summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile.in32
-rw-r--r--openscp.1110
-rw-r--r--openssh-add.1116
-rw-r--r--openssh-agent.1124
-rw-r--r--openssh-keygen.1155
-rw-r--r--openssh.1966
-rw-r--r--openssh.spec94
-rw-r--r--opensshd.8781
-rwxr-xr-xopensshd.init22
-rw-r--r--ssh.h4
-rw-r--r--sshd.c4
-rw-r--r--sshd_config4
12 files changed, 71 insertions, 2341 deletions
diff --git a/Makefile.in b/Makefile.in
index 2601404c..16bb16da 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -7,9 +7,9 @@ libdir=@libdir@
CC=@CC@
OPT_FLAGS=-g
CFLAGS=$(OPT_FLAGS) -Wall -DETCDIR=\"@sysconfdir@\" @DEFS@
-TARGETS=bin/libopenssh.a bin/openssh bin/opensshd bin/openssh-add bin/openssh-keygen bin/openssh-agent bin/openscp
+TARGETS=bin/libssh.a bin/ssh bin/sshd bin/ssh-add bin/ssh-keygen bin/ssh-agent bin/scp
LFLAGS=-L./bin
-LIBS=-lopenssh @LIBS@
+LIBS=-lssh @LIBS@
AR=@AR@
RANLIB=@RANLIB@
@@ -23,32 +23,32 @@ OBJS= authfd.o authfile.o auth-passwd.o auth-rhosts.o auth-rh-rsa.o \
all: $(OBJS) $(TARGETS)
-bin/libopenssh.a: authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o compat.o compress.o crc32.o deattack.o hostfile.o match.o mpaux.o nchan.o packet.o readpass.o rsa.o tildexpand.o ttymodes.o uidswap.o xmalloc.o helper.o rc4.o mktemp.o strlcpy.o
+bin/libssh.a: authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o compat.o compress.o crc32.o deattack.o hostfile.o match.o mpaux.o nchan.o packet.o readpass.o rsa.o tildexpand.o ttymodes.o uidswap.o xmalloc.o helper.o rc4.o mktemp.o strlcpy.o
[ -d bin ] || mkdir bin
$(AR) rv $@ $^
$(RANLIB) $@
-bin/openssh: ssh.o sshconnect.o log-client.o readconf.o clientloop.o
+bin/ssh: ssh.o sshconnect.o log-client.o readconf.o clientloop.o
[ -d bin ] || mkdir bin
$(CC) -o $@ $^ $(LFLAGS) $(LIBS)
-bin/opensshd: sshd.o auth-rhosts.o auth-passwd.o auth-rsa.o auth-rh-rsa.o pty.o log-server.o login.o servconf.o serverloop.o
+bin/sshd: sshd.o auth-rhosts.o auth-passwd.o auth-rsa.o auth-rh-rsa.o pty.o log-server.o login.o servconf.o serverloop.o
[ -d bin ] || mkdir bin
$(CC) -o $@ $^ $(LFLAGS) $(LIBS)
-bin/openscp: scp.o
+bin/scp: scp.o
[ -d bin ] || mkdir bin
$(CC) -o $@ $^ $(LFLAGS) $(LIBS)
-bin/openssh-add: ssh-add.o log-client.o
+bin/ssh-add: ssh-add.o log-client.o
[ -d bin ] || mkdir bin
$(CC) -o $@ $^ $(LFLAGS) $(LIBS)
-bin/openssh-agent: ssh-agent.o log-client.o
+bin/ssh-agent: ssh-agent.o log-client.o
[ -d bin ] || mkdir bin
$(CC) -o $@ $^ $(LFLAGS) $(LIBS)
-bin/openssh-keygen: ssh-keygen.o log-client.o
+bin/ssh-keygen: ssh-keygen.o log-client.o
[ -d bin ] || mkdir bin
$(CC) -o $@ $^ $(LFLAGS) $(LIBS)
@@ -59,13 +59,13 @@ install:
install -d $(bindir)
install -d $(sbindir)
install -d $(libdir)
- install -c bin/openssh $(bindir)/openssh
- install -c bin/openscp $(bindir)/openscp
- install -c bin/openssh-add $(bindir)/openssh-add
- install -c bin/openssh-agent $(bindir)/openssh-agent
- install -c bin/openssh-keygen $(bindir)/openssh-keygen
- install -c bin/opensshd $(sbindir)/opensshd
- install -c bin/libopenssh.a $(libdir)/libopenssh.a
+ install -c bin/ssh $(bindir)/ssh
+ install -c bin/scp $(bindir)/scp
+ install -c bin/ssh-add $(bindir)/ssh-add
+ install -c bin/ssh-agent $(bindir)/ssh-agent
+ install -c bin/ssh-keygen $(bindir)/ssh-keygen
+ install -c bin/sshd $(sbindir)/sshd
+ install -c bin/libssh.a $(libdir)/libssh.a
distclean: clean
rm -f Makefile config.h *~
diff --git a/openscp.1 b/openscp.1
deleted file mode 100644
index 6601ac65..00000000
--- a/openscp.1
+++ /dev/null
@@ -1,110 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" scp.1
-.\"
-.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
-.\"
-.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-.\" All rights reserved
-.\"
-.\" Created: Sun May 7 00:14:37 1995 ylo
-.\"
-.\" $Id: openscp.1,v 1.1 1999/10/28 04:03:14 damien Exp $
-.\"
-.Dd September 25, 1999
-.Dt SCP 1
-.Os
-.Sh NAME
-.Nm scp
-.Nd secure copy (remote file copy program)
-.Sh SYNOPSIS
-.Nm scp
-.Op Fl pqrvC
-.Op Fl P Ar port
-.Op Fl c Ar cipher
-.Op Fl i Ar identity_file
-.Sm off
-.Oo
-.Op Ar user@
-.Ar host1 No :
-.Oc Ns Ar file1
-.Sm on
-.Op Ar ...
-.Sm off
-.Oo
-.Op Ar user@
-.Ar host2 No :
-.Oc Ar file2
-.Sm on
-.Sh DESCRIPTION
-.Nm
-copies files between hosts on a network. It uses
-.Xr ssh 1
-for data transfer, and uses the same authentication and provides the
-same security as
-.Xr ssh 1 .
-Unlike
-.Xr rcp 1 ,
-.Nm
-will ask for passwords or passphrases if they are needed for
-authentication.
-.Pp
-Any file name may contain a host and user specification to indicate
-that the file is to be copied to/from that host. Copies between two
-remote hosts are permitted.
-.Pp
-The options are as follows:
-.Bl -tag -width Ds
-.It Fl c Ar cipher
-Selects the cipher to use for encrypting the data transfer. This
-option is directly passed to
-.Xr ssh 1 .
-.It Fl i Ar identity_file
-Selects the file from which the identity (private key) for RSA
-authentication is read. This option is directly passed to
-.Xr ssh 1 .
-.It Fl p
-Preserves modification times, access times, and modes from the
-original file.
-.It Fl r
-Recursively copy entire directories.
-.It Fl v
-Verbose mode. Causes
-.Nm
-and
-.Xr ssh 1
-to print debugging messages about their progress. This is helpful in
-debugging connection, authentication, and configuration problems.
-.It Fl B
-Selects batch mode (prevents asking for passwords or passphrases).
-.It Fl q
-Disables the progress meter.
-.It Fl C
-Compression enable. Passes the
-.Fl C
-flag to
-.Xr ssh 1
-to enable compression.
-.It Fl P Ar port
-Specifies the port to connect to on the remote host. Note that this
-option is written with a capital
-.Sq P ,
-because
-.Fl p
-is already reserved for preserving the times and modes of the file in
-.Xr rcp 1 .
-.Sh AUTHORS
-Timo Rinne <tri@iki.fi> and Tatu Ylonen <ylo@cs.hut.fi>
-.Sh HISTORY
-.Nm
-is based on the
-.Xr rcp 1
-program in BSD source code from the Regents of the University of
-California.
-.Sh SEE ALSO
-.Xr rcp 1 ,
-.Xr ssh 1 ,
-.Xr ssh-add 1 ,
-.Xr ssh-agent 1 ,
-.Xr ssh-keygen 1 ,
-.Xr sshd 8
diff --git a/openssh-add.1 b/openssh-add.1
deleted file mode 100644
index fd0861fe..00000000
--- a/openssh-add.1
+++ /dev/null
@@ -1,116 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" ssh-add.1
-.\"
-.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
-.\"
-.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-.\" All rights reserved
-.\"
-.\" Created: Sat Apr 22 23:55:14 1995 ylo
-.\"
-.\" $Id: openssh-add.1,v 1.1 1999/10/28 04:03:14 damien Exp $
-.\"
-.Dd September 25, 1999
-.Dt SSH-ADD 1
-.Os
-.Sh NAME
-.Nm ssh-add
-.Nd adds identities for the authentication agent
-.Sh SYNOPSIS
-.Nm ssh-add
-.Op Fl ldD
-.Op Ar
-.Sh DESCRIPTION
-.Nm
-adds identities to the authentication agent,
-.Xr ssh-agent 1 .
-When run without arguments, it adds the file
-.Pa $HOME/.ssh/identity .
-Alternative file names can be given on the
-command line. If any file requires a passphrase,
-.Nm
-asks for the passphrase from the user.
-The Passphrase it is read from the user's tty.
-.Pp
-The authentication agent must be running and must be an ancestor of
-the current process for
-.Nm
-to work.
-.Pp
-The options are as follows:
-.Bl -tag -width Ds
-.It Fl l
-Lists all identities currently represented by the agent.
-.It Fl d
-Instead of adding the identity, removes the identity from the agent.
-.It Fl D
-Deletes all identities from the agent.
-.El
-.Sh FILES
-.Bl -tag -width Ds
-.Pa $HOME/.ssh/identity
-Contains the RSA authentication identity of the user. This file
-should not be readable by anyone but the user.
-Note that
-.Nm
-ignores this file if it is accessible by others.
-It is possible to
-specify a passphrase when generating the key; that passphrase will be
-used to encrypt the private part of this file. This is the
-default file added by
-.Nm
-when no other files have been specified.
-.Pp
-If
-.Nm
-needs a passphrase, it will read the passphrase from the current
-terminal if it was run from a terminal. If
-.Nm
-does not have a terminal associated with it but
-.Ev DISPLAY
-is set, it
-will open an X11 window to read the passphrase. This is particularly
-useful when calling
-.Nm
-from a
-.Pa .Xsession
-or related script. (Note that on some machines it
-may be necessary to redirect the input from
-.Pa /dev/null
-to make this work.)
-.Sh AUTHOR
-Tatu Ylonen <ylo@cs.hut.fi>
-.Pp
-OpenSSH
-is a derivative of the original (free) ssh 1.2.12 release, but with bugs
-removed and newer features re-added. Rapidly after the 1.2.12 release,
-newer versions bore successively more restrictive licenses. This version
-of OpenSSH
-.Bl -bullet
-.It
-has all components of a restrictive nature (ie. patents, see
-.Xr ssl 8 )
-directly removed from the source code; any licensed or patented components
-are chosen from
-external libraries.
-.It
-has been updated to support ssh protocol 1.5.
-.It
-contains added support for
-.Xr kerberos 8
-authentication and ticket passing.
-.It
-supports one-time password authentication with
-.Xr skey 1 .
-.El
-.Pp
-The libraries described in
-.Xr ssl 8
-are required for proper operation.
-.Sh SEE ALSO
-.Xr ssh 1 ,
-.Xr ssh-agent 1 ,
-.Xr ssh-keygen 1 ,
-.Xr sshd 8 ,
-.Xr ssl 8
diff --git a/openssh-agent.1 b/openssh-agent.1
deleted file mode 100644
index df061df8..00000000
--- a/openssh-agent.1
+++ /dev/null
@@ -1,124 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" ssh-agent.1
-.\"
-.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
-.\"
-.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-.\" All rights reserved
-.\"
-.\" Created: Sat Apr 23 20:10:43 1995 ylo
-.\"
-.\" $Id: openssh-agent.1,v 1.1 1999/10/28 04:03:14 damien Exp $
-.\"
-.Dd September 25, 1999
-.Dt SSH-AGENT 1
-.Os
-.Sh NAME
-.Nm ssh-agent
-.Nd authentication agent
-.Sh SYNOPSIS
-.Nm ssh-agent
-.Ar command
-.Sh DESCRIPTION
-.Nm
-is a program to hold authentication private keys. The
-idea is that
-.Nm
-is started in the beginning of an X-session or a login session, and
-all other windows or programs are started as children of the ssh-agent
-program (the
-.Ar command
-normally starts X or is the user shell). Programs started under
-the agent inherit a connection to the agent, and the agent is
-automatically used for RSA authentication when logging to other
-machines using
-.Xr ssh 1 .
-.Pp
-The agent initially does not have any private keys. Keys are added
-using
-.Xr ssh-add 1 .
-When executed without arguments,
-.Xr ssh-add 1
-adds the
-.Pa $HOME/.ssh/identity
-file. If the identity has a passphrase,
-.Xr ssh-add 1
-asks for the passphrase (using a small X11 application if running
-under X11, or from the terminal if running without X). It then sends
-the identity to the agent. Several identities can be stored in the
-agent; the agent can automatically use any of these identities.
-.Ic ssh-add -l
-displays the identities currently held by the agent.
-.Pp
-The idea is that the agent is run in the user's local PC, laptop, or
-terminal. Authentication data need not be stored on any other
-machine, and authentication passphrases never go over the network.
-However, the connection to the agent is forwarded over SSH
-remote logins, and the user can thus use the privileges given by the
-identities anywhere in the network in a secure way.
-.Pp
-A connection to the agent is inherited by child programs:
-A unix-domain socket is created
-.Pq Pa /tmp/ssh-XXXX/agent.<pid> ,
-and the name of this socket is stored in the
-.Ev SSH_AUTH_SOCK
-environment
-variable. The socket is made accessible only to the current user.
-This method is easily abused by root or another instance of the same
-user.
-.Pp
-The agent exits automatically when the command given on the command
-line terminates.
-.Sh FILES
-.Bl -tag -width Ds
-.It Pa $HOME/.ssh/identity
-Contains the RSA authentication identity of the user. This file
-should not be readable by anyone but the user. It is possible to
-specify a passphrase when generating the key; that passphrase will be
-used to encrypt the private part of this file. This file
-is not used by
-.Nm
-but is normally added to the agent using
-.Xr ssh-add 1
-at login time.
-.It Pa /tmp/ssh-XXXX/agent.<pid> ,
-Unix-domain sockets used to contain the connection to the
-authentication agent. These sockets should only be readable by the
-owner. The sockets should get automatically removed when the agent
-exits.
-.Sh AUTHOR
-Tatu Ylonen <ylo@cs.hut.fi>
-.Pp
-OpenSSH
-is a derivative of the original (free) ssh 1.2.12 release, but with bugs
-removed and newer features re-added. Rapidly after the 1.2.12 release,
-newer versions bore successively more restrictive licenses. This version
-of OpenSSH
-.Bl -bullet
-.It
-has all components of a restrictive nature (ie. patents, see
-.Xr ssl 8 )
-directly removed from the source code; any licensed or patented components
-are chosen from
-external libraries.
-.It
-has been updated to support ssh protocol 1.5.
-.It
-contains added support for
-.Xr kerberos 8
-authentication and ticket passing.
-.It
-supports one-time password authentication with
-.Xr skey 1 .
-.El
-.Pp
-The libraries described in
-.Xr ssl 8
-are required for proper operation.
-.Sh SEE ALSO
-.Xr ssh 1 ,
-.Xr ssh-add 1 ,
-.Xr ssh-keygen 1 ,
-.Xr sshd 8 ,
-.Xr ssl 8
diff --git a/openssh-keygen.1 b/openssh-keygen.1
deleted file mode 100644
index c135be44..00000000
--- a/openssh-keygen.1
+++ /dev/null
@@ -1,155 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" ssh-keygen.1
-.\"
-.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
-.\"
-.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-.\" All rights reserved
-.\"
-.\" Created: Sat Apr 22 23:55:14 1995 ylo
-.\"
-.\" $Id: openssh-keygen.1,v 1.1 1999/10/28 04:03:14 damien Exp $
-.\"
-.Dd September 25, 1999
-.Dt SSH-KEYGEN 1
-.Os
-.Sh NAME
-.Nm ssh-keygen
-.Nd authentication key generation
-.Sh SYNOPSIS
-.Nm ssh-keygen
-.Op Fl q
-.Op Fl b Ar bits
-.Op Fl N Ar new_passphrase
-.Op Fl C Ar comment
-.Nm ssh-keygen
-.Fl p
-.Op Fl P Ar old_passphrase
-.Op Fl N Ar new_passphrase
-.Nm ssh-keygen
-.Fl c
-.Op Fl P Ar passphrase
-.Op Fl C Ar comment
-.Sh DESCRIPTION
-.Nm
-generates and manages authentication keys for
-.Xr ssh 1 .
-Normally each user wishing to use SSH
-with RSA authentication runs this once to create the authentication
-key in
-.Pa $HOME/.ssh/identity .
-Additionally, the system administrator may use this to generate host keys.
-.Pp
-Normally this program generates the key and asks for a file in which
-to store the private key. The public key is stored in a file with the
-same name but
-.Dq .pub
-appended. The program also asks for a
-passphrase. The passphrase may be empty to indicate no passphrase
-(host keys must have empty passphrase), or it may be a string of
-arbitrary length. Good passphrases are 10-30 characters long and are
-not simple sentences or otherwise easily guessable (English
-prose has only 1-2 bits of entropy per word, and provides very bad
-passphrases). The passphrase can be changed later by using the
-.Fl p
-option.
-.Pp
-There is no way to recover a lost passphrase. If the passphrase is
-lost or forgotten, you will have to generate a new key and copy the
-corresponding public key to other machines.
-.Pp
-There is also a comment field in the key file that is only for
-convenience to the user to help identify the key. The comment can
-tell what the key is for, or whatever is useful. The comment is
-initialized to
-.Dq user@host
-when the key is created, but can be changed using the
-.Fl c
-option.
-.Pp
-The options are as follows:
-.Bl -tag -width Ds
-.It Fl b Ar bits
-Specifies the number of bits in the key to create. Minimum is 512
-bits. Generally 1024 bits is considered sufficient, and key sizes
-above that no longer improve security but make things slower. The
-default is 1024 bits.
-.It Fl c
-Requests changing the comment in the private and public key files.
-The program will prompt for the file containing the private keys, for
-passphrase if the key has one, and for the new comment.
-.It Fl p
-Requests changing the passphrase of a private key file instead of
-creating a new private key. The program will prompt for the file
-containing the private key, for the old passphrase, and twice for the
-new passphrase.
-.It Fl q
-Silence
-.Nm ssh-keygen .
-Used by
-.Pa /etc/rc
-when creating a new key.
-.It Fl C Ar comment
-Provides the new comment.
-.It Fl N Ar new_passphrase
-Provides the new passphrase.
-.It Fl P Ar passphrase
-Provides the (old) passphrase.
-.El
-.Sh FILES
-.Bl -tag -width Ds
-.It Pa $HOME/.ssh/random_seed
-Used for seeding the random number generator. This file should not be
-readable by anyone but the user. This file is created the first time
-the program is run, and is updated every time.
-.It Pa $HOME/.ssh/identity
-Contains the RSA authentication identity of the user. This file
-should not be readable by anyone but the user. It is possible to
-specify a passphrase when generating the key; that passphrase will be
-used to encrypt the private part of this file using 3DES. This file
-is not automatically accessed by
-.Nm
-but it is offered as the default file for the private key.
-.It Pa $HOME/.ssh/identity.pub
-Contains the public key for authentication. The contents of this file
-should be added to
-.Pa $HOME/.ssh/authorized_keys
-on all machines
-where you wish to log in using RSA authentication. There is no
-need to keep the contents of this file secret.
-.Sh AUTHOR
-Tatu Ylonen <ylo@cs.hut.fi>
-.Pp
-OpenSSH
-is a derivative of the original (free) ssh 1.2.12 release, but with bugs
-removed and newer features re-added. Rapidly after the 1.2.12 release,
-newer versions bore successively more restrictive licenses. This version
-of OpenSSH
-.Bl -bullet
-.It
-has all components of a restrictive nature (ie. patents, see
-.Xr ssl 8 )
-directly removed from the source code; any licensed or patented components
-are chosen from
-external libraries.
-.It
-has been updated to support ssh protocol 1.5.
-.It
-contains added support for
-.Xr kerberos 8
-authentication and ticket passing.
-.It
-supports one-time password authentication with
-.Xr skey 1 .
-.El
-.Pp
-The libraries described in
-.Xr ssl 8
-are required for proper operation.
-.Sh SEE ALSO
-.Xr ssh 1 ,
-.Xr ssh-add 1 ,
-.Xr ssh-agent 1,
-.Xr sshd 8 ,
-.Xr ssl 8
diff --git a/openssh.1 b/openssh.1
deleted file mode 100644
index 21a4e63c..00000000
--- a/openssh.1
+++ /dev/null
@@ -1,966 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" ssh.1.in
-.\"
-.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
-.\"
-.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-.\" All rights reserved
-.\"
-.\" Created: Sat Apr 22 21:55:14 1995 ylo
-.\"
-.\" $Id: openssh.1,v 1.1 1999/10/28 04:03:14 damien Exp $
-.\"
-.Dd September 25, 1999
-.Dt SSH 1
-.Os
-.Sh NAME
-.Nm ssh
-.Nd OpenSSH secure shell client (remote login program)
-.Sh SYNOPSIS
-.Nm ssh
-.Op Fl l Ar login_name
-.Op Ar hostname | user@hostname
-.Op Ar command
-.Pp
-.Nm ssh
-.Op Fl afgknqtvxCPX
-.Op Fl c Ar blowfish | 3des
-.Op Fl e Ar escape_char
-.Op Fl i Ar identity_file
-.Op Fl l Ar login_name
-.Op Fl o Ar option
-.Op Fl p Ar port
-.Oo Fl L Xo
-.Sm off
-.Ar host :
-.Ar port :
-.Ar hostport
-.Sm on
-.Xc
-.Oc
-.Oo Fl R Xo
-.Sm off
-.Ar host :
-.Ar port :
-.Ar hostport
-.Sm on
-.Xc
-.Oc
-.Op Ar hostname | user@hostname
-.Op Ar command
-.Sh DESCRIPTION
-.Nm
-(Secure Shell) is a program for logging into a remote machine and for
-executing commands on a remote machine. It is intended to replace
-rlogin and rsh, and provide secure encrypted communications between
-two untrusted hosts over an insecure network. X11 connections and
-arbitrary TCP/IP ports can also be forwarded over the secure channel.
-.Pp
-.Nm
-connects and logs into the specified
-.Ar hostname .
-The user must prove
-his/her identity to the remote machine using one of several methods.
-.Pp
-First, if the machine the user logs in from is listed in
-.Pa /etc/hosts.equiv
-or
-.Pa /etc/openssh/shosts.equiv
-on the remote machine, and the user names are
-the same on both sides, the user is immediately permitted to log in.
-Second, if
-.Pa \&.rhosts
-or
-.Pa \&.shosts
-exists in the user's home directory on the
-remote machine and contains a line containing the name of the client
-machine and the name of the user on that machine, the user is
-permitted to log in. This form of authentication alone is normally not
-allowed by the server because it is not secure.
-.Pp
-The second (and primary) authentication method is the
-.Pa rhosts
-or
-.Pa hosts.equiv
-method combined with RSA-based host authentication. It
-means that if the login would be permitted by
-.Pa \&.rhosts ,
-.Pa \&.shosts ,
-.Pa /etc/hosts.equiv ,
-or
-.Pa /etc/openssh/shosts.equiv ,
-and if additionally the server can verify the client's
-host key (see
-.Pa /etc/openssh/ssh_known_hosts
-in the
-.Sx FILES
-section), only then login is
-permitted. This authentication method closes security holes due to IP
-spoofing, DNS spoofing and routing spoofing. [Note to the
-administrator:
-.Pa /etc/hosts.equiv ,
-.Pa \&.rhosts ,
-and the rlogin/rsh protocol in general, are inherently insecure and should be
-disabled if security is desired.]
-.Pp
-As a third authentication method,
-.Nm
-supports RSA based authentication.
-The scheme is based on public-key cryptography: there are cryptosystems
-where encryption and decryption are done using separate keys, and it
-is not possible to derive the decryption key from the encryption key.
-RSA is one such system. The idea is that each user creates a public/private
-key pair for authentication purposes. The
-server knows the public key, and only the user knows the private key.
-The file
-.Pa $HOME/.ssh/authorized_keys
-lists the public keys that are permitted for logging
-in. When the user logs in, the
-.Nm
-program tells the server which key pair it would like to use for
-authentication. The server checks if this key is permitted, and if
-so, sends the user (actually the
-.Nm
-program running on behalf of the user) a challenge, a random number,
-encrypted by the user's public key. The challenge can only be
-decrypted using the proper private key. The user's client then decrypts the
-challenge using the private key, proving that he/she knows the private
-key but without disclosing it to the server.
-.Pp
-.Nm
-implements the RSA authentication protocol automatically. The user
-creates his/her RSA key pair by running
-.Xr ssh-keygen 1 .
-This stores the private key in
-.Pa \&.ssh/identity
-and the public key in
-.Pa \&.ssh/identity.pub
-in the user's home directory. The user should then
-copy the
-.Pa identity.pub
-to
-.Pa \&.ssh/authorized_keys
-in his/her home directory on the remote machine (the
-.Pa authorized_keys
-file corresponds to the conventional
-.Pa \&.rhosts
-file, and has one key
-per line, though the lines can be very long). After this, the user
-can log in without giving the password. RSA authentication is much
-more secure than rhosts authentication.
-.Pp
-The most convenient way to use RSA authentication may be with an
-authentication agent. See
-.Xr ssh-agent 1
-for more information.
-.Pp
-If other authentication methods fail,
-.Nm
-prompts the user for a password. The password is sent to the remote
-host for checking; however, since all communications are encrypted,
-the password cannot be seen by someone listening on the network.
-.Pp
-When the user's identity has been accepted by the server, the server
-either executes the given command, or logs into the machine and gives
-the user a normal shell on the remote machine. All communication with
-the remote command or shell will be automatically encrypted.
-.Pp
-If a pseudo-terminal has been allocated (normal login session), the
-user can disconnect with
-.Ic ~. ,
-and suspend
-.Nm
-with
-.Ic ~^Z .
-All forwarded connections can be listed with
-.Ic ~#
-and if
-the session blocks waiting for forwarded X11 or TCP/IP
-connections to terminate, it can be backgrounded with
-.Ic ~&
-(this should not be used while the user shell is active, as it can cause the
-shell to hang). All available escapes can be listed with
-.Ic ~? .
-.Pp
-A single tilde character can be sent as
-.Ic ~~
-(or by following the tilde by a character other than those described above).
-The escape character must always follow a newline to be interpreted as
-special. The escape character can be changed in configuration files
-or on the command line.
-.Pp
-If no pseudo tty has been allocated, the
-session is transparent and can be used to reliably transfer binary
-data. On most systems, setting the escape character to
-.Dq none
-will also make the session transparent even if a tty is used.
-.Pp
-The session terminates when the command or shell in on the remote
-machine exists and all X11 and TCP/IP connections have been closed.
-The exit status of the remote program is returned as the exit status
-of
-.Nm ssh .
-.Pp
-If the user is using X11 (the
-.Ev DISPLAY
-environment variable is set), the connection to the X11 display is
-automatically forwarded to the remote side in such a way that any X11
-programs started from the shell (or command) will go through the
-encrypted channel, and the connection to the real X server will be made
-from the local machine. The user should not manually set
-.Ev DISPLAY .
-Forwarding of X11 connections can be
-configured on the command line or in configuration files.
-.Pp
-The
-.Ev DISPLAY
-value set by
-.Nm
-will point to the server machine, but with a display number greater
-than zero. This is normal, and happens because
-.Nm
-creates a
-.Dq proxy
-X server on the server machine for forwarding the
-connections over the encrypted channel.
-.Pp
-.Nm
-will also automatically set up Xauthority data on the server machine.
-For this purpose, it will generate a random authorization cookie,
-store it in Xauthority on the server, and verify that any forwarded
-connections carry this cookie and replace it by the real cookie when
-the connection is opened. The real authentication cookie is never
-sent to the server machine (and no cookies are sent in the plain).
-.Pp
-If the user is using an authentication agent, the connection to the agent
-is automatically forwarded to the remote side unless disabled on
-command line or in a configuration file.
-.Pp
-Forwarding of arbitrary TCP/IP connections over the secure channel can
-be specified either on command line or in a configuration file. One
-possible application of TCP/IP forwarding is a secure connection to an
-electronic purse; another is going trough firewalls.
-.Pp
-.Nm
-automatically maintains and checks a database containing RSA-based
-identifications for all hosts it has ever been used with. The
-database is stored in
-.Pa \&.ssh/known_hosts
-in the user's home directory. Additionally, the file
-.Pa /etc/openssh/ssh_known_hosts
-is automatically checked for known hosts. Any new hosts are
-automatically added to the user's file. If a host's identification
-ever changes,
-.Nm
-warns about this and disables password authentication to prevent a
-trojan horse from getting the user's password. Another purpose of
-this mechanism is to prevent man-in-the-middle attacks which could
-otherwise be used to circumvent the encryption. The
-.Cm StrictHostKeyChecking
-option (see below) can be used to prevent logins to machines whose
-host key is not known or has changed.
-.Sh OPTIONS
-.Bl -tag -width Ds
-.It Fl a
-Disables forwarding of the authentication agent connection. This may
-also be specified on a per-host basis in the configuration file.
-.It Fl c Ar blowfish|3des
-Selects the cipher to use for encrypting the session.
-.Ar 3des
-is used by default. It is believed to be secure.
-.Ar 3des
-(triple-des) is an encrypt-decrypt-encrypt triple with three different keys.
-It is presumably more secure than the
-.Ar des
-cipher which is no longer supported in ssh.
-.Ar blowfish
-is a fast block cipher, it appears very secure and is much faster than
-.Ar 3des .
-.It Fl e Ar ch|^ch|none
-Sets the escape character for sessions with a pty (default:
-.Ql ~ ) .
-The escape character is only recognized at the beginning of a line. The
-escape character followed by a dot
-.Pq Ql \&.
-closes the connection, followed
-by control-Z suspends the connection, and followed by itself sends the
-escape character once. Setting the character to
-.Dq none
-disables any escapes and makes the session fully transparent.
-.It Fl f
-Requests
-.Nm
-to go to background after authentication. This is useful
-if
-.Nm
-is going to ask for passwords or passphrases, but the user
-wants it in the background. This implies
-.Fl n .
-The recommended way to start X11 programs at a remote site is with
-something like
-.Ic ssh -f host xterm .
-.It Fl i Ar identity_file
-Selects the file from which the identity (private key) for
-RSA authentication is read. Default is
-.Pa \&.ssh/identity
-in the user's home directory. Identity files may also be specified on
-a per-host basis in the configuration file. It is possible to have
-multiple
-.Fl i
-options (and multiple identities specified in
-configuration files).
-.It Fl g
-Allows remote hosts to connect to local forwarded ports.
-.It Fl k
-Disables forwarding of Kerberos tickets and AFS tokens. This may
-also be specified on a per-host basis in the configuration file.
-.It Fl l Ar login_name
-Specifies the user to log in as on the remote machine. This may also
-be specified on a per-host basis in the configuration file.
-.It Fl n
-Redirects stdin from
-.Pa /dev/null
-(actually, prevents reading from stdin).
-This must be used when
-.Nm
-is run in the background. A common trick is to use this to run X11
-programs in a remote machine. For example,
-.Ic ssh -n shadows.cs.hut.fi emacs &
-will start an emacs on shadows.cs.hut.fi, and the X11
-connection will be automatically forwarded over an encrypted channel.
-The
-.Nm
-program will be put in the background.
-(This does not work if
-.Nm
-needs to ask for a password or passphrase; see also the
-.Fl f
-option.)
-.It Fl o Ar option
-Can be used to give options in the format used in the config file.
-This is useful for specifying options for which there is no separate
-command-line flag. The option has the same format as a line in the
-configuration file.
-.It Fl p Ar port
-Port to connect to on the remote host. This can be specified on a
-per-host basis in the configuration file.
-.It Fl P
-Use a non-privileged port for outgoing connections.
-This can be used if your firewall does
-not permit connections from privileged ports.
-Note that this option turns of
-.Cm RhostsAuthentication
-and
-.Cm RhostsRSAAuthentication .
-.It Fl q
-Quiet mode. Causes all warning and diagnostic messages to be
-suppressed. Only fatal errors are displayed.
-.It Fl t
-Force pseudo-tty allocation. This can be used to execute arbitary
-screen-based programs on a remote machine, which can be very useful
-e.g. when implementing menu services.
-.It Fl v
-Verbose mode. Causes
-.Nm
-to print debugging messages about its progress. This is helpful in
-debugging connection, authentication, and configuration problems.
-The verbose mode is also used to display
-.Xr skey 1
-challenges, if the user entered "s/key" as password.
-.It Fl x
-Disables X11 forwarding. This can also be specified on a per-host
-basis in a configuration file.
-.It Fl X
-Enables X11 forwarding.
-.It Fl C
-Requests compression of all data (including stdin, stdout, stderr, and
-data for forwarded X11 and TCP/IP connections). The compression
-algorithm is the same used by gzip, and the
-.Dq level
-can be controlled by the
-.Cm CompressionLevel
-option (see below). Compression is desirable on modem lines and other
-slow connections, but will only slow down things on fast networks.
-The default value can be set on a host-by-host basis in the
-configuration files; see the
-.Cm Compress
-option below.
-.It Fl L Ar port:host:hostport
-Specifies that the given port on the local (client) host is to be
-forwarded to the given host and port on the remote side. This works
-by allocating a socket to listen to
-.Ar port
-on the local side, and whenever a connection is made to this port, the
-connection is forwarded over the secure channel, and a connection is
-made to
-.Ar host:hostport
-from the remote machine. Port forwardings can also be specified in the
-configuration file. Only root can forward privileged ports.
-.It Fl R Ar port:host:hostport
-Specifies that the given port on the remote (server) host is to be
-forwarded to the given host and port on the local side. This works
-by allocating a socket to listen to
-.Ar port
-on the remote side, and whenever a connection is made to this port, the
-connection is forwarded over the secure channel, and a connection is
-made to
-.Ar host:hostport
-from the local machine. Port forwardings can also be specified in the
-configuration file. Privileged ports can be forwarded only when
-logging in as root on the remote machine.
-.El
-.Sh CONFIGURATION FILES
-.Nm
-obtains configuration data from the following sources (in this order):
-command line options, user's configuration file
-.Pq Pa $HOME/.ssh/config ,
-and system-wide configuration file
-.Pq Pa /etc/openssh/ssh_config .
-For each parameter, the first obtained value
-will be used. The configuration files contain sections bracketed by
-"Host" specifications, and that section is only applied for hosts that
-match one of the patterns given in the specification. The matched
-host name is the one given on the command line.
-.Pp
-Since the first obtained value for each parameter is used, more
-host-specific declarations should be given near the beginning of the
-file, and general defaults at the end.
-.Pp
-The configuration file has the following format:
-.Pp
-Empty lines and lines starting with
-.Ql #
-are comments.
-.Pp
-Otherwise a line is of the format
-.Dq keyword arguments .
-The possible
-keywords and their meanings are as follows (note that the
-configuration files are case-sensitive):
-.Bl -tag -width Ds
-.It Cm Host
-Restricts the following declarations (up to the next
-.Cm Host
-keyword) to be only for those hosts that match one of the patterns
-given after the keyword.
-.Ql \&*
-and
-.Ql ?
-can be used as wildcards in the
-patterns. A single
-.Ql \&*
-as a pattern can be used to provide global
-defaults for all hosts. The host is the
-.Ar hostname
-argument given on the command line (i.e., the name is not converted to
-a canonicalized host name before matching).
-.It Cm AFSTokenPassing
-Specifies whether to pass AFS tokens to remote host. The argument to
-this keyword must be
-.Dq yes
-or
-.Dq no .
-.It Cm BatchMode
-If set to
-.Dq yes ,
-passphrase/password querying will be disabled. This
-option is useful in scripts and other batch jobs where you have no
-user to supply the password. The argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm Cipher
-Specifies the cipher to use for encrypting the session. Currently,
-.Dq blowfish ,
-and
-.Dq 3des
-are supported. The default is
-.Dq 3des .
-.It Cm Compression
-Specifies whether to use compression. The argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm CompressionLevel
-Specifies the compression level to use if compression is enable. The
-argument must be an integer from 1 (fast) to 9 (slow, best). The
-default level is 6, which is good for most applications. The meaning
-of the values is the same as in GNU GZIP.
-.It Cm ConnectionAttempts
-Specifies the number of tries (one per second) to make before falling
-back to rsh or exiting. The argument must be an integer. This may be
-useful in scripts if the connection sometimes fails.
-.It Cm EscapeChar
-Sets the escape character (default:
-.Ql ~ ) .
-The escape character can also
-be set on the command line. The argument should be a single
-character,
-.Ql ^
-followed by a letter, or
-.Dq none
-to disable the escape
-character entirely (making the connection transparent for binary
-data).
-.It Cm FallBackToRsh
-Specifies that if connecting via
-.Nm
-fails due to a connection refused error (there is no
-.Xr sshd 8
-listening on the remote host),
-.Xr rsh 1
-should automatically be used instead (after a suitable warning about
-the session being unencrypted). The argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm ForwardAgent
-Specifies whether the connection to the authentication agent (if any)
-will be forwarded to the remote machine. The argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm ForwardX11
-Specifies whether X11 connections will be automatically redirected
-over the secure channel and
-.Ev DISPLAY
-set. The argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm GatewayPorts
-Specifies whether remote hosts are allowed to connect to local
-forwarded ports.
-The argument must be
-.Dq yes
-or
-.Dq no .
-The default is
-.Dq no .
-.It Cm GlobalKnownHostsFile
-Specifies a file to use instead of
-.Pa /etc/openssh/ssh_known_hosts .
-.It Cm HostName
-Specifies the real host name to log into. This can be used to specify
-nicnames or abbreviations for hosts. Default is the name given on the
-command line. Numeric IP addresses are also permitted (both on the
-command line and in
-.Cm HostName
-specifications).
-.It Cm IdentityFile
-Specifies the file from which the user's RSA authentication identity
-is read (default
-.Pa .ssh/identity
-in the user's home directory).
-Additionally, any identities represented by the authentication agent
-will be used for authentication. The file name may use the tilde
-syntax to refer to a user's home directory. It is possible to have
-multiple identity files specified in configuration files; all these
-identities will be tried in sequence.
-.It Cm KeepAlive
-Specifies whether the system should send keepalive messages to the
-other side. If they are sent, death of the connection or crash of one
-of the machines will be properly noticed. However, this means that
-connections will die if the route is down temporarily, and some people
-find it annoying.
-.Pp
-The default is
-.Dq yes
-(to send keepalives), and the client will notice
-if the network goes down or the remote host dies. This is important
-in scripts, and many users want it too.
-.Pp
-To disable keepalives, the value should be set to
-.Dq no
-in both the server and the client configuration files.
-.It Cm KerberosAuthentication
-Specifies whether Kerberos authentication will be used. The argument to
-this keyword must be
-.Dq yes
-or
-.Dq no .
-.It Cm KerberosTgtPassing
-Specifies whether a Kerberos TGT will be forwarded to the server. This
-will only work if the Kerberos server is actually an AFS kaserver. The
-argument to this keyword must be
-.Dq yes
-or
-.Dq no .
-.It Cm LocalForward
-Specifies that a TCP/IP port on the local machine be forwarded over
-the secure channel to given host:port from the remote machine. The
-first argument must be a port number, and the second must be
-host:port. Multiple forwardings may be specified, and additional
-forwardings can be given on the command line. Only the root can
-forward privileged ports.
-.It Cm PasswordAuthentication
-Specifies whether to use password authentication. The argument to
-this keyword must be
-.Dq yes
-or
-.Dq no .
-.It Cm NumberOfPasswordPrompts
-Specifies the number of password prompts before giving up. The
-argument to this keyword must be an integer. Default is 3.
-.It Cm Port
-Specifies the port number to connect on the remote host. Default is
-22.
-.It Cm ProxyCommand
-Specifies the command to use to connect to the server. The command
-string extends to the end of the line, and is executed with /bin/sh.
-In the command string, %h will be substituted by the host name to
-connect and %p by the port. The command can be basically anything,
-and should read from its stdin and write to its stdout. It should
-eventually connect an
-.Xr sshd 8
-server running on some machine, or execute
-.Ic sshd -i
-somewhere. Host key management will be done using the
-HostName of the host being connected (defaulting to the name typed by
-the user).
-.Pp
-.It Cm RemoteForward
-Specifies that a TCP/IP port on the remote machine be forwarded over
-the secure channel to given host:port from the local machine. The
-first argument must be a port number, and the second must be
-host:port. Multiple forwardings may be specified, and additional
-forwardings can be given on the command line. Only the root can
-forward privileged ports.
-.It Cm RhostsAuthentication
-Specifies whether to try rhosts based authentication. Note that this
-declaration only affects the client side and has no effect whatsoever
-on security. Disabling rhosts authentication may reduce
-authentication time on slow connections when rhosts authentication is
-not used. Most servers do not permit RhostsAuthentication because it
-is not secure (see RhostsRSAAuthentication). The argument to this
-keyword must be
-.Dq yes
-or
-.Dq no .
-.It Cm RhostsRSAAuthentication
-Specifies whether to try rhosts based authentication with RSA host
-authentication. This is the primary authentication method for most
-sites. The argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm RSAAuthentication
-Specifies whether to try RSA authentication. The argument to this
-keyword must be
-.Dq yes
-or
-.Dq no .
-RSA authentication will only be
-attempted if the identity file exists, or an authentication agent is
-running.
-.It Cm CheckHostIP
-If this flag is set to
-.Dq yes ,
-ssh will additionally check the host ip address in the
-.Pa known_hosts
-file. This allows ssh to detect if a host key changed due to DNS spoofing.
-If the option is set to
-.Dq no ,
-the check will not be executed.
-.It Cm StrictHostKeyChecking
-If this flag is set to
-.Dq yes ,
-.Nm
-ssh will never automatically add host keys to the
-.Pa $HOME/.ssh/known_hosts
-file, and refuses to connect hosts whose host key has changed. This
-provides maximum protection against trojan horse attacks. However, it
-can be somewhat annoying if you don't have good
-.Pa /etc/openssh/ssh_known_hosts
-files installed and frequently
-connect new hosts. Basically this option forces the user to manually
-add any new hosts. Normally this option is disabled, and new hosts
-will automatically be added to the known host files. The host keys of
-known hosts will be verified automatically in either case. The
-argument must be
-.Dq yes
-or
-.Dq no .
-.It Cm User
-Specifies the user to log in as. This can be useful if you have a
-different user name in different machines. This saves the trouble of
-having to remember to give the user name on the command line.
-.It Cm UserKnownHostsFile
-Specifies a file to use instead of
-.Pa $HOME/.ssh/known_hosts .
-.It Cm UsePrivilegedPort
-Specifies whether to use a privileged port for outgoing connections.
-The argument must be
-.Dq yes
-or
-.Dq no .
-The default is
-.Dq yes .
-Note that setting this option to
-.Dq no
-turns of
-.Cm RhostsAuthentication
-and
-.Cm RhostsRSAAuthentication .
-.It Cm UseRsh
-Specifies that rlogin/rsh should be used for this host. It is
-possible that the host does not at all support the
-.Nm
-protocol. This causes
-.Nm
-to immediately exec
-.Xr rsh 1 .
-All other options (except
-.Cm HostName )
-are ignored if this has been specified. The argument must be
-.Dq yes
-or
-.Dq no .
-.Sh ENVIRONMENT
-.Nm
-will normally set the following environment variables:
-.Bl -tag -width Ds
-.It Ev DISPLAY
-The
-.Ev DISPLAY
-variable indicates the location of the X11 server. It is
-automatically set by
-.Nm
-to point to a value of the form
-.Dq hostname:n
-where hostname indicates
-the host where the shell runs, and n is an integer >= 1. Ssh uses
-this special value to forward X11 connections over the secure
-channel. The user should normally not set DISPLAY explicitly, as that
-will render the X11 connection insecure (and will require the user to
-manually copy any required authorization cookies).
-.It Ev HOME
-Set to the path of the user's home directory.
-.It Ev LOGNAME
-Synonym for
-.Ev USER ;
-set for compatibility with systems that use this variable.
-.It Ev MAIL
-Set to point the user's mailbox.
-.It Ev PATH
-Set to the default
-.Ev PATH ,
-as specified when compiling
-.Nm ssh .
-.It Ev SSH_AUTH_SOCK
-indicates the path of a unix-domain socket used to communicate with the
-agent.
-.It Ev SSH_CLIENT
-Identifies the client end of the connection. The variable contains
-three space-separated values: client ip-address, client port number,
-and server port number.
-.It Ev SSH_TTY
-This is set to the name of the tty (path to the device) associated
-with the current shell or command. If the current session has no tty,
-this variable is not set.
-.It Ev TZ
-The timezone variable is set to indicate the present timezone if it
-was set when the daemon was started (e.i., the daemon passes the value
-on to new connections).
-.It Ev USER
-Set to the name of the user logging in.
-.El
-.Pp
-Additionally,
-.Nm
-reads
-.Pa $HOME/.ssh/environment ,
-and adds lines of the format
-.Dq VARNAME=value
-to the environment.
-.Sh FILES
-.Bl -tag -width $HOME/.ssh/known_hosts
-.It Pa $HOME/.ssh/known_hosts
-Records host keys for all hosts the user has logged into (that are not
-in
-.Pa /etc/openssh/ssh_known_hosts ) .
-See
-.Xr sshd 8 .
-.It Pa $HOME/.ssh/random_seed
-Used for seeding the random number generator. This file contains
-sensitive data and should read/write for the user and not accessible
-for others. This file is created the first time the program is run
-and updated automatically. The user should never need to read or
-modify this file.
-.It Pa $HOME/.ssh/identity
-Contains the RSA authentication identity of the user. This file
-contains sensitive data and should be readable by the user but not
-accessible by others (read/write/execute).
-Note that
-.Nm
-ignores this file if it is accessible by others.
-It is possible to specify a passphrase when
-generating the key; the passphrase will be used to encrypt the
-sensitive part of this file using 3DES.
-.It Pa $HOME/.ssh/identity.pub
-Contains the public key for authentication (public part of the
-identity file in human-readable form). The contents of this file
-should be added to
-.Pa $HOME/.ssh/authorized_keys
-on all machines
-where you wish to log in using RSA authentication. This file is not
-sensitive and can (but need not) be readable by anyone. This file is
-never used automatically and is not necessary; it is only provided for
-the convenience of the user.
-.It Pa $HOME/.ssh/config
-This is the per-user configuration file. The format of this file is
-described above. This file is used by the
-.Nm
-client. This file does not usually contain any sensitive information,
-but the recommended permissions are read/write for the user, and not
-accessible by others.
-.It Pa $HOME/.ssh/authorized_keys
-Lists the RSA keys that can be used for logging in as this user. The
-format of this file is described in the
-.Xr sshd 8
-manual page. In the simplest form the format is the same as the .pub
-identity files (that is, each line contains the number of bits in
-modulus, public exponent, modulus, and comment fields, separated by
-spaces). This file is not highly sensitive, but the recommended
-permissions are read/write for the user, and not accessible by others.
-.It Pa /etc/openssh/ssh_known_hosts
-Systemwide list of known host keys. This file should be prepared by the
-system administrator to contain the public host keys of all machines in the
-organization. This file should be world-readable. This file contains
-public keys, one per line, in the following format (fields separated
-by spaces): system name, number of bits in modulus, public exponent,
-modulus, and optional comment field. When different names are used
-for the same machine, all such names should be listed, separated by
-commas. The format is described on the
-.Xr sshd 8
-manual page.
-.Pp
-The canonical system name (as returned by name servers) is used by
-.Xr sshd 8
-to verify the client host when logging in; other names are needed because
-.Nm
-does not convert the user-supplied name to a canonical name before
-checking the key, because someone with access to the name servers
-would then be able to fool host authentication.
-.It Pa /etc/openssh/ssh_config
-Systemwide configuration file. This file provides defaults for those
-values that are not specified in the user's configuration file, and
-for those users who do not have a configuration file. This file must
-be world-readable.
-.It Pa $HOME/.rhosts
-This file is used in
-.Pa \&.rhosts
-authentication to list the
-host/user pairs that are permitted to log in. (Note that this file is
-also used by rlogin and rsh, which makes using this file insecure.)
-Each line of the file contains a host name (in the canonical form
-returned by name servers), and then a user name on that host,
-separated by a space. One some machines this file may need to be
-world-readable if the user's home directory is on a NFS partition,
-because
-.Xr sshd 8
-reads it as root. Additionally, this file must be owned by the user,
-and must not have write permissions for anyone else. The recommended
-permission for most machines is read/write for the user, and not
-accessible by others.
-.Pp
-Note that by default
-.Xr sshd 8
-will be installed so that it requires successful RSA host
-authentication before permitting \s+2.\s0rhosts authentication. If your
-server machine does not have the client's host key in
-.Pa /etc/openssh/ssh_known_hosts ,
-you can store it in
-.Pa $HOME/.ssh/known_hosts .
-The easiest way to do this is to
-connect back to the client from the server machine using ssh; this
-will automatically add the host key inxi
-.Pa $HOME/.ssh/known_hosts .
-.It Pa $HOME/.shosts
-This file is used exactly the same way as
-.Pa \&.rhosts .
-The purpose for
-having this file is to be able to use rhosts authentication with
-.Nm
-without permitting login with
-.Xr rlogin 1
-or
-.Xr rsh 1 .
-.It Pa /etc/hosts.equiv
-This file is used during
-.Pa \&.rhosts authentication. It contains
-canonical hosts names, one per line (the full format is described on
-the
-.Xr sshd 8
-manual page). If the client host is found in this file, login is
-automatically permitted provided client and server user names are the
-same. Additionally, successful RSA host authentication is normally
-required. This file should only be writable by root.
-.It Pa /etc/openssh/shosts.equiv
-This file is processed exactly as
-.Pa /etc/hosts.equiv .
-This file may be useful to permit logins using
-.Nm
-but not using rsh/rlogin.
-.It Pa /etc/openssh/sshrc
-Commands in this file are executed by
-.Nm
-when the user logs in just before the user's shell (or command) is started.
-See the
-.Xr sshd 8
-manual page for more information.
-.It Pa $HOME/.ssh/rc
-Commands in this file are executed by
-.Nm
-when the user logs in just before the user's shell (or command) is
-started.
-See the
-.Xr sshd 8
-manual page for more information.
-.It Pa libcrypto.so.X.1
-A version of this library which includes support for the RSA algorithm
-is required for proper operation.
-.Sh AUTHOR
-Tatu Ylonen <ylo@cs.hut.fi>
-.Pp
-Issues can be found from the SSH WWW home page:
-.Pp
-.Dl http://www.cs.hut.fi/ssh
-.Pp
-OpenSSH
-is a derivative of the original (free) ssh 1.2.12 release, but with bugs
-removed and newer features re-added. Rapidly after the 1.2.12 release,
-newer versions bore successively more restrictive licenses. This version
-of OpenSSH
-.Bl -bullet
-.It
-has all components of a restrictive nature (ie. patents, see
-.Xr ssl 8 )
-directly removed from the source code; any licensed or patented components
-are chosen from
-external libraries.
-.It
-has been updated to support ssh protocol 1.5.
-.It
-contains added support for
-.Xr kerberos 8
-authentication and ticket passing.
-.It
-supports one-time password authentication with
-.Xr skey 1 .
-.El
-.Pp
-The libraries described in
-.Xr ssl 8
-are required for proper operation.
-.Sh SEE ALSO
-.Xr rlogin 1 ,
-.Xr rsh 1 ,
-.Xr scp 1 ,
-.Xr ssh-add 1 ,
-.Xr ssh-agent 1 ,
-.Xr ssh-keygen 1 ,
-.Xr telnet 1 ,
-.Xr sshd 8 ,
-.Xr ssl 8
diff --git a/openssh.spec b/openssh.spec
index 5775cb41..99029364 100644
--- a/openssh.spec
+++ b/openssh.spec
@@ -32,7 +32,7 @@ patented algorithms to seperate libraries (OpenSSL).
%build
-./configure --prefix=/usr --sysconfdir=/etc/openssh
+./configure --prefix=/usr --sysconfdir=/etc/ssh
make OPT_FLAGS="$RPM_OPT_FLAGS"
%install
@@ -41,71 +41,53 @@ mkdir -p $RPM_BUILD_ROOT/usr/bin
mkdir -p $RPM_BUILD_ROOT/usr/sbin
mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
mkdir -p $RPM_BUILD_ROOT/etc/pam.d
-mkdir -p $RPM_BUILD_ROOT/etc/openssh
+mkdir -p $RPM_BUILD_ROOT/etc/ssh
mkdir -p $RPM_BUILD_ROOT/usr/man/man1
mkdir -p $RPM_BUILD_ROOT/usr/man/man8
-install -m644 opensshd.pam $RPM_BUILD_ROOT/etc/pam.d/opensshd
-install -m755 opensshd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/opensshd
-install -m600 ssh_config $RPM_BUILD_ROOT/etc/openssh/ssh_config
-install -m600 sshd_config $RPM_BUILD_ROOT/etc/openssh/sshd_config
-
-install -s -m755 bin/opensshd $RPM_BUILD_ROOT/usr/sbin
-install -s -m755 bin/openssh $RPM_BUILD_ROOT/usr/bin
-install -s -m755 bin/openscp $RPM_BUILD_ROOT/usr/bin
-install -s -m755 bin/openssh-agent $RPM_BUILD_ROOT/usr/bin
-install -s -m755 bin/openssh-add $RPM_BUILD_ROOT/usr/bin
-install -s -m755 bin/openssh-keygen $RPM_BUILD_ROOT/usr/bin
-
-install -m644 opensshd.8 $RPM_BUILD_ROOT/usr/man/man8
-install -m644 openssh.1 $RPM_BUILD_ROOT/usr/man/man1
-install -m644 openscp.1 $RPM_BUILD_ROOT/usr/man/man1
-install -m644 openssh-agent.1 $RPM_BUILD_ROOT/usr/man/man1
-install -m644 openssh-add.1 $RPM_BUILD_ROOT/usr/man/man1
-install -m644 openssh-keygen.1 $RPM_BUILD_ROOT/usr/man/man1
-
-# Install compatibility symlinks
-cd $RPM_BUILD_ROOT/usr/sbin
-ln -s opensshd sshd
-cd $RPM_BUILD_ROOT/usr/bin
-ln -s openssh ssh
-ln -s openscp scp
-ln -s openssh-agent ssh-agent
-ln -s openssh-add ssh-add
-ln -s openssh-keygen ssh-keygen
+install -m644 sshd.pam $RPM_BUILD_ROOT/etc/pam.d/sshd
+install -m755 sshd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/sshd
+install -m600 ssh_config $RPM_BUILD_ROOT/etc/ssh/ssh_config
+install -m600 sshd_config $RPM_BUILD_ROOT/etc/ssh/sshd_config
+
+install -s -m755 bin/sshd $RPM_BUILD_ROOT/usr/sbin
+install -s -m755 bin/ssh $RPM_BUILD_ROOT/usr/bin
+install -s -m755 bin/scp $RPM_BUILD_ROOT/usr/bin
+install -s -m755 bin/ssh-agent $RPM_BUILD_ROOT/usr/bin
+install -s -m755 bin/ssh-add $RPM_BUILD_ROOT/usr/bin
+install -s -m755 bin/ssh-keygen $RPM_BUILD_ROOT/usr/bin
+
+install -m644 sshd.8 $RPM_BUILD_ROOT/usr/man/man8
+install -m644 ssh.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 scp.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 ssh-agent.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 ssh-add.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 ssh-keygen.1 $RPM_BUILD_ROOT/usr/man/man1
%clean
rm -rf $RPM_BUILD_ROOT
%post
-/sbin/chkconfig --add opensshd
-if [ ! -f /etc/openssh/ssh_host_key -o ! -s /etc/openssh/ssh_host_key ]; then
- /usr/bin/openssh-keygen -b 1024 -f /etc/openssh/ssh_host_key -N '' >&2
+/sbin/chkconfig --add sshd
+if [ ! -f /etc/ssh/ssh_host_key -o ! -s /etc/ssh/ssh_host_key ]; then
+ /usr/bin/ssh-keygen -b 1024 -f /etc/ssh/ssh_host_key -N '' >&2
fi
-if test -r /var/run/opensshd.pid
+if test -r /var/run/sshd.pid
then
- /etc/rc.d/init.d/opensshd restart >&2
+ /etc/rc.d/init.d/sshd restart >&2
fi
%preun
if [ "$1" = 0 ]
then
- /etc/rc.d/init.d/opensshd stop >&2
- /sbin/chkconfig --del opensshd
+ /etc/rc.d/init.d/sshd stop >&2
+ /sbin/chkconfig --del sshd
fi
%files
%defattr(-,root,root)
%doc COPYING.Ylonen ChangeLog ChangeLog.Ylonen OVERVIEW
%doc README README.openssh
-%attr(0755,root,root) /usr/sbin/opensshd
-%attr(0755,root,root) /usr/bin/openssh
-%attr(0755,root,root) /usr/bin/openssh-agent
-%attr(0755,root,root) /usr/bin/openssh-keygen
-%attr(0755,root,root) /usr/bin/openssh-add
-%attr(0755,root,root) /usr/bin/openscp
-
-# Symlinks
%attr(0755,root,root) /usr/sbin/sshd
%attr(0755,root,root) /usr/bin/ssh
%attr(0755,root,root) /usr/bin/ssh-agent
@@ -113,15 +95,15 @@ fi
%attr(0755,root,root) /usr/bin/ssh-add
%attr(0755,root,root) /usr/bin/scp
-%attr(0755,root,root) /usr/man/man8/opensshd.8
-%attr(0755,root,root) /usr/man/man1/openssh.1
-%attr(0755,root,root) /usr/man/man1/openssh-agent.1
-%attr(0755,root,root) /usr/man/man1/openssh-keygen.1
-%attr(0755,root,root) /usr/man/man1/openssh-add.1
-%attr(0755,root,root) /usr/man/man1/openscp.1
-
-%attr(0600,root,root) %config /etc/openssh/sshd_config
-%attr(0600,root,root) %config /etc/pam.d/opensshd
-%attr(0755,root,root) %config /etc/rc.d/init.d/opensshd
-%attr(0644,root,root) %config /etc/openssh/ssh_config
+%attr(0755,root,root) /usr/man/man8/sshd.8
+%attr(0755,root,root) /usr/man/man1/ssh.1
+%attr(0755,root,root) /usr/man/man1/ssh-agent.1
+%attr(0755,root,root) /usr/man/man1/ssh-keygen.1
+%attr(0755,root,root) /usr/man/man1/ssh-add.1
+%attr(0755,root,root) /usr/man/man1/scp.1
+
+%attr(0600,root,root) %config /etc/ssh/sshd_config
+%attr(0600,root,root) %config /etc/pam.d/sshd
+%attr(0755,root,root) %config /etc/rc.d/init.d/sshd
+%attr(0644,root,root) %config /etc/ssh/ssh_config
diff --git a/opensshd.8 b/opensshd.8
deleted file mode 100644
index d96ae330..00000000
--- a/opensshd.8
+++ /dev/null
@@ -1,781 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" sshd.8.in
-.\"
-.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
-.\"
-.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-.\" All rights reserved
-.\"
-.\" Created: Sat Apr 22 21:55:14 1995 ylo
-.\"
-.\" $Id: opensshd.8,v 1.1 1999/10/28 04:03:14 damien Exp $
-.\"
-.Dd September 25, 1999
-.Dt SSHD 8
-.Os
-.Sh NAME
-.Nm sshd
-.Nd secure shell daemon
-.Sh SYNOPSIS
-.Nm sshd
-.Op Fl diq
-.Op Fl b Ar bits
-.Op Fl f Ar config_file
-.Op Fl g Ar login_grace_time
-.Op Fl h Ar host_key_file
-.Op Fl k Ar key_gen_time
-.Op Fl p Ar port
-.Sh DESCRIPTION
-.Nm
-(Secure Shell Daemon) is the daemon program for
-.Xr ssh 1 .
-Together these programs replace rlogin and rsh programs, and
-provide secure encrypted communications between two untrusted hosts
-over an insecure network. The programs are intended to be as easy to
-install and use as possible.
-.Pp
-.Nm
-is the daemon that listens for connections from clients. It is
-normally started at boot from
-.Pa /etc/rc .
-It forks a new
-daemon for each incoming connection. The forked daemons handle
-key exchange, encryption, authentication, command execution,
-and data exchange.
-.Pp
-.Nm
-works as follows. Each host has a host-specific RSA key
-(normally 1024 bits) used to identify the host. Additionally, when
-the daemon starts, it generates a server RSA key (normally 768 bits).
-This key is normally regenerated every hour if it has been used, and
-is never stored on disk.
-.Pp
-Whenever a client connects the daemon, the daemon sends its host
-and server public keys to the client. The client compares the
-host key against its own database to verify that it has not changed.
-The client then generates a 256 bit random number. It encrypts this
-random number using both the host key and the server key, and sends
-the encrypted number to the server. Both sides then start to use this
-random number as a session key which is used to encrypt all further
-communications in the session. The rest of the session is encrypted
-using a conventional cipher, currently Blowfish and 3DES, with 3DES
-being is used by default. The client selects the encryption algorithm
-to use from those offered by the server.
-.Pp
-Next, the server and the client enter an authentication dialog. The
-client tries to authenticate itself using
-.Pa .rhosts
-authentication,
-.Pa .rhosts
-authentication combined with RSA host
-authentication, RSA challenge-response authentication, or password
-based authentication.
-.Pp
-Rhosts authentication is normally disabled
-because it is fundamentally insecure, but can be enabled in the server
-configuration file if desired. System security is not improved unless
-.Xr rshd 8 ,
-.Xr rlogind 8 ,
-.Xr rexecd 8 ,
-and
-.Xr rexd 8
-are disabled (thus completely disabling
-.Xr rlogin 1
-and
-.Xr rsh 1
-into that machine).
-.Pp
-If the client successfully authenticates itself, a dialog for
-preparing the session is entered. At this time the client may request
-things like allocating a pseudo-tty, forwarding X11 connections,
-forwarding TCP/IP connections, or forwarding the authentication agent
-connection over the secure channel.
-.Pp
-Finally, the client either requests a shell or execution of a command.
-The sides then enter session mode. In this mode, either side may send
-data at any time, and such data is forwarded to/from the shell or
-command on the server side, and the user terminal in the client side.
-.Pp
-When the user program terminates and all forwarded X11 and other
-connections have been closed, the server sends command exit status to
-the client, and both sides exit.
-.Pp
-.Nm
-can be configured using command-line options or a configuration
-file. Command-line options override values specified in the
-configuration file.
-.Pp
-The options are as follows:
-.Bl -tag -width Ds
-.It Fl b Ar bits
-Specifies the number of bits in the server key (default 768).
-.Pp
-.It Fl d
-Debug mode. The server sends verbose debug output to the system
-log, and does not put itself in the background. The server also will
-not fork and will only process one connection. This option is only
-intended for debugging for the server.
-.It Fl f Ar configuration_file
-Specifies the name of the configuration file. The default is
-.Pa /etc/openssh/sshd_config .
-.Nm
-refuses to start if there is no configuration file.
-.It Fl g Ar login_grace_time
-Gives the grace time for clients to authenticate themselves (default
-300 seconds). If the client fails to authenticate the user within
-this many seconds, the server disconnects and exits. A value of zero
-indicates no limit.
-.It Fl h Ar host_key_file
-Specifies the file from which the host key is read (default
-.Pa /etc/openssh/ssh_host_key ) .
-This option must be given if
-.Nm
-is not run as root (as the normal
-host file is normally not readable by anyone but root).
-.It Fl i
-Specifies that
-.Nm
-is being run from inetd.
-.Nm
-is normally not run
-from inetd because it needs to generate the server key before it can
-respond to the client, and this may take tens of seconds. Clients
-would have to wait too long if the key was regenerated every time.
-However, with small key sizes (e.g. 512) using
-.Nm
-from inetd may
-be feasible.
-.It Fl k Ar key_gen_time
-Specifies how often the server key is regenerated (default 3600
-seconds, or one hour). The motivation for regenerating the key fairly
-often is that the key is not stored anywhere, and after about an hour,
-it becomes impossible to recover the key for decrypting intercepted
-communications even if the machine is cracked into or physically
-seized. A value of zero indicates that the key will never be regenerated.
-.It Fl p Ar port
-Specifies the port on which the server listens for connections
-(default 22).
-.It Fl q
-Quiet mode. Nothing is sent to the system log. Normally the beginning,
-authentication, and termination of each connection is logged.
-.It Fl Q
-Do not print an error message if RSA support is missing.
-.El
-.Sh CONFIGURATION FILE
-.Nm
-reads configuration data from
-.Pa /etc/openssh/sshd_config
-(or the file specified with
-.Fl f
-on the command line). The file
-contains keyword-value pairs, one per line. Lines starting with
-.Ql #
-and empty lines are interpreted as comments.
-.Pp
-The following keywords are possible.
-.Bl -tag -width Ds
-.It Cm AFSTokenPassing
-Specifies whether an AFS token may be forwarded to the server. Default is
-.Dq yes .
-.It Cm AllowGroups
-This keyword can be followed by a number of group names, separated
-by spaces. If specified, login is allowed only for users whose primary
-group matches one of the patterns.
-.Ql \&*
-and
-.Ql ?
-can be used as
-wildcards in the patterns. Only group names are valid, a numerical group
-id isn't recognized. By default login is allowed regardless of
-the primary group.
-.Pp
-.It Cm AllowUsers
-This keyword can be followed by a number of user names, separated
-by spaces. If specified, login is allowed only for users names that
-match one of the patterns.
-.Ql \&*
-and
-.Ql ?
-can be used as
-wildcards in the patterns. Only user names are valid, a numerical user
-id isn't recognized. By default login is allowed regardless of
-the user name.
-.Pp
-.It Cm CheckMail
-Specifies whether
-.Nm
-should check for new mail for interactive logins.
-The default is
-.Dq no .
-.It Cm DenyGroups
-This keyword can be followed by a number of group names, separated
-by spaces. Users whose primary group matches one of the patterns
-aren't allowed to log in.
-.Ql \&*
-and
-.Ql ?
-can be used as
-wildcards in the patterns. Only group names are valid, a numerical group
-id isn't recognized. By default login is allowed regardless of
-the primary group.
-.Pp
-.It Cm DenyUsers
-This keyword can be followed by a number of user names, separated
-by spaces. Login is allowed disallowed for user names that match
-one of the patterns.
-.Ql \&*
-and
-.Ql ?
-can be used as
-wildcards in the patterns. Only user names are valid, a numerical user
-id isn't recognized. By default login is allowed regardless of
-the user name.
-.Pp
-.It Cm FascistLogging
-Specifies whether to use verbose logging. Verbose logging violates
-the privacy of users and is not recommended. The argument must be
-.Dq yes
-or
-.Dq no .
-The default is
-.Dq no .
-.It Cm HostKey
-Specifies the file containing the private host key (default
-.Pa /etc/openssh/ssh_host_key ) .
-Note that
-.Nm
-does not start if this file is group/world-accessible.
-.It Cm IgnoreRhosts
-Specifies that rhosts and shosts files will not be used in
-authentication.
-.Pa /etc/hosts.equiv
-and
-.Pa /etc/openssh/shosts.equiv
-are still used. The default is
-.Dq no .
-.It Cm KeepAlive
-Specifies whether the system should send keepalive messages to the
-other side. If they are sent, death of the connection or crash of one
-of the machines will be properly noticed. However, this means that
-connections will die if the route is down temporarily, and some people
-find it annoying. On the other hand, if keepalives are not send,
-sessions may hang indefinitely on the server, leaving
-.Dq ghost
-users and consuming server resources.
-.Pp
-The default is
-.Dq yes
-(to send keepalives), and the server will notice
-if the network goes down or the client host reboots. This avoids
-infinitely hanging sessions.
-.Pp
-To disable keepalives, the value should be set to
-.Dq no
-in both the server and the client configuration files.
-.It Cm KerberosAuthentication
-Specifies whether Kerberos authentication is allowed. This can
-be in the form of a Kerberos ticket, or if
-.Cm PasswordAuthentication
-is yes, the password provided by the user will be validated through
-the Kerberos KDC. Default is
-.Dq yes .
-.It Cm KerberosOrLocalPasswd
-If set then if password authentication through Kerberos fails then
-the password will be validated via any additional local mechanism
-such as
-.Pa /etc/passwd
-or SecurID. Default is
-.Dq yes .
-.It Cm KerberosTgtPassing
-Specifies whether a Kerberos TGT may be forwarded to the server.
-Default is
-.Dq no ,
-as this only works when the Kerberos KDC is actually an AFS kaserver.
-.It Cm KerberosTicketCleanup
-Specifies whether to automatically destroy the user's ticket cache
-file on logout. Default is
-.Dq yes .
-.It Cm KeyRegenerationInterval
-The server key is automatically regenerated after this many seconds
-(if it has been used). The purpose of regeneration is to prevent
-decrypting captured sessions by later breaking into the machine and
-stealing the keys. The key is never stored anywhere. If the value is
-0, the key is never regenerated. The default is 3600
-(seconds).
-.It Cm ListenAddress
-Specifies what local address
-.Nm
-should listen on.
-The default is to listen to all local addresses.
-.It Cm LoginGraceTime
-The server disconnects after this time if the user has not
-successfully logged in. If the value is 0, there is no time limit.
-The default is 600 (seconds).
-.It Cm PasswordAuthentication
-Specifies whether password authentication is allowed.
-The default is
-.Dq yes .
-.It Cm PermitEmptyPasswords
-When password authentication is allowed, it specifies whether the
-server allows login to accounts with empty password strings. The default
-is
-.Dq yes .
-.It Cm PermitRootLogin
-Specifies whether the root can log in using
-.Xr ssh 1 .
-The argument must be
-.Dq yes ,
-.Dq without-password
-or
-.Dq no .
-The default is
-.Dq yes .
-If this options is set to
-.Dq without-password
-only password authentication is disabled for root.
-.Pp
-Root login with RSA authentication when the
-.Ar command
-option has been
-specified will be allowed regardless of the value of this setting
-(which may be useful for taking remote backups even if root login is
-normally not allowed).
-.It Cm Port
-Specifies the port number that
-.Nm
-listens on. The default is 22.
-.It Cm PrintMotd
-Specifies whether
-.Nm
-should print
-.Pa /etc/motd
-when a user logs in interactively. (On some systems it is also
-printed by the shell,
-.Pa /etc/profile ,
-or equivalent.) The default is
-.Dq yes .
-.It Cm QuietMode
-Specifies whether the system runs in quiet mode. In quiet mode,
-nothing is logged in the system log, except fatal errors. The default
-is
-.Dq no .
-.It Cm RandomSeed
-Obsolete. Random number generation uses other techniques.
-.It Cm RhostsAuthentication
-Specifies whether authentication using rhosts or /etc/hosts.equiv
-files is sufficient. Normally, this method should not be permitted
-because it is insecure.
-.Cm RhostsRSAAuthentication
-should be used
-instead, because it performs RSA-based host authentication in addition
-to normal rhosts or /etc/hosts.equiv authentication.
-The default is
-.Dq no .
-.It Cm RhostsRSAAuthentication
-Specifies whether rhosts or /etc/hosts.equiv authentication together
-with successful RSA host authentication is allowed. The default is
-.Dq yes .
-.It Cm RSAAuthentication
-Specifies whether pure RSA authentication is allowed. The default is
-.Dq yes .
-.It Cm ServerKeyBits
-Defines the number of bits in the server key. The minimum value is
-512, and the default is 768.
-.It Cm SkeyAuthentication
-Specifies whether
-.Xr skey 1
-authentication is allowed. The default is
-.Dq yes .
-Note that s/key authentication is enabled only if
-.Cm PasswordAuthentication
-is allowed, too.
-.It Cm StrictModes
-Specifies whether
-.Nm
-should check file modes and ownership of the
-user's files and home directory before accepting login. This
-is normally desirable because novices sometimes accidentally leave their
-directory or files world-writable. The default is
-.Dq yes .
-.It Cm SyslogFacility
-Gives the facility code that is used when logging messages from
-.Nm sshd .
-The possible values are: DAEMON, USER, AUTH, LOCAL0, LOCAL1, LOCAL2,
-LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. The default is AUTH.
-.It Cm UseLogin
-Specifies whether
-.Xr login 1
-is used. The default is
-.Dq no .
-.It Cm X11Forwarding
-Specifies whether X11 forwarding is permitted. The default is
-.Dq yes .
-Note that disabling X11 forwarding does not improve security in any
-way, as users can always install their own forwarders.
-.It Cm X11DisplayOffset
-Specifies the first display number available for
-.Nm sshd Ns 's
-X11 forwarding. This prevents
-.Nm
-from interfering with real X11 servers.
-.El
-.Sh LOGIN PROCESS
-When a user successfully logs in,
-.Nm
-does the following:
-.Bl -enum -offset indent
-.It
-If the login is on a tty, and no command has been specified,
-prints last login time and
-.Pa /etc/motd
-(unless prevented in the configuration file or by
-.Pa $HOME/.hushlogin ;
-see the
-.Sx FILES
-section).
-.It
-If the login is on a tty, records login time.
-.It
-Checks
-.Pa /etc/nologin ;
-if it exists, prints contents and quits
-(unless root).
-.It
-Changes to run with normal user privileges.
-.It
-Sets up basic environment.
-.It
-Reads
-.Pa $HOME/.ssh/environment
-if it exists.
-.It
-Changes to user's home directory.
-.It
-If
-.Pa $HOME/.ssh/rc
-exists, runs it; else if
-.Pa /etc/openssh/sshrc
-exists, runs
-it; otherwise runs xauth. The
-.Dq rc
-files are given the X11
-authentication protocol and cookie in standard input.
-.It
-Runs user's shell or command.
-.El
-.Sh AUTHORIZED_KEYS FILE FORMAT
-The
-.Pa $HOME/.ssh/authorized_keys
-file lists the RSA keys that are
-permitted for RSA authentication. Each line of the file contains one
-key (empty lines and lines starting with a
-.Ql #
-are ignored as
-comments). Each line consists of the following fields, separated by
-spaces: options, bits, exponent, modulus, comment. The options field
-is optional; its presence is determined by whether the line starts
-with a number or not (the option field never starts with a number).
-The bits, exponent, modulus and comment fields give the RSA key; the
-comment field is not used for anything (but may be convenient for the
-user to identify the key).
-.Pp
-Note that lines in this file are usually several hundred bytes long
-(because of the size of the RSA key modulus). You don't want to type
-them in; instead, copy the
-.Pa identity.pub
-file and edit it.
-.Pp
-The options (if present) consists of comma-separated option
-specifications. No spaces are permitted, except within double quotes.
-The following option specifications are supported:
-.Bl -tag -width Ds
-.It Cm from="pattern-list"
-Specifies that in addition to RSA authentication, the canonical name
-of the remote host must be present in the comma-separated list of
-patterns ('*' and '?' serve as wildcards). The list may also contain
-patterns negated by prefixing them with '!'; if the canonical host
-name matches a negated pattern, the key is not accepted. The purpose
-of this option is to optionally increase security: RSA authentication
-by itself does not trust the network or name servers or anything (but
-the key); however, if somebody somehow steals the key, the key
-permits an intruder to log in from anywhere in the world. This
-additional option makes using a stolen key more difficult (name
-servers and/or routers would have to be compromised in addition to
-just the key).
-.It Cm command="command"
-Specifies that the command is executed whenever this key is used for
-authentication. The command supplied by the user (if any) is ignored.
-The command is run on a pty if the connection requests a pty;
-otherwise it is run without a tty. A quote may be included in the
-command by quoting it with a backslash. This option might be useful
-to restrict certain RSA keys to perform just a specific operation. An
-example might be a key that permits remote backups but nothing
-else. Notice that the client may specify TCP/IP and/or X11
-forwardings unless they are explicitly prohibited.
-.It Cm environment="NAME=value"
-Specifies that the string is to be added to the environment when
-logging in using this key. Environment variables set this way
-override other default environment values. Multiple options of this
-type are permitted.
-.It Cm no-port-forwarding
-Forbids TCP/IP forwarding when this key is used for authentication.
-Any port forward requests by the client will return an error. This
-might be used, e.g., in connection with the
-.Cm command
-option.
-.It Cm no-X11-forwarding
-Forbids X11 forwarding when this key is used for authentication.
-Any X11 forward requests by the client will return an error.
-.It Cm no-agent-forwarding
-Forbids authentication agent forwarding when this key is used for
-authentication.
-.It Cm no-pty
-Prevents tty allocation (a request to allocate a pty will fail).
-.El
-.Ss Examples
-1024 33 12121.\|.\|.\|312314325 ylo@foo.bar
-.Pp
-from="*.niksula.hut.fi,!pc.niksula.hut.fi" 1024 35 23.\|.\|.\|2334 ylo@niksula
-.Pp
-command="dump /home",no-pty,no-port-forwarding 1024 33 23.\|.\|.\|2323 backup.hut.fi
-.Sh SSH_KNOWN_HOSTS FILE FORMAT
-The
-.Pa /etc/openssh/ssh_known_hosts
-and
-.Pa $HOME/.ssh/known_hosts
-files contain host public keys for all known hosts. The global file should
-be prepared by the admistrator (optional), and the per-user file is
-maintained automatically: whenever the user connects an unknown host
-its key is added to the per-user file.
-.Pp
-Each line in these files contains the following fields: hostnames,
-bits, exponent, modulus, comment. The fields are separated by spaces.
-.Pp
-Hostnames is a comma-separated list of patterns ('*' and '?' act as
-wildcards); each pattern in turn is matched against the canonical host
-name (when authenticating a client) or against the user-supplied
-name (when authenticating a server). A pattern may also be preceded
-by
-.Ql !
-to indicate negation: if the host name matches a negated
-pattern, it is not accepted (by that line) even if it matched another
-pattern on the line.
-.Pp
-Bits, exponent, and modulus are taken directly from the host key; they
-can be obtained, e.g., from
-.Pa /etc/openssh/ssh_host_key.pub .
-The optional comment field continues to the end of the line, and is not used.
-.Pp
-Lines starting with
-.Ql #
-and empty lines are ignored as comments.
-.Pp
-When performing host authentication, authentication is accepted if any
-matching line has the proper key. It is thus permissible (but not
-recommended) to have several lines or different host keys for the same
-names. This will inevitably happen when short forms of host names
-from different domains are put in the file. It is possible
-that the files contain conflicting information; authentication is
-accepted if valid information can be found from either file.
-.Pp
-Note that the lines in these files are typically hundreds of characters
-long, and you definitely don't want to type in the host keys by hand.
-Rather, generate them by a script
-or by taking
-.Pa /etc/openssh/ssh_host_key.pub
-and adding the host names at the front.
-.Ss Examples
-closenet,closenet.hut.fi,.\|.\|.\|,130.233.208.41 1024 37 159.\|.\|.93 closenet.hut.fi
-.Sh FILES
-.Bl -tag -width Ds
-.It Pa /etc/openssh/sshd_config
-Contains configuration data for
-.Nm sshd .
-This file should be writable by root only, but it is recommended
-(though not necessary) that it be world-readable.
-.It Pa /etc/openssh/ssh_host_key
-Contains the private part of the host key.
-This file should only be owned by root, readable only by root, and not
-accessible to others.
-Note that
-.Nm
-does not start if this file is group/world-accessible.
-.It Pa /etc/openssh/ssh_host_key.pub
-Contains the public part of the host key.
-This file should be world-readable but writable only by
-root. Its contents should match the private part. This file is not
-really used for anything; it is only provided for the convenience of
-the user so its contents can be copied to known hosts files.
-These two files are created using
-.Xr ssh-keygen 1 .
-.It Pa /var/run/sshd.pid
-Contains the process ID of the
-.Nm
-listening for connections (if there are several daemons running
-concurrently for different ports, this contains the pid of the one
-started last). The contents of this file are not sensitive; it can be
-world-readable.
-.It Pa $HOME/.ssh/authorized_keys
-Lists the RSA keys that can be used to log into the user's account.
-This file must be readable by root (which may on some machines imply
-it being world-readable if the user's home directory resides on an NFS
-volume). It is recommended that it not be accessible by others. The
-format of this file is described above.
-.It Pa /etc/openssh/ssh_known_hosts
-This file is consulted when using rhosts with RSA host
-authentication to check the public key of the host. The key must be
-listed in this file to be accepted.
-.It Pa $HOME/.ssh/known_hosts
-The client uses this file
-and
-.Pa /etc/openssh/ssh_known_hosts
-to verify that the remote host is the one we intended to
-connect. These files should be writable only by root/the owner.
-.Pa /etc/openssh/ssh_known_hosts
-should be world-readable, and
-.Pa $HOME/.ssh/known_hosts
-can but need not be world-readable.
-.It Pa /etc/nologin
-If this file exists,
-.Nm
-refuses to let anyone except root log in. The contents of the file
-are displayed to anyone trying to log in, and non-root connections are
-refused. The file should be world-readable.
-.It Pa /etc/hosts.allow, /etc/hosts.deny
-If compiled with
-.Sy LIBWRAP
-support, tcp-wrappers access controls may be defined here as described in
-.Xr hosts_access 5 .
-.It Pa $HOME/.rhosts
-This file contains host-username pairs, separated by a space, one per
-line. The given user on the corresponding host is permitted to log in
-without password. The same file is used by rlogind and rshd.
-The file must
-be writable only by the user; it is recommended that it not be
-accessible by others.
-.Pp
-If is also possible to use netgroups in the file. Either host or user
-name may be of the form +@groupname to specify all hosts or all users
-in the group.
-.It Pa $HOME/.shosts
-For ssh,
-this file is exactly the same as for
-.Pa .rhosts .
-However, this file is
-not used by rlogin and rshd, so using this permits access using SSH only.
-.Pa /etc/hosts.equiv
-This file is used during
-.Pa .rhosts
-authentication. In the
-simplest form, this file contains host names, one per line. Users on
-those hosts are permitted to log in without a password, provided they
-have the same user name on both machines. The host name may also be
-followed by a user name; such users are permitted to log in as
-.Em any
-user on this machine (except root). Additionally, the syntax
-.Dq +@group
-can be used to specify netgroups. Negated entries start with
-.Ql \&- .
-.Pp
-If the client host/user is successfully matched in this file, login is
-automatically permitted provided the client and server user names are the
-same. Additionally, successful RSA host authentication is normally
-required. This file must be writable only by root; it is recommended
-that it be world-readable.
-.Pp
-.Sy "Warning: It is almost never a good idea to use user names in"
-.Pa hosts.equiv .
-Beware that it really means that the named user(s) can log in as
-.Em anybody ,
-which includes bin, daemon, adm, and other accounts that own critical
-binaries and directories. Using a user name practically grants the
-user root access. The only valid use for user names that I can think
-of is in negative entries.
-.Pp
-Note that this warning also applies to rsh/rlogin.
-.It Pa /etc/openssh/shosts.equiv
-This is processed exactly as
-.Pa /etc/hosts.equiv .
-However, this file may be useful in environments that want to run both
-rsh/rlogin and ssh.
-.It Pa $HOME/.ssh/environment
-This file is read into the environment at login (if it exists). It
-can only contain empty lines, comment lines (that start with
-.Ql # ) ,
-and assignment lines of the form name=value. The file should be writable
-only by the user; it need not be readable by anyone else.
-.It Pa $HOME/.ssh/rc
-If this file exists, it is run with /bin/sh after reading the
-environment files but before starting the user's shell or command. If
-X11 spoofing is in use, this will receive the "proto cookie" pair in
-standard input (and
-.Ev DISPLAY
-in environment). This must call
-.Xr xauth 1
-in that case.
-.Pp
-The primary purpose of this file is to run any initialization routines
-which may be needed before the user's home directory becomes
-accessible; AFS is a particular example of such an environment.
-.Pp
-This file will probably contain some initialization code followed by
-something similar to: "if read proto cookie; then echo add $DISPLAY
-$proto $cookie | xauth -q -; fi".
-.Pp
-If this file does not exist,
-.Pa /etc/openssh/sshrc
-is run, and if that
-does not exist either, xauth is used to store the cookie.
-.Pp
-This file should be writable only by the user, and need not be
-readable by anyone else.
-.It Pa /etc/openssh/sshrc
-Like
-.Pa $HOME/.ssh/rc .
-This can be used to specify
-machine-specific login-time initializations globally. This file
-should be writable only by root, and should be world-readable.
-.Sh AUTHOR
-Tatu Ylonen <ylo@cs.hut.fi>
-.Pp
-Information about new releases, mailing lists, and other related
-issues can be found from the SSH WWW home page:
-.Pp
-.Dl http://www.cs.hut.fi/ssh.
-.Pp
-OpenSSH
-is a derivative of the original (free) ssh 1.2.12 release, but with bugs
-removed and newer features re-added. Rapidly after the 1.2.12 release,
-newer versions bore successively more restrictive licenses. This version
-of OpenSSH
-.Bl -bullet
-.It
-has all components of a restrictive nature (ie. patents, see
-.Xr ssl 8 )
-directly removed from the source code; any licensed or patented components
-are chosen from
-external libraries.
-.It
-has been updated to support ssh protocol 1.5.
-.It
-contains added support for
-.Xr kerberos 8
-authentication and ticket passing.
-.It
-supports one-time password authentication with
-.Xr skey 1 .
-.El
-.Pp
-The libraries described in
-.Xr ssl 8
-are required for proper operation.
-.Sh SEE ALSO
-.Xr rlogin 1 ,
-.Xr rsh 1 ,
-.Xr scp 1 ,
-.Xr ssh 1 ,
-.Xr ssh-add 1 ,
-.Xr ssh-agent 1 ,
-.Xr ssh-keygen 1 ,
-.Xr ssl 8
diff --git a/opensshd.init b/opensshd.init
index 4c9c806d..40cc92b8 100755
--- a/opensshd.init
+++ b/opensshd.init
@@ -5,12 +5,12 @@
# chkconfig: 2345 55 25
# description: OpenSSH server daemon
#
-# processname: opensshd
-# config: /etc/openssh/ssh_host_key
-# config: /etc/openssh/ssh_host_key.pub
-# config: /etc/openssh/ssh_random_seed
-# config: /etc/openssh/sshd_config
-# pidfile: /var/run/opensshd.pid
+# processname: sshd
+# config: /etc/ssh/ssh_host_key
+# config: /etc/ssh/ssh_host_key.pub
+# config: /etc/ssh/ssh_random_seed
+# config: /etc/ssh/sshd_config
+# pidfile: /var/run/sshd.pid
# source function library
. /etc/rc.d/init.d/functions
@@ -19,14 +19,14 @@ RETVAL=0
case "$1" in
start)
- echo -n "Starting opensshd: "
- daemon /usr/sbin/opensshd
+ echo -n "Starting sshd: "
+ daemon /usr/sbin/sshd
RETVAL=$?
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/sshd
echo
;;
stop)
- echo -n "Shutting down opensshd: "
+ echo -n "Shutting down sshd: "
killproc sshd
RETVAL=$?
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/sshd
@@ -38,11 +38,11 @@ case "$1" in
RETVAL=$?
;;
status)
- status opensshd
+ status sshd
RETVAL=$?
;;
*)
- echo "Usage: opensshd {start|stop|restart|status}"
+ echo "Usage: sshd {start|stop|restart|status}"
exit 1
esac
diff --git a/ssh.h b/ssh.h
index 247e45cc..8526aa11 100644
--- a/ssh.h
+++ b/ssh.h
@@ -13,7 +13,7 @@ Generic header file for ssh.
*/
-/* RCSID("$Id: ssh.h,v 1.3 1999/10/28 04:34:49 damien Exp $"); */
+/* RCSID("$Id: ssh.h,v 1.4 1999/10/28 23:18:29 damien Exp $"); */
#ifndef SSH_H
#define SSH_H
@@ -89,7 +89,7 @@ only by root, whereas ssh_config should be world-readable. */
/* The process id of the daemon listening for connections is saved
here to make it easier to kill the correct daemon when necessary. */
-#define SSH_DAEMON_PID_FILE PIDDIR "/opensshd.pid"
+#define SSH_DAEMON_PID_FILE PIDDIR "/sshd.pid"
/* The directory in user\'s home directory in which the files reside.
The directory should be world-readable (though not all files are). */
diff --git a/sshd.c b/sshd.c
index ce834e8d..103ca3fb 100644
--- a/sshd.c
+++ b/sshd.c
@@ -18,7 +18,7 @@ agent connections.
*/
#include "includes.h"
-RCSID("$Id: sshd.c,v 1.4 1999/10/28 04:03:14 damien Exp $");
+RCSID("$Id: sshd.c,v 1.5 1999/10/28 23:18:29 damien Exp $");
#include "xmalloc.h"
#include "rsa.h"
@@ -1136,7 +1136,7 @@ do_authentication(char *user, int privileged_port)
pw = &pwcopy;
#ifdef HAVE_LIBPAM
- if (PAM_SUCCESS != pam_start("opensshd", pw->pw_name, &conv, (pam_handle_t**)&pamh))
+ if (PAM_SUCCESS != pam_start("sshd", pw->pw_name, &conv, (pam_handle_t**)&pamh))
{
packet_start(SSH_SMSG_FAILURE);
packet_send();
diff --git a/sshd_config b/sshd_config
index 63a55990..97f6f8e1 100644
--- a/sshd_config
+++ b/sshd_config
@@ -2,7 +2,7 @@
Port 22
ListenAddress 0.0.0.0
-HostKey /etc/openssh/ssh_host_key
+HostKey /etc/ssh/ssh_host_key
ServerKeyBits 768
LoginGraceTime 600
KeyRegenerationInterval 3600
@@ -20,7 +20,7 @@ KeepAlive yes
SyslogFacility AUTH
RhostsAuthentication no
#
-# For this to work you will also need host keys in /etc/openssh/ssh_known_hosts
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
RhostsRSAAuthentication no
#
RSAAuthentication yes
View Lorry Controller Status