AT_BANNER([OpenFlow actions]) AT_SETUP([OpenFlow 1.0 action translation]) AT_KEYWORDS([ofp-actions OF1.0]) AT_DATA([test-data], [dnl # actions=LOCAL 0000 0008 fffe 04d2 # actions=CONTROLLER:1234 0000 0008 fffd 04d2 # actions=mod_vlan_vid:9 0001 0008 0009 0000 # actions=mod_vlan_pcp:6 0002 0008 06 000000 # actions=strip_vlan 0003 0008 00000000 # actions=mod_dl_src:00:11:22:33:44:55 0004 0010 001122334455 000000000000 # actions=mod_dl_dst:10:20:30:40:50:60 0005 0010 102030405060 000000000000 # actions=mod_nw_src:1.2.3.4 0006 0008 01020304 # actions=mod_nw_dst:192.168.0.1 0007 0008 c0a80001 # actions=mod_nw_tos:48 0008 0008 30 000000 # actions=mod_tp_src:80 0009 0008 0050 0000 # actions=mod_tp_dst:443 000a 0008 01bb 0000 # actions=enqueue:10:55 000b 0010 000a 000000000000 00000037 # actions=resubmit:5 ffff 0010 00002320 0001 0005 00000000 # actions=set_tunnel:0x12345678 ffff 0010 00002320 0002 0000 12345678 # actions=set_queue:2309737729 ffff 0010 00002320 0004 0000 89abcd01 # actions=pop_queue ffff 0010 00002320 0005 000000000000 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[] ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802 # actions=load:0xf009->NXM_OF_VLAN_TCI[] ffff 0018 00002320 0007 000f 00000802 000000000000f009 # actions=note:11.e9.9a.ad.67.f3 ffff 0010 00002320 0008 11e99aad67f3 # actions=set_tunnel64:0xc426384d49c53d60 ffff 0018 00002320 0009 000000000000 c426384d49c53d60 # actions=set_tunnel64:0x885f3298 ffff 0018 00002320 0009 000000000000 00000000885f3298 # bad OpenFlow10 actions: OFPBIC_UNSUP_INST & ofp_actions|WARN|write_metadata instruction not allowed here ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff # bad OpenFlow10 actions: OFPBIC_UNSUP_INST & ofp_actions|WARN|write_metadata instruction not allowed here ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffff0000ffff0000 # actions=multipath(eth_src,50,modulo_n,1,0,NXM_NX_REG0[]) ffff 0020 00002320 000a 0000 0032 0000 0000 0000 0000 0000 0000 001f 00010004 # actions=bundle(eth_src,0,hrw,ofport,members:4,8) ffff 0028 00002320 000c 0001 0000 0000 00000002 0002 0000 00000000 00000000 dnl 0004 0008 00000000 # actions=bundle_load(eth_src,0,hrw,ofport,NXM_NX_REG0[],members:4,8) ffff 0028 00002320 000d 0001 0000 0000 00000002 0002 001f 00010004 00000000 dnl 0004 0008 00000000 # actions=resubmit(10,5) ffff 0010 00002320 000e 000a 05 000000 # actions=resubmit(10,5,ct) ffff 0010 00002320 002c 000a 05 000000 # actions=output:NXM_NX_REG1[5..10] ffff 0018 00002320 000f 0145 00010204 ffff 000000000000 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[]) ffff 0048 00002320 0010 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 dnl 000c 00000802 0000 00000802 0000 dnl 0030 00000406 0000 00000206 0000 dnl 1010 00000002 0000 dnl 00000000 # actions=exit ffff 0010 00002320 0011 000000000000 # actions=dec_ttl ffff 0010 00002320 0012 000000000000 # actions=fin_timeout(idle_timeout=10,hard_timeout=20) ffff 0010 00002320 0013 000a 0014 0000 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678) ffff 0010 00002320 0014 04d2 162e 02 00 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678,userdata=01.02.03.04.05,pause) ffff 0040 00002320 0025 000000000000 dnl 0000 0008 04d2 0000 dnl 0001 0008 162e 0000 dnl 0002 0005 02 000000 dnl 0003 0009 0102030405 00000000000000 dnl 0004 0004 00000000 # actions=dec_ttl(32768,12345,90,765,1024) ffff 0020 00002320 0015 000500000000 80003039005A02fd 0400000000000000 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678) ffff 0018 00002320 001d 3039 00005BA0 00008707 0000B26E # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678,sampling_port=56789) ffff 0020 00002320 0026 3039 00005BA0 00008707 0000B26E DDD50000 00000000 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678,sampling_port=56789,egress) ffff 0020 00002320 0029 3039 00005BA0 00008707 0000B26E DDD50200 00000000 # bad OpenFlow10 actions: OFPBAC_BAD_LEN & ofp_actions|WARN|OpenFlow action OFPAT_OUTPUT length 240 exceeds action buffer length 8 & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_LEN): & 00000000 00 00 00 f0 00 00 00 00- 00 00 00 f0 00 00 00 00 # bad OpenFlow10 actions: OFPBAC_BAD_LEN & ofp_actions|WARN|OpenFlow action OFPAT_OUTPUT length 16 not in valid range [[8,8]] & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_LEN): & 00000000 00 00 00 10 ff fe ff ff-00 00 00 00 00 00 00 00 00 00 00 10 ff fe ff ff 00 00 00 00 00 00 00 00 # bad OpenFlow10 actions: OFPBAC_BAD_LEN & ofp_actions|WARN|OpenFlow action NXAST_DEC_TTL_CNT_IDS length 17 is not a multiple of 8 ffff 0011 00002320 0015 0001 00000000 0000000000000000 # bad OpenFlow10 actions: OFPBAC_BAD_OUT_PORT 0000 0008 ffff 0000 # actions=ct() ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0000 # actions=ct(commit) ffff 0018 00002320 0023 0001 00000000 0000 FF 000000 0000 # actions=ct(commit,force) ffff 0018 00002320 0023 0003 00000000 0000 FF 000000 0000 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT ffff 0018 00002320 0023 0002 00000000 0000 FF 000000 0000 # actions=ct(table=10) ffff 0018 00002320 0023 0000 00000000 0000 0A 000000 0000 # actions=ct(zone=10) ffff 0018 00002320 0023 0000 00000000 000A FF 000000 0000 # actions=ct(zone=NXM_NX_REG0[0..15]) ffff 0018 00002320 0023 0000 00010004 000F FF 000000 0000 dnl Can't read 8 bits from register into 16-bit zone. # bad OpenFlow10 actions: OFPBAC_BAD_SET_LEN ffff 0018 00002320 0023 0000 00010004 0007 FF 000000 0000 dnl Can't read 32 bits from register into 16-bit zone. # bad OpenFlow10 actions: OFPBAC_BAD_SET_LEN ffff 0018 00002320 0023 0000 00010004 001F FF 000000 0000 # actions=ct(commit,exec(load:0xf009->NXM_NX_CT_MARK[])) ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0007 001f 0001d604 000000000000f009 # actions=ct(commit,force,exec(load:0xf009->NXM_NX_CT_MARK[])) ffff 0030 00002320 0023 0003 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0007 001f 0001d604 000000000000f009 # actions=ct(commit,exec(load:0->NXM_NX_CT_LABEL[64..127],load:0x1d->NXM_NX_CT_LABEL[0..63])) ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0007 103f 0001d810 0000 0000 0000 0000 dnl ffff 0018 00002320 0007 003f 0001d810 0000 0000 0000 001d # bad OpenFlow10 actions: OFPBAC_BAD_SET_ARGUMENT & ofp_actions|WARN|cannot set CT fields outside of ct action ffff 0018 00002320 0007 001f 0001d604 000000000000f009 # bad OpenFlow10 actions: OFPBAC_BAD_SET_ARGUMENT & meta_flow|WARN|destination field ct_zone is not writable ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0007 000f 0001d504 000000000000f009 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT & ofp_actions|WARN|ct action doesn't support nested action ct ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0000 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT & ofp_actions|WARN|ct action doesn't support nested modification of reg0 ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0007 001f 00010004 000000000000f009 # actions=ct(alg=ftp) ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0015 # actions=ct(alg=tftp) ffff 0018 00002320 0023 0000 00000000 0000 FF 000000 0045 # actions=ct(commit,nat(src)) ffff 0028 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0010 00002320 0024 00 00 0001 0000 # actions=ct(commit,nat(dst)) ffff 0028 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0010 00002320 0024 00 00 0002 0000 # actions=ct(nat) ffff 0028 00002320 0023 0000 00000000 0000 FF 000000 0000 dnl ffff 0010 00002320 0024 00 00 0000 0000 # actions=ct(commit,nat(src=10.0.0.240,random)) ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0024 00 00 0011 0001 0a0000f0 00000000 # actions=ct(commit,nat(src=10.0.0.240:32768-65535,random)) ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0024 00 00 0011 0031 0a0000f0 8000ffff # actions=ct(commit,nat(dst=10.0.0.128-10.0.0.254,hash)) ffff 0030 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0018 00002320 0024 00 00 000a 0003 0a000080 0a0000fe # actions=ct(commit,nat(src=10.0.0.240-10.0.0.254:32768-65535,persistent)) ffff 0038 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0020 00002320 0024 00 00 0005 0033 0a0000f0 0a0000fe 8000ffff 00000000 # actions=ct(commit,nat(src=fe80::20c:29ff:fe88:a18b,random)) ffff 0038 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0020 00002320 0024 00 00 0011 0004 fe800000 00000000 020c 29ff fe88 a18b # actions=ct(commit,nat(src=fe80::20c:29ff:fe88:1-fe80::20c:29ff:fe88:a18b,random)) ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0030 00002320 0024 00 00 0011 000c fe800000 00000000 020c 29ff fe88 0001 fe800000 00000000 020c 29ff fe88 a18b # actions=ct(commit,nat(src=[fe80::20c:29ff:fe88:1]-[fe80::20c:29ff:fe88:a18b]:255-4096,random)) ffff 0050 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0038 00002320 0024 00 00 0011 003c dnl fe800000 00000000 020c 29ff fe88 0001 dnl fe800000 00000000 020c 29ff fe88 a18b dnl 00ff1000 00000000 # actions=ct_clear ffff 0010 00002320 002b 000000000000 # actions=output(port=1,max_len=100) ffff 0010 00002320 0027 0001 00000064 # actions=clone(mod_vlan_vid:5,output:10) ffff 0020 00002320 002a 000000000000 dnl 0001 0008 0005 0000 dnl 0000 0008 000a 0000 # actions=learn(table=2,priority=0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[]) ffff 0050 00002320 002d 0000 0000 0000 0000000000000000 0000 02 00 0000 0000 00000000 0000 0000 dnl 000c 00000802 0000 00000802 0000 dnl 0030 00000406 0000 00000206 0000 dnl 1010 00000002 0000 dnl 00000000 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,limit=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[]) ffff 0050 00002320 002d 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 00000001 0000 0000 dnl 000c 00000802 0000 00000802 0000 dnl 0030 00000406 0000 00000206 0000 dnl 1010 00000002 0000 dnl 00000000 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,limit=1,result_dst=NXM_NX_REG0[8],NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[]) ffff 0050 00002320 002d 000a 0014 0050 123456789abcdef0 0004 02 00 0002 0004 00000001 0008 0000 dnl 00010004 dnl 000c 00000802 0000 00000802 0000 dnl 0030 00000406 0000 00000206 0000 dnl 1010 00000002 0000 # actions=group:5 ffff 0010 00002320 0028 0000 00000005 # bad OpenFlow10 actions: NXBRC_MUST_BE_ZERO ffff 0018 00002320 0025 0000 0005 0000 1122334455 000005 # bad OpenFlow10 actions: NXBRC_MUST_BE_ZERO ffff 0018 00002320 0025 0000 0005 5000 1122334455 000000 # bad OpenFlow10 actions: OFPBAC_BAD_ARGUMENT ffff 0048 00002320 0023 0001 00000000 0000 FF 000000 0000 dnl ffff 0030 00002320 0024 00 00 0011 000c fe800000 00000000 020c 29ff fe88 a18b fe800000 00000000 020c 29ff fe88 0001 # actions=check_pkt_larger(1500)->NXM_NX_REG0[0] ffff 0018 00002320 0031 05dc 000000010004000000000000 # actions=check_pkt_larger(1000)->NXM_NX_XXREG1[4] ffff 0018 00002320 0031 03e8 00040001e010000000000000 # actions=delete_field:tun_metadata10 ffff 0018 00002320 0032 00 01 64 7c 00 00 00 00 000000000000 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow10 < input.txt], [0], [expout], [experr]) AT_CHECK([cat expout | grep 'actions=' | test-ofparse.py]) AT_CLEANUP AT_SETUP([OpenFlow 1.0 "instruction" translations]) AT_KEYWORDS([ofp-actions OF1.0 instruction]) AT_DATA([test-data], [dnl dnl Try a couple of ordinary actions to make sure they're accepted, dnl but there's no point in retrying all the actions from the previous test. # actions=LOCAL 0000 0008 fffe 04d2 # actions=mod_dl_src:00:11:22:33:44:55 0004 0010 001122334455 000000000000 dnl Now check that write_metadata is accepted. # actions=write_metadata:0xfedcba9876543210 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff # actions=write_metadata:0xfedcba9876543210/0xffff0000ffff0000 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffff0000ffff0000 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-instructions OpenFlow10 < input.txt], [0], [expout], [experr]) AT_CHECK([cat expout | grep 'actions=' | test-ofparse.py]) AT_CLEANUP AT_SETUP([OpenFlow 1.1 action translation]) AT_KEYWORDS([ofp-actions OF1.1]) AT_DATA([test-data], [dnl # actions=LOCAL 0000 0010 fffffffe 04d2 000000000000 # actions=CONTROLLER:1234 0000 0010 fffffffd 04d2 000000000000 # actions=set_vlan_vid:9 0001 0008 0009 0000 # actions=set_vlan_pcp:6 0002 0008 06 000000 # actions=mod_dl_src:00:11:22:33:44:55 0003 0010 001122334455 000000000000 # actions=mod_dl_dst:10:20:30:40:50:60 0004 0010 102030405060 000000000000 # actions=mod_nw_src:1.2.3.4 0005 0008 01020304 # actions=mod_nw_dst:192.168.0.1 0006 0008 c0a80001 # actions=mod_nw_tos:48 0007 0008 30 000000 # actions=mod_nw_ecn:2 0008 0008 02 000000 # actions=mod_tp_src:80 0009 0008 0050 0000 # actions=mod_tp_dst:443 000a 0008 01bb 0000 # actions=pop_vlan 0012 0008 00000000 # actions=set_queue:2309737729 0015 0008 89abcd01 dnl 802.1ad isn't supported at the moment dnl # actions=push_vlan:0x88a8 dnl 0011 0008 88a8 0000 # actions=push_vlan:0x8100 0011 0008 8100 0000 # actions=resubmit:5 ffff 0010 00002320 0001 0005 00000000 # actions=set_tunnel:0x12345678 ffff 0010 00002320 0002 0000 12345678 # actions=pop_queue ffff 0010 00002320 0005 000000000000 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[] ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802 # actions=load:0xf009->NXM_OF_VLAN_TCI[] ffff 0018 00002320 0007 000f 00000802 000000000000f009 # actions=note:11.e9.9a.ad.67.f3 ffff 0010 00002320 0008 11e99aad67f3 # actions=set_tunnel64:0xc426384d49c53d60 ffff 0018 00002320 0009 000000000000 c426384d49c53d60 # actions=set_tunnel64:0x885f3298 ffff 0018 00002320 0009 000000000000 00000000885f3298 dnl Write-Metadata is only allowed in contexts that allow instructions. & ofp_actions|WARN|write_metadata instruction not allowed here # bad OpenFlow11 actions: OFPBIC_UNSUP_INST ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff # actions=multipath(eth_src,50,modulo_n,1,0,NXM_NX_REG0[]) ffff 0020 00002320 000a 0000 0032 0000 0000 0000 0000 0000 0000 001f 00010004 # actions=bundle(eth_src,0,hrw,ofport,members:4,8) ffff 0028 00002320 000c 0001 0000 0000 00000002 0002 0000 00000000 00000000 dnl 0004 0008 00000000 # actions=bundle_load(eth_src,0,hrw,ofport,NXM_NX_REG0[],members:4,8) ffff 0028 00002320 000d 0001 0000 0000 00000002 0002 001f 00010004 00000000 dnl 0004 0008 00000000 # actions=resubmit(10,5) ffff 0010 00002320 000e 000a 05 000000 # actions=resubmit(10,5,ct) ffff 0010 00002320 002c 000a 05 000000 # actions=output:NXM_NX_REG1[5..10] ffff 0018 00002320 000f 0145 00010204 ffff 000000000000 # actions=learn(table=2,idle_timeout=10,hard_timeout=20,fin_idle_timeout=2,fin_hard_timeout=4,priority=80,cookie=0x123456789abcdef0,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[]) ffff 0048 00002320 0010 000a 0014 0050 123456789abcdef0 0000 02 00 0002 0004 dnl 000c 00000802 0000 00000802 0000 dnl 0030 00000406 0000 00000206 0000 dnl 1010 00000002 0000 dnl 00000000 # actions=exit ffff 0010 00002320 0011 000000000000 dnl OpenFlow 1.1 OFPAT_DEC_TTL # actions=dec_ttl 0018 0008 00000000 # actions=fin_timeout(idle_timeout=10,hard_timeout=20) ffff 0010 00002320 0013 000a 0014 0000 # actions=controller(reason=invalid_ttl,max_len=1234,id=5678) ffff 0010 00002320 0014 04d2 162e 02 00 # actions=dec_ttl(32768,12345,90,765,1024) ffff 0020 00002320 0015 000500000000 80003039005A02fd 0400000000000000 # actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_point_id=45678) ffff 0018 00002320 001d 3039 00005BA0 00008707 0000B26E # bad OpenFlow11 actions: OFPBAC_BAD_OUT_PORT & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_OUT_PORT): & 00000000 00 00 00 10 ff ff ff ff-00 00 00 00 00 00 00 00 0000 0010 ffffffff 0000 000000000000 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow11 < input.txt], [0], [expout], [experr]) AT_CHECK([cat expout | grep 'actions=' | test-ofparse.py]) AT_CLEANUP AT_SETUP([OpenFlow 1.1 instruction translation]) AT_KEYWORDS([OF1.1 instruction ofp-actions]) AT_DATA([test-data], [dnl # actions=LOCAL 0004 0018 00000000 dnl 0000 0010 fffffffe 04d2 000000000000 dnl Apply-Actions non-zero padding # actions=drop # 0: 00 -> (none) # 1: 04 -> (none) # 2: 00 -> (none) # 3: 08 -> (none) # 4: 00 -> (none) # 5: 00 -> (none) # 6: 00 -> (none) # 7: 01 -> (none) 0004 0008 00000001 dnl Check that an empty Apply-Actions instruction gets dropped. # actions=drop # 0: 00 -> (none) # 1: 04 -> (none) # 2: 00 -> (none) # 3: 08 -> (none) # 4: 00 -> (none) # 5: 00 -> (none) # 6: 00 -> (none) # 7: 00 -> (none) 0004 0008 00000000 dnl Duplicate instruction type: # bad OpenFlow11 instructions: OFPBIC_DUP_INST 0004 0008 00000000 0004 0008 00000000 dnl Instructions not multiple of 8 in length. & ofp_actions|WARN|OpenFlow message instructions length 9 is not a multiple of 8 # bad OpenFlow11 instructions: OFPBIC_BAD_LEN 0004 0009 01 00000000 dnl Goto-Table instruction too long. # bad OpenFlow11 instructions: OFPBIC_BAD_LEN 0001 0010 01 000000 0000000000000000 dnl Goto-Table 1 instruction non-zero padding # actions=goto_table:1 # 7: 01 -> 00 0001 0008 01 000001 dnl Goto-Table 1 instruction go back to the previous table. # bad OpenFlow11 instructions: OFPBIC_BAD_TABLE_ID 2,0001 0008 01 000000 dnl Goto-Table 1 # actions=goto_table:1 0001 0008 01 000000 dnl Write-Metadata. # actions=write_metadata:0xfedcba9876543210 0002 0018 00000000 fedcba9876543210 ffffffffffffffff dnl Write-Metadata as Nicira extension action is transformed into instruction. # actions=write_metadata:0xfedcba9876543210 # 1: 04 -> 02 # 3: 28 -> 18 # 8: ff -> fe # 9: ff -> dc # 10: 00 -> ba # 11: 20 -> 98 # 12: 00 -> 76 # 13: 00 -> 54 # 14: 23 -> 32 # 15: 20 -> 10 # 16: 00 -> ff # 17: 16 -> ff # 18: 00 -> ff # 19: 00 -> ff # 20: 00 -> ff # 21: 00 -> ff # 22: 00 -> ff # 23: 00 -> ff # 24: fe -> (none) # 25: dc -> (none) # 26: ba -> (none) # 27: 98 -> (none) # 28: 76 -> (none) # 29: 54 -> (none) # 30: 32 -> (none) # 31: 10 -> (none) # 32: ff -> (none) # 33: ff -> (none) # 34: ff -> (none) # 35: ff -> (none) # 36: ff -> (none) # 37: ff -> (none) # 38: ff -> (none) # 39: ff -> (none) 0004 0028 00000000 ffff 0020 00002320 0016 000000000000 fedcba9876543210 ffffffffffffffff dnl Write-Metadata with mask. # actions=write_metadata:0xfedcba9876543210/0xff00ff00ff00ff00 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00 dnl Write-Metadata too short. # bad OpenFlow11 instructions: OFPBIC_BAD_LEN 0002 0010 00000000 fedcba9876543210 dnl Write-Metadata too long. # bad OpenFlow11 instructions: OFPBIC_BAD_LEN 0002 0020 00000000 fedcba9876543210 ffffffffffffffff 0000000000000000 dnl Write-Metadata duplicated. # bad OpenFlow11 instructions: OFPBIC_DUP_INST 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00 0002 0018 00000000 fedcba9876543210 ff00ff00ff00ff00 dnl Write-Metadata in wrong position (OpenFlow 1.1+ disregards the order dnl and OVS reorders it to the canonical order) # actions=write_metadata:0xfedcba9876543210,goto_table:1 # 1: 01 -> 02 # 3: 08 -> 18 # 4: 01 -> 00 # 8: 00 -> fe # 9: 02 -> dc # 10: 00 -> ba # 11: 18 -> 98 # 12: 00 -> 76 # 13: 00 -> 54 # 14: 00 -> 32 # 15: 00 -> 10 # 16: fe -> ff # 17: dc -> ff # 18: ba -> ff # 19: 98 -> ff # 20: 76 -> ff # 21: 54 -> ff # 22: 32 -> ff # 23: 10 -> ff # 24: ff -> 00 # 25: ff -> 01 # 26: ff -> 00 # 27: ff -> 08 # 28: ff -> 01 # 29: ff -> 00 # 30: ff -> 00 # 31: ff -> 00 0001 0008 01 000000 0002 0018 00000000 fedcba9876543210 ffffffffffffffff dnl empty Write-Actions non-zero padding # actions=write_actions(drop) # 0: 00 -> (none) # 1: 03 -> (none) # 2: 00 -> (none) # 3: 08 -> (none) # 4: 00 -> (none) # 5: 00 -> (none) # 6: 00 -> (none) # 7: 01 -> (none) 0003 0008 00000001 dnl Check that an empty Write-Actions instruction gets dropped. # actions=write_actions(drop) # 0: 00 -> (none) # 1: 03 -> (none) # 2: 00 -> (none) # 3: 08 -> (none) # 4: 00 -> (none) # 5: 00 -> (none) # 6: 00 -> (none) # 7: 00 -> (none) 0003 0008 00000000 dnl Clear-Actions too-long # bad OpenFlow11 instructions: OFPBIC_BAD_LEN 0005 0010 00000000 0000000000000000 dnl Clear-Actions non-zero padding # actions=clear_actions # 7: 01 -> 00 0005 0008 00000001 dnl Clear-Actions non-zero padding # actions=clear_actions # 4: 01 -> 00 0005 0008 01 000000 dnl Clear-Actions # actions=clear_actions 0005 0008 00000000 dnl Experimenter actions not supported yet. # bad OpenFlow11 instructions: OFPBIC_BAD_EXPERIMENTER ffff 0008 01 000000 dnl Bad instruction number (0 not assigned). # bad OpenFlow11 instructions: OFPBIC_UNKNOWN_INST 0000 0008 01 000000 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-instructions OpenFlow11 < input.txt], [0], [expout], [experr]) AT_CLEANUP dnl Our primary goal here is to verify OpenFlow 1.2-specific changes, dnl so the list of tests is short. AT_SETUP([OpenFlow 1.2 action translation]) AT_KEYWORDS([ofp-actions OF1.2]) AT_DATA([test-data], [dnl # actions=LOCAL 0000 0010 fffffffe 04d2 000000000000 # bad OpenFlow12 actions: OFPBAC_BAD_SET_MASK & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_MASK): & 00000000 00 19 00 18 80 00 09 0c-00 00 00 00 12 34 00 00 & 00000010 00 00 ff ff 00 00 00 00- 0019 0018 8000090c 000000001234 00000000ffff 00000000 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow12 < input.txt], [0], [expout], [experr]) AT_CHECK([cat expout | grep 'actions=' | test-ofparse.py]) AT_CLEANUP dnl Our primary goal here is to verify OpenFlow 1.3-specific changes, dnl so the list of tests is short. AT_SETUP([OpenFlow 1.3 action translation]) AT_KEYWORDS([ofp-actions OF1.3]) AT_DATA([test-data], [dnl # actions=LOCAL 0000 0010 fffffffe 04d2 000000000000 dnl Check the Nicira extension form of "move". # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[] ffff 0018 00002320 0006 0010 0000 0000 00000002 00000802 dnl Check the ONF extension form of "copy_field". # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[] ffff 0020 4f4e4600 0c80 0000 0010 0000 0000 0000 00000002 00000802 00000000 dnl Check OpenFlow v1.3.4 Conformance Test: 430.500. # bad OpenFlow13 actions: OFPBAC_BAD_SET_TYPE & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_TYPE): & 00000000 00 19 00 08 80 00 fe 00-00 00 00 10 00 00 00 01 & 00000010 00 00 00 00 00 00 00 00- 0019 0008 8000fe00 000000100000 000100000000 00000000 dnl Check OpenFlow v1.3.4 Conformance Test: 430.510. # bad OpenFlow13 actions: OFPBAC_BAD_SET_LEN & ofp_actions|WARN|bad action at offset 0 (OFPBAC_BAD_SET_LEN): & 00000000 00 19 00 10 80 00 08 07-00 01 02 03 04 05 00 00 & 00000010 00 00 00 10 00 00 00 01- 0019 0010 80000807 000102030405 000000000010 00000001 dnl Check NSH encap (experimenter extension). # actions=encap(nsh(md_type=1)) ffff 0018 00002320 002e 0000 0001894f 0004 01 05 01 000000 dnl NSH encap with non-zero padding. # actions=encap(nsh(md_type=1)) # 21: 12 -> 00 # 22: 34 -> 00 # 23: 56 -> 00 ffff 0018 00002320 002e 0000 0001894f 0004 01 05 01 123456 dnl Check mpls encap # actions=encap(mpls) ffff 0010 00002320 002e 0000 00018847 dnl Check mpls encap # actions=encap(mpls_mc) ffff 0010 00002320 002e 0000 00018848 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow13 < input.txt], [0], [expout], [experr]) AT_CHECK([cat expout | grep 'actions=' | test-ofparse.py]) AT_CLEANUP dnl Our primary goal here is to verify that OpenFlow 1.5-specific changes, dnl so the list of tests is short. AT_SETUP([OpenFlow 1.5 action translation]) AT_KEYWORDS([ofp-actions OF1.5]) AT_DATA([test-data], [dnl # actions=LOCAL 0000 0010 fffffffe 04d2 000000000000 # actions=move:NXM_OF_IN_PORT[]->NXM_OF_VLAN_TCI[] 001c 0018 0010 0000 0000 0000 00000002 00000802 00000000 # actions=set_field:00:00:00:00:12:34/00:00:00:00:ff:ff->eth_src 0019 0018 8000090c 000000001234 00000000ffff 00000000 # actions=meter:5 001d 0008 00000005 ]) sed '/^[[#&]]/d' < test-data > input.txt sed -n 's/^# //p; /^$/p' < test-data > expout sed -n 's/^& //p' < test-data > experr AT_CAPTURE_FILE([input.txt]) AT_CAPTURE_FILE([expout]) AT_CAPTURE_FILE([experr]) AT_CHECK( [ovs-ofctl '-vPATTERN:console:%c|%p|%m' parse-actions OpenFlow15 < input.txt], [0], [expout], [experr]) AT_CHECK([cat expout | grep 'actions=' | test-ofparse.py]) AT_CLEANUP AT_SETUP([ofp-actions - inconsistent MPLS actions]) OVS_VSWITCHD_START dnl OK: Use fin_timeout action on TCP flow AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=fin_timeout(idle_timeout=1)']) AT_CHECK([echo 'tcp actions=fin_timeout(idle_timeout=1)' | test-ofparse.py]) dnl Bad: Use fin_timeout action on TCP flow that has been converted to MPLS AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=push_mpls:0x8847,fin_timeout(idle_timeout=1)'], [1], [], [dnl ovs-ofctl: none of the usable flow formats (OpenFlow10,NXM) is among the allowed flow formats (OpenFlow11) ]) AT_CHECK([echo 'tcp actions=push_mpls:0x8847,fin_timeout(idle_timeout=1)' | test-ofparse.py]) OVS_VSWITCHD_STOP AT_CLEANUP AT_SETUP([reg_load <-> set_field translation corner case]) AT_KEYWORDS([ofp-actions]) OVS_VSWITCHD_START dnl In OpenFlow 1.3, set_field always sets all the bits in the field, dnl but when we translate to NXAST_LOAD we need to only set the bits that dnl actually exist (e.g. mpls_label only has 20 bits) otherwise OVS rejects dnl the "load" action as invalid. Check that we do this correctly. AT_CHECK([ovs-ofctl -O OpenFlow13 add-flow br0 mpls,actions=set_field:10-\>mpls_label]) AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl NXST_FLOW reply: mpls actions=load:0xa->OXM_OF_MPLS_LABEL[[]] ]) AT_CHECK([echo 'mpls actions=set_field:10->mpls_label' | test-ofparse.py]) AT_CHECK([echo 'mpls actions=load:0xa->OXM_OF_MPLS_LABEL[[]]'| test-ofparse.py]) OVS_VSWITCHD_STOP AT_CLEANUP AT_SETUP([enqueue action for OF1.1+]) AT_KEYWORDS([ofp-actions]) OVS_VSWITCHD_START dnl OpenFlow 1.0 has an "enqueue" action. For OpenFlow 1.1+, we translate dnl it to a series of actions that accomplish the same thing. AT_CHECK([ovs-ofctl -O OpenFlow10 add-flow br0 'actions=enqueue(123,456)']) AT_CHECK([echo 'actions=enqueue(123,456)' | test-ofparse.py]) AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl NXST_FLOW reply: actions=enqueue:123:456 ]) AT_CHECK([echo 'actions=enqueue:123:456' | test-ofparse.py]) AT_CHECK([ovs-ofctl -O OpenFlow13 dump-flows br0 | ofctl_strip], [0], [dnl OFPST_FLOW reply (OF1.3): reset_counts actions=set_queue:456,output:123,pop_queue ]) AT_CHECK([echo 'actions=set_queue:456,output:123,pop_queue' | test-ofparse.py]) OVS_VSWITCHD_STOP AT_CLEANUP AT_SETUP([mod_nw_ttl action for OF1.0]) AT_KEYWORDS([ofp-actions]) OVS_VSWITCHD_START dnl OpenFlow 1.1+ have a mod_nw_ttl action. For OpenFlow 1.0, we translate dnl it to an Open vSwitch extension. AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 'ip,actions=mod_nw_ttl:123']) AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl NXST_FLOW reply: ip actions=load:0x7b->NXM_NX_IP_TTL[[]] ]) AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl OFPST_FLOW reply (OF1.1): ip actions=mod_nw_ttl:123 ]) AT_CHECK([echo 'ip,actions=mod_nw_ttl:123' | test-ofparse.py]) AT_CHECK([echo 'ip actions=load:0x7b->NXM_NX_IP_TTL[[]]' | test-ofparse.py]) OVS_VSWITCHD_STOP AT_CLEANUP AT_SETUP([mod_nw_ecn action translation]) AT_KEYWORDS([ofp-actions]) OVS_VSWITCHD_START dnl OpenFlow 1.1, but no other version, has a "mod_nw_ecn" action. dnl Check that we translate it properly for OF1.0 and OF1.2. dnl (OF1.3+ should be the same as OF1.2.) AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 'ip,actions=mod_nw_ecn:2']) AT_CHECK([echo 'ip,actions=mod_nw_ecn:2' | test-ofparse.py]) AT_CHECK([ovs-ofctl -O OpenFlow10 dump-flows br0 | ofctl_strip], [0], [dnl NXST_FLOW reply: ip actions=load:0x2->NXM_NX_IP_ECN[[]] ]) AT_CHECK([echo 'ip actions=load:0x2->NXM_NX_IP_ECN[[]]' | test-ofparse.py]) AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl OFPST_FLOW reply (OF1.1): ip actions=mod_nw_ecn:2 ]) AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [dnl OFPST_FLOW reply (OF1.2): ip actions=set_field:2->nw_ecn ]) AT_CHECK([echo 'ip actions=set_field:2->nw_ecn' | test-ofparse.py]) dnl Check that OF1.2+ set_field to set ECN is translated into the OF1.1 dnl mod_nw_ecn action. dnl dnl We don't do anything equivalent for OF1.0 reg_load because we prefer dnl that anything that comes in as reg_load gets translated back to reg_load dnl on output. Perhaps this is somewhat inconsistent but it's what OVS dnl has done for multiple versions. AT_CHECK([ovs-ofctl del-flows br0]) AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 'ip,actions=set_field:2->ip_ecn']) AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl OFPST_FLOW reply (OF1.1): ip actions=mod_nw_ecn:2 ]) dnl Check that OF1.2+ set_field to set ECN is translated for earlier OF dnl versions. AT_CHECK([ovs-ofctl del-flows br0]) AT_CHECK([ovs-ofctl -O OpenFlow10 add-flow br0 'ip,actions=set_field:2->ip_ecn']) AT_CHECK([ovs-ofctl del-flows br0]) AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 'ip,actions=set_field:2->ip_ecn']) OVS_VSWITCHD_STOP AT_CLEANUP AT_SETUP([action parsing errors]) bad_action () { AT_CHECK_UNQUOTED([ovs-ofctl parse-flow "actions=$1"], [1], [], [ovs-ofctl: $2 ]) } # output bad_action 'output(port=xyzzy,max_len=5)' \ "output to unknown truncate port: xyzzy" bad_action 'output(port=all,max_len=64)' \ "output to unsupported truncate port: all" bad_action 'output(port=local,max_len=64,foo=bar)' \ "invalid key 'foo' in output_trunc argument" bad_action 'output(port=local,max_len=5)' \ "max_len 5 is less than the minimum value 14" # controller bad_action 'controller(reason=asdf)' 'unknown reason "asdf"' bad_action 'controller(foo=bar)' 'unknown key "foo" parsing controller action' bad_action 'controller(userdata=123x456)' \ 'bad hex digit in `controller'\'' action `userdata'\' # enqueue bad_action 'enqueue:123' \ '"enqueue" syntax is "enqueue:PORT:QUEUE" or "enqueue(PORT,QUEUE)"' bad_action 'enqueue:asdf:123' 'asdf: enqueue to unknown port' # bundle bad_action 'bundle:123' '123: not enough arguments to bundle action' bad_action 'bundle(symmetric_l4,60,hrw,ofport,ports:1,2,3,4,5)' \ "symmetric_l4,60,hrw,ofport,ports:1,2,3,4,5: missing member delimiter, expected \`members', got \`ports'" bad_action 'bundle(symmetric_l4,60,hrw,ofport,members:xyzzy,2,3,4,5)' \ 'xyzzy: bad port number' bad_action 'bundle(asymmetric_l4,60,hrw,ofport,members:1,2,3,4,5)' \ "asymmetric_l4,60,hrw,ofport,members:1,2,3,4,5: unknown fields \`asymmetric_l4'" bad_action 'bundle(symmetric_l4,60,hrt,ofport,members:1,2,3,4,5)' \ "symmetric_l4,60,hrt,ofport,members:1,2,3,4,5: unknown algorithm \`hrt'" bad_action 'bundle(symmetric_l4,60,hrw,odpport,members:1,2,3,4,5)' \ "symmetric_l4,60,hrw,odpport,members:1,2,3,4,5: unknown member_type \`odpport'" bad_action 'bundle_load(symmetric_l4,60,hrw,ofport,actset_output,members:1,2,3,4,5)' \ "symmetric_l4,60,hrw,ofport,actset_output,members:1,2,3,4,5: experimenter OXM field 'actset_output' not supported" # mod_vlan_vid bad_action 'mod_vlan_vid:6000' '6000: not a valid VLAN VID' # mod_vlan_pcp bad_action 'mod_vlan_pcp:8' '8: not a valid VLAN PCP' # push_vlan bad_action 'push_vlan(0x1234)' '0x1234: not a valid VLAN ethertype' # mod_nw_tos bad_action 'mod_nw_tos(1)' '1: not a valid TOS' # mod_nw_ecn bad_action 'mod_nw_ecn(5)' '5: not a valid ECN' # set_field bad_action 'set_field:1' "1: missing \`->'" bad_action 'set_field:1->' "1->: missing field name following \`->'" bad_action 'set_field:1->x' 'x is not a valid OXM field name' bad_action 'set_field:1->eth_type' 'eth_type is read-only' bad_action 'set_field:1->eth_src' '1: invalid Ethernet address' bad_action 'set_field:0xffff->ip_dscp' '0xffff: value too large for 1-byte field ip_dscp' bad_action 'set_field:0xff->ip_dscp' '0xff is not a valid value for field ip_dscp' # reg_load bad_action 'load:xyzzy->eth_src' 'xyzzy->eth_src: cannot parse integer value' bad_action 'load:0xff->eth_src[[1..5]]' '0xff->eth_src[[1..5]]: value 00:00:00:00:00:ff does not fit into 5 bits' # push/pop bad_action 'push(eth_dst[[]]x)' 'x: trailing garbage following push or pop' # dec_ttl bad_action 'dec_ttl(,)' 'dec_ttl_cnt_ids: expected at least one controller id.' # set_mpls_label bad_action 'set_mpls_label' 'set_mpls_label: expected label.' # set_mpls_label oversized bad_action 'set_mpls_label(0x100000)' '0x100000: not a valid MPLS label' # set_mpls_tc bad_action 'set_mpls_tc' 'set_mpls_tc: expected tc.' # set_mpls_tc oversized bad_action 'set_mpls_tc(8)' '8: not a valid MPLS TC' # set_mpls_ttl bad_action 'set_mpls_ttl' 'set_mpls_ttl: expected ttl.' # set_mpls_ttl oversized bad_action 'set_mpls_ttl(256)' 'invalid MPLS TTL "256"' # fin_timeout bad_action 'fin_timeout(foo=bar)' "invalid key 'foo' in 'fin_timeout' argument" # encap bad_action 'encap(,)' 'Missing encap hdr: ,' bad_action 'encap(x(y))' 'Encap hdr not supported: y' bad_action 'encap(nsh(type=1))' 'Invalid property: type' bad_action 'encap(nsh(md_type))' 'Value missing for encap property' bad_action 'encap(nsh(md_type=3))' 'invalid md_type' bad_action 'encap(nsh(tlv(,,)))' 'Invalid NSH TLV header: ,,' # decap bad_action 'decap(packet_type(x))' 'Missing packet_type attribute ns' bad_action 'decap(packet_type(ns=99))' 'Unsupported ns value: 99' bad_action 'decap(packet_type(ns=0))' 'Missing packet_type attribute type' bad_action 'decap(foo=bar)' 'Invalid decap argument: foo' # resubmit bad_action 'resubmit(asdf)' 'asdf: resubmit to unknown port' bad_action 'resubmit(,asdf)' 'asdf: resubmit to unknown table' bad_action 'resubmit(1,2,xyzzy)' 'xyzzy: unknown parameter' bad_action 'resubmit(in_port,255)' 'at least one "in_port" or "table" must be specified on resubmit' # learn bad_action 'learn(load:123->actset_output)' \ "123->actset_output: experimenter OXM field 'actset_output' not supported" bad_action 'learn(load:1234->eth_dst[[0..5]])' \ '1234->eth_dst[[0..5]]: value does not fit into 6 bits' bad_action 'learn(actset_output=0x1000)' \ "actset_output=0x1000: experimenter OXM field 'actset_output' not supported" bad_action 'learn(eth_type[[5]]=xyzzy)' \ "eth_type[[5]]=xyzzy: eth_type[[5]] value xyzzy cannot be parsed as a subfield (xyzzy: unknown field \`xyzzy') or an immediate value (eth_type[[5]]=xyzzy: cannot parse integer value)" bad_action 'learn(eth_type[[0]]=eth_type[[1..2]])' \ 'eth_type[[0]]=eth_type[[1..2]]: bit widths of eth_type[[0]] (2) and eth_type[[1..2]] (1) differ' bad_action 'learn(load:->)' "load: missing source before \`->' in \`->'" bad_action 'learn(load:x)' "load: missing \`->' in \`x'" bad_action 'learn(load:1x->foo)' "load: garbage before \`->' in \`1x->foo'" bad_action 'learn(foo)' 'foo: unknown keyword foo' bad_action 'learn(table=foo)' 'unknown table "foo"' bad_action 'learn(table=255)' "table=255: table id 255 not valid for \`learn' action" bad_action 'learn(result_dst=tcp_flags)' 'tcp_flags is read-only' bad_action 'learn(result_dst=eth_dst)' "result_dst in 'learn' action must be a single bit" # conjunction bad_action 'conjunction(1, 1/1)' 'conjunction must have at least 2 clauses' bad_action 'conjunction(1, 1/65)' 'conjunction must have at most 64 clauses' bad_action 'conjunction(1, 0/2)' 'clause index must be positive' bad_action 'conjunction(1, 3/2)' \ 'clause index must be less than or equal to number of clauses' # multipath bad_action 'multipath(1,2,3,4)' \ '1,2,3,4: not enough arguments to multipath action' bad_action 'multipath(xyzzy,50,modulo_n,1,0,NXM_NX_REG0[[]])' \ "xyzzy,50,modulo_n,1,0,NXM_NX_REG0[[]]: unknown fields \`xyzzy'" bad_action 'multipath(eth_src,50,fubar,1,0,NXM_NX_REG0[[]])' \ "eth_src,50,fubar,1,0,NXM_NX_REG0[[]]: unknown algorithm \`fubar'" bad_action 'multipath(eth_src,50,modulo_n,0,0,NXM_NX_REG0[[]])' \ "eth_src,50,modulo_n,0,0,NXM_NX_REG0[[]]: n_links 0 is not in valid range 1 to 65536" bad_action 'multipath(eth_src,50,modulo_n,1024,0,actset_output)' \ "eth_src,50,modulo_n,1024,0,actset_output: experimenter OXM field 'actset_output' not supported" bad_action 'multipath(eth_src,50,modulo_n,1024,0,NXM_NX_REG0[[0..7]])' \ "eth_src,50,modulo_n,1024,0,NXM_NX_REG0[[0..7]]: 8-bit destination field has 256 possible values, less than specified n_links 1024" # note bad_action 'note:x' "bad hex digit in \`note' argument" # unroll_xlate bad_action 'unroll_xlate' "UNROLL is an internal action that shouldn't be used via OpenFlow" # sample bad_action 'sample(probability=0)' 'invalid probability value "0"' bad_action 'sample(sampling_port=asdf)' 'asdf: unknown port' bad_action 'sample(foo=bar)' 'invalid key "foo" in "sample" argument' bad_action 'sample' 'non-zero "probability" must be specified on sample' # ct bad_action 'ct(table=asdf)' 'unknown table asdf' bad_action 'ct(table=255)' 'invalid table 0xff' bad_action 'ct(foo=bar)' 'invalid argument to "ct" action: `foo'\' bad_action 'ct(force)' '"force" flag requires "commit" flag.' # nat bad_action 'nat(src=1.2.3.4x)' 'garbage (x) after nat range "1.2.3.4x" (pos: 7)' bad_action 'nat(src=1.2.3.4-0.1.2.3)' 'invalid nat range "1.2.3.4-0.1.2.3"' bad_action 'nat(foo=bar)' 'invalid key "foo" in "nat" argument' bad_action 'nat(src=1.2.3.4,dst=2.3.4.5)' 'May only specify one of "src" or "dst".' bad_action 'nat(persistent)' 'Flags allowed only with "src" or "dst".' bad_action 'nat(src=1.2.3.4,hash,random)' 'Both "hash" and "random" are not allowed.' # check_pkt_larger bad_action 'check_pkt_larger(1500)->reg0' \ 'Only 1-bit destination field is allowed' # goto_table bad_action 'goto_table:asdf' 'unknown table "asdf"' # nested actions bad_action 'set_field:1234->ct_mark' \ "cannot set CT fields outside of ct action" bad_action 'nat' 'Cannot have NAT action outside of "ct" action' bad_action 'ct(commit,exec(push_vlan(0x8100)))' \ "ct action doesn't support nested action push_vlan" bad_action 'ct(commit,exec(set_field:12:34:56:78:9a:bc->eth_dst))' \ "ct action doesn't support nested modification of eth_dst" bad_action 'conjunction(1, 2/3),ct_clear' \ '"conjunction" actions may be used along with "note" but not any other kind of action (such as the "ct_clear" action used here)' # instructions bad_action 'goto_table:5,goto_table:5' \ 'duplicate goto_table instruction not allowed, for OpenFlow 1.1+ compatibility' bad_action 'goto_table:5,clone()' \ 'invalid instruction ordering: apply_actions must appear before goto_table, for OpenFlow 1.1+ compatibility' AT_CHECK([ovs-ofctl parse-group 'group_id=1,type=select,bucket=actions=clear_actions'], [1], [], [ovs-ofctl: clear_actions instruction not allowed here ]) # ofpacts_parse__() bad_action 'apply_actions' 'apply_actions is the default instruction' bad_action 'xyzzy' 'unknown action xyzzy' bad_action 'drop,3' '"drop" must not be accompanied by any other action or instruction' # Too many actions writes=$(printf 'write_actions(%.0s' $(seq 100)) bad_action "${writes}" 'Action nested too deeply' outputs=$(printf '1,%.0s' $(seq 4096)) bad_action "${outputs}" 'input too big' AT_CLEANUP