#!/usr/bin/python
# Copyright (c) 2009, 2010 Nicira Networks
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


# A daemon to monitor attempts to create GRE-over-IPsec tunnels.
# Uses racoon and setkey to support the configuration.  Assumes that
# OVS has complete control over IPsec configuration for the box.

# xxx To-do:
#  - Doesn't actually check that Interface is connected to bridge
#  - Doesn't support cert authentication


import getopt
import logging, logging.handlers
import os
import stat
import subprocess
import sys

from ovs.db import error
from ovs.db import types
import ovs.util
import ovs.daemon
import ovs.db.idl


# By default log messages as DAEMON into syslog
s_log = logging.getLogger("ovs-monitor-ipsec")
l_handler = logging.handlers.SysLogHandler(
        "/dev/log",
        facility=logging.handlers.SysLogHandler.LOG_DAEMON)
l_formatter = logging.Formatter('%(filename)s: %(levelname)s: %(message)s')
l_handler.setFormatter(l_formatter)
s_log.addHandler(l_handler)


setkey = "/usr/sbin/setkey"

# Class to configure the racoon daemon, which handles IKE negotiation
class Racoon:
    # Default locations for files
    conf_file = "/etc/racoon/racoon.conf"
    cert_file = "/etc/racoon/certs"
    psk_file = "/etc/racoon/psk.txt"

    # Default racoon configuration file we use for IKE
    conf_template = """# Configuration file generated by Open vSwitch
#
# Do not modify by hand!

path pre_shared_key "/etc/racoon/psk.txt";
path certificate "/etc/racoon/certs";

remote anonymous {
        exchange_mode main;
        nat_traversal on;
        proposal {
                encryption_algorithm aes;
                hash_algorithm sha1;
                authentication_method pre_shared_key;
                dh_group 2;
        }
}

sainfo anonymous {
        pfs_group 2;
        lifetime time 1 hour;
        encryption_algorithm aes;
        authentication_algorithm hmac_sha1, hmac_md5;
        compression_algorithm deflate;
}
"""

    def __init__(self):
        self.psk_hosts = {}
        self.cert_hosts = {}

        # Replace racoon's conf file with our template
        f = open(Racoon.conf_file, "w")
        f.write(Racoon.conf_template)
        f.close()

        # Clear out any pre-shared keys
        self.commit_psk()

        self.reload()

    def reload(self):
        exitcode = subprocess.call(["/etc/init.d/racoon", "reload"])
        if exitcode != 0:
            s_log.warning("couldn't reload racoon")

    def commit_psk(self):
        f = open(Racoon.psk_file, 'w')
 
        # The file must only be accessible by root
        os.chmod(Racoon.psk_file, stat.S_IRUSR | stat.S_IWUSR)

        f.write("# Generated by Open vSwitch...do not modify by hand!\n\n")
        for host, psk in self.psk_hosts.iteritems():
            f.write("%s   %s\n" % (host, psk))
        f.close()

    def add_psk(self, host, psk):
        self.psk_hosts[host] = psk
        self.commit_psk()

    def del_psk(self, host):
        if host in self.psk_hosts:
            del self.psk_hosts[host]
            self.commit_psk()


# Class to configure IPsec on a system using racoon for IKE and setkey
# for maintaining the Security Association Database (SAD) and Security
# Policy Database (SPD).  Only policies for GRE are supported.
class IPsec:
    def __init__(self):
        self.sad_flush()
        self.spd_flush()
        self.racoon = Racoon()

    def call_setkey(self, cmds):
        try:
            p = subprocess.Popen([setkey, "-c"], stdin=subprocess.PIPE, 
                    stdout=subprocess.PIPE)
        except:
            s_log.error("could not call setkey")
            sys.exit(1)

        # xxx It is safer to pass the string into the communicate()
        # xxx method, but it didn't work for slightly longer commands.
        # xxx An alternative may need to be found.
        p.stdin.write(cmds)
        return p.communicate()[0]

    def get_spi(self, local_ip, remote_ip, proto="esp"):
        # Run the setkey dump command to retrieve the SAD.  Then, parse
        # the output looking for SPI buried in the output.  Note that
        # multiple SAD entries can exist for the same "flow", since an
        # older entry could be in a "dying" state.
        spi_list = []
        host_line = "%s %s" % (local_ip, remote_ip)
        results = self.call_setkey("dump ;").split("\n")
        for i in range(len(results)):
            if results[i].strip() == host_line:
                # The SPI is in the line following the host pair
                spi_line = results[i+1]
                if (spi_line[1:4] == proto):
                    spi = spi_line.split()[2]
                    spi_list.append(spi.split('(')[1].rstrip(')'))
        return spi_list

    def sad_flush(self):
        self.call_setkey("flush;")

    def sad_del(self, local_ip, remote_ip):
        # To delete all SAD entries, we should be able to use setkey's
        # "deleteall" command.  Unfortunately, it's fundamentally broken
        # on Linux and not documented as such.
        cmds = ""

        # Delete local_ip->remote_ip SAD entries
        spi_list = self.get_spi(local_ip, remote_ip)
        for spi in spi_list:
            cmds += "delete %s %s esp %s;\n" % (local_ip, remote_ip, spi)

        # Delete remote_ip->local_ip SAD entries
        spi_list = self.get_spi(remote_ip, local_ip)
        for spi in spi_list:
            cmds += "delete %s %s esp %s;\n" % (remote_ip, local_ip, spi)

        if cmds:
            self.call_setkey(cmds)

    def spd_flush(self):
        self.call_setkey("spdflush;")

    def spd_add(self, local_ip, remote_ip):
        cmds = ("spdadd %s %s gre -P out ipsec esp/transport//default;" %
                    (local_ip, remote_ip))
        cmds += "\n"
        cmds += ("spdadd %s %s gre -P in ipsec esp/transport//default;" %
                    (remote_ip, local_ip))
        self.call_setkey(cmds)

    def spd_del(self, local_ip, remote_ip):
        cmds = "spddelete %s %s gre -P out;" % (local_ip, remote_ip)
        cmds += "\n"
        cmds += "spddelete %s %s gre -P in;" % (remote_ip, local_ip)
        self.call_setkey(cmds)

    def ipsec_cert_del(self, local_ip, remote_ip):
        # Need to support cert...right now only PSK supported
        self.racoon.del_psk(remote_ip)
        self.spd_del(local_ip, remote_ip)
        self.sad_del(local_ip, remote_ip)

    def ipsec_cert_update(self, local_ip, remote_ip, cert):
        # Need to support cert...right now only PSK supported
        self.racoon.add_psk(remote_ip, "abc12345")
        self.spd_add(local_ip, remote_ip)

    def ipsec_psk_del(self, local_ip, remote_ip):
        self.racoon.del_psk(remote_ip)
        self.spd_del(local_ip, remote_ip)
        self.sad_del(local_ip, remote_ip)

    def ipsec_psk_update(self, local_ip, remote_ip, psk):
        self.racoon.add_psk(remote_ip, psk)
        self.spd_add(local_ip, remote_ip)


def keep_table_columns(schema, table_name, column_types):
    table = schema.tables.get(table_name)
    if not table:
        raise error.Error("schema has no %s table" % table_name)

    new_columns = {}
    for column_name, column_type in column_types.iteritems():
        column = table.columns.get(column_name)
        if not column:
            raise error.Error("%s table schema lacks %s column"
                              % (table_name, column_name))
        if column.type != column_type:
            raise error.Error("%s column in %s table has type \"%s\", "
                              "expected type \"%s\""
                              % (column_name, table_name,
                                 column.type.toEnglish(),
                                 column_type.toEnglish()))
        new_columns[column_name] = column
    table.columns = new_columns
    return table
 
def monitor_uuid_schema_cb(schema):
    string_type = types.Type(types.BaseType(types.StringType))
    string_map_type = types.Type(types.BaseType(types.StringType),
                                 types.BaseType(types.StringType),
                                 0, sys.maxint)
 
    new_tables = {}
    new_tables["Interface"] = keep_table_columns(
        schema, "Interface", {"name": string_type,
                              "type": string_type,
                              "options": string_map_type,
                              "other_config": string_map_type})
    schema.tables = new_tables

def usage():
    print "usage: %s [OPTIONS] DATABASE" % sys.argv[0]
    print "where DATABASE is a socket on which ovsdb-server is listening."
    ovs.daemon.usage()
    print "Other options:"
    print "  -h, --help               display this help message"
    sys.exit(0)
 
def main(argv):
    try:
        options, args = getopt.gnu_getopt(
            argv[1:], 'h', ['help'] + ovs.daemon.LONG_OPTIONS)
    except getopt.GetoptError, geo:
        sys.stderr.write("%s: %s\n" % (ovs.util.PROGRAM_NAME, geo.msg))
        sys.exit(1)
 
    for key, value in options:
        if key in ['-h', '--help']:
            usage()
        elif not ovs.daemon.parse_opt(key, value):
            sys.stderr.write("%s: unhandled option %s\n"
                             % (ovs.util.PROGRAM_NAME, key))
            sys.exit(1)
 
    if len(args) != 1:
        sys.stderr.write("%s: exactly one nonoption argument is required "
                         "(use --help for help)\n" % ovs.util.PROGRAM_NAME)
        sys.exit(1)

    ovs.daemon.die_if_already_running()
 
    remote = args[0]
    idl = ovs.db.idl.Idl(remote, "Open_vSwitch", monitor_uuid_schema_cb)

    ovs.daemon.daemonize()

    ipsec = IPsec()

    interfaces = {}
    while True:
        if not idl.run():
            poller = ovs.poller.Poller()
            idl.wait(poller)
            poller.block()
            continue
 
        new_interfaces = {}
        for rec in idl.data["Interface"].itervalues():
            name = rec.name.as_scalar()
            ipsec_cert = rec.other_config.get("ipsec_cert")
            ipsec_psk = rec.other_config.get("ipsec_psk")
            is_ipsec = ipsec_cert or ipsec_psk

            if rec.type.as_scalar() == "gre" and is_ipsec:
                new_interfaces[name] = {
                        "remote_ip": rec.options.get("remote_ip"),
                        "local_ip": rec.options.get("local_ip", "0.0.0.0/0"),
                        "ipsec_cert": ipsec_cert,
                        "ipsec_psk": ipsec_psk }
 
        if interfaces != new_interfaces:
            for name, vals in interfaces.items():
                if name not in new_interfaces.keys():
                    ipsec.ipsec_cert_del(vals["local_ip"], vals["remote_ip"])
            for name, vals in new_interfaces.items():
                if vals == interfaces.get(name):
                    s_log.warning(
                        "configuration changed for %s, need to delete "
                        "interface first" % name)
                    continue

                if vals["ipsec_cert"]:
                    ipsec.ipsec_cert_update(vals["local_ip"],
                            vals["remote_ip"], vals["ipsec_cert"])
                elif vals["ipsec_psk"]:
                    ipsec.ipsec_psk_update(vals["local_ip"], 
                            vals["remote_ip"], vals["ipsec_psk"])
                else:
                    s_log.warning(
                        "no ipsec_cert or ipsec_psk defined for %s" % name)
                    continue

            interfaces = new_interfaces
 
if __name__ == '__main__':
    try:
        main(sys.argv)
    except SystemExit:
        # Let system.exit() calls complete normally
        raise
    except:
        s_log.exception("traceback")
        sys.exit(ovs.daemon.RESTART_EXIT_CODE)
