summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGurusamy Sarathy <gsar@cpan.org>2000-01-07 17:58:45 +0000
committerGurusamy Sarathy <gsar@cpan.org>2000-01-07 17:58:45 +0000
commit7bb57f2574a8c0390047c97cfadcd7cb89c929eb (patch)
tree323cb56fcdfaf660d3d511794f756857192c0630
parent10fb174d3304ec77030985046b9c2b94ecec02a8 (diff)
downloadperl-7bb57f2574a8c0390047c97cfadcd7cb89c929eb.tar.gz
VMS update (from Peter Prymmer <pvhp@forte.com>)
p4raw-id: //depot/perl@4767
-rw-r--r--README.vms49
-rw-r--r--configure.com143
-rw-r--r--vms/subconfigure.com5
3 files changed, 123 insertions, 74 deletions
diff --git a/README.vms b/README.vms
index 13a1f9bb51..d9ea97ea52 100644
--- a/README.vms
+++ b/README.vms
@@ -6,7 +6,7 @@ Originally by Charles Bailey <bailey@newman.upenn.edu>
The build and install procedures have changed significantly from the 5.004
releases! Make sure you read the "Building Perl" and "Installing Perl"
-sections before you build or install.
+sections of this document before you build or install.
Also note that, as of 5.005, an ANSI C compliant compiler is required to
build Perl. Vax C is *not* ANSI compliant, as it died a natural death some
@@ -84,7 +84,7 @@ Building perl has two steps, configuration and compilation.
To configure perl (a necessary first step), issue the command
-@CONFIGURE
+ @CONFIGURE
from the top of an unpacked perl directory. You'll be asked a series of
questions, and the answers to them (along with the capabilities of your C
@@ -96,7 +96,22 @@ you're using a version older than 5.2, check the Dec C Issues section.
The configuration script will print out, at the very end, the MMS or MMK
command you need to compile perl. Issue it (exactly as printed) to start
-the build.
+the build. If you have any symbols or logical names in your environment
+that may interfere with the build or regression testing of perl then
+configure.com will try to warn you about them. If a logical name is causing
+you trouble but is in an LNM table that you do not have write access to
+then try defining your own to a harmless equivalence string in a table
+such that it is resolved before the other (e.g. if TMP is defined in the
+SYSTEM table then try DEFINE TMP "NL:" or somesuch) otherwise simply deasign
+the dangerous logical names. The potentially troublesome logicals and
+symbols are:
+
+ TMP "LOGICAL"
+ LIB "LOGICAL"
+ T "LOGICAL"
+ FOO "LOGICAL"
+ EXT "LOGICAL"
+ TEST "SYMBOL"
Once you issue your MMS command, sit back and wait. Perl should build and
link without a problem. If it doesn't, check the Gotchas to watch out for
@@ -105,7 +120,7 @@ Instructions are in the Mailing Lists section.
As a handy shortcut, the command:
-@CONFIGURE "-des"
+ @CONFIGURE "-des"
(note the quotation marks and case) will choose reasonable defaults. (It
takes Dec C over Gnu C, Dec C sockets over SOCKETSHR sockets, and either
@@ -245,18 +260,18 @@ into DCLTABLES, replace it with just perl.
Execute the following command file to define PERL as a DCL command.
You'll need CMKRNL priv to install the new dcltables.exe.
-$ create perl.cld
-!
-! modify to reflect location of your perl.exe
-!
-define verb perl
- image perl_root:[000000]perl.exe
- cliflags (foreign)
-$!
-$ set command perl /table=sys$common:[syslib]dcltables.exe -
- /output=sys$common:[syslib]dcltables.exe
-$ install replace sys$common:[syslib]dcltables.exe
-$ exit
+ $ create perl.cld
+ !
+ ! modify to reflect location of your perl.exe
+ !
+ define verb perl
+ image perl_root:[000000]perl.exe
+ cliflags (foreign)
+ $!
+ $ set command perl /table=sys$common:[syslib]dcltables.exe -
+ /output=sys$common:[syslib]dcltables.exe
+ $ install replace sys$common:[syslib]dcltables.exe
+ $ exit
* Changing compile-time things
@@ -410,7 +425,7 @@ missed someone. That said, special thanks are due to the following:
for the getredirection() code
Rich Salz <rsalz@bbn.com>
for readdir() and related routines
- Peter Prymmer <pvhp@forte.com> or <pvhp@lns62.lns.cornell.edu>
+ Peter Prymmer <pvhp@forte.com>
for extensive testing, as well as development work on
configuration and documentation for VMS Perl,
Dan Sugalski <dan@sidhe.org>
diff --git a/configure.com b/configure.com
index cbc3bb7e32..87c1b81374 100644
--- a/configure.com
+++ b/configure.com
@@ -14,7 +14,7 @@ $! $ @Configure "-des"
$!
$! That's it. If you get into a bind trying to build perl on VMS then
$! definitely read through the README.VMS file.
-$! Beyond that send email to VMSPerl@cor.newman.upenn.edu
+$! Beyond that send email to vmsperl@perl.org
$!
$! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$!
@@ -24,8 +24,8 @@ $! Thank you!!!!
$!
$! Adapted and converted from Larry Wall & Andy Dougherty's
$! "Configure generated by metaconfig 3.0 PL60." by Peter Prymmer
-$! (a Bourne sh[ell] script for configuring the installation of perl on VMS)
-$! in the perl5.002|3 epoch (spring/summer 1996)
+$! (a Bourne sh[ell] script for configuring the installation of perl
+$! on non-VMS systems) in the perl5.002|3 epoch (spring/summer 1996)
$! with much valuable help from Charles Bailey &
$! the whole VMSPerl crew.
$! Extended and messed about with by Dan Sugalski
@@ -41,7 +41,7 @@ $ ans = ""
$ macros = ""
$ use_vmsdebug_perl = "N"
$ use_debugging_perl = "Y"
-$ use_64bit = "N"
+$ use_64bit = "n"
$ C_Compiler_Replace = "CC="
$ Thread_Live_Dangerously = "MT="
$ use_two_pot_malloc = "N"
@@ -481,6 +481,19 @@ $ IF (((f$length(file_2_find)+1) .eq. f$length(basename)) .and. -
$ file_2_find = dirname + basename
$!
$ found = F$SEARCH(file_2_find)
+$ IF (found .EQS. "" .AND. dots .GT. 2)
+$ THEN
+$! 17-DEC-1999 Improved to turn "[.foo.bar]baz.c_buz" into
+$! "[.foo.bar]baz_c.buz" to cover unzipped archives and put
+$! "[.foo.bar]baz.c_buz,baz_c.buz" into missing list if neither is found.
+$ basename[f$locate(".",basename),1] := _
+$ dot_ele = F$ELEMENT(dots - 1,"_",basename)
+$ basename = -
+ f$extract(0,f$length(basename)-(f$length(dot_ele)+1),basename) -
+ + "." + dot_ele
+$ found = F$SEARCH(dirname + basename)
+$ file_2_find = file_2_find + "," + basename
+$ ENDIF
$ IF (found .EQS. "")
$ THEN
$ WRITE MISSING file_2_find
@@ -702,7 +715,7 @@ $ TYPE SYS$INPUT:
%Config-E-VMS, ERROR:
Err, you do not appear to be running VMS!
- This package is intended to Configure the building of Perl for VMS.
+ This procedure is intended to Configure the building of Perl for VMS.
$ READ SYS$COMMAND/PROMPT="Continue anyway? [n] " ans
$ IF ans
@@ -826,7 +839,7 @@ $!
$TZSet:
$ echo ""
$ echo "Please tell me in hh:mm form what time offset from GMT/UTC in England"
-$ echo "you are. As an example Eastern (US) Standard Time is -5:00 offset, but"
+$ echo "you are. As an example Eastern (US) Standard Time is -5:00 offset, but"
$ echo "Eastern Daylight Time (summer) is -4:00 offset."
$ dflt = "0:00"
$ rp = "Enter the Time Zone offset: [''dflt'] "
@@ -870,8 +883,10 @@ $!
$ IF (F$GETSYI("HW_MODEL") .LT. 1024)
$ THEN
$ archname = "VMS_VAX"
+$ otherarch = "an Alpha"
$ ELSE
$ archname = "VMS_AXP"
+$ otherarch = "a VAX"
$ ENDIF
$ rp = "What is your architecture name? [''archname'] "
$ GOSUB myread
@@ -883,24 +898,22 @@ $ THEN
$ echo4 "I'll go with ''archname' anyway..."
$ ENDIF
$ ENDIF
-$ IF (archname.EQS."VMS_AXP")
+$ dflt = "n"
+$ rp = "Will you be sharing your PERL_ROOT with ''otherarch'? [''dflt'] "
+$ GOSUB myread
+$ if ans.NES.""
$ THEN
-$ dflt = "n"
-$ rp = "Are you sharing your PERL_ROOT with a VAX? [''dflt'] "
-$ GOSUB myread
-$ if ans.NES.""
-$ THEN
-$ ans = F$EDIT(ans,"COLLAPSE, UPCASE")
-$ ENDIF
-$ IF (ans.NES."Y")
+$ ans = F$EXTRACT(0,1,F$EDIT(ans,"COLLAPSE, UPCASE"))
+$ ENDIF
+$ IF (ans.NES."Y")
+$ THEN
+$ sharedperl = "N"
+$ ELSE
+$ sharedperl = "Y"
+$ IF (archname.EQS."VMS_AXP")
$ THEN
-$ sharedperl = "N"
-$ ELSE
-$ sharedperl = "Y"
$ macros = macros + """AXE=1"","
$ ENDIF
-$ ELSE
-$ sharedperl = "N"
$ ENDIF
$!
$!: is AFS running? !sfn
@@ -1597,7 +1610,7 @@ no easy means to double check it. The default value provided below
is most probably close to the reality but may not be valid from outside
your organization...
$ ENDIF
-$ dflt = "''cf_by@''myhostname'"+"''mydomain'"
+$ dflt = "''cf_by'@''myhostname'"+"''mydomain'"
$ rp = "What is your e-mail address? [''dflt'] "
$ GOSUB myread
$ IF ans .nes. ""
@@ -1685,16 +1698,16 @@ $ endif
$!
$!
$! Ask if they want to build with VMS_DEBUG perl
+$ echo ""
$ echo "Perl can be built to run under the VMS debugger."
$ echo "You should only select this option if you are debugging"
$ echo "perl itself. This can be a useful feature if you are "
$ echo "embedding perl in a program."
-$ echo ""
-$ dflt = "N"
+$ dflt = "n"
$ rp = "Build a VMS-DEBUG version of Perl? [''dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
-$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
+$ IF ans.eqs."" then ans = dflt
+$ IF F$EXTRACT(0, 1, F$EDIT(ans,"COLLAPSE,UPCASE")) .eqs. "Y"
$ THEN
$ use_vmsdebug_perl = "Y"
$ macros = macros + """__DEBUG__=1"","
@@ -1703,18 +1716,18 @@ $ use_vmsdebug_perl = "N"
$ ENDIF
$!
$! Ask if they want to build with MULTIPLICITY
+$ echo ""
$ echo "The perl interpreter engine can be built in a way that makes it
-$ echo "possible for a program that embeds perl into it (and yep, you can
+$ echo "possible for a program that embeds perl into it (and yes, you can
$ echo "do that--it's pretty keen) to have multiple perl interpreters active
$ echo "at once. There is some performance overhead, however, so you
$ echo "probably don't want to choose this unless you're going to be doing
$ echo "funky perl embedding."
-$ echo ""
$ dflt = "n"
$ rp = "Build with MULTIPLICITY? [''dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
-$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
+$ if ans.eqs."" then ans = dflt
+$ IF F$EXTRACT(0, 1, F$EDIT(ans,"COLLAPSE,UPCASE")) .eqs. "Y"
$ THEN
$ use_multiplicity="Y"
$ ELSE
@@ -1724,16 +1737,16 @@ $!
$! Ask if they want to build with 64-bit support
$ if (Archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
$ THEN
+$ echo ""
$ echo "This version of perl has experimental support for building with
$ echo "64 bit integers and 128 bit floating point variables. This gives
$ echo "a much larger range for perl's mathematical operations. (Note that
$ echo "does *not* enable 64-bit fileops at the moment, as Dec C doesn't
$ echo "do that yet)"
-$ echo ""
$ dflt = use_64bit
$ rp = "Build with 64 bits? [''dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
+$ if ans.eqs."" then ans = dflt
$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
$ THEN
$ use_64bit="Y"
@@ -1745,10 +1758,10 @@ $!
$! Ask about threads, if appropriate
$ if (Using_Dec_C.eqs."Yes")
$ THEN
+$ echo ""
$ echo "This version of Perl can be built with threads. While really nifty,
$ echo "they are a beta feature, and there is a speed penalty for perl
$ echo "programs if you build with threads *even if you don't use them*
-$ echo ""
$ dflt = "n"
$ rp = "Build with threads? [''dflt'] "
$ GOSUB myread
@@ -1768,7 +1781,6 @@ $ echo "all the threads in a program, even on a single-processor
$ echo "machine. Unfortunately this feature isn't safe on an
$ echo "unpatched 7.1 system. (Several OS patches were required when
$ echo "this procedure was written)
-$ echo ""
$ dflt = "n"
$ rp = "Enable multiple kernel threads and upcalls? [''dflt'] "
$ gosub myread
@@ -1796,7 +1808,6 @@ $ echo "This restriction does not apply to the %ENV hash or to implicit"
$ echo "logical name translation during parsing of file specifications;"
$ echo "these always use the normal sequence of access modes for logical"
$ echo "name translation."
-$ echo ""
$ dflt = "n"
$ rp = "Use secure logical name translation? [''dflt'] "
$ GOSUB myread
@@ -1812,12 +1823,11 @@ $ echo "default file types, however, you can configure Perl to try default"
$ echo "file types of nothing, .pl, and .com, in that order (e.g. typing"
$ echo """$ perl foo"" would cause Perl to look for foo., then foo.pl, and"
$ echo "finally foo.com)."
-$ echo ""
$ dflt = "n"
$ rp = "Always use default file types? [''dflt'] "
$ GOSUB myread
$ if ans.eqs."" then ans="''dflt'"
-$ d_alwdeftype = f$extract(0, 1, f$edit(ans,"TRIM,COMPRESS,UPCASE"))
+$ d_alwdeftype = f$extract(0, 1, f$edit(ans,"COLLAPSE,UPCASE"))
$!
$! Ask if they want to use perl's memory allocator
$ echo ""
@@ -1825,12 +1835,11 @@ $ echo "Perl has a built-in memory allocator that's tuned for perl's
$ echo "normal memory usage. It's oftentimes better than the standard
$ echo "system memory allocator. It also has the advantage of providing
$ echo "memory allocation statistics, if you choose to enable them.
-$ echo ""
$ dflt = "n"
$ rp = "Build with perl's memory allocator? [''dflt'] "
$ GOSUB myread
$ if ans.eqs."" then ans="''dflt'"
-$ mymalloc = f$extract(0, 1, f$edit(ans,"TRIM,COMPRESS,UPCASE"))
+$ mymalloc = f$extract(0, 1, f$edit(ans,"COLLAPSE,UPCASE"))
$ if mymalloc.eqs."Y"
$ THEN
$ if use_debugging_perl.eqs."Y"
@@ -1839,12 +1848,11 @@ $ echo ""
$ echo "Perl can keep statistics on memory usage if you choose to use
$ echo "them. This is useful for debugging, but does have some
$ echo "performance overhead.
-$ echo ""
$ dflt = "n"
$ rp = "Do you want the debugging memory allocator? [''dflt'] "
$ gosub myread
$ if ans.eqs."" then ans="''dflt'"
-$ use_debugmalloc = f$extract(0, 1, f$edit(ans, "TRIM,COMPRESS,UPCASE"))
+$ use_debugmalloc = f$extract(0, 1, f$edit(ans, "COLLAPSE,UPCASE"))
$ ENDIF
$ ! Check which memory allocator we want
$ echo ""
@@ -1855,7 +1863,6 @@ $ echo "larger allocations), and PACK_MALLOC (which is optimized to save
$ echo "memory for smaller allocations). They're all good, but if your
$ echo "usage tends towards larger chunks use TWO_POT, otherwise use
$ echo "PACK_MALLOC."
-$ echo ""
$ dflt = "DEFAULT"
$ rp = "Memory allocator (DEFAULT, TWO_POT, PACK_MALLOC) [''dflt'] "
$ GOSUB myread
@@ -1872,8 +1879,8 @@ $ echo "you might, for example, want to build GDBM_File instead of
$ echo "SDBM_File if you have the GDBM library built on your machine
$ echo "
$ echo "Which modules do you want to build into perl?"
-$! dflt = "Fcntl Errno IO Opcode Byteloader Devel::Peek Devel::DProf Data::Dumper attrs re VMS::Stdio VMS::DCLsym B SDBM_File"
-$ dflt = "Fcntl Errno IO Opcode Devel::Peek Devel::DProf Data::Dumper attrs re VMS::Stdio VMS::DCLsym B SDBM_File"
+$! dflt = "Fcntl Errno File::Glob IO Opcode Byteloader Devel::Peek Devel::DProf Data::Dumper attrs re VMS::Stdio VMS::DCLsym B SDBM_File"
+$ dflt = "Fcntl Errno File::Glob IO Opcode Devel::Peek Devel::DProf Data::Dumper attrs re VMS::Stdio VMS::DCLsym B SDBM_File"
$ if Using_Dec_C.eqs."Yes"
$ THEN
$ dflt = dflt + " POSIX"
@@ -2028,10 +2035,17 @@ $ SET DEFAULT [-.vms]
$ @subconfigure
$ SET DEFAULT 'dflt
$!
-$! Warn of dangerous logical names
+$! Warn of dangerous symbols or logical names
$!
-$Bad_logical: SUBROUTINE
-$ IF f$trnlnm(p1) .nes. ""
+$Bad_environment: SUBROUTINE
+$ Bad_env = ""
+$ IF p2 .eqs. "SYMBOL"
+$ THEN
+$ IF f$type('p1) .nes. "" THEN Bad_env := SYMBOL
+$ ELSE
+$ IF f$trnlnm(p1) .nes. "" THEN Bad_env := LOGICAL
+$ ENDIF
+$ IF Bad_env .eqs. "SYMBOL" .or. Bad_env .eqs. "LOGICAL"
$ THEN
$ IF f$search("config.msg") .nes. ""
$ THEN
@@ -2039,19 +2053,38 @@ $ OPEN/APPEND CONFIG config.msg
$ ELSE
$ OPEN/WRITE CONFIG config.msg
$ ENDIF
-$ WRITE CONFIG "Logical name ''p1' found in environment as " + f$trnlnm(p1)
-$ WRITE CONFIG " deassign before building ''package'"
+$ IF Bad_env .eqs. "SYMBOL"
+$ THEN
+$ WRITE CONFIG ""
+$ WRITE CONFIG "Symbol name ''p1' found in environment as " + &p1
+$ WRITE CONFIG " delete before building ''package' via:"
+$ WRITE CONFIG " $ DELETE/SYMBOL/GLOBAL ''p1'"
+$ IF f$locate("""",&p1) .ge. f$length(&p1)
+$ THEN
+$ WRITE CONFIG " after building, testing, and installing ''package'
+$ WRITE CONFIG " restore the symbol with:"
+$ WRITE CONFIG " $ ''p1' == """ + &p1 + """"
+$ ENDIF
+$ ENDIF
+$ IF Bad_env .eqs. "LOGICAL"
+$ THEN
+$ WRITE CONFIG ""
+$ WRITE CONFIG "Logical name ''p1' found in environment as " + f$trnlnm(p1)
+$ WRITE CONFIG " deassign before building ''package'"
+$ ENDIF
$ CLOSE CONFIG
+$ Bad_env = ""
$ ENDIF
$ EXIT
-$ ENDSUBROUTINE ! Bad_logical
+$ ENDSUBROUTINE ! Bad_environment
$ echo ""
-$ echo4 "%Config-I-VMS, Checking for dangerous pre extant logical names."
-$ CALL Bad_logical "TMP"
-$ CALL Bad_logical "LIB"
-$ CALL Bad_logical "T"
-$ CALL Bad_logical "FOO"
-$ CALL Bad_logical "EXT"
+$ echo4 "%Config-I-VMS, Checking for dangerous pre extant global symbols and logical names."
+$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "LIB"
+$ CALL Bad_environment "T"
+$ CALL Bad_environment "FOO"
+$ CALL Bad_environment "EXT"
+$ CALL Bad_environment "TEST" "SYMBOL"
$ IF f$search("config.msg") .eqs. "" THEN echo "OK."
$!
$! %Config-I-VMS, write perl_setup.com here
diff --git a/vms/subconfigure.com b/vms/subconfigure.com
index 93473dc8fd..1e0d003826 100644
--- a/vms/subconfigure.com
+++ b/vms/subconfigure.com
@@ -191,7 +191,7 @@ $ perl_d_mknod="undef"
$ perl_d_union_semun="undef"
$ perl_d_semctl_semun="undef"
$ perl_d_semctl_semid_ds="undef"
-$ IF (sharedperl.EQS."Y")
+$ IF (sharedperl.EQS."Y" .AND. F$GETSYI("HW_MODEL").GE.1024)
$ THEN
$ perl_obj_ext=".abj"
$ perl_so="axe"
@@ -3727,6 +3727,7 @@ $ WRITE CONFIG "#define USE_LONG_LONG"
$ WRITE CONFIG "#define USE_LONG_DOUBLE"
$ ENDIF
$ WRITE CONFIG "#define HAS_ENVGETENV"
+$ WRITE CONFIG "#define PERL_EXTERNAL_GLOB"
$ CLOSE CONFIG
$!
$! Now build the normal config.h
@@ -3793,7 +3794,7 @@ $ echo "Extracting Build_Ext.Com"
$ Create Sys$Disk:[-]Build_Ext.Com
$ Deck/Dollar="$EndOfTpl$"
$!++ Build_Ext.Com
-$! NOTE: This files is extracted as part of the VMS configuration process.
+$! NOTE: This file is extracted as part of the VMS configuration process.
$! Any changes made to it directly will be lost. If you need to make any
$! changes, please edit the template in [.vms]SubConfigure.Com instead.
$ def = F$Environment("Default")