Removes tinyipa from IPA

Change-Id: I56f7c9abdae1f406de1e086fdc0cac8bebca0e3c
Task: 33745
Story: 2005114

23 files changed, 0 insertions, 1281 deletions

diff --git a/imagebuild/README.rst b/imagebuild/README.rst
index 94347c2f..be1c88f3 100644
--- a/imagebuild/README.rst
+++ b/imagebuild/README.rst
@@ -4,5 +4,3 @@ ironic-python-agent images
 coreos - Builds a CoreOS Ramdisk and Kernel suitable for running
 ironic-python-agent
 
-tinyipa - Builds a TinyCoreLinux Ramdisk and Kernel suitable for running
-ironic-python-agent
diff --git a/imagebuild/tinyipa/.gitignore b/imagebuild/tinyipa/.gitignore
deleted file mode 100644
index 1e6b193f..00000000
--- a/imagebuild/tinyipa/.gitignore
+++ /dev/null
@@ -1,13 +0,0 @@
-*.gz
-*.zip
-*.tar.gz
-tinyipabuild
-tinyipafinal
-*.vmlinuz
-vmlinuz64
-*.sha256
-*.iso
-*.tcz*
-squashfs-root
-syslinux*
-newiso
diff --git a/imagebuild/tinyipa/Makefile b/imagebuild/tinyipa/Makefile
deleted file mode 100644
index ad0bf47b..00000000
--- a/imagebuild/tinyipa/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-.PHONY: default all dependencies build finalise addssh iso clean clean_build clean_iso
-default: dependencies build finalise instance-images
-
-all: dependencies build finalise iso instance-images
-
-dependencies:
-	./install-deps.sh
-
-build:
-	./build-tinyipa.sh
-
-finalise:
-	./finalise-tinyipa.sh
-
-addssh:
-	./add-ssh-tinyipa.sh
-
-iso:
-	./build-iso.sh
-
-instance-images:
-	./build-instance-images.sh
-
-clean: clean_build clean_iso
-
-clean_build:
-	sudo -v
-	sudo rm -rf tinyipabuild
-	sudo rm -rf tinyipafinal
-	sudo rm -rf tinyipaaddssh
-	rm -f *tinyipa*.vmlinuz
-	rm -f *tinyipa*.gz
-	rm -f *tinyipa*.sha256
-	rm -f build_files/corepure64.gz
-	rm -f build_files/vmlinuz64
-	rm -f build_files/*.tcz
-	rm -f build_files/*.tcz.*
-	rm -f tiny-instance-part*.img
-	rm -f tiny-instance-uec*.tar.gz
-
-clean_iso:
-	rm -rf newiso
-	rm -f build_files/syslinux-4.06.tar.gz
-	rm -rf build_files/syslinux-4.06
-	rm -f tinyipa.iso
diff --git a/imagebuild/tinyipa/README.rst b/imagebuild/tinyipa/README.rst
deleted file mode 100644
index 90a13e66..00000000
--- a/imagebuild/tinyipa/README.rst
+++ /dev/null
@@ -1,146 +0,0 @@
-=============================
-Tiny Core Ironic Python Agent
-=============================
-
-Build script requirements
--------------------------
-For the main build script:
-
-* wget
-* pip
-* unzip
-* sudo
-* awk
-* mksquashfs
-
-For building an ISO you'll also need:
-
-* genisoimage
-
-Instructions:
--------------
-To create a new ramdisk, run::
-
-  make
-
-or::
-
-  ./build-tinyipa.sh && ./finalise-tinyipa.sh
-
-This will create two new files once completed:
-
-* tinyipa.vmlinuz
-* tinyipa.gz
-
-These are your two files to upload to glance for use with Ironic.
-
-Building an ISO from a previous make run:
------------------------------------------
-Once you've built tinyipa it is possible to pack it into an ISO if required. To
-create a bootable ISO, run::
-
-  make iso
-
-or::
-
-./build-iso.sh
-
-This will create one new file once completed:
-
-* tinyipa.iso
-
-To build a fresh ramdisk and build an iso from it:
---------------------------------------------------
-Run::
-
-  make all
-
-To clean up the whole build environment run:
---------------------------------------------
-Run::
-
-  make clean
-
-For cleaning up just the iso or just the ramdisk build::
-
-  make clean_iso
-
-or::
-
-  make clean_build
-
-Advanced options
-----------------
-
-(De)Optimizing the image
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-If you want the build script to preinstall everything into the ramdisk,
-instead of loading some things at runtime (this results in a slightly bigger
-ramdisk), before running make or build-tinyipa.sh run::
-
-  export BUILD_AND_INSTALL_TINYIPA=true
-
-By default, building TinyIPA will compile most of the Python code to
-optimized ``*.pyo`` files, completely remove most of ``*.py`` and ``*.pyc``
-files, and run ironic-python-agent with ``PYTHONOPTIMIZE=1``
-to save space on the ramdisk.
-If instead you want a normal Python experience inside the image,
-for example for debugging/hacking on IPA in a running ramdisk,
-before running make or build-tinyipa.sh run::
-
-    export PYOPTIMIZE_TINYIPA=false
-
-
-Enabling/disabling SSH access to the ramdisk
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-By default tinyipa will be built with OpenSSH server installed but no
-public SSH keys authorized to access it.
-
-If you want to enable SSH access to the image, set ``AUTHORIZE_SSH`` variable
-in your shell before building the tinyipa::
-
-  export AUTHORIZE_SSH=true
-
-By default it will use public RSA or DSA keys of the user running the build.
-To provide other public SSH key, export path to it in your shell before
-building tinyipa as follows::
-
-  export SSH_PUBLIC_KEY=<full-path-to-public-key>
-
-If you want to disable SSH altogether, set ``INSTALL_SSH`` variable in your
-shell to ``false`` before building the tinyipa::
-
-    export INSTALL_SSH=false
-
-You can also rebuild an already built tinyipa image by using ``addssh`` make
-tagret::
-
-    make addssh
-
-This will fetch the pre-built tinyipa image from "tarballs.openstack.org"
-using the version specified as ``BRANCH_NAME`` shell variable as described
-above, or it may use an already downloaded ramdisk image if path to it is set
-as ``TINYIPA_RAMDISK_FILE`` shell variable before running this make target.
-It will install and configure OpenSSH if needed and add public SSH keys for
-``tc`` user using the same ``SSH_PUBLIC_KEY`` shell variable as described
-above.
-
-Enabling biosdevname in the ramdisk
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-If you want to collect BIOS given names of NICs in the inventory, set
-``TINYIPA_REQUIRE_BIOSDEVNAME`` variable in your shell before building the
-tinyipa::
-
-  export TINYIPA_REQUIRE_BIOSDEVNAME=true
-
-Using ironic-lib from source
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-`ironic-lib <https://opendev.org/openstack/ironic-lib>`_ contains
-important parts of the provisioning logic. If you need to build an IPA image
-with your local checkout of `ironic-lib`, export the following variable::
-
-  export IRONIC_LIB_SOURCE=/absolute/path/to/ironic-lib/checkout
diff --git a/imagebuild/tinyipa/add-ssh-tinyipa.sh b/imagebuild/tinyipa/add-ssh-tinyipa.sh
deleted file mode 100755
index c1372e0a..00000000
--- a/imagebuild/tinyipa/add-ssh-tinyipa.sh
+++ /dev/null
@@ -1,139 +0,0 @@
-#!/bin/bash
-
-# Rebuild upstream pre-built tinyipa it to be usable with ansible-deploy.
-#
-# Downloads the pre-built tinyipa ramdisk from tarballs.openstack.org or
-# rebuilds a ramdisk under path set as TINYIPA_RAMDISK_FILE shell var.
-
-# During rebuild this script installs and configures OpenSSH server if needed
-# and makes required changes for Ansible + Python to work in compiled/optimized
-# Python environment.
-#
-# By default, id_rsa or id_dsa keys  of the user performing the build
-# are baked into the image as authorized_keys for 'tc' user.
-# To supply different public ssh key, befor running this script set
-# SSH_PUBLIC_KEY environment variable to point to absolute path to the key.
-#
-# This script produces "ansible-<tinyipa-ramdisk-name>" ramdisk that can serve
-# as ramdisk for both ansible-deploy driver and agent-based Ironic drivers,
-
-set -ex
-WORKDIR=$(readlink -f $0 | xargs dirname)
-REBUILDDIR="$WORKDIR/tinyipaaddssh"
-DST_DIR=$REBUILDDIR
-source ${WORKDIR}/common.sh
-
-TINYCORE_MIRROR_URL=${TINYCORE_MIRROR_URL:-}
-BRANCH_PATH=${BRANCH_PATH:-master}
-TINYIPA_RAMDISK_FILE=${TINYIPA_RAMDISK_FILE:-}
-
-SSH_PUBLIC_KEY=${SSH_PUBLIC_KEY:-}
-
-function validate_params {
-    echo "Validating location of public SSH key"
-    if [ -n "$SSH_PUBLIC_KEY" ]; then
-        if [ -r "$SSH_PUBLIC_KEY" ]; then
-            _found_ssh_key="$SSH_PUBLIC_KEY"
-        fi
-    else
-        for fmt in rsa dsa; do
-            if [ -r "$HOME/.ssh/id_$fmt.pub" ]; then
-                _found_ssh_key="$HOME/.ssh/id_$fmt.pub"
-                break
-            fi
-        done
-    fi
-
-    if [ -z $_found_ssh_key ]; then
-        echo "Failed to find neither provided nor default SSH key"
-        exit 1
-    fi
-}
-
-function get_tinyipa {
-    if [ -z $TINYIPA_RAMDISK_FILE ]; then
-        mkdir -p $WORKDIR/build_files/cache
-        cd $WORKDIR/build_files/cache
-        wget -N https://tarballs.openstack.org/ironic-python-agent/tinyipa/files/tinyipa${BRANCH_EXT}.gz
-        TINYIPA_RAMDISK_FILE="$WORKDIR/build_files/cache/tinyipa${BRANCH_EXT}.gz"
-    fi
-}
-
-function unpack_ramdisk {
-
-    if [ -d "$REBUILDDIR" ]; then
-        sudo rm -rf "$REBUILDDIR"
-    fi
-
-    mkdir -p "$REBUILDDIR"
-
-    # Extract rootfs from .gz file
-    ( cd "$REBUILDDIR" && zcat "$TINYIPA_RAMDISK_FILE" | sudo cpio -i -H newc -d )
-
-}
-
-function install_ssh {
-    if [ ! -f "$REBUILDDIR/usr/local/etc/ssh/sshd_config" ]; then
-        # tinyipa was built without SSH server installed
-        # Install and configure bare minimum for SSH access
-        $TC_CHROOT_CMD tce-load -wic openssh
-        # Configure OpenSSH
-        $CHROOT_CMD cp /usr/local/etc/ssh/sshd_config.orig /usr/local/etc/ssh/sshd_config
-        echo "PasswordAuthentication no" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-        # Generate and configure host keys - RSA, DSA, Ed25519
-        # NOTE(pas-ha) ECDSA host key will still be re-generated fresh on every image boot
-        $CHROOT_CMD ssh-keygen -q -t rsa -N "" -f /usr/local/etc/ssh/ssh_host_rsa_key
-        $CHROOT_CMD ssh-keygen -q -t dsa -N "" -f /usr/local/etc/ssh/ssh_host_dsa_key
-        $CHROOT_CMD ssh-keygen -q -t ed25519 -N "" -f /usr/local/etc/ssh/ssh_host_ed25519_key
-        echo "HostKey /usr/local/etc/ssh/ssh_host_rsa_key" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-        echo "HostKey /usr/local/etc/ssh/ssh_host_dsa_key" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-        echo "HostKey /usr/local/etc/ssh/ssh_host_ed25519_key" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-    fi
-
-    # setup new user SSH keys anyway
-    $CHROOT_CMD mkdir -p /home/tc
-    $CHROOT_CMD chown -R tc.staff /home/tc
-    $TC_CHROOT_CMD mkdir -p /home/tc/.ssh
-    cat $_found_ssh_key | $TC_CHROOT_CMD tee /home/tc/.ssh/authorized_keys
-    $CHROOT_CMD chown tc.staff /home/tc/.ssh/authorized_keys
-    $TC_CHROOT_CMD chmod 600 /home/tc/.ssh/authorized_keys
-}
-
-function fix_python_optimize {
-    if grep -q "PYTHONOPTIMIZE=1" "$REBUILDDIR/opt/bootlocal.sh"; then
-        # tinyipa was built with optimized Python environment, apply fixes
-        echo "PYTHONOPTIMIZE=1" | $TC_CHROOT_CMD tee -a /home/tc/.ssh/environment
-        echo "PermitUserEnvironment yes" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-        echo 'Defaults env_keep += "PYTHONOPTIMIZE"' | $CHROOT_CMD tee -a /etc/sudoers
-    fi
-}
-
-
-function rebuild_ramdisk {
-    # Rebuild build directory into gz file
-    ansible_basename="ansible-$(basename $TINYIPA_RAMDISK_FILE)"
-    ( cd "$REBUILDDIR" && sudo find | sudo cpio -o -H newc | gzip -9 > "$WORKDIR/${ansible_basename}" )
-    # Output file created by this script and its size
-    cd "$WORKDIR"
-    echo "Produced files:"
-    du -h "${ansible_basename}"
-}
-
-sudo -v
-
-
-validate_params
-get_tinyipa
-unpack_ramdisk
-setup_tce "$DST_DIR"
-
-# NOTE (pas-ha) default tinyipa is built without SSH access, enable it here
-install_ssh
-# NOTE(pas-ha) default tinyipa is built with PYOPTIMIZE_TINYIPA=true and
-# for Ansible+python to work we need to ensure that PYTHONOPTIMIZE=1 is
-# set for all sessions from 'tc' user including those that are escalated
-# with 'sudo' afterwards
-fix_python_optimize
-
-cleanup_tce "$DST_DIR"
-rebuild_ramdisk
diff --git a/imagebuild/tinyipa/build-instance-images.sh b/imagebuild/tinyipa/build-instance-images.sh
deleted file mode 100755
index 12037716..00000000
--- a/imagebuild/tinyipa/build-instance-images.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-set -ex
-WORKDIR=$(readlink -f $0 | xargs dirname)
-DST_DIR=$(mktemp -d)
-source ${WORKDIR}/common.sh
-PARTIMG="$WORKDIR/tiny-instance-part${BRANCH_EXT}.img"
-UECFILE="$WORKDIR/tiny-instance-uec${BRANCH_EXT}.tar.gz"
-fs_type='ext4'
-
-sudo rm -rf $PARTIMG $UECFILE
-sudo truncate --size=150M $PARTIMG
-
-sudo mkfs."${fs_type}" -F "$PARTIMG" -L "root"
-sudo mount -o loop "$PARTIMG" "$DST_DIR/"
-
-# Extract rootfs from .gz file
-( cd "$DST_DIR" && zcat $WORKDIR/build_files/corepure64.gz | sudo cpio -i -H newc -d )
-
-setup_tce $DST_DIR
-
-$TC_CHROOT_CMD tce-load -wci grub2-multi.tcz
-
-cleanup_tce $DST_DIR
-sudo umount $DST_DIR/
-
-pushd $DST_DIR/
-cp $WORKDIR/tinyipa${BRANCH_EXT}.gz $DST_DIR/tinyipa-initrd
-cp $WORKDIR/tinyipa${BRANCH_EXT}.vmlinuz $DST_DIR/tinyipa-vmlinuz
-cp $PARTIMG $DST_DIR/
-
-tar -czf $UECFILE ./
-
-popd
-
-sudo rm -rf $DST_DIR
diff --git a/imagebuild/tinyipa/build-iso.sh b/imagebuild/tinyipa/build-iso.sh
deleted file mode 100755
index be0db458..00000000
--- a/imagebuild/tinyipa/build-iso.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-set -ex
-WORKDIR=$(readlink -f $0 | xargs dirname)
-
-cd $WORKDIR/build_files
-wget -N https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-4.06.tar.gz && tar zxf syslinux-4.06.tar.gz
-
-cd $WORKDIR
-rm -rf newiso
-mkdir -p newiso/boot/isolinux
-cp build_files/syslinux-4.06/core/isolinux.bin newiso/boot/isolinux/.
-cp build_files/isolinux.cfg newiso/boot/isolinux/.
-cp tinyipa.gz newiso/boot/corepure64.gz
-cp tinyipa.vmlinuz newiso/boot/vmlinuz64
-genisoimage -l -r -J -R -V TC-custom -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -o tinyipa.iso newiso
diff --git a/imagebuild/tinyipa/build-tinyipa.sh b/imagebuild/tinyipa/build-tinyipa.sh
deleted file mode 100755
index f2f8da65..00000000
--- a/imagebuild/tinyipa/build-tinyipa.sh
+++ /dev/null
@@ -1,197 +0,0 @@
-#!/bin/bash
-
-set -ex
-WORKDIR=$(readlink -f $0 | xargs dirname)
-source ${WORKDIR}/tc-mirror.sh
-BUILDDIR="$WORKDIR/tinyipabuild"
-BUILD_AND_INSTALL_TINYIPA=${BUILD_AND_INSTALL_TINYIPA:-false}
-TINYCORE_MIRROR_URL=${TINYCORE_MIRROR_URL:-}
-TINYIPA_REQUIRE_BIOSDEVNAME=${TINYIPA_REQUIRE_BIOSDEVNAME:-false}
-TINYIPA_REQUIRE_IPMITOOL=${TINYIPA_REQUIRE_IPMITOOL:-true}
-IRONIC_LIB_SOURCE=${IRONIC_LIB_SOURCE:-}
-USE_PYTHON3=${USE_PYTHON3:-True}
-
-CHROOT_PATH="/tmp/overides:/usr/local/sbin:/usr/local/bin:/apps/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-CHROOT_CMD="sudo chroot $BUILDDIR /usr/bin/env -i PATH=$CHROOT_PATH http_proxy=$http_proxy https_proxy=$https_proxy no_proxy=$no_proxy"
-
-TC=1001
-STAFF=50
-
-# NOTE(moshele): Git < 1.7.10 requires a separate checkout, see LP #1590912
-function clone_and_checkout {
-    git clone $1 $2 --depth=1 --branch $3; cd $2; git checkout $3; cd -
-}
-
-echo "Building tinyipa:"
-
-# Ensure we have an extended sudo to prevent the need to enter a password over
-# and over again.
-sudo -v
-
-# If an old build directory exists remove it
-if [ -d "$BUILDDIR" ]; then
-    sudo rm -rf "$BUILDDIR"
-fi
-
-##############################################
-# Download and Cache Tiny Core Files
-##############################################
-
-# Find a working TC mirror if none is explicitly provided
-choose_tc_mirror
-
-cd $WORKDIR/build_files
-wget -N $TINYCORE_MIRROR_URL/8.x/x86_64/release/distribution_files/corepure64.gz
-wget -N $TINYCORE_MIRROR_URL/8.x/x86_64/release/distribution_files/vmlinuz64
-cd $WORKDIR
-
-########################################################
-# Build Required Python Dependecies in a Build Directory
-########################################################
-
-# Make directory for building in
-mkdir "$BUILDDIR"
-
-# Extract rootfs from .gz file
-( cd "$BUILDDIR" && zcat $WORKDIR/build_files/corepure64.gz | sudo cpio -i -H newc -d )
-
-# Configure mirror
-sudo sh -c "echo $TINYCORE_MIRROR_URL > $BUILDDIR/opt/tcemirror"
-
-# Download TGT, Qemu-utils, Biosdevname and IPMItool source
-clone_and_checkout "https://github.com/fujita/tgt.git" "${BUILDDIR}/tmp/tgt" "v1.0.62"
-clone_and_checkout "https://github.com/qemu/qemu.git" "${BUILDDIR}/tmp/qemu" "v2.5.0"
-clone_and_checkout "https://github.com/lyonel/lshw.git" "${BUILDDIR}/tmp/lshw" "B.02.18"
-if $TINYIPA_REQUIRE_BIOSDEVNAME; then
-    wget -N -O - https://linux.dell.com/biosdevname/biosdevname-0.7.2/biosdevname-0.7.2.tar.gz | tar -xz -C "${BUILDDIR}/tmp" -f -
-fi
-if $TINYIPA_REQUIRE_IPMITOOL; then
-    wget -N -O - https://github.com/ipmitool/ipmitool/archive/IPMITOOL_1_8_18.tar.gz | tar -xz -C "${BUILDDIR}/tmp" -f -
-fi
-
-# Create directory for python local mirror
-mkdir -p "$BUILDDIR/tmp/localpip"
-
-# Download IPA and requirements
-cd ../..
-rm -rf *.egg-info
-pwd
-python setup.py sdist --dist-dir "$BUILDDIR/tmp/localpip" --quiet
-ls $BUILDDIR/tmp/localpip || true
-cp requirements.txt $BUILDDIR/tmp/ipa-requirements.txt
-
-if [ -n "$IRONIC_LIB_SOURCE" ]; then
-    pushd $IRONIC_LIB_SOURCE
-    rm -rf *.egg-info
-    python setup.py sdist --dist-dir "$BUILDDIR/tmp/localpip" --quiet
-    cp requirements.txt $BUILDDIR/tmp/ironic-lib-requirements.txt
-    popd
-fi
-
-imagebuild/common/generate_upper_constraints.sh upper-constraints.txt
-if [ -n "$IRONIC_LIB_SOURCE" ]; then
-    sed -i '/ironic-lib/d' upper-constraints.txt $BUILDDIR/tmp/ipa-requirements.txt
-fi
-cp upper-constraints.txt $BUILDDIR/tmp/upper-constraints.txt
-echo Using upper-constraints:
-cat upper-constraints.txt
-cd $WORKDIR
-
-sudo cp /etc/resolv.conf $BUILDDIR/etc/resolv.conf
-
-trap "sudo umount $BUILDDIR/proc; sudo umount $BUILDDIR/dev/pts" EXIT
-sudo mount --bind /proc $BUILDDIR/proc
-sudo mount --bind /dev/pts $BUILDDIR/dev/pts
-
-if [ -d /opt/stack/new ]; then
-    CI_DIR=/opt/stack/new
-elif [ -d /opt/stack ]; then
-    CI_DIR=/opt/stack
-else
-    CI_DIR=
-fi
-
-if [ -n "$CI_DIR" ]; then
-    # Running in CI environment, make checkouts available
-    $CHROOT_CMD mkdir -p $CI_DIR
-    for project in $(ls $CI_DIR); do
-        if grep -q "$project" $BUILDDIR/tmp/upper-constraints.txt &&
-            [ -d "$CI_DIR/$project/.git" ]; then
-            sudo cp -R "$CI_DIR/$project" $BUILDDIR/$CI_DIR/
-        fi
-    done
-fi
-
-$CHROOT_CMD mkdir /etc/sysconfig/tcedir
-$CHROOT_CMD chmod a+rwx /etc/sysconfig/tcedir
-$CHROOT_CMD touch /etc/sysconfig/tcuser
-$CHROOT_CMD chmod a+rwx /etc/sysconfig/tcuser
-
-mkdir $BUILDDIR/tmp/overides
-cp $WORKDIR/build_files/fakeuname $BUILDDIR/tmp/overides/uname
-
-PY_REQS="buildreqs_python2.lst"
-if [[ $USE_PYTHON3 == "True" ]]; then
-    PY_REQS="buildreqs_python3.lst"
-fi
-
-while read line; do
-    sudo chroot --userspec=$TC:$STAFF $BUILDDIR /usr/bin/env -i PATH=$CHROOT_PATH http_proxy=$http_proxy https_proxy=$https_proxy no_proxy=$no_proxy tce-load -wci $line
-done < <(paste $WORKDIR/build_files/$PY_REQS $WORKDIR/build_files/buildreqs.lst)
-
-PIP_COMMAND="pip"
-TINYIPA_PYTHON_EXE="python"
-if [[ $USE_PYTHON3 == "True" ]]; then
-    PIP_COMMAND="pip3"
-    TINYIPA_PYTHON_EXE="python3"
-fi
-
-# Build python wheels
-$CHROOT_CMD ${TINYIPA_PYTHON_EXE} -m ensurepip
-$CHROOT_CMD ${PIP_COMMAND} install --upgrade pip wheel
-$CHROOT_CMD ${PIP_COMMAND} install pbr
-$CHROOT_CMD ${PIP_COMMAND} wheel -c /tmp/upper-constraints.txt --wheel-dir /tmp/wheels -r /tmp/ipa-requirements.txt
-if [ -n "$IRONIC_LIB_SOURCE" ]; then
-    $CHROOT_CMD ${PIP_COMMAND} wheel -c /tmp/upper-constraints.txt --wheel-dir /tmp/wheels -r /tmp/ironic-lib-requirements.txt
-    $CHROOT_CMD ${PIP_COMMAND} wheel -c /tmp/upper-constraints.txt --no-index --pre --wheel-dir /tmp/wheels --find-links=/tmp/localpip --find-links=/tmp/wheels ironic-lib
-fi
-$CHROOT_CMD ${PIP_COMMAND} wheel -c /tmp/upper-constraints.txt --no-index --pre --wheel-dir /tmp/wheels --find-links=/tmp/localpip --find-links=/tmp/wheels ironic-python-agent
-echo Resulting wheels:
-ls -1 $BUILDDIR/tmp/wheels
-
-# Build tgt
-rm -rf $WORKDIR/build_files/tgt.tcz
-$CHROOT_CMD /bin/sh -c "cd /tmp/tgt && make && make install-programs install-conf install-scripts DESTDIR=/tmp/tgt-installed"
-find $BUILDDIR/tmp/tgt-installed/ -type f -executable | xargs file | awk -F ':' '/ELF/ {print $1}' | sudo xargs strip
-cd $WORKDIR/build_files && mksquashfs $BUILDDIR/tmp/tgt-installed tgt.tcz && md5sum tgt.tcz > tgt.tcz.md5.txt
-
-# Build qemu-utils
-rm -rf $WORKDIR/build_files/qemu-utils.tcz
-$CHROOT_CMD /bin/sh -c "cd /tmp/qemu && ./configure --disable-system --disable-user --disable-linux-user --disable-bsd-user --disable-guest-agent --disable-blobs && make && make install DESTDIR=/tmp/qemu-utils"
-find $BUILDDIR/tmp/qemu-utils/ -type f -executable | xargs file | awk -F ':' '/ELF/ {print $1}' | sudo xargs strip
-cd $WORKDIR/build_files && mksquashfs $BUILDDIR/tmp/qemu-utils qemu-utils.tcz && md5sum qemu-utils.tcz > qemu-utils.tcz.md5.txt
-# Create qemu-utils.tcz.dep
-echo "glib2.tcz" > qemu-utils.tcz.dep
-
-# Build lshw
-rm -rf $WORKDIR/build_files/lshw.tcz
-# NOTE(mjturek): We touch src/lshw.1 and clear src/po/Makefile to avoid building the man pages, as they aren't used and require large dependencies to build.
-$CHROOT_CMD /bin/sh -c "cd /tmp/lshw && touch src/lshw.1 && echo install: > src/po/Makefile && make && make install DESTDIR=/tmp/lshw-installed"
-find $BUILDDIR/tmp/lshw-installed/ -type f -executable | xargs file | awk -F ':' '/ELF/ {print $1}' | sudo xargs strip
-cd $WORKDIR/build_files && mksquashfs $BUILDDIR/tmp/lshw-installed lshw.tcz && md5sum lshw.tcz > lshw.tcz.md5.txt
-
-# Build biosdevname
-if $TINYIPA_REQUIRE_BIOSDEVNAME; then
-    rm -rf $WORKDIR/build_files/biosdevname.tcz
-    $CHROOT_CMD /bin/sh -c "cd /tmp/biosdevname-* && ./configure && make && make install DESTDIR=/tmp/biosdevname-installed"
-    find $BUILDDIR/tmp/biosdevname-installed/ -type f -executable | xargs file | awk -F ':' '/ELF/ {print $1}' | sudo xargs strip
-    cd $WORKDIR/build_files && mksquashfs $BUILDDIR/tmp/biosdevname-installed biosdevname.tcz && md5sum biosdevname.tcz > biosdevname.tcz.md5.txt
-fi
-
-if $TINYIPA_REQUIRE_IPMITOOL; then
-    rm -rf $WORKDIR/build_files/ipmitool.tcz
-    # NOTE(TheJulia): Explicitly add the libtool path since /usr/local/ is not in path from the chroot.
-    $CHROOT_CMD /bin/sh -c "cd /tmp/ipmitool-* && env LIBTOOL='/usr/local/bin/libtool' ./bootstrap && ./configure && make && make install DESTDIR=/tmp/ipmitool"
-    find $BUILDDIR/tmp/ipmitool/ -type f -executable | xargs file | awk -F ':' '/ELF/ {print $1}' | sudo xargs strip
-    cd $WORKDIR/build_files && mksquashfs $BUILDDIR/tmp/ipmitool ipmitool.tcz && md5sum ipmitool.tcz > ipmitool.tcz.md5.txt
-fi
diff --git a/imagebuild/tinyipa/build_files/bootlocal.sh b/imagebuild/tinyipa/build_files/bootlocal.sh
deleted file mode 100755
index 0fcf0b4f..00000000
--- a/imagebuild/tinyipa/build_files/bootlocal.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/bin/sh
-# put other system startup commands here
-
-#exec > /tmp/installlogs 2>&1
-set -x
-
-echo "Starting bootlocal script:"
-date
-
-export HOME=/root
-
-# Start SSHd
-if [ -f /usr/local/etc/init.d/openssh ]; then
-    echo "Starting OpenSSH server:"
-    /usr/local/etc/init.d/openssh start
-fi
-
-# Maybe save some RAM?
-#rm -rf /tmp/builtin
-
-# Install IPA and dependecies
-if ! type "ironic-python-agent" > /dev/null ; then
-    PIP_COMMAND="pip"
-    if hash pip3 2>/dev/null; then
-        PIP_COMMAND="pip3"
-    fi
-    $PIP_COMMAND install --no-index --find-links=file:///tmp/wheelhouse ironic_python_agent
-fi
-
-# Create ipa-rescue-config directory for rescue password
-sudo mkdir -p /etc/ipa-rescue-config
-
-export PYTHONOPTIMIZE=1
-
-# Run IPA
-echo "Starting Ironic Python Agent:"
-date
-ironic-python-agent 2>&1 | tee /var/log/ironic-python-agent.log
-
-
-create_rescue_user() {
-    crypted_pass=$(cat /etc/ipa-rescue-config/ipa-rescue-password)
-    sudo adduser rescue -D -G root # no useradd
-    echo "rescue:$crypted_pass" | sudo chpasswd -e
-    sudo sh -c "echo \"rescue ALL=(ALL) NOPASSWD: ALL\" >> /etc/sudoers" # no suooers.d in tiny core.
-
-    # Restart sshd with allowing password authentication
-    sudo sed -i -e 's/^PasswordAuthentication no/PasswordAuthentication yes/' /usr/local/etc/ssh/sshd_config
-    sudo /usr/local/etc/init.d/openssh restart
-}
-
-# Setup DHCP network
-configure_dhcp_network() {
-    for pidfile in `ls /var/run/udhcpc/*.pid`; do
-        kill `cat $pidfile`
-    done
-
-    # NOTE(TheJulia): We may need to add a short wait here as
-    # network interface plugging actions may not be asynchronous.
-    echo "Sleeping 30 sec as network interface is being updated"
-    sleep 30
-    INTERFACES=$(ip -o link |grep "LOWER_UP"|cut -f2 -d" "|sed 's/://'|grep -v "lo")
-    for interface in $INTERFACES; do
-        pidfile="/var/run/udhcpc/${interface}.pid"
-        /sbin/udhcpc -b -p ${pidfile} -i ${interface} -s /opt/udhcpc.script >> /var/log/udhcpc.log 2>&1
-    done
-}
-
-if [ -f /etc/ipa-rescue-config/ipa-rescue-password ]; then
-    create_rescue_user || exit 0
-    configure_dhcp_network || exit 0
-else
-    echo "IPA has exited. No rescue password file was defined."
-fi
diff --git a/imagebuild/tinyipa/build_files/buildreqs.lst b/imagebuild/tinyipa/build_files/buildreqs.lst
deleted file mode 100644
index 134c0efd..00000000
--- a/imagebuild/tinyipa/build_files/buildreqs.lst
+++ /dev/null
@@ -1,26 +0,0 @@
-autoconf.tcz
-autogen-dev.tcz
-autogen.tcz
-automake.tcz
-bash.tcz
-binutils.tcz
-compiletc.tcz
-coreutils.tcz
-dmidecode.tcz
-gdisk.tcz
-git.tcz
-glib2-dev.tcz
-hdparm.tcz
-libpci-dev.tcz
-libtool-dev.tcz
-libtool.tcz
-parted.tcz
-pciutils.tcz
-pixman-dev.tcz
-pkg-config.tcz
-raid-dm-4.8.17-tinycore64.tcz
-scsi-4.8.17-tinycore64.tcz
-ipv6-4.8.17-tinycore64.tcz
-udev-lib.tcz
-util-linux.tcz
-zlib_base-dev.tcz
diff --git a/imagebuild/tinyipa/build_files/buildreqs_python2.lst b/imagebuild/tinyipa/build_files/buildreqs_python2.lst
deleted file mode 100644
index cc754924..00000000
--- a/imagebuild/tinyipa/build_files/buildreqs_python2.lst
+++ /dev/null
@@ -1,2 +0,0 @@
-python.tcz
-python-dev.tcz
\ No newline at end of file
diff --git a/imagebuild/tinyipa/build_files/buildreqs_python3.lst b/imagebuild/tinyipa/build_files/buildreqs_python3.lst
deleted file mode 100644
index 1b6b0c00..00000000
--- a/imagebuild/tinyipa/build_files/buildreqs_python3.lst
+++ /dev/null
@@ -1,2 +0,0 @@
-python3.6.tcz
-python3.6-dev.tcz
\ No newline at end of file
diff --git a/imagebuild/tinyipa/build_files/dhcp.sh b/imagebuild/tinyipa/build_files/dhcp.sh
deleted file mode 100644
index 8383f262..00000000
--- a/imagebuild/tinyipa/build_files/dhcp.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-# The DHCP portion is now separated out, in order to not slow the boot down
-# only to wait for slow network cards
-. /etc/init.d/tc-functions
-
-# This waits until all devices have registered
-/sbin/udevadm settle --timeout=%UDEV_SETTLE_TIMEOUT%
-
-NETDEVICES="$(awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null)"
-echo "$0: Discovered network devices: $NETDEVICES"
-for DEVICE in $NETDEVICES; do
-  ifconfig $DEVICE | grep -q "inet addr"
-  if [ "$?" != 0 ]; then
-    echo -e "\nNetwork device $DEVICE detected, DHCP broadcasting for IP."
-    trap 2 3 11
-    /sbin/udhcpc -b -i $DEVICE -x hostname:$(/bin/hostname) -p /var/run/udhcpc.$DEVICE.pid 2>&1 &
-    trap "" 2 3 11
-    sleep 1
-  fi
-done
-
diff --git a/imagebuild/tinyipa/build_files/fakeuname b/imagebuild/tinyipa/build_files/fakeuname
deleted file mode 100755
index 96405e32..00000000
--- a/imagebuild/tinyipa/build_files/fakeuname
+++ /dev/null
@@ -1,110 +0,0 @@
-#!/bin/sh
-
-S="Linux"
-N="box"
-R="4.8.17-tinycore64"
-P="unknown"
-V="#2017 SMP"
-M="x86_64"
-I="unknown"
-O="GNU/Linux"
-
-OPT_A=false
-OPT_S=false
-OPT_N=false
-OPT_R=false
-OPT_P=false
-OPT_V=false
-OPT_M=false
-OPT_I=false
-OPT_O=false
-
-if [ -z "$1" ]; then
-  echo "-ASNRPVMIO"
-  exit 1
-fi
-
-while :; do
-  case $1 in
-    -a)
-      OPT_A=true
-      shift
-      ;;
-    -s)
-      OPT_S=true
-      shift
-      ;;
-    -n)
-      OPT_N=true
-      shift
-      ;;
-    -r)
-      OPT_R=true
-      shift
-      ;;
-    -p)
-      OPT_P=true
-      shift
-      ;;
-    -v)
-      OPT_V=true
-      shift
-      ;;
-    -m)
-      OPT_M=true
-      shift
-      ;;
-    -i)
-      OPT_I=true
-      shift
-      ;;
-    -o)
-      OPT_O=true
-      shift
-      ;;
-    -rs)
-      OPT_R=true
-      OPT_S=true
-      shift
-      ;;
-    *)
-      if [ ! -z "$1" ]; then
-        echo "uname -asnrpvmio"
-        exit 1
-      fi
-      break
-     ;;
-  esac
-done
-
-if $OPT_A; then
-    echo "$S $N $R $V $M $O"
-    exit 0
-fi
-
-string=''
-if $OPT_S; then
-    string="$string $S"
-fi
-if $OPT_N; then
-    string="$string $N"
-fi
-if $OPT_R; then
-    string="$string $R"
-fi
-if $OPT_P; then
-    string="$string $P"
-fi
-if $OPT_V; then
-    string="$string $V"
-fi
-if $OPT_M; then
-    string="$string $M"
-fi
-if $OPT_I; then
-    string="$string $I"
-fi
-if $OPT_O; then
-    string="$string $O"
-fi
-echo $string
diff --git a/imagebuild/tinyipa/build_files/finalreqs.lst b/imagebuild/tinyipa/build_files/finalreqs.lst
deleted file mode 100644
index 182bb599..00000000
--- a/imagebuild/tinyipa/build_files/finalreqs.lst
+++ /dev/null
@@ -1,18 +0,0 @@
-bash.tcz
-coreutils.tcz
-dmidecode.tcz
-gdisk.tcz
-hdparm.tcz
-iproute2.tcz
-parted.tcz
-popt.tcz
-pciutils.tcz
-raid-dm-4.8.17-tinycore64.tcz
-scsi-4.8.17-tinycore64.tcz
-udev-lib.tcz
-util-linux.tcz
-glib2.tcz
-iproute2.tcz
-smartmontools.tcz
-mdadm.tcz
-ipv6-4.8.17-tinycore64.tcz
diff --git a/imagebuild/tinyipa/build_files/finalreqs_python2.lst b/imagebuild/tinyipa/build_files/finalreqs_python2.lst
deleted file mode 100644
index c2988845..00000000
--- a/imagebuild/tinyipa/build_files/finalreqs_python2.lst
+++ /dev/null
@@ -1 +0,0 @@
-python.tcz
\ No newline at end of file
diff --git a/imagebuild/tinyipa/build_files/finalreqs_python3.lst b/imagebuild/tinyipa/build_files/finalreqs_python3.lst
deleted file mode 100644
index a2a4bdc8..00000000
--- a/imagebuild/tinyipa/build_files/finalreqs_python3.lst
+++ /dev/null
@@ -1,2 +0,0 @@
-python3.6.tcz
-expat2.tcz
\ No newline at end of file
diff --git a/imagebuild/tinyipa/build_files/isolinux.cfg b/imagebuild/tinyipa/build_files/isolinux.cfg
deleted file mode 100755
index 7fe8c22d..00000000
--- a/imagebuild/tinyipa/build_files/isolinux.cfg
+++ /dev/null
@@ -1,9 +0,0 @@
-display boot.msg
-default corepure64
-
-label corepure64
-        kernel /boot/vmlinuz64
-        initrd /boot/corepure64.gz
-        append loglevel=3 syslog showapps
-
-implicit 0
diff --git a/imagebuild/tinyipa/common.sh b/imagebuild/tinyipa/common.sh
deleted file mode 100755
index 44d9d087..00000000
--- a/imagebuild/tinyipa/common.sh
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/bash
-
-WORKDIR=$(readlink -f $0 | xargs dirname)
-source ${WORKDIR}/tc-mirror.sh
-
-# Allow an extension to be added to the generated files by specifying
-# $BRANCH_PATH e.g. export BRANCH_PATH=master results in tinyipa-master.gz etc
-BRANCH_EXT=''
-if [ -n "$BRANCH_PATH" ]; then
-    BRANCH_EXT="-$BRANCH_PATH"
-fi
-export BRANCH_EXT
-
-TC=1001
-STAFF=50
-
-CHROOT_PATH="/tmp/overides:/usr/local/sbin:/usr/local/bin:/apps/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-CHROOT_CMD="sudo chroot $DST_DIR /usr/bin/env -i PATH=$CHROOT_PATH http_proxy=$http_proxy https_proxy=$https_proxy no_proxy=$no_proxy"
-TC_CHROOT_CMD="sudo chroot --userspec=$TC:$STAFF $DST_DIR /usr/bin/env -i PATH=$CHROOT_PATH http_proxy=$http_proxy https_proxy=$https_proxy no_proxy=$no_proxy"
-
-function setup_tce {
-    # Setup resolv.conf, add mirrors, mount proc
-    local dst_dir="$1"
-
-    # Find a working TC mirror if none is explicitly provided
-    choose_tc_mirror
-
-    sudo cp $dst_dir/etc/resolv.conf $dst_dir/etc/resolv.conf.old
-    sudo cp /etc/resolv.conf $dst_dir/etc/resolv.conf
-
-    sudo cp -a $dst_dir/opt/tcemirror $dst_dir/opt/tcemirror.old
-    sudo sh -c "echo $TINYCORE_MIRROR_URL > $dst_dir/opt/tcemirror"
-
-    mkdir -p $dst_dir/tmp/builtin/optional
-    $CHROOT_CMD chown -R tc.staff /tmp/builtin
-    $CHROOT_CMD chmod -R a+w /tmp/builtin
-    $CHROOT_CMD ln -sf /tmp/builtin /etc/sysconfig/tcedir
-    echo "tc" | $CHROOT_CMD tee -a /etc/sysconfig/tcuser
-
-    # Mount /proc for chroot commands
-    sudo mount --bind /proc $dst_dir/proc
-}
-
-function cleanup_tce {
-    local dst_dir="$1"
-
-    # Unmount /proc and clean up everything
-    sudo umount $dst_dir/proc
-    sudo rm -rf $dst_dir/tmp/builtin
-    sudo rm -rf $dst_dir/tmp/tcloop
-    sudo rm -rf $dst_dir/usr/local/tce.installed
-    sudo mv $dst_dir/opt/tcemirror.old $dst_dir/opt/tcemirror
-    sudo mv $dst_dir/etc/resolv.conf.old $dst_dir/etc/resolv.conf
-    sudo rm $dst_dir/etc/sysconfig/tcuser
-    sudo rm $dst_dir/etc/sysconfig/tcedir
-}
diff --git a/imagebuild/tinyipa/finalise-tinyipa.sh b/imagebuild/tinyipa/finalise-tinyipa.sh
deleted file mode 100755
index d8f967d4..00000000
--- a/imagebuild/tinyipa/finalise-tinyipa.sh
+++ /dev/null
@@ -1,246 +0,0 @@
-#!/bin/bash
-
-set -ex
-WORKDIR=$(readlink -f $0 | xargs dirname)
-FINALDIR="$WORKDIR/tinyipafinal"
-DST_DIR=$FINALDIR
-source ${WORKDIR}/common.sh
-
-BUILDDIR="$WORKDIR/tinyipabuild"
-BUILD_AND_INSTALL_TINYIPA=${BUILD_AND_INSTALL_TINYIPA:-true}
-TINYCORE_MIRROR_URL=${TINYCORE_MIRROR_URL:-}
-ENABLE_SSH=${ENABLE_SSH:-false}
-INSTALL_SSH=${INSTALL_SSH:-true}
-AUTHORIZE_SSH=${ENABLE_SSH:-false}
-
-if $ENABLE_SSH; then
-    echo "WARNING: using ENABLE_SSH is deprecated, use INSTALL_SSH and AUTHORIZE_SSH variables instead"
-    INSTALL_SSH=true
-    AUTHORIZE_SSH=true
-fi
-
-SSH_PUBLIC_KEY=${SSH_PUBLIC_KEY:-}
-PYOPTIMIZE_TINYIPA=${PYOPTIMIZE_TINYIPA:-true}
-TINYIPA_REQUIRE_BIOSDEVNAME=${TINYIPA_REQUIRE_BIOSDEVNAME:-false}
-TINYIPA_REQUIRE_IPMITOOL=${TINYIPA_REQUIRE_IPMITOOL:-true}
-TINYIPA_UDEV_SETTLE_TIMEOUT=${TINYIPA_UDEV_SETTLE_TIMEOUT:-20}
-USE_PYTHON3=${USE_PYTHON3:-True}
-
-
-echo "Finalising tinyipa:"
-
-if $AUTHORIZE_SSH ; then
-    echo "Validating location of public SSH key"
-    if [ -n "$SSH_PUBLIC_KEY" ]; then
-        if [ -f "$SSH_PUBLIC_KEY" ]; then
-            _found_ssh_key="$SSH_PUBLIC_KEY"
-        fi
-    else
-        for fmt in rsa dsa; do
-            if [ -f "$HOME/.ssh/id_$fmt.pub" ]; then
-                _found_ssh_key="$HOME/.ssh/id_$fmt.pub"
-                break
-            fi
-        done
-    fi
-
-    if [ -z $_found_ssh_key ]; then
-        echo "Failed to find neither provided nor default SSH key"
-        exit 1
-    fi
-fi
-
-sudo -v
-
-if [ -d "$FINALDIR" ]; then
-    sudo rm -rf "$FINALDIR"
-fi
-
-mkdir "$FINALDIR"
-
-# Extract rootfs from .gz file
-( cd "$FINALDIR" && zcat $WORKDIR/build_files/corepure64.gz | sudo cpio -i -H newc -d )
-
-# Setup Final Dir
-setup_tce "$DST_DIR"
-
-# Modify ldconfig for x86-64
-$CHROOT_CMD cp /sbin/ldconfig /sbin/ldconfigold
-printf '#!/bin/sh\n/sbin/ldconfigold $@ | sed -r "s/libc6|ELF/libc6,x86-64/"' | $CHROOT_CMD tee -a /sbin/ldconfignew
-$CHROOT_CMD cp /sbin/ldconfignew /sbin/ldconfig
-$CHROOT_CMD chmod u+x /sbin/ldconfig
-
-# Copy python wheels from build to final dir
-cp -Rp "$BUILDDIR/tmp/wheels" "$FINALDIR/tmp/wheelhouse"
-
-cp $WORKDIR/build_files/tgt.* $FINALDIR/tmp/builtin/optional
-cp $WORKDIR/build_files/qemu-utils.* $FINALDIR/tmp/builtin/optional
-cp $WORKDIR/build_files/lshw.* $FINALDIR/tmp/builtin/optional
-
-if $TINYIPA_REQUIRE_BIOSDEVNAME; then
-    cp $WORKDIR/build_files/biosdevname.* $FINALDIR/tmp/builtin/optional
-fi
-if $TINYIPA_REQUIRE_IPMITOOL; then
-    cp $WORKDIR/build_files/ipmitool.* $FINALDIR/tmp/builtin/optional
-fi
-
-mkdir $FINALDIR/tmp/overides
-cp $WORKDIR/build_files/fakeuname $FINALDIR/tmp/overides/uname
-
-PY_REQS="finalreqs_python2.lst"
-if [[ $USE_PYTHON3 == "True" ]]; then
-    PY_REQS="finalreqs_python3.lst"
-fi
-
-while read line; do
-    $TC_CHROOT_CMD tce-load -wic $line
-done < <(paste $WORKDIR/build_files/finalreqs.lst $WORKDIR/build_files/$PY_REQS)
-
-if $INSTALL_SSH ; then
-    # Install and configure bare minimum for SSH access
-    $TC_CHROOT_CMD tce-load -wic openssh
-    # Configure OpenSSH
-    $CHROOT_CMD cp /usr/local/etc/ssh/sshd_config.orig /usr/local/etc/ssh/sshd_config
-    echo "PasswordAuthentication no" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-    # Generate and configure host keys - RSA, DSA, Ed25519
-    # NOTE(pas-ha) ECDSA host key will still be re-generated fresh on every image boot
-    $CHROOT_CMD ssh-keygen -t rsa -N "" -f /usr/local/etc/ssh/ssh_host_rsa_key
-    $CHROOT_CMD ssh-keygen -t dsa -N "" -f /usr/local/etc/ssh/ssh_host_dsa_key
-    $CHROOT_CMD ssh-keygen -t ed25519 -N "" -f /usr/local/etc/ssh/ssh_host_ed25519_key
-    echo "HostKey /usr/local/etc/ssh/ssh_host_rsa_key" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-    echo "HostKey /usr/local/etc/ssh/ssh_host_dsa_key" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-    echo "HostKey /usr/local/etc/ssh/ssh_host_ed25519_key" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-
-    # setup user and SSH keys
-    if $AUTHORIZE_SSH; then
-        $CHROOT_CMD mkdir -p /home/tc
-        $CHROOT_CMD chown -R tc.staff /home/tc
-        $TC_CHROOT_CMD mkdir -p /home/tc/.ssh
-        cat $_found_ssh_key | $TC_CHROOT_CMD tee /home/tc/.ssh/authorized_keys
-        $CHROOT_CMD chown tc.staff /home/tc/.ssh/authorized_keys
-        $TC_CHROOT_CMD chmod 600 /home/tc/.ssh/authorized_keys
-    fi
-fi
-
-$TC_CHROOT_CMD tce-load -ic /tmp/builtin/optional/tgt.tcz
-$TC_CHROOT_CMD tce-load -ic /tmp/builtin/optional/qemu-utils.tcz
-$TC_CHROOT_CMD tce-load -ic /tmp/builtin/optional/lshw.tcz
-if $TINYIPA_REQUIRE_BIOSDEVNAME; then
-    $TC_CHROOT_CMD tce-load -ic /tmp/builtin/optional/biosdevname.tcz
-fi
-if $TINYIPA_REQUIRE_IPMITOOL; then
-    $TC_CHROOT_CMD tce-load -ic /tmp/builtin/optional/ipmitool.tcz
-fi
-
-# Ensure tinyipa picks up installed kernel modules
-$CHROOT_CMD depmod -a `$WORKDIR/build_files/fakeuname -r`
-
-PIP_COMMAND="pip"
-TINYIPA_PYTHON_EXE="python"
-if [[ $USE_PYTHON3 == "True" ]]; then
-    PIP_COMMAND="pip3"
-    TINYIPA_PYTHON_EXE="python3"
-fi
-
-# Install pip
-$CHROOT_CMD ${TINYIPA_PYTHON_EXE} -m ensurepip --upgrade
-
-# If flag is set install python now
-if $BUILD_AND_INSTALL_TINYIPA ; then
-    $CHROOT_CMD $PIP_COMMAND install --no-index --find-links=file:///tmp/wheelhouse --pre ironic_python_agent
-    rm -rf $FINALDIR/tmp/wheelhouse
-fi
-
-# Unmount /proc and clean up everything
-cleanup_tce "$DST_DIR"
-
-# Copy bootlocal.sh to opt
-sudo cp "$WORKDIR/build_files/bootlocal.sh" "$FINALDIR/opt/."
-
-# Copy udhcpc.script to opt
-sudo cp "$WORKDIR/udhcpc.script" "$FINALDIR/opt/"
-
-# Replace etc/init.d/dhcp.sh
-sudo cp "$WORKDIR/build_files/dhcp.sh" "$FINALDIR/etc/init.d/dhcp.sh"
-sudo sed -i "s/%UDEV_SETTLE_TIMEOUT%/$TINYIPA_UDEV_SETTLE_TIMEOUT/" "$FINALDIR/etc/init.d/dhcp.sh"
-
-# Disable ZSwap
-sudo sed -i '/# Main/a NOZSWAP=1' "$FINALDIR/etc/init.d/tc-config"
-# sudo cp $WORKDIR/build_files/tc-config $FINALDIR/etc/init.d/tc-config
-
-if $PYOPTIMIZE_TINYIPA; then
-    # Precompile all python
-    if [[ $USE_PYTHON3 == "True" ]]; then
-        set +e
-        $CHROOT_CMD /bin/bash -c "python3 -OO -m compileall /usr/local/lib/python3.6"
-        set -e
-        find $FINALDIR/usr/local/lib/python3.6 -name "*.py" -not -path "*ironic_python_agent/api/config.py" | sudo xargs --no-run-if-empty rm
-        find $FINALDIR/usr/local/lib/python3.6 -name "*.pyc" ! -name "*opt-2*" | sudo xargs --no-run-if-empty rm
-        sudo find $FINALDIR/usr/local/lib/python3.6 -type d -name __pycache__ -exec sh -c 'cd "$1"; for f in *; do mv -i "$f" .. ; done' find-sh {} \;
-        find $FINALDIR/usr/local/lib/python3.6 -name "*.cpython-36.opt-2*" | sed 'p;s/\.cpython-36\.opt-2//' | sudo xargs -n2 --no-run-if-empty mv
-    fi
-    set +e
-    $CHROOT_CMD /bin/bash -c "python -OO -m compileall /usr/local/lib/python2.7"
-    set -e
-    find $FINALDIR/usr/local/lib/python2.7 -name "*.py" -not -path "*ironic_python_agent/api/config.py" | sudo xargs --no-run-if-empty rm
-    find $FINALDIR/usr/local/lib/python2.7 -name "*.pyc" | sudo xargs --no-run-if-empty rm
-    if $INSTALL_SSH && $AUTHORIZE_SSH ; then
-        # NOTE(pas-ha) for Ansible+Python to work we need to ensure that
-        # PYTHONOPTIMIZE=1 is set for all sessions from 'tc' user including
-        # those that are elevated with 'sudo' afterwards
-        echo "PYTHONOPTIMIZE=1" | $TC_CHROOT_CMD tee -a /home/tc/.ssh/environment
-        echo "PermitUserEnvironment yes" | $CHROOT_CMD tee -a /usr/local/etc/ssh/sshd_config
-        echo 'Defaults env_keep += "PYTHONOPTIMIZE"' | $CHROOT_CMD tee -a /etc/sudoers
-    fi
-else
-    sudo sed -i "s/PYTHONOPTIMIZE=1/PYTHONOPTIMIZE=0/" "$FINALDIR/opt/bootlocal.sh"
-fi
-
-# Delete unnecessary Babel .dat files
-find $FINALDIR -path "*babel/locale-data/*.dat" -not -path "*en_US*" | sudo xargs --no-run-if-empty rm
-
-# NOTE(pas-ha) Apparently on TinyCore Ansible's 'command' module is
-# not searching for executables in the '/usr/local/(s)bin' paths.
-# Thus we symlink everything from there to '/usr/(s)bin' which is being searched,
-# so that 'command' module picks full utilities installed by 'util-linux'
-# instead of built-in simplified BusyBox ones.
-set +x
-echo "Symlink all from /usr/local/sbin to /usr/sbin"
-pushd "$FINALDIR/usr/local/sbin"
-for target in *; do
-    if [ ! -f "$FINALDIR/usr/sbin/$target" ]; then
-        $CHROOT_CMD ln -s "/usr/local/sbin/$target" "/usr/sbin/$target"
-    fi
-done
-popd
-echo "Symlink all from /usr/local/bin to /usr/bin"
-# this also includes symlinking Python to the place expected by Ansible
-pushd "$FINALDIR/usr/local/bin"
-for target in *; do
-    if [ ! -f "$FINALDIR/usr/bin/$target" ]; then
-        $CHROOT_CMD ln -s "/usr/local/bin/$target" "/usr/bin/$target"
-    fi
-done
-popd
-set -x
-
-# Rebuild build directory into gz file
-( cd "$FINALDIR" && sudo find | sudo cpio -o -H newc | gzip -9 > "$WORKDIR/tinyipa${BRANCH_EXT}.gz" )
-
-# Copy vmlinuz to new name
-cp "$WORKDIR/build_files/vmlinuz64" "$WORKDIR/tinyipa${BRANCH_EXT}.vmlinuz"
-
-# Create tar.gz containing tinyipa files
-tar czf tinyipa${BRANCH_EXT}.tar.gz tinyipa${BRANCH_EXT}.gz tinyipa${BRANCH_EXT}.vmlinuz
-
-# Create sha256 files which will be uploaded by the publish jobs along with
-# the tinyipa ones in order to provide a way to verify the integrity of the tinyipa
-# builds.
-for f in tinyipa${BRANCH_EXT}.{gz,tar.gz,vmlinuz}; do
-    sha256sum $f > $f.sha256
-done
-
-# Output files with sizes created by this script
-echo "Produced files:"
-du -h tinyipa${BRANCH_EXT}.gz tinyipa${BRANCH_EXT}.tar.gz tinyipa${BRANCH_EXT}.vmlinuz
-echo "Checksums: " tinyipa${BRANCH_EXT}.*sha256
diff --git a/imagebuild/tinyipa/install-deps.sh b/imagebuild/tinyipa/install-deps.sh
deleted file mode 100755
index 1c055544..00000000
--- a/imagebuild/tinyipa/install-deps.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-COMMON_PACKAGES="wget python-pip unzip sudo gawk"
-APT_PACKAGES="${COMMON_PACKAGES} squashfs-tools"
-YUM_PACKAGES="${COMMON_PACKAGES} squashfs-tools"
-ZYPPER_PACKAGES="${COMMON_PACKAGES} squashfs"
-
-echo "Installing dependencies:"
-
-# first zypper in case zypper-aptitude is installed
-if [ -x "/usr/bin/zypper" ]; then
-    sudo -E zypper -n install -l ${ZYPPER_PACKAGES}
-elif [ -x "/usr/bin/apt-get" ]; then
-    sudo -E apt-get update
-    sudo -E apt-get install -y ${APT_PACKAGES}
-elif [ -x "/usr/bin/dnf" ]; then
-    sudo -E dnf install -y ${YUM_PACKAGES}
-elif [ -x "/usr/bin/yum" ]; then
-    sudo -E yum install -y ${YUM_PACKAGES}
-else
-    echo "No supported package manager installed on system. Supported: apt, yum, dnf, zypper"
-    exit 1
-fi
diff --git a/imagebuild/tinyipa/tc-mirror.sh b/imagebuild/tinyipa/tc-mirror.sh
deleted file mode 100644
index d7cd8b9f..00000000
--- a/imagebuild/tinyipa/tc-mirror.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-
-#NOTE(pas-ha)
-# The first URL is the official TC repo,
-# the rest of the list is taken from
-# http://wiki.tinycorelinux.net/wiki:mirrors
-# as of time of this writing.
-# Only HTTP mirrors were considered with the following ordering
-# - those that were unavailable are moved to the bottom of the list
-# - those that already responded with 404 are moved to the very bottom
-
-# List generated on 12-Dec-2016
-TC_MIRRORS="http://repo.tinycorelinux.net
-http://distro.ibiblio.org/tinycorelinux
-http://mirror.cedia.org.ec/tinycorelinux
-http://mirror.epn.edu.ec/tinycorelinux
-http://mirrors.163.com/tinycorelinux
-http://kambing.ui.ac.id/tinycorelinux
-http://ftp.nluug.nl/os/Linux/distr/tinycorelinux
-http://ftp.vim.org/os/Linux/distr/tinycorelinux
-http://www.gtlib.gatech.edu/pub/tinycore
-http://tinycore.mirror.uber.com.au
-http://l4u-00.jinr.ru/LinuxArchive/Ftp/tinycorelinux"
-
-function probe_url {
-    wget -q --spider --tries 1 --timeout 10 "$1" 2>&1
-}
-
-function choose_tc_mirror {
-    if [ -z ${TINYCORE_MIRROR_URL} ]; then
-        for url in ${TC_MIRRORS}; do
-            echo "Checking Tiny Core Linux mirror ${url}"
-            if probe_url ${url} ; then
-                echo "Check succeeded: ${url} is responding."
-                TINYCORE_MIRROR_URL=${url}
-                break
-            else
-                echo "Check failed: ${url} is not responding"
-            fi
-        done
-        if [ -z ${TINYCORE_MIRROR_URL} ]; then
-            echo "Failed to find working Tiny Core Linux mirror"
-            exit 1
-        fi
-    else
-        echo "Probing provided Tiny Core Linux mirror ${TINYCORE_MIRROR_URL}"
-        if probe_url ${TINYCORE_MIRROR_URL} ; then
-            echo "Check succeeded: ${TINYCORE_MIRROR_URL} is responding."
-        else
-            echo "Check failed: ${TINYCORE_MIRROR_URL} is not responding"
-            exit 1
-        fi
-    fi
-}
diff --git a/imagebuild/tinyipa/udhcpc.script b/imagebuild/tinyipa/udhcpc.script
deleted file mode 100755
index 1de671ba..00000000
--- a/imagebuild/tinyipa/udhcpc.script
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-
-# file created to be used for static network configuration as well
-
-[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
-
-RESOLV_CONF="/etc/resolv.conf"
-[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-[ -n "$subnet" ] && NETMASK="netmask $subnet"
-
-case "$1" in
-        deconfig)
-                /sbin/ifconfig $interface 0.0.0.0
-                ;;
-
-        renew|bound)
-                /sbin/ifconfig $interface up
-                /sbin/ifconfig $interface $ip $BROADCAST $NETMASK
-
-                if [ -n "$router" ] ; then
-                        echo "deleting routers"
-                        while route del default gw 0.0.0.0 dev $interface ; do
-                                :
-                        done
-
-                        metric=0
-                        for i in $router ; do
-                                route add default gw $i dev $interface metric $((metric++))
-                        done
-                fi
-
-                echo -n > $RESOLV_CONF
-                [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
-                for i in $dns ; do
-                        echo adding dns $i
-                        echo nameserver $i >> $RESOLV_CONF
-                done
-                ;;
-esac
-
-exit 0
-