diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/topics/dpdk/phy.rst | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/Documentation/topics/dpdk/phy.rst b/Documentation/topics/dpdk/phy.rst index 937f4c40e..8fc34a378 100644 --- a/Documentation/topics/dpdk/phy.rst +++ b/Documentation/topics/dpdk/phy.rst @@ -267,7 +267,7 @@ Representors are multi devices created on top of one PF. For more information, refer to the `DPDK documentation`__. -__ https://doc.dpdk.org/guides-21.11/prog_guide/switch_representation.html +__ https://doc.dpdk.org/guides-21.11/prog_guide/switch_representation.html#port-representors Prior to port representors there was a one-to-one relationship between the PF and the eth device. With port representors the relationship becomes one PF to @@ -287,18 +287,18 @@ address in devargs. For an existing bridge called ``br0`` and PCI address When configuring a VF-based port, DPDK uses an extended devargs syntax which has the following format:: - BDBF,representor=[<representor id>] + BDBF,representor=<representor identifier> This syntax shows that a representor is an enumerated eth device (with -a representor ID) which uses the PF PCI address. -The following commands add representors 3 and 5 using PCI device address +a representor identifier) which uses the PF PCI address. +The following commands add representors of VF 3 and 5 using PCI device address ``0000:08:00.0``:: $ ovs-vsctl add-port br0 dpdk-rep3 -- set Interface dpdk-rep3 type=dpdk \ - options:dpdk-devargs=0000:08:00.0,representor=[3] + options:dpdk-devargs=0000:08:00.0,representor=vf3 $ ovs-vsctl add-port br0 dpdk-rep5 -- set Interface dpdk-rep5 type=dpdk \ - options:dpdk-devargs=0000:08:00.0,representor=[5] + options:dpdk-devargs=0000:08:00.0,representor=vf5 .. important:: |