(**************************************************************************) (* *) (* OCaml *) (* *) (* Xavier Leroy, projet Cristal, INRIA Rocquencourt *) (* *) (* Copyright 1996 Institut National de Recherche en Informatique et *) (* en Automatique. *) (* *) (* All rights reserved. This file is distributed under the terms of *) (* the GNU Lesser General Public License version 2.1, with the *) (* special exception on linking described in the file LICENSE. *) (* *) (**************************************************************************) (* NOTE: If this file is unixLabels.mli, run tools/sync_stdlib_docs after editing it to generate unix.mli. If this file is unix.mli, do not edit it directly -- edit unixLabels.mli instead. *) (* NOTE: When a new function is added which is not implemented on Windows (or partially implemented), or the Windows-status of an existing function is changed, remember to update the summary table in manual/src/library/libunix.etex *) (** Interface to the Unix system. To use the labeled version of this module, add [module Unix][ = ][UnixLabels] in your implementation. Note: all the functions of this module (except {!error_message} and {!handle_unix_error}) are liable to raise the {!Unix_error} exception whenever the underlying system call signals an error. *) (** {1 Error report} *) type error = Unix.error = E2BIG (** Argument list too long *) | EACCES (** Permission denied *) | EAGAIN (** Resource temporarily unavailable; try again *) | EBADF (** Bad file descriptor *) | EBUSY (** Resource unavailable *) | ECHILD (** No child process *) | EDEADLK (** Resource deadlock would occur *) | EDOM (** Domain error for math functions, etc. *) | EEXIST (** File exists *) | EFAULT (** Bad address *) | EFBIG (** File too large *) | EINTR (** Function interrupted by signal *) | EINVAL (** Invalid argument *) | EIO (** Hardware I/O error *) | EISDIR (** Is a directory *) | EMFILE (** Too many open files by the process *) | EMLINK (** Too many links *) | ENAMETOOLONG (** Filename too long *) | ENFILE (** Too many open files in the system *) | ENODEV (** No such device *) | ENOENT (** No such file or directory *) | ENOEXEC (** Not an executable file *) | ENOLCK (** No locks available *) | ENOMEM (** Not enough memory *) | ENOSPC (** No space left on device *) | ENOSYS (** Function not supported *) | ENOTDIR (** Not a directory *) | ENOTEMPTY (** Directory not empty *) | ENOTTY (** Inappropriate I/O control operation *) | ENXIO (** No such device or address *) | EPERM (** Operation not permitted *) | EPIPE (** Broken pipe *) | ERANGE (** Result too large *) | EROFS (** Read-only file system *) | ESPIPE (** Invalid seek e.g. on a pipe *) | ESRCH (** No such process *) | EXDEV (** Invalid link *) | EWOULDBLOCK (** Operation would block *) | EINPROGRESS (** Operation now in progress *) | EALREADY (** Operation already in progress *) | ENOTSOCK (** Socket operation on non-socket *) | EDESTADDRREQ (** Destination address required *) | EMSGSIZE (** Message too long *) | EPROTOTYPE (** Protocol wrong type for socket *) | ENOPROTOOPT (** Protocol not available *) | EPROTONOSUPPORT (** Protocol not supported *) | ESOCKTNOSUPPORT (** Socket type not supported *) | EOPNOTSUPP (** Operation not supported on socket *) | EPFNOSUPPORT (** Protocol family not supported *) | EAFNOSUPPORT (** Address family not supported by protocol family *) | EADDRINUSE (** Address already in use *) | EADDRNOTAVAIL (** Can't assign requested address *) | ENETDOWN (** Network is down *) | ENETUNREACH (** Network is unreachable *) | ENETRESET (** Network dropped connection on reset *) | ECONNABORTED (** Software caused connection abort *) | ECONNRESET (** Connection reset by peer *) | ENOBUFS (** No buffer space available *) | EISCONN (** Socket is already connected *) | ENOTCONN (** Socket is not connected *) | ESHUTDOWN (** Can't send after socket shutdown *) | ETOOMANYREFS (** Too many references: can't splice *) | ETIMEDOUT (** Connection timed out *) | ECONNREFUSED (** Connection refused *) | EHOSTDOWN (** Host is down *) | EHOSTUNREACH (** No route to host *) | ELOOP (** Too many levels of symbolic links *) | EOVERFLOW (** File size or position not representable *) | EUNKNOWNERR of int (** Unknown error *) (** The type of error codes. Errors defined in the POSIX standard and additional errors from UNIX98 and BSD. All other errors are mapped to EUNKNOWNERR. *) exception Unix_error of error * string * string (** Raised by the system calls below when an error is encountered. The first component is the error code; the second component is the function name; the third component is the string parameter to the function, if it has one, or the empty string otherwise. {!UnixLabels.Unix_error} and {!Unix.Unix_error} are the same, and catching one will catch the other. *) val error_message : error -> string (** Return a string describing the given error code. *) val handle_unix_error : ('a -> 'b) -> 'a -> 'b (** [handle_unix_error f x] applies [f] to [x] and returns the result. If the exception {!Unix_error} is raised, it prints a message describing the error and exits with code 2. *) (** {1 Access to the process environment} *) val environment : unit -> string array (** Return the process environment, as an array of strings with the format ``variable=value''. The returned array is empty if the process has special privileges. *) val unsafe_environment : unit -> string array (** Return the process environment, as an array of strings with the format ``variable=value''. Unlike {!environment}, this function returns a populated array even if the process has special privileges. See the documentation for {!unsafe_getenv} for more details. @since 4.06 (4.12 in UnixLabels) *) val getenv : string -> string (** Return the value associated to a variable in the process environment, unless the process has special privileges. @raise Not_found if the variable is unbound or the process has special privileges. This function is identical to {!Sys.getenv}. *) val unsafe_getenv : string -> string (** Return the value associated to a variable in the process environment. Unlike {!getenv}, this function returns the value even if the process has special privileges. It is considered unsafe because the programmer of a setuid or setgid program must be careful to avoid using maliciously crafted environment variables in the search path for executables, the locations for temporary files or logs, and the like. @raise Not_found if the variable is unbound. @since 4.06 *) val putenv : string -> string -> unit (** [putenv name value] sets the value associated to a variable in the process environment. [name] is the name of the environment variable, and [value] its new associated value. *) (** {1 Process handling} *) type process_status = Unix.process_status = WEXITED of int (** The process terminated normally by [exit]; the argument is the return code. *) | WSIGNALED of int (** The process was killed by a signal; the argument is the signal number. *) | WSTOPPED of int (** The process was stopped by a signal; the argument is the signal number. *) (** The termination status of a process. See module {!Sys} for the definitions of the standard signal numbers. Note that they are not the numbers used by the OS. On Windows: only [WEXITED] is used (as there are no inter-process signals) but with specific return codes to indicate special termination causes. Look for [NTSTATUS] values in the Windows documentation to decode such error return codes. In particular, [STATUS_ACCESS_VIOLATION] error code is the 32-bit [0xC0000005]: as [Int32.of_int 0xC0000005] is [-1073741819], [WEXITED -1073741819] is the Windows equivalent of [WSIGNALED Sys.sigsegv]. *) type wait_flag = Unix.wait_flag = WNOHANG (** Do not block if no child has died yet, but immediately return with a pid equal to 0. *) | WUNTRACED (** Report also the children that receive stop signals. *) (** Flags for {!waitpid}. *) val execv : prog:string -> args:string array -> 'a (** [execv ~prog ~args] execute the program in file [prog], with the arguments [args], and the current process environment. These [execv*] functions never return: on success, the current program is replaced by the new one. On Windows: the CRT simply spawns a new process and exits the current one. This will have unwanted consequences if e.g. another process is waiting on the current one. Using {!create_process} or one of the [open_process_*] functions instead is recommended. @raise Unix_error on failure *) val execve : prog:string -> args:string array -> env:string array -> 'a (** Same as {!execv}, except that the third argument provides the environment to the program executed. *) val execvp : prog:string -> args:string array -> 'a (** Same as {!execv}, except that the program is searched in the path. *) val execvpe : prog:string -> args:string array -> env:string array -> 'a (** Same as {!execve}, except that the program is searched in the path. *) val fork : unit -> int (** Fork a new process. The returned integer is 0 for the child process, the pid of the child process for the parent process. @raise Invalid_argument on Windows. Use {!create_process} or threads instead. *) val wait : unit -> int * process_status (** Wait until one of the children processes die, and return its pid and termination status. @raise Invalid_argument on Windows. Use {!waitpid} instead. *) val waitpid : mode:wait_flag list -> int -> int * process_status (** Same as {!wait}, but waits for the child process whose pid is given. A pid of [-1] means wait for any child. A pid of [0] means wait for any child in the same process group as the current process. Negative pid arguments represent process groups. The list of options indicates whether [waitpid] should return immediately without waiting, and whether it should report stopped children. On Windows: can only wait for a given PID, not any child process. *) val system : string -> process_status (** Execute the given command, wait until it terminates, and return its termination status. The string is interpreted by the shell [/bin/sh] (or the command interpreter [cmd.exe] on Windows) and therefore can contain redirections, quotes, variables, etc. To properly quote whitespace and shell special characters occurring in file names or command arguments, the use of {!Filename.quote_command} is recommended. The result [WEXITED 127] indicates that the shell couldn't be executed. *) val _exit : int -> 'a (** Terminate the calling process immediately, returning the given status code to the operating system: usually 0 to indicate no errors, and a small positive integer to indicate failure. Unlike {!Stdlib.exit}, {!Unix._exit} performs no finalization whatsoever: functions registered with {!Stdlib.at_exit} are not called, input/output channels are not flushed, and the C run-time system is not finalized either. The typical use of {!Unix._exit} is after a {!Unix.fork} operation, when the child process runs into a fatal error and must exit. In this case, it is preferable to not perform any finalization action in the child process, as these actions could interfere with similar actions performed by the parent process. For example, output channels should not be flushed by the child process, as the parent process may flush them again later, resulting in duplicate output. @since 4.12 *) val getpid : unit -> int (** Return the pid of the process. *) val getppid : unit -> int (** Return the pid of the parent process. @raise Invalid_argument on Windows (because it is meaningless) *) val nice : int -> int (** Change the process priority. The integer argument is added to the ``nice'' value. (Higher values of the ``nice'' value mean lower priorities.) Return the new nice value. @raise Invalid_argument on Windows *) (** {1 Basic file input/output} *) type file_descr = Unix.file_descr (** The abstract type of file descriptors. *) val stdin : file_descr (** File descriptor for standard input.*) val stdout : file_descr (** File descriptor for standard output.*) val stderr : file_descr (** File descriptor for standard error. *) type open_flag = Unix.open_flag = O_RDONLY (** Open for reading *) | O_WRONLY (** Open for writing *) | O_RDWR (** Open for reading and writing *) | O_NONBLOCK (** Open in non-blocking mode *) | O_APPEND (** Open for append *) | O_CREAT (** Create if nonexistent *) | O_TRUNC (** Truncate to 0 length if existing *) | O_EXCL (** Fail if existing *) | O_NOCTTY (** Don't make this dev a controlling tty *) | O_DSYNC (** Writes complete as `Synchronised I/O data integrity completion' *) | O_SYNC (** Writes complete as `Synchronised I/O file integrity completion' *) | O_RSYNC (** Reads complete as writes (depending on O_SYNC/O_DSYNC) *) | O_SHARE_DELETE (** Windows only: allow the file to be deleted while still open *) | O_CLOEXEC (** Set the close-on-exec flag on the descriptor returned by {!openfile}. See {!set_close_on_exec} for more information. *) | O_KEEPEXEC (** Clear the close-on-exec flag. This is currently the default. *) (** The flags to {!openfile}. *) type file_perm = int (** The type of file access rights, e.g. [0o640] is read and write for user, read for group, none for others *) val openfile : string -> mode:open_flag list -> perm:file_perm -> file_descr (** Open the named file with the given flags. Third argument is the permissions to give to the file if it is created (see {!umask}). Return a file descriptor on the named file. *) val close : file_descr -> unit (** Close a file descriptor. *) val fsync : file_descr -> unit (** Flush file buffers to disk. @since 4.08 (4.12 in UnixLabels) *) val read : file_descr -> buf:bytes -> pos:int -> len:int -> int (** [read fd ~buf ~pos ~len] reads [len] bytes from descriptor [fd], storing them in byte sequence [buf], starting at position [pos] in [buf]. Return the number of bytes actually read. *) val write : file_descr -> buf:bytes -> pos:int -> len:int -> int (** [write fd ~buf ~pos ~len] writes [len] bytes to descriptor [fd], taking them from byte sequence [buf], starting at position [pos] in [buff]. Return the number of bytes actually written. [write] repeats the writing operation until all bytes have been written or an error occurs. *) val single_write : file_descr -> buf:bytes -> pos:int -> len:int -> int (** Same as {!write}, but attempts to write only once. Thus, if an error occurs, [single_write] guarantees that no data has been written. *) val write_substring : file_descr -> buf:string -> pos:int -> len:int -> int (** Same as {!write}, but take the data from a string instead of a byte sequence. @since 4.02 *) val single_write_substring : file_descr -> buf:string -> pos:int -> len:int -> int (** Same as {!single_write}, but take the data from a string instead of a byte sequence. @since 4.02 *) (** {1 Interfacing with the standard input/output library} *) val in_channel_of_descr : file_descr -> in_channel (** Create an input channel reading from the given descriptor. The channel is initially in binary mode; use [set_binary_mode_in ic false] if text mode is desired. Text mode is supported only if the descriptor refers to a file or pipe, but is not supported if it refers to a socket. On Windows: {!Stdlib.set_binary_mode_in} always fails on channels created with this function. Beware that input channels are buffered, so more characters may have been read from the descriptor than those accessed using channel functions. Channels also keep a copy of the current position in the file. Closing the channel [ic] returned by [in_channel_of_descr fd] using [close_in ic] also closes the underlying descriptor [fd]. It is incorrect to close both the channel [ic] and the descriptor [fd]. If several channels are created on the same descriptor, one of the channels must be closed, but not the others. Consider for example a descriptor [s] connected to a socket and two channels [ic = in_channel_of_descr s] and [oc = out_channel_of_descr s]. The recommended closing protocol is to perform [close_out oc], which flushes buffered output to the socket then closes the socket. The [ic] channel must not be closed and will be collected by the GC eventually. *) val out_channel_of_descr : file_descr -> out_channel (** Create an output channel writing on the given descriptor. The channel is initially in binary mode; use [set_binary_mode_out oc false] if text mode is desired. Text mode is supported only if the descriptor refers to a file or pipe, but is not supported if it refers to a socket. On Windows: {!Stdlib.set_binary_mode_out} always fails on channels created with this function. Beware that output channels are buffered, so you may have to call {!Stdlib.flush} to ensure that all data has been sent to the descriptor. Channels also keep a copy of the current position in the file. Closing the channel [oc] returned by [out_channel_of_descr fd] using [close_out oc] also closes the underlying descriptor [fd]. It is incorrect to close both the channel [ic] and the descriptor [fd]. See {!Unix.in_channel_of_descr} for a discussion of the closing protocol when several channels are created on the same descriptor. *) val descr_of_in_channel : in_channel -> file_descr (** Return the descriptor corresponding to an input channel. *) val descr_of_out_channel : out_channel -> file_descr (** Return the descriptor corresponding to an output channel. *) (** {1 Seeking and truncating} *) type seek_command = Unix.seek_command = SEEK_SET (** indicates positions relative to the beginning of the file *) | SEEK_CUR (** indicates positions relative to the current position *) | SEEK_END (** indicates positions relative to the end of the file *) (** Positioning modes for {!lseek}. *) val lseek : file_descr -> int -> mode:seek_command -> int (** Set the current position for a file descriptor, and return the resulting offset (from the beginning of the file). *) val truncate : string -> len:int -> unit (** Truncates the named file to the given size. *) val ftruncate : file_descr -> len:int -> unit (** Truncates the file corresponding to the given descriptor to the given size. *) (** {1 File status} *) type file_kind = Unix.file_kind = S_REG (** Regular file *) | S_DIR (** Directory *) | S_CHR (** Character device *) | S_BLK (** Block device *) | S_LNK (** Symbolic link *) | S_FIFO (** Named pipe *) | S_SOCK (** Socket *) type stats = Unix.stats = { st_dev : int; (** Device number *) st_ino : int; (** Inode number *) st_kind : file_kind; (** Kind of the file *) st_perm : file_perm; (** Access rights *) st_nlink : int; (** Number of links *) st_uid : int; (** User id of the owner *) st_gid : int; (** Group ID of the file's group *) st_rdev : int; (** Device ID (if special file) *) st_size : int; (** Size in bytes *) st_atime : float; (** Last access time *) st_mtime : float; (** Last modification time *) st_ctime : float; (** Last status change time *) } (** The information returned by the {!stat} calls. *) val stat : string -> stats (** Return the information for the named file. *) val lstat : string -> stats (** Same as {!stat}, but in case the file is a symbolic link, return the information for the link itself. *) val fstat : file_descr -> stats (** Return the information for the file associated with the given descriptor. *) val isatty : file_descr -> bool (** Return [true] if the given file descriptor refers to a terminal or console window, [false] otherwise. *) (** {1 File operations on large files} *) module LargeFile : sig val lseek : file_descr -> int64 -> mode:seek_command -> int64 (** See [lseek]. *) val truncate : string -> len:int64 -> unit (** See [truncate]. *) val ftruncate : file_descr -> len:int64 -> unit (** See [ftruncate]. *) type stats = Unix.LargeFile.stats = { st_dev : int; (** Device number *) st_ino : int; (** Inode number *) st_kind : file_kind; (** Kind of the file *) st_perm : file_perm; (** Access rights *) st_nlink : int; (** Number of links *) st_uid : int; (** User id of the owner *) st_gid : int; (** Group ID of the file's group *) st_rdev : int; (** Device ID (if special file) *) st_size : int64; (** Size in bytes *) st_atime : float; (** Last access time *) st_mtime : float; (** Last modification time *) st_ctime : float; (** Last status change time *) } val stat : string -> stats val lstat : string -> stats val fstat : file_descr -> stats end (** File operations on large files. This sub-module provides 64-bit variants of the functions {!lseek} (for positioning a file descriptor), {!truncate} and {!ftruncate} (for changing the size of a file), and {!stat}, {!lstat} and {!fstat} (for obtaining information on files). These alternate functions represent positions and sizes by 64-bit integers (type [int64]) instead of regular integers (type [int]), thus allowing operating on files whose sizes are greater than [max_int]. *) (** {1 Mapping files into memory} *) val map_file : file_descr -> ?pos (* thwart tools/sync_stdlib_docs *):int64 -> kind:('a, 'b) Stdlib.Bigarray.kind -> layout:'c Stdlib.Bigarray.layout -> shared:bool -> dims:int array -> ('a, 'b, 'c) Stdlib.Bigarray.Genarray.t (** Memory mapping of a file as a Bigarray. [map_file fd ~kind ~layout ~shared ~dims] returns a Bigarray of kind [kind], layout [layout], and dimensions as specified in [dims]. The data contained in this Bigarray are the contents of the file referred to by the file descriptor [fd] (as opened previously with {!openfile}, for example). The optional [pos] parameter is the byte offset in the file of the data being mapped; it defaults to 0 (map from the beginning of the file). If [shared] is [true], all modifications performed on the array are reflected in the file. This requires that [fd] be opened with write permissions. If [shared] is [false], modifications performed on the array are done in memory only, using copy-on-write of the modified pages; the underlying file is not affected. {!map_file} is much more efficient than reading the whole file in a Bigarray, modifying that Bigarray, and writing it afterwards. To adjust automatically the dimensions of the Bigarray to the actual size of the file, the major dimension (that is, the first dimension for an array with C layout, and the last dimension for an array with Fortran layout) can be given as [-1]. {!map_file} then determines the major dimension from the size of the file. The file must contain an integral number of sub-arrays as determined by the non-major dimensions, otherwise [Failure] is raised. If all dimensions of the Bigarray are given, the file size is matched against the size of the Bigarray. If the file is larger than the Bigarray, only the initial portion of the file is mapped to the Bigarray. If the file is smaller than the big array, the file is automatically grown to the size of the Bigarray. This requires write permissions on [fd]. Array accesses are bounds-checked, but the bounds are determined by the initial call to [map_file]. Therefore, you should make sure no other process modifies the mapped file while you're accessing it, or a SIGBUS signal may be raised. This happens, for instance, if the file is shrunk. [Invalid_argument] or [Failure] may be raised in cases where argument validation fails. @since 4.06 *) (** {1 Operations on file names} *) val unlink : string -> unit (** Removes the named file. If the named file is a directory, raises: {ul {- [EPERM] on POSIX compliant system} {- [EISDIR] on Linux >= 2.1.132} {- [EACCESS] on Windows}} *) val rename : src:string -> dst:string -> unit (** [rename ~src ~dst] changes the name of a file from [src] to [dst], moving it between directories if needed. If [dst] already exists, its contents will be replaced with those of [src]. Depending on the operating system, the metadata (permissions, owner, etc) of [dst] can either be preserved or be replaced by those of [src]. *) val link : ?follow (* thwart tools/sync_stdlib_docs *) :bool -> src:string -> dst:string -> unit (** [link ?follow ~src ~dst] creates a hard link named [dst] to the file named [src]. @param follow indicates whether a [src] symlink is followed or a hardlink to [src] itself will be created. On {e Unix} systems this is done using the [linkat(2)] function. If [?follow] is not provided, then the [link(2)] function is used whose behaviour is OS-dependent, but more widely available. @raise ENOSYS On {e Unix} if [~follow:_] is requested, but linkat is unavailable. @raise ENOSYS On {e Windows} if [~follow:false] is requested. *) val realpath : string -> string (** [realpath p] is an absolute pathname for [p] obtained by resolving all extra [/] characters, relative path segments and symbolic links. @since 4.13 *) (** {1 File permissions and ownership} *) type access_permission = Unix.access_permission = R_OK (** Read permission *) | W_OK (** Write permission *) | X_OK (** Execution permission *) | F_OK (** File exists *) (** Flags for the {!access} call. *) val chmod : string -> perm:file_perm -> unit (** Change the permissions of the named file. *) val fchmod : file_descr -> perm:file_perm -> unit (** Change the permissions of an opened file. @raise Invalid_argument on Windows *) val chown : string -> uid:int -> gid:int -> unit (** Change the owner uid and owner gid of the named file. @raise Invalid_argument on Windows *) val fchown : file_descr -> uid:int -> gid:int -> unit (** Change the owner uid and owner gid of an opened file. @raise Invalid_argument on Windows *) val umask : file_perm -> file_perm (** Set the process's file mode creation mask, and return the previous mask. @raise Invalid_argument on Windows *) val access : string -> perm:access_permission list -> unit (** Check that the process has the given permissions over the named file. On Windows: execute permission [X_OK] cannot be tested, just tests for read permission instead. @raise Unix_error otherwise. *) (** {1 Operations on file descriptors} *) val dup : ?cloexec: (* thwart tools/sync_stdlib_docs *) bool -> file_descr -> file_descr (** Return a new file descriptor referencing the same file as the given descriptor. See {!set_close_on_exec} for documentation on the [cloexec] optional argument. *) val dup2 : ?cloexec: (* thwart tools/sync_stdlib_docs *) bool -> src:file_descr -> dst:file_descr -> unit (** [dup2 ~src ~dst] duplicates [src] to [dst], closing [dst] if already opened. See {!set_close_on_exec} for documentation on the [cloexec] optional argument. *) val set_nonblock : file_descr -> unit (** Set the ``non-blocking'' flag on the given descriptor. When the non-blocking flag is set, reading on a descriptor on which there is temporarily no data available raises the [EAGAIN] or [EWOULDBLOCK] error instead of blocking; writing on a descriptor on which there is temporarily no room for writing also raises [EAGAIN] or [EWOULDBLOCK]. *) val clear_nonblock : file_descr -> unit (** Clear the ``non-blocking'' flag on the given descriptor. See {!set_nonblock}.*) val set_close_on_exec : file_descr -> unit (** Set the ``close-on-exec'' flag on the given descriptor. A descriptor with the close-on-exec flag is automatically closed when the current process starts another program with one of the [exec], [create_process] and [open_process] functions. It is often a security hole to leak file descriptors opened on, say, a private file to an external program: the program, then, gets access to the private file and can do bad things with it. Hence, it is highly recommended to set all file descriptors ``close-on-exec'', except in the very few cases where a file descriptor actually needs to be transmitted to another program. The best way to set a file descriptor ``close-on-exec'' is to create it in this state. To this end, the [openfile] function has [O_CLOEXEC] and [O_KEEPEXEC] flags to enforce ``close-on-exec'' mode or ``keep-on-exec'' mode, respectively. All other operations in the Unix module that create file descriptors have an optional argument [?cloexec:bool] to indicate whether the file descriptor should be created in ``close-on-exec'' mode (by writing [~cloexec:true]) or in ``keep-on-exec'' mode (by writing [~cloexec:false]). For historical reasons, the default file descriptor creation mode is ``keep-on-exec'', if no [cloexec] optional argument is given. This is not a safe default, hence it is highly recommended to pass explicit [cloexec] arguments to operations that create file descriptors. The [cloexec] optional arguments and the [O_KEEPEXEC] flag were introduced in OCaml 4.05. Earlier, the common practice was to create file descriptors in the default, ``keep-on-exec'' mode, then call [set_close_on_exec] on those freshly-created file descriptors. This is not as safe as creating the file descriptor in ``close-on-exec'' mode because, in multithreaded programs, a window of vulnerability exists between the time when the file descriptor is created and the time [set_close_on_exec] completes. If another thread spawns another program during this window, the descriptor will leak, as it is still in the ``keep-on-exec'' mode. Regarding the atomicity guarantees given by [~cloexec:true] or by the use of the [O_CLOEXEC] flag: on all platforms it is guaranteed that a concurrently-executing Caml thread cannot leak the descriptor by starting a new process. On Linux, this guarantee extends to concurrently-executing C threads. As of Feb 2017, other operating systems lack the necessary system calls and still expose a window of vulnerability during which a C thread can see the newly-created file descriptor in ``keep-on-exec'' mode. *) val clear_close_on_exec : file_descr -> unit (** Clear the ``close-on-exec'' flag on the given descriptor. See {!set_close_on_exec}.*) (** {1 Directories} *) val mkdir : string -> perm:file_perm -> unit (** Create a directory with the given permissions (see {!umask}). *) val rmdir : string -> unit (** Remove an empty directory. *) val chdir : string -> unit (** Change the process working directory. *) val getcwd : unit -> string (** Return the name of the current working directory. *) val chroot : string -> unit (** Change the process root directory. @raise Invalid_argument on Windows *) type dir_handle = Unix.dir_handle (** The type of descriptors over opened directories. *) val opendir : string -> dir_handle (** Open a descriptor on a directory *) val readdir : dir_handle -> string (** Return the next entry in a directory. @raise End_of_file when the end of the directory has been reached. *) val rewinddir : dir_handle -> unit (** Reposition the descriptor to the beginning of the directory *) val closedir : dir_handle -> unit (** Close a directory descriptor. *) (** {1 Pipes and redirections} *) val pipe : ?cloexec: (* thwart tools/sync_stdlib_docs *) bool -> unit -> file_descr * file_descr (** Create a pipe. The first component of the result is opened for reading, that's the exit to the pipe. The second component is opened for writing, that's the entrance to the pipe. See {!set_close_on_exec} for documentation on the [cloexec] optional argument. *) val mkfifo : string -> perm:file_perm -> unit (** Create a named pipe with the given permissions (see {!umask}). @raise Invalid_argument on Windows *) (** {1 High-level process and redirection management} *) val create_process : prog:string -> args:string array -> stdin:file_descr -> stdout:file_descr -> stderr:file_descr -> int (** [create_process ~prog ~args ~stdin ~stdout ~stderr] creates a new process that executes the program in file [prog], with arguments [args]. The pid of the new process is returned immediately; the new process executes concurrently with the current process. The standard input and outputs of the new process are connected to the descriptors [stdin], [stdout] and [stderr]. Passing e.g. {!Unix.stdout} for [stdout] prevents the redirection and causes the new process to have the same standard output as the current process. The executable file [prog] is searched in the path. The new process has the same environment as the current process. *) val create_process_env : prog:string -> args:string array -> env:string array -> stdin:file_descr -> stdout:file_descr -> stderr:file_descr -> int (** [create_process_env ~prog ~args ~env ~stdin ~stdout ~stderr] works as {!create_process}, except that the extra argument [env] specifies the environment passed to the program. *) val open_process_in : string -> in_channel (** High-level pipe and process management. This function runs the given command in parallel with the program. The standard output of the command is redirected to a pipe, which can be read via the returned input channel. The command is interpreted by the shell [/bin/sh] (or [cmd.exe] on Windows), cf. {!system}. The {!Filename.quote_command} function can be used to quote the command and its arguments as appropriate for the shell being used. If the command does not need to be run through the shell, {!open_process_args_in} can be used as a more robust and more efficient alternative to {!open_process_in}. *) val open_process_out : string -> out_channel (** Same as {!open_process_in}, but redirect the standard input of the command to a pipe. Data written to the returned output channel is sent to the standard input of the command. Warning: writes on output channels are buffered, hence be careful to call {!Stdlib.flush} at the right times to ensure correct synchronization. If the command does not need to be run through the shell, {!open_process_args_out} can be used instead of {!open_process_out}. *) val open_process : string -> in_channel * out_channel (** Same as {!open_process_out}, but redirects both the standard input and standard output of the command to pipes connected to the two returned channels. The input channel is connected to the output of the command, and the output channel to the input of the command. If the command does not need to be run through the shell, {!open_process_args} can be used instead of {!open_process}. *) val open_process_full : string -> env:string array -> in_channel * out_channel * in_channel (** Similar to {!open_process}, but the second argument specifies the environment passed to the command. The result is a triple of channels connected respectively to the standard output, standard input, and standard error of the command. If the command does not need to be run through the shell, {!open_process_args_full} can be used instead of {!open_process_full}. *) val open_process_args : string -> string array -> in_channel * out_channel (** [open_process_args prog args] runs the program [prog] with arguments [args]. Note that the first argument is by convention the filename of the program being executed, just like [Sys.argv.(0)]. The new process executes concurrently with the current process. The standard input and output of the new process are redirected to pipes, which can be respectively read and written via the returned channels. The input channel is connected to the output of the program, and the output channel to the input of the program. Warning: writes on output channels are buffered, hence be careful to call {!Stdlib.flush} at the right times to ensure correct synchronization. The executable file [prog] is searched for in the path. This behaviour changed in 4.12; previously [prog] was looked up only in the current directory. The new process has the same environment as the current process. @since 4.08 *) val open_process_args_in : string -> string array -> in_channel (** Same as {!open_process_args}, but redirects only the standard output of the new process. @since 4.08 *) val open_process_args_out : string -> string array -> out_channel (** Same as {!open_process_args}, but redirects only the standard input of the new process. @since 4.08 *) val open_process_args_full : string -> string array -> string array -> in_channel * out_channel * in_channel (** Similar to {!open_process_args}, but the third argument specifies the environment passed to the new process. The result is a triple of channels connected respectively to the standard output, standard input, and standard error of the program. @since 4.08 *) val process_in_pid : in_channel -> int (** Return the pid of a process opened via {!open_process_in} or {!open_process_args_in}. @since 4.08 (4.12 in UnixLabels) *) val process_out_pid : out_channel -> int (** Return the pid of a process opened via {!open_process_out} or {!open_process_args_out}. @since 4.08 (4.12 in UnixLabels) *) val process_pid : in_channel * out_channel -> int (** Return the pid of a process opened via {!open_process} or {!open_process_args}. @since 4.08 (4.12 in UnixLabels) *) val process_full_pid : in_channel * out_channel * in_channel -> int (** Return the pid of a process opened via {!open_process_full} or {!open_process_args_full}. @since 4.08 (4.12 in UnixLabels) *) val close_process_in : in_channel -> process_status (** Close channels opened by {!open_process_in}, wait for the associated command to terminate, and return its termination status. *) val close_process_out : out_channel -> process_status (** Close channels opened by {!open_process_out}, wait for the associated command to terminate, and return its termination status. *) val close_process : in_channel * out_channel -> process_status (** Close channels opened by {!open_process}, wait for the associated command to terminate, and return its termination status. *) val close_process_full : in_channel * out_channel * in_channel -> process_status (** Close channels opened by {!open_process_full}, wait for the associated command to terminate, and return its termination status. *) (** {1 Symbolic links} *) val symlink : ?to_dir: (* thwart tools/sync_stdlib_docs *) bool -> src:string -> dst:string -> unit (** [symlink ?to_dir ~src ~dst] creates the file [dst] as a symbolic link to the file [src]. On Windows, [~to_dir] indicates if the symbolic link points to a directory or a file; if omitted, [symlink] examines [src] using [stat] and picks appropriately, if [src] does not exist then [false] is assumed (for this reason, it is recommended that the [~to_dir] parameter be specified in new code). On Unix, [~to_dir] is ignored. Windows symbolic links are available in Windows Vista onwards. There are some important differences between Windows symlinks and their POSIX counterparts. Windows symbolic links come in two flavours: directory and regular, which designate whether the symbolic link points to a directory or a file. The type must be correct - a directory symlink which actually points to a file cannot be selected with chdir and a file symlink which actually points to a directory cannot be read or written (note that Cygwin's emulation layer ignores this distinction). When symbolic links are created to existing targets, this distinction doesn't matter and [symlink] will automatically create the correct kind of symbolic link. The distinction matters when a symbolic link is created to a non-existent target. The other caveat is that by default symbolic links are a privileged operation. Administrators will always need to be running elevated (or with UAC disabled) and by default normal user accounts need to be granted the SeCreateSymbolicLinkPrivilege via Local Security Policy (secpol.msc) or via Active Directory. {!has_symlink} can be used to check that a process is able to create symbolic links. *) val has_symlink : unit -> bool (** Returns [true] if the user is able to create symbolic links. On Windows, this indicates that the user not only has the SeCreateSymbolicLinkPrivilege but is also running elevated, if necessary. On other platforms, this is simply indicates that the symlink system call is available. @since 4.03 *) val readlink : string -> string (** Read the contents of a symbolic link. *) (** {1 Polling} *) val select : read:file_descr list -> write:file_descr list -> except:file_descr list -> timeout:float -> file_descr list * file_descr list * file_descr list (** Wait until some input/output operations become possible on some channels. The three list arguments are, respectively, a set of descriptors to check for reading (first argument), for writing (second argument), or for exceptional conditions (third argument). The fourth argument is the maximal timeout, in seconds; a negative fourth argument means no timeout (unbounded wait). The result is composed of three sets of descriptors: those ready for reading (first component), ready for writing (second component), and over which an exceptional condition is pending (third component). *) (** {1 Locking} *) type lock_command = Unix.lock_command = F_ULOCK (** Unlock a region *) | F_LOCK (** Lock a region for writing, and block if already locked *) | F_TLOCK (** Lock a region for writing, or fail if already locked *) | F_TEST (** Test a region for other process locks *) | F_RLOCK (** Lock a region for reading, and block if already locked *) | F_TRLOCK (** Lock a region for reading, or fail if already locked *) (** Commands for {!lockf}. *) val lockf : file_descr -> mode:lock_command -> len:int -> unit (** [lockf fd ~mode ~len] puts a lock on a region of the file opened as [fd]. The region starts at the current read/write position for [fd] (as set by {!lseek}), and extends [len] bytes forward if [len] is positive, [len] bytes backwards if [len] is negative, or to the end of the file if [len] is zero. A write lock prevents any other process from acquiring a read or write lock on the region. A read lock prevents any other process from acquiring a write lock on the region, but lets other processes acquire read locks on it. The [F_LOCK] and [F_TLOCK] commands attempts to put a write lock on the specified region. The [F_RLOCK] and [F_TRLOCK] commands attempts to put a read lock on the specified region. If one or several locks put by another process prevent the current process from acquiring the lock, [F_LOCK] and [F_RLOCK] block until these locks are removed, while [F_TLOCK] and [F_TRLOCK] fail immediately with an exception. The [F_ULOCK] removes whatever locks the current process has on the specified region. Finally, the [F_TEST] command tests whether a write lock can be acquired on the specified region, without actually putting a lock. It returns immediately if successful, or fails otherwise. What happens when a process tries to lock a region of a file that is already locked by the same process depends on the OS. On POSIX-compliant systems, the second lock operation succeeds and may "promote" the older lock from read lock to write lock. On Windows, the second lock operation will block or fail. *) (** {1 Signals} Note: installation of signal handlers is performed via the functions {!Sys.signal} and {!Sys.set_signal}. *) val kill : pid:int -> signal:int -> unit (** [kill ~pid ~signal] sends signal number [signal] to the process with id [pid]. On Windows: only the {!Sys.sigkill} signal is emulated. *) type sigprocmask_command = Unix.sigprocmask_command = SIG_SETMASK | SIG_BLOCK | SIG_UNBLOCK val sigprocmask : mode:sigprocmask_command -> int list -> int list (** [sigprocmask ~mode sigs] changes the set of blocked signals. If [mode] is [SIG_SETMASK], blocked signals are set to those in the list [sigs]. If [mode] is [SIG_BLOCK], the signals in [sigs] are added to the set of blocked signals. If [mode] is [SIG_UNBLOCK], the signals in [sigs] are removed from the set of blocked signals. [sigprocmask] returns the set of previously blocked signals. When the systhreads version of the [Thread] module is loaded, this function redirects to [Thread.sigmask]. I.e., [sigprocmask] only changes the mask of the current thread. @raise Invalid_argument on Windows (no inter-process signals on Windows) *) val sigpending : unit -> int list (** Return the set of blocked signals that are currently pending. @raise Invalid_argument on Windows (no inter-process signals on Windows) *) val sigsuspend : int list -> unit (** [sigsuspend sigs] atomically sets the blocked signals to [sigs] and waits for a non-ignored, non-blocked signal to be delivered. On return, the blocked signals are reset to their initial value. @raise Invalid_argument on Windows (no inter-process signals on Windows) *) val pause : unit -> unit (** Wait until a non-ignored, non-blocked signal is delivered. @raise Invalid_argument on Windows (no inter-process signals on Windows) *) (** {1 Time functions} *) type process_times = Unix.process_times = { tms_utime : float; (** User time for the process *) tms_stime : float; (** System time for the process *) tms_cutime : float; (** User time for the children processes *) tms_cstime : float; (** System time for the children processes *) } (** The execution times (CPU times) of a process. *) type tm = Unix.tm = { tm_sec : int; (** Seconds 0..60 *) tm_min : int; (** Minutes 0..59 *) tm_hour : int; (** Hours 0..23 *) tm_mday : int; (** Day of month 1..31 *) tm_mon : int; (** Month of year 0..11 *) tm_year : int; (** Year - 1900 *) tm_wday : int; (** Day of week (Sunday is 0) *) tm_yday : int; (** Day of year 0..365 *) tm_isdst : bool; (** Daylight time savings in effect *) } (** The type representing wallclock time and calendar date. *) val time : unit -> float (** Return the current time since 00:00:00 GMT, Jan. 1, 1970, in seconds. *) val gettimeofday : unit -> float (** Same as {!time}, but with resolution better than 1 second. *) val gmtime : float -> tm (** Convert a time in seconds, as returned by {!time}, into a date and a time. Assumes UTC (Coordinated Universal Time), also known as GMT. To perform the inverse conversion, set the TZ environment variable to "UTC", use {!mktime}, and then restore the original value of TZ. *) val localtime : float -> tm (** Convert a time in seconds, as returned by {!time}, into a date and a time. Assumes the local time zone. The function performing the inverse conversion is {!mktime}. *) val mktime : tm -> float * tm (** Convert a date and time, specified by the [tm] argument, into a time in seconds, as returned by {!time}. The [tm_isdst], [tm_wday] and [tm_yday] fields of [tm] are ignored. Also return a normalized copy of the given [tm] record, with the [tm_wday], [tm_yday], and [tm_isdst] fields recomputed from the other fields, and the other fields normalized (so that, e.g., 40 October is changed into 9 November). The [tm] argument is interpreted in the local time zone. *) val alarm : int -> int (** Schedule a [SIGALRM] signal after the given number of seconds. @raise Invalid_argument on Windows *) val sleep : int -> unit (** Stop execution for the given number of seconds. *) val sleepf : float -> unit (** Stop execution for the given number of seconds. Like [sleep], but fractions of seconds are supported. @since 4.03 (4.12 in UnixLabels) *) val times : unit -> process_times (** Return the execution times of the process. On Windows: partially implemented, will not report timings for child processes. *) val utimes : string -> access:float -> modif:float -> unit (** Set the last access time (second arg) and last modification time (third arg) for a file. Times are expressed in seconds from 00:00:00 GMT, Jan. 1, 1970. If both times are [0.0], the access and last modification times are both set to the current time. *) type interval_timer = Unix.interval_timer = ITIMER_REAL (** decrements in real time, and sends the signal [SIGALRM] when expired.*) | ITIMER_VIRTUAL (** decrements in process virtual time, and sends [SIGVTALRM] when expired. *) | ITIMER_PROF (** (for profiling) decrements both when the process is running and when the system is running on behalf of the process; it sends [SIGPROF] when expired. *) (** The three kinds of interval timers. *) type interval_timer_status = Unix.interval_timer_status = { it_interval : float; (** Period *) it_value : float; (** Current value of the timer *) } (** The type describing the status of an interval timer *) val getitimer : interval_timer -> interval_timer_status (** Return the current status of the given interval timer. @raise Invalid_argument on Windows *) val setitimer : interval_timer -> interval_timer_status -> interval_timer_status (** [setitimer t s] sets the interval timer [t] and returns its previous status. The [s] argument is interpreted as follows: [s.it_value], if nonzero, is the time to the next timer expiration; [s.it_interval], if nonzero, specifies a value to be used in reloading [it_value] when the timer expires. Setting [s.it_value] to zero disables the timer. Setting [s.it_interval] to zero causes the timer to be disabled after its next expiration. @raise Invalid_argument on Windows *) (** {1 User id, group id} *) val getuid : unit -> int (** Return the user id of the user executing the process. On Windows: always returns [1]. *) val geteuid : unit -> int (** Return the effective user id under which the process runs. On Windows: always returns [1]. *) val setuid : int -> unit (** Set the real user id and effective user id for the process. @raise Invalid_argument on Windows *) val getgid : unit -> int (** Return the group id of the user executing the process. On Windows: always returns [1]. *) val getegid : unit -> int (** Return the effective group id under which the process runs. On Windows: always returns [1]. *) val setgid : int -> unit (** Set the real group id and effective group id for the process. @raise Invalid_argument on Windows *) val getgroups : unit -> int array (** Return the list of groups to which the user executing the process belongs. On Windows: always returns [[|1|]]. *) val setgroups : int array -> unit (** [setgroups groups] sets the supplementary group IDs for the calling process. Appropriate privileges are required. @raise Invalid_argument on Windows *) val initgroups : string -> int -> unit (** [initgroups user group] initializes the group access list by reading the group database /etc/group and using all groups of which [user] is a member. The additional group [group] is also added to the list. @raise Invalid_argument on Windows *) type passwd_entry = Unix.passwd_entry = { pw_name : string; pw_passwd : string; pw_uid : int; pw_gid : int; pw_gecos : string; pw_dir : string; pw_shell : string } (** Structure of entries in the [passwd] database. *) type group_entry = Unix.group_entry = { gr_name : string; gr_passwd : string; gr_gid : int; gr_mem : string array } (** Structure of entries in the [groups] database. *) val getlogin : unit -> string (** Return the login name of the user executing the process. *) val getpwnam : string -> passwd_entry (** Find an entry in [passwd] with the given name. @raise Not_found if no such entry exists, or always on Windows. *) val getgrnam : string -> group_entry (** Find an entry in [group] with the given name. @raise Not_found if no such entry exists, or always on Windows. *) val getpwuid : int -> passwd_entry (** Find an entry in [passwd] with the given user id. @raise Not_found if no such entry exists, or always on Windows. *) val getgrgid : int -> group_entry (** Find an entry in [group] with the given group id. @raise Not_found if no such entry exists, or always on Windows. *) (** {1 Internet addresses} *) type inet_addr = Unix.inet_addr (** The abstract type of Internet addresses. *) val inet_addr_of_string : string -> inet_addr (** Conversion from the printable representation of an Internet address to its internal representation. The argument string consists of 4 numbers separated by periods ([XXX.YYY.ZZZ.TTT]) for IPv4 addresses, and up to 8 numbers separated by colons for IPv6 addresses. @raise Failure when given a string that does not match these formats. *) val string_of_inet_addr : inet_addr -> string (** Return the printable representation of the given Internet address. See {!inet_addr_of_string} for a description of the printable representation. *) val inet_addr_any : inet_addr (** A special IPv4 address, for use only with [bind], representing all the Internet addresses that the host machine possesses. *) val inet_addr_loopback : inet_addr (** A special IPv4 address representing the host machine ([127.0.0.1]). *) val inet6_addr_any : inet_addr (** A special IPv6 address, for use only with [bind], representing all the Internet addresses that the host machine possesses. *) val inet6_addr_loopback : inet_addr (** A special IPv6 address representing the host machine ([::1]). *) val is_inet6_addr : inet_addr -> bool (** Whether the given [inet_addr] is an IPv6 address. @since 4.12 *) (** {1 Sockets} *) type socket_domain = Unix.socket_domain = PF_UNIX (** Unix domain *) | PF_INET (** Internet domain (IPv4) *) | PF_INET6 (** Internet domain (IPv6) *) (** The type of socket domains. Not all platforms support IPv6 sockets (type [PF_INET6]). On Windows: [PF_UNIX] supported since 4.14.0 on Windows 10 1803 and later. *) type socket_type = Unix.socket_type = SOCK_STREAM (** Stream socket *) | SOCK_DGRAM (** Datagram socket *) | SOCK_RAW (** Raw socket *) | SOCK_SEQPACKET (** Sequenced packets socket *) (** The type of socket kinds, specifying the semantics of communications. [SOCK_SEQPACKET] is included for completeness, but is rarely supported by the OS, and needs system calls that are not available in this library. *) type sockaddr = Unix.sockaddr = ADDR_UNIX of string | ADDR_INET of inet_addr * int (**) (** The type of socket addresses. [ADDR_UNIX name] is a socket address in the Unix domain; [name] is a file name in the file system. [ADDR_INET(addr,port)] is a socket address in the Internet domain; [addr] is the Internet address of the machine, and [port] is the port number. *) val socket : ?cloexec: (* thwart tools/sync_stdlib_docs *) bool -> domain:socket_domain -> kind:socket_type -> protocol:int -> file_descr (** Create a new socket in the given domain, and with the given kind. The third argument is the protocol type; 0 selects the default protocol for that kind of sockets. See {!set_close_on_exec} for documentation on the [cloexec] optional argument. *) val domain_of_sockaddr: sockaddr -> socket_domain (** Return the socket domain adequate for the given socket address. *) val socketpair : ?cloexec: (* thwart tools/sync_stdlib_docs *) bool -> domain:socket_domain -> kind:socket_type -> protocol:int -> file_descr * file_descr (** Create a pair of unnamed sockets, connected together. See {!set_close_on_exec} for documentation on the [cloexec] optional argument. *) val accept : ?cloexec: (* thwart tools/sync_stdlib_docs *) bool -> file_descr -> file_descr * sockaddr (** Accept connections on the given socket. The returned descriptor is a socket connected to the client; the returned address is the address of the connecting client. See {!set_close_on_exec} for documentation on the [cloexec] optional argument. *) val bind : file_descr -> addr:sockaddr -> unit (** Bind a socket to an address. *) val connect : file_descr -> addr:sockaddr -> unit (** Connect a socket to an address. *) val listen : file_descr -> max:int -> unit (** Set up a socket for receiving connection requests. The integer argument is the maximal number of pending requests. *) type shutdown_command = Unix.shutdown_command = SHUTDOWN_RECEIVE (** Close for receiving *) | SHUTDOWN_SEND (** Close for sending *) | SHUTDOWN_ALL (** Close both *) (** The type of commands for [shutdown]. *) val shutdown : file_descr -> mode:shutdown_command -> unit (** Shutdown a socket connection. [SHUTDOWN_SEND] as second argument causes reads on the other end of the connection to return an end-of-file condition. [SHUTDOWN_RECEIVE] causes writes on the other end of the connection to return a closed pipe condition ([SIGPIPE] signal). *) val getsockname : file_descr -> sockaddr (** Return the address of the given socket. *) val getpeername : file_descr -> sockaddr (** Return the address of the host connected to the given socket. *) type msg_flag = Unix.msg_flag = MSG_OOB | MSG_DONTROUTE | MSG_PEEK (**) (** The flags for {!recv}, {!recvfrom}, {!send} and {!sendto}. *) val recv : file_descr -> buf:bytes -> pos:int -> len:int -> mode:msg_flag list -> int (** Receive data from a connected socket. *) val recvfrom : file_descr -> buf:bytes -> pos:int -> len:int -> mode:msg_flag list -> int * sockaddr (** Receive data from an unconnected socket. *) val send : file_descr -> buf:bytes -> pos:int -> len:int -> mode:msg_flag list -> int (** Send data over a connected socket. *) val send_substring : file_descr -> buf:string -> pos:int -> len:int -> mode:msg_flag list -> int (** Same as [send], but take the data from a string instead of a byte sequence. @since 4.02 *) val sendto : file_descr -> buf:bytes -> pos:int -> len:int -> mode:msg_flag list -> addr:sockaddr -> int (** Send data over an unconnected socket. *) val sendto_substring : file_descr -> buf:string -> pos:int -> len:int -> mode:msg_flag list -> sockaddr -> int (** Same as [sendto], but take the data from a string instead of a byte sequence. @since 4.02 *) (** {1 Socket options} *) type socket_bool_option = Unix.socket_bool_option = SO_DEBUG (** Record debugging information *) | SO_BROADCAST (** Permit sending of broadcast messages *) | SO_REUSEADDR (** Allow reuse of local addresses for bind *) | SO_KEEPALIVE (** Keep connection active *) | SO_DONTROUTE (** Bypass the standard routing algorithms *) | SO_OOBINLINE (** Leave out-of-band data in line *) | SO_ACCEPTCONN (** Report whether socket listening is enabled *) | TCP_NODELAY (** Control the Nagle algorithm for TCP sockets *) | IPV6_ONLY (** Forbid binding an IPv6 socket to an IPv4 address *) | SO_REUSEPORT (** Allow reuse of address and port bindings *) (** The socket options that can be consulted with {!getsockopt} and modified with {!setsockopt}. These options have a boolean ([true]/[false]) value. *) type socket_int_option = Unix.socket_int_option = SO_SNDBUF (** Size of send buffer *) | SO_RCVBUF (** Size of received buffer *) | SO_ERROR [@ocaml.deprecated "Use Unix.getsockopt_error instead."] (** Deprecated. Use {!getsockopt_error} instead. *) | SO_TYPE (** Report the socket type *) | SO_RCVLOWAT (** Minimum number of bytes to process for input operations *) | SO_SNDLOWAT (** Minimum number of bytes to process for output operations *) (** The socket options that can be consulted with {!getsockopt_int} and modified with {!setsockopt_int}. These options have an integer value. *) type socket_optint_option = Unix.socket_optint_option = SO_LINGER (** Whether to linger on closed connections that have data present, and for how long (in seconds) *) (** The socket options that can be consulted with {!getsockopt_optint} and modified with {!setsockopt_optint}. These options have a value of type [int option], with [None] meaning ``disabled''. *) type socket_float_option = Unix.socket_float_option = SO_RCVTIMEO (** Timeout for input operations *) | SO_SNDTIMEO (** Timeout for output operations *) (** The socket options that can be consulted with {!getsockopt_float} and modified with {!setsockopt_float}. These options have a floating-point value representing a time in seconds. The value 0 means infinite timeout. *) val getsockopt : file_descr -> socket_bool_option -> bool (** Return the current status of a boolean-valued option in the given socket. *) val setsockopt : file_descr -> socket_bool_option -> bool -> unit (** Set or clear a boolean-valued option in the given socket. *) val getsockopt_int : file_descr -> socket_int_option -> int (** Same as {!getsockopt} for an integer-valued socket option. *) val setsockopt_int : file_descr -> socket_int_option -> int -> unit (** Same as {!setsockopt} for an integer-valued socket option. *) val getsockopt_optint : file_descr -> socket_optint_option -> int option (** Same as {!getsockopt} for a socket option whose value is an [int option]. *) val setsockopt_optint : file_descr -> socket_optint_option -> int option -> unit (** Same as {!setsockopt} for a socket option whose value is an [int option]. *) val getsockopt_float : file_descr -> socket_float_option -> float (** Same as {!getsockopt} for a socket option whose value is a floating-point number. *) val setsockopt_float : file_descr -> socket_float_option -> float -> unit (** Same as {!setsockopt} for a socket option whose value is a floating-point number. *) val getsockopt_error : file_descr -> error option (** Return the error condition associated with the given socket, and clear it. *) (** {1 High-level network connection functions} *) val open_connection : sockaddr -> in_channel * out_channel (** Connect to a server at the given address. Return a pair of buffered channels connected to the server. Remember to call {!Stdlib.flush} on the output channel at the right times to ensure correct synchronization. The two channels returned by [open_connection] share a descriptor to a socket. Therefore, when the connection is over, you should call {!Stdlib.close_out} on the output channel, which will also close the underlying socket. Do not call {!Stdlib.close_in} on the input channel; it will be collected by the GC eventually. *) val shutdown_connection : in_channel -> unit (** ``Shut down'' a connection established with {!open_connection}; that is, transmit an end-of-file condition to the server reading on the other side of the connection. This does not close the socket and the channels used by the connection. See {!Unix.open_connection} for how to close them once the connection is over. *) val establish_server : (in_channel -> out_channel -> unit) -> addr:sockaddr -> unit (** Establish a server on the given address. The function given as first argument is called for each connection with two buffered channels connected to the client. A new process is created for each connection. The function {!establish_server} never returns normally. The two channels given to the function share a descriptor to a socket. The function does not need to close the channels, since this occurs automatically when the function returns. If the function prefers explicit closing, it should close the output channel using {!Stdlib.close_out} and leave the input channel unclosed, for reasons explained in {!Unix.in_channel_of_descr}. @raise Invalid_argument on Windows. Use threads instead. *) (** {1 Host and protocol databases} *) type host_entry = Unix.host_entry = { h_name : string; h_aliases : string array; h_addrtype : socket_domain; h_addr_list : inet_addr array } (** Structure of entries in the [hosts] database. *) type protocol_entry = Unix.protocol_entry = { p_name : string; p_aliases : string array; p_proto : int } (** Structure of entries in the [protocols] database. *) type service_entry = Unix.service_entry = { s_name : string; s_aliases : string array; s_port : int; s_proto : string } (** Structure of entries in the [services] database. *) val gethostname : unit -> string (** Return the name of the local host. *) val gethostbyname : string -> host_entry (** Find an entry in [hosts] with the given name. @raise Not_found if no such entry exists. *) val gethostbyaddr : inet_addr -> host_entry (** Find an entry in [hosts] with the given address. @raise Not_found if no such entry exists. *) val getprotobyname : string -> protocol_entry (** Find an entry in [protocols] with the given name. @raise Not_found if no such entry exists. *) val getprotobynumber : int -> protocol_entry (** Find an entry in [protocols] with the given protocol number. @raise Not_found if no such entry exists. *) val getservbyname : string -> protocol:string -> service_entry (** Find an entry in [services] with the given name. @raise Not_found if no such entry exists. *) val getservbyport : int -> protocol:string -> service_entry (** Find an entry in [services] with the given service number. @raise Not_found if no such entry exists. *) type addr_info = Unix.addr_info = { ai_family : socket_domain; (** Socket domain *) ai_socktype : socket_type; (** Socket type *) ai_protocol : int; (** Socket protocol number *) ai_addr : sockaddr; (** Address *) ai_canonname : string (** Canonical host name *) } (** Address information returned by {!getaddrinfo}. *) type getaddrinfo_option = Unix.getaddrinfo_option = AI_FAMILY of socket_domain (** Impose the given socket domain *) | AI_SOCKTYPE of socket_type (** Impose the given socket type *) | AI_PROTOCOL of int (** Impose the given protocol *) | AI_NUMERICHOST (** Do not call name resolver, expect numeric IP address *) | AI_CANONNAME (** Fill the [ai_canonname] field of the result *) | AI_PASSIVE (** Set address to ``any'' address for use with {!bind} *) (** Options to {!getaddrinfo}. *) val getaddrinfo: string -> string -> getaddrinfo_option list -> addr_info list (** [getaddrinfo host service opts] returns a list of {!addr_info} records describing socket parameters and addresses suitable for communicating with the given host and service. The empty list is returned if the host or service names are unknown, or the constraints expressed in [opts] cannot be satisfied. [host] is either a host name or the string representation of an IP address. [host] can be given as the empty string; in this case, the ``any'' address or the ``loopback'' address are used, depending whether [opts] contains [AI_PASSIVE]. [service] is either a service name or the string representation of a port number. [service] can be given as the empty string; in this case, the port field of the returned addresses is set to 0. [opts] is a possibly empty list of options that allows the caller to force a particular socket domain (e.g. IPv6 only or IPv4 only) or a particular socket type (e.g. TCP only or UDP only). *) type name_info = Unix.name_info = { ni_hostname : string; (** Name or IP address of host *) ni_service : string; (** Name of service or port number *) } (** Host and service information returned by {!getnameinfo}. *) type getnameinfo_option = Unix.getnameinfo_option = NI_NOFQDN (** Do not qualify local host names *) | NI_NUMERICHOST (** Always return host as IP address *) | NI_NAMEREQD (** Fail if host name cannot be determined *) | NI_NUMERICSERV (** Always return service as port number *) | NI_DGRAM (** Consider the service as UDP-based instead of the default TCP *) (** Options to {!getnameinfo}. *) val getnameinfo : sockaddr -> getnameinfo_option list -> name_info (** [getnameinfo addr opts] returns the host name and service name corresponding to the socket address [addr]. [opts] is a possibly empty list of options that governs how these names are obtained. @raise Not_found if an error occurs. *) (** {1 Terminal interface} *) (** The following functions implement the POSIX standard terminal interface. They provide control over asynchronous communication ports and pseudo-terminals. Refer to the [termios] man page for a complete description. *) type terminal_io = Unix.terminal_io = { (* input modes *) mutable c_ignbrk : bool; (** Ignore the break condition. *) mutable c_brkint : bool; (** Signal interrupt on break condition. *) mutable c_ignpar : bool; (** Ignore characters with parity errors. *) mutable c_parmrk : bool; (** Mark parity errors. *) mutable c_inpck : bool; (** Enable parity check on input. *) mutable c_istrip : bool; (** Strip 8th bit on input characters. *) mutable c_inlcr : bool; (** Map NL to CR on input. *) mutable c_igncr : bool; (** Ignore CR on input. *) mutable c_icrnl : bool; (** Map CR to NL on input. *) mutable c_ixon : bool; (** Recognize XON/XOFF characters on input. *) mutable c_ixoff : bool; (** Emit XON/XOFF chars to control input flow. *) (* Output modes: *) mutable c_opost : bool; (** Enable output processing. *) (* Control modes: *) mutable c_obaud : int; (** Output baud rate (0 means close connection).*) mutable c_ibaud : int; (** Input baud rate. *) mutable c_csize : int; (** Number of bits per character (5-8). *) mutable c_cstopb : int; (** Number of stop bits (1-2). *) mutable c_cread : bool; (** Reception is enabled. *) mutable c_parenb : bool; (** Enable parity generation and detection. *) mutable c_parodd : bool; (** Specify odd parity instead of even. *) mutable c_hupcl : bool; (** Hang up on last close. *) mutable c_clocal : bool; (** Ignore modem status lines. *) (* Local modes: *) mutable c_isig : bool; (** Generate signal on INTR, QUIT, SUSP. *) mutable c_icanon : bool; (** Enable canonical processing (line buffering and editing) *) mutable c_noflsh : bool; (** Disable flush after INTR, QUIT, SUSP. *) mutable c_echo : bool; (** Echo input characters. *) mutable c_echoe : bool; (** Echo ERASE (to erase previous character). *) mutable c_echok : bool; (** Echo KILL (to erase the current line). *) mutable c_echonl : bool; (** Echo NL even if c_echo is not set. *) (* Control characters: *) mutable c_vintr : char; (** Interrupt character (usually ctrl-C). *) mutable c_vquit : char; (** Quit character (usually ctrl-\). *) mutable c_verase : char; (** Erase character (usually DEL or ctrl-H). *) mutable c_vkill : char; (** Kill line character (usually ctrl-U). *) mutable c_veof : char; (** End-of-file character (usually ctrl-D). *) mutable c_veol : char; (** Alternate end-of-line char. (usually none). *) mutable c_vmin : int; (** Minimum number of characters to read before the read request is satisfied. *) mutable c_vtime : int; (** Maximum read wait (in 0.1s units). *) mutable c_vstart : char; (** Start character (usually ctrl-Q). *) mutable c_vstop : char; (** Stop character (usually ctrl-S). *) } val tcgetattr : file_descr -> terminal_io (** Return the status of the terminal referred to by the given file descriptor. @raise Invalid_argument on Windows *) type setattr_when = Unix.setattr_when = TCSANOW | TCSADRAIN | TCSAFLUSH val tcsetattr : file_descr -> mode:setattr_when -> terminal_io -> unit (** Set the status of the terminal referred to by the given file descriptor. The second argument indicates when the status change takes place: immediately ([TCSANOW]), when all pending output has been transmitted ([TCSADRAIN]), or after flushing all input that has been received but not read ([TCSAFLUSH]). [TCSADRAIN] is recommended when changing the output parameters; [TCSAFLUSH], when changing the input parameters. @raise Invalid_argument on Windows *) val tcsendbreak : file_descr -> duration:int -> unit (** Send a break condition on the given file descriptor. The second argument is the duration of the break, in 0.1s units; 0 means standard duration (0.25s). @raise Invalid_argument on Windows *) val tcdrain : file_descr -> unit (** Waits until all output written on the given file descriptor has been transmitted. @raise Invalid_argument on Windows *) type flush_queue = Unix.flush_queue = TCIFLUSH | TCOFLUSH | TCIOFLUSH val tcflush : file_descr -> mode:flush_queue -> unit (** Discard data written on the given file descriptor but not yet transmitted, or data received but not yet read, depending on the second argument: [TCIFLUSH] flushes data received but not read, [TCOFLUSH] flushes data written but not transmitted, and [TCIOFLUSH] flushes both. @raise Invalid_argument on Windows *) type flow_action = Unix.flow_action = TCOOFF | TCOON | TCIOFF | TCION val tcflow : file_descr -> mode:flow_action -> unit (** Suspend or restart reception or transmission of data on the given file descriptor, depending on the second argument: [TCOOFF] suspends output, [TCOON] restarts output, [TCIOFF] transmits a STOP character to suspend input, and [TCION] transmits a START character to restart input. @raise Invalid_argument on Windows *) val setsid : unit -> int (** Put the calling process in a new session and detach it from its controlling terminal. @raise Invalid_argument on Windows *)