path: root/tests/learn.at

AT_BANNER([learning action])

AT_SETUP([learning action - parsing and formatting])
AT_DATA([flows.txt], [[
actions=learn()
actions=learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[], load:10->NXM_NX_REG0[5..10])
actions=learn(table=1,idle_timeout=10, hard_timeout=20, fin_idle_timeout=5, fin_hard_timeout=10, priority=10, cookie=0xfedcba9876543210, in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
]])
AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
[[usable protocols: any
chosen protocol: OpenFlow10-table_id
OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1)
OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0xa->NXM_NX_REG0[5..10])
OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,idle_timeout=10,hard_timeout=20,fin_idle_timeout=5,fin_hard_timeout=10,priority=10,cookie=0xfedcba9876543210,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
]])
AT_CLEANUP

AT_SETUP([learning action - parsing and formatting - illegal in_port_oxm])
AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(table=1, in_port_oxm=123456)']],
  [1], [], [stderr])
AT_CHECK([sed -e 's/.*|ofp_util|WARN|//' < stderr], [0],
  [[port 123456 is outside the supported range 0 through ffff or 0xffffff00 through 0xffffffff
ovs-ofctl: 123456: port value out of range for in_port_oxm
]], [[]])
AT_CLEANUP

AT_SETUP([learning action - parsing and formatting - OXM])
AT_DATA([flows.txt], [[
actions=learn(output:OXM_OF_IN_PORT[])
actions=learn(table=1, in_port=1, load:OXM_OF_IN_PORT[]->NXM_NX_REG1[], load:0xfffffffe->OXM_OF_IN_PORT[])
]])
AT_CHECK([ovs-ofctl -O OpenFlow12 parse-flows flows.txt], [0],
[[usable protocols: any
chosen protocol: OXM-OpenFlow12
OFPT_FLOW_MOD (OF1.2) (xid=0x1): ADD actions=learn(table=1,output:OXM_OF_IN_PORT[])
OFPT_FLOW_MOD (OF1.2) (xid=0x2): ADD actions=learn(table=1,in_port=1,load:OXM_OF_IN_PORT[]->NXM_NX_REG1[],load:0xfffffffe->OXM_OF_IN_PORT[])
]])
AT_CLEANUP

AT_SETUP([learning action - examples])
AT_DATA([flows.txt], [[
# These are the examples from nicira-ext.h.
actions=learn(in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
actions=learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
table=0 actions=learn(table=1,hard_timeout=10, NXM_OF_VLAN_TCI[0..11],output:NXM_OF_IN_PORT[]), resubmit(,1)
table=1 priority=0 actions=flood
]])
AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
[[usable protocols: OXM,OpenFlow10+table_id,NXM+table_id,OpenFlow11
chosen protocol: OpenFlow10+table_id
OFPT_FLOW_MOD (xid=0x1): ADD table:255 actions=learn(table=1,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
OFPT_FLOW_MOD (xid=0x2): ADD table:255 actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,hard_timeout=10,NXM_OF_VLAN_TCI[0..11],output:NXM_OF_IN_PORT[]),resubmit(,1)
OFPT_FLOW_MOD (xid=0x4): ADD table:1 priority=0 actions=FLOOD
]])
AT_CLEANUP

AT_SETUP([learning action - satisfied prerequisites])
AT_DATA([flows.txt],
[[actions=learn(eth_type=0x800,load:5->NXM_OF_IP_DST[])
ip,actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
ip,actions=learn(eth_type=0x800,OXM_OF_IPV4_DST[])
]])
AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
[[usable protocols: any
chosen protocol: OpenFlow10-table_id
OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x5->NXM_OF_IP_DST[])
OFPT_FLOW_MOD (xid=0x2): ADD ip actions=learn(table=1,load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
OFPT_FLOW_MOD (xid=0x3): ADD ip actions=learn(table=1,eth_type=0x800,NXM_OF_IP_DST[])
]])
AT_CLEANUP

AT_SETUP([learning action - invalid prerequisites])
AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(load:5->NXM_OF_IP_DST[])']],
  [1], [], [stderr])
AT_CHECK([sed -e 's/.*|meta_flow|WARN|//' < stderr], [0],
  [[destination field ip_dst lacks correct prerequisites
ovs-ofctl: actions are invalid with specified match (OFPBAC_MATCH_INCONSISTENT)
]], [[]])
AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])']],
  [1], [], [stderr])
AT_CHECK([sed -e 's/.*|meta_flow|WARN|//' < stderr], [0],
  [[source field ip_dst lacks correct prerequisites
ovs-ofctl: actions are invalid with specified match (OFPBAC_MATCH_INCONSISTENT)
]])
AT_CLEANUP

AT_SETUP([learning action - standard VLAN+MAC learning])
OVS_VSWITCHD_START(
  [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1 -- \
   add-port br0 p2 -- set Interface p2 type=dummy ofport_request=2 -- \
   add-port br0 p3 -- set Interface p3 type=dummy ofport_request=3])
# Set up flow table for VLAN+MAC learning.
AT_DATA([flows.txt], [[
table=0 actions=learn(table=1, hard_timeout=60, NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[]), resubmit(,1)
table=1 priority=0 actions=flood
]])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])

# Trace an ARP packet arriving on port 3, to create a MAC learning entry.
flow="in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`

expected="1,2,100"
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])

# Check for the MAC learning entry.
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:05 actions=output:3
 table=1, priority=0 actions=FLOOD
NXST_FLOW reply:
])

# Trace a packet arrival destined for the learned MAC.
# (This will also learn a MAC.)
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=2,sha=50:54:00:00:00:06,tha=50:54:00:00:00:05)' -generate], [0], [stdout])
AT_CHECK([tail -1 stdout], [0], [Datapath actions: 3
])

# Check for both MAC learning entries.
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip |sort], [0], [dnl
 table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:05 actions=output:3
 table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:06 actions=output:1
 table=1, priority=0 actions=FLOOD
NXST_FLOW reply:
])

# Trace a packet arrival that updates the first learned MAC entry.
flow="in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`

expected="1,3,100"
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])

# Check that the MAC learning entry was updated.
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:05 actions=output:2
 table=1, hard_timeout=60, vlan_tci=0x0000/0x0fff,dl_dst=50:54:00:00:00:06 actions=output:1
 table=1, priority=0 actions=FLOOD
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that repeated uses of a "learn" action cause the
dnl modified time of the learned flow to advance.  Otherwise, the
dnl learned flow will expire after its hard timeout even though it's
dnl supposed to be refreshed.  (The expiration can be hard to see since
dnl it gets re-learned again the next time a packet appears, but
dnl sometimes the expiration can cause temporary flooding etc.)
AT_SETUP([learning action - learn refreshes hard_age])
OVS_VSWITCHD_START(
  [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1 -- \
   add-port br0 p2 -- set Interface p2 type=dummy ofport_request=2 -- \
   add-port br0 p3 -- set Interface p3 type=dummy ofport_request=3])

ovs-appctl time/stop

# Set up flow table for MAC learning.
AT_DATA([flows.txt], [[
table=0 actions=learn(table=1, hard_timeout=10, NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[]), resubmit(,1)
table=1 priority=0 actions=flood
]])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])

# Trace an ICMP packet arriving on port 3, to create a MAC learning entry.
flow="in_port(3),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)"
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`

expected="1,2,100"
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])

# Check that the MAC learning entry appeared.
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 table=1, hard_timeout=10, dl_dst=50:54:00:00:00:07 actions=output:3
 table=1, priority=0 actions=FLOOD
NXST_FLOW reply:
])

# For 25 seconds, make sure that the MAC learning entry doesn't
# disappear as long as we refresh it every second.
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25; do
    ovs-appctl time/warp 1000
    AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])

    # Check that the entry is there.
    AT_CHECK([ovs-ofctl dump-flows br0 table=1], [0], [stdout])
    AT_CHECK([ofctl_strip < stdout | sort], [0], [dnl
 table=1, hard_timeout=10, dl_dst=50:54:00:00:00:07 actions=output:3
 table=1, priority=0 actions=FLOOD
NXST_FLOW reply:
])

    if test $i != 1; then
        # Check that hard_age has appeared.  We need to do this separately
        # from the above check because ofctl_strip removes it.  dump-flows
        # only prints hard_age when it is different from the flow's duration
        # (that is, the number of seconds from the time it was created),
        # so we only check for it after we've refreshed the flow once.
        AT_CHECK([grep dl_dst=50:54:00:00:00:07 stdout | grep -c hard_age],
                 [0], [1
])
    fi
done

# Make sure that 15 seconds without refreshing makes the flow time out.
ovs-appctl time/warp 5000
ovs-appctl time/warp 5000
ovs-appctl time/warp 5000
    AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 table=1, priority=0 actions=FLOOD
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([learning action - TCPv4 port learning])
OVS_VSWITCHD_START(
  [add-port br0 p1 -- set Interface p1 type=dummy -- \
   add-port br0 p2 -- set Interface p2 type=dummy -- \
   add-port br0 p3 -- set Interface p3 type=dummy])
# Set up flow table for TCPv4 port learning.
AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp actions=learn(table=1, hard_timeout=60, eth_type=0x800, nw_proto=6, NXM_OF_IP_SRC[]=NXM_OF_IP_DST[], NXM_OF_IP_DST[]=NXM_OF_IP_SRC[], NXM_OF_TCP_SRC[]=NXM_OF_TCP_DST[], NXM_OF_TCP_DST[]=NXM_OF_TCP_SRC[]), flood']])

# Trace a TCPv4 packet arriving on port 3.
flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=40000,dst=80)"
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`

expected="1,2,100"
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])

# Check for the learning entry.
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
 table=1, hard_timeout=60, tcp,nw_src=192.168.0.1,nw_dst=192.168.0.2,tp_src=80,tp_dst=40000 actions=drop
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([learning action - TCPv6 port learning])
OVS_VSWITCHD_START(
  [add-port br0 p1 -- set Interface p1 type=dummy -- \
   add-port br0 p2 -- set Interface p2 type=dummy -- \
   add-port br0 p3 -- set Interface p3 type=dummy])
# Set up flow table for TCPv6 port learning.
# Also add a 128-bit-wide "load" action and a 128-bit literal match to check
# that they work.
AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp6 actions=learn(table=1, hard_timeout=60, eth_type=0x86dd, nw_proto=6, NXM_NX_IPV6_SRC[]=NXM_NX_IPV6_DST[], ipv6_dst=2001:0db8:85a3:0000:0000:8a2e:0370:7334, NXM_OF_TCP_SRC[]=NXM_OF_TCP_DST[], NXM_OF_TCP_DST[]=NXM_OF_TCP_SRC[], load(0x20010db885a308d313198a2e03707348->NXM_NX_IPV6_DST[])), flood']])

# Trace a TCPv6 packet arriving on port 3.
flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x86dd),ipv6(src=fec0::2,dst=fec0::1,label=0,proto=6,tclass=0,hlimit=255,frag=no),tcp(src=40000,dst=80)"
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`

expected="1,2,100"
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])

# Check for the learning entry.
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 table=1, hard_timeout=60, tcp6,ipv6_src=fec0::1,ipv6_dst=2001:db8:85a3::8a2e:370:7334,tp_src=80,tp_dst=40000 actions=load:0x13198a2e03707348->NXM_NX_IPV6_DST[[0..63]],load:0x20010db885a308d3->NXM_NX_IPV6_DST[[64..127]]
 tcp6 actions=learn(table=1,hard_timeout=60,eth_type=0x86dd,nw_proto=6,NXM_NX_IPV6_SRC[[]]=NXM_NX_IPV6_DST[[]],ipv6_dst=2001:db8:85a3::8a2e:370:7334,NXM_OF_TCP_SRC[[]]=NXM_OF_TCP_DST[[]],NXM_OF_TCP_DST[[]]=NXM_OF_TCP_SRC[[]],load:0x20010db885a308d313198a2e03707348->NXM_NX_IPV6_DST[[]]),FLOOD
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

# In this use of a learn action, the first packet in the flow creates
# a new flow that changes the behavior of subsequent packets in the
# flow.
AT_SETUP([learning action - self-modifying flow])
OVS_VSWITCHD_START
ADD_OF_PORTS([br0], 1, 2, 3)

ovs-appctl time/stop
# Set up flow table for TCPv4 port learning.
AT_CHECK([[ovs-ofctl add-flow br0 'actions=load:3->NXM_NX_REG0[0..15],learn(table=0,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2']])

# Trace some packets arriving.  The particular packets don't matter.
for i in 1 2 3 4 5 6 7 8 9 10; do
    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
    ovs-appctl time/warp 10
    if [[ $i -eq 1 ]]; then
        sleep 1
    fi
done

# Check for the learning entry.
ovs-appctl time/warp 1000
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0],
[[ n_packets=1, n_bytes=60, actions=load:0x3->NXM_NX_REG0[0..15],learn(table=0,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2
 n_packets=9, n_bytes=540, priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:05 actions=output:3
NXST_FLOW reply:
]])

# Check that the first packet went out port 2 and the rest out port 3.
AT_CHECK(
  [(ovs-ofctl dump-ports br0 2; ovs-ofctl dump-ports br0 3) | STRIP_XIDS], [0],
  [OFPST_PORT reply: 1 ports
  port  2: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=1, bytes=60, drop=0, errs=0, coll=0
OFPST_PORT reply: 1 ports
  port  3: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=9, bytes=540, drop=0, errs=0, coll=0
])

OVS_VSWITCHD_STOP
AT_CLEANUP

# This test is much like the previous, but adds idle timeouts and sends
# two different flows to the bridge. This tests that the statistics are
# attributed correctly.
AT_SETUP([learning action - self-modifying flow with idle_timeout])
OVS_VSWITCHD_START
ADD_OF_PORTS([br0], 1, 2, 3)

ovs-appctl time/stop
# Set up flow table for TCPv4 port learning.
AT_CHECK([[ovs-ofctl add-flow br0 'actions=load:3->NXM_NX_REG0[0..15],learn(table=0,idle_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2']])

# Trace some packets arriving.  The particular packets don't matter.
for i in `seq 1 10`; do
    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
    ovs-appctl time/warp 10
    if [[ $i -eq 1 ]]; then
        sleep 1
    fi
done

# Trace some packets arriving.  This is is a different flow from the previous.
# Note that we advance time by 1 second between each packet here.
for i in `seq 1 10`; do
    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
    ovs-appctl time/warp 1000
    if [[ $i -eq 1 ]]; then
        sleep 1
    fi
done

# Check that the first packet of each flow went out port 2 and the rest out
# port 3.
AT_CHECK(
  [(ovs-ofctl dump-ports br0 2; ovs-ofctl dump-ports br0 3) | STRIP_XIDS], [0],
  [OFPST_PORT reply: 1 ports
  port  2: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=2, bytes=120, drop=0, errs=0, coll=0
OFPST_PORT reply: 1 ports
  port  3: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=18, bytes=1080, drop=0, errs=0, coll=0
])

# Check for the learning entry.
ovs-appctl time/warp 1000
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0],
[[ n_packets=2, n_bytes=120, actions=load:0x3->NXM_NX_REG0[0..15],learn(table=0,idle_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2
 n_packets=9, n_bytes=540, idle_timeout=5, priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:06 actions=output:3
NXST_FLOW reply:
]])
OVS_VSWITCHD_STOP
AT_CLEANUP

# This test is much like the previous, but adds hard timeouts and sends
# two different flows to the bridge. This tests that the statistics are
# attributed correctly.
AT_SETUP([learning action - self-modifying flow with hard_timeout])
OVS_VSWITCHD_START
ADD_OF_PORTS([br0], 1, 2, 3)

ovs-appctl time/stop
# Set up flow table for TCPv4 port learning.
AT_CHECK([[ovs-ofctl add-flow br0 'actions=load:3->NXM_NX_REG0[0..15],learn(table=0,hard_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2']])

# Trace some packets arriving.  The particular packets don't matter.
for i in `seq 1 10`; do
    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
    ovs-appctl time/warp 10
    if [[ $i -eq 1 ]]; then
        sleep 1
    fi
done

# Trace some packets arriving.  This is is a different flow from the previous.
# Note that we advance time by 1 second between each packet here.
for i in `seq 1 10`; do
    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
    ovs-appctl time/warp 1000
    if [[ $i -eq 1 ]]; then
        sleep 1
    fi
done

# Check that the first packet of each flow went out port 2 and the rest out
# port 3.
AT_CHECK(
  [(ovs-ofctl dump-ports br0 2; ovs-ofctl dump-ports br0 3) | STRIP_XIDS], [0],
  [OFPST_PORT reply: 1 ports
  port  2: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=3, bytes=180, drop=0, errs=0, coll=0
OFPST_PORT reply: 1 ports
  port  3: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=17, bytes=1020, drop=0, errs=0, coll=0
])

# Check for the learning entry.
ovs-appctl time/warp 1000
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0],
[[ n_packets=3, n_bytes=180, actions=load:0x3->NXM_NX_REG0[0..15],learn(table=0,hard_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2
 n_packets=3, n_bytes=180, hard_timeout=5, priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:06 actions=output:3
NXST_FLOW reply:
]])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([learning action - fin_timeout feature])
# This is a totally artificial use of the "learn" action.  The only purpose
# is to check that specifying fin_idle_timeout or fin_hard_timeout causes
# a corresponding fin_timeout action to end up in the learned flows.
OVS_VSWITCHD_START(
    [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1])
AT_CHECK([[ovs-ofctl add-flow br0 'actions=learn(fin_hard_timeout=10, fin_idle_timeout=5, NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[])']])
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy 'in_port(1),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [ignore])
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip], [0],
[NXST_FLOW reply:
 table=1, dl_dst=50:54:00:00:00:05 actions=fin_timeout(idle_timeout=5,hard_timeout=10),output:1
])
OVS_VSWITCHD_STOP
AT_CLEANUP