diff options
Diffstat (limited to 'security/nss/lib/pk11wrap/pk11util.c')
-rw-r--r-- | security/nss/lib/pk11wrap/pk11util.c | 518 |
1 files changed, 0 insertions, 518 deletions
diff --git a/security/nss/lib/pk11wrap/pk11util.c b/security/nss/lib/pk11wrap/pk11util.c deleted file mode 100644 index 709bf32c8..000000000 --- a/security/nss/lib/pk11wrap/pk11util.c +++ /dev/null @@ -1,518 +0,0 @@ -/* - * The contents of this file are subject to the Mozilla Public - * License Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. You may obtain a copy of - * the License at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS - * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - * implied. See the License for the specific language governing - * rights and limitations under the License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is Netscape - * Communications Corporation. Portions created by Netscape are - * Copyright (C) 1994-2000 Netscape Communications Corporation. All - * Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License Version 2 or later (the - * "GPL"), in which case the provisions of the GPL are applicable - * instead of those above. If you wish to allow use of your - * version of this file only under the terms of the GPL and not to - * allow others to use your version of this file under the MPL, - * indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by - * the GPL. If you do not delete the provisions above, a recipient - * may use your version of this file under either the MPL or the - * GPL. - */ -/* - * Initialize the PCKS 11 subsystem - */ -#include "seccomon.h" -#include "secmod.h" -#include "prlock.h" -#include "secmodi.h" -#include "pk11func.h" - -/* these are for displaying error messages */ - -static SECMODModuleList *modules = NULL; -static SECMODModule *internalModule = NULL; -static SECMODListLock *moduleLock = NULL; - -extern SECStatus -PK11_UpdateSlotAttribute(PK11SlotInfo *slot, PK11DefaultArrayEntry *entry, - PRBool add); - - -extern int XP_SEC_MODULE_NO_LIB; - -extern PK11DefaultArrayEntry PK11_DefaultArray[]; -extern int num_pk11_default_mechanisms; - -void SECMOD_init(char *dbname) { - SECMODModuleList *thisModule; - int found=0; - SECStatus rv = SECFailure; - - - /* don't initialize twice */ - if (modules) return; - - PK11_InitSlotLists(); - - SECMOD_InitDB(dbname); - - /* - * read in the current modules from the database - */ - modules = SECMOD_ReadPermDB(); - - /* make sure that the internal module is loaded */ - for (thisModule = modules; thisModule ; thisModule = thisModule->next) { - if (thisModule->module->internal) { - found++; - internalModule = SECMOD_ReferenceModule(thisModule->module); - break; - } - } - - if (!found) { - thisModule = modules; - modules = SECMOD_NewModuleListElement(); - modules->module = SECMOD_NewInternal(); - PORT_Assert(modules->module != NULL); - modules->next = thisModule; - SECMOD_AddPermDB(modules->module); - internalModule = SECMOD_ReferenceModule(modules->module); - } - - /* load it first... we need it to verify the external modules - * which we are loading.... */ - rv = SECMOD_LoadModule(internalModule); - if( rv != SECSuccess ) - internalModule = NULL; - - /* Load each new module */ - for (thisModule = modules; thisModule ; thisModule = thisModule->next) { - if( !( thisModule->module->internal ) ) - SECMOD_LoadModule(thisModule->module); - } - - moduleLock = SECMOD_NewListLock(); -} - -/* - * retrieve the internal module - */ -SECMODModule * -SECMOD_GetInternalModule(void) { - return internalModule; -} - -/* called from security/cmd/swfort/instinit, which doesn't need a full - * security LIBRARY (it used the swfortezza code, but it does have to verify - * cert chains against it's own list of certs. We need to initialize the - * security code without any database. - */ -void -secmod_GetInternalModule( SECMODModule *mod) { - internalModule = SECMOD_ReferenceModule(mod); -} - -/* - * get the list of PKCS11 modules that are available. - */ -SECMODModuleList *SECMOD_GetDefaultModuleList() { return modules; } -SECMODListLock *SECMOD_GetDefaultModuleListLock() { return moduleLock; } - - - -/* - * find a module by name, and add a reference to it. - * return that module. - */ -SECMODModule *SECMOD_FindModule(char *name) { - SECMODModuleList *mlp; - SECMODModule *module = NULL; - - SECMOD_GetReadLock(moduleLock); - for(mlp = modules; mlp != NULL; mlp = mlp->next) { - if (PORT_Strcmp(name,mlp->module->commonName) == 0) { - module = mlp->module; - SECMOD_ReferenceModule(module); - break; - } - } - SECMOD_ReleaseReadLock(moduleLock); - - return module; -} - -/* - * find a module by ID, and add a reference to it. - * return that module. - */ -SECMODModule *SECMOD_FindModuleByID(SECMODModuleID id) { - SECMODModuleList *mlp; - SECMODModule *module = NULL; - - SECMOD_GetReadLock(moduleLock); - for(mlp = modules; mlp != NULL; mlp = mlp->next) { - if (id == mlp->module->moduleID) { - module = mlp->module; - SECMOD_ReferenceModule(module); - break; - } - } - SECMOD_ReleaseReadLock(moduleLock); - - return module; -} - -/* - * lookup the Slot module based on it's module ID and slot ID. - */ -PK11SlotInfo *SECMOD_LookupSlot(SECMODModuleID moduleID,CK_SLOT_ID slotID) { - int i; - SECMODModule *module; - - module = SECMOD_FindModuleByID(moduleID); - if (module == NULL) return NULL; - - for (i=0; i < module->slotCount; i++) { - PK11SlotInfo *slot = module->slots[i]; - - if (slot->slotID == slotID) { - SECMOD_DestroyModule(module); - return PK11_ReferenceSlot(slot); - } - } - SECMOD_DestroyModule(module); - return NULL; -} - - -/* - * find a module by name and delete it of the module list - */ -SECStatus -SECMOD_DeleteModule(char *name, int *type) { - SECMODModuleList *mlp; - SECMODModuleList **mlpp; - SECStatus rv = SECFailure; - - - *type = SECMOD_EXTERNAL; - - SECMOD_GetWriteLock(moduleLock); - for(mlpp = &modules,mlp = modules; - mlp != NULL; mlpp = &mlp->next, mlp = *mlpp) { - if (PORT_Strcmp(name,mlp->module->commonName) == 0) { - /* don't delete the internal module */ - if (!mlp->module->internal) { - SECMOD_RemoveList(mlpp,mlp); - /* delete it after we release the lock */ - rv = SECSuccess; - } else if (mlp->module->isFIPS) { - *type = SECMOD_FIPS; - } else { - *type = SECMOD_INTERNAL; - } - break; - } - } - SECMOD_ReleaseWriteLock(moduleLock); - - - if (rv == SECSuccess) { - SECMOD_DeletePermDB(mlp->module); - SECMOD_DestroyModuleListElement(mlp); - } - return rv; -} - -/* - * find a module by name and delete it of the module list - */ -SECStatus -SECMOD_DeleteInternalModule(char *name) { - SECMODModuleList *mlp; - SECMODModuleList **mlpp; - SECStatus rv = SECFailure; - - SECMOD_GetWriteLock(moduleLock); - for(mlpp = &modules,mlp = modules; - mlp != NULL; mlpp = &mlp->next, mlp = *mlpp) { - if (PORT_Strcmp(name,mlp->module->commonName) == 0) { - /* don't delete the internal module */ - if (mlp->module->internal) { - rv = SECSuccess; - SECMOD_RemoveList(mlpp,mlp); - } - break; - } - } - SECMOD_ReleaseWriteLock(moduleLock); - - if (rv == SECSuccess) { - SECMODModule *newModule,*oldModule; - - if (mlp->module->isFIPS) { - newModule = SECMOD_NewInternal(); - } else { - newModule = SECMOD_GetFIPSInternal(); - } - if (newModule == NULL) { - SECMODModuleList *last,*mlp2; - /* we're in pretty deep trouble if this happens...Security - * not going to work well... try to put the old module back on - * the list */ - SECMOD_GetWriteLock(moduleLock); - for(mlp2 = modules; mlp2 != NULL; mlp2 = mlp->next) { - last = mlp2; - } - - if (last == NULL) { - modules = mlp; - } else { - SECMOD_AddList(last,mlp,NULL); - } - SECMOD_ReleaseWriteLock(moduleLock); - return SECFailure; - } - oldModule = internalModule; - internalModule = SECMOD_ReferenceModule(newModule); - SECMOD_AddModule(internalModule); - SECMOD_DestroyModule(oldModule); - SECMOD_DeletePermDB(mlp->module); - SECMOD_DestroyModuleListElement(mlp); - } - return rv; -} - -SECStatus -SECMOD_AddModule(SECMODModule *newModule) { - SECStatus rv; - SECMODModuleList *mlp, *newListElement, *last = NULL; - - /* Test if a module w/ the same name already exists */ - /* and return SECWouldBlock if so. */ - /* We should probably add a new return value such as */ - /* SECDublicateModule, but to minimize ripples, I'll */ - /* give SECWouldBlock a new meaning */ - if (SECMOD_FindModule(newModule->commonName)) { - return SECWouldBlock; - /* module already exists. */ - } - - rv = SECMOD_LoadModule(newModule); - if (rv != SECSuccess) { - return rv; - } - - newListElement = SECMOD_NewModuleListElement(); - if (newListElement == NULL) { - return SECFailure; - } - - SECMOD_AddPermDB(newModule); - - newListElement->module = newModule; - - SECMOD_GetWriteLock(moduleLock); - /* Added it to the end (This is very inefficient, but Adding a module - * on the fly should happen maybe 2-3 times through the life this program - * on a given computer, and this list should be *SHORT*. */ - for(mlp = modules; mlp != NULL; mlp = mlp->next) { - last = mlp; - } - - if (last == NULL) { - modules = newListElement; - } else { - SECMOD_AddList(last,newListElement,NULL); - } - SECMOD_ReleaseWriteLock(moduleLock); - return SECSuccess; -} - -PK11SlotInfo *SECMOD_FindSlot(SECMODModule *module,char *name) { - int i; - char *string; - - for (i=0; i < module->slotCount; i++) { - PK11SlotInfo *slot = module->slots[i]; - - if (PK11_IsPresent(slot)) { - string = PK11_GetTokenName(slot); - } else { - string = PK11_GetSlotName(slot); - } - if (PORT_Strcmp(name,string) == 0) { - return PK11_ReferenceSlot(slot); - } - } - return NULL; -} - -SECStatus -PK11_GetModInfo(SECMODModule *mod,CK_INFO *info) { - CK_RV crv; - - if (mod->functionList == NULL) return SECFailure; - crv = PK11_GETTAB(mod)->C_GetInfo(info); - return (crv == CKR_OK) ? SECSuccess : SECFailure; -} - -/* Determine if we have the FIP's module loaded as the default - * module to trigger other bogus FIPS requirements in PKCS #12 and - * SSL - */ -PRBool -PK11_IsFIPS(void) -{ - SECMODModule *mod = SECMOD_GetInternalModule(); - - if (mod && mod->internal) { - return mod->isFIPS; - } - - return PR_FALSE; -} - -/* combines NewModule() & AddModule */ -/* give a string for the module name & the full-path for the dll, */ -/* installs the PKCS11 module & update registry */ -SECStatus SECMOD_AddNewModule(char* moduleName, char* dllPath, - unsigned long defaultMechanismFlags, - unsigned long cipherEnableFlags) { - SECMODModule *module; - SECStatus result; - int s,i; - PK11SlotInfo* slot; - - module = SECMOD_NewModule(); - - if (moduleName) { - module->commonName=PORT_ArenaStrdup(module->arena,moduleName); - } else { - module->commonName=NULL; - } - - if (dllPath) { - module->dllName=PORT_ArenaStrdup(module->arena,dllPath); - } else { - module->dllName=NULL; - } - - if (module->dllName != NULL) { - if (module->dllName[0] != 0) { - SECStatus rv = SECMOD_AddModule(module); - if (rv != SECSuccess) { - /* SECFailure: failed to add module, corrupt or missing module etc. */ - /* SECBlock: a module with the same name already exists */ - return rv; - } else { /* successfully added module */ - /* turn on SSL cipher enable flags */ - module->ssl[0] = cipherEnableFlags; - - /* check each slot to turn on appropriate mechanisms */ - for (s = 0; s < module->slotCount; s++) { - slot = (module->slots)[s]; - /* for each possible mechanism */ - for (i=0; i < num_pk11_default_mechanisms; i++) { - /* we are told to turn it on by default ? */ - if (PK11_DefaultArray[i].flag & defaultMechanismFlags) { - /* it ignores if slot attribute update failes */ - result = PK11_UpdateSlotAttribute(slot, &(PK11_DefaultArray[i]), PR_TRUE); - } else { /* turn this mechanism of the slot off by default */ - result = PK11_UpdateSlotAttribute(slot, &(PK11_DefaultArray[i]), PR_FALSE); - } - } /* for each mechanism */ - /* disable each slot if the defaultFlags say so */ - if (defaultMechanismFlags & PK11_DISABLE_FLAG) { - PK11_UserDisableSlot(slot); - } - } /* for each slot of this module */ - - /* delete and re-add module in order to save changes to the module */ - result = SECMOD_DeletePermDB(module); - - if (result == SECSuccess) { - result = SECMOD_AddPermDB(module); - if (result == SECSuccess) { - return SECSuccess; - } - } - - } - } - } - SECMOD_DestroyModule(module); - return SECFailure; -} - -/* Public & Internal(Security Library) representation of - * encryption mechanism flags conversion */ - -/* Currently, the only difference is that internal representation - * puts RANDOM_FLAG at bit 31 (Most-significant bit), but - * public representation puts this bit at bit 28 - */ -unsigned long SECMOD_PubMechFlagstoInternal(unsigned long publicFlags) { - unsigned long internalFlags = publicFlags; - - if (publicFlags & PUBLIC_MECH_RANDOM_FLAG) { - internalFlags &= ~PUBLIC_MECH_RANDOM_FLAG; - internalFlags |= SECMOD_RANDOM_FLAG; - } - return internalFlags; -} - -unsigned long SECMOD_InternaltoPubMechFlags(unsigned long internalFlags) { - unsigned long publicFlags = internalFlags; - - if (internalFlags & SECMOD_RANDOM_FLAG) { - publicFlags &= ~SECMOD_RANDOM_FLAG; - publicFlags |= PUBLIC_MECH_RANDOM_FLAG; - } - return publicFlags; -} - - -/* Public & Internal(Security Library) representation of */ -/* cipher flags conversion */ -/* Note: currently they are just stubs */ -unsigned long SECMOD_PubCipherFlagstoInternal(unsigned long publicFlags) { - return publicFlags; -} - -unsigned long SECMOD_InternaltoPubCipherFlags(unsigned long internalFlags) { - return internalFlags; -} - -/* Funtion reports true if module of modType is installed/configured */ -PRBool -SECMOD_IsModulePresent( unsigned long int pubCipherEnableFlags ) -{ - PRBool result = PR_FALSE; - SECMODModuleList *mods = SECMOD_GetDefaultModuleList(); - SECMODListLock *modsLock = SECMOD_GetDefaultModuleListLock(); - SECMOD_GetReadLock(moduleLock); - - - for ( ; mods != NULL; mods = mods->next) { - if (mods->module->ssl[0] & SECMOD_PubCipherFlagstoInternal(pubCipherEnableFlags)) { - result = PR_TRUE; - } - } - - SECMOD_ReleaseReadLock(moduleLock); - return result; -} |