp_digit *sqrs); + +mp_err MPI_ASM_DECL s_mpv_div_2dx1d(mp_digit Nhi, mp_digit Nlo, + mp_digit divisor, mp_digit *quot, mp_digit *rem); + +/* c += a * b * (MP_RADIX ** offset); */ +#define s_mp_mul_d_add_offset(a, b, c, off) \ +(s_mpv_mul_d_add_prop(MP_DIGITS(a), MP_USED(a), b, MP_DIGITS(c) + off), MP_OKAY) + +/* }}} */ +#endif + |