This database is the interface between OVN and the cloud management system (CMS), such as OpenStack, running above it. The CMS produces almost all of the contents of the database. The ovn-northd program monitors the database contents, transforms it, and stores it into the database.

We generally speak of ``the'' CMS, but one can imagine scenarios in which multiple CMSes manage different parts of an OVN deployment.

External IDs

Each of the tables in this database contains a special column, named external_ids. This column has the same form and purpose each place it appears.

external_ids: map of string-string pairs
Key-value pairs for use by the CMS. The CMS might use certain pairs, for example, to identify entities in its own configuration that correspond to those in this database.

Northbound configuration for an OVN system. This table must have exactly one row.

These columns allow a client to track the overall configuration state of the system. Sequence number for client to increment. When a client modifies any part of the northbound database configuration and wishes to wait for ovn-northd and possibly all of the hypervisors to finish applying the changes, it may increment this sequence number. Sequence number that ovn-northd sets to the value of after it finishes applying the corresponding configuration changes to the database. Sequence number that ovn-northd sets to the smallest sequence number of all the chassis in the system, as reported in the Chassis table in the southbound database. Thus, equals if all chassis are caught up with the northbound configuration (which may never happen, if any chassis is down). This value can regress, if a chassis was removed from the system and rejoins before catching up. See External IDs at the beginning of this document. Database clients to which the Open vSwitch database server should connect or on which it should listen, along with options for how these connections should be configured. See the table for more information. Global SSL configuration.

Each row represents one L2 logical switch.

There are two kinds of logical switches, that is, ones that fully virtualize the network (overlay logical switches) and ones that provide simple connectivity to a physical network (bridged logical switches). They work in the same way when providing connectivity between logical ports on same chasis, but differently when connecting remote logical ports. Overlay logical switches connect remote logical ports by tunnels, while bridged logical switches provide connectivity to remote ports by bridging the packets to directly connected physical L2 segment with the help of localnet ports. Each bridged logical switch has one and only one localnet port, which has only one special address unknown.

A name for the logical switch. This name has no special meaning or purpose other than to provide convenience for human interaction with the ovn-nb database. There is no requirement for the name to be unique. The logical switch's UUID should be used as the unique identifier.

The logical ports connected to the logical switch.

It is an error for multiple logical switches to include the same logical port.

Load balance a virtual ipv4 address to a set of logical port endpoint ipv4 addresses. Access control rules that apply to packets within the logical switch. QOS marking rules that apply to packets within the logical switch.

Additional configuration options for the logical switch.

Set this to an IPv4 subnet, e.g. 192.168.0.0/24, to enable ovn-northd to automatically assign IP addresses within that subnet. Use the dynamic keyword in the table's column to request dynamic address assignment for a particular port. See External IDs at the beginning of this document.

A port within an L2 logical switch.

The logical port name.

For entities (VMs or containers) that are spawned in the hypervisor, the name used here must match those used in the in the database's table, because hypervisors use as a lookup key to identify the network interface of that entity.

For containers that share a VIF within a VM, the name can be any unique identifier. See Containers, below, for more information.

Specify a type for this logical port. Logical ports can be used to model other types of connectivity into an OVN logical switch. The following types are defined:

(empty string)
A VM (or VIF) interface.
router
A connection to a logical router.
localnet
A connection to a locally accessible network from each ovn-controller instance. A logical switch can only have a single localnet port attached. This is used to model direct connectivity to an existing network.
l2gateway
A connection to a physical network.
vtep
A port to a logical switch on a VTEP gateway.
This column provides key/value settings specific to the logical port . The type-specific options are described individually below.

These options apply when is router.

Required. The of the to which this logical switch port is connected.

This is used to send gratuitous ARPs for SNAT and DNAT IP addresses via localnet and is valid for only L3 gateway ports.

This must take one of the following forms:

router

Gratuitous ARPs will be sent for all SNAT and DNAT external IP addresses and for all load balancer IP addresses defined on the 's logical router, using the 's MAC address.

Supported only in OVN 2.8 and later. Earlier versions required NAT addresses to be manually synchronized.

Ethernet address followed by one or more IPv4 addresses
Example: 80:fa:5b:06:72:b7 158.36.44.22 158.36.44.24. This would result in generation of gratuitous ARPs for IP addresses 158.36.44.22 and 158.36.44.24 with a MAC address of 80:fa:5b:06:72:b7.

These options apply when is localnet.

Required. The name of the network to which the localnet port is connected. Each hypervisor, via ovn-controller, uses its local configuration to determine exactly how to connect to this locally accessible network.

These options apply when is l2gateway.

Required. The name of the network to which the l2gateway port is connected. The L2 gateway, via ovn-controller, uses its local configuration to determine exactly how to connect to this network. Required. The chassis on which the l2gateway logical port should be bound to. ovn-controller running on the defined chassis will connect this logical port to the physical network.

These options apply when is vtep.

Required. The name of the VTEP gateway. Required. A logical switch name connected by the VTEP gateway.

These options apply to logical ports with having (empty string)

If set, indicates the maximum rate for data sent from this interface, in bit/s. The traffic will be shaped according to this limit. If set, indicates the maximum burst size for data sent from this interface, in bits.

When a large number of containers are nested within a VM, it may be too expensive to dedicate a VIF to each container. OVN can use VLAN tags to support such cases. Each container is assigned a VLAN ID and each packet that passes between the hypervisor and the VM is tagged with the appropriate ID for the container. Such VLAN IDs never appear on a physical wire, even inside a tunnel, so they need not be unique except relative to a single VM on a hypervisor.

These columns are used for VIFs that represent nested containers using shared VIFs. For VMs and for containers that have dedicated VIFs, they are empty.

The VM interface through which the nested container sends its network traffic. This must match the column for some other .

The VLAN tag in the network traffic associated with a container's network interface. The client can request ovn-northd to allocate a tag that is unique within the scope of a specific parent (specified in ) by setting a value of 0 in this column. The allocated value is written by ovn-northd in the column. (Note that these tags are allocated and managed locally in ovn-northd, so they cannot be reconstructed in the event that the database is lost.) The client can also request a specific non-zero tag and ovn-northd will honor it and copy that value to the column.

When is set to localnet or l2gateway, this can be set to indicate that the port represents a connection to a specific VLAN on a locally accessible network. The VLAN ID is used to match incoming traffic and is also added to outgoing traffic.

The VLAN tag allocated by ovn-northd based on the contents of the column.

This column is populated by ovn-northd, rather than by the CMS plugin as is most of this database. When a logical port is bound to a physical location in the OVN Southbound database table, ovn-northd sets this column to true; otherwise, or if the port becomes unbound later, it sets it to false. This allows the CMS to wait for a VM's (or container's) networking to become active before it allows the VM (or container) to start. This column is used to administratively set port state. If this column is empty or is set to true, the port is enabled. If this column is set to false, the port is disabled. A disabled port has all ingress and egress traffic dropped.

Addresses owned by the logical port.

Each element in the set must take one of the following forms:

Ethernet address followed by zero or more IPv4 or IPv6 addresses (or both)

An Ethernet address defined is owned by the logical port. Like a physical Ethernet NIC, a logical port ordinarily has a single fixed Ethernet address.

When a OVN logical switch processes a unicast Ethernet frame whose destination MAC address is in a logical port's column, it delivers it only to that port, as if a MAC learning process had learned that MAC address on the port.

If IPv4 or IPv6 address(es) (or both) are defined, it indicates that the logical port owns the given IP addresses.

If IPv4 address(es) are defined, the OVN logical switch uses this information to synthesize responses to ARP requests without traversing the physical network. The OVN logical router connected to the logical switch, if any, uses this information to avoid issuing ARP requests for logical switch ports.

Note that the order here is important. The Ethernet address must be listed before the IP address(es) if defined.

Examples:

80:fa:5b:06:72:b7
This indicates that the logical port owns the above mac address.
80:fa:5b:06:72:b7 10.0.0.4 20.0.0.4
This indicates that the logical port owns the mac address and two IPv4 addresses.
80:fa:5b:06:72:b7 fdaa:15f2:72cf:0:f816:3eff:fe20:3f41
This indicates that the logical port owns the mac address and 1 IPv6 address.
80:fa:5b:06:72:b7 10.0.0.4 fdaa:15f2:72cf:0:f816:3eff:fe20:3f41
This indicates that the logical port owns the mac address and 1 IPv4 address and 1 IPv6 address.
unknown
This indicates that the logical port has an unknown set of Ethernet addresses. When an OVN logical switch processes a unicast Ethernet frame whose destination MAC address is not in any logical port's column, it delivers it to the port (or ports) whose columns include unknown.
dynamic
Use this keyword to make ovn-northd generate a globally unique MAC address and choose an unused IPv4 address with the logical port's subnet and store them in the port's column. ovn-northd will use the subnet specified in in the port's .
Ethernet address followed by keyword "dynamic"

The keyword dynamic after the MAC address indicates that ovn-northd should choose an unused IPv4 address from the logical port's subnet and store it with the specified MAC in the port's column. ovn-northd will use the subnet specified in in the port's table.

Examples:

80:fa:5b:06:72:b7 dynamic
This indicates that the logical port owns the specified MAC address and ovn-northd should allocate an unused IPv4 address for the logical port from the corresponding logical switch subnet.
router

Accepted only when is router. This indicates that the Ethernet, IPv4, and IPv6 addresses for this logical switch port should be obtained from the connected logical router port, as specified by router-port in .

The resulting addresses are used to populate the logical switch's destination lookup, and also for the logical switch to generate ARP and ND replies.

If the connected logical router port has a redirect-chassis specified and the logical router has rules specified in with , then those addresses are also used to populate the switch's destination lookup.

Supported only in OVN 2.7 and later. Earlier versions required router addresses to be manually synchronized.

Addresses assigned to the logical port by ovn-northd, if dynamic is specified in . Addresses will be of the same format as those that populate the column. Note that dynamically assigned addresses are constructed and managed locally in ovn-northd, so they cannot be reconstructed in the event that the database is lost.

This column controls the addresses from which the host attached to the logical port (``the host'') is allowed to send packets and to which it is allowed to receive packets. If this column is empty, all addresses are permitted.

Each element in the set must begin with one Ethernet address. This would restrict the host to sending packets from and receiving packets to the ethernet addresses defined in the logical port's column. It also restricts the inner source MAC addresses that the host may send in ARP and IPv6 Neighbor Discovery packets. The host is always allowed to receive packets to multicast and broadcast Ethernet addresses.

Each element in the set may additionally contain one or more IPv4 or IPv6 addresses (or both), with optional masks. If a mask is given, it must be a CIDR mask. In addition to the restrictions described for Ethernet addresses above, such an element restricts the IPv4 or IPv6 addresses from which the host may send and to which it may receive packets to the specified addresses. A masked address, if the host part is zero, indicates that the host is allowed to use any address in the subnet; if the host part is nonzero, the mask simply indicates the size of the subnet. In addition:

  • If any IPv4 address is given, the host is also allowed to receive packets to the IPv4 local broadcast address 255.255.255.255 and to IPv4 multicast addresses (224.0.0.0/4). If an IPv4 address with a mask is given, the host is also allowed to receive packets to the broadcast address in that specified subnet.

    If any IPv4 address is given, the host is additionally restricted to sending ARP packets with the specified source IPv4 address. (RARP is not restricted.)

  • If any IPv6 address is given, the host is also allowed to receive packets to IPv6 multicast addresses (ff00::/8).

    If any IPv6 address is given, the host is additionally restricted to sending IPv6 Neighbor Discovery Solicitation or Advertisement packets with the specified source address or, for solicitations, the unspecified address.

If an element includes an IPv4 address, but no IPv6 addresses, then IPv6 traffic is not allowed. If an element includes an IPv6 address, but no IPv4 address, then IPv4 and ARP traffic is not allowed.

This column uses the same lexical syntax as the column in the OVN Southbound database's table. Multiple addresses within an element may be space or comma separated.

This column is provided as a convenience to cloud management systems, but all of the features that it implements can be implemented as ACLs using the table.

Examples:

80:fa:5b:06:72:b7
The host may send traffic from and receive traffic to the specified MAC address, and to receive traffic to Ethernet multicast and broadcast addresses, but not otherwise. The host may not send ARP or IPv6 Neighbor Discovery packets with inner source Ethernet addresses other than the one specified.
80:fa:5b:06:72:b7 192.168.1.10/24
This adds further restrictions to the first example. The host may send IPv4 packets from or receive IPv4 packets to only 192.168.1.10, except that it may also receive IPv4 packets to 192.168.1.255 (based on the subnet mask), 255.255.255.255, and any address in 224.0.0.0/4. The host may not send ARPs with a source Ethernet address other than 80:fa:5b:06:72:b7 or source IPv4 address other than 192.168.1.10. The host may not send or receive any IPv6 (including IPv6 Neighbor Discovery) traffic.
"80:fa:5b:12:42:ba", "80:fa:5b:06:72:b7 192.168.1.10/24"
The host may send traffic from and receive traffic to the specified MAC addresses, and to receive traffic to Ethernet multicast and broadcast addresses, but not otherwise. With MAC 80:fa:5b:12:42:ba, the host may send traffic from and receive traffic to any L3 address. With MAC 80:fa:5b:06:72:b7, the host may send IPv4 packets from or receive IPv4 packets to only 192.168.1.10, except that it may also receive IPv4 packets to 192.168.1.255 (based on the subnet mask), 255.255.255.255, and any address in 224.0.0.0/4. The host may not send or receive any IPv6 (including IPv6 Neighbor Discovery) traffic.
This column defines the DHCPv4 Options to be included by the ovn-controller when it replies to the DHCPv4 requests. Please see the table. This column defines the DHCPv6 Options to be included by the ovn-controller when it replies to the DHCPv6 requests. Please see the table. See External IDs at the beginning of this document.

Each row in this table represents a named set of addresses. An address set may contain Ethernet, IPv4, or IPv6 addresses with optional bitwise or CIDR masks. Address set may ultimately be used in ACLs to compare against fields such as ip4.src or ip6.src. A single address set must contain addresses of the same type. As an example, the following would create an address set with three IP addresses: 

      ovn-nbctl create Address_Set name=set1 addresses='10.0.0.1 10.0.0.2 10.0.0.3'

Address sets may be used in the column of the table. For syntax information, see the details of the expression language used for the column in the table of the database.

A name for the address set. Names are ASCII and must match [a-zA-Z_.][a-zA-Z_.0-9]*. The set of addresses in string form. See External IDs at the beginning of this document.

Each row represents one load balancer.

A name for the load balancer. This name has no special meaning or purpose other than to provide convenience for human interaction with the ovn-nb database.

A map of virtual IPv4 addresses (and an optional port number with : as a separator) associated with this load balancer and their corresponding endpoint IPv4 addresses (and optional port numbers with : as separators) separated by commas. If the destination IP address (and port number) of a packet leaving a container or a VM matches the virtual IPv4 address (and port number) provided here as a key, then OVN will statefully replace the destination IP address by one of the provided IPv4 address (and port number) in this map as a value. Examples for keys are "192.168.1.4" and "172.16.1.8:80". Examples for value are "10.0.0.1, 10.0.0.2" and "20.0.0.10:8800, 20.0.0.11:8800".

Valid protocols are tcp or udp. This column is useful when a port number is provided as part of the vips column. If this column is empty and a port number is provided as part of vips column, OVN assumes the protocol to be tcp.

See External IDs at the beginning of this document.

Each row in this table represents one ACL rule for a logical switch that points to it through its column. The column for the highest- matching row in this table determines a packet's treatment. If no row matches, packets are allowed by default. (Default-deny treatment is possible: add a rule with 0, 0 as , and deny as .)

The ACL rule's priority. Rules with numerically higher priority take precedence over those with lower. If two ACL rules with the same priority both match, then the one actually applied to a packet is undefined.

Return traffic from an allow-related flow is always allowed and cannot be changed through an ACL.

Direction of the traffic to which this rule should apply:

The packets that the ACL should match, in the same expression language used for the column in the OVN Southbound database's table. The outport logical port is only available in the to-lport direction (the inport is available in both directions).

By default all traffic is allowed. When writing a more restrictive policy, it is important to remember to allow flows such as ARP and IPv6 neighbor discovery packets.

Note that you can not create an ACL matching on a port with type=router.

Note that when localnet port exists in a lswitch, for to-lport direction, the inport works only if the to-lport is located on the same chassis as the inport.

The action to take when the ACL rule matches:

If set to true, packets that match the ACL will trigger a log message on the transport node or nodes that perform ACL processing. Logging may be combined with any .

Logging is not yet implemented.

See External IDs at the beginning of this document.

Each row represents one L3 logical router.

A name for the logical router. This name has no special meaning or purpose other than to provide convenience for human interaction with the ovn-nb database. There is no requirement for the name to be unique. The logical router's UUID should be used as the unique identifier.

The router's ports. One or more static routes for the router. This column is used to administratively set router state. If this column is empty or is set to true, the router is enabled. If this column is set to false, the router is disabled. A disabled router has all ingress and egress traffic dropped. One or more NAT rules for the router. NAT rules only work on Gateway routers, and on distributed routers with one logical router port with a redirect-chassis specified. Load balance a virtual ipv4 address to a set of logical port ipv4 addresses. Load balancer rules only work on the Gateway routers.

Additional options for the logical router.

If set, indicates that the logical router in question is a Gateway router (which is centralized) and resides in the set chassis. The same value is also used by ovn-controller to uniquely identify the chassis in the OVN deployment and comes from external_ids:system-id in the Open_vSwitch table of Open_vSwitch database.

The Gateway router can only be connected to a distributed router via a switch if SNAT and DNAT are to be configured in the Gateway router.

If set, indicates the IP address to use to force SNAT a packet that has already been DNATed in the gateway router. When multiple gateway routers are configured, a packet can potentially enter any of the gateway router, get DNATted and eventually reach the logical switch port. For the return traffic to go back to the same gateway router (for unDNATing), the packet needs a SNAT in the first place. This can be achieved by setting the above option with a gateway specific IP address.

If set, indicates the IP address to use to force SNAT a packet that has already been load-balanced in the gateway router. When multiple gateway routers are configured, a packet can potentially enter any of the gateway router, get DNATted as part of the load- balancing and eventually reach the logical switch port. For the return traffic to go back to the same gateway router (for unDNATing), the packet needs a SNAT in the first place. This can be achieved by setting the above option with a gateway specific IP address.

See External IDs at the beginning of this document.

Each row in this table represents one QOS rule for a logical switch that points to it through its column. The column for the highest- matching row in this table determines a packet's qos marking. If no row matches, packets will not have any qos marking.

The QOS rule's priority. Rules with numerically higher priority take precedence over those with lower. If two QOS rules with the same priority both match, then the one actually applied to a packet is undefined.

The value of this field is similar to column in the OVN Northbound database's table.

The packets that the QOS rules should match, in the same expression language used for the column in the OVN Southbound database's table. The outport logical port is only available in the to-lport direction (the inport is available in both directions).

The action to be performed on the matched packet

 See External IDs at the beginning of this document.

A port within an L3 logical router.

Exactly one row must reference a given logical router port.

A name for the logical router port.

In addition to provide convenience for human interaction with the ovn-nb database, this column is used as reference by its patch port in or another logical router port in .

The IP addresses and netmasks of the router. For example, 192.168.0.1/24 indicates that the router's IP address is 192.168.0.1 and that packets destined to 192.168.0.x should be routed to this port.

A logical router port always adds a link-local IPv6 address (fe80::/64) automatically generated from the interface's MAC address using the modified EUI-64 format.

The Ethernet address that belongs to this router port. This column is used to administratively set port state. If this column is empty or is set to true, the port is enabled. If this column is set to false, the port is disabled. A disabled port has all ingress and egress traffic dropped.

Additional options for the logical router port.

If set, this indicates that this logical router port represents a distributed gateway port that connects this router to a logical switch with a localnet port. There may be at most one such logical router port on each logical router.

Even when a redirect-chassis is specified, the logical router port still effectively resides on each chassis. However, due to the implications of the use of L2 learning in the physical network, as well as the need to support advanced features such as one-to-many NAT (aka IP masquerading), a subset of the logical router processing is handled in a centralized manner on the specified redirect-chassis.

When this option is specified, the peer logical switch port's must be set to router. With this setting, the s specified in NAT rules are automatically programmed in the peer logical switch's destination lookup on the chassis where the resides. In addition, the logical router's MAC address is automatically programmed in the peer logical switch's destination lookup flow on the redirect-chassis.

A given router port serves one of two purposes:

For a router port used to connect two logical routers, this identifies the other router port in the pair by .

For a router port attached to a logical switch, this column is empty.

See External IDs at the beginning of this document.

Each record represents a static route.

When multiple routes match a packet, the longest-prefix match is chosen. For a given prefix length, a dst-ip route is preferred over a src-ip route.

IP prefix of this route (e.g. 192.168.100.0/24).

If it is specified, this setting describes the policy used to make routing decisions. This setting must be one of the following strings:

If not specified, the default is dst-ip.

Nexthop IP address for this route. Nexthop IP address should be the IP address of a connected router port or the IP address of a logical port.

The name of the via which the packet needs to be sent out. This is optional and when not specified, OVN will automatically figure this out based on the .

Each record represents a NAT rule.

Type of the NAT rule.

 An IPv4 address.

A MAC address.

This is only used on the gateway port on distributed routers. This must be specified in order for the NAT rule to be processed in a distributed manner on all chassis. If this is not specified for a NAT rule on a distributed router, then this NAT rule will be processed in a centralized manner on the gateway port instance on the redirect-chassis.

This MAC address must be unique on the logical switch that the gateway port is attached to. If the MAC address used on the is globally unique, then that MAC address can be specified as this .

An IPv4 network (e.g 192.168.1.0/24) or an IPv4 address.

The name of the logical port where the resides.

This is only used on distributed routers. This must be specified in order for the NAT rule to be processed in a distributed manner on all chassis. If this is not specified for a NAT rule on a distributed router, then this NAT rule will be processed in a centralized manner on the gateway port instance on the redirect-chassis.

OVN implements native DHCPv4 support which caters to the common use case of providing an IPv4 address to a booting instance by providing stateless replies to DHCPv4 requests based on statically configured address mappings. To do this it allows a short list of DHCPv4 options to be configured and applied at each compute host running ovn-controller.

OVN also implements native DHCPv6 support which provides stateless replies to DHCPv6 requests.

The DHCPv4/DHCPv6 options will be included if the logical port has its IP address in this .

The CMS should define the set of DHCPv4 options as key/value pairs in the column of this table. For ovn-controller to include these DHCPv4 options, the of should refer to an entry in this table.

The following options must be defined.

The IP address for the DHCP server to use. This should be in the subnet of the offered IP. This is also included in the DHCP offer as option 54, ``server identifier.'' The Ethernet address for the DHCP server to use.

The IP address of a gateway for the client to use. This should be in the subnet of the offered IP. The DHCPv4 option code for this option is 3.

The offered lease time in seconds,

The DHCPv4 option code for this option is 51.

Below are the supported DHCPv4 options whose values are an IPv4 address, e.g. 192.168.1.1. Some options accept multiple IPv4 addresses enclosed within curly braces, e.g. {192.168.1.2, 192.168.1.3}. Please refer to RFC 2132 for more details on DHCPv4 options and their codes.

The DHCPv4 option code for this option is 1.

The DHCPv4 option code for this option is 6.

The DHCPv4 option code for this option is 7.

The DHCPv4 option code for this option is 9.

The DHCPv4 option code for this option is 16.

The DHCPv4 option code for this option is 21.

The DHCPv4 option code for this option is 32.

The DHCPv4 option code for this option is 41.

The DHCPv4 option code for this option is 42.

The DHCPv4 option code for this option is 66.

The DHCPv4 option code for this option is 121.

This option can contain one or more static routes, each of which consists of a destination descriptor and the IP address of the router that should be used to reach that destination. Please see RFC 3442 for more details.

Example: {30.0.0.0/24,10.0.0.10, 0.0.0.0/0,10.0.0.1}

The DHCPv4 option code for this option is 249. This option is similar to classless_static_route supported by Microsoft Windows DHCPv4 clients.

These options accept a Boolean value, expressed as 0 for false or 1 for true.

The DHCPv4 option code for this option is 19.

The DHCPv4 option code for this option is 31.

The DHCPv4 option code for this option is 36.

These options accept a nonnegative integer value.

The DHCPv4 option code for this option is 23. The DHCPv4 option code for this option is 37. The DHCPv4 option code for this option is 26. This specifies the time interval from address assignment until the client begins trying to renew its address. The DHCPv4 option code for this option is 58. This specifies the time interval from address assignment until the client begins trying to rebind its address. The DHCPv4 option code for this option is 59.

OVN also implements native DHCPv6 support. The CMS should define the set of DHCPv6 options as key/value pairs. The define DHCPv6 options will be included in the DHCPv6 response to the DHCPv6 Solicit/Request/Confirm packet from the logical ports having the IPv6 addresses in the .

The following options must be defined.

The Ethernet address for the DHCP server to use. This is also included in the DHCPv6 reply as option 2, ``Server Identifier'' to carry a DUID identifying a server between a client and a server. ovn-controller defines DUID based on Link-layer Address [DUID-LL].

Below are the supported DHCPv6 options whose values are an IPv6 address, e.g. aef0::4. Some options accept multiple IPv6 addresses enclosed within curly braces, e.g. {aef0::4, aef0::5}. Please refer to RFC 3315 for more details on DHCPv6 options and their codes.

The DHCPv6 option code for this option is 23. This option specifies the DNS servers that the VM should use.

These options accept string values.

The DHCPv6 option code for this option is 24. This option specifies the domain search list the client should use to resolve hostnames with DNS.

Example: "ovn.org".

This option specifies the OVN native DHCPv6 will work in stateless mode, which means OVN native DHCPv6 will not offer IPv6 addresses for VM/VIF ports, but only reply other configurations, such as DNS and domain search list. When setting this option with string value "true", VM/VIF will configure IPv6 addresses by stateless way. Default value for this option is false.

See External IDs at the beginning of this document.

Configuration for a database connection to an Open vSwitch database (OVSDB) client.

This table primarily configures the Open vSwitch database server (ovsdb-server).

The Open vSwitch database server can initiate and maintain active connections to remote clients. It can also listen for database connections.

Connection methods for clients.

The following connection methods are currently supported:

ssl:ip[:port]

The specified SSL port on the host at the given ip, which must be expressed as an IP address (not a DNS name). A valid SSL configuration must be provided when this form is used, this configuration can be specified via command-line options or the table.

If port is not specified, it defaults to 6640.

SSL support is an optional feature that is not always built as part of Open vSwitch.

tcp:ip[:port]

The specified TCP port on the host at the given ip, which must be expressed as an IP address (not a DNS name), where ip can be IPv4 or IPv6 address. If ip is an IPv6 address, wrap it in square brackets, e.g. tcp:[::1]:6640.

If port is not specified, it defaults to 6640.

pssl:[port][:ip]

Listens for SSL connections on the specified TCP port. Specify 0 for port to have the kernel automatically choose an available port. If ip, which must be expressed as an IP address (not a DNS name), is specified, then connections are restricted to the specified local IP address (either IPv4 or IPv6 address). If ip is an IPv6 address, wrap in square brackets, e.g. pssl:6640:[::1]. If ip is not specified then it listens only on IPv4 (but not IPv6) addresses. A valid SSL configuration must be provided when this form is used, this can be specified either via command-line options or the table.

If port is not specified, it defaults to 6640.

SSL support is an optional feature that is not always built as part of Open vSwitch.

ptcp:[port][:ip]

Listens for connections on the specified TCP port. Specify 0 for port to have the kernel automatically choose an available port. If ip, which must be expressed as an IP address (not a DNS name), is specified, then connections are restricted to the specified local IP address (either IPv4 or IPv6 address). If ip is an IPv6 address, wrap it in square brackets, e.g. ptcp:6640:[::1]. If ip is not specified then it listens only on IPv4 addresses.

If port is not specified, it defaults to 6640.

When multiple clients are configured, the values must be unique. Duplicate values yield unspecified results.

 Maximum number of milliseconds to wait between connection attempts. Default is implementation-specific. Maximum number of milliseconds of idle time on connection to the client before sending an inactivity probe message. If Open vSwitch does not communicate with the client for the specified number of seconds, it will send a probe. If a response is not received for the same additional amount of time, Open vSwitch assumes the connection has been broken and attempts to reconnect. Default is implementation-specific. A value of 0 disables inactivity probes.

Key-value pair of is always updated. Other key-value pairs in the status columns may be updated depends on the type.

When specifies a connection method that listens for inbound connections (e.g. ptcp: or punix:), both and may also be updated while the remaining key-value pairs are omitted.

On the other hand, when specifies an outbound connection, all key-value pairs may be updated, except the above-mentioned two key-value pairs associated with inbound connection targets. They are omitted.

true if currently connected to this client, false otherwise. A human-readable description of the last error on the connection to the manager; i.e. strerror(errno). This key will exist only if an error has occurred.

The state of the connection to the manager:

VOID
Connection is disabled.
BACKOFF
Attempting to reconnect at an increasing period.
CONNECTING
Attempting to connect.
ACTIVE
Connected, remote host responsive.
IDLE
Connection is idle. Waiting for response to keep-alive.

These values may change in the future. They are provided only for human consumption.

The amount of time since this client last successfully connected to the database (in seconds). Value is empty if client has never successfully been connected. The amount of time since this client last disconnected from the database (in seconds). Value is empty if client has never disconnected. Space-separated list of the names of OVSDB locks that the connection holds. Omitted if the connection does not hold any locks. Space-separated list of the names of OVSDB locks that the connection is currently waiting to acquire. Omitted if the connection is not waiting for any locks. Space-separated list of the names of OVSDB locks that the connection has had stolen by another OVSDB client. Omitted if no locks have been stolen from this connection. When specifies a connection method that listens for inbound connections (e.g. ptcp: or pssl:) and more than one connection is actually active, the value is the number of active connections. Otherwise, this key-value pair is omitted. When is ptcp: or pssl:, this is the TCP port on which the OVSDB server is listening. (This is particularly useful when specifies a port of 0, allowing the kernel to choose any available port.) The overall purpose of these columns is described under Common Columns at the beginning of this document.
SSL configuration for ovn-nb database access. Name of a PEM file containing the private key used as the switch's identity for SSL connections to the controller. Name of a PEM file containing a certificate, signed by the certificate authority (CA) used by the controller and manager, that certifies the switch's private key, identifying a trustworthy switch. Name of a PEM file containing the CA certificate used to verify that the switch is connected to a trustworthy controller. If set to true, then Open vSwitch will attempt to obtain the CA certificate from the controller on its first SSL connection and save it to the named PEM file. If it is successful, it will immediately drop the connection and reconnect, and from then on all SSL connections must be authenticated by a certificate signed by the CA certificate thus obtained. This option exposes the SSL connection to a man-in-the-middle attack obtaining the initial CA certificate. It may still be useful for bootstrapping. The overall purpose of these columns is described under Common Columns at the beginning of this document.