1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
|
README.Debian for openvswitch-switch
---------------------------------
To use the Linux kernel-based switch implementation, you will need an
Open vSwitch kernel module. There are multiple ways to obtain one.
In order of increasing manual effort, these are:
* Use a Linux kernel 3.3 or later, which has an integrated Open
vSwitch kernel module.
The upstream Linux kernel module lacks a few features that
are in the third-party module. For details, please see the
FAQ, "What features are not available in the Open vSwitch
kernel datapath that ships as part of the upstream Linux
kernel?".
* Install the "openvswitch-datapath-dkms" Debian package that
you built earlier. This should automatically build and
install the Open vSwitch kernel module for your running
kernel.
This option requires that you have a compiler and toolchain
installed on the machine where you run Open vSwitch, which
may be unacceptable in some production server environments.
* Install the "openvswitch-datapath-source" Debian package, use
"module-assistant" to build a Debian package of the Open
vSwitch kernel module for your kernel, and then install that
Debian package.
You can install the kernel module Debian packages that you
build this way on the same machine where you built it or on
another machine or machines, which means that you don't
necessarily have to have any build infrastructure on the
machines where you use the kernel module.
/usr/share/doc/openvswitch-datapath-source/README.Debian has
details on the build process.
* Build and install the kernel module by hand.
Debian network scripts integration
----------------------------------
This package lets a user to optionally configure Open vSwitch bridges
and ports from /etc/network/interfaces. Please refer to the interfaces(5)
manpage for more details regarding /etc/network/interfaces.
The stanzas that configure the OVS bridges should begin with "allow-ovs"
followed by name of the bridge. Here is an example.
allow-ovs br0
The stanzas that configure the OVS ports should begin with
"allow-${bridge-name}" followed by name of the port. Here is an example.
allow-br0 eth0
The following OVS specific "command" options are supported:
- ovs_type: This can either be OVSBridge, OVSPort, OVSIntPort, OVSBond,
OVSPatchPort or OVSTunnel depending on whether you configure a bridge,
port, an internal port, a bond, a patch port or a tunnel. This is a
required option.
- ovs_ports: This option specifies all the ports that belong to a bridge.
- ovs_bridge: This options specifies a bridge to which a port belongs.
This is a required option for a port.
- ovs_bonds: This option specifies the list of physical interfaces to be
bonded together.
- ovs_patch_peer: For "OVSPatchPort" interfaces, this field specifies
the patch's peer on the other bridge.
- ovs_tunnel_type: For "OVSTunnel" interfaces, the type of the tunnel.
For example, "gre", "vxlan", etc.
- ovs_tunnel_options: For "OVSTunnel" interfaces, this field should be
used to specify the tunnel options like remote_ip, key, etc.
- ovs_options: This option lets you add extra arguments to a ovs-vsctl
command. See examples.
- ovs_extra: This option lets you run additional ovs-vsctl commands,
separated by "--" (double dash). Variables can be part of the "ovs_extra"
option. You can provide all the standard environmental variables
described in the interfaces(5) man page. You can also pass shell
commands.
More implementation specific details can be seen in the examples.
Examples:
--------
ex 1: A standalone bridge.
allow-ovs br0
iface br0 inet static
address 192.168.1.1
netmask 255.255.255.0
ovs_type OVSBridge
ex 2: A bridge with one port.
allow-ovs br0
iface br0 inet dhcp
ovs_type OVSBridge
ovs_ports eth0
allow-br0 eth0
iface eth0 inet manual
ovs_bridge br0
ovs_type OVSPort
ex 3: A bridge with multiple physical ports.
allow-ovs br0
iface br0 inet dhcp
ovs_type OVSBridge
ovs_ports eth0 eth1
allow-br0 eth0
iface eth0 inet manual
ovs_bridge br0
ovs_type OVSPort
allow-br0 eth1
iface eth1 inet manual
ovs_bridge br0
ovs_type OVSPort
ex 4: A bridge with an OVS internal port.
allow-ovs br1
iface br1 inet static
address 192.168.1.1
netmask 255.255.255.0
ovs_type OVSBridge
ovs_ports vlan100
allow-br1 vlan100
iface vlan100 inet manual
ovs_bridge br1
ovs_type OVSIntPort
ovs_options tag=100
ovs_extra set interface ${IFACE} external-ids:iface-id=$(hostname -s)
ex 5: Bonding.
allow-ovs br2
iface br2 inet static
address 192.170.1.1
netmask 255.255.255.0
ovs_type OVSBridge
ovs_ports bond0
allow-br2 bond0
iface bond0 inet manual
ovs_bridge br2
ovs_type OVSBond
ovs_bonds eth2 eth3
ovs_options bond_mode=balance-tcp lacp=active
ex 6: Patch ports.
allow-ovs br0
iface br0 inet manual
ovs_type OVSBridge
ovs_ports patch0
allow-br0 patch0
iface patch0 inet manual
ovs_bridge br0
ovs_type OVSPatchPort
ovs_patch_peer patch1
allow-ovs br1
iface br1 inet manual
ovs_type OVSBridge
ovs_ports patch1
allow-br1 patch1
iface patch1 inet manual
ovs_bridge br1
ovs_type OVSPatchPort
ovs_patch_peer patch0
ex 7: Tunnel.
allow-ovs br1
iface br1 inet static
address 192.168.1.1
netmask 255.255.255.0
ovs_type OVSBridge
ovs_ports gre1
allow-br1 gre1
iface gre1 inet manual
ovs_bridge br1
ovs_type OVSTunnel
ovs_tunnel_type gre
ovs_tunnel_options options:remote_ip=182.168.1.2 options:key=1
ex 8: Create and destroy bridges.
ifup --allow=ovs $list_of_bridges
ifdown --allow=ovs $list_of_bridges
|
