diff options
Diffstat (limited to 'security/nss/lib/smime/cmspubkey.c')
| -rw-r--r-- | security/nss/lib/smime/cmspubkey.c | 531 |
1 files changed, 0 insertions, 531 deletions
diff --git a/security/nss/lib/smime/cmspubkey.c b/security/nss/lib/smime/cmspubkey.c deleted file mode 100644 index 043b6cfc1..000000000 --- a/security/nss/lib/smime/cmspubkey.c +++ /dev/null @@ -1,531 +0,0 @@ -/* - * The contents of this file are subject to the Mozilla Public - * License Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. You may obtain a copy of - * the License at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS - * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - * implied. See the License for the specific language governing - * rights and limitations under the License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is Netscape - * Communications Corporation. Portions created by Netscape are - * Copyright (C) 1994-2000 Netscape Communications Corporation. All - * Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License Version 2 or later (the - * "GPL"), in which case the provisions of the GPL are applicable - * instead of those above. If you wish to allow use of your - * version of this file only under the terms of the GPL and not to - * allow others to use your version of this file under the MPL, - * indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by - * the GPL. If you do not delete the provisions above, a recipient - * may use your version of this file under either the MPL or the - * GPL. - */ - -/* - * CMS public key crypto - * - * $Id$ - */ - -#include "cmslocal.h" - -#include "cert.h" -#include "key.h" -#include "secasn1.h" -#include "secitem.h" -#include "secoid.h" -#include "pk11func.h" -#include "secerr.h" - -/* ====== RSA ======================================================================= */ - -/* - * NSS_CMSUtil_EncryptSymKey_RSA - wrap a symmetric key with RSA - * - * this function takes a symmetric key and encrypts it using an RSA public key - * according to PKCS#1 and RFC2633 (S/MIME) - */ -SECStatus -NSS_CMSUtil_EncryptSymKey_RSA(PLArenaPool *poolp, CERTCertificate *cert, PK11SymKey *bulkkey, - SECItem *encKey) -{ - SECOidTag certalgtag; /* the certificate's encryption algorithm */ - SECOidTag encalgtag; /* the algorithm used for key exchange/agreement */ - SECStatus rv; - SECKEYPublicKey *publickey; - int data_len; - void *mark; - - /* sanity check */ - certalgtag = SECOID_GetAlgorithmTag(&(cert->subjectPublicKeyInfo.algorithm)); - PORT_Assert(certalgtag == SEC_OID_PKCS1_RSA_ENCRYPTION); - - encalgtag = SEC_OID_PKCS1_RSA_ENCRYPTION; - publickey = CERT_ExtractPublicKey(cert); - if (publickey == NULL) - goto loser; - - mark = PORT_ArenaMark(poolp); - - /* allocate memory for the encrypted key */ - data_len = SECKEY_PublicKeyStrength(publickey); /* block size (assumed to be > keylen) */ - encKey->data = (unsigned char*)PORT_ArenaAlloc(poolp, data_len); - encKey->len = data_len; - if (encKey->data == NULL) - goto loser; - - /* encrypt the key now */ - rv = PK11_PubWrapSymKey(PK11_AlgtagToMechanism(SEC_OID_PKCS1_RSA_ENCRYPTION), - publickey, bulkkey, encKey); - - SECKEY_DestroyPublicKey(publickey); - if (rv != SECSuccess) - goto loser; - - PORT_ArenaUnmark(poolp, mark); - return SECSuccess; - -loser: - PORT_ArenaRelease(poolp, mark); - return SECFailure; -} - -/* - * NSS_CMSUtil_DecryptSymKey_RSA - unwrap a RSA-wrapped symmetric key - * - * this function takes an RSA-wrapped symmetric key and unwraps it, returning a symmetric - * key handle. Please note that the actual unwrapped key data may not be allowed to leave - * a hardware token... - */ -PK11SymKey * -NSS_CMSUtil_DecryptSymKey_RSA(SECKEYPrivateKey *privkey, SECItem *encKey, SECOidTag bulkalgtag) -{ - /* that's easy */ - return PK11_PubUnwrapSymKey(privkey, encKey, PK11_AlgtagToMechanism(bulkalgtag), CKA_DECRYPT, 0); -} - -/* ====== MISSI (Fortezza) ========================================================== */ - -extern const SEC_ASN1Template NSS_SMIMEKEAParamTemplateAllParams[]; - -SECStatus -NSS_CMSUtil_EncryptSymKey_MISSI(PLArenaPool *poolp, CERTCertificate *cert, PK11SymKey *bulkkey, - SECOidTag symalgtag, SECItem *encKey, SECItem **pparams, void *pwfn_arg) -{ - SECOidTag certalgtag; /* the certificate's encryption algorithm */ - SECOidTag encalgtag; /* the algorithm used for key exchange/agreement */ - SECStatus rv = SECFailure; - SECItem *params = NULL; - SECStatus err; - PK11SymKey *tek; - CERTCertificate *ourCert; - SECKEYPublicKey *ourPubKey, *publickey = NULL; - SECKEYPrivateKey *ourPrivKey = NULL; - NSSCMSKEATemplateSelector whichKEA; - NSSCMSSMIMEKEAParameters keaParams; - PLArenaPool *arena; - extern const SEC_ASN1Template *nss_cms_get_kea_template(NSSCMSKEATemplateSelector whichTemplate); - - /* Clear keaParams, since cleanup code checks the lengths */ - (void) memset(&keaParams, 0, sizeof(keaParams)); - - certalgtag = SECOID_GetAlgorithmTag(&(cert->subjectPublicKeyInfo.algorithm)); - PORT_Assert(certalgtag == SEC_OID_MISSI_KEA_DSS_OLD || - certalgtag == SEC_OID_MISSI_KEA_DSS || - certalgtag == SEC_OID_MISSI_KEA); - -#define SMIME_FORTEZZA_RA_LENGTH 128 -#define SMIME_FORTEZZA_IV_LENGTH 24 -#define SMIME_FORTEZZA_MAX_KEY_SIZE 256 - - /* We really want to show our KEA tag as the key exchange algorithm tag. */ - encalgtag = SEC_OID_NETSCAPE_SMIME_KEA; - - /* Get the public key of the recipient. */ - publickey = CERT_ExtractPublicKey(cert); - if (publickey == NULL) goto loser; - - /* Find our own cert, and extract its keys. */ - ourCert = PK11_FindBestKEAMatch(cert, pwfn_arg); - if (ourCert == NULL) goto loser; - - arena = PORT_NewArena(1024); - if (arena == NULL) - goto loser; - - ourPubKey = CERT_ExtractPublicKey(ourCert); - if (ourPubKey == NULL) { - CERT_DestroyCertificate(ourCert); - goto loser; - } - - /* While we're here, copy the public key into the outgoing - * KEA parameters. */ - SECITEM_CopyItem(arena, &(keaParams.originatorKEAKey), &(ourPubKey->u.fortezza.KEAKey)); - SECKEY_DestroyPublicKey(ourPubKey); - ourPubKey = NULL; - - /* Extract our private key in order to derive the KEA key. */ - ourPrivKey = PK11_FindKeyByAnyCert(ourCert, pwfn_arg); - CERT_DestroyCertificate(ourCert); /* we're done with this */ - if (!ourPrivKey) - goto loser; - - /* Prepare raItem with 128 bytes (filled with zeros). */ - keaParams.originatorRA.data = (unsigned char *)PORT_ArenaAlloc(arena,SMIME_FORTEZZA_RA_LENGTH); - keaParams.originatorRA.len = SMIME_FORTEZZA_RA_LENGTH; - - /* Generate the TEK (token exchange key) which we use - * to wrap the bulk encryption key. (keaparams.originatorRA) will be - * filled with a random seed which we need to send to - * the recipient. (user keying material in RFC2630/DSA speak) */ - tek = PK11_PubDerive(ourPrivKey, publickey, PR_TRUE, - &keaParams.originatorRA, NULL, - CKM_KEA_KEY_DERIVE, CKM_SKIPJACK_WRAP, - CKA_WRAP, 0, pwfn_arg); - - SECKEY_DestroyPublicKey(publickey); - SECKEY_DestroyPrivateKey(ourPrivKey); - publickey = NULL; - ourPrivKey = NULL; - - if (!tek) - goto loser; - - /* allocate space for the wrapped key data */ - encKey->data = (unsigned char *)PORT_ArenaAlloc(poolp, SMIME_FORTEZZA_MAX_KEY_SIZE); - encKey->len = SMIME_FORTEZZA_MAX_KEY_SIZE; - - if (encKey->data == NULL) { - PK11_FreeSymKey(tek); - goto loser; - } - - /* Wrap the bulk key. What we do with the resulting data - depends on whether we're using Skipjack to wrap the key. */ - switch (PK11_AlgtagToMechanism(symalgtag)) { - case CKM_SKIPJACK_CBC64: - case CKM_SKIPJACK_ECB64: - case CKM_SKIPJACK_OFB64: - case CKM_SKIPJACK_CFB64: - case CKM_SKIPJACK_CFB32: - case CKM_SKIPJACK_CFB16: - case CKM_SKIPJACK_CFB8: - /* SKIPJACK, we use the wrap mechanism because we can do it on the hardware */ - err = PK11_WrapSymKey(CKM_SKIPJACK_WRAP, NULL, tek, bulkkey, encKey); - whichKEA = NSSCMSKEAUsesSkipjack; - break; - default: - /* Not SKIPJACK, we encrypt the raw key data */ - keaParams.nonSkipjackIV.data = - (unsigned char *)PORT_ArenaAlloc(arena, SMIME_FORTEZZA_IV_LENGTH); - keaParams.nonSkipjackIV.len = SMIME_FORTEZZA_IV_LENGTH; - err = PK11_WrapSymKey(CKM_SKIPJACK_CBC64, &keaParams.nonSkipjackIV, tek, bulkkey, encKey); - if (err != SECSuccess) - goto loser; - - if (encKey->len != PK11_GetKeyLength(bulkkey)) { - /* The size of the encrypted key is not the same as - that of the original bulk key, presumably due to - padding. Encode and store the real size of the - bulk key. */ - if (SEC_ASN1EncodeInteger(arena, &keaParams.bulkKeySize, PK11_GetKeyLength(bulkkey)) == NULL) - err = (SECStatus)PORT_GetError(); - else - /* use full template for encoding */ - whichKEA = NSSCMSKEAUsesNonSkipjackWithPaddedEncKey; - } - else - /* enc key length == bulk key length */ - whichKEA = NSSCMSKEAUsesNonSkipjack; - break; - } - - PK11_FreeSymKey(tek); - if (err != SECSuccess) - goto loser; - - /* Encode the KEA parameters into the recipient info. */ - params = SEC_ASN1EncodeItem(poolp, NULL, &keaParams, nss_cms_get_kea_template(whichKEA)); - if (params == NULL) - goto loser; - - /* pass back the algorithm params */ - *pparams = params; - - rv = SECSuccess; - -loser: - if (arena) - PORT_FreeArena(arena, PR_FALSE); - if (publickey) - SECKEY_DestroyPublicKey(publickey); - if (ourPrivKey) - SECKEY_DestroyPrivateKey(ourPrivKey); - return rv; -} - -PK11SymKey * -NSS_CMSUtil_DecryptSymKey_MISSI(SECKEYPrivateKey *privkey, SECItem *encKey, SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg) -{ - /* fortezza: do a key exchange */ - SECStatus err; - CK_MECHANISM_TYPE bulkType; - PK11SymKey *tek; - SECKEYPublicKey *originatorPubKey; - NSSCMSSMIMEKEAParameters keaParams; - PK11SymKey *bulkkey; - int bulkLength; - - (void) memset(&keaParams, 0, sizeof(keaParams)); - - /* NOTE: this uses the SMIME v2 recipientinfo for compatibility. - All additional KEA parameters are DER-encoded in the encryption algorithm parameters */ - - /* Decode the KEA algorithm parameters. */ - err = SEC_ASN1DecodeItem(NULL, &keaParams, NSS_SMIMEKEAParamTemplateAllParams, - &(keyEncAlg->parameters)); - if (err != SECSuccess) - goto loser; - - /* get originator's public key */ - originatorPubKey = PK11_MakeKEAPubKey(keaParams.originatorKEAKey.data, - keaParams.originatorKEAKey.len); - if (originatorPubKey == NULL) - goto loser; - - /* Generate the TEK (token exchange key) which we use to unwrap the bulk encryption key. - The Derive function generates a shared secret and combines it with the originatorRA - data to come up with an unique session key */ - tek = PK11_PubDerive(privkey, originatorPubKey, PR_FALSE, - &keaParams.originatorRA, NULL, - CKM_KEA_KEY_DERIVE, CKM_SKIPJACK_WRAP, - CKA_WRAP, 0, pwfn_arg); - SECKEY_DestroyPublicKey(originatorPubKey); /* not needed anymore */ - if (tek == NULL) - goto loser; - - /* Now that we have the TEK, unwrap the bulk key - with which to decrypt the message. We have to - do one of two different things depending on - whether Skipjack was used for *bulk* encryption - of the message. */ - bulkType = PK11_AlgtagToMechanism(bulkalgtag); - switch (bulkType) { - case CKM_SKIPJACK_CBC64: - case CKM_SKIPJACK_ECB64: - case CKM_SKIPJACK_OFB64: - case CKM_SKIPJACK_CFB64: - case CKM_SKIPJACK_CFB32: - case CKM_SKIPJACK_CFB16: - case CKM_SKIPJACK_CFB8: - /* Skipjack is being used as the bulk encryption algorithm.*/ - /* Unwrap the bulk key. */ - bulkkey = PK11_UnwrapSymKey(tek, CKM_SKIPJACK_WRAP, NULL, - encKey, CKM_SKIPJACK_CBC64, CKA_DECRYPT, 0); - break; - default: - /* Skipjack was not used for bulk encryption of this - message. Use Skipjack CBC64, with the nonSkipjackIV - part of the KEA key parameters, to decrypt - the bulk key. If the optional parameter bulkKeySize is present, - bulk key size is different than the encrypted key size */ - if (keaParams.bulkKeySize.len > 0) { - err = SEC_ASN1DecodeItem(NULL, &bulkLength, - SEC_ASN1_GET(SEC_IntegerTemplate), - &keaParams.bulkKeySize); - if (err != SECSuccess) - goto loser; - } - - bulkkey = PK11_UnwrapSymKey(tek, CKM_SKIPJACK_CBC64, &keaParams.nonSkipjackIV, - encKey, bulkType, CKA_DECRYPT, bulkLength); - break; - } - return bulkkey; -loser: - return NULL; -} - -/* ====== ESDH (Ephemeral-Static Diffie-Hellman) ==================================== */ - -SECStatus -NSS_CMSUtil_EncryptSymKey_ESDH(PLArenaPool *poolp, CERTCertificate *cert, PK11SymKey *key, - SECItem *encKey, SECItem **ukm, SECAlgorithmID *keyEncAlg, - SECItem *pubKey) -{ -#if 0 /* not yet done */ - SECOidTag certalgtag; /* the certificate's encryption algorithm */ - SECOidTag encalgtag; /* the algorithm used for key exchange/agreement */ - SECStatus rv; - SECItem *params = NULL; - int data_len; - SECStatus err; - PK11SymKey *tek; - CERTCertificate *ourCert; - SECKEYPublicKey *ourPubKey; - NSSCMSKEATemplateSelector whichKEA; - - certalgtag = SECOID_GetAlgorithmTag(&(cert->subjectPublicKeyInfo.algorithm)); - PORT_Assert(certalgtag == SEC_OID_X942_DIFFIE_HELMAN_KEY); - - /* We really want to show our KEA tag as the key exchange algorithm tag. */ - encalgtag = SEC_OID_CMS_EPHEMERAL_STATIC_DIFFIE_HELLMAN; - - /* Get the public key of the recipient. */ - publickey = CERT_ExtractPublicKey(cert); - if (publickey == NULL) goto loser; - - /* XXXX generate a DH key pair on a PKCS11 module (XXX which parameters?) */ - /* XXXX */ourCert = PK11_FindBestKEAMatch(cert, wincx); - if (ourCert == NULL) goto loser; - - arena = PORT_NewArena(1024); - if (arena == NULL) goto loser; - - /* While we're here, extract the key pair's public key data and copy it into */ - /* the outgoing parameters. */ - /* XXXX */ourPubKey = CERT_ExtractPublicKey(ourCert); - if (ourPubKey == NULL) - { - goto loser; - } - SECITEM_CopyItem(arena, pubKey, /* XXX */&(ourPubKey->u.fortezza.KEAKey)); - SECKEY_DestroyPublicKey(ourPubKey); /* we only need the private key from now on */ - ourPubKey = NULL; - - /* Extract our private key in order to derive the KEA key. */ - ourPrivKey = PK11_FindKeyByAnyCert(ourCert,wincx); - CERT_DestroyCertificate(ourCert); /* we're done with this */ - if (!ourPrivKey) goto loser; - - /* If ukm desired, prepare it - allocate enough space (filled with zeros). */ - if (ukm) { - ukm->data = (unsigned char*)PORT_ArenaZAlloc(arena,/* XXXX */); - ukm->len = /* XXXX */; - } - - /* Generate the KEK (key exchange key) according to RFC2631 which we use - * to wrap the bulk encryption key. */ - kek = PK11_PubDerive(ourPrivKey, publickey, PR_TRUE, - ukm, NULL, - /* XXXX */CKM_KEA_KEY_DERIVE, /* XXXX */CKM_SKIPJACK_WRAP, - CKA_WRAP, 0, wincx); - - SECKEY_DestroyPublicKey(publickey); - SECKEY_DestroyPrivateKey(ourPrivKey); - publickey = NULL; - ourPrivKey = NULL; - - if (!kek) - goto loser; - - /* allocate space for the encrypted CEK (bulk key) */ - encKey->data = (unsigned char*)PORT_ArenaAlloc(poolp, SMIME_FORTEZZA_MAX_KEY_SIZE); - encKey->len = SMIME_FORTEZZA_MAX_KEY_SIZE; - - if (encKey->data == NULL) - { - PK11_FreeSymKey(kek); - goto loser; - } - - - /* Wrap the bulk key using CMSRC2WRAP or CMS3DESWRAP, depending on the */ - /* bulk encryption algorithm */ - switch (/* XXXX */PK11_AlgtagToMechanism(enccinfo->encalg)) - { - case /* XXXX */CKM_SKIPJACK_CFB8: - err = PK11_WrapSymKey(/* XXXX */CKM_CMS3DES_WRAP, NULL, kek, bulkkey, encKey); - whichKEA = NSSCMSKEAUsesSkipjack; - break; - case /* XXXX */CKM_SKIPJACK_CFB8: - err = PK11_WrapSymKey(/* XXXX */CKM_CMSRC2_WRAP, NULL, kek, bulkkey, encKey); - whichKEA = NSSCMSKEAUsesSkipjack; - break; - default: - /* XXXX what do we do here? Neither RC2 nor 3DES... */ - break; - } - - PK11_FreeSymKey(kek); /* we do not need the KEK anymore */ - if (err != SECSuccess) - goto loser; - - /* see RFC2630 12.3.1.1 "keyEncryptionAlgorithm must be ..." */ - /* params is the DER encoded key wrap algorithm (with parameters!) (XXX) */ - params = SEC_ASN1EncodeItem(arena, NULL, &keaParams, sec_pkcs7_get_kea_template(whichKEA)); - if (params == NULL) - goto loser; - - /* now set keyEncAlg */ - rv = SECOID_SetAlgorithmID(poolp, keyEncAlg, SEC_OID_CMS_EPHEMERAL_STATIC_DIFFIE_HELLMAN, params); - if (rv != SECSuccess) - goto loser; - - /* XXXXXXX this is not right yet */ -loser: - if (arena) { - PORT_FreeArena(arena, PR_FALSE); - } - if (publickey) { - SECKEY_DestroyPublicKey(publickey); - } - if (ourPrivKey) { - SECKEY_DestroyPrivateKey(ourPrivKey); - } -#endif - return SECFailure; -} - -PK11SymKey * -NSS_CMSUtil_DecryptSymKey_ESDH(SECKEYPrivateKey *privkey, SECItem *encKey, SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg) -{ -#if 0 /* not yet done */ - SECStatus err; - CK_MECHANISM_TYPE bulkType; - PK11SymKey *tek; - SECKEYPublicKey *originatorPubKey; - NSSCMSSMIMEKEAParameters keaParams; - - /* XXXX get originator's public key */ - originatorPubKey = PK11_MakeKEAPubKey(keaParams.originatorKEAKey.data, - keaParams.originatorKEAKey.len); - if (originatorPubKey == NULL) - goto loser; - - /* Generate the TEK (token exchange key) which we use to unwrap the bulk encryption key. - The Derive function generates a shared secret and combines it with the originatorRA - data to come up with an unique session key */ - tek = PK11_PubDerive(privkey, originatorPubKey, PR_FALSE, - &keaParams.originatorRA, NULL, - CKM_KEA_KEY_DERIVE, CKM_SKIPJACK_WRAP, - CKA_WRAP, 0, pwfn_arg); - SECKEY_DestroyPublicKey(originatorPubKey); /* not needed anymore */ - if (tek == NULL) - goto loser; - - /* Now that we have the TEK, unwrap the bulk key - with which to decrypt the message. */ - /* Skipjack is being used as the bulk encryption algorithm.*/ - /* Unwrap the bulk key. */ - bulkkey = PK11_UnwrapSymKey(tek, CKM_SKIPJACK_WRAP, NULL, - encKey, CKM_SKIPJACK_CBC64, CKA_DECRYPT, 0); - - return bulkkey; - -loser: -#endif - return NULL; -} - |