# Copyright (C) 2003-2007 Robey Pointer # # This file is part of paramiko. # # Paramiko is free software; you can redistribute it and/or modify it under the # terms of the GNU Lesser General Public License as published by the Free # Software Foundation; either version 2.1 of the License, or (at your option) # any later version. # # Paramiko is distributed in the hope that it will be useful, but WITHOUT ANY # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR # A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more # details. # # You should have received a copy of the GNU Lesser General Public License # along with Paramiko; if not, write to the Free Software Foundation, Inc., # 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. """ Abstraction for an SSH2 channel. """ import binascii import os import socket import time import threading # TODO: switch as much of py3compat.py to 'six' as possible, then use six.wraps from functools import wraps from paramiko import util from paramiko.common import ( cMSG_CHANNEL_REQUEST, cMSG_CHANNEL_WINDOW_ADJUST, cMSG_CHANNEL_DATA, cMSG_CHANNEL_EXTENDED_DATA, DEBUG, ERROR, cMSG_CHANNEL_SUCCESS, cMSG_CHANNEL_FAILURE, cMSG_CHANNEL_EOF, cMSG_CHANNEL_CLOSE, ) from paramiko.message import Message from paramiko.py3compat import bytes_types from paramiko.ssh_exception import SSHException from paramiko.file import BufferedFile from paramiko.buffered_pipe import BufferedPipe, PipeTimeout from paramiko import pipe from paramiko.util import ClosingContextManager def open_only(func): """ Decorator for `.Channel` methods which performs an openness check. :raises SSHException: If the wrapped method is called on an unopened `.Channel`. """ @wraps(func) def _check(self, *args, **kwds): if ( self.closed or self.eof_received or self.eof_sent or not self.active ): raise SSHException('Channel is not open') return func(self, *args, **kwds) return _check class Channel (ClosingContextManager): """ A secure tunnel across an SSH `.Transport`. A Channel is meant to behave like a socket, and has an API that should be indistinguishable from the Python socket API. Because SSH2 has a windowing kind of flow control, if you stop reading data from a Channel and its buffer fills up, the server will be unable to send you any more data until you read some of it. (This won't affect other channels on the same transport -- all channels on a single transport are flow-controlled independently.) Similarly, if the server isn't reading data you send, calls to `send` may block, unless you set a timeout. This is exactly like a normal network socket, so it shouldn't be too surprising. Instances of this class may be used as context managers. """ def __init__(self, chanid): """ Create a new channel. The channel is not associated with any particular session or `.Transport` until the Transport attaches it. Normally you would only call this method from the constructor of a subclass of `.Channel`. :param int chanid: the ID of this channel, as passed by an existing `.Transport`. """ #: Channel ID self.chanid = chanid #: Remote channel ID self.remote_chanid = 0 #: `.Transport` managing this channel self.transport = None #: Whether the connection is presently active self.active = False self.eof_received = 0 self.eof_sent = 0 self.in_buffer = BufferedPipe() self.in_stderr_buffer = BufferedPipe() self.timeout = None #: Whether the connection has been closed self.closed = False self.ultra_debug = False self.lock = threading.Lock() self.out_buffer_cv = threading.Condition(self.lock) self.in_window_size = 0 self.out_window_size = 0 self.in_max_packet_size = 0 self.out_max_packet_size = 0 self.in_window_threshold = 0 self.in_window_sofar = 0 self.status_event = threading.Event() self._name = str(chanid) self.logger = util.get_logger('paramiko.transport') self._pipe = None self.event = threading.Event() self.event_ready = False self.combine_stderr = False self.exit_status = -1 self.origin_addr = None def __del__(self): try: self.close() except: pass def __repr__(self): """ Return a string representation of this object, for debugging. """ out = ' 0: out += ' in-buffer=%d' % (len(self.in_buffer),) out += ' -> ' + repr(self.transport) out += '>' return out @open_only def get_pty(self, term='vt100', width=80, height=24, width_pixels=0, height_pixels=0): """ Request a pseudo-terminal from the server. This is usually used right after creating a client channel, to ask the server to provide some basic terminal semantics for a shell invoked with `invoke_shell`. It isn't necessary (or desirable) to call this method if you're going to execute a single command with `exec_command`. :param str term: the terminal type to emulate (for example, ``'vt100'``) :param int width: width (in characters) of the terminal screen :param int height: height (in characters) of the terminal screen :param int width_pixels: width (in pixels) of the terminal screen :param int height_pixels: height (in pixels) of the terminal screen :raises SSHException: if the request was rejected or the channel was closed """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('pty-req') m.add_boolean(True) m.add_string(term) m.add_int(width) m.add_int(height) m.add_int(width_pixels) m.add_int(height_pixels) m.add_string(bytes()) self._event_pending() self.transport._send_user_message(m) self._wait_for_event() @open_only def invoke_shell(self): """ Request an interactive shell session on this channel. If the server allows it, the channel will then be directly connected to the stdin, stdout, and stderr of the shell. Normally you would call `get_pty` before this, in which case the shell will operate through the pty, and the channel will be connected to the stdin and stdout of the pty. When the shell exits, the channel will be closed and can't be reused. You must open a new channel if you wish to open another shell. :raises SSHException: if the request was rejected or the channel was closed """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('shell') m.add_boolean(True) self._event_pending() self.transport._send_user_message(m) self._wait_for_event() @open_only def exec_command(self, command): """ Execute a command on the server. If the server allows it, the channel will then be directly connected to the stdin, stdout, and stderr of the command being executed. When the command finishes executing, the channel will be closed and can't be reused. You must open a new channel if you wish to execute another command. :param str command: a shell command to execute. :raises SSHException: if the request was rejected or the channel was closed """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('exec') m.add_boolean(True) m.add_string(command) self._event_pending() self.transport._send_user_message(m) self._wait_for_event() @open_only def invoke_subsystem(self, subsystem): """ Request a subsystem on the server (for example, ``sftp``). If the server allows it, the channel will then be directly connected to the requested subsystem. When the subsystem finishes, the channel will be closed and can't be reused. :param str subsystem: name of the subsystem being requested. :raises SSHException: if the request was rejected or the channel was closed """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('subsystem') m.add_boolean(True) m.add_string(subsystem) self._event_pending() self.transport._send_user_message(m) self._wait_for_event() @open_only def resize_pty(self, width=80, height=24, width_pixels=0, height_pixels=0): """ Resize the pseudo-terminal. This can be used to change the width and height of the terminal emulation created in a previous `get_pty` call. :param int width: new width (in characters) of the terminal screen :param int height: new height (in characters) of the terminal screen :param int width_pixels: new width (in pixels) of the terminal screen :param int height_pixels: new height (in pixels) of the terminal screen :raises SSHException: if the request was rejected or the channel was closed """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('window-change') m.add_boolean(False) m.add_int(width) m.add_int(height) m.add_int(width_pixels) m.add_int(height_pixels) self.transport._send_user_message(m) @open_only def update_environment(self, environment): """ Updates this channel's remote shell environment. .. note:: This operation is additive - i.e. the current environment is not reset before the given environment variables are set. .. warning:: Servers may silently reject some environment variables; see the warning in `set_environment_variable` for details. :param dict environment: a dictionary containing the name and respective values to set :raises SSHException: if any of the environment variables was rejected by the server or the channel was closed """ for name, value in environment.items(): try: self.set_environment_variable(name, value) except SSHException as e: err = "Failed to set environment variable \"{0}\"." raise SSHException(err.format(name), e) @open_only def set_environment_variable(self, name, value): """ Set the value of an environment variable. .. warning:: The server may reject this request depending on its ``AcceptEnv`` setting; such rejections will fail silently (which is common client practice for this particular request type). Make sure you understand your server's configuration before using! :param str name: name of the environment variable :param str value: value of the environment variable :raises SSHException: if the request was rejected or the channel was closed """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('env') m.add_boolean(False) m.add_string(name) m.add_string(value) self.transport._send_user_message(m) def exit_status_ready(self): """ Return true if the remote process has exited and returned an exit status. You may use this to poll the process status if you don't want to block in `recv_exit_status`. Note that the server may not return an exit status in some cases (like bad servers). :return: ``True`` if `recv_exit_status` will return immediately, else ``False``. .. versionadded:: 1.7.3 """ return self.closed or self.status_event.is_set() def recv_exit_status(self): """ Return the exit status from the process on the server. This is mostly useful for retrieving the results of an `exec_command`. If the command hasn't finished yet, this method will wait until it does, or until the channel is closed. If no exit status is provided by the server, -1 is returned. .. warning:: In some situations, receiving remote output larger than the current `.Transport` or session's ``window_size`` (e.g. that set by the ``default_window_size`` kwarg for `.Transport.__init__`) will cause `.recv_exit_status` to hang indefinitely if it is called prior to a sufficiently large `~Channel..read` (or if there are no threads calling `~Channel.read` in the background). In these cases, ensuring that `.recv_exit_status` is called *after* `~Channel.read` (or, again, using threads) can avoid the hang. :return: the exit code (as an `int`) of the process on the server. .. versionadded:: 1.2 """ self.status_event.wait() assert self.status_event.is_set() return self.exit_status def send_exit_status(self, status): """ Send the exit status of an executed command to the client. (This really only makes sense in server mode.) Many clients expect to get some sort of status code back from an executed command after it completes. :param int status: the exit code of the process .. versionadded:: 1.2 """ # in many cases, the channel will not still be open here. # that's fine. m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('exit-status') m.add_boolean(False) m.add_int(status) self.transport._send_user_message(m) @open_only def request_x11( self, screen_number=0, auth_protocol=None, auth_cookie=None, single_connection=False, handler=None ): """ Request an x11 session on this channel. If the server allows it, further x11 requests can be made from the server to the client, when an x11 application is run in a shell session. From :rfc:`4254`:: It is RECOMMENDED that the 'x11 authentication cookie' that is sent be a fake, random cookie, and that the cookie be checked and replaced by the real cookie when a connection request is received. If you omit the auth_cookie, a new secure random 128-bit value will be generated, used, and returned. You will need to use this value to verify incoming x11 requests and replace them with the actual local x11 cookie (which requires some knowledge of the x11 protocol). If a handler is passed in, the handler is called from another thread whenever a new x11 connection arrives. The default handler queues up incoming x11 connections, which may be retrieved using `.Transport.accept`. The handler's calling signature is:: handler(channel: Channel, (address: str, port: int)) :param int screen_number: the x11 screen number (0, 10, etc.) :param str auth_protocol: the name of the X11 authentication method used; if none is given, ``"MIT-MAGIC-COOKIE-1"`` is used :param str auth_cookie: hexadecimal string containing the x11 auth cookie; if none is given, a secure random 128-bit value is generated :param bool single_connection: if True, only a single x11 connection will be forwarded (by default, any number of x11 connections can arrive over this session) :param function handler: an optional handler to use for incoming X11 connections :return: the auth_cookie used """ if auth_protocol is None: auth_protocol = 'MIT-MAGIC-COOKIE-1' if auth_cookie is None: auth_cookie = binascii.hexlify(os.urandom(16)) m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('x11-req') m.add_boolean(True) m.add_boolean(single_connection) m.add_string(auth_protocol) m.add_string(auth_cookie) m.add_int(screen_number) self._event_pending() self.transport._send_user_message(m) self._wait_for_event() self.transport._set_x11_handler(handler) return auth_cookie @open_only def request_forward_agent(self, handler): """ Request for a forward SSH Agent on this channel. This is only valid for an ssh-agent from OpenSSH !!! :param function handler: a required handler to use for incoming SSH Agent connections :return: True if we are ok, else False (at that time we always return ok) :raises: SSHException in case of channel problem. """ m = Message() m.add_byte(cMSG_CHANNEL_REQUEST) m.add_int(self.remote_chanid) m.add_string('auth-agent-req@openssh.com') m.add_boolean(False) self.transport._send_user_message(m) self.transport._set_forward_agent_handler(handler) return True def get_transport(self): """ Return the `.Transport` associated with this channel. """ return self.transport def set_name(self, name): """ Set a name for this channel. Currently it's only used to set the name of the channel in logfile entries. The name can be fetched with the `get_name` method. :param str name: new channel name """ self._name = name def get_name(self): """ Get the name of this channel that was previously set by `set_name`. """ return self._name def get_id(self): """ Return the `int` ID # for this channel. The channel ID is unique across a `.Transport` and usually a small number. It's also the number passed to `.ServerInterface.check_channel_request` when determining whether to accept a channel request in server mode. """ return self.chanid def set_combine_stderr(self, combine): """ Set whether stderr should be combined into stdout on this channel. The default is ``False``, but in some cases it may be convenient to have both streams combined. If this is ``False``, and `exec_command` is called (or ``invoke_shell`` with no pty), output to stderr will not show up through the `recv` and `recv_ready` calls. You will have to use `recv_stderr` and `recv_stderr_ready` to get stderr output. If this is ``True``, data will never show up via `recv_stderr` or `recv_stderr_ready`. :param bool combine: ``True`` if stderr output should be combined into stdout on this channel. :return: the previous setting (a `bool`). .. versionadded:: 1.1 """ data = bytes() self.lock.acquire() try: old = self.combine_stderr self.combine_stderr = combine if combine and not old: # copy old stderr buffer into primary buffer data = self.in_stderr_buffer.empty() finally: self.lock.release() if len(data) > 0: self._feed(data) return old # ...socket API... def settimeout(self, timeout): """ Set a timeout on blocking read/write operations. The ``timeout`` argument can be a nonnegative float expressing seconds, or ``None``. If a float is given, subsequent channel read/write operations will raise a timeout exception if the timeout period value has elapsed before the operation has completed. Setting a timeout of ``None`` disables timeouts on socket operations. ``chan.settimeout(0.0)`` is equivalent to ``chan.setblocking(0)``; ``chan.settimeout(None)`` is equivalent to ``chan.setblocking(1)``. :param float timeout: seconds to wait for a pending read/write operation before raising ``socket.timeout``, or ``None`` for no timeout. """ self.timeout = timeout def gettimeout(self): """ Returns the timeout in seconds (as a float) associated with socket operations, or ``None`` if no timeout is set. This reflects the last call to `setblocking` or `settimeout`. """ return self.timeout def setblocking(self, blocking): """ Set blocking or non-blocking mode of the channel: if ``blocking`` is 0, the channel is set to non-blocking mode; otherwise it's set to blocking mode. Initially all channels are in blocking mode. In non-blocking mode, if a `recv` call doesn't find any data, or if a `send` call can't immediately dispose of the data, an error exception is raised. In blocking mode, the calls block until they can proceed. An EOF condition is considered "immediate data" for `recv`, so if the channel is closed in the read direction, it will never block. ``chan.setblocking(0)`` is equivalent to ``chan.settimeout(0)``; ``chan.setblocking(1)`` is equivalent to ``chan.settimeout(None)``. :param int blocking: 0 to set non-blocking mode; non-0 to set blocking mode. """ if blocking: self.settimeout(None) else: self.settimeout(0.0) def getpeername(self): """ Return the address of the remote side of this Channel, if possible. This simply wraps `.Transport.getpeername`, used to provide enough of a socket-like interface to allow asyncore to work. (asyncore likes to call ``'getpeername'``.) """ return self.transport.getpeername() def close(self): """ Close the channel. All future read/write operations on the channel will fail. The remote end will receive no more data (after queued data is flushed). Channels are automatically closed when their `.Transport` is closed or when they are garbage collected. """ self.lock.acquire() try: # only close the pipe when the user explicitly closes the channel. # otherwise they will get unpleasant surprises. (and do it before # checking self.closed, since the remote host may have already # closed the connection.) if self._pipe is not None: self._pipe.close() self._pipe = None if not self.active or self.closed: return msgs = self._close_internal() finally: self.lock.release() for m in msgs: if m is not None: self.transport._send_user_message(m) def recv_ready(self): """ Returns true if data is buffered and ready to be read from this channel. A ``False`` result does not mean that the channel has closed; it means you may need to wait before more data arrives. :return: ``True`` if a `recv` call on this channel would immediately return at least one byte; ``False`` otherwise. """ return self.in_buffer.read_ready() def recv(self, nbytes): """ Receive data from the channel. The return value is a string representing the data received. The maximum amount of data to be received at once is specified by ``nbytes``. If a string of length zero is returned, the channel stream has closed. :param int nbytes: maximum number of bytes to read. :return: received data, as a `bytes` :raises socket.timeout: if no data is ready before the timeout set by `settimeout`. """ try: out = self.in_buffer.read(nbytes, self.timeout) except PipeTimeout: raise socket.timeout() ack = self._check_add_window(len(out)) # no need to hold the channel lock when sending this if ack > 0: m = Message() m.add_byte(cMSG_CHANNEL_WINDOW_ADJUST) m.add_int(self.remote_chanid) m.add_int(ack) self.transport._send_user_message(m) return out def recv_stderr_ready(self): """ Returns true if data is buffered and ready to be read from this channel's stderr stream. Only channels using `exec_command` or `invoke_shell` without a pty will ever have data on the stderr stream. :return: ``True`` if a `recv_stderr` call on this channel would immediately return at least one byte; ``False`` otherwise. .. versionadded:: 1.1 """ return self.in_stderr_buffer.read_ready() def recv_stderr(self, nbytes): """ Receive data from the channel's stderr stream. Only channels using `exec_command` or `invoke_shell` without a pty will ever have data on the stderr stream. The return value is a string representing the data received. The maximum amount of data to be received at once is specified by ``nbytes``. If a string of length zero is returned, the channel stream has closed. :param int nbytes: maximum number of bytes to read. :return: received data as a `str` :raises socket.timeout: if no data is ready before the timeout set by `settimeout`. .. versionadded:: 1.1 """ try: out = self.in_stderr_buffer.read(nbytes, self.timeout) except PipeTimeout: raise socket.timeout() ack = self._check_add_window(len(out)) # no need to hold the channel lock when sending this if ack > 0: m = Message() m.add_byte(cMSG_CHANNEL_WINDOW_ADJUST) m.add_int(self.remote_chanid) m.add_int(ack) self.transport._send_user_message(m) return out def send_ready(self): """ Returns true if data can be written to this channel without blocking. This means the channel is either closed (so any write attempt would return immediately) or there is at least one byte of space in the outbound buffer. If there is at least one byte of space in the outbound buffer, a `send` call will succeed immediately and return the number of bytes actually written. :return: ``True`` if a `send` call on this channel would immediately succeed or fail """ self.lock.acquire() try: if self.closed or self.eof_sent: return True return self.out_window_size > 0 finally: self.lock.release() def send(self, s): """ Send data to the channel. Returns the number of bytes sent, or 0 if the channel stream is closed. Applications are responsible for checking that all data has been sent: if only some of the data was transmitted, the application needs to attempt delivery of the remaining data. :param str s: data to send :return: number of bytes actually sent, as an `int` :raises socket.timeout: if no data could be sent before the timeout set by `settimeout`. """ m = Message() m.add_byte(cMSG_CHANNEL_DATA) m.add_int(self.remote_chanid) return self._send(s, m) def send_stderr(self, s): """ Send data to the channel on the "stderr" stream. This is normally only used by servers to send output from shell commands -- clients won't use this. Returns the number of bytes sent, or 0 if the channel stream is closed. Applications are responsible for checking that all data has been sent: if only some of the data was transmitted, the application needs to attempt delivery of the remaining data. :param str s: data to send. :return: number of bytes actually sent, as an `int`. :raises socket.timeout: if no data could be sent before the timeout set by `settimeout`. .. versionadded:: 1.1 """ m = Message() m.add_byte(cMSG_CHANNEL_EXTENDED_DATA) m.add_int(self.remote_chanid) m.add_int(1) return self._send(s, m) def sendall(self, s): """ Send data to the channel, without allowing partial results. Unlike `send`, this method continues to send data from the given string until either all data has been sent or an error occurs. Nothing is returned. :param str s: data to send. :raises socket.timeout: if sending stalled for longer than the timeout set by `settimeout`. :raises socket.error: if an error occurred before the entire string was sent. .. note:: If the channel is closed while only part of the data has been sent, there is no way to determine how much data (if any) was sent. This is irritating, but identically follows Python's API. """ while s: sent = self.send(s) s = s[sent:] return None def sendall_stderr(self, s): """ Send data to the channel's "stderr" stream, without allowing partial results. Unlike `send_stderr`, this method continues to send data from the given string until all data has been sent or an error occurs. Nothing is returned. :param str s: data to send to the client as "stderr" output. :raises socket.timeout: if sending stalled for longer than the timeout set by `settimeout`. :raises socket.error: if an error occurred before the entire string was sent. .. versionadded:: 1.1 """ while s: sent = self.send_stderr(s) s = s[sent:] return None def makefile(self, *params): """ Return a file-like object associated with this channel. The optional ``mode`` and ``bufsize`` arguments are interpreted the same way as by the built-in ``file()`` function in Python. :return: `.ChannelFile` object which can be used for Python file I/O. """ return ChannelFile(*([self] + list(params))) def makefile_stderr(self, *params): """ Return a file-like object associated with this channel's stderr stream. Only channels using `exec_command` or `invoke_shell` without a pty will ever have data on the stderr stream. The optional ``mode`` and ``bufsize`` arguments are interpreted the same way as by the built-in ``file()`` function in Python. For a client, it only makes sense to open this file for reading. For a server, it only makes sense to open this file for writing. :return: `.ChannelFile` object which can be used for Python file I/O. .. versionadded:: 1.1 """ return ChannelStderrFile(*([self] + list(params))) def fileno(self): """ Returns an OS-level file descriptor which can be used for polling, but but not for reading or writing. This is primarily to allow Python's ``select`` module to work. The first time ``fileno`` is called on a channel, a pipe is created to simulate real OS-level file descriptor (FD) behavior. Because of this, two OS-level FDs are created, which will use up FDs faster than normal. (You won't notice this effect unless you have hundreds of channels open at the same time.) :return: an OS-level file descriptor (`int`) .. warning:: This method causes channel reads to be slightly less efficient. """ self.lock.acquire() try: if self._pipe is not None: return self._pipe.fileno() # create the pipe and feed in any existing data self._pipe = pipe.make_pipe() p1, p2 = pipe.make_or_pipe(self._pipe) self.in_buffer.set_event(p1) self.in_stderr_buffer.set_event(p2) return self._pipe.fileno() finally: self.lock.release() def shutdown(self, how): """ Shut down one or both halves of the connection. If ``how`` is 0, further receives are disallowed. If ``how`` is 1, further sends are disallowed. If ``how`` is 2, further sends and receives are disallowed. This closes the stream in one or both directions. :param int how: 0 (stop receiving), 1 (stop sending), or 2 (stop receiving and sending). """ if (how == 0) or (how == 2): # feign "read" shutdown self.eof_received = 1 if (how == 1) or (how == 2): self.lock.acquire() try: m = self._send_eof() finally: self.lock.release() if m is not None: self.transport._send_user_message(m) def shutdown_read(self): """ Shutdown the receiving side of this socket, closing the stream in the incoming direction. After this call, future reads on this channel will fail instantly. This is a convenience method, equivalent to ``shutdown(0)``, for people who don't make it a habit to memorize unix constants from the 1970s. .. versionadded:: 1.2 """ self.shutdown(0) def shutdown_write(self): """ Shutdown the sending side of this socket, closing the stream in the outgoing direction. After this call, future writes on this channel will fail instantly. This is a convenience method, equivalent to ``shutdown(1)``, for people who don't make it a habit to memorize unix constants from the 1970s. .. versionadded:: 1.2 """ self.shutdown(1) @property def _closed(self): # Concession to Python 3's socket API, which has a private ._closed # attribute instead of a semipublic .closed attribute. return self.closed # ...calls from Transport def _set_transport(self, transport): self.transport = transport self.logger = util.get_logger(self.transport.get_log_channel()) def _set_window(self, window_size, max_packet_size): self.in_window_size = window_size self.in_max_packet_size = max_packet_size # threshold of bytes we receive before we bother to send # a window update self.in_window_threshold = window_size // 10 self.in_window_sofar = 0 self._log(DEBUG, 'Max packet in: %d bytes' % max_packet_size) def _set_remote_channel(self, chanid, window_size, max_packet_size): self.remote_chanid = chanid self.out_window_size = window_size self.out_max_packet_size = self.transport._sanitize_packet_size( max_packet_size ) self.active = 1 self._log(DEBUG, 'Max packet out: %d bytes' % self.out_max_packet_size) def _request_success(self, m): self._log(DEBUG, 'Sesch channel %d request ok' % self.chanid) self.event_ready = True self.event.set() return def _request_failed(self, m): self.lock.acquire() try: msgs = self._close_internal() finally: self.lock.release() for m in msgs: if m is not None: self.transport._send_user_message(m) def _feed(self, m): if isinstance(m, bytes_types): # passed from _feed_extended s = m else: s = m.get_binary() self.in_buffer.feed(s) def _feed_extended(self, m): code = m.get_int() s = m.get_binary() if code != 1: self._log( ERROR, 'unknown extended_data type %d; discarding' % code ) return if self.combine_stderr: self._feed(s) else: self.in_stderr_buffer.feed(s) def _window_adjust(self, m): nbytes = m.get_int() self.lock.acquire() try: if self.ultra_debug: self._log(DEBUG, 'window up %d' % nbytes) self.out_window_size += nbytes self.out_buffer_cv.notifyAll() finally: self.lock.release() def _handle_request(self, m): key = m.get_text() want_reply = m.get_boolean() server = self.transport.server_object ok = False if key == 'exit-status': self.exit_status = m.get_int() self.status_event.set() ok = True elif key == 'xon-xoff': # ignore ok = True elif key == 'pty-req': term = m.get_string() width = m.get_int() height = m.get_int() pixelwidth = m.get_int() pixelheight = m.get_int() modes = m.get_string() if server is None: ok = False else: ok = server.check_channel_pty_request( self, term, width, height, pixelwidth, pixelheight, modes ) elif key == 'shell': if server is None: ok = False else: ok = server.check_channel_shell_request(self) elif key == 'env': name = m.get_string() value = m.get_string() if server is None: ok = False else: ok = server.check_channel_env_request(self, name, value) elif key == 'exec': cmd = m.get_string() if server is None: ok = False else: ok = server.check_channel_exec_request(self, cmd) elif key == 'subsystem': name = m.get_text() if server is None: ok = False else: ok = server.check_channel_subsystem_request(self, name) elif key == 'window-change': width = m.get_int() height = m.get_int() pixelwidth = m.get_int() pixelheight = m.get_int() if server is None: ok = False else: ok = server.check_channel_window_change_request( self, width, height, pixelwidth, pixelheight) elif key == 'x11-req': single_connection = m.get_boolean() auth_proto = m.get_text() auth_cookie = m.get_binary() screen_number = m.get_int() if server is None: ok = False else: ok = server.check_channel_x11_request( self, single_connection, auth_proto, auth_cookie, screen_number ) elif key == 'auth-agent-req@openssh.com': if server is None: ok = False else: ok = server.check_channel_forward_agent_request(self) else: self._log(DEBUG, 'Unhandled channel request "%s"' % key) ok = False if want_reply: m = Message() if ok: m.add_byte(cMSG_CHANNEL_SUCCESS) else: m.add_byte(cMSG_CHANNEL_FAILURE) m.add_int(self.remote_chanid) self.transport._send_user_message(m) def _handle_eof(self, m): self.lock.acquire() try: if not self.eof_received: self.eof_received = True self.in_buffer.close() self.in_stderr_buffer.close() if self._pipe is not None: self._pipe.set_forever() finally: self.lock.release() self._log(DEBUG, 'EOF received (%s)', self._name) def _handle_close(self, m): self.lock.acquire() try: msgs = self._close_internal() self.transport._unlink_channel(self.chanid) finally: self.lock.release() for m in msgs: if m is not None: self.transport._send_user_message(m) # ...internals... def _send(self, s, m): size = len(s) self.lock.acquire() try: if self.closed: # this doesn't seem useful, but it is the documented behavior # of Socket raise socket.error('Socket is closed') size = self._wait_for_send_window(size) if size == 0: # eof or similar return 0 m.add_string(s[:size]) finally: self.lock.release() # Note: We release self.lock before calling _send_user_message. # Otherwise, we can deadlock during re-keying. self.transport._send_user_message(m) return size def _log(self, level, msg, *args): self.logger.log(level, "[chan " + self._name + "] " + msg, *args) def _event_pending(self): self.event.clear() self.event_ready = False def _wait_for_event(self): self.event.wait() assert self.event.is_set() if self.event_ready: return e = self.transport.get_exception() if e is None: e = SSHException('Channel closed.') raise e def _set_closed(self): # you are holding the lock. self.closed = True self.in_buffer.close() self.in_stderr_buffer.close() self.out_buffer_cv.notifyAll() # Notify any waiters that we are closed self.event.set() self.status_event.set() if self._pipe is not None: self._pipe.set_forever() def _send_eof(self): # you are holding the lock. if self.eof_sent: return None m = Message() m.add_byte(cMSG_CHANNEL_EOF) m.add_int(self.remote_chanid) self.eof_sent = True self._log(DEBUG, 'EOF sent (%s)', self._name) return m def _close_internal(self): # you are holding the lock. if not self.active or self.closed: return None, None m1 = self._send_eof() m2 = Message() m2.add_byte(cMSG_CHANNEL_CLOSE) m2.add_int(self.remote_chanid) self._set_closed() # can't unlink from the Transport yet -- the remote side may still # try to send meta-data (exit-status, etc) return m1, m2 def _unlink(self): # server connection could die before we become active: # still signal the close! if self.closed: return self.lock.acquire() try: self._set_closed() self.transport._unlink_channel(self.chanid) finally: self.lock.release() def _check_add_window(self, n): self.lock.acquire() try: if self.closed or self.eof_received or not self.active: return 0 if self.ultra_debug: self._log(DEBUG, 'addwindow %d' % n) self.in_window_sofar += n if self.in_window_sofar <= self.in_window_threshold: return 0 if self.ultra_debug: self._log(DEBUG, 'addwindow send %d' % self.in_window_sofar) out = self.in_window_sofar self.in_window_sofar = 0 return out finally: self.lock.release() def _wait_for_send_window(self, size): """ (You are already holding the lock.) Wait for the send window to open up, and allocate up to ``size`` bytes for transmission. If no space opens up before the timeout, a timeout exception is raised. Returns the number of bytes available to send (may be less than requested). """ # you are already holding the lock if self.closed or self.eof_sent: return 0 if self.out_window_size == 0: # should we block? if self.timeout == 0.0: raise socket.timeout() # loop here in case we get woken up but a different thread has # filled the buffer timeout = self.timeout while self.out_window_size == 0: if self.closed or self.eof_sent: return 0 then = time.time() self.out_buffer_cv.wait(timeout) if timeout is not None: timeout -= time.time() - then if timeout <= 0.0: raise socket.timeout() # we have some window to squeeze into if self.closed or self.eof_sent: return 0 if self.out_window_size < size: size = self.out_window_size if self.out_max_packet_size - 64 < size: size = self.out_max_packet_size - 64 self.out_window_size -= size if self.ultra_debug: self._log(DEBUG, 'window down to %d' % self.out_window_size) return size class ChannelFile (BufferedFile): """ A file-like wrapper around `.Channel`. A ChannelFile is created by calling `Channel.makefile`. .. warning:: To correctly emulate the file object created from a socket's `makefile ` method, a `.Channel` and its `.ChannelFile` should be able to be closed or garbage-collected independently. Currently, closing the `ChannelFile` does nothing but flush the buffer. """ def __init__(self, channel, mode='r', bufsize=-1): self.channel = channel BufferedFile.__init__(self) self._set_mode(mode, bufsize) def __repr__(self): """ Returns a string representation of this object, for debugging. """ return '' def _read(self, size): return self.channel.recv(size) def _write(self, data): self.channel.sendall(data) return len(data) class ChannelStderrFile (ChannelFile): def __init__(self, channel, mode='r', bufsize=-1): ChannelFile.__init__(self, channel, mode, bufsize) def _read(self, size): return self.channel.recv_stderr(size) def _write(self, data): self.channel.sendall_stderr(data) return len(data) # vim: set shiftwidth=4 expandtab :