/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is the Netscape security libraries.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1994-2000
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

/*
 * Test program for SDR (Secret Decoder Ring) functions.
 *
 * $Id$
 */

#include "nspr.h"
#include "string.h"
#include "nss.h"
#include "secutil.h"
#include "cert.h"
#include "pk11func.h"

#include "plgetopt.h"
#include "pk11sdr.h"
#include "nssb64.h"

#define DEFAULT_VALUE "Test"
static const char default_value[] = { DEFAULT_VALUE };

PRFileDesc *pr_stderr;
PRBool      verbose = PR_FALSE;

static void
synopsis (char *program_name)
{
    PR_fprintf (pr_stderr, 
"Usage: %s [<common>] -i <input-file>\n"
"       %s [<common>]  -o <output-file>\n"
"       <common> [-d dir] [-v] [-t text] [-a] [-f pwfile | -p pwd]\n",
	program_name, program_name);
}

static void
short_usage (char *program_name)
{
    PR_fprintf (pr_stderr,
		"Type %s -H for more detailed descriptions\n",
		program_name);
    synopsis (program_name);
}


static void
long_usage (char *program_name)
{
    synopsis (program_name);
    PR_fprintf (pr_stderr, "\nSecret Decoder Test:\n");
    PR_fprintf (pr_stderr,
		"  %-13s Read encrypted data from \"file\"\n",
		"-i file");
    PR_fprintf (pr_stderr,
		"  %-13s Write newly generated encrypted data to \"file\"\n",
		"-o file");
    PR_fprintf (pr_stderr,
		"  %-13s Use \"text\" as the plaintext for encryption and verification\n",
		"-t text");
    PR_fprintf (pr_stderr,
		"  %-13s Find security databases in \"dbdir\"\n",
		"-d dbdir");
    PR_fprintf (pr_stderr,
		"  %-13s read the password from \"pwfile\"\n",
		"-f pwfile");
    PR_fprintf (pr_stderr,
		"  %-13s supply \"password\" on the command line\n",
		"-p password");
}

int 
readStdin(SECItem * result)
{
  int bufsize = 0;
  int cc;
  int wanted  = 8192;

  result->len = 0;
  result->data = NULL;
  do {
    if (bufsize < wanted) {
      unsigned char * tmpData = (unsigned char *)PR_Realloc(result->data, wanted);
      if (!tmpData) {
	if (verbose) PR_fprintf(pr_stderr, "Allocation of buffer failed\n");
	return -1;
      }
      result->data = tmpData;
      bufsize = wanted;
    }
    cc = PR_Read(PR_STDIN, result->data + result->len, bufsize - result->len);
    if (cc > 0) {
      result->len += (unsigned)cc;
      if (result->len >= wanted) 
        wanted *= 2;
    }
  } while (cc > 0);
  return cc;
}

int
readInputFile(const char * filename, SECItem * result)
{
  PRFileDesc *file /* = PR_OpenFile(input_file, 0) */;
  PRFileInfo info;
  PRStatus s;
  PRInt32 count;
  int retval = -1;

  file = PR_Open(filename, PR_RDONLY, 0);
  if (!file) {
    if (verbose) PR_fprintf(pr_stderr, "Open of file %s failed\n", filename);
    goto loser;
  }

  s = PR_GetOpenFileInfo(file, &info);
  if (s != PR_SUCCESS) {
    if (verbose) PR_fprintf(pr_stderr, "File info operation failed\n");
    goto file_loser;
  }

  result->len = info.size;
  result->data = (unsigned char *)PR_Malloc(result->len);
  if (!result->data) {
    if (verbose) PR_fprintf(pr_stderr, "Allocation of buffer failed\n");
    goto file_loser;
  }

  count = PR_Read(file, result->data, result->len);
  if (count != result->len) {
    if (verbose) PR_fprintf(pr_stderr, "Read failed\n");
    goto file_loser;
  }
  retval = 0;

file_loser:
  PR_Close(file);
loser:
  return retval;
}

int
main (int argc, char **argv)
{
    int		 retval = 0;  /* 0 - test succeeded.  -1 - test failed */
    SECStatus	 rv;
    PLOptState	*optstate;
    PLOptStatus  optstatus;
    char	*program_name;
    const char  *input_file = NULL; 	/* read encrypted data from here (or create) */
    const char  *output_file = NULL;	/* write new encrypted data here */
    const char  *value = default_value;	/* Use this for plaintext */
    SECItem     data;
    SECItem     result = {0, 0, 0};
    SECItem     text;
    PRBool      ascii = PR_FALSE;
    secuPWData  pwdata = { PW_NONE, 0 };

    pr_stderr = PR_STDERR;
    result.data = 0;
    text.data = 0; text.len = 0;

    program_name = PL_strrchr(argv[0], '/');
    program_name = program_name ? (program_name + 1) : argv[0];

    optstate = PL_CreateOptState (argc, argv, "?Had:i:o:t:vf:p:");
    if (optstate == NULL) {
	SECU_PrintError (program_name, "PL_CreateOptState failed");
	return -1;
    }

    while ((optstatus = PL_GetNextOpt(optstate)) == PL_OPT_OK) {
	switch (optstate->option) {
	  case '?':
	    short_usage (program_name);
	    return retval;

	  case 'H':
	    long_usage (program_name);
	    return retval;

	  case 'a':
	    ascii = PR_TRUE;
	    break;

	  case 'd':
	    SECU_ConfigDirectory(optstate->value);
	    break;

          case 'i':
            input_file = optstate->value;
            break;

          case 'o':
            output_file = optstate->value;
            break;

          case 't':
            value = optstate->value;
            break;

	  case 'f':
	    if (pwdata.data) {
		PORT_Free(pwdata.data);
		short_usage(program_name);
		return -1;
	    }
	    pwdata.source = PW_FROMFILE;
	    pwdata.data = PORT_Strdup(optstate->value);
	    break;

	  case 'p':
	    if (pwdata.data) {
		PORT_Free(pwdata.data);
		short_usage(program_name);
		return -1;
	    }
	    pwdata.source = PW_PLAINTEXT;
	    pwdata.data = PORT_Strdup(optstate->value);
	    break;

          case 'v':
            verbose = PR_TRUE;
            break;
	}
    }
    PL_DestroyOptState(optstate);
    if (optstatus == PL_OPT_BAD) {
	short_usage (program_name);
	return -1;
    }
    if (!output_file && !input_file && value == default_value) {
	short_usage (program_name);
	PR_fprintf (pr_stderr, "Must specify at least one of -t, -i or -o \n");
	return -1;
    }

    /*
     * Initialize the Security libraries.
     */
    PK11_SetPasswordFunc(SECU_GetModulePassword);

    if (output_file) {
	rv = NSS_InitReadWrite(SECU_ConfigDirectory(NULL));
    } else {
	rv = NSS_Init(SECU_ConfigDirectory(NULL));
    }
    if (rv != SECSuccess) {
	SECU_PrintError(program_name, "NSS_Init failed");
	retval = -1;
	goto prdone;
    }

    /* Convert value into an item */
    data.data = (unsigned char *)value;
    data.len = strlen(value);

    /* Get the encrypted result, either from the input file
     * or from encrypting the plaintext value
     */
    if (input_file)
    {
      if (verbose) printf("Reading data from %s\n", input_file);

      if (!strcmp(input_file, "-")) {
	retval = readStdin(&result);
        ascii = PR_TRUE;
      } else {
        retval = readInputFile(input_file, &result);
      }
      if (retval != 0) 
	goto loser;
      if (ascii) {
	/* input was base64 encoded.  Decode it. */
	SECItem newResult = {0, 0, 0};
	SECItem *ok = NSSBase64_DecodeBuffer(NULL, &newResult, 
	                       (const char *)result.data, result.len);
	if (!ok) {
	  SECU_PrintError(program_name, "Base 64 decode failed");
	  retval = -1;
	  goto loser;
	}
	SECITEM_ZfreeItem(&result, PR_FALSE);
	result = *ok;
      }
    }
    else
    {
      SECItem keyid = { 0, 0, 0 };
      SECItem outBuf = { 0, 0, 0 };
      PK11SlotInfo *slot = NULL;

      /* sigh, initialize the key database */
      slot = PK11_GetInternalKeySlot();
      if (slot && PK11_NeedUserInit(slot)) {
	switch (pwdata.source) {
	case PW_FROMFILE:
	    rv = SECU_ChangePW(slot, 0, pwdata.data);
	    break;
	case PW_PLAINTEXT:
	    rv = SECU_ChangePW(slot, pwdata.data, 0);
	    break;
	default:
            rv = SECU_ChangePW(slot, "", 0);
	    break;
	}
        if (rv != SECSuccess) {
            SECU_PrintError(program_name, "Failed to initialize slot \"%s\"",
                                    PK11_GetSlotName(slot));
            return SECFailure;
        }
      }
      if (slot) {
	PK11_FreeSlot(slot);
      }

      rv = PK11SDR_Encrypt(&keyid, &data, &result, &pwdata);
      if (rv != SECSuccess) {
        if (verbose) 
	  SECU_PrintError(program_name, "Encrypt operation failed\n");
        retval = -1;
        goto loser;
      }

      if (verbose) printf("Encrypted result is %d bytes long\n", result.len);

      if (!strcmp(output_file, "-")) {
        ascii = PR_TRUE;
      }

      if (ascii) {
      	/* base64 encode output. */
	char * newResult = NSSBase64_EncodeItem(NULL, NULL, 0, &result);
	if (!newResult) {
	  SECU_PrintError(program_name, "Base 64 encode failed\n");
	  retval = -1;
	  goto loser;
	}
	outBuf.data = (unsigned char *)newResult;
	outBuf.len  = strlen(newResult);
	if (verbose) 
	  printf("Base 64 encoded result is %d bytes long\n", outBuf.len);
      } else {
	outBuf = result;
      }

      /* -v printf("Result is %.*s\n", text.len, text.data); */
      if (output_file) {
         PRFileDesc *file;
         PRInt32 count;

         if (verbose) printf("Writing result to %s\n", output_file);
	 if (!strcmp(output_file, "-")) {
	   file = PR_STDOUT;
	 } else {
	   /* Write to file */
	   file = PR_Open(output_file, PR_CREATE_FILE|PR_WRONLY, 0666);
	 }
         if (!file) {
            if (verbose) 
		SECU_PrintError(program_name, 
                                "Open of output file %s failed\n",
                                output_file);
            retval = -1;
            goto loser;
         }

         count = PR_Write(file, outBuf.data, outBuf.len);

	 if (file == PR_STDOUT) {
	   puts("");
	 } else {
	   PR_Close(file);
	 }

         if (count != outBuf.len) {
           if (verbose) SECU_PrintError(program_name, "Write failed\n");
           retval = -1;
           goto loser;
         }
	 if (ascii) {
	   free(outBuf.data);
	 }
      }
    }

    /* Decrypt the value */
    rv = PK11SDR_Decrypt(&result, &text, &pwdata);
    if (rv != SECSuccess) {
      if (verbose) SECU_PrintError(program_name, "Decrypt operation failed\n");
      retval = -1; 
      goto loser;
    }

    if (verbose) printf("Decrypted result is \"%.*s\"\n", text.len, text.data);

    /* Compare to required value */
    if (text.len != data.len || memcmp(data.data, text.data, text.len) != 0)
    {
      if (verbose) PR_fprintf(pr_stderr, "Comparison failed\n");
      retval = -1;
      goto loser;
    }

loser:
    if (text.data) SECITEM_ZfreeItem(&text, PR_FALSE);
    if (result.data) SECITEM_ZfreeItem(&result, PR_FALSE);
    if (NSS_Shutdown() != SECSuccess) {
       exit(1);
    }

prdone:
    PR_Cleanup ();
    if (pwdata.data) {
	PORT_Free(pwdata.data);
    }
    return retval;
}