diff options
Diffstat (limited to 'security/nss/lib/freebl/mpi/mpi-priv.h')
-rw-r--r-- | security/nss/lib/freebl/mpi/mpi-priv.h | 285 |
1 files changed, 0 insertions, 285 deletions
diff --git a/security/nss/lib/freebl/mpi/mpi-priv.h b/security/nss/lib/freebl/mpi/mpi-priv.h deleted file mode 100644 index 0e56fb4f0..000000000 --- a/security/nss/lib/freebl/mpi/mpi-priv.h +++ /dev/null @@ -1,285 +0,0 @@ -/* - * mpi-priv.h - Private header file for MPI - * Arbitrary precision integer arithmetic library - * - * NOTE WELL: the content of this header file is NOT part of the "public" - * API for the MPI library, and may change at any time. - * Application programs that use libmpi should NOT include this header file. - * - * This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ -/* $Id$ */ -#ifndef _MPI_PRIV_H_ -#define _MPI_PRIV_H_ 1 - -#include "mpi.h" -#include <stdlib.h> -#include <string.h> -#include <ctype.h> - -#if MP_DEBUG -#include <stdio.h> - -#define DIAG(T,V) {fprintf(stderr,T);mp_print(V,stderr);fputc('\n',stderr);} -#else -#define DIAG(T,V) -#endif - -/* If we aren't using a wired-in logarithm table, we need to include - the math library to get the log() function - */ - -/* {{{ s_logv_2[] - log table for 2 in various bases */ - -#if MP_LOGTAB -/* - A table of the logs of 2 for various bases (the 0 and 1 entries of - this table are meaningless and should not be referenced). - - This table is used to compute output lengths for the mp_toradix() - function. Since a number n in radix r takes up about log_r(n) - digits, we estimate the output size by taking the least integer - greater than log_r(n), where: - - log_r(n) = log_2(n) * log_r(2) - - This table, therefore, is a table of log_r(2) for 2 <= r <= 36, - which are the output bases supported. - */ - -extern const float s_logv_2[]; -#define LOG_V_2(R) s_logv_2[(R)] - -#else - -/* - If MP_LOGTAB is not defined, use the math library to compute the - logarithms on the fly. Otherwise, use the table. - Pick which works best for your system. - */ - -#include <math.h> -#define LOG_V_2(R) (log(2.0)/log(R)) - -#endif /* if MP_LOGTAB */ - -/* }}} */ - -/* {{{ Digit arithmetic macros */ - -/* - When adding and multiplying digits, the results can be larger than - can be contained in an mp_digit. Thus, an mp_word is used. These - macros mask off the upper and lower digits of the mp_word (the - mp_word may be more than 2 mp_digits wide, but we only concern - ourselves with the low-order 2 mp_digits) - */ - -#define CARRYOUT(W) (mp_digit)((W)>>DIGIT_BIT) -#define ACCUM(W) (mp_digit)(W) - -#define MP_MIN(a,b) (((a) < (b)) ? (a) : (b)) -#define MP_MAX(a,b) (((a) > (b)) ? (a) : (b)) -#define MP_HOWMANY(a,b) (((a) + (b) - 1)/(b)) -#define MP_ROUNDUP(a,b) (MP_HOWMANY(a,b) * (b)) - -/* }}} */ - -/* {{{ Comparison constants */ - -#define MP_LT -1 -#define MP_EQ 0 -#define MP_GT 1 - -/* }}} */ - -/* {{{ private function declarations */ - -/* - If MP_MACRO is false, these will be defined as actual functions; - otherwise, suitable macro definitions will be used. This works - around the fact that ANSI C89 doesn't support an 'inline' keyword - (although I hear C9x will ... about bloody time). At present, the - macro definitions are identical to the function bodies, but they'll - expand in place, instead of generating a function call. - - I chose these particular functions to be made into macros because - some profiling showed they are called a lot on a typical workload, - and yet they are primarily housekeeping. - */ -#if MP_MACRO == 0 - void s_mp_setz(mp_digit *dp, mp_size count); /* zero digits */ - void s_mp_copy(const mp_digit *sp, mp_digit *dp, mp_size count); /* copy */ - void *s_mp_alloc(size_t nb, size_t ni); /* general allocator */ - void s_mp_free(void *ptr); /* general free function */ -extern unsigned long mp_allocs; -extern unsigned long mp_frees; -extern unsigned long mp_copies; -#else - - /* Even if these are defined as macros, we need to respect the settings - of the MP_MEMSET and MP_MEMCPY configuration options... - */ - #if MP_MEMSET == 0 - #define s_mp_setz(dp, count) \ - {int ix;for(ix=0;ix<(count);ix++)(dp)[ix]=0;} - #else - #define s_mp_setz(dp, count) memset(dp, 0, (count) * sizeof(mp_digit)) - #endif /* MP_MEMSET */ - - #if MP_MEMCPY == 0 - #define s_mp_copy(sp, dp, count) \ - {int ix;for(ix=0;ix<(count);ix++)(dp)[ix]=(sp)[ix];} - #else - #define s_mp_copy(sp, dp, count) memcpy(dp, sp, (count) * sizeof(mp_digit)) - #endif /* MP_MEMCPY */ - - #define s_mp_alloc(nb, ni) calloc(nb, ni) - #define s_mp_free(ptr) {if(ptr) free(ptr);} -#endif /* MP_MACRO */ - -mp_err s_mp_grow(mp_int *mp, mp_size min); /* increase allocated size */ -mp_err s_mp_pad(mp_int *mp, mp_size min); /* left pad with zeroes */ - -#if MP_MACRO == 0 - void s_mp_clamp(mp_int *mp); /* clip leading zeroes */ -#else - #define s_mp_clamp(mp)\ - { mp_size used = MP_USED(mp); \ - while (used > 1 && DIGIT(mp, used - 1) == 0) --used; \ - MP_USED(mp) = used; \ - } -#endif /* MP_MACRO */ - -void s_mp_exch(mp_int *a, mp_int *b); /* swap a and b in place */ - -mp_err s_mp_lshd(mp_int *mp, mp_size p); /* left-shift by p digits */ -void s_mp_rshd(mp_int *mp, mp_size p); /* right-shift by p digits */ -mp_err s_mp_mul_2d(mp_int *mp, mp_digit d); /* multiply by 2^d in place */ -void s_mp_div_2d(mp_int *mp, mp_digit d); /* divide by 2^d in place */ -void s_mp_mod_2d(mp_int *mp, mp_digit d); /* modulo 2^d in place */ -void s_mp_div_2(mp_int *mp); /* divide by 2 in place */ -mp_err s_mp_mul_2(mp_int *mp); /* multiply by 2 in place */ -mp_err s_mp_norm(mp_int *a, mp_int *b, mp_digit *pd); - /* normalize for division */ -mp_err s_mp_add_d(mp_int *mp, mp_digit d); /* unsigned digit addition */ -mp_err s_mp_sub_d(mp_int *mp, mp_digit d); /* unsigned digit subtract */ -mp_err s_mp_mul_d(mp_int *mp, mp_digit d); /* unsigned digit multiply */ -mp_err s_mp_div_d(mp_int *mp, mp_digit d, mp_digit *r); - /* unsigned digit divide */ -mp_err s_mp_reduce(mp_int *x, const mp_int *m, const mp_int *mu); - /* Barrett reduction */ -mp_err s_mp_add(mp_int *a, const mp_int *b); /* magnitude addition */ -mp_err s_mp_add_3arg(const mp_int *a, const mp_int *b, mp_int *c); -mp_err s_mp_sub(mp_int *a, const mp_int *b); /* magnitude subtract */ -mp_err s_mp_sub_3arg(const mp_int *a, const mp_int *b, mp_int *c); -mp_err s_mp_add_offset(mp_int *a, mp_int *b, mp_size offset); - /* a += b * RADIX^offset */ -mp_err s_mp_mul(mp_int *a, const mp_int *b); /* magnitude multiply */ -#if MP_SQUARE -mp_err s_mp_sqr(mp_int *a); /* magnitude square */ -#else -#define s_mp_sqr(a) s_mp_mul(a, a) -#endif -mp_err s_mp_div(mp_int *rem, mp_int *div, mp_int *quot); /* magnitude div */ -mp_err s_mp_exptmod(const mp_int *a, const mp_int *b, const mp_int *m, mp_int *c); -mp_err s_mp_2expt(mp_int *a, mp_digit k); /* a = 2^k */ -int s_mp_cmp(const mp_int *a, const mp_int *b); /* magnitude comparison */ -int s_mp_cmp_d(const mp_int *a, mp_digit d); /* magnitude digit compare */ -int s_mp_ispow2(const mp_int *v); /* is v a power of 2? */ -int s_mp_ispow2d(mp_digit d); /* is d a power of 2? */ - -int s_mp_tovalue(char ch, int r); /* convert ch to value */ -char s_mp_todigit(mp_digit val, int r, int low); /* convert val to digit */ -int s_mp_outlen(int bits, int r); /* output length in bytes */ -mp_digit s_mp_invmod_radix(mp_digit P); /* returns (P ** -1) mod RADIX */ -mp_err s_mp_invmod_odd_m( const mp_int *a, const mp_int *m, mp_int *c); -mp_err s_mp_invmod_2d( const mp_int *a, mp_size k, mp_int *c); -mp_err s_mp_invmod_even_m(const mp_int *a, const mp_int *m, mp_int *c); - -#ifdef NSS_USE_COMBA - -#define IS_POWER_OF_2(a) ((a) && !((a) & ((a)-1))) - -void s_mp_mul_comba_4(const mp_int *A, const mp_int *B, mp_int *C); -void s_mp_mul_comba_8(const mp_int *A, const mp_int *B, mp_int *C); -void s_mp_mul_comba_16(const mp_int *A, const mp_int *B, mp_int *C); -void s_mp_mul_comba_32(const mp_int *A, const mp_int *B, mp_int *C); - -void s_mp_sqr_comba_4(const mp_int *A, mp_int *B); -void s_mp_sqr_comba_8(const mp_int *A, mp_int *B); -void s_mp_sqr_comba_16(const mp_int *A, mp_int *B); -void s_mp_sqr_comba_32(const mp_int *A, mp_int *B); - -#endif /* end NSS_USE_COMBA */ - -/* ------ mpv functions, operate on arrays of digits, not on mp_int's ------ */ -#if defined (__OS2__) && defined (__IBMC__) -#define MPI_ASM_DECL __cdecl -#else -#define MPI_ASM_DECL -#endif - -#ifdef MPI_AMD64 - -mp_digit MPI_ASM_DECL s_mpv_mul_set_vec64(mp_digit*, mp_digit *, mp_size, mp_digit); -mp_digit MPI_ASM_DECL s_mpv_mul_add_vec64(mp_digit*, const mp_digit*, mp_size, mp_digit); - -/* c = a * b */ -#define s_mpv_mul_d(a, a_len, b, c) \ - ((mp_digit *)c)[a_len] = s_mpv_mul_set_vec64(c, a, a_len, b) - -/* c += a * b */ -#define s_mpv_mul_d_add(a, a_len, b, c) \ - ((mp_digit *)c)[a_len] = s_mpv_mul_add_vec64(c, a, a_len, b) - - -#else - -void MPI_ASM_DECL s_mpv_mul_d(const mp_digit *a, mp_size a_len, - mp_digit b, mp_digit *c); -void MPI_ASM_DECL s_mpv_mul_d_add(const mp_digit *a, mp_size a_len, - mp_digit b, mp_digit *c); - -#endif - -void MPI_ASM_DECL s_mpv_mul_d_add_prop(const mp_digit *a, - mp_size a_len, mp_digit b, - mp_digit *c); -void MPI_ASM_DECL s_mpv_sqr_add_prop(const mp_digit *a, - mp_size a_len, - mp_digit *sqrs); - -mp_err MPI_ASM_DECL s_mpv_div_2dx1d(mp_digit Nhi, mp_digit Nlo, - mp_digit divisor, mp_digit *quot, mp_digit *rem); - -/* c += a * b * (MP_RADIX ** offset); */ -#define s_mp_mul_d_add_offset(a, b, c, off) \ -(s_mpv_mul_d_add_prop(MP_DIGITS(a), MP_USED(a), b, MP_DIGITS(c) + off), MP_OKAY) - -typedef struct { - mp_int N; /* modulus N */ - mp_digit n0prime; /* n0' = - (n0 ** -1) mod MP_RADIX */ -} mp_mont_modulus; - -mp_err s_mp_mul_mont(const mp_int *a, const mp_int *b, mp_int *c, - mp_mont_modulus *mmm); -mp_err s_mp_redc(mp_int *T, mp_mont_modulus *mmm); - -/* - * s_mpi_getProcessorLineSize() returns the size in bytes of the cache line - * if a cache exists, or zero if there is no cache. If more than one - * cache line exists, it should return the smallest line size (which is - * usually the L1 cache). - * - * mp_modexp uses this information to make sure that private key information - * isn't being leaked through the cache. - * - * see mpcpucache.c for the implementation. - */ -unsigned long s_mpi_getProcessorLineSize(); - -/* }}} */ -#endif - |