AT_BANNER(IPsec)

dnl IPSEC_SETUP_UNDERLAY()
dnl
dnl Configure anything required in the underlay network
m4_define([IPSEC_SETUP_UNDERLAY],
      [AT_CHECK([cp ${abs_top_srcdir}/vswitchd/vswitch.ovsschema vswitch.ovsschema])
      dnl Set up the underlay switch
      AT_CHECK([ovs-ofctl add-flow br0 "actions=normal"])])

dnl IPSEC_ADD_NODE([namespace], [device], [address], [peer address]))
dnl
dnl Creates a dummy host that acts as an IPsec endpoint. Creates host in
dnl 'namespace' and attaches a veth 'device' to 'namespace' to act as the host
dnl NIC. Assigns 'address' to 'device' and adds the other end of veth 'device' to
dnl 'br0' which is an OVS bridge in the default namespace acting as an underlay
dnl switch. Sets the default gateway of 'namespace' to 'peer address'.
dnl
dnl Starts all daemons in 'namespace' that are required for IPsec
m4_define([IPSEC_ADD_NODE],
  [ADD_NAMESPACES($1)
  dnl Disable DAD. We know we wont get duplicates on this underlay network.
  NS_EXEC([$1], [sysctl -w net.ipv6.conf.all.accept_dad=0])
  NS_EXEC([$1], [sysctl -w net.ipv6.conf.default.accept_dad=0])
  ADD_VETH($2, $1, br0, $3/24)
  NS_EXEC([$1], [ip route add default via $4 dev $2])
  mkdir -p $ovs_base/$1
  touch $ovs_base/$1/.conf.db.~lock~
  NS_EXEC([$1], [ovsdb-tool create $ovs_base/$1/conf.db \
                $abs_top_srcdir/vswitchd/vswitch.ovsschema], [0], [], [stderr])

  dnl Start ovsdb-server.
  NS_EXEC([$1],[ovsdb-server $ovs_base/$1/conf.db --detach --no-chdir \
        --log-file=$ovs_base/$1/ovsdb.log --pidfile=$ovs_base/$1/ovsdb.pid \
        --remote=punix:$OVS_RUNDIR/$1/db.sock], [0], [], [stderr])
  on_exit "kill `cat $ovs_base/$1/ovsdb.pid`"
  NS_EXEC([$1], [ovs-vsctl --no-wait init])

  dnl Start ovs-vswitchd.
  NS_EXEC([$1], [ovs-vswitchd unix:${OVS_RUNDIR}/$1/db.sock --detach \
        --no-chdir --pidfile=$ovs_base/$1/vswitchd.pid \
        --unixctl=$ovs_base/$1/vswitchd.ctl \
        --log-file=$ovs_base/$1/vswitchd.log -vvconn -vofproto_dpif -vunixctl],\
        [0], [], [stderr])
  on_exit "kill_ovs_vswitchd `cat $ovs_base/$1/vswitchd.pid`"

  dnl Start pluto
  mkdir -p $ovs_base/$1/ipsec.d
  touch $ovs_base/$1/ipsec.conf
  touch $ovs_base/$1/secrets
  ipsec initnss --nssdir $ovs_base/$1/ipsec.d
  NS_CHECK_EXEC([$1], [ipsec pluto --config $ovs_base/$1/ipsec.conf \
        --ipsecdir $ovs_base/$1 --nssdir $ovs_base/$1/ipsec.d \
        --logfile $ovs_base/$1/pluto.log --secretsfile $ovs_base/$1/secrets \
        --rundir $ovs_base/$1], [0], [], [stderr])
  on_exit "kill `cat $ovs_base/$1/pluto.pid`"

  dnl Start ovs-monitor-ipsec
  NS_CHECK_EXEC([$1], [ovs-monitor-ipsec unix:${OVS_RUNDIR}/$1/db.sock\
        --pidfile=${OVS_RUNDIR}/$1/ovs-monitor-ipsec.pid --ike-daemon=libreswan\
        --ipsec-conf=$ovs_base/$1/ipsec.conf --ipsec-d=$ovs_base/$1/ipsec.d \
        --ipsec-secrets=$ovs_base/$1/secrets \
        --log-file=$ovs_base/$1/ovs-monitor-ipsec.log \
        --ipsec-ctl=$ovs_base/$1/pluto.ctl \
        --no-restart-ike-daemon --detach ], [0], [], [stderr])
  on_exit "kill `cat $ovs_base/$1/ovs-monitor-ipsec.pid`"

  dnl Set up OVS bridge
  NS_EXEC([$1], [ovs-vsctl --db unix:$ovs_base/$1/db.sock add-br br-ipsec])]
)
m4_define([IPSEC_ADD_NODE_LEFT], [IPSEC_ADD_NODE(left, p0, $1, $2)])
m4_define([IPSEC_ADD_NODE_RIGHT], [IPSEC_ADD_NODE(right, p1, $1, $2)])

dnl OVS_VSCTL([namespace], [sub-command])
dnl
dnl Runs `ovs-vsctl 'sub-command'` in 'namespace'
m4_define([OVS_VSCTL],
      [[ip netns exec $1 ovs-vsctl --db unix:$ovs_base/$1/db.sock $2 ]])
m4_define([OVS_VSCTL_LEFT], [OVS_VSCTL(left, $1)])
m4_define([OVS_VSCTL_RIGHT], [OVS_VSCTL(right, $1)])

dnl IPSEC_ADD_TUNNEL([namespace], [type], [options]])
dnl
dnl Creates a tunnel of type 'type' in namespace 'namespace' using 'options'
m4_define([IPSEC_ADD_TUNNEL],
      [OVS_VSCTL([$1], [add-port br-ipsec tun -- set Interface tun type=$2 $3])
      dnl Wait for all expected connections to be loaded into Libreswan.
      dnl GRE creates 1 connection, all others create 2.
      m4_if($2, [gre],
            [OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED($1)` -eq 1])],
            [OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED($1)` -eq 2])])
      ])
m4_define([IPSEC_ADD_TUNNEL_LEFT], [IPSEC_ADD_TUNNEL(left, $1, $2)])
m4_define([IPSEC_ADD_TUNNEL_RIGHT], [IPSEC_ADD_TUNNEL(right, $1, $2)])

dnl CHECK_LIBRESWAN()
dnl
dnl Check if necessary Libreswan dependencies are available on the test machine
m4_define([CHECK_LIBRESWAN],
      [dnl Skip tests if system has not been set up for Libreswan
      AT_SKIP_IF([!(ipsec --version | grep Libreswan)])
      AT_SKIP_IF([test ! -x $(which certutil)])
      AT_SKIP_IF([test ! -x $(which pk12util)])
      AT_SKIP_IF([test ! -x $(which openssl)])
      dnl If '$ovs_base' is too long, the following Libreswan issue will trigger
      dnl so we check that it is not too long and skip test if it is.
      dnl https://github.com/libreswan/libreswan/issues/428
      AT_SKIP_IF([test "${#ovs_base}" -gt "90" ])])

dnl IPSEC_STATUS_LOADED([])
dnl
dnl Get number of loaded connections from ipsec status
m4_define([IPSEC_STATUS_LOADED], [ipsec status --rundir $ovs_base/$1 | \
           grep "Total IPsec connections" | \
           sed 's/[[0-9]]* Total IPsec connections: loaded \([[0-2]]\), active \([[0-2]]\).*/\1/m'])

dnl IPSEC_STATUS_ACTIVE([])
dnl
dnl Get number of active connections from ipsec status
m4_define([IPSEC_STATUS_ACTIVE], [ipsec status --rundir $ovs_base/$1 | \
           grep "Total IPsec connections" | \
           sed 's/[[0-9]]* Total IPsec connections: loaded \([[0-2]]\), active \([[0-2]]\).*/\2/m'])

dnl CHECK_ESP_TRAFFIC()
dnl
dnl Checks for connectivity between nodes and that the underlay traffic is ESP.
m4_define([CHECK_ESP_TRAFFIC],
      [dnl Add test interfaces for pinging
      NS_EXEC([left], [ip addr add 192.0.0.1/24 dev br-ipsec])
      NS_EXEC([left], [ip link set dev br-ipsec up])

      NS_EXEC([right], [ip addr add 192.0.0.2/24 dev br-ipsec])
      NS_EXEC([right], [ip link set dev br-ipsec up])

      dnl Capture any underlay esp packets
      OVS_DAEMONIZE([tcpdump -l -nn -i ovs-p0 esp > $ovs_base/left/tcpdump.log], [tcpdump0.pid])
      OVS_DAEMONIZE([tcpdump -l -nn -i ovs-p1 esp > $ovs_base/right/tcpdump.log], [tcpdump1.pid])

      dnl Wait for all loaded connections to be active
      OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED(left)` -eq `IPSEC_STATUS_ACTIVE(left)`])
      OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED(right)` -eq `IPSEC_STATUS_ACTIVE(right)`])

      dnl Ping over IPsec tunnel
      NS_CHECK_EXEC([left], [ping -q -c 3 -i 0.3 -w 2 192.0.0.2 | FORMAT_PING], [0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])
      NS_CHECK_EXEC([right], [ping -q -c 3 -i 0.3 -w 2 192.0.0.1 | FORMAT_PING], [0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

      dnl Check for esp traffic
      dnl Note: Geneve tests may not work on older kernels due to CVE-2020-25645
      dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988
      AT_CHECK([cat $ovs_base/left/tcpdump.log | grep ESP], [0], [stdout], [stderr])
      AT_CHECK([cat $ovs_base/right/tcpdump.log | grep ESP], [0], [stdout], [stderr])])

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, localip, psk)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 \
                      options:local_ip=10.1.1.1 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 \
                       options:local_ip=10.1.1.2 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, defaultroute, self-signed)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve self-signed])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Create and set self-signed certs
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log req -u left
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log req -u right
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log self-sign left
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log self-sign right
OVS_VSCTL_LEFT(set Open_vSwitch . \
      other_config:certificate=${ovs_base}/left-cert.pem \
      other_config:private_key=${ovs_base}/left-privkey.pem)
OVS_VSCTL_RIGHT(set Open_vSwitch . \
      other_config:certificate=${ovs_base}/right-cert.pem \
      other_config:private_key=${ovs_base}/right-privkey.pem)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 \
                      options:remote_cert=${ovs_base}/right-cert.pem])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 \
                       options:remote_cert=${ovs_base}/left-cert.pem])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, defaultroute, ca-signed)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve ca-signed])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Create and set ca-signed certs
ovs-pki --force -b --dir=${ovs_base} -l ${ovs_base}/ovs-pki.log init
ovs-pki -b --dir=${ovs_base} -l ${ovs_base}/ovs-pki.log req+sign -u left
ovs-pki -b --dir=${ovs_base} -l ${ovs_base}/ovs-pki.log req+sign -u right
OVS_VSCTL_LEFT(set Open_vSwitch . \
      other_config:ca_cert=${ovs_base}/switchca/cacert.pem \
      other_config:certificate=${ovs_base}/left-cert.pem \
      other_config:private_key=${ovs_base}/left-privkey.pem)
OVS_VSCTL_RIGHT(set Open_vSwitch . \
      other_config:ca_cert=${ovs_base}/switchca/cacert.pem \
      other_config:certificate=${ovs_base}/right-cert.pem \
      other_config:private_key=${ovs_base}/right-privkey.pem)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:remote_name=right])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:remote_name=left])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, gre, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv4 gre psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([gre],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([gre],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, vxlan, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv4, vxlan psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([vxlan],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([vxlan],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv6, vxlan, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv6 vxlan psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(fd01::101, fd01::102)
IPSEC_ADD_NODE_RIGHT(fd01::102, fd01::101)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([vxlan],
                      [options:remote_ip=fd01::102 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([vxlan],
                       [options:remote_ip=fd01::101 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv6, vxlan, localip, psk)])
AT_KEYWORDS([ipsec libreswan ipv6 vxlan psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(fd01::101, fd01::102)
IPSEC_ADD_NODE_RIGHT(fd01::102, fd01::101)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([vxlan],
                      [options:remote_ip=fd01::102 \
                      options:local_ip=fd01::101 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([vxlan],
                       [options:remote_ip=fd01::101 \
                       options:local_ip=fd01::102 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv6, geneve, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv6 geneve psk])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(fd01::101, fd01::102)
IPSEC_ADD_NODE_RIGHT(fd01::102, fd01::101)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=fd01::102 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=fd01::101 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP