Update .rst files

This commit follows up the observations in review 756708, updates
`$node_ident`, `$uuid` & `${node_uuid}` to <node>.

Story: 2008194
Task: 40964

Change-Id: I7cd08a37071ce330b4c254595d0745ca154ced2b

3 files changed, 16 insertions, 16 deletions

diff --git a/doc/source/admin/drivers/idrac.rst b/doc/source/admin/drivers/idrac.rst
index aa6503215..41b2dd392 100644
--- a/doc/source/admin/drivers/idrac.rst
+++ b/doc/source/admin/drivers/idrac.rst
@@ -384,7 +384,7 @@ The following command can be used to create a RAID configuration:
 .. code-block:: bash
 
   baremetal node clean --clean-steps \
-    '[{"interface": "raid", "step": "create_configuration"}]' ${node_uuid}
+    '[{"interface": "raid", "step": "create_configuration"}]' <node>
 
 
 When the physical disk names or controller names are not known, the
@@ -459,7 +459,7 @@ Get BIOS Config
 
 .. code-block:: bash
 
-  baremetal node passthru call --http-method GET ${node_uuid} get_bios_config
+  baremetal node passthru call --http-method GET <node> get_bios_config
 
 Snippet of output showing virtualization enabled:
 
@@ -491,7 +491,7 @@ Set BIOS Config
 
 .. code-block:: bash
 
-  baremetal node passthru call ${node_uuid} set_bios_config --arg "name=value"
+  baremetal node passthru call <node> set_bios_config --arg "name=value"
 
 
 Walkthrough of perfoming a BIOS configuration change:
@@ -505,7 +505,7 @@ two properties that are being changed are:
 
 .. code-block:: bash
 
-  baremetal node passthru call ${node_uuid} set_bios_config \
+  baremetal node passthru call <node> set_bios_config \
     --arg "ProcVirtualization=Enabled" \
     --arg "SriovGlobalEnable=Enabled"
 
@@ -532,7 +532,7 @@ Ironic power API.
 
 .. code-block:: bash
 
-  baremetal node passthru call ${node_uuid} commit_bios_config \
+  baremetal node passthru call <node> commit_bios_config \
     --arg "reboot=true"
 
 .. code-block:: json
@@ -546,7 +546,7 @@ The state of any executing job can be queried:
 
 .. code-block:: bash
 
-  baremetal node passthru call --http-method GET ${node_uuid} list_unfinished_jobs
+  baremetal node passthru call --http-method GET <node> list_unfinished_jobs
 
 
 .. code-block:: json
@@ -568,7 +568,7 @@ Instead of committing, a pending change can be abandoned:
 
 .. code-block:: bash
 
-  baremetal node passthru call --http-method DELETE ${node_uuid} abandon_bios_config
+  baremetal node passthru call --http-method DELETE <node> abandon_bios_config
 
 The abandon command does not provide a response body.
 
@@ -609,18 +609,18 @@ The boot mode can be changed via the vendor passthru interface as follows:
 
 .. code-block:: bash
 
-  baremetal node passthru call ${node_uuid} set_bios_config \
+  baremetal node passthru call <node> set_bios_config \
     --arg "BootMode=Uefi"
 
-  baremetal node passthru call ${node_uuid} commit_bios_config \
+  baremetal node passthru call <node> commit_bios_config \
     --arg "reboot=true"
 
 .. code-block:: bash
 
-  baremetal node passthru call ${node_uuid} set_bios_config \
+  baremetal node passthru call <node> set_bios_config \
     --arg "BootMode=Bios"
 
-  baremetal node passthru call ${node_uuid} commit_bios_config \
+  baremetal node passthru call <node> commit_bios_config \
     --arg "reboot=true"
 
 Known Issues
diff --git a/doc/source/admin/node-deployment.rst b/doc/source/admin/node-deployment.rst
index 4a1a3310c..0e6e6966c 100644
--- a/doc/source/admin/node-deployment.rst
+++ b/doc/source/admin/node-deployment.rst
@@ -103,7 +103,7 @@ To check what deploy step the node is performing or attempted to perform and
 failed, run the following command; it will return the value in the node's
 ``driver_internal_info`` field::
 
-    baremetal node show $node_ident -f value -c driver_internal_info
+    baremetal node show <node> -f value -c driver_internal_info
 
 The ``deploy_steps`` field will contain a list of all remaining steps with
 their priorities, and the first one listed is the step currently in progress or
@@ -261,11 +261,11 @@ Example of use with the Compute service
 .. note:: The deploy steps used in this example are for example purposes only.
 
 In the following example, we first add the trait ``CUSTOM_HYPERTHREADING_ON``
-to the node represented by ``$node_ident``:
+to the node represented by ``<node>``:
 
 .. code-block:: console
 
-   baremetal node add trait $node_ident CUSTOM_HYPERTHREADING_ON
+   baremetal node add trait <node> CUSTOM_HYPERTHREADING_ON
 
 We also update the flavor ``bm-hyperthreading-on`` in the Compute
 service with the following property:
@@ -311,7 +311,7 @@ To make this example more dynamic, let's add a second trait
 
 .. code-block:: console
 
-   baremetal node add trait $node_ident CUSTOM_HYPERTHREADING_OFF
+   baremetal node add trait <node> CUSTOM_HYPERTHREADING_OFF
 
 We could also update a second flavor, ``bm-hyperthreading-off``, with the
 following property:
diff --git a/doc/source/admin/upgrade-to-hardware-types.rst b/doc/source/admin/upgrade-to-hardware-types.rst
index 1a4757524..93d293142 100644
--- a/doc/source/admin/upgrade-to-hardware-types.rst
+++ b/doc/source/admin/upgrade-to-hardware-types.rst
@@ -93,7 +93,7 @@ set new values for some or all interfaces:
     export OS_BAREMETAL_API_VERSION=1.31
 
     for uuid in $(baremetal node list --driver pxe_ipmitool -f value -c UUID); do
-        baremetal node set $uuid --driver ipmi --deploy-interface iscsi
+        baremetal node set <node> --driver ipmi --deploy-interface iscsi
     done
 
     for uuid in $(baremetal node list --driver agent_ipmitool -f value -c UUID); do