path: root/security/nss/tests/ssl/ssl.sh

#! /bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****

########################################################################
#
# mozilla/security/nss/tests/ssl/ssl.sh
#
# Script to test NSS SSL
#
# needs to work on all Unix and Windows platforms
#
# special strings
# ---------------
#   FIXME ... known problems, search for this string
#   NOTE .... unexpected behavior
#
########################################################################

############################## ssl_init ################################
# local shell function to initialize this script
########################################################################
ssl_init()
{
  SCRIPTNAME=ssl.sh      # sourced - $0 would point to all.sh

  if [ -z "${CLEANUP}" ] ; then     # if nobody else is responsible for
      CLEANUP="${SCRIPTNAME}"       # cleaning this script will do it
  fi
  
  if [ -z "${INIT_SOURCED}" -o "${INIT_SOURCED}" != "TRUE" ]; then
      cd ../common
      . ./init.sh
  fi
  if [ ! -r $CERT_LOG_FILE ]; then  # we need certificates here
      cd ../cert
      . ./cert.sh
  fi
  SCRIPTNAME=ssl.sh
  echo "$SCRIPTNAME: SSL tests ==============================="

  grep "SUCCESS: SSL passed" $CERT_LOG_FILE >/dev/null &&
  grep "SUCCESS: SSL CRL prep passed" $CERT_LOG_FILE >/dev/null || {
      html_head "SSL Test failure"
      Exit 8 "Fatal - SSL of cert.sh needs to pass first"
  }

  PORT=${PORT-8443}

  # Test case files
  SSLCOV=${QADIR}/ssl/sslcov.txt
  SSLAUTH=${QADIR}/ssl/sslauth.txt
  SSLSTRESS=${QADIR}/ssl/sslstress.txt
  REQUEST_FILE=${QADIR}/ssl/sslreq.dat

  #temparary files
  SERVEROUTFILE=${TMP}/tests_server.$$
  SERVERPID=${TMP}/tests_pid.$$

  R_SERVERPID=../tests_pid.$$

  TEMPFILES="$TMPFILES ${SERVEROUTFILE}  ${SERVERPID}"

  fileout=0 #FIXME, looks like all.sh tried to turn this on but actually didn't
  #fileout=1
  #verbose="-v" #FIXME - see where this is usefull

  USER_NICKNAME=TestUser
  NORM_EXT=""

  cd ${CLIENTDIR}
}

########################### is_selfserv_alive ##########################
# local shell function to exit with a fatal error if selfserver is not
# running
########################################################################
is_selfserv_alive()
{
  if [ ! -f "${SERVERPID}" ]; then
      echo "$SCRIPTNAME: Error - selfserv PID file ${SERVERPID} doesn't exist"
      sleep 5
      if [ ! -f "${SERVERPID}" ]; then
          Exit 9 "Fatal - selfserv pid file ${SERVERPID} does not exist"
      fi
  fi
  if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
      PID=${SHELL_SERVERPID}
  else
      PID=`cat ${SERVERPID}`
  fi
  #if  [ "${OS_ARCH}" = "Linux" ]; then
      kill -0 $PID >/dev/null 2>/dev/null || Exit 10 "Fatal - selfserv process not detectable"
  #else
      #$PS -e | grep $PID >/dev/null || \
          #Exit 10 "Fatal - selfserv process not detectable"
  #fi
}

########################### wait_for_selfserv ##########################
# local shell function to wait until selfserver is running and initialized
########################################################################
wait_for_selfserv()
{
  echo "tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \\"
  echo "        -d ${P_R_CLIENTDIR} < ${REQUEST_FILE}"
  #echo "tstclnt -q started at `date`"
  tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \
          -d ${P_R_CLIENTDIR} < ${REQUEST_FILE}
  if [ $? -ne 0 ]; then
      html_failed "<TR><TD> Wait for Server "
      echo "RETRY: tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \\"
      echo "               -d ${P_R_CLIENTDIR} < ${REQUEST_FILE}"
      tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \
              -d ${P_R_CLIENTDIR} < ${REQUEST_FILE}
  elif [ sparam = "-c ABCDEFabcdefghijklmnvy" ] ; then # "$1" = "cov" ] ; then
      html_passed "<TR><TD> Wait for Server"
  fi
  is_selfserv_alive
}

########################### kill_selfserv ##############################
# local shell function to kill the selfserver after the tests are done
########################################################################
kill_selfserv()
{
  if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
      PID=${SHELL_SERVERPID}
  else
      PID=`cat ${SERVERPID}`
  fi
  ${KILL} ${PID}
  wait ${PID}
  if [ ${fileout} -eq 1 ]; then
      cat ${SERVEROUTFILE}
  fi
  # On Linux selfserv needs up to 30 seconds to fully die and free
  # the port.  Wait until the port is free. (Bug 129701)
  if [ "${OS_ARCH}" = "Linux" ]; then
      until selfserv -b -p ${PORT} 2>/dev/null; do
          sleep 1
      done
  fi
  rm ${SERVERPID}
}

########################### start_selfserv #############################
# local shell function to start the selfserver with the parameters required 
# for this test and log information (parameters, start time)
# also: wait until the server is up and running
########################################################################
start_selfserv()
{
  if [ -n "$testname" ] ; then
      echo "$SCRIPTNAME: $testname ----"
  fi
  sparam=`echo $sparam | sed -e 's;_; ;g'`
  echo "selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \\"
  echo "         -w nss ${sparam} -i ${R_SERVERPID} $verbose &"
  echo "selfserv started at `date`"
  if [ ${fileout} -eq 1 ]; then
      selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \
               -w nss ${sparam} -i ${R_SERVERPID} $verbose \
               > ${SERVEROUTFILE} 2>&1 &
  else
      selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \
               -w nss ${sparam} -i ${R_SERVERPID} $verbose &
  fi
  # The PID $! returned by the MKS or Cygwin shell is not the PID of
  # the real background process, but rather the PID of a helper
  # process (sh.exe).  MKS's kill command has a bug: invoking kill
  # on the helper process does not terminate the real background
  # process.  Our workaround has been to have selfserv save its PID
  # in the ${SERVERPID} file and "kill" that PID instead.  But this
  # doesn't work under Cygwin; its kill command doesn't recognize
  # the PID of the real background process, but it does work on the
  # PID of the helper process.  So we save the value of $! in the
  # SHELL_SERVERPID variable, and use it instead of the ${SERVERPID}
  # file under Cygwin.  (In fact, this should work in any shell
  # other than the MKS shell.)
  SHELL_SERVERPID=$!
  wait_for_selfserv
}

############################## ssl_cov #################################
# local shell function to perform SSL Cipher Coverage tests
########################################################################
ssl_cov()
{
  html_head "SSL Cipher Coverage $NORM_EXT - $BYPASS_STRING"

  testname=""
  sparam="-c ABCDEFabcdefghijklmnvyz"
  start_selfserv # Launch the server
               
  p=""

  while read tls param testname
  do
      p=`echo "$testname" | sed -e "s/ .*//"`   #sonmi, only run extended test on SSL3 and TLS
      
      if [ "$p" = "SSL2" -a "$NORM_EXT" = "Extended Test" ] ; then
          echo "$SCRIPTNAME: skipping  $testname for $NORM_EXT"
      elif [ "$tls" != "#" ] ; then
          echo "$SCRIPTNAME: running $testname ----------------------------"
          TLS_FLAG=-T
          if [ $tls = "TLS" ]; then
              TLS_FLAG=""
          fi

          is_selfserv_alive
          echo "tstclnt -p ${PORT} -h ${HOSTADDR} -c ${param} ${TLS_FLAG} ${CLIENT_OPTIONS} \\"
          echo "        -f -d ${P_R_CLIENTDIR} < ${REQUEST_FILE}"

          rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
          tstclnt -p ${PORT} -h ${HOSTADDR} -c ${param} ${TLS_FLAG} ${CLIENT_OPTIONS} -f \
                  -d ${P_R_CLIENTDIR} < ${REQUEST_FILE} \
                  >${TMP}/$HOST.tmp.$$  2>&1
          ret=$?
          cat ${TMP}/$HOST.tmp.$$ 
          rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
          html_msg $ret 0 "${testname}"
      fi
  done < ${SSLCOV}

  kill_selfserv
  html "</TABLE><BR>"
}

############################## ssl_auth ################################
# local shell function to perform SSL  Client Authentication tests
########################################################################
ssl_auth()
{
  html_head "SSL Client Authentication $NORM_EXT - $BYPASS_STRING"

  while read value sparam cparam testname
  do
      if [ $value != "#" ]; then
          cparam=`echo $cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
          start_selfserv

          echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${P_R_CLIENTDIR} ${CLIENT_OPTIONS} \\"
	  echo "        ${cparam}  < ${REQUEST_FILE}"
          rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
          tstclnt -p ${PORT} -h ${HOSTADDR} -f ${cparam} ${CLIENT_OPTIONS} \
                  -d ${P_R_CLIENTDIR} < ${REQUEST_FILE} \
                  >${TMP}/$HOST.tmp.$$  2>&1
          ret=$?
          cat ${TMP}/$HOST.tmp.$$ 
          rm ${TMP}/$HOST.tmp.$$ 2>/dev/null

          html_msg $ret $value "${testname}" \
                   "produced a returncode of $ret, expected is $value"
          kill_selfserv
      fi
  done < ${SSLAUTH}

  html "</TABLE><BR>"
}


############################## ssl_stress ##############################
# local shell function to perform SSL stress test
########################################################################
ssl_stress()
{
  html_head "SSL Stress Test $NORM_EXT - $BYPASS_STRING"

  while read value sparam cparam testname
  do
      p=`echo "$testname" | sed -e "s/Stress //" -e "s/ .*//"`   #sonmi, only run extended test on SSL3 and TLS
      if [ "$p" = "SSL2" -a "$NORM_EXT" = "Extended Test" ] ; then
          echo "$SCRIPTNAME: skipping  $testname for $NORM_EXT"
      elif [ $value != "#" ]; then
          cparam=`echo $cparam | sed -e 's;_; ;g'`
          start_selfserv
          if [ `uname -n` = "sjsu" ] ; then
              echo "debugging disapering selfserv... ps -ef | grep selfserv"
              ps -ef | grep selfserv
          fi

          echo "strsclnt -q -p ${PORT} -d ${P_R_CLIENTDIR} ${CLIENT_OPTIONS} -w nss $cparam \\"
          echo "         $verbose ${HOSTADDR}"
          echo "strsclnt started at `date`"
          strsclnt -q -p ${PORT} -d ${P_R_CLIENTDIR} ${CLIENT_OPTIONS} -w nss $cparam \
                   $verbose ${HOSTADDR}
          ret=$?
          echo "strsclnt completed at `date`"
          html_msg $ret $value "${testname}"
          if [ `uname -n` = "sjsu" ] ; then
              echo "debugging disapering selfserv... ps -ef | grep selfserv"
              ps -ef | grep selfserv
          fi
          kill_selfserv
      fi
  done < ${SSLSTRESS}

  html "</TABLE><BR>"
}

############################## ssl_crl #################################
# local shell function to perform SSL test with/out revoked certs tests
########################################################################

ssl_crl_ssl()
{
  html_head "CRL SSL Client Tests $NORM_EXT"
  
  # Using First CRL Group for this test. There are $CRL_GRP_1_RANGE certs in it.
  # Cert number $UNREVOKED_CERT_GRP_1 was not revoked
  CRL_GROUP_BEGIN=$CRL_GRP_1_BEGIN
  CRL_GROUP_RANGE=$CRL_GRP_1_RANGE
  UNREVOKED_CERT=$UNREVOKED_CERT_GRP_1

  while read value sparam cparam testname
  do
    if [ $value != "#" ]; then
	servarg=`echo $sparam | awk '{r=split($0,a,"-r") - 1;print r;}'`
	pwd=`echo $cparam | grep nss`
	user=`echo $cparam | grep TestUser`
	_cparam=$cparam
	case $servarg in
	    1) if [ -z "$pwd" -o -z "$user" ]; then
                 rev_modvalue=0
               else
	         rev_modvalue=254
               fi
               ;;
	    2) rev_modvalue=254 ;;
	    3) if [ -z "$pwd" -o -z "$user" ]; then
		rev_modvalue=0
		else
		rev_modvalue=1
		fi
		;;
	    4) rev_modvalue=1 ;;
	esac
	TEMP_NUM=0
	while [ $TEMP_NUM -lt $CRL_GROUP_RANGE ]
	  do
	  CURR_SER_NUM=`expr ${CRL_GROUP_BEGIN} + ${TEMP_NUM}`
	  TEMP_NUM=`expr $TEMP_NUM + 1`
	  USER_NICKNAME="TestUser${CURR_SER_NUM}"
	  cparam=`echo $_cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
	  start_selfserv
	  
	  echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${R_CLIENTDIR} \\"
	  echo "        ${cparam}  < ${REQUEST_FILE}"
	  rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
	  tstclnt -p ${PORT} -h ${HOSTADDR} -f ${cparam} \
	      -d ${R_CLIENTDIR} < ${REQUEST_FILE} \
	      >${TMP}/$HOST.tmp.$$  2>&1
	  ret=$?
	  cat ${TMP}/$HOST.tmp.$$ 
	  rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
	  if [ $CURR_SER_NUM -ne $UNREVOKED_CERT ]; then
	      modvalue=$rev_modvalue
              testAddMsg="revoked"
	  else
              testAddMsg="not revoked"
	      modvalue=$value
	  fi
	  
	  html_msg $ret $modvalue "${testname} (cert ${USER_NICKNAME} - $testAddMsg)" \
		"produced a returncode of $ret, expected is $modvalue"
	  kill_selfserv
	done
    fi
  done < ${SSLAUTH}

  html "</TABLE><BR>"
}

############################## ssl_crl #################################
# local shell function to perform SSL test for crl cache functionality
# with/out revoked certs 
########################################################################

is_revoked() {
    certNum=$1
    currLoadedGrp=$2
    
    found=0
    ownerGrp=1
    while [ $ownerGrp -le $TOTAL_GRP_NUM -a $found -eq 0 ]
      do
      currGrpBegin=`eval echo \$\{CRL_GRP_${ownerGrp}_BEGIN\}`
      currGrpRange=`eval echo \$\{CRL_GRP_${ownerGrp}_RANGE\}`
      currGrpEnd=`expr $currGrpBegin + $currGrpRange - 1`
      if [ $certNum -ge $currGrpBegin -a $certNum -le $currGrpEnd ]; then
          found=1
      else
          ownerGrp=`expr $ownerGrp + 1`
      fi
    done
    if [ $found -eq 1 -a $currLoadedGrp -lt $ownerGrp ]; then
        return 1
    fi
    if [ $found -eq 0 ]; then
        return 1
    fi
    unrevokedGrpCert=`eval echo \$\{UNREVOKED_CERT_GRP_${ownerGrp}\}`
    if [ $certNum -eq $unrevokedGrpCert ]; then
        return 1
    fi
    return 0
}

load_group_crl() {
    group=$1

    OUTFILE_TMP=${TMP}/$HOST.tmp.$$
    grpBegin=`eval echo \$\{CRL_GRP_${group}_BEGIN\}`
    grpRange=`eval echo \$\{CRL_GRP_${group}_RANGE\}`
    grpEnd=`expr $grpBegin + $grpRange - 1`
    
    if [ "$grpBegin" = "" -o "$grpRange" = "" ]; then
        ret=1
        return 1;
    fi
    
    if [ "$RELOAD_CRL" != "" ]; then
        if [ $group -eq 1 ]; then
            echo "==================== Resetting to group 1 crl ==================="
            kill_selfserv
            start_selfserv
            is_selfserv_alive
        fi
        echo "================= Reloading CRL for group $grpBegin - $grpEnd ============="

        echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${R_CLIENTDIR} \\"
        echo "          -w nss -n TestUser${UNREVOKED_CERT_GRP_1}"
        echo "Request:"
        echo "GET crl://${SERVERDIR}/root.crl_${grpBegin}-${grpEnd}"
        echo ""
        echo "RELOAD time $i"
        tstclnt -p ${PORT} -h ${HOSTADDR} -f  \
            -d ${R_CLIENTDIR} -w nss -n TestUser${UNREVOKED_CERT_GRP_1} \
            <<_EOF_REQUEST_ >${OUTFILE_TMP}  2>&1
GET crl://${SERVERDIR}/root.crl_${grpBegin}-${grpEnd}

_EOF_REQUEST_
        cat ${OUTFILE_TMP}
        grep "CRL ReCache Error" ${OUTFILE_TMP}
        if [ $? -eq 0 ]; then
            ret=1
            return 1
        fi
    else
        echo "=== Updating DB for group $grpBegin - $grpEnd and restarting selfserv ====="

        kill_selfserv
        CU_ACTION="Importing CRL for groups $grpBegin - $grpEnd"
        crlu -d ${R_SERVERDIR} -I -i ${SERVERDIR}/root.crl_${grpBegin}-${grpEnd} \
             -p ../tests.pw.928
        ret=$?
        if [ "$ret" -eq 0 ]; then
            return 1
        fi
        start_selfserv        
    fi
    is_selfserv_alive
    ret=$?
    echo "================= CRL Reloaded ============="
}


ssl_crl_cache()
{
  html_head "Cache CRL SSL Client Tests $NORM_EXT"
  SSLAUTH_TMP=${TMP}/authin.tl.tmp
  SERV_ARG=-r_-r
  rm -f ${SSLAUTH_TMP}
  echo ${SSLAUTH_TMP}

  grep -- " $SERV_ARG " ${SSLAUTH} | grep -v "^#" | grep -v none | grep -v bogus > ${SSLAUTH_TMP}
  echo $?
  while [ $? -eq 0 -a -f ${SSLAUTH_TMP} ]
    do
    sparam=$SERV_ARG
    start_selfserv
    while read value sparam cparam testname
      do
      servarg=`echo $sparam | awk '{r=split($0,a,"-r") - 1;print r;}'`
      pwd=`echo $cparam | grep nss`
      user=`echo $cparam | grep TestUser`
      _cparam=$cparam
      case $servarg in
          1) if [ -z "$pwd" -o -z "$user" ]; then
              rev_modvalue=0
              else
              rev_modvalue=254
              fi
              ;;
          2) rev_modvalue=254 ;;

          3) if [ -z "$pwd" -o -z "$user" ]; then
              rev_modvalue=0
              else
              rev_modvalue=1
              fi
              ;;
          4) rev_modvalue=1 ;;
	esac
      TEMP_NUM=0
      LOADED_GRP=1
      while [ ${LOADED_GRP} -le ${TOTAL_GRP_NUM} ]
        do
        while [ $TEMP_NUM -lt $TOTAL_CRL_RANGE ]
          do
          CURR_SER_NUM=`expr ${CRL_GRP_1_BEGIN} + ${TEMP_NUM}`
          TEMP_NUM=`expr $TEMP_NUM + 1`
          USER_NICKNAME="TestUser${CURR_SER_NUM}"
          cparam=`echo $_cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
          
          echo "Server Args: $SERV_ARG"
          echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${R_CLIENTDIR} \\"
          echo "        ${cparam}  < ${REQUEST_FILE}"
          rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
          tstclnt -p ${PORT} -h ${HOSTADDR} -f ${cparam} \
	      -d ${R_CLIENTDIR} < ${REQUEST_FILE} \
              >${TMP}/$HOST.tmp.$$  2>&1
          ret=$?
          cat ${TMP}/$HOST.tmp.$$ 
          rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
          is_revoked ${CURR_SER_NUM} ${LOADED_GRP}
          isRevoked=$?
          if [ $isRevoked -eq 0 ]; then
              modvalue=$rev_modvalue
              testAddMsg="revoked"
          else
              modvalue=$value
              testAddMsg="not revoked"
          fi
          
          is_selfserv_alive
          ss_status=$?
          if [ "$ss_status" -ne 0 ]; then
              html_msg $ret $modvalue \
                  "${testname}(cert ${USER_NICKNAME} - $testAddMsg)" \
                  "produced a returncode of $ret, expected is $modvalue. " \
                  "selfserv is not alive!"
          else
              html_msg $ret $modvalue \
                  "${testname}(cert ${USER_NICKNAME} - $testAddMsg)" \
                  "produced a returncode of $ret, expected is $modvalue"
          fi
        done
        LOADED_GRP=`expr $LOADED_GRP + 1`
        TEMP_NUM=0
        if [ "$LOADED_GRP" -le "$TOTAL_GRP_NUM" ]; then
            load_group_crl $LOADED_GRP
            html_msg $ret 0 "Load group $LOADED_GRP crl " \
                "produced a returncode of $ret, expected is 0"
        fi
      done
      load_group_crl 1
    done < ${SSLAUTH_TMP}
    kill_selfserv
    SERV_ARG="${SERV_ARG}_-r"
    rm -f ${SSLAUTH_TMP}
    grep -- " $SERV_ARG " ${SSLAUTH} | grep -v none | grep -v bogus  > ${SSLAUTH_TMP}
  done
  TEMPFILES=${SSLAUTH_TMP}
  html "</TABLE><BR>"
}


############################## ssl_cleanup #############################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
ssl_cleanup()
{
  rm $SERVERPID 2>/dev/null
  cd ${QADIR}
  . common/cleanup.sh
}


############################## ssl_run ### #############################
# local shell function to run both standard and extended ssl tests
########################################################################
ssl_run()
{
    ssl_init

    ssl_cov
    ssl_auth
    ssl_stress

    SERVERDIR=$EXT_SERVERDIR
    CLIENTDIR=$EXT_CLIENTDIR
    R_SERVERDIR=$R_EXT_SERVERDIR
    R_CLIENTDIR=$R_EXT_CLIENTDIR
    P_R_SERVERDIR=$P_R_EXT_SERVERDIR
    P_R_CLIENTDIR=$P_R_EXT_CLIENTDIR
    USER_NICKNAME=ExtendedSSLUser
    NORM_EXT="Extended Test"
    cd ${CLIENTDIR}
    ssl_cov
    ssl_auth
    ssl_stress

    # the next round off ssl tests will only run if these vars are reset
    SERVERDIR=$ORIG_SERVERDIR
    CLIENTDIR=$ORIG_CLIENTDIR
    R_SERVERDIR=$ORIG_R_SERVERDIR
    R_CLIENTDIR=$ORIG_R_CLIENTDIR
    P_R_SERVERDIR=$ORIG_P_R_SERVERDIR
    P_R_CLIENTDIR=$ORIG_P_R_CLIENTDIR
    USER_NICKNAME=TestUser
    NORM_EXT=
    cd ${QADIR}/ssl
    ssl_cleanup
}

################## main #################################################

#this script may be sourced from the distributed stress test - in this case do nothing...

if [ -z  "$DO_REM_ST" -a -z  "$DO_DIST_ST" ] ; then

    ssl_init

    # save the directories as setup by init.sh
    ORIG_SERVERDIR=$SERVERDIR
    ORIG_CLIENTDIR=$CLIENTDIR
    ORIG_R_SERVERDIR=$R_SERVERDIR
    ORIG_R_CLIENTDIR=$R_CLIENTDIR
    ORIG_P_R_SERVERDIR=$P_R_SERVERDIR
    ORIG_P_R_CLIENTDIR=$P_R_CLIENTDIR

    ssl_crl_ssl
    ssl_crl_cache
    ssl_cleanup

    # Test all combinations of server bypass and client bypass
    CLIENT_OPTIONS="-B -s"
    SERVER_OPTIONS=""
    BYPASS_STRING="Client Bypass"
    ssl_run
    SERVER_OPTIONS="-B -s"
    CLIENT_OPTIONS=""
    BYPASS_STRING="Server Bypass"
    ssl_run

fi