diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/telit-modem.txt | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/doc/telit-modem.txt b/doc/telit-modem.txt index 1627fb4c..d4d367d7 100644 --- a/doc/telit-modem.txt +++ b/doc/telit-modem.txt @@ -17,3 +17,30 @@ GPS: After setting the configuration, a power cycle is required. Port Configiuration #8 is available since firmware 12.00.004. Firmware version can be checked using 'AT+CGMR'. + +LE910 V2 +======== + +Default USB composition of LE910V2 uses PID 0x36 (AT#PORTCFG=0) +and consists of 6 serial ports (CDC-ACM standard, /dev/ttyACMx) +and 1 network adapter using CDC-NCM standard (wwanx or usbx). + +NCM interface configuration follows Telit documentation +(both documents available on Telit Download Zone - registration required) +"GE/HE/UE910, UL865, LE910 V2 Linux USB Driver - User Guide r0" +(document 1VV0301255 Rev.0 - 2016-01-22) +and "Telit LE910-V2 NCM SETUP r3" +(document 1VV0301246 Rev.3 - 2016-11-29). + +After context is setup, NCM mode activated and PDP context activated +connection configuration can be read using +AT+CGPADDR=context_id and AT+CGCONTRDP=context_id commands. +This is done automatically and results available via +org.ofono.ConnectionContext.GetProperties DBus method. + +Then Linux network interface needs to be configured: + ifconfig <Interface> <Address> netmask <Netmask> up + route add default gw <Gateway> + arp -s <Gateway> 11:22:33:44:55:66 + +Only after these steps network interface is usable. |