diff options
Diffstat (limited to 'utils/iscsi_offload.sh')
-rwxr-xr-x | utils/iscsi_offload.sh | 384 |
1 files changed, 384 insertions, 0 deletions
diff --git a/utils/iscsi_offload.sh b/utils/iscsi_offload.sh new file mode 100755 index 0000000..1869fe1 --- /dev/null +++ b/utils/iscsi_offload.sh @@ -0,0 +1,384 @@ +#!/bin/bash +# +# iscsi_offload +# +# Configure iSCSI offload engines for use with open-iscsi +# Usage: +# iscsi_offload [-d | -f | -i <ipaddr> | -t ] <nic> +# +# Copyright (c) 2011 Hannes Reinecke, SUSE Labs +# This script is licensed under the GPL. +# +# The script creates an open-iscsi interface definition +# in the style <nic>-<module>, where <nic> matches the +# network interface passed on the commandline. +# If '-t' (test mode) is passed as an option, the script +# will not create nor modify any setting but just print +# the currently active ones. +# +# Currently the script works with Broadcom (bnx2i) and +# Chelsio T3 (cxgbi) iSCSI offload engines. +# Should work with Chelsio T4, but has not been tested. +# ServerEngines (be2iscsi) and QLogic (qla4xxx) can only +# be configured via BIOS, open-iscsi support is still in +# development. +# + +# +# Return codes: +# 0: Success +# 1: Invalid command line parameter +# 2: iSCSI offloading not supported +# 3: Error during module loading +# 4: Cannot configure interface via iscsiadm, use BIOS setup +# 5: internal error running iscsiadm +# +# Output: +# <mac> [none|dhcp|ip <ipaddr>|ibft] +# where +# <mac>: MAC Address of the iSCSI offload engine +# none: No IP configuration set for the iSCSI offload engine +# dhcp: iSCSI offload engine configured for DHCP +# ip: iSCSI offload engine configured with static IP address <ipaddr> +# ibft: iSCSI offload engine configured from iBFT values +# + +# +# Figure out the MAC address of the iSCSI offload engine +# corresponding to a NIC from a given PCI device. +# bnx2 is using one PCI device per port for both network and iSCSI offloading +# cxgb3 is using one PCI device for everything. +# +iscsi_macaddress_from_pcidevice() +{ + local path=$1 + local if=$2 + local h + local host + + for h in $path/host* ; do + if [ -d "$h" ] ; then + host=${h##*/} + read netdev < /sys/class/iscsi_host/$host/netdev + if [ "$netdev" = "$IFNAME" ] ; then + read mac < /sys/class/iscsi_host/$host/hwaddress + if [ "$mac" != "00:00:00:00:00:00" ] ; then + echo "$mac" + fi + break; + fi + fi + done +} + +# +# Figure out the MAC address of the iSCSI offload engine +# corresponding to a NIC from a given PCI function. +# It is assumed that the MAC address of the iSCSI offload +# engine is equal of the MAC address of the NIC plus one. +# Suitable for be2iscsi and qla4xxx +# +iscsi_macaddress_from_pcifn() +{ + local path=$1 + local if=$2 + local h + local host + local ifmac + local olemacoffset=$3 + + ifmac=$(ip addr show dev $if | sed -n 's/ *link\/ether \(.*\) brd.*/\1/p') + m5=$(( 0x${ifmac##*:} )) + m5=$(( $m5 + $olemacoffset )) + ifmac=$(printf "%s:%02x" ${ifmac%:*} $m5) + for host in /sys/class/iscsi_host/host* ; do + if [ -L "$host" ] ; then + read mac < $host/hwaddress + if [ "$mac" = "$ifmac" ] ; then + echo "$mac" + break; + fi + fi + done +} + +update_iface_setting() { + local iface="$1" + local name="$2" + local value="$3" + + iface_value=$(iscsiadm -m iface -I $iface | sed -n "s/$name = \(.*\)/\1/p") + if [ "$iface_value" = "<empty>" ] ; then + iface_value= + fi + if [ "$iface_value" != "$value" ] ; then + if ! iscsiadm -m iface -I $iface -o update -n "$name" -v "$value" ; then + return 1 + fi + fi + return 0 +} + +while getopts di:t options ; do + case $options in + d ) mode=dhcp;; + i ) mode=static + optaddr=$OPTARG + ;; + f ) mode=firmware;; + t ) dry_run=1;; + ?) printf "Usage: %s [-d|-t|-i ipaddr|-f] ifname\n" $0 + exit 1;; + esac +done +shift $(($OPTIND - 1)) + +IFNAME=$1 +ibft_mode="none" + +if [ -z "$IFNAME" ] ; then + echo "No interface specified" + exit 1 +fi + +if [ "$dry_run" ] ; then + if [ "$mode" = "dhcp" ] ; then + echo "'-t' specified, ignoring '-d'" + mode= + elif [ "$mode" = "static" ] ; then + echo "'-t' specified, ignoring '-s'" + mode= + fi +fi + +if [ ! -L /sys/class/net/$IFNAME ] ; then + echo "Interface $IFNAME not found" + exit 1 +fi + +if [ "$optaddr" ] && ! ip route get $optaddr ; then + echo "Invalid IP address $optaddr" + exit 1 +fi +if [ "$dry_run" ] ; then + mode= +fi + + +ifpath=$(cd -P /sys/class/net/$IFNAME; echo $PWD) +pcipath=$(cd -P $ifpath/device; echo $PWD) + +if [ -d $pcipath ] ; then + drvlink=$(readlink $pcipath/driver) + driver=${drvlink##*/} +fi + +if [ -z "$driver" ] ; then + echo "No driver found for interface $IFNAME" + exit 1 +fi + +case "$driver" in + bnx2*) + mod=bnx2i + ;; + cxgb*) + mod=cxgb3i + ;; + be2*) + mod=be2iscsi + ;; + qla*) + mod=qla4xxx + ;; + qed*) + mod=qedi + ;; +esac + +if [ -z "$mod" ] ; then + echo "iSCSI offloading not supported on interface $IFNAME" + exit 2 +fi + +# Check if the required modules are already loaded +loaded=$(sed -n "/^$mod/p" /proc/modules) +if [ -z "$loaded" ] ; then + modprobe $mod +fi + +loaded=$(sed -n "/^$mod/p" /proc/modules) +if [ -z "$loaded" ] ; then + echo "Loading of $mod.ko failed, please check dmesg" + exit 3 +fi + +# Get the correct MAC address for the various devices +if [ "$mod" = "bnx2i" ] ; then + mac=$(iscsi_macaddress_from_pcidevice $pcipath $IFNAME) +elif [ "$mod" = "cxgb3i" ] ; then + mac=$(iscsi_macaddress_from_pcidevice $pcipath $IFNAME) +elif [ "$mod" = "be2iscsi" ] ; then + mac=$(iscsi_macaddress_from_pcifn $pcipath $IFNAME 1) +elif [ "$mod" = "qla4xxx" ] ; then + mac=$(iscsi_macaddress_from_pcifn $pcipath $IFNAME 1) +elif [ "$mod" = "qede" -o "$mod" = "qedi" ] ; then + mac=$(iscsi_macaddress_from_pcifn $pcipath $IFNAME 4) +fi + +if [ -z "$mac" ] ; then + echo "iSCSI offloading not supported on interface $IFNAME" + exit 2 +fi + +gen_iface="$mod.$mac" +ioe_iface="${IFNAME}-${mod}" + +# Get existing settings +if iscsiadm -m iface -I $ioe_iface > /dev/null 2>&1 ; then + ioe_mac=$(iscsiadm -m iface -I $ioe_iface 2> /dev/null| sed -n "s/iface\.hwaddress = \(.*\)/\1/p") + ioe_mod=$(iscsiadm -m iface -I $ioe_iface 2> /dev/null| sed -n "s/iface\.transport_name = \(.*\)/\1/p") + ipaddr=$(iscsiadm -m iface -I $ioe_iface 2> /dev/null| sed -n "s/iface\.ipaddress = \(.*\)/\1/p") + if [ "$ipaddr" == "<empty>" ] ; then + ipaddr= + fi +elif [ "$mod" = "be2iscsi" ] ; then + ioe_mac=$mac + ioe_mod=$mod +else + # Create new interface + iscsiadm -m iface -I $ioe_iface --op=new 2> /dev/null + ioe_mac= + ioe_mod= + ipaddr= +fi + +if [ -z "$dry_run" ] ; then + if [ "$ioe_mac" != "$mac" ] ; then + if [ -n "$ioe_mac" ] ; then + echo "Warning: Updating MAC address on iface $ioe_iface" + fi + update_iface_setting $ioe_iface iface.hwaddress "$mac" + fi + + if [ "$ioe_mod" != "$mod" ] ; then + if [ -n "$ioe_mod" ] ; then + echo "Warning: Update transport on iface $ioe_iface" + fi + update_iface_setting $ioe_iface iface.transport_name "$mod" + fi +elif [ -z "$ipaddr" ] ; then + ipaddr=$(iscsiadm -m iface -I $gen_iface 2> /dev/null| sed -n "s/iface\.ipaddress = \(.*\)/\1/p") + if [ "$ipaddr" = "<empty>" ] ; then + ipaddr= + fi +elif [ "$ioe_mod" != "$mod" ] ; then + echo "Warning: Transport mismatch on iface $ioe_iface: $ioe_mod should be $mod" +fi + +# Check iBFT setting +for d in /sys/firmware/* ; do + [ -d $d ] || continue + [ -d $d/ethernet0 ] || continue + iboot_dir=$d +done +if [ -n "$iboot_dir" ] && [ -d "$iboot_dir" ] ; then + for if in ${iboot_dir}/ethernet* ; do + read ibft_mac < $if/mac + [ "$ibft_mac" = "$mac" ] || continue + ibft_origin=0 + [ -f ${if}/origin ] && read ibft_origin < $if/origin + if [ "$ibft_origin" -eq 1 ] ; then + ibft_mode="static" + elif [ "$ibft_origin" -eq 3 ] ; then + ibft_mode="dhcp" + fi + [ -f $if/dhcp ] && read ibft_dhcp < $if/dhcp + if [ -n "$ibft_dhcp" -a "$ibft_mode" != "dhcp" ] ; then + ibft_mode=dhcp + fi + if [ "$ibft_mode" = "dhcp" ] ; then + ibft_ipaddr="0.0.0.0" + ibft_gateway= + ibft_mask= + break + fi + [ -f $if/ip-addr ] && read ibft_ipaddr < $if/ip-addr + [ -f $if/gateway ] && read ibft_gateway < $if/gateway + [ -f $if/subnet-mask ] && read ibft_mask < $if/subnet-mask + break + done +fi + +if [ -z "$optaddr" ] && [ "$ibft_ipaddr" ] ; then + optaddr=$ibft_ipaddr +fi + +# Check if the interface needs to be configured +if [ -z "$mode" ] ; then + if [ "$ibft_mode" != "none" ] ; then + echo "$mac ibft" + mode="ibft" + elif [ -z "$ipaddr" ] ; then + echo "$mac none" + mode="none" + elif [ "$ipaddr" = "0.0.0.0" ] ; then + echo "$mac dhcp" + ipaddr= + mode="dhcp" + else + echo "$mac ip $ipaddr" + mode="static" + fi + [ "$dry_run" ] && exit 0 +elif [ "$mode" = "dhcp" ] ; then + if [ "$ipaddr" = "0.0.0.0" ] ; then + echo "$mac dhcp" + exit 0 + fi + optaddr="0.0.0.0" +elif [ "$mode" = "static" ] && [ "$ipaddr" = "$optaddr" ] ; then + echo "$mac ip $ipaddr" + exit 0 +fi + +if [ "$mod" = "be2iscsi" ] ; then + exit 4 +fi + +if ! update_iface_setting $ioe_iface iface.ipaddress "$optaddr" ; then + echo "Failed to set IP address: $?" + exit 1 +fi +if ! update_iface_setting $gen_iface iface.ipaddress "$optaddr" ; then + echo "Failed to set IP address for generic interface: $?" + exit 1 +fi + +if ! update_iface_setting $ioe_iface iface.gateway "$ibft_gateway" ; then + echo "Failed to set gateway address: $?" + exit 1 +fi + +if ! update_iface_setting $gen_iface iface.gateway "$ibft_gateway" ; then + echo "Failed to set gateway address for generic interface: $?" + exit 1 +fi + +if ! update_iface_setting $ioe_iface iface.subnet_mask "$ibft_mask" ; then + echo "Failed to set subnet mask: $?" + exit 1 +fi + +if ! update_iface_setting $gen_iface iface.subnet_mask "$ibft_mask" ; then + echo "Failed to set subnet mask for generic interface: $?" + exit 1 +fi + +if [ "$mod" = "qla4xxx" ] ; then + iscsiadm -m iface -H $mac -o applyall +fi +ip link set dev $IFNAME up + +exit 0 + |