diff options
Diffstat (limited to 'etc')
-rw-r--r-- | etc/iface.example | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/etc/iface.example b/etc/iface.example index 3c7354f..7af784b 100644 --- a/etc/iface.example +++ b/etc/iface.example @@ -60,3 +60,138 @@ # the same subnet. # iface.net_ifacename = eth0 # iface.ipaddress = 102.50.50.101 + +# OPTIONAL: iface.bootproto +# +# Valid values are: +# "dhcp" and "static" +# +# REQUIRED when IPv4 address need to be obtained dynamically using DHCP +# example: +# iface.bootproto = dhcp +# +# OPTIONAL when the IPv4 address is set statically +# example: +# iface.ipaddress = 102.50.50.101 +# iface.bootproto = static +# + +# OPTIONAL: iface.vlan_id +# Used to set the VLAN ID for the iSCSI interfae. +# example +# iface.vlan_id = 1022 + +# OPTIONAL: iface.vlan_priority +# Used to set the VLAN priority for the iSCSI interfae. +# example +# iface.vlan_priority = 1 + +# OPTIONAL: iface.vlan_state +# Used to enable or disable the VLAN on the iSCSI interface +# example +# iface.vlan_state = enable + +# OPTIONAL: iface.ipv6_linklocal +# Specify the IPV6 Link Local Address with the +# link local prefix of FE80::0/64 +# example: +# iface.ipv6_linklocal = fe80:0000:0000:0000:020e:1eff:1111:2221 + +# OPTIONAL: iface.ipv6_router +# Used to set a default IPV6 router +# example: +# iface.ipv6_router = fe80:0000:0000:0000:7ae7:d1ff:fe72:4048 + +# OPTIONAL: iface.ipv6_autocfg +# Used to set the discovery protocol to obtain IPV6 address +# For example qla4xxx support neighbor discovery +# example: +# iface.ipv6_autocfg = nd + +# OPTIONAL: iface.linklocal_autocfg +# For transport like qla4xxx this allows to auto configure the +# IPV6 link local address based on the MAC address of the iSCSI +# interface + +# OPTIONAL: iface.router_autocfg +# Required to set the IPv6 router discovery protocol +# To set the router discovery protocol to Neighbor Discovery specify "nd" +# example: +# iface.router_autocfg = nd + +# OPTIONAL: iface.state +# By default the iface is enabled +# iface.state = enable +# To disable the iface set the state to "disable" +# iface.state = disable + +# iface.iface_num +# REQUIRED: When there are more than 1 interface to be configured. +# For transports like qla4xxx, one can specify two IPV6 interfaces +# in such case the iface_num must be set correctly +# example: +# iface settings for first IPV6 interface +# iface.iscsi_ifacename = iface-qla4xxx-ipv6-1 +# iface.iface_num = 0 +# +# iface settings for second IPV6 interface +# iface.iscsi_ifacename = iface-qla4xxx-ipv6-2 +# iface.iface_num = 1 + +# Here are some example iface files +# IPV4 sample config file with static IP address: +# BEGIN RECORD 2.0-872 +# iface.iscsi_ifacename = qla4xxx-3 +# iface.ipaddress = 192.168.1.75 +# iface.hwaddress = 00:0e:1e:04:93:92 +# iface.transport_name = qla4xxx +# iface.bootproto = static +# iface.subnet_mask = 255.255.255.0 +# iface.gateway = 192.168.1.1 +# iface.state = enable +# iface.vlan = <empty> +# iface.iface_num = 0 +# END RECORD +# +# IPV6 sample config file with neighbor discovery: +# BEGIN RECORD 2.0-872 +# iface.iscsi_ifacename = qla4xxx-3-1 +# iface.ipaddress = +# iface.hwaddress = 00:0e:1e:04:93:92 +# iface.transport_name = qla4xxx +# iface.ipv6_autocfg = nd +# iface.linklocal_autocfg = auto +# iface.router_autocfg = nd +# iface.ipv6_linklocal = fe80:0000:0000:0000:020e:1eff:1111:2221 +# iface.ipv6_router = auto +# iface.state = enable +# iface.vlan = <empty> +# iface.iface_num = 0 +# END RECORD + +# Ipv4 sample config file (DHCP configuration): +# BEGIN RECORD 2.0-872 +# iface.iscsi_ifacename = qla4xxx-3 +# iface.hwaddress = 00:0e:1e:04:93:92 +# iface.transport_name = qla4xxx +# iface.bootproto = dhcp +# iface.state = enable +# iface.vlan = <empty> +# iface.iface_num = 0 +# END RECORD + +# Sample ipv6 config file(manual configured IPs): +# BEGIN RECORD 2.0-872 +# iface.iscsi_ifacename = iface-new-file +# iface.ipaddress = fec0:ce00:7014:0041:1111:2222:1e04:9392 +# iface.hwaddress = 00:0e:1e:04:93:92 +# iface.transport_name = qla4xxx +# iface.ipv6_autocfg = <empty> +# iface.linklocal_autocfg = <empty> +# iface.router_autocfg = <empty> +# iface.ipv6_linklocal = fe80:0000:0000:0000:0000:0000:1e04:9392 +# iface.ipv6_router = fe80:0000:0000:0000:7ae7:d1ff:fe72:4048 +# iface.state = enable +# iface.vlan = <empty> +# iface.iface_num = 0 +# END RECORD |