path: root/security/nss/tests/ssl/ssl.sh

#! /bin/sh
#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
# 
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
# 
# The Original Code is the Netscape security libraries.
# 
# The Initial Developer of the Original Code is Netscape
# Communications Corporation.  Portions created by Netscape are 
# Copyright (C) 1994-2000 Netscape Communications Corporation.  All
# Rights Reserved.
# 
# Contributor(s):
# 
# Alternatively, the contents of this file may be used under the
# terms of the GNU General Public License Version 2 or later (the
# "GPL"), in which case the provisions of the GPL are applicable 
# instead of those above.  If you wish to allow use of your 
# version of this file only under the terms of the GPL and not to
# allow others to use your version of this file under the MPL,
# indicate your decision by deleting the provisions above and
# replace them with the notice and other provisions required by
# the GPL.  If you do not delete the provisions above, a recipient
# may use your version of this file under either the MPL or the
# GPL.
#
#
########################################################################
#
# mozilla/security/nss/tests/ssl/ssl.sh
#
# Script to test NSS SSL
#
# needs to work on all Unix and Windows platforms
#
# special strings
# ---------------
#   FIXME ... known problems, search for this string
#   NOTE .... unexpected behavior
#
########################################################################

############################## ssl_init ################################
# local shell function to initialize this script
########################################################################
ssl_init()
{
  SCRIPTNAME=ssl.sh      # sourced - $0 would point to all.sh

  if [ -z "${CLEANUP}" ] ; then     # if nobody else is responsible for
      CLEANUP="${SCRIPTNAME}"       # cleaning this script will do it
  fi
  
  if [ -z "${INIT_SOURCED}" -o "${INIT_SOURCED}" != "TRUE" ]; then
      cd ../common
      . init.sh
  fi
  if [ ! -r $CERT_LOG_FILE ]; then  # we need certificates here
      cd ../cert
      . cert.sh
  fi
  SCRIPTNAME=ssl.sh
  echo "$SCRIPTNAME: SSL tests ==============================="

  grep "SUCCESS: SSL passed" $CERT_LOG_FILE >/dev/null || {
      html_head "SSL Test failure"
      Exit 8 "Fatal - SSL of cert.sh needs to pass first"
  }

  PORT=${PORT-8443}

  # Test case files
  SSLCOV=${QADIR}/ssl/sslcov.txt
  SSLAUTH=${QADIR}/ssl/sslauth.txt
  SSLSTRESS=${QADIR}/ssl/sslstress.txt
  REQUEST_FILE=${QADIR}/ssl/sslreq.txt

  #temparary files
  SERVEROUTFILE=${TMP}/tests_server.$$
  SERVERPID=${TMP}/tests_pid.$$

  R_SERVERPID=../tests_pid.$$

  TEMPFILES="$TMPFILES ${SERVEROUTFILE}  ${SERVERPID}"

  fileout=0 #FIXME, looks like all.sh tried to turn this on but actually didn't
  #fileout=1
  #verbose="-v" #FIXME - see where this is usefull
  cd ${CLIENTDIR}

}

########################### is_selfserv_alive ##########################
# local shell function to exit with a fatal error if selfserver is not
# running
########################################################################
is_selfserv_alive()
{
  if [ ! -f "${SERVERPID}" ]; then
      echo "$SCRIPTNAME: Error - selfserv PID file ${SERVERPID} doesn't exist"
      sleep 5
      if [ ! -f "${SERVERPID}" ]; then
          Exit 9 "Fatal - selfserv pid file ${SERVERPID} does not exist"
      fi
  fi
  PID=`cat ${SERVERPID}`
  $PS -e | grep $PID >/dev/null || \
      Exit 10 "Fatal - selfserv process not detectable"
}

########################### wait_for_selfserv ##########################
# local shell function to wait until selfserver is running and initialized
########################################################################
wait_for_selfserv()
{
  echo "tstclnt -p ${PORT} -h ${HOST} -q -d . < ${REQUEST_FILE} "
  #echo "tstclnt -q started at `date`"
  tstclnt -p ${PORT} -h ${HOST} -q -d . < ${REQUEST_FILE}
  if [ $? -ne 0 ]; then
      html_failed "<TR><TD> Wait for Server "
      echo "RETRY: tstclnt -p ${PORT} -h ${HOST} -q -d . < ${REQUEST_FILE}"
      tstclnt -p ${PORT} -h ${HOST} -q -d . < ${REQUEST_FILE}
  elif [ sparam = "-c ABCDEFabcdefghijklm" ] ; then # "$1" = "cov" ] ; then
      html_passed "<TR><TD> Wait for Server"
  fi
  is_selfserv_alive
}

########################### kill_selfserv ##############################
# local shell function to kill the selfserver after the tests are done
########################################################################
kill_selfserv()
{
  ${KILL} `cat ${SERVERPID}`
  wait `cat ${SERVERPID}`
  if [ ${fileout} -eq 1 ]; then
      cat ${SERVEROUTFILE}
  fi
  ${SLEEP}  #FIXME linux waits 30 seconds - find a shorter way (sockets free)
  rm ${SERVERPID}
}

########################### start_selfserv #############################
# local shell function to start the selfserver with the parameters required 
# for this test and log information (parameters, start time)
# also: wait until the server is up and running
########################################################################
start_selfserv()
{
  if [ -n "$testname" ] ; then
      echo "$SCRIPTNAME: $testname ----"
  fi
  sparam=`echo $sparam | sed -e 's;_; ;g'`
  echo "selfserv -D -p ${PORT} -d ${R_SERVERDIR} -n ${HOSTADDR} \\"
  echo "         -w nss ${sparam} -i ${R_SERVERPID} $verbose &"
  echo "selfserv started at `date`"
  if [ ${fileout} -eq 1 ]; then
      selfserv -D -p ${PORT} -d ${R_SERVERDIR} -n ${HOSTADDR} \
               -w nss ${sparam} -i ${R_SERVERPID} $verbose \
               > ${SERVEROUTFILE} 2>&1 &
  else
      selfserv -D -p ${PORT} -d ${R_SERVERDIR} -n ${HOSTADDR} \
               -w nss ${sparam} -i ${R_SERVERPID} $verbose &
  fi
  wait_for_selfserv
}

############################## ssl_cov #################################
# local shell function to perform SSL Cipher Coverage tests
########################################################################
ssl_cov()
{
  html_head "SSL Cipher Coverage"

  testname=""
  sparam="-c ABCDEFabcdefghijklm"
  start_selfserv # Launch the server
               
  cat ${SSLCOV} | while read tls param testname
  do
      if [ $tls != "#" ]; then
          echo "$SCRIPTNAME: running $testname ----------------------------"
          TLS_FLAG=-T
          if [ $tls = "TLS" ]; then
              TLS_FLAG=""
          fi
          sparam=""
          if [ ${param} = "i" ]; then
              sparam='-c i'
          fi

          is_selfserv_alive
          echo "tstclnt -p ${PORT} -h ${HOST} -c ${param} ${TLS_FLAG} \\"
          echo "        -f -d . < ${REQUEST_FILE}"
          if [ `uname -n` = "dump" ] ; then
              echo "workaround for dump to avoid client and server writes at "
              echo "       the same time"
              rm ${TMP}/dump.tmp.$$ 2>/dev/null
              tstclnt -p ${PORT} -h ${HOST} -c ${param} ${TLS_FLAG} -f \
                  -d . < ${REQUEST_FILE} >${TMP}/dump.tmp.$$  2>&1
              ret=$?
              cat ${TMP}/dump.tmp.$$ 
              rm ${TMP}/dump.tmp.$$ 2>/dev/null
          else
              tstclnt -p ${PORT} -h ${HOST} -c ${param} ${TLS_FLAG} -f \
                  -d . < ${REQUEST_FILE}
              ret=$?
          fi
          html_msg $ret 0 "${testname}"
      fi
  done

  kill_selfserv
  html "</TABLE><BR>"
}

############################## ssl_auth ################################
# local shell function to perform SSL  Client Authentication tests
########################################################################
ssl_auth()
{
  html_head "SSL Client Authentication"

  cat ${SSLAUTH} | while read value sparam cparam testname
  do
      if [ $value != "#" ]; then
          cparam=`echo $cparam | sed -e 's;_; ;g'`
          start_selfserv

          echo "tstclnt -p ${PORT} -h ${HOST} -f -d . ${cparam} \\"
          echo "        < ${REQUEST_FILE}"
          if [ `uname -n` = "dump" ] ; then
              echo "workaround for dump to avoid client and server writes at "
              echo "       the same time"
              rm ${TMP}/dump.tmp.$$ 2>/dev/null
              tstclnt -p ${PORT} -h ${HOST} -f ${cparam} \
                  -d . < ${REQUEST_FILE} >${TMP}/dump.tmp.$$  2>&1
              ret=$?
              cat ${TMP}/dump.tmp.$$ 
              rm ${TMP}/dump.tmp.$$ 2>/dev/null
          else
            tstclnt -p ${PORT} -h ${HOST} -f -d . ${cparam} < ${REQUEST_FILE}
            ret=$?
          fi

          html_msg $ret $value "${testname}" \
                   "produced a returncode of $ret, expected is $value"
          kill_selfserv
      fi
  done

  html "</TABLE><BR>"
}


############################## ssl_stress ##############################
# local shell function to perform SSL stress test
########################################################################
ssl_stress()
{
  html_head "SSL Stress Test"

  cat ${SSLSTRESS} | while read value sparam cparam testname
  do
      if [ $value != "#" ]; then
          cparam=`echo $cparam | sed -e 's;_; ;g'`
          start_selfserv

          #FIXME - this is done because NSS 3.2 stressclient did not have the 
          # -q option - needs to be removed when testing later releases
          if [ -n "$BC_RELEASE" -a "$BC_RELEASE" = "3.2" -a \
               -n "$TEST_LEVEL" -a "$TEST_LEVEL" = "2" ] ; then
              echo "strsclnt -p ${PORT} -d . -w nss $cparam $verbose \\"
              echo "         ${HOSTADDR}"
              echo "strsclnt started at `date`"
              strsclnt -p ${PORT} -d . -w nss $cparam $verbose ${HOSTADDR}
              ret=$?
          else
              echo "strsclnt -q -p ${PORT} -d . -w nss $cparam $verbose \\"
              echo "         ${HOSTADDR}"
              echo "strsclnt started at `date`"
              strsclnt -q -p ${PORT} -d . -w nss $cparam $verbose ${HOSTADDR}
              ret=$?
          fi
          echo "strsclnt completed at `date`"
          html_msg $ret $value "${testname}"
          kill_selfserv
      fi
  done

  html "</TABLE><BR>"
}


############################## ssl_cleanup #############################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
ssl_cleanup()
{
  rm $SERVERPID 2>/dev/null
  cd ${QADIR}
  . common/cleanup.sh
}

################## main #################################################

#this script may be sourced from the distributed stress test - in this case do nothing...

if [ -z  "$DO_REM_ST" -a -z  "$DO_DIST_ST" ] ; then
    ssl_init
    ssl_cov
    ssl_auth
    ssl_stress
    ssl_cleanup
fi