Imported from /home/lorry/working-area/delta_ntp/ntp-dev-4.2.7p482.tar.gz.ntp-dev-4.2.7p482

1 files changed, 199 insertions, 0 deletions

diff --git a/ports/winnt/libntp/messages.h b/ports/winnt/libntp/messages.h
new file mode 100644
index 0000000..4753711
--- /dev/null
+++ b/ports/winnt/libntp/messages.h
@@ -0,0 +1,199 @@
+ /*
+ Microsoft Developer Support
+ Copyright (c) 1992 Microsoft Corporation
+
+ This file contains the message definitions for the Win32
+ syslog support messages for the nntp firewall
+-------------------------------------------------------------------------
+ HEADER SECTION
+
+ The header section defines names and language identifiers for use
+ by the message definitions later in this file. The MessageIdTypedef,
+ SeverityNames, FacilityNames, and LanguageNames keywords are
+ optional and not required.
+
+
+
+ The MessageIdTypedef keyword gives a typedef name that is used in a
+ type cast for each message code in the generated include file. Each
+ message code appears in the include file with the format: #define
+ name ((type) 0xnnnnnnnn) The default value for type is empty, and no
+ type cast is generated. It is the programmer's responsibility to
+ specify a typedef statement in the application source code to define
+ the type. The type used in the typedef must be large enough to
+ accomodate the entire 32-bit message code.
+
+
+
+ The SeverityNames keyword defines the set of names that are allowed
+ as the value of the Severity keyword in the message definition. The
+ set is delimited by left and right parentheses. Associated with each
+ severity name is a number that, when shifted left by 30, gives the
+ bit pattern to logical-OR with the Facility value and MessageId
+ value to form the full 32-bit message code. The default value of
+ this keyword is:
+
+ SeverityNames=(
+   Success=0x0
+   Informational=0x1
+   Warning=0x2
+   Error=0x3
+   )
+
+ Severity values occupy the high two bits of a 32-bit message code.
+ Any severity value that does not fit in two bits is an error. The
+ severity codes can be given symbolic names by following each value
+ with :name
+
+
+FacilityNames=(System=0x0:FACILITY_SYSTEM
+               Runtime=0x2:FACILITY_RUNTIME
+               Stubs=0x3:FACILITY_STUBS
+               Io=0x4:FACILITY_IO_ERROR_CODE
+              )
+
+ The FacilityNames keyword defines the set of names that are allowed
+ as the value of the Facility keyword in the message definition. The
+ set is delimited by left and right parentheses. Associated with each
+ facility name is a number that, when shift it left by 16 bits, gives
+ the bit pattern to logical-OR with the Severity value and MessageId
+ value to form the full 32-bit message code. The default value of
+ this keyword is:
+
+ FacilityNames=(
+   System=0x0FF
+   Application=0xFFF
+   )
+
+ Facility codes occupy the low order 12 bits of the high order
+ 16-bits of a 32-bit message code. Any facility code that does not
+ fit in 12 bits is an error. This allows for 4,096 facility codes.
+ The first 256 codes are reserved for use by the system software. The
+ facility codes can be given symbolic names by following each value
+ with :name
+
+
+ The LanguageNames keyword defines the set of names that are allowed
+ as the value of the Language keyword in the message definition. The
+ set is delimited by left and right parentheses. Associated with each
+ language name is a number and a file name that are used to name the
+ generated resource file that contains the messages for that
+ language. The number corresponds to the language identifier to use
+ in the resource table. The number is separated from the file name
+ with a colon. The initial value of LanguageNames is:
+
+ LanguageNames=(English=1:MSG00001)
+
+ Any new names in the source file which don't override the built-in
+ names are added to the list of valid languages. This allows an
+ application to support private languages with descriptive names.
+
+
+-------------------------------------------------------------------------
+ MESSAGE DEFINITION SECTION
+
+ Following the header section is the body of the Message Compiler
+ source file. The body consists of zero or more message definitions.
+ Each message definition begins with one or more of the following
+ statements:
+
+ MessageId = [number|+number]
+ Severity = severity_name
+ Facility = facility_name
+ SymbolicName = name
+
+ The MessageId statement marks the beginning of the message
+ definition. A MessageID statement is required for each message,
+ although the value is optional. If no value is specified, the value
+ used is the previous value for the facility plus one. If the value
+ is specified as +number then the value used is the previous value
+ for the facility, plus the number after the plus sign. Otherwise, if
+ a numeric value is given, that value is used. Any MessageId value
+ that does not fit in 16 bits is an error.
+
+ The Severity and Facility statements are optional. These statements
+ specify additional bits to OR into the final 32-bit message code. If
+ not specified they default to the value last specified for a message
+ definition. The initial values prior to processing the first message
+ definition are:
+
+ Severity=Success
+ Facility=Application
+
+ The value associated with Severity and Facility must match one of
+ the names given in the FacilityNames and SeverityNames statements in
+ the header section. The SymbolicName statement allows you to
+ associate a C/C++ symbolic constant with the final 32-bit message
+ code.
+ */
+//
+//  Values are 32 bit values laid out as follows:
+//
+//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+//  +---+-+-+-----------------------+-------------------------------+
+//  |Sev|C|R|     Facility          |               Code            |
+//  +---+-+-+-----------------------+-------------------------------+
+//
+//  where
+//
+//      Sev - is the severity code
+//
+//          00 - Success
+//          01 - Informational
+//          10 - Warning
+//          11 - Error
+//
+//      C - is the Customer code flag
+//
+//      R - is a reserved bit
+//
+//      Facility - is the facility code
+//
+//      Code - is the facility's status code
+//
+//
+// Define the facility codes
+//
+
+
+//
+// Define the severity codes
+//
+#define STATUS_SEVERITY_WARNING          0x2
+#define STATUS_SEVERITY_SUCCESS          0x0
+#define STATUS_SEVERITY_INFORMATIONAL    0x1
+#define STATUS_SEVERITY_ERROR            0x3
+
+
+//
+// MessageId: NTP_ERROR
+//
+// MessageText:
+//
+// %1
+//
+#define NTP_ERROR                        ((DWORD)0xC0000001L)
+
+//
+// MessageId: NTP_WARNING
+//
+// MessageText:
+//
+// %1
+// 
+//
+#define NTP_WARNING                      ((DWORD)0x80000002L)
+
+//
+// MessageId: NTP_INFO
+//
+// MessageText:
+//
+// %1
+// 
+// 
+// 
+//
+#define NTP_INFO                         ((DWORD)0x40000003L)
+