path: root/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch

From 6ca94d2e7dc72b21703e6d9be4e8ec3ad4a26f41 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Wed, 17 Apr 2019 18:59:02 +0800
Subject: [PATCH] sdhc: support layerscape

This is an integrated patch of sdhc for layerscape

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
 drivers/mmc/core/mmc.c            |   3 +
 drivers/mmc/host/sdhci-esdhc.h    |  25 +++
 drivers/mmc/host/sdhci-of-esdhc.c | 270 ++++++++++++++++++++++++++----
 drivers/mmc/host/sdhci.c          |   9 +-
 drivers/mmc/host/sdhci.h          |   1 +
 include/linux/mmc/card.h          |   1 +
 include/linux/mmc/host.h          |   2 +
 7 files changed, 272 insertions(+), 39 deletions(-)

--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1180,6 +1180,9 @@ static int mmc_select_hs400(struct mmc_c
 		goto out_err;
 
 	/* Switch card to DDR */
+	if (host->ops->prepare_ddr_to_hs400)
+		host->ops->prepare_ddr_to_hs400(host);
+
 	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			 EXT_CSD_BUS_WIDTH,
 			 EXT_CSD_DDR_BUS_WIDTH_8,
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -59,7 +59,32 @@
 
 /* Tuning Block Control Register */
 #define ESDHC_TBCTL			0x120
+#define ESDHC_HS400_WNDW_ADJUST		0x00000040
+#define ESDHC_HS400_MODE		0x00000010
 #define ESDHC_TB_EN			0x00000004
+#define ESDHC_TBPTR			0x128
+
+/* SD Clock Control Register */
+#define ESDHC_SDCLKCTL			0x144
+#define ESDHC_LPBK_CLK_SEL		0x80000000
+#define ESDHC_CMD_CLK_CTL		0x00008000
+
+/* SD Timing Control Register */
+#define ESDHC_SDTIMNGCTL		0x148
+#define ESDHC_FLW_CTL_BG		0x00008000
+
+/* DLL Config 0 Register */
+#define ESDHC_DLLCFG0			0x160
+#define ESDHC_DLL_ENABLE		0x80000000
+#define ESDHC_DLL_FREQ_SEL		0x08000000
+
+/* DLL Config 1 Register */
+#define ESDHC_DLLCFG1			0x164
+#define ESDHC_DLL_PD_PULSE_STRETCH_SEL	0x80000000
+
+/* DLL Status 0 Register */
+#define ESDHC_DLLSTAT0			0x170
+#define ESDHC_DLL_STS_SLV_LOCK		0x08000000
 
 /* Control Register for DMA transfer */
 #define ESDHC_DMA_SYSCTL		0x40c
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -30,11 +30,61 @@
 #define VENDOR_V_22	0x12
 #define VENDOR_V_23	0x13
 
+#define MMC_TIMING_NUM (MMC_TIMING_MMC_HS400 + 1)
+
+struct esdhc_clk_fixup {
+	const unsigned int sd_dflt_max_clk;
+	const unsigned int max_clk[MMC_TIMING_NUM];
+};
+
+static const struct esdhc_clk_fixup ls1021a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_MMC_HS] = 46500000,
+	.max_clk[MMC_TIMING_SD_HS] = 46500000,
+};
+
+static const struct esdhc_clk_fixup ls1046a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_UHS_SDR104] = 167000000,
+	.max_clk[MMC_TIMING_MMC_HS200] = 167000000,
+};
+
+static const struct esdhc_clk_fixup ls1012a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_UHS_SDR104] = 125000000,
+	.max_clk[MMC_TIMING_MMC_HS200] = 125000000,
+};
+
+static const struct esdhc_clk_fixup p1010_esdhc_clk = {
+	.sd_dflt_max_clk = 20000000,
+	.max_clk[MMC_TIMING_LEGACY] = 20000000,
+	.max_clk[MMC_TIMING_MMC_HS] = 42000000,
+	.max_clk[MMC_TIMING_SD_HS] = 40000000,
+};
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+	{ .compatible = "fsl,ls1021a-esdhc", .data = &ls1021a_esdhc_clk},
+	{ .compatible = "fsl,ls1046a-esdhc", .data = &ls1046a_esdhc_clk},
+	{ .compatible = "fsl,ls1012a-esdhc", .data = &ls1012a_esdhc_clk},
+	{ .compatible = "fsl,p1010-esdhc",   .data = &p1010_esdhc_clk},
+	{ .compatible = "fsl,mpc8379-esdhc" },
+	{ .compatible = "fsl,mpc8536-esdhc" },
+	{ .compatible = "fsl,esdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
 struct sdhci_esdhc {
 	u8 vendor_ver;
 	u8 spec_ver;
 	bool quirk_incorrect_hostver;
+	bool quirk_limited_clk_division;
+	bool quirk_unreliable_pulse_detection;
+	bool quirk_fixup_tuning;
+	bool quirk_incorrect_delay_chain;
 	unsigned int peripheral_clock;
+	const struct esdhc_clk_fixup *clk_fixup;
+	u32 div_ratio;
 };
 
 /**
@@ -500,13 +550,20 @@ static void esdhc_clock_enable(struct sd
 	}
 }
 
+static struct soc_device_attribute soc_incorrect_delay_chain[] = {
+	{ .family = "QorIQ LX2160A", .revision = "1.0", },
+	{ },
+};
+
 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
 	int pre_div = 1;
 	int div = 1;
+	int division;
 	ktime_t timeout;
+	long fixup = 0;
 	u32 temp;
 
 	host->mmc->actual_clock = 0;
@@ -520,27 +577,14 @@ static void esdhc_of_set_clock(struct sd
 	if (esdhc->vendor_ver < VENDOR_V_23)
 		pre_div = 2;
 
-	/*
-	 * Limit SD clock to 167MHz for ls1046a according to its datasheet
-	 */
-	if (clock > 167000000 &&
-	    of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc"))
-		clock = 167000000;
+	if (host->mmc->card && mmc_card_sd(host->mmc->card) &&
+		esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
+		fixup = esdhc->clk_fixup->sd_dflt_max_clk;
+	else if (esdhc->clk_fixup)
+		fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
 
-	/*
-	 * Limit SD clock to 125MHz for ls1012a according to its datasheet
-	 */
-	if (clock > 125000000 &&
-	    of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc"))
-		clock = 125000000;
-
-	/* Workaround to reduce the clock frequency for p1010 esdhc */
-	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
-		if (clock > 20000000)
-			clock -= 5000000;
-		if (clock > 40000000)
-			clock -= 5000000;
-	}
+	if (fixup && clock > fixup)
+		clock = fixup;
 
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
@@ -553,9 +597,30 @@ static void esdhc_of_set_clock(struct sd
 	while (host->max_clk / pre_div / div > clock && div < 16)
 		div++;
 
+	if (esdhc->quirk_limited_clk_division &&
+	    clock == MMC_HS200_MAX_DTR &&
+	    (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 ||
+	     host->flags & SDHCI_HS400_TUNING)) {
+		division = pre_div * div;
+		if (division <= 4) {
+			pre_div = 4;
+			div = 1;
+		} else if (division <= 8) {
+			pre_div = 4;
+			div = 2;
+		} else if (division <= 12) {
+			pre_div = 4;
+			div = 3;
+		} else {
+			pr_warn("%s: using upsupported clock division.\n",
+				mmc_hostname(host->mmc));
+		}
+	}
+
 	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
 		clock, host->max_clk / pre_div / div);
 	host->mmc->actual_clock = host->max_clk / pre_div / div;
+	esdhc->div_ratio = pre_div * div;
 	pre_div >>= 1;
 	div--;
 
@@ -565,6 +630,29 @@ static void esdhc_of_set_clock(struct sd
 		| (pre_div << ESDHC_PREDIV_SHIFT));
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
+	if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
+	    clock == MMC_HS200_MAX_DTR) {
+		temp = sdhci_readl(host, ESDHC_TBCTL);
+		sdhci_writel(host, temp | ESDHC_HS400_MODE, ESDHC_TBCTL);
+		temp = sdhci_readl(host, ESDHC_SDCLKCTL);
+		sdhci_writel(host, temp | ESDHC_CMD_CLK_CTL, ESDHC_SDCLKCTL);
+		esdhc_clock_enable(host, true);
+
+		temp = sdhci_readl(host, ESDHC_DLLCFG0);
+		temp |= ESDHC_DLL_ENABLE;
+		if (host->mmc->actual_clock == MMC_HS200_MAX_DTR ||
+		    esdhc->quirk_incorrect_delay_chain == false)
+			temp |= ESDHC_DLL_FREQ_SEL;
+		sdhci_writel(host, temp, ESDHC_DLLCFG0);
+		temp = sdhci_readl(host, ESDHC_TBCTL);
+		sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
+
+		esdhc_clock_enable(host, false);
+		temp = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+		temp |= ESDHC_FLUSH_ASYNC_FIFO;
+		sdhci_writel(host, temp, ESDHC_DMA_SYSCTL);
+	}
+
 	/* Wait max 20 ms */
 	timeout = ktime_add_ms(ktime_get(), 20);
 	while (1) {
@@ -580,6 +668,7 @@ static void esdhc_of_set_clock(struct sd
 		udelay(10);
 	}
 
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp |= ESDHC_CLOCK_SDCLKEN;
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 }
@@ -608,6 +697,8 @@ static void esdhc_pltfm_set_bus_width(st
 
 static void esdhc_reset(struct sdhci_host *host, u8 mask)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
 	u32 val;
 
 	sdhci_reset(host, mask);
@@ -619,6 +710,12 @@ static void esdhc_reset(struct sdhci_hos
 		val = sdhci_readl(host, ESDHC_TBCTL);
 		val &= ~ESDHC_TB_EN;
 		sdhci_writel(host, val, ESDHC_TBCTL);
+
+		if (esdhc->quirk_unreliable_pulse_detection) {
+			val = sdhci_readl(host, ESDHC_DLLCFG1);
+			val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL;
+			sdhci_writel(host, val, ESDHC_DLLCFG1);
+		}
 	}
 }
 
@@ -630,6 +727,7 @@ static void esdhc_reset(struct sdhci_hos
 static const struct of_device_id scfg_device_ids[] = {
 	{ .compatible = "fsl,t1040-scfg", },
 	{ .compatible = "fsl,ls1012a-scfg", },
+	{ .compatible = "fsl,ls1043a-scfg", },
 	{ .compatible = "fsl,ls1046a-scfg", },
 	{}
 };
@@ -692,23 +790,91 @@ static int esdhc_signal_voltage_switch(s
 	}
 }
 
-static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+static struct soc_device_attribute soc_fixup_tuning[] = {
+	{ .family = "QorIQ T1040", .revision = "1.0", },
+	{ .family = "QorIQ T2080", .revision = "1.0", },
+	{ .family = "QorIQ T1023", .revision = "1.0", },
+	{ .family = "QorIQ LS1021A", .revision = "1.0", },
+	{ .family = "QorIQ LS1080A", .revision = "1.0", },
+	{ .family = "QorIQ LS2080A", .revision = "1.0", },
+	{ .family = "QorIQ LS1012A", .revision = "1.0", },
+	{ .family = "QorIQ LS1043A", .revision = "1.*", },
+	{ .family = "QorIQ LS1046A", .revision = "1.0", },
+	{ },
+};
+
+static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable)
 {
-	struct sdhci_host *host = mmc_priv(mmc);
 	u32 val;
 
-	/* Use tuning block for tuning procedure */
 	esdhc_clock_enable(host, false);
+
 	val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
 	val |= ESDHC_FLUSH_ASYNC_FIFO;
 	sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
 
 	val = sdhci_readl(host, ESDHC_TBCTL);
-	val |= ESDHC_TB_EN;
+	if (enable)
+		val |= ESDHC_TB_EN;
+	else
+		val &= ~ESDHC_TB_EN;
 	sdhci_writel(host, val, ESDHC_TBCTL);
+
 	esdhc_clock_enable(host, true);
+}
+
+static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+	bool hs400_tuning;
+	u32 val;
+	int ret;
+
+	if (esdhc->quirk_limited_clk_division &&
+	    host->flags & SDHCI_HS400_TUNING)
+		esdhc_of_set_clock(host, host->clock);
+
+	esdhc_tuning_block_enable(host, true);
+
+	hs400_tuning = host->flags & SDHCI_HS400_TUNING;
+	ret = sdhci_execute_tuning(mmc, opcode);
+
+	if (hs400_tuning) {
+		val = sdhci_readl(host, ESDHC_SDTIMNGCTL);
+		val |= ESDHC_FLW_CTL_BG;
+		sdhci_writel(host, val, ESDHC_SDTIMNGCTL);
+	}
 
-	return sdhci_execute_tuning(mmc, opcode);
+	if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) {
+
+		/* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and
+		 * program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO
+		 */
+		val = sdhci_readl(host, ESDHC_TBPTR);
+		val = (val & ~((0x7f << 8) | 0x7f)) |
+		(3 * esdhc->div_ratio) | ((5 * esdhc->div_ratio) << 8);
+		sdhci_writel(host, val, ESDHC_TBPTR);
+
+		/* program the software tuning mode by setting
+		 * TBCTL[TB_MODE]=2'h3
+		 */
+		val = sdhci_readl(host, ESDHC_TBCTL);
+		val |= 0x3;
+		sdhci_writel(host, val, ESDHC_TBCTL);
+		sdhci_execute_tuning(mmc, opcode);
+	}
+	return ret;
+}
+
+static void esdhc_set_uhs_signaling(struct sdhci_host *host,
+				   unsigned int timing)
+{
+	if (timing == MMC_TIMING_MMC_HS400)
+		esdhc_tuning_block_enable(host, true);
+	else
+		sdhci_set_uhs_signaling(host, timing);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -757,7 +923,7 @@ static const struct sdhci_ops sdhci_esdh
 	.adma_workaround = esdhc_of_adma_workaround,
 	.set_bus_width = esdhc_pltfm_set_bus_width,
 	.reset = esdhc_reset,
-	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.set_uhs_signaling = esdhc_set_uhs_signaling,
 };
 
 static const struct sdhci_ops sdhci_esdhc_le_ops = {
@@ -774,7 +940,7 @@ static const struct sdhci_ops sdhci_esdh
 	.adma_workaround = esdhc_of_adma_workaround,
 	.set_bus_width = esdhc_pltfm_set_bus_width,
 	.reset = esdhc_reset,
-	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.set_uhs_signaling = esdhc_set_uhs_signaling,
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
@@ -800,8 +966,20 @@ static struct soc_device_attribute soc_i
 	{ },
 };
 
+static struct soc_device_attribute soc_fixup_sdhc_clkdivs[] = {
+	{ .family = "QorIQ LX2160A", .revision = "1.0", },
+	{ .family = "QorIQ LX2160A", .revision = "2.0", },
+	{ },
+};
+
+static struct soc_device_attribute soc_unreliable_pulse_detection[] = {
+	{ .family = "QorIQ LX2160A", .revision = "1.0", },
+	{ },
+};
+
 static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
 {
+	const struct of_device_id *match;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_esdhc *esdhc;
 	struct device_node *np;
@@ -821,6 +999,24 @@ static void esdhc_init(struct platform_d
 	else
 		esdhc->quirk_incorrect_hostver = false;
 
+	if (soc_device_match(soc_fixup_sdhc_clkdivs))
+		esdhc->quirk_limited_clk_division = true;
+	else
+		esdhc->quirk_limited_clk_division = false;
+
+	if (soc_device_match(soc_unreliable_pulse_detection))
+		esdhc->quirk_unreliable_pulse_detection = true;
+	else
+		esdhc->quirk_unreliable_pulse_detection = false;
+
+	if (soc_device_match(soc_incorrect_delay_chain))
+		esdhc->quirk_incorrect_delay_chain = true;
+	else
+		esdhc->quirk_incorrect_delay_chain = false;
+
+	match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node);
+	if (match)
+		esdhc->clk_fixup = match->data;
 	np = pdev->dev.of_node;
 	clk = of_clk_get(np, 0);
 	if (!IS_ERR(clk)) {
@@ -848,6 +1044,12 @@ static void esdhc_init(struct platform_d
 	}
 }
 
+static int esdhc_prepare_ddr_to_hs400(struct mmc_host *mmc)
+{
+	esdhc_tuning_block_enable(mmc_priv(mmc), false);
+	return 0;
+}
+
 static int sdhci_esdhc_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
@@ -871,6 +1073,7 @@ static int sdhci_esdhc_probe(struct plat
 	host->mmc_host_ops.start_signal_voltage_switch =
 		esdhc_signal_voltage_switch;
 	host->mmc_host_ops.execute_tuning = esdhc_execute_tuning;
+	host->mmc_host_ops.prepare_ddr_to_hs400 = esdhc_prepare_ddr_to_hs400;
 	host->tuning_delay = 1;
 
 	esdhc_init(pdev, host);
@@ -879,6 +1082,11 @@ static int sdhci_esdhc_probe(struct plat
 
 	pltfm_host = sdhci_priv(host);
 	esdhc = sdhci_pltfm_priv(pltfm_host);
+	if (soc_device_match(soc_fixup_tuning))
+		esdhc->quirk_fixup_tuning = true;
+	else
+		esdhc->quirk_fixup_tuning = false;
+
 	if (esdhc->vendor_ver == VENDOR_V_22)
 		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
 
@@ -925,14 +1133,6 @@ static int sdhci_esdhc_probe(struct plat
 	return ret;
 }
 
-static const struct of_device_id sdhci_esdhc_of_match[] = {
-	{ .compatible = "fsl,mpc8379-esdhc" },
-	{ .compatible = "fsl,mpc8536-esdhc" },
-	{ .compatible = "fsl,esdhc" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
-
 static struct platform_driver sdhci_esdhc_driver = {
 	.driver = {
 		.name = "sdhci-esdhc",
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2158,7 +2158,7 @@ static void sdhci_send_tuning(struct sdh
 
 }
 
-static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
+static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
 	int i;
 
@@ -2175,13 +2175,13 @@ static void __sdhci_execute_tuning(struc
 			pr_debug("%s: Tuning timeout, falling back to fixed sampling clock\n",
 				 mmc_hostname(host->mmc));
 			sdhci_abort_tuning(host, opcode);
-			return;
+			return -ETIMEDOUT;
 		}
 
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 		if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
 			if (ctrl & SDHCI_CTRL_TUNED_CLK)
-				return; /* Success! */
+				return 0; /* Success! */
 			break;
 		}
 
@@ -2193,6 +2193,7 @@ static void __sdhci_execute_tuning(struc
 	pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
 		mmc_hostname(host->mmc));
 	sdhci_reset_tuning(host);
+	return -EAGAIN;
 }
 
 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
@@ -2254,7 +2255,7 @@ int sdhci_execute_tuning(struct mmc_host
 
 	sdhci_start_tuning(host);
 
-	__sdhci_execute_tuning(host, opcode);
+	host->tuning_err = __sdhci_execute_tuning(host, opcode);
 
 	sdhci_end_tuning(host);
 out:
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -546,6 +546,7 @@ struct sdhci_host {
 
 	unsigned int		tuning_count;	/* Timer count for re-tuning */
 	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
+	unsigned int		tuning_err;	/* Error code for re-tuning */
 #define SDHCI_TUNING_MODE_1	0
 #define SDHCI_TUNING_MODE_2	1
 #define SDHCI_TUNING_MODE_3	2
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -156,6 +156,7 @@ struct sd_switch_caps {
 #define UHS_DDR50_MAX_DTR	50000000
 #define UHS_SDR25_MAX_DTR	UHS_DDR50_MAX_DTR
 #define UHS_SDR12_MAX_DTR	25000000
+#define DEFAULT_SPEED_MAX_DTR	UHS_SDR12_MAX_DTR
 	unsigned int		sd3_bus_mode;
 #define UHS_SDR12_BUS_SPEED	0
 #define HIGH_SPEED_BUS_SPEED	1
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -145,6 +145,8 @@ struct mmc_host_ops {
 
 	/* Prepare HS400 target operating frequency depending host driver */
 	int	(*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
+	int     (*prepare_ddr_to_hs400)(struct mmc_host *host);
+
 	/* Prepare enhanced strobe depending host driver */
 	void	(*hs400_enhanced_strobe)(struct mmc_host *host,
 					 struct mmc_ios *ios);