CRLFgngngn.

p4raw-id: //depot/perl@11632

2 files changed, 2411 insertions, 2411 deletions

diff --git a/win32/Makefile b/win32/Makefile
index 663fa8a8c8..e2f082405a 100644
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -1,1140 +1,1140 @@
-#

-# Makefile to build perl on Windows NT using Microsoft NMAKE.

-# Supported compilers:

-#	Visual C++ 5.x (possibly other versions)

-#

-# This is set up to build a perl.exe that runs off a shared library

-# (perl57.dll).  Also makes individual DLLs for the XS extensions.

-#

-

-##

-## Make sure you read README.win32 *before* you mess with anything here!

-##

-

-##

-## Build configuration.  Edit the values below to suit your needs.

-##

-

-#

-# Set these to wherever you want "nmake install" to put your

-# newly built perl.

-#

-INST_DRV	= c:

-INST_TOP	= $(INST_DRV)\perl

-

-#

-# Comment this out if you DON'T want your perl installation to be versioned.

-# This means that the new installation will overwrite any files from the

-# old installation at the same INST_TOP location.  Leaving it enabled is

-# the safest route, as perl adds the extra version directory to all the

-# locations it installs files to.  If you disable it, an alternative

-# versioned installation can be obtained by setting INST_TOP above to a

-# path that includes an arbitrary version string.

-#

-#INST_VER = \5.7.2

-

-#

-# Comment this out if you DON'T want your perl installation to have

-# architecture specific components.  This means that architecture-

-# specific files will be installed along with the architecture-neutral

-# files.  Leaving it enabled is safer and more flexible, in case you

-# want to build multiple flavors of perl and install them together in

-# the same location.  Commenting it out gives you a simpler

-# installation that is easier to understand for beginners.

-#

-#INST_ARCH = \$(ARCHNAME)

-

-#

-# uncomment to enable multiple interpreters.  This is need for fork()

-# emulation.

-#

-USE_MULTI = define

-

-#

-# Beginnings of interpreter cloning/threads; still very incomplete.

-# This should be enabled to get the fork() emulation.  This needs

-# USE_MULTI as well.

-#

-USE_ITHREADS = define

-

-#

-# uncomment to enable the implicit "host" layer for all system calls

-# made by perl.  This needs USE_MULTI above.  This is also needed to

-# get fork().

-#

-USE_IMP_SYS = define

-

-#

-# uncomment to enable the experimental PerlIO I/O subsystem.

-USE_PERLIO	= define

-

-#

-# WARNING! This option is deprecated and will eventually go away (enable

-# USE_ITHREADS instead).

-#

-# uncomment to enable threads-capabilities.  This is incompatible with

-# USE_ITHREADS, and is only here for people who may have come to rely

-# on the experimental Thread support that was in 5.005.

-#

-#USE_5005THREADS	= define

-

-#

-# WARNING! This option is deprecated and will eventually go away (enable

-# USE_MULTI instead).

-#

-# uncomment next line if you want to use the PERL_OBJECT build option.

-# DO NOT ENABLE unless you have legacy code that relies on the C++

-# CPerlObj class that was available in 5.005.  This cannot be enabled

-# if you ask for USE_5005THREADS above.

-#

-#USE_OBJECT	= define

-

-#

-# uncomment one of the following lines if you are using either

-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)

-#

-#CCTYPE		= MSVC20

-#CCTYPE		= MSVC60

-

-#

-# uncomment next line if you want debug version of perl (big,slow)

-#

-#CFG		= Debug

-

-#

-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.

-# It has patches that fix known bugs in older versions of MSVCRT.DLL.

-# This currently requires VC 5.0 with Service Pack 3 or later.

-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/

-# and follow the directions in the package to install.

-#

-# Not recommended if you have VC 6.x and you're not running Windows 9x.

-#

-#USE_PERLCRT	= define

-

-#

-# uncomment to enable linking with setargv.obj under the Visual C

-# compiler. Setting this options enables perl to expand wildcards in

-# arguments, but it may be harder to use alternate methods like

-# File::DosGlob that are more powerful.  This option is supported only with

-# Visual C.

-#

-#USE_SETARGV	= define

-

-#

-# if you have the source for des_fcrypt(), uncomment this and make sure the

-# file exists (see README.win32).  File should be located in the same

-# directory as this file.

-#

-#CRYPT_SRC	= fcrypt.c

-

-#

-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a

-# library, uncomment this, and make sure the library exists (see README.win32)

-# Specify the full pathname of the library.

-#

-#CRYPT_LIB	= fcrypt.lib

-

-#

-# set this if you wish to use perl's malloc

-# WARNING: Turning this on/off WILL break binary compatibility with extensions

-# you may have compiled with/without it.  Be prepared to recompile all

-# extensions if you change the default.  Currently, this cannot be enabled

-# if you ask for USE_IMP_SYS above.

-#

-#PERL_MALLOC	= define

-

-#

-# set the install locations of the compiler include/libraries

-# Running VCVARS32.BAT is *required* when using Visual C.

-# Some versions of Visual C don't define MSVCDIR in the environment,

-# so you may have to set CCHOME explicitly (spaces in the path name should

-# not be quoted)

-#

-#CCHOME		= f:\msvc20

-CCHOME		= $(MSVCDIR)

-CCINCDIR	= $(CCHOME)\include

-CCLIBDIR	= $(CCHOME)\lib

-

-#

-# Additional compiler flags can be specified here.

-#

-

-#

-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support

-# for old symbols by default, at the expense of extreme pollution.  You most

-# probably just want to build modules that won't compile with

-#         perl Makefile.PL POLLUTE=1

-# instead of enabling this.  Please report such modules to the respective

-# authors.

-#

-#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE

-

-#

-# This should normally be disabled.  Enabling it will disable the File::Glob

-# implementation of CORE::glob.

-#

-#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB

-

-#

-# This should normally be disabled.  Enabling it causes perl to read scripts

-# in text mode (which is the 5.005 behavior) and will break ByteLoader.

-#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS

-

-#

-# specify semicolon-separated list of extra directories that modules will

-# look for libraries (spaces in path names need not be quoted)

-#

-EXTRALIBDIRS	=

-

-#

-# set this to your email address (perl will guess a value from

-# from your loginname and your hostname, which may not be right)

-#

-#EMAIL		=

-

-##

-## Build configuration ends.

-##

-

-##################### CHANGE THESE ONLY IF YOU MUST #####################

-

-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""

-D_CRYPT		= undef

-!ELSE

-D_CRYPT		= define

-CRYPT_FLAG	= -DHAVE_DES_FCRYPT

-!ENDIF

-

-!IF "$(USE_OBJECT)" == "define"

-PERL_MALLOC	= undef

-USE_5005THREADS	= undef

-USE_MULTI	= undef

-USE_IMP_SYS	= define

-!ENDIF

-

-!IF "$(PERL_MALLOC)" == ""

-PERL_MALLOC	= undef

-!ENDIF

-

-!IF "$(USE_5005THREADS)" == ""

-USE_5005THREADS	= undef

-!ENDIF

-

-!IF "$(USE_5005THREADS)" == "define"

-USE_ITHREADS	= undef

-!ENDIF

-

-!IF "$(USE_IMP_SYS)" == "define"

-PERL_MALLOC	= undef

-!ENDIF

-

-!IF "$(USE_MULTI)" == ""

-USE_MULTI	= undef

-!ENDIF

-

-!IF "$(USE_OBJECT)" == ""

-USE_OBJECT	= undef

-!ENDIF

-

-!IF "$(USE_ITHREADS)" == ""

-USE_ITHREADS	= undef

-!ENDIF

-

-!IF "$(USE_IMP_SYS)" == ""

-USE_IMP_SYS	= undef

-!ENDIF

-

-!IF "$(USE_PERLIO)" == ""

-USE_PERLIO	= undef

-!ENDIF

-

-!IF "$(USE_PERLCRT)" == ""

-USE_PERLCRT	= undef

-!ENDIF

-

-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"

-USE_MULTI	= define

-!ENDIF

-

-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"

-USE_MULTI	= define

-USE_5005THREADS	= undef

-!ENDIF

-

-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"

-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT

-!ENDIF

-

-!IF "$(USE_IMP_SYS)" != "undef"

-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS

-!ENDIF

-

-!IF "$(PROCESSOR_ARCHITECTURE)" == ""

-PROCESSOR_ARCHITECTURE	= x86

-!ENDIF

-

-!IF "$(USE_OBJECT)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object

-!ELSE

-!IF "$(USE_5005THREADS)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread

-!ELSE

-!IF "$(USE_MULTI)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi

-!ELSE

-!IF "$(USE_PERLIO)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio

-!ELSE

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)

-!ENDIF

-!ENDIF

-!ENDIF

-!ENDIF

-

-!IF "$(USE_PERLIO)" == "define"

-BUILDOPT	= $(BUILDOPT) -DUSE_PERLIO

-!ENDIF

-

-!IF "$(USE_ITHREADS)" == "define"

-ARCHNAME	= $(ARCHNAME)-thread

-!ENDIF

-

-# Visual Studio 98 specific

-!IF "$(CCTYPE)" == "MSVC60"

-

-# VC 6.0 can load the socket dll on demand.  Makes the test suite

-# run in about 10% less time.

-DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib

-!ENDIF

-

-ARCHDIR		= ..\lib\$(ARCHNAME)

-COREDIR		= ..\lib\CORE

-AUTODIR		= ..\lib\auto

-LIBDIR		= ..\lib

-EXTDIR		= ..\ext

-PODDIR		= ..\pod

-EXTUTILSDIR	= $(LIBDIR)\ExtUtils

-

-#

-INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin

-INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)

-INST_LIB	= $(INST_TOP)$(INST_VER)\lib

-INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)

-INST_COREDIR	= $(INST_ARCHLIB)\CORE

-INST_POD	= $(INST_LIB)\pod

-INST_HTML	= $(INST_TOP)$(INST_VER)\html

-

-#

-# Programs to compile, build .lib files and link

-#

-

-CC		= cl

-LINK32		= link

-LIB32		= $(LINK32) -lib

-RSC		= rc

-

-#

-# Options

-#

-

-INCLUDES	= -I$(COREDIR) -I.\include -I. -I..

-#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX

-DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)

-LOCDEFS		= -DPERLDLL -DPERL_CORE

-SUBSYS		= console

-CXX_FLAG	= -TP -GX

-

-!IF "$(USE_PERLCRT)" != "define"

-LIBC	= msvcrt.lib

-!ELSE

-LIBC	= PerlCRT.lib

-!ENDIF

-

-PERLEXE_RES	=

-PERLDLL_RES	=

-

-!IF  "$(CFG)" == "Debug"

-!  IF "$(CCTYPE)" == "MSVC20"

-OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING

-!  ELSE

-OPTIMIZE	= -Od -MD -Zi -DDEBUGGING

-!  ENDIF

-LINK_DBG	= -debug -pdb:none

-!ELSE

-# -O1 yields smaller code, which turns out to be faster than -O2

-#OPTIMIZE	= -O2 -MD -DNDEBUG

-OPTIMIZE	= -O1 -MD -DNDEBUG

-LINK_DBG	= -release

-!ENDIF

-

-!IF "$(USE_OBJECT)" == "define"

-OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)

-BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT

-!ENDIF

-

-!IF "$(USE_PERLCRT)" != "define"

-BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX

-!ENDIF

-

-LIBBASEFILES	= $(CRYPT_LIB) \

-		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \

-		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \

-		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \

-		version.lib odbc32.lib odbccp32.lib

-

-# we add LIBC here, since we may be using PerlCRT.dll

-LIBFILES	= $(LIBBASEFILES) $(LIBC)

-

-CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \

-		$(PCHFLAGS) $(OPTIMIZE)

-LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \

-		-libpath:"$(INST_COREDIR)" \

-		-machine:$(PROCESSOR_ARCHITECTURE)

-OBJOUT_FLAG	= -Fo

-EXEOUT_FLAG	= -Fe

-

-CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

-

-#################### do not edit below this line #######################

-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

-

-o = .obj

-

-#

-# Rules

-#

-

-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res

-

-.c$(o):

-	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

-

-.y.c:

-	$(NOOP)

-

-$(o).dll:

-	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \

-	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)

-

-.rc.res:

-	$(RSC) -i.. $<

-

-#

-# various targets

-

-# makedef.pl must be updated if this changes, and this should normally

-# only change when there is an incompatible revision of the public API.

-# XXX so why did we change it from perl56 to perl57?

-PERLIMPLIB	= ..\perl57.lib

-PERLDLL		= ..\perl57.dll

-

-MINIPERL	= ..\miniperl.exe

-MINIDIR		= .\mini

-PERLEXE		= ..\perl.exe

-WPERLEXE	= ..\wperl.exe

-GLOBEXE		= ..\perlglob.exe

-CONFIGPM	= ..\lib\Config.pm

-MINIMOD		= ..\lib\ExtUtils\Miniperl.pm

-X2P		= ..\x2p\a2p.exe

-

-# Nominate a target which causes extensions to be re-built

-# This used to be $(PERLEXE), but at worst it is the .dll that they depend

-# on and really only the interface - i.e. the .def file used to export symbols

-# from the .dll

-PERLDEP		= perldll.def

-

-PL2BAT		= bin\pl2bat.pl

-GLOBBAT		= bin\perlglob.bat

-

-UTILS		=			\

-		..\utils\h2ph		\

-		..\utils\splain		\

-		..\utils\dprofpp	\

-		..\utils\perlbug	\

-		..\utils\pl2pm 		\

-		..\utils\c2ph		\

-		..\utils\h2xs		\

-		..\utils\perldoc	\

-		..\utils\perlcc		\

-		..\utils\perlivp	\

-		..\utils\libnetcfg	\

-		..\pod\checkpods	\

-		..\pod\pod2html		\

-		..\pod\pod2latex	\

-		..\pod\pod2man		\

-		..\pod\pod2text		\

-		..\pod\pod2usage	\

-		..\pod\podchecker	\

-		..\pod\podselect	\

-		..\x2p\find2perl	\

-		..\x2p\s2p		\

-		..\lib\ExtUtils\xsubpp	\

-		bin\exetype.pl		\

-		bin\runperl.pl		\

-		bin\pl2bat.pl		\

-		bin\perlglob.pl		\

-		bin\search.pl

-

-MAKE		= nmake -nologo

-MAKE_BARE	= nmake

-

-CFGSH_TMPL	= config.vc

-CFGH_TMPL	= config_H.vc

-

-XCOPY		= xcopy /f /r /i /d

-RCOPY		= xcopy /f /r /i /e /d

-NOOP		= @echo

-NULL		=

-

-DEL		= del

-

-#

-# filenames given to xsubpp must have forward slashes (since it puts

-# full pathnames in #line strings)

-XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \

-		-C++ -prototypes

-

-MICROCORE_SRC	=		\

-		..\av.c		\

-		..\deb.c	\

-		..\doio.c	\

-		..\doop.c	\

-		..\dump.c	\

-		..\globals.c	\

-		..\gv.c		\

-		..\hv.c		\

-		..\locale.c	\

-		..\mg.c		\

-		..\numeric.c	\

-		..\op.c		\

-		..\perl.c	\

-		..\perlapi.c	\

-		..\perly.c	\

-		..\pp.c		\

-		..\pp_ctl.c	\

-		..\pp_hot.c	\

-		..\pp_pack.c	\

-		..\pp_sys.c	\

-		..\regcomp.c	\

-		..\regexec.c	\

-		..\run.c	\

-		..\scope.c	\

-		..\sv.c		\

-		..\taint.c	\

-		..\toke.c	\

-		..\universal.c	\

-		..\utf8.c	\

-		..\util.c	\

-		..\xsutils.c

-

-EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c

-

-!IF "$(PERL_MALLOC)" == "define"

-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c

-!ENDIF

-

-!IF "$(USE_OBJECT)" != "define"

-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c

-!ENDIF

-

-WIN32_SRC	=		\

-		.\win32.c	\

-		.\win32io.c	\

-		.\win32sck.c	\

-		.\win32thread.c

-

-!IF "$(CRYPT_SRC)" != ""

-WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)

-!ENDIF

-

-DLL_SRC		= $(DYNALOADER).c

-

-X2P_SRC		=		\

-		..\x2p\a2p.c	\

-		..\x2p\hash.c	\

-		..\x2p\str.c	\

-		..\x2p\util.c	\

-		..\x2p\walk.c

-

-CORE_NOCFG_H	=		\

-		..\av.h		\

-		..\cop.h	\

-		..\cv.h		\

-		..\dosish.h	\

-		..\embed.h	\

-		..\form.h	\

-		..\gv.h		\

-		..\handy.h	\

-		..\hv.h		\

-		..\iperlsys.h	\

-		..\mg.h		\

-		..\nostdio.h	\

-		..\op.h		\

-		..\opcode.h	\

-		..\perl.h	\

-		..\perlapi.h	\

-		..\perlsdio.h	\

-		..\perlsfio.h	\

-		..\perly.h	\

-		..\pp.h		\

-		..\proto.h	\

-		..\regexp.h	\

-		..\scope.h	\

-		..\sv.h		\

-		..\thread.h	\

-		..\unixish.h	\

-		..\utf8.h	\

-		..\util.h	\

-		..\warnings.h	\

-		..\XSUB.h	\

-		..\EXTERN.h	\

-		..\perlvars.h	\

-		..\intrpvar.h	\

-		..\thrdvar.h	\

-		.\include\dirent.h	\

-		.\include\netdb.h	\

-		.\include\sys\socket.h	\

-		.\win32.h

-

-CORE_H		= $(CORE_NOCFG_H) .\config.h

-

-MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)

-CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)

-WIN32_OBJ	= $(WIN32_SRC:.c=.obj)

-MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\

-		  $(MINIDIR)\miniperlmain$(o)	\

-		  $(MINIDIR)\perlio$(o)

-MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)

-MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)

-DLL_OBJ		= $(DLL_SRC:.c=.obj)

-X2P_OBJ		= $(X2P_SRC:.c=.obj)

-

-PERLDLL_OBJ	= $(CORE_OBJ)

-PERLEXE_OBJ	= perlmain$(o)

-

-PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

-#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

-

-!IF "$(USE_SETARGV)" != ""

-SETARGV_OBJ	= setargv$(o)

-!ENDIF

-

-DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader

-SOCKET		= $(EXTDIR)\Socket\Socket

-FCNTL		= $(EXTDIR)\Fcntl\Fcntl

-OPCODE		= $(EXTDIR)\Opcode\Opcode

-SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File

-IO		= $(EXTDIR)\IO\IO

-POSIX		= $(EXTDIR)\POSIX\POSIX

-ATTRS		= $(EXTDIR)\attrs\attrs

-THREAD		= $(EXTDIR)\Thread\Thread

-B		= $(EXTDIR)\B\B

-RE		= $(EXTDIR)\re\re

-DUMPER		= $(EXTDIR)\Data\Dumper\Dumper

-ERRNO		= $(EXTDIR)\Errno\Errno

-PEEK		= $(EXTDIR)\Devel\Peek\Peek

-BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader

-DPROF		= $(EXTDIR)\Devel\DProf\DProf

-GLOB		= $(EXTDIR)\File\Glob\Glob

-HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname

-STORABLE	= $(EXTDIR)\Storable\Storable

-FILTER		= $(EXTDIR)\Filter\Util\Call\Call

-ENCODE		= $(EXTDIR)\Encode\Encode

-MD5		= $(EXTDIR)\Digest\MD5\MD5

-PERLIOSCALAR	= $(EXTDIR)\PerlIO\Scalar\Scalar

-MIMEBASE64	= $(EXTDIR)\MIME\Base64\Base64

-TIMEHIRES	= $(EXTDIR)\Time\HiRes\HiRes

-CWD		= $(EXTDIR)\Cwd\Cwd

-LISTUTIL  	= $(EXTDIR)\List\Util\Util

-PERLIOVIA	= $(EXTDIR)\PerlIO\Via\Via

-XSTYPEMAP	= $(EXTDIR)\XS\Typemap\Typemap

-

-SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll

-FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll

-OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll

-SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll

-IO_DLL		= $(AUTODIR)\IO\IO.dll

-POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll

-ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll

-THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll

-B_DLL		= $(AUTODIR)\B\B.dll

-DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll

-PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll

-RE_DLL		= $(AUTODIR)\re\re.dll

-BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll

-DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll

-GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll

-HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll

-STORABLE_DLL	= $(AUTODIR)\Storable\Storable.dll

-FILTER_DLL	= $(AUTODIR)\Filter\Util\Call\Call.dll

-ENCODE_DLL	= $(AUTODIR)\Encode\Encode.dll

-MD5_DLL		= $(AUTODIR)\Digest\MD5\MD5.dll

-PERLIOSCALAR_DLL= $(AUTODIR)\PerlIO\Scalar\Scalar.dll

-MIMEBASE64_DLL	= $(AUTODIR)\MIME\Base64\Base64.dll

-TIMEHIRES_DLL	= $(AUTODIR)\Time\HiRes\HiRes.dll

-CWD_DLL		= $(AUTODIR)\Cwd\Cwd.dll

-LISTUTIL_DLL	= $(AUTODIR)\List\Util\Util.dll

-PERLIOVIA_DLL	= $(AUTODIR)\PerlIO\Via\Via.dll

-XSTYPEMAP_DLL	= $(AUTODIR)\XS\Typemap\Typemap.dll

-

-EXTENSION_C	= 		\

-		$(SOCKET).c	\

-		$(FCNTL).c	\

-		$(OPCODE).c	\

-		$(SDBM_FILE).c	\

-		$(IO).c		\

-		$(POSIX).c	\

-		$(ATTRS).c	\

-		$(THREAD).c	\

-		$(RE).c		\

-		$(DUMPER).c	\

-		$(PEEK).c	\

-		$(B).c		\

-		$(BYTELOADER).c	\

-		$(DPROF).c	\

-		$(GLOB).c	\

-		$(HOSTNAME).c	\

-		$(STORABLE).c	\

-		$(FILTER).c	\

-		$(ENCODE).c	\

-		$(MD5).c	\

-		$(PERLIOSCALAR).c	\

-		$(MIMEBASE64).c	\

-		$(TIMEHIRES).c	\

-		$(CWD).c	\

-		$(LISTUTIL).c	\

-		$(PERLIOVIA).c	\

-		$(XSTYPEMAP).c

-

-EXTENSION_DLL	= 		\

-		$(SOCKET_DLL)	\

-		$(FCNTL_DLL)	\

-		$(OPCODE_DLL)	\

-		$(SDBM_FILE_DLL)\

-		$(IO_DLL)	\

-		$(POSIX_DLL)	\

-		$(ATTRS_DLL)	\

-		$(DUMPER_DLL)	\

-		$(PEEK_DLL)	\

-		$(B_DLL)	\

-		$(RE_DLL)	\

-		$(THREAD_DLL)	\

-		$(BYTELOADER_DLL)	\

-		$(DPROF_DLL)	\

-		$(GLOB_DLL)	\

-		$(HOSTNAME_DLL)	\

-		$(STORABLE_DLL)	\

-		$(FILTER_DLL)   \

-		$(ENCODE_DLL)   \

-		$(MD5_DLL)	\

-		$(PERLIOSCALAR_DLL) \

-		$(MIMEBASE64_DLL) \

-		$(TIMEHIRES_DLL)  \

-		$(CWD_DLL)	\

-		$(LISTUTIL_DLL)	\

-		$(PERLIOVIA_DLL)	\

-		$(XSTYPEMAP_DLL)

-

-POD2HTML	= $(PODDIR)\pod2html

-POD2MAN		= $(PODDIR)\pod2man

-POD2LATEX	= $(PODDIR)\pod2latex

-POD2TEXT	= $(PODDIR)\pod2text

-

-CFG_VARS	=					\

-		"INST_DRV=$(INST_DRV)"			\

-		"INST_TOP=$(INST_TOP)"			\

-		"INST_VER=$(INST_VER)"			\

-		"INST_ARCH=$(INST_ARCH)"		\

-		"archname=$(ARCHNAME)"			\

-		"cc=$(CC)"				\

-		"ld=$(LINK32)"				\

-		"ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\

-		"cf_email=$(EMAIL)"	 		\

-		"d_crypt=$(D_CRYPT)"			\

-		"d_mymalloc=$(PERL_MALLOC)"		\

-		"libs=$(LIBFILES)"			\

-		"incpath=$(CCINCDIR:"=\")"		\

-		"libperl=$(PERLIMPLIB:..\=)"		\

-		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\

-		"libc=$(LIBC)"				\

-		"make=$(MAKE_BARE)"				\

-		"use5005threads=$(USE_5005THREADS)"	\

-		"useithreads=$(USE_ITHREADS)"		\

-		"usethreads=$(USE_5005THREADS)"		\

-		"usemultiplicity=$(USE_MULTI)"		\

-		"useperlio=$(USE_PERLIO)"		\

-		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\

-		"optimize=$(OPTIMIZE:"=\")"

-

-#

-# Top targets

-#

-

-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \

-	$(X2P) Extensions

-	@echo	Everything is up to date. '$(MAKE_BARE) test' to run test suite.

-

-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

-

-#------------------------------------------------------------

-

-$(GLOBEXE) : perlglob$(o)

-	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \

-	    perlglob$(o) setargv$(o)

-

-perlglob$(o)  : perlglob.c

-

-config.w32 : $(CFGSH_TMPL)

-	copy $(CFGSH_TMPL) config.w32

-

-.\config.h : $(CFGH_TMPL)

-	-del /f config.h

-	copy $(CFGH_TMPL) config.h

-

-..\config.sh : config.w32 $(MINIPERL) config_sh.PL

-	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh

-

-# this target is for when changes to the main config.sh happen

-# edit config.{b,v,g}c and make this target once for each supported

-# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)

-regen_config_h:

-	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh

-	cd ..

-	-del /f perl.exe

-	perl configpm

-	cd win32

-	-del /f $(CFGH_TMPL)

-	-mkdir $(COREDIR)

-	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"

-	rename config.h $(CFGH_TMPL)

-

-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl

-	cd ..

-	miniperl configpm

-	cd win32

-	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)

-	$(XCOPY) ..\*.h $(COREDIR)\*.*

-	$(XCOPY) *.h $(COREDIR)\*.*

-	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*

-	$(RCOPY) include $(COREDIR)\*.*

-	-$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"

-	if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)

-

-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)

-	$(LINK32) -subsystem:console -out:$@ @<<

-	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)

-<<

-

-$(MINIDIR) :

-	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

-

-$(MINICORE_OBJ) : $(CORE_NOCFG_H)

-	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c

-

-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)

-	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c

-

-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c

-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"

-perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h

-	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c

-!ENDIF

-

-# 1. we don't want to rebuild miniperl.exe when config.h changes

-# 2. we don't want to rebuild miniperl.exe with non-default config.h

-$(MINI_OBJ)	: $(CORE_NOCFG_H)

-

-$(WIN32_OBJ)	: $(CORE_H)

-$(CORE_OBJ)	: $(CORE_H)

-$(DLL_OBJ)	: $(CORE_H)

-$(X2P_OBJ)	: $(CORE_H)

-

-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl

-	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \

-	    CCTYPE=$(CCTYPE) > perldll.def

-

-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)

-	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<

-		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)

-<<

-	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

-

-$(MINIMOD) : $(MINIPERL) ..\minimod.pl

-	cd ..

-	miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

-	cd win32

-

-..\x2p\a2p$(o) : ..\x2p\a2p.c

-	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

-

-..\x2p\hash$(o) : ..\x2p\hash.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

-

-..\x2p\str$(o) : ..\x2p\str.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

-

-..\x2p\util$(o) : ..\x2p\util.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

-

-..\x2p\walk$(o) : ..\x2p\walk.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

-

-$(X2P) : $(MINIPERL) $(X2P_OBJ)

-	$(MINIPERL) ..\x2p\find2perl.PL

-	$(MINIPERL) ..\x2p\s2p.PL

-	$(LINK32) -subsystem:console -out:$@ @<<

-		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)

-<<

-

-perlmain.c : runperl.c

-	copy runperl.c perlmain.c

-

-perlmain$(o) : perlmain.c

-	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

-

-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)

-	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \

-	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)

-	copy $(PERLEXE) $(WPERLEXE)

-	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS

-	copy splittree.pl ..

-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

-

-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)

-	if not exist $(AUTODIR) mkdir $(AUTODIR)

-	cd $(EXTDIR)\$(*B)

-	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL

-	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL

-	cd ..\..\win32

-	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)

-	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)

-	cd $(EXTDIR)\$(*B)

-	$(XSUBPP) dl_win32.xs > $(*B).c

-	cd ..\..\win32

-

-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs

-	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

-

-#----------------------------------------------------------------------------------

-Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)

-	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)

-

-Extensions_clean: 

-	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean

-

-#----------------------------------------------------------------------------------

-

-doc: $(PERLEXE)

-	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \

-	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \

-	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

-

-utils: $(PERLEXE) $(X2P)

-	cd ..\utils

-	$(MAKE) PERL=$(MINIPERL)

-	cd ..\pod

-	copy ..\README.aix      .\perlaix.pod

-	copy ..\README.amiga    .\perlamiga.pod

-	copy ..\README.apollo   .\perlapollo.pod

-	copy ..\README.beos     .\perlbeos.pod

-	copy ..\README.bs2000   .\perlbs2000.pod

-	copy ..\README.ce	.\perlce.pod

-	copy ..\README.cygwin   .\perlcygwin.pod

-	copy ..\README.dgux     .\perldgux.pod

-	copy ..\README.dos      .\perldos.pod

-	copy ..\README.epoc     .\perlepoc.pod

-	copy ..\README.hurd     .\perlhurd.pod

-	copy ..\README.hpux     .\perlhpux.pod

-	copy ..\README.machten  .\perlmachten.pod

-	copy ..\README.macos    .\perlmacos.pod

-	copy ..\README.mint     .\perlmint.pod

-	copy ..\README.mpeix    .\perlmpeix.pod

-	copy ..\README.netware  .\perlnetware.pod

-	copy ..\README.os2      .\perlos2.pod

-	copy ..\README.os390    .\perlos390.pod

-	copy ..\README.plan9    .\perlplan9.pod

-	copy ..\README.qnx      .\perlqnx.pod

-	copy ..\README.solaris  .\perlsolaris.pod

-	copy ..\README.tru64    .\perltru64.pod

-	copy ..\README.uts      .\perluts.pod

-	copy ..\README.vmesa    .\perlvmesa.pod

-	copy ..\vms\perlvms.pod .\perlvms.pod

-	copy ..\README.vos      .\perlvos.pod

-	copy ..\README.win32    .\perlwin32.pod

-	$(MAKE) -f ..\win32\pod.mak converters

-	cd ..\lib

-	$(PERLEXE) lib_pm.PL

-	cd ..\win32

-	$(PERLEXE) $(PL2BAT) $(UTILS)

-

-distclean: clean

-	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \

-		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)

-	-del /f *.def *.map

-	-del /f $(EXTENSION_DLL)

-	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm

-	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs

-	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm

-	-del /f $(LIBDIR)\XSLoader.pm

-	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm

-	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm

-	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm

-	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm

-	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm

-	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm

-	-del /f $(LIBDIR)\File\Glob.pm

-	-del /f $(LIBDIR)\Storable.pm

-	-del /f $(LIBDIR)\Filter\Util\Call.pm

-	-del /f $(LIBDIR)\Digest\MD5.pm

-	-del /f $(LIBDIR)\PerlIO\Scalar.pm

-	-del /f $(LIBDIR)\PerlIO\Via.pm

-	-del /f $(LIBDIR)\MIME\Base64.pm

-	-del /f $(LIBDIR)\MIME\QuotedPrint.pm

-	-del /f $(LIBDIR)\List\Util.pm

-	-del /f $(LIBDIR)\Scalar\Util.pm

-	-del /f $(LIBDIR)\Time\HiRes.pm

-	-del /f $(LIBDIR)\XS\Typemap.pm

-	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO

-	-rmdir /s $(LIBDIR)\IO

-	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread

-	-rmdir /s $(LIBDIR)\Thread

-	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B

-	-rmdir /s $(LIBDIR)\B

-	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data

-	-rmdir /s $(LIBDIR)\Data

-	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util

-	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest

-	-rmdir /s $(LIBDIR)\Digest

-	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME

-	-rmdir /s $(LIBDIR)\MIME

-	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List

-	-rmdir /s $(LIBDIR)\List

-	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar

-	-rmdir /s $(LIBDIR)\Scalar

-	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS

-	-rmdir /s $(LIBDIR)\XS

-	cd $(PODDIR)

-	-del /f *.html *.bat checkpods \

-	    perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \

-	    perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \

-	    perldos.pod perlepoc.pod perlhurd.pod \

-	    perlhpux.pod perlmachten.pod \

-	    perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \

-	    perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \

-	    perlsolaris.pod perltru64.pod perluts.pod \

-	    perlvmesa.pod perlvms.pod perlvos.pod \

-	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \

-	    podchecker podselect

-	cd ..\utils

-	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp

-	-del /f *.bat

-	cd ..\win32

-	cd ..\x2p

-	-del /f find2perl s2p

-	-del /f *.bat

-	cd ..\win32

-	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new

-	-del /f $(CONFIGPM)

-	-del /f bin\*.bat

-	cd $(EXTDIR)

-	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib

-	cd ..\win32

-	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)

-	-rmdir /s $(AUTODIR)

-	-if exist $(COREDIR) rmdir /s /q $(COREDIR)

-	-rmdir /s $(COREDIR)

-

-install : all installbare installhtml

-

-installbare : utils

-	$(PERLEXE) ..\installperl

-	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*

-	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*

-	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

-

-installhtml : doc

-	$(RCOPY) html\*.* $(INST_HTML)\*.*

-

-inst_lib : $(CONFIGPM)

-	copy splittree.pl ..

-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

-	$(RCOPY) ..\lib $(INST_LIB)\*.*

-

-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils

-	$(XCOPY) $(MINIPERL) ..\t\perl.exe

-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

-	attrib -r ..\t\*.*

-	copy test ..\t

-	cd ..\t

-	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

-	cd ..\win32

-

-test-prep : all utils

-	$(XCOPY) $(PERLEXE) ..\t\$(NULL)

-	$(XCOPY) $(PERLDLL) ..\t\$(NULL)

-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

-

-test : test-prep

-	cd ..\t

-	$(PERLEXE) -I..\lib harness

-	cd ..\win32

-

-test-notty : test-prep

-	set PERL_SKIP_TTY_TEST=1

-	cd ..\t

-	$(PERLEXE) -I..\lib harness

-	cd ..\win32

-

-test-wide : test-prep

-	set HARNESS_PERL_SWITCHES=-C

-	cd ..\t

-	$(PERLEXE) -I..\lib harness

-	cd ..\win32

-

-test-wide-notty : test-prep

-	set PERL_SKIP_TTY_TEST=1

-	set HARNESS_PERL_SWITCHES=-C

-	cd ..\t

-	$(PERLEXE) -I..\lib harness

-	cd ..\win32

-

-clean : Extensions_clean

-	-@$(DEL) miniperlmain$(o)

-	-@$(DEL) $(MINIPERL)

-	-@$(DEL) perlglob$(o)

-	-@$(DEL) perlmain$(o)

-	-@$(DEL) config.w32

-	-@$(DEL) config.h

-	-@$(DEL) $(GLOBEXE)

-	-@$(DEL) $(PERLEXE)

-	-@$(DEL) $(WPERLEXE)

-	-@$(DEL) $(PERLDLL)

-	-@$(DEL) $(CORE_OBJ)

-	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)

-	-rmdir /s $(MINIDIR)

-	-@$(DEL) $(WIN32_OBJ)

-	-@$(DEL) $(DLL_OBJ)

-	-@$(DEL) $(X2P_OBJ)

-	-@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res

-	-@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat

-	-@$(DEL) ..\x2p\*.exe ..\x2p\*.bat

-	-@$(DEL) *.ilk

-	-@$(DEL) *.pdb

-

-# Handy way to run perlbug -ok without having to install and run the

-# installed perlbug. We don't re-run the tests here - we trust the user.

-# Please *don't* use this unless all tests pass.

-# If you want to report test failures, use "nmake nok" instead.

-ok: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

-

-okfile: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

-

-nok: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"

-

-nokfile: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok

+#
+# Makefile to build perl on Windows NT using Microsoft NMAKE.
+# Supported compilers:
+#	Visual C++ 5.x (possibly other versions)
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl57.dll).  Also makes individual DLLs for the XS extensions.
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration.  Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "nmake install" to put your
+# newly built perl.
+#
+INST_DRV	= c:
+INST_TOP	= $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location.  Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to.  If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+#INST_VER = \5.7.2
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components.  This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files.  Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location.  Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+#INST_ARCH = \$(ARCHNAME)
+
+#
+# uncomment to enable multiple interpreters.  This is need for fork()
+# emulation.
+#
+USE_MULTI = define
+
+#
+# Beginnings of interpreter cloning/threads; still very incomplete.
+# This should be enabled to get the fork() emulation.  This needs
+# USE_MULTI as well.
+#
+USE_ITHREADS = define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl.  This needs USE_MULTI above.  This is also needed to
+# get fork().
+#
+USE_IMP_SYS = define
+
+#
+# uncomment to enable the experimental PerlIO I/O subsystem.
+USE_PERLIO	= define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_ITHREADS instead).
+#
+# uncomment to enable threads-capabilities.  This is incompatible with
+# USE_ITHREADS, and is only here for people who may have come to rely
+# on the experimental Thread support that was in 5.005.
+#
+#USE_5005THREADS	= define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_MULTI instead).
+#
+# uncomment next line if you want to use the PERL_OBJECT build option.
+# DO NOT ENABLE unless you have legacy code that relies on the C++
+# CPerlObj class that was available in 5.005.  This cannot be enabled
+# if you ask for USE_5005THREADS above.
+#
+#USE_OBJECT	= define
+
+#
+# uncomment one of the following lines if you are using either
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
+#
+#CCTYPE		= MSVC20
+#CCTYPE		= MSVC60
+
+#
+# uncomment next line if you want debug version of perl (big,slow)
+#
+#CFG		= Debug
+
+#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
+#USE_PERLCRT	= define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful.  This option is supported only with
+# Visual C.
+#
+#USE_SETARGV	= define
+
+#
+# if you have the source for des_fcrypt(), uncomment this and make sure the
+# file exists (see README.win32).  File should be located in the same
+# directory as this file.
+#
+#CRYPT_SRC	= fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+# Specify the full pathname of the library.
+#
+#CRYPT_LIB	= fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it.  Be prepared to recompile all
+# extensions if you change the default.  Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC	= define
+
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+#CCHOME		= f:\msvc20
+CCHOME		= $(MSVCDIR)
+CCINCDIR	= $(CCHOME)\include
+CCLIBDIR	= $(CCHOME)\lib
+
+#
+# Additional compiler flags can be specified here.
+#
+
+#
+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution.  You most
+# probably just want to build modules that won't compile with
+#         perl Makefile.PL POLLUTE=1
+# instead of enabling this.  Please report such modules to the respective
+# authors.
+#
+#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE
+
+#
+# This should normally be disabled.  Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled.  Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS	=
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL		=
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT		= undef
+!ELSE
+D_CRYPT		= define
+CRYPT_FLAG	= -DHAVE_DES_FCRYPT
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+PERL_MALLOC	= undef
+USE_5005THREADS	= undef
+USE_MULTI	= undef
+USE_IMP_SYS	= define
+!ENDIF
+
+!IF "$(PERL_MALLOC)" == ""
+PERL_MALLOC	= undef
+!ENDIF
+
+!IF "$(USE_5005THREADS)" == ""
+USE_5005THREADS	= undef
+!ENDIF
+
+!IF "$(USE_5005THREADS)" == "define"
+USE_ITHREADS	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC	= undef
+!ENDIF
+
+!IF "$(USE_MULTI)" == ""
+USE_MULTI	= undef
+!ENDIF
+
+!IF "$(USE_OBJECT)" == ""
+USE_OBJECT	= undef
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == ""
+USE_ITHREADS	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == ""
+USE_IMP_SYS	= undef
+!ENDIF
+
+!IF "$(USE_PERLIO)" == ""
+USE_PERLIO	= undef
+!ENDIF
+
+!IF "$(USE_PERLCRT)" == ""
+USE_PERLCRT	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+USE_MULTI	= define
+!ENDIF
+
+!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+USE_MULTI	= define
+USE_5005THREADS	= undef
+!ENDIF
+
+!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
+!ENDIF
+
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""
+PROCESSOR_ARCHITECTURE	= x86
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+!ELSE
+!IF "$(USE_5005THREADS)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+!ELSE
+!IF "$(USE_MULTI)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+!ELSE
+!IF "$(USE_PERLIO)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+!ELSE
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
+!ENDIF
+!ENDIF
+!ENDIF
+!ENDIF
+
+!IF "$(USE_PERLIO)" == "define"
+BUILDOPT	= $(BUILDOPT) -DUSE_PERLIO
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == "define"
+ARCHNAME	= $(ARCHNAME)-thread
+!ENDIF
+
+# Visual Studio 98 specific
+!IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand.  Makes the test suite
+# run in about 10% less time.
+DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+!ENDIF
+
+ARCHDIR		= ..\lib\$(ARCHNAME)
+COREDIR		= ..\lib\CORE
+AUTODIR		= ..\lib\auto
+LIBDIR		= ..\lib
+EXTDIR		= ..\ext
+PODDIR		= ..\pod
+EXTUTILSDIR	= $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB	= $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
+INST_COREDIR	= $(INST_ARCHLIB)\CORE
+INST_POD	= $(INST_LIB)\pod
+INST_HTML	= $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+CC		= cl
+LINK32		= link
+LIB32		= $(LINK32) -lib
+RSC		= rc
+
+#
+# Options
+#
+
+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX
+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -TP -GX
+
+!IF "$(USE_PERLCRT)" != "define"
+LIBC	= msvcrt.lib
+!ELSE
+LIBC	= PerlCRT.lib
+!ENDIF
+
+PERLEXE_RES	=
+PERLDLL_RES	=
+
+!IF  "$(CFG)" == "Debug"
+!  IF "$(CCTYPE)" == "MSVC20"
+OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
+!  ELSE
+OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
+!  ENDIF
+LINK_DBG	= -debug -pdb:none
+!ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2
+#OPTIMIZE	= -O2 -MD -DNDEBUG
+OPTIMIZE	= -O1 -MD -DNDEBUG
+LINK_DBG	= -release
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)
+BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT
+!ENDIF
+
+!IF "$(USE_PERLCRT)" != "define"
+BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX
+!ENDIF
+
+LIBBASEFILES	= $(CRYPT_LIB) \
+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+		version.lib odbc32.lib odbccp32.lib
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES	= $(LIBBASEFILES) $(LIBC)
+
+CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+		$(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
+		-libpath:"$(INST_COREDIR)" \
+		-machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG	= -Fo
+EXEOUT_FLAG	= -Fe
+
+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o = .obj
+
+#
+# Rules
+#
+
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
+
+.c$(o):
+	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+	$(NOOP)
+
+$(o).dll:
+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+
+.rc.res:
+	$(RSC) -i.. $<
+
+#
+# various targets
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+# XXX so why did we change it from perl56 to perl57?
+PERLIMPLIB	= ..\perl57.lib
+PERLDLL		= ..\perl57.dll
+
+MINIPERL	= ..\miniperl.exe
+MINIDIR		= .\mini
+PERLEXE		= ..\perl.exe
+WPERLEXE	= ..\wperl.exe
+GLOBEXE		= ..\perlglob.exe
+CONFIGPM	= ..\lib\Config.pm
+MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
+X2P		= ..\x2p\a2p.exe
+
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP		= perldll.def
+
+PL2BAT		= bin\pl2bat.pl
+GLOBBAT		= bin\perlglob.bat
+
+UTILS		=			\
+		..\utils\h2ph		\
+		..\utils\splain		\
+		..\utils\dprofpp	\
+		..\utils\perlbug	\
+		..\utils\pl2pm 		\
+		..\utils\c2ph		\
+		..\utils\h2xs		\
+		..\utils\perldoc	\
+		..\utils\perlcc		\
+		..\utils\perlivp	\
+		..\utils\libnetcfg	\
+		..\pod\checkpods	\
+		..\pod\pod2html		\
+		..\pod\pod2latex	\
+		..\pod\pod2man		\
+		..\pod\pod2text		\
+		..\pod\pod2usage	\
+		..\pod\podchecker	\
+		..\pod\podselect	\
+		..\x2p\find2perl	\
+		..\x2p\s2p		\
+		..\lib\ExtUtils\xsubpp	\
+		bin\exetype.pl		\
+		bin\runperl.pl		\
+		bin\pl2bat.pl		\
+		bin\perlglob.pl		\
+		bin\search.pl
+
+MAKE		= nmake -nologo
+MAKE_BARE	= nmake
+
+CFGSH_TMPL	= config.vc
+CFGH_TMPL	= config_H.vc
+
+XCOPY		= xcopy /f /r /i /d
+RCOPY		= xcopy /f /r /i /e /d
+NOOP		= @echo
+NULL		=
+
+DEL		= del
+
+#
+# filenames given to xsubpp must have forward slashes (since it puts
+# full pathnames in #line strings)
+XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+		-C++ -prototypes
+
+MICROCORE_SRC	=		\
+		..\av.c		\
+		..\deb.c	\
+		..\doio.c	\
+		..\doop.c	\
+		..\dump.c	\
+		..\globals.c	\
+		..\gv.c		\
+		..\hv.c		\
+		..\locale.c	\
+		..\mg.c		\
+		..\numeric.c	\
+		..\op.c		\
+		..\perl.c	\
+		..\perlapi.c	\
+		..\perly.c	\
+		..\pp.c		\
+		..\pp_ctl.c	\
+		..\pp_hot.c	\
+		..\pp_pack.c	\
+		..\pp_sys.c	\
+		..\regcomp.c	\
+		..\regexec.c	\
+		..\run.c	\
+		..\scope.c	\
+		..\sv.c		\
+		..\taint.c	\
+		..\toke.c	\
+		..\universal.c	\
+		..\utf8.c	\
+		..\util.c	\
+		..\xsutils.c
+
+EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c
+
+!IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
+!ENDIF
+
+!IF "$(USE_OBJECT)" != "define"
+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
+!ENDIF
+
+WIN32_SRC	=		\
+		.\win32.c	\
+		.\win32io.c	\
+		.\win32sck.c	\
+		.\win32thread.c
+
+!IF "$(CRYPT_SRC)" != ""
+WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
+!ENDIF
+
+DLL_SRC		= $(DYNALOADER).c
+
+X2P_SRC		=		\
+		..\x2p\a2p.c	\
+		..\x2p\hash.c	\
+		..\x2p\str.c	\
+		..\x2p\util.c	\
+		..\x2p\walk.c
+
+CORE_NOCFG_H	=		\
+		..\av.h		\
+		..\cop.h	\
+		..\cv.h		\
+		..\dosish.h	\
+		..\embed.h	\
+		..\form.h	\
+		..\gv.h		\
+		..\handy.h	\
+		..\hv.h		\
+		..\iperlsys.h	\
+		..\mg.h		\
+		..\nostdio.h	\
+		..\op.h		\
+		..\opcode.h	\
+		..\perl.h	\
+		..\perlapi.h	\
+		..\perlsdio.h	\
+		..\perlsfio.h	\
+		..\perly.h	\
+		..\pp.h		\
+		..\proto.h	\
+		..\regexp.h	\
+		..\scope.h	\
+		..\sv.h		\
+		..\thread.h	\
+		..\unixish.h	\
+		..\utf8.h	\
+		..\util.h	\
+		..\warnings.h	\
+		..\XSUB.h	\
+		..\EXTERN.h	\
+		..\perlvars.h	\
+		..\intrpvar.h	\
+		..\thrdvar.h	\
+		.\include\dirent.h	\
+		.\include\netdb.h	\
+		.\include\sys\socket.h	\
+		.\win32.h
+
+CORE_H		= $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
+WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
+MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
+		  $(MINIDIR)\miniperlmain$(o)	\
+		  $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ		= $(DLL_SRC:.c=.obj)
+X2P_OBJ		= $(X2P_SRC:.c=.obj)
+
+PERLDLL_OBJ	= $(CORE_OBJ)
+PERLEXE_OBJ	= perlmain$(o)
+
+PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ	= setargv$(o)
+!ENDIF
+
+DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
+SOCKET		= $(EXTDIR)\Socket\Socket
+FCNTL		= $(EXTDIR)\Fcntl\Fcntl
+OPCODE		= $(EXTDIR)\Opcode\Opcode
+SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File
+IO		= $(EXTDIR)\IO\IO
+POSIX		= $(EXTDIR)\POSIX\POSIX
+ATTRS		= $(EXTDIR)\attrs\attrs
+THREAD		= $(EXTDIR)\Thread\Thread
+B		= $(EXTDIR)\B\B
+RE		= $(EXTDIR)\re\re
+DUMPER		= $(EXTDIR)\Data\Dumper\Dumper
+ERRNO		= $(EXTDIR)\Errno\Errno
+PEEK		= $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader
+DPROF		= $(EXTDIR)\Devel\DProf\DProf
+GLOB		= $(EXTDIR)\File\Glob\Glob
+HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname
+STORABLE	= $(EXTDIR)\Storable\Storable
+FILTER		= $(EXTDIR)\Filter\Util\Call\Call
+ENCODE		= $(EXTDIR)\Encode\Encode
+MD5		= $(EXTDIR)\Digest\MD5\MD5
+PERLIOSCALAR	= $(EXTDIR)\PerlIO\Scalar\Scalar
+MIMEBASE64	= $(EXTDIR)\MIME\Base64\Base64
+TIMEHIRES	= $(EXTDIR)\Time\HiRes\HiRes
+CWD		= $(EXTDIR)\Cwd\Cwd
+LISTUTIL  	= $(EXTDIR)\List\Util\Util
+PERLIOVIA	= $(EXTDIR)\PerlIO\Via\Via
+XSTYPEMAP	= $(EXTDIR)\XS\Typemap\Typemap
+
+SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll
+FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll
+OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll
+SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll
+IO_DLL		= $(AUTODIR)\IO\IO.dll
+POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll
+ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll
+THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll
+B_DLL		= $(AUTODIR)\B\B.dll
+DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL		= $(AUTODIR)\re\re.dll
+BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll
+GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll
+HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll
+STORABLE_DLL	= $(AUTODIR)\Storable\Storable.dll
+FILTER_DLL	= $(AUTODIR)\Filter\Util\Call\Call.dll
+ENCODE_DLL	= $(AUTODIR)\Encode\Encode.dll
+MD5_DLL		= $(AUTODIR)\Digest\MD5\MD5.dll
+PERLIOSCALAR_DLL= $(AUTODIR)\PerlIO\Scalar\Scalar.dll
+MIMEBASE64_DLL	= $(AUTODIR)\MIME\Base64\Base64.dll
+TIMEHIRES_DLL	= $(AUTODIR)\Time\HiRes\HiRes.dll
+CWD_DLL		= $(AUTODIR)\Cwd\Cwd.dll
+LISTUTIL_DLL	= $(AUTODIR)\List\Util\Util.dll
+PERLIOVIA_DLL	= $(AUTODIR)\PerlIO\Via\Via.dll
+XSTYPEMAP_DLL	= $(AUTODIR)\XS\Typemap\Typemap.dll
+
+EXTENSION_C	= 		\
+		$(SOCKET).c	\
+		$(FCNTL).c	\
+		$(OPCODE).c	\
+		$(SDBM_FILE).c	\
+		$(IO).c		\
+		$(POSIX).c	\
+		$(ATTRS).c	\
+		$(THREAD).c	\
+		$(RE).c		\
+		$(DUMPER).c	\
+		$(PEEK).c	\
+		$(B).c		\
+		$(BYTELOADER).c	\
+		$(DPROF).c	\
+		$(GLOB).c	\
+		$(HOSTNAME).c	\
+		$(STORABLE).c	\
+		$(FILTER).c	\
+		$(ENCODE).c	\
+		$(MD5).c	\
+		$(PERLIOSCALAR).c	\
+		$(MIMEBASE64).c	\
+		$(TIMEHIRES).c	\
+		$(CWD).c	\
+		$(LISTUTIL).c	\
+		$(PERLIOVIA).c	\
+		$(XSTYPEMAP).c
+
+EXTENSION_DLL	= 		\
+		$(SOCKET_DLL)	\
+		$(FCNTL_DLL)	\
+		$(OPCODE_DLL)	\
+		$(SDBM_FILE_DLL)\
+		$(IO_DLL)	\
+		$(POSIX_DLL)	\
+		$(ATTRS_DLL)	\
+		$(DUMPER_DLL)	\
+		$(PEEK_DLL)	\
+		$(B_DLL)	\
+		$(RE_DLL)	\
+		$(THREAD_DLL)	\
+		$(BYTELOADER_DLL)	\
+		$(DPROF_DLL)	\
+		$(GLOB_DLL)	\
+		$(HOSTNAME_DLL)	\
+		$(STORABLE_DLL)	\
+		$(FILTER_DLL)   \
+		$(ENCODE_DLL)   \
+		$(MD5_DLL)	\
+		$(PERLIOSCALAR_DLL) \
+		$(MIMEBASE64_DLL) \
+		$(TIMEHIRES_DLL)  \
+		$(CWD_DLL)	\
+		$(LISTUTIL_DLL)	\
+		$(PERLIOVIA_DLL)	\
+		$(XSTYPEMAP_DLL)
+
+POD2HTML	= $(PODDIR)\pod2html
+POD2MAN		= $(PODDIR)\pod2man
+POD2LATEX	= $(PODDIR)\pod2latex
+POD2TEXT	= $(PODDIR)\pod2text
+
+CFG_VARS	=					\
+		"INST_DRV=$(INST_DRV)"			\
+		"INST_TOP=$(INST_TOP)"			\
+		"INST_VER=$(INST_VER)"			\
+		"INST_ARCH=$(INST_ARCH)"		\
+		"archname=$(ARCHNAME)"			\
+		"cc=$(CC)"				\
+		"ld=$(LINK32)"				\
+		"ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
+		"cf_email=$(EMAIL)"	 		\
+		"d_crypt=$(D_CRYPT)"			\
+		"d_mymalloc=$(PERL_MALLOC)"		\
+		"libs=$(LIBFILES)"			\
+		"incpath=$(CCINCDIR:"=\")"		\
+		"libperl=$(PERLIMPLIB:..\=)"		\
+		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
+		"libc=$(LIBC)"				\
+		"make=$(MAKE_BARE)"				\
+		"use5005threads=$(USE_5005THREADS)"	\
+		"useithreads=$(USE_ITHREADS)"		\
+		"usethreads=$(USE_5005THREADS)"		\
+		"usemultiplicity=$(USE_MULTI)"		\
+		"useperlio=$(USE_PERLIO)"		\
+		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
+		"optimize=$(OPTIMIZE:"=\")"
+
+#
+# Top targets
+#
+
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+	$(X2P) Extensions
+	@echo	Everything is up to date. '$(MAKE_BARE) test' to run test suite.
+
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+
+#------------------------------------------------------------
+
+$(GLOBEXE) : perlglob$(o)
+	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+	    perlglob$(o) setargv$(o)
+
+perlglob$(o)  : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+	copy $(CFGSH_TMPL) config.w32
+
+.\config.h : $(CFGH_TMPL)
+	-del /f config.h
+	copy $(CFGH_TMPL) config.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL
+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+	cd ..
+	-del /f perl.exe
+	perl configpm
+	cd win32
+	-del /f $(CFGH_TMPL)
+	-mkdir $(COREDIR)
+	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+	rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
+	cd ..
+	miniperl configpm
+	cd win32
+	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(XCOPY) *.h $(COREDIR)\*.*
+	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+	$(RCOPY) include $(COREDIR)\*.*
+	-$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+	if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
+	$(LINK32) -subsystem:console -out:$@ @<<
+	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
+<<
+
+$(MINIDIR) :
+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+!ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ)	: $(CORE_NOCFG_H)
+
+$(WIN32_OBJ)	: $(CORE_H)
+$(CORE_OBJ)	: $(CORE_H)
+$(DLL_OBJ)	: $(CORE_H)
+$(X2P_OBJ)	: $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
+	    CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
+		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
+<<
+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl
+	cd ..
+	miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+	cd win32
+
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+	$(MINIPERL) ..\x2p\find2perl.PL
+	$(MINIPERL) ..\x2p\s2p.PL
+	$(LINK32) -subsystem:console -out:$@ @<<
+		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
+<<
+
+perlmain.c : runperl.c
+	copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
+	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+	copy $(PERLEXE) $(WPERLEXE)
+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+	copy splittree.pl ..
+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
+	if not exist $(AUTODIR) mkdir $(AUTODIR)
+	cd $(EXTDIR)\$(*B)
+	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
+	cd ..\..\win32
+	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
+	cd $(EXTDIR)\$(*B)
+	$(XSUBPP) dl_win32.xs > $(*B).c
+	cd ..\..\win32
+
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+
+#----------------------------------------------------------------------------------
+Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
+	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+
+Extensions_clean: 
+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+
+#----------------------------------------------------------------------------------
+
+doc: $(PERLEXE)
+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
+	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+
+utils: $(PERLEXE) $(X2P)
+	cd ..\utils
+	$(MAKE) PERL=$(MINIPERL)
+	cd ..\pod
+	copy ..\README.aix      .\perlaix.pod
+	copy ..\README.amiga    .\perlamiga.pod
+	copy ..\README.apollo   .\perlapollo.pod
+	copy ..\README.beos     .\perlbeos.pod
+	copy ..\README.bs2000   .\perlbs2000.pod
+	copy ..\README.ce	.\perlce.pod
+	copy ..\README.cygwin   .\perlcygwin.pod
+	copy ..\README.dgux     .\perldgux.pod
+	copy ..\README.dos      .\perldos.pod
+	copy ..\README.epoc     .\perlepoc.pod
+	copy ..\README.hurd     .\perlhurd.pod
+	copy ..\README.hpux     .\perlhpux.pod
+	copy ..\README.machten  .\perlmachten.pod
+	copy ..\README.macos    .\perlmacos.pod
+	copy ..\README.mint     .\perlmint.pod
+	copy ..\README.mpeix    .\perlmpeix.pod
+	copy ..\README.netware  .\perlnetware.pod
+	copy ..\README.os2      .\perlos2.pod
+	copy ..\README.os390    .\perlos390.pod
+	copy ..\README.plan9    .\perlplan9.pod
+	copy ..\README.qnx      .\perlqnx.pod
+	copy ..\README.solaris  .\perlsolaris.pod
+	copy ..\README.tru64    .\perltru64.pod
+	copy ..\README.uts      .\perluts.pod
+	copy ..\README.vmesa    .\perlvmesa.pod
+	copy ..\vms\perlvms.pod .\perlvms.pod
+	copy ..\README.vos      .\perlvos.pod
+	copy ..\README.win32    .\perlwin32.pod
+	$(MAKE) -f ..\win32\pod.mak converters
+	cd ..\lib
+	$(PERLEXE) lib_pm.PL
+	cd ..\win32
+	$(PERLEXE) $(PL2BAT) $(UTILS)
+
+distclean: clean
+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
+	-del /f *.def *.map
+	-del /f $(EXTENSION_DLL)
+	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
+	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+	-del /f $(LIBDIR)\XSLoader.pm
+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+	-del /f $(LIBDIR)\File\Glob.pm
+	-del /f $(LIBDIR)\Storable.pm
+	-del /f $(LIBDIR)\Filter\Util\Call.pm
+	-del /f $(LIBDIR)\Digest\MD5.pm
+	-del /f $(LIBDIR)\PerlIO\Scalar.pm
+	-del /f $(LIBDIR)\PerlIO\Via.pm
+	-del /f $(LIBDIR)\MIME\Base64.pm
+	-del /f $(LIBDIR)\MIME\QuotedPrint.pm
+	-del /f $(LIBDIR)\List\Util.pm
+	-del /f $(LIBDIR)\Scalar\Util.pm
+	-del /f $(LIBDIR)\Time\HiRes.pm
+	-del /f $(LIBDIR)\XS\Typemap.pm
+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+	-rmdir /s $(LIBDIR)\IO
+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
+	-rmdir /s $(LIBDIR)\Thread
+	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+	-rmdir /s $(LIBDIR)\B
+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+	-rmdir /s $(LIBDIR)\Data
+	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
+	-rmdir /s $(LIBDIR)\Digest
+	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+	-rmdir /s $(LIBDIR)\MIME
+	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+	-rmdir /s $(LIBDIR)\List
+	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+	-rmdir /s $(LIBDIR)\Scalar
+	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+	-rmdir /s $(LIBDIR)\XS
+	cd $(PODDIR)
+	-del /f *.html *.bat checkpods \
+	    perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
+	    perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
+	    perldos.pod perlepoc.pod perlhurd.pod \
+	    perlhpux.pod perlmachten.pod \
+	    perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
+	    perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
+	    perlsolaris.pod perltru64.pod perluts.pod \
+	    perlvmesa.pod perlvms.pod perlvos.pod \
+	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+	    podchecker podselect
+	cd ..\utils
+	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp
+	-del /f *.bat
+	cd ..\win32
+	cd ..\x2p
+	-del /f find2perl s2p
+	-del /f *.bat
+	cd ..\win32
+	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+	-del /f $(CONFIGPM)
+	-del /f bin\*.bat
+	cd $(EXTDIR)
+	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
+	cd ..\win32
+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+	-rmdir /s $(AUTODIR)
+	-if exist $(COREDIR) rmdir /s /q $(COREDIR)
+	-rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : utils
+	$(PERLEXE) ..\installperl
+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+	$(RCOPY) html\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+	copy splittree.pl ..
+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+	$(RCOPY) ..\lib $(INST_LIB)\*.*
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+	$(XCOPY) $(MINIPERL) ..\t\perl.exe
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	attrib -r ..\t\*.*
+	copy test ..\t
+	cd ..\t
+	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+	cd ..\win32
+
+test-prep : all utils
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+
+test : test-prep
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+test-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+test-wide : test-prep
+	set HARNESS_PERL_SWITCHES=-C
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+test-wide-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1
+	set HARNESS_PERL_SWITCHES=-C
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+clean : Extensions_clean
+	-@$(DEL) miniperlmain$(o)
+	-@$(DEL) $(MINIPERL)
+	-@$(DEL) perlglob$(o)
+	-@$(DEL) perlmain$(o)
+	-@$(DEL) config.w32
+	-@$(DEL) config.h
+	-@$(DEL) $(GLOBEXE)
+	-@$(DEL) $(PERLEXE)
+	-@$(DEL) $(WPERLEXE)
+	-@$(DEL) $(PERLDLL)
+	-@$(DEL) $(CORE_OBJ)
+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+	-rmdir /s $(MINIDIR)
+	-@$(DEL) $(WIN32_OBJ)
+	-@$(DEL) $(DLL_OBJ)
+	-@$(DEL) $(X2P_OBJ)
+	-@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
+	-@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
+	-@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
+	-@$(DEL) *.ilk
+	-@$(DEL) *.pdb
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "nmake nok" instead.
+ok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
diff --git a/win32/makefile.mk b/win32/makefile.mk
index 449dc895fb..6b045ef8b3 100644
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -1,1271 +1,1271 @@
-#

-# Makefile to build perl on Windows NT using DMAKE.

-# Supported compilers:

-#	Visual C++ 2.0 thro 6.0

-#	Borland C++ 5.02

-#	Mingw32 with gcc-2.95.2 or better  **experimental**

-#

-# This is set up to build a perl.exe that runs off a shared library

-# (perl57.dll).  Also makes individual DLLs for the XS extensions.

-#

-

-##

-## Make sure you read README.win32 *before* you mess with anything here!

-##

-

-##

-## Build configuration.  Edit the values below to suit your needs.

-##

-

-#

-# Set these to wherever you want "dmake install" to put your

-# newly built perl.

-#

-INST_DRV	*= c:

-INST_TOP	*= $(INST_DRV)\perl

-

-#

-# Comment this out if you DON'T want your perl installation to be versioned.

-# This means that the new installation will overwrite any files from the

-# old installation at the same INST_TOP location.  Leaving it enabled is

-# the safest route, as perl adds the extra version directory to all the

-# locations it installs files to.  If you disable it, an alternative

-# versioned installation can be obtained by setting INST_TOP above to a

-# path that includes an arbitrary version string.

-#

-INST_VER	*= \5.7.2

-

-#

-# Comment this out if you DON'T want your perl installation to have

-# architecture specific components.  This means that architecture-

-# specific files will be installed along with the architecture-neutral

-# files.  Leaving it enabled is safer and more flexible, in case you

-# want to build multiple flavors of perl and install them together in

-# the same location.  Commenting it out gives you a simpler

-# installation that is easier to understand for beginners.

-#

-INST_ARCH	*= \$(ARCHNAME)

-

-#

-# uncomment to enable multiple interpreters.  This is need for fork()

-# emulation.

-#

-USE_MULTI	*= define

-

-#

-# Beginnings of interpreter cloning/threads; still very incomplete.

-# This should be enabled to get the fork() emulation.  This needs

-# USE_MULTI as well.

-#

-USE_ITHREADS	*= define

-

-#

-# uncomment to enable the implicit "host" layer for all system calls

-# made by perl.  This needs USE_MULTI above.  This is also needed to

-# get fork().

-#

-USE_IMP_SYS	*= define

-

-#

-# uncomment to enable the experimental PerlIO I/O subsystem.

-USE_PERLIO	= define

-

-#

-# WARNING! This option is deprecated and will eventually go away (enable

-# USE_ITHREADS instead).

-#

-# uncomment to enable threads-capabilities.  This is incompatible with

-# USE_ITHREADS, and is only here for people who may have come to rely

-# on the experimental Thread support that was in 5.005.

-#

-#USE_5005THREADS	*= define

-

-#

-# WARNING! This option is deprecated and will eventually go away (enable

-# USE_MULTI instead).

-#

-# uncomment next line if you want to use the PERL_OBJECT build option.

-# DO NOT ENABLE unless you have legacy code that relies on the C++

-# CPerlObj class that was available in 5.005.  This cannot be enabled

-# if you ask for USE_5005THREADS above.

-#

-#USE_OBJECT	*= define

-

-#

-# uncomment exactly one of the following

-#

-# Visual C++ 2.x

-#CCTYPE		*= MSVC20

-# Visual C++ > 2.x and < 6.x

-#CCTYPE		*= MSVC

-# Visual C++ >= 6.x

-CCTYPE		*= MSVC60

-# Borland 5.02 or later

-#CCTYPE		*= BORLAND

-# mingw32+gcc-2.95.2 or better

-#CCTYPE		*= GCC

-

-#

-# uncomment this if your Borland compiler is older than v5.4.

-BCCOLD = define

-#

-# uncomment this if you want to use Borland's VCL as your CRT

-#BCCVCL = define

-

-#

-# uncomment this if you are compiling under Windows 95/98 and command.com

-# (not needed if you're running under 4DOS/NT 6.01 or later)

-#IS_WIN95	*= define

-

-#

-# uncomment next line if you want debug version of perl (big,slow)

-# If not enabled, we automatically try to use maximum optimization

-# with all compilers that are known to have a working optimizer.

-#

-CFG		*= Debug

-

-#

-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.

-# It has patches that fix known bugs in older versions of MSVCRT.DLL.

-# This currently requires VC 5.0 with Service Pack 3 or later.

-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/

-# and follow the directions in the package to install.

-#

-# Not recommended if you have VC 6.x and you're not running Windows 9x.

-#

-#USE_PERLCRT	*= define

-

-#

-# uncomment to enable linking with setargv.obj under the Visual C

-# compiler. Setting this options enables perl to expand wildcards in

-# arguments, but it may be harder to use alternate methods like

-# File::DosGlob that are more powerful.  This option is supported only with

-# Visual C.

-#

-#USE_SETARGV	*= define

-

-#

-# if you have the source for des_fcrypt(), uncomment this and make sure the

-# file exists (see README.win32).  File should be located in the same

-# directory as this file.

-#

-#CRYPT_SRC	*= fcrypt.c

-

-#

-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a

-# library, uncomment this, and make sure the library exists (see README.win32)

-# Specify the full pathname of the library.

-#

-#CRYPT_LIB	*= fcrypt.lib

-

-#

-# set this if you wish to use perl's malloc

-# WARNING: Turning this on/off WILL break binary compatibility with extensions

-# you may have compiled with/without it.  Be prepared to recompile all

-# extensions if you change the default.  Currently, this cannot be enabled

-# if you ask for USE_IMP_SYS above.

-#

-#PERL_MALLOC	*= define

-

-#

-# set the install locations of the compiler include/libraries

-# Running VCVARS32.BAT is *required* when using Visual C.

-# Some versions of Visual C don't define MSVCDIR in the environment,

-# so you may have to set CCHOME explicitly (spaces in the path name should

-# not be quoted)

-#

-#CCHOME		*= F:\borland\bc5

-CCHOME		*= $(MSVCDIR)

-#CCHOME		*= c:\gcc-2.95.2

-CCINCDIR	*= $(CCHOME)\include

-CCLIBDIR	*= $(CCHOME)\lib

-

-#

-# Additional compiler flags can be specified here.

-#

-

-#

-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support

-# for old symbols by default, at the expense of extreme pollution.  You most

-# probably just want to build modules that won't compile with

-#         perl Makefile.PL POLLUTE=1

-# instead of enabling this.  Please report such modules to the respective

-# authors.

-#

-#BUILDOPT	+= -DPERL_POLLUTE

-

-#

-# This should normally be disabled.  Enabling it will disable the File::Glob

-# implementation of CORE::glob.

-#

-#BUILDOPT	+= -DPERL_EXTERNAL_GLOB

-

-#

-# This should normally be disabled.  Enabling it causes perl to read scripts

-# in text mode (which is the 5.005 behavior) and will break ByteLoader.

-#BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS

-

-#

-# specify semicolon-separated list of extra directories that modules will

-# look for libraries (spaces in path names need not be quoted)

-#

-EXTRALIBDIRS	*=

-

-#

-# set this to point to cmd.exe (only needed if you use some

-# alternate shell that doesn't grok cmd.exe style commands)

-#

-#SHELL		*= g:\winnt\system32\cmd.exe

-

-#

-# set this to your email address (perl will guess a value from

-# from your loginname and your hostname, which may not be right)

-#

-#EMAIL		*=

-

-##

-## Build configuration ends.

-##

-

-##################### CHANGE THESE ONLY IF YOU MUST #####################

-

-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""

-D_CRYPT		= undef

-.ELSE

-D_CRYPT		= define

-CRYPT_FLAG	= -DHAVE_DES_FCRYPT

-.ENDIF

-

-.IF "$(USE_OBJECT)" == "define"

-PERL_MALLOC	!= undef

-USE_5005THREADS	!= undef

-USE_MULTI	!= undef

-USE_IMP_SYS	!= define

-.ENDIF

-

-PERL_MALLOC	*= undef

-

-USE_5005THREADS	*= undef

-

-.IF "$(USE_5005THREADS)" == "define"

-USE_ITHREADS	!= undef

-.ENDIF

-

-.IF "$(USE_IMP_SYS)" == "define"

-PERL_MALLOC	!= undef

-.ENDIF

-

-USE_MULTI	*= undef

-USE_OBJECT	*= undef

-USE_ITHREADS	*= undef

-USE_IMP_SYS	*= undef

-USE_PERLIO	*= undef

-USE_PERLCRT	*= undef

-

-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"

-USE_MULTI	!= define

-.ENDIF

-

-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"

-USE_MULTI	!= define

-USE_5005THREADS	!= undef

-.ENDIF

-

-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"

-BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT

-.ENDIF

-

-.IF "$(USE_IMP_SYS)" != "undef"

-BUILDOPT	+= -DPERL_IMPLICIT_SYS

-.ENDIF

-

-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE

-

-PROCESSOR_ARCHITECTURE *= x86

-

-.IF "$(USE_OBJECT)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object

-.ELIF "$(USE_5005THREADS)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread

-.ELIF "$(USE_MULTI)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi

-.ELSE

-.IF "$(USE_PERLIO)" == "define"

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio

-.ELSE

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)

-.ENDIF

-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)

-.ENDIF

-

-.IF "$(USE_ITHREADS)" == "define"

-ARCHNAME	!:= $(ARCHNAME)-thread

-.ENDIF

-

-# Visual Studio 98 specific

-.IF "$(CCTYPE)" == "MSVC60"

-

-# VC 6.0 can load the socket dll on demand.  Makes the test suite

-# run in about 10% less time.

-DELAYLOAD	*= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib

-

-.IF "$(CFG)" == "Debug"

-.ELSE

-# VC 6.0 seems capable of compiling perl correctly with optimizations

-# enabled.  Anything earlier fails tests.

-CFG		*= Optimize

-.ENDIF

-.ENDIF

-

-ARCHDIR		= ..\lib\$(ARCHNAME)

-COREDIR		= ..\lib\CORE

-AUTODIR		= ..\lib\auto

-LIBDIR		= ..\lib

-EXTDIR		= ..\ext

-PODDIR		= ..\pod

-EXTUTILSDIR	= $(LIBDIR)\ExtUtils

-

-#

-INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin

-INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)

-INST_LIB	= $(INST_TOP)$(INST_VER)\lib

-INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)

-INST_COREDIR	= $(INST_ARCHLIB)\CORE

-INST_POD	= $(INST_LIB)\pod

-INST_HTML	= $(INST_TOP)$(INST_VER)\html

-

-#

-# Programs to compile, build .lib files and link

-#

-

-.USESHELL :

-

-.IF "$(CCTYPE)" == "BORLAND"

-

-CC		= bcc32

-.IF "$(BCCOLD)" != "define"

-LINK32		= ilink32

-.ELSE

-LINK32		= tlink32

-.ENDIF

-LIB32		= tlib /P128

-IMPLIB		= implib -c

-RSC		= rc

-

-#

-# Options

-#

-INCLUDES	= -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"

-#PCHFLAGS	= -H -Hc -H=c:\temp\bcmoduls.pch 

-DEFINES		= -DWIN32 $(CRYPT_FLAG)

-LOCDEFS		= -DPERLDLL -DPERL_CORE

-SUBSYS		= console

-CXX_FLAG	= -P

-

-LIBC		= cw32mti.lib

-LIBFILES	= $(CRYPT_LIB) import32.lib $(LIBC)

-

-.IF  "$(CFG)" == "Debug"

-OPTIMIZE	= -v -D_RTLDLL -DDEBUGGING

-LINK_DBG	= -v

-.ELSE

-OPTIMIZE	= -O2 -D_RTLDLL

-LINK_DBG	=

-.ENDIF

-

-CFLAGS		= -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \

-		$(PCHFLAGS) $(OPTIMIZE)

-LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)"  -L"$(CCLIBDIR)"

-OBJOUT_FLAG	= -o

-EXEOUT_FLAG	= -e

-LIBOUT_FLAG	=

-.IF "$(BCCOLD)" != "define"

-LINK_FLAGS	+= -Gn

-DEFINES  += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410

-.END

-.IF "$(BCCVCL)" == "define"

-LIBC		= cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib

-LINK_FLAGS	+= -L"$(CCLIBDIR)\Release"

-.END

-

-

-.ELIF "$(CCTYPE)" == "GCC"

-

-CC		= gcc

-LINK32		= gcc

-LIB32		= ar rc

-IMPLIB		= dlltool

-RSC		= rc

-

-i = .i

-o = .o

-a = .a

-

-#

-# Options

-#

-

-INCLUDES	= -I.\include -I. -I.. -I$(COREDIR)

-DEFINES		= -DWIN32 $(CRYPT_FLAG)

-LOCDEFS		= -DPERLDLL -DPERL_CORE

-SUBSYS		= console

-CXX_FLAG	= -xc++

-

-LIBC		= -lmsvcrt

-

-# same libs as MSVC

-LIBFILES	= $(CRYPT_LIB) $(LIBC) \

-		  -lmoldname -lkernel32 -luser32 -lgdi32 \

-		  -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \

-		  -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \

-		  -lwinmm -lversion -lodbc32

-

-.IF  "$(CFG)" == "Debug"

-OPTIMIZE	= -g -O2 -DDEBUGGING

-LINK_DBG	= -g

-.ELSE

-OPTIMIZE	= -g -O2

-LINK_DBG	= -g

-.ENDIF

-

-CFLAGS		= $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)

-LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"

-OBJOUT_FLAG	= -o

-EXEOUT_FLAG	= -o

-LIBOUT_FLAG	=

-

-# NOTE: we assume that GCC uses MSVCRT.DLL

-BUILDOPT	+= -fno-strict-aliasing -DPERL_MSVCRT_READFIX

-

-.ELSE

-

-CC		= cl

-LINK32		= link

-LIB32		= $(LINK32) -lib

-RSC		= rc

-

-#

-# Options

-#

-

-INCLUDES	= -I$(COREDIR) -I.\include -I. -I..

-#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX

-DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)

-LOCDEFS		= -DPERLDLL -DPERL_CORE

-SUBSYS		= console

-CXX_FLAG	= -TP -GX

-

-.IF "$(USE_PERLCRT)" != "define"

-LIBC	= msvcrt.lib

-.ELSE

-LIBC	= PerlCRT.lib

-.ENDIF

-

-PERLEXE_RES	=

-PERLDLL_RES	=

-

-.IF  "$(CFG)" == "Debug"

-.IF "$(CCTYPE)" == "MSVC20"

-OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING

-LINK_DBG	= -debug -pdb:none

-.ELSE

-# -Zi requires .pdb file(s)

-#OPTIMIZE	= -Od -MD -Zi -DDEBUGGING

-#LINK_DBG	= -debug

-OPTIMIZE	= -O1 -MD -Z7 -DDEBUGGING

-LINK_DBG	= -debug -debugtype:both -pdb:none

-.ENDIF

-.ELSE

-.IF "$(CFG)" == "Optimize"

-# -O1 yields smaller code, which turns out to be faster than -O2

-#OPTIMIZE	= -O2 -MD -DNDEBUG

-OPTIMIZE	= -O1 -MD -DNDEBUG

-.ELSE

-OPTIMIZE	= -Od -MD -DNDEBUG

-.ENDIF

-LINK_DBG	= -release

-.ENDIF

-

-LIBBASEFILES	= $(CRYPT_LIB) \

-		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \

-		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \

-		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \

-		version.lib odbc32.lib odbccp32.lib

-

-# we add LIBC here, since we may be using PerlCRT.dll

-LIBFILES	= $(LIBBASEFILES) $(LIBC)

-

-CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \

-		$(PCHFLAGS) $(OPTIMIZE)

-LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \

-		-libpath:"$(INST_COREDIR)" \

-		-machine:$(PROCESSOR_ARCHITECTURE)

-OBJOUT_FLAG	= -Fo

-EXEOUT_FLAG	= -Fe

-LIBOUT_FLAG	= /out:

-

-.IF "$(USE_PERLCRT)" != "define"

-BUILDOPT	+= -DPERL_MSVCRT_READFIX

-.ENDIF

-

-.ENDIF

-

-.IF "$(USE_OBJECT)" == "define"

-OPTIMIZE	+= $(CXX_FLAG)

-BUILDOPT	+= -DPERL_OBJECT

-.ENDIF

-

-CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

-

-# used to allow local linking flags that are not propogated into Config.pm,

-# currently unused

-#   -- BKS, 12-12-1999

-PRIV_LINK_FLAGS	*=

-BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)

-

-#################### do not edit below this line #######################

-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

-

-o *= .obj

-a *= .lib

-

-LKPRE		= INPUT (

-LKPOST		= )

-

-#

-# Rules

-#

-

-.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res

-

-.c$(o):

-	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

-

-.c.i:

-	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@

-

-.y.c:

-	$(NOOP)

-

-$(o).dll:

-.IF "$(CCTYPE)" == "BORLAND"

-	$(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def

-	$(IMPLIB) $(*B).lib $@

-.ELIF "$(CCTYPE)" == "GCC"

-	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)

-	$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@

-.ELSE

-	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \

-	    -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)

-.ENDIF

-

-.rc.res:

-	$(RSC) -i.. $<

-

-#

-# various targets

-MINIPERL	= ..\miniperl.exe

-MINIDIR		= .\mini

-PERLEXE		= ..\perl.exe

-WPERLEXE	= ..\wperl.exe

-GLOBEXE		= ..\perlglob.exe

-CONFIGPM	= ..\lib\Config.pm

-MINIMOD		= ..\lib\ExtUtils\Miniperl.pm

-X2P		= ..\x2p\a2p.exe

-

-# Nominate a target which causes extensions to be re-built

-# This used to be $(PERLEXE), but at worst it is the .dll that they depend

-# on and really only the interface - i.e. the .def file used to export symbols

-# from the .dll

-PERLDEP = perldll.def

-

-

-PL2BAT		= bin\pl2bat.pl

-GLOBBAT		= bin\perlglob.bat

-

-UTILS		=			\

-		..\utils\h2ph		\

-		..\utils\splain		\

-		..\utils\dprofpp	\

-		..\utils\perlbug	\

-		..\utils\pl2pm 		\

-		..\utils\c2ph		\

-		..\utils\h2xs		\

-		..\utils\perldoc	\

-		..\utils\perlcc		\

-		..\utils\perlivp	\

-		..\utils\libnetcfg	\

-		..\pod\checkpods	\

-		..\pod\pod2html		\

-		..\pod\pod2latex	\

-		..\pod\pod2man		\

-		..\pod\pod2text		\

-		..\pod\pod2usage	\

-		..\pod\podchecker	\

-		..\pod\podselect	\

-		..\x2p\find2perl	\

-		..\x2p\s2p		\

-		..\lib\ExtUtils\xsubpp	\

-		bin\exetype.pl		\

-		bin\runperl.pl		\

-		bin\pl2bat.pl		\

-		bin\perlglob.pl		\

-		bin\search.pl

-

-.IF "$(CCTYPE)" == "BORLAND"

-

-CFGSH_TMPL	= config.bc

-CFGH_TMPL	= config_H.bc

-

-.ELIF "$(CCTYPE)" == "GCC"

-

-CFGSH_TMPL	= config.gc

-CFGH_TMPL	= config_H.gc

-PERLIMPLIB	= ..\libperl57$(a)

-

-.ELSE

-

-CFGSH_TMPL	= config.vc

-CFGH_TMPL	= config_H.vc

-

-.ENDIF

-

-# makedef.pl must be updated if this changes, and this should normally

-# only change when there is an incompatible revision of the public API.

-# XXX so why did we change it from perl56 to perl57?

-PERLIMPLIB	*= ..\perl57$(a)

-PERLDLL		= ..\perl57.dll

-

-XCOPY		= xcopy /f /r /i /d

-RCOPY		= xcopy /f /r /i /e /d

-NOOP		= @echo

-

-#

-# filenames given to xsubpp must have forward slashes (since it puts

-# full pathnames in #line strings)

-XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \

-		-C++ -prototypes

-

-MICROCORE_SRC	=		\

-		..\av.c		\

-		..\deb.c	\

-		..\doio.c	\

-		..\doop.c	\

-		..\dump.c	\

-		..\globals.c	\

-		..\gv.c		\

-		..\hv.c		\

-		..\locale.c	\

-		..\mg.c		\

-		..\numeric.c	\

-		..\op.c		\

-		..\perl.c	\

-		..\perlapi.c	\

-		..\perly.c	\

-		..\pp.c		\

-		..\pp_ctl.c	\

-		..\pp_hot.c	\

-		..\pp_pack.c	\

-		..\pp_sys.c	\

-		..\regcomp.c	\

-		..\regexec.c	\

-		..\run.c	\

-		..\scope.c	\

-		..\sv.c		\

-		..\taint.c	\

-		..\toke.c	\

-		..\universal.c	\

-		..\utf8.c	\

-		..\util.c	\

-		..\xsutils.c

-

-EXTRACORE_SRC	+= perllib.c

-

-.IF "$(PERL_MALLOC)" == "define"

-EXTRACORE_SRC	+= ..\malloc.c

-.ENDIF

-

-.IF "$(USE_OBJECT)" != "define"

-EXTRACORE_SRC	+= ..\perlio.c

-.ENDIF

-

-WIN32_SRC	=		\

-		.\win32.c	\

-		.\win32io.c	\

-		.\win32sck.c	\

-		.\win32thread.c

-

-.IF "$(CRYPT_SRC)" != ""

-WIN32_SRC	+= .\$(CRYPT_SRC)

-.ENDIF

-

-DLL_SRC		= $(DYNALOADER).c

-

-X2P_SRC		=		\

-		..\x2p\a2p.c	\

-		..\x2p\hash.c	\

-		..\x2p\str.c	\

-		..\x2p\util.c	\

-		..\x2p\walk.c

-

-CORE_NOCFG_H	=		\

-		..\av.h		\

-		..\cop.h	\

-		..\cv.h		\

-		..\dosish.h	\

-		..\embed.h	\

-		..\form.h	\

-		..\gv.h		\

-		..\handy.h	\

-		..\hv.h		\

-		..\iperlsys.h	\

-		..\mg.h		\

-		..\nostdio.h	\

-		..\op.h		\

-		..\opcode.h	\

-		..\perl.h	\

-		..\perlapi.h	\

-		..\perlsdio.h	\

-		..\perlsfio.h	\

-		..\perly.h	\

-		..\pp.h		\

-		..\proto.h	\

-		..\regexp.h	\

-		..\scope.h	\

-		..\sv.h		\

-		..\thread.h	\

-		..\unixish.h	\

-		..\utf8.h	\

-		..\util.h	\

-		..\warnings.h	\

-		..\XSUB.h	\

-		..\EXTERN.h	\

-		..\perlvars.h	\

-		..\intrpvar.h	\

-		..\thrdvar.h	\

-		.\include\dirent.h	\

-		.\include\netdb.h	\

-		.\include\sys\socket.h	\

-		.\win32.h

-

-CORE_H		= $(CORE_NOCFG_H) .\config.h

-

-MICROCORE_OBJ	= $(MICROCORE_SRC:db:+$(o))

-CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))

-WIN32_OBJ	= $(WIN32_SRC:db:+$(o))

-MINICORE_OBJ	= $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}

-MINIWIN32_OBJ	= $(MINIDIR)\{$(WIN32_OBJ:f)}

-MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)

-DLL_OBJ		= $(DLL_SRC:db:+$(o))

-X2P_OBJ		= $(X2P_SRC:db:+$(o))

-

-PERLDLL_OBJ	= $(CORE_OBJ)

-PERLEXE_OBJ	= perlmain$(o)

-

-PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)

-

-.IF "$(USE_SETARGV)" != ""

-SETARGV_OBJ	= setargv$(o)

-.ENDIF

-

-DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \

-		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \

-		Sys/Hostname Storable Filter/Util/Call Encode \

-		Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes

-STATIC_EXT	= DynaLoader

-NONXS_EXT	= Errno

-

-DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader

-

-POD2HTML	= $(PODDIR)\pod2html

-POD2MAN		= $(PODDIR)\pod2man

-POD2LATEX	= $(PODDIR)\pod2latex

-POD2TEXT	= $(PODDIR)\pod2text

-

-# vars must be separated by "\t+~\t+", since we're using the tempfile

-# version of config_sh.pl (we were overflowing someone's buffer by

-# trying to fit them all on the command line)

-#	-- BKS 10-17-1999

-CFG_VARS	=					\

-		INST_DRV=$(INST_DRV)		~	\

-		INST_TOP=$(INST_TOP:s/\/\\/)	~	\

-		INST_VER=$(INST_VER:s/\/\\/)	~	\

-		INST_ARCH=$(INST_ARCH)		~	\

-		archname=$(ARCHNAME)		~	\

-		cc=$(CC)			~	\

-		ld=$(LINK32)			~	\

-		ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)	~	\

-		cf_email=$(EMAIL)		~	\

-		d_crypt=$(D_CRYPT)		~	\

-		d_mymalloc=$(PERL_MALLOC)	~	\

-		libs=$(LIBFILES:f)		~	\

-		incpath=$(CCINCDIR:s/\/\\/)	~	\

-		libperl=$(PERLIMPLIB:f)		~	\

-		libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)	~	\

-		libc=$(LIBC)			~	\

-		make=dmake			~	\

-		_o=$(o)	obj_ext=$(o)		~	\

-		_a=$(a)	lib_ext=$(a)		~	\

-		static_ext=$(STATIC_EXT)	~	\

-		use5005threads=$(USE_5005THREADS)	~	\

-		useithreads=$(USE_ITHREADS)	~	\

-		usethreads=$(USE_5005THREADS)	~	\

-		usemultiplicity=$(USE_MULTI)	~	\

-		useperlio=$(USE_PERLIO)		~	\

-		LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)		~	\

-		optimize=$(OPTIMIZE)

-

-#

-# set up targets varying between Win95 and WinNT builds

-#

-

-.IF "$(IS_WIN95)" == "define"

-MK2 		= .\makefile.95

-RIGHTMAKE	= __switch_makefiles

-NOOP		= @rem

-.ELSE

-MK2		= __not_needed

-RIGHTMAKE	=

-.ENDIF

-

-#

-# Top targets

-#

-

-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)		\

-	$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)	\

-	$(X2P) Extensions 

-

-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

-

-#----------------------------------------------------------------

-

-#-------------------- BEGIN Win95 SPECIFIC ----------------------

-

-# this target is a jump-off point for Win95

-#  1. it switches to the Win95-specific makefile if it exists

-#     (__do_switch_makefiles)

-#  2. it prints a message when the Win95-specific one finishes (__done)

-#  3. it then kills this makefile by trying to make __no_such_target

-

-__switch_makefiles: __do_switch_makefiles __done __no_such_target

-

-__do_switch_makefiles:

-.IF "$(NOTFIRST)" != "true"

-	if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true

-.ELSE

-	$(NOOP)

-.ENDIF

-

-.IF "$(NOTFIRST)" != "true"

-__done:

-	@echo Build process complete. Ignore any errors after this message.

-	@echo Run "dmake test" to test and "dmake install" to install

-

-.ELSE

-# dummy targets for Win95-specific makefile

-

-__done:

-	$(NOOP)

-

-__no_such_target:

-	$(NOOP)

-

-.ENDIF

-

-# This target is used to generate the new makefile (.\makefile.95) for Win95

-

-.\makefile.95: .\makefile.mk

-	$(MINIPERL) genmk95.pl makefile.mk $(MK2)

-

-#--------------------- END Win95 SPECIFIC ---------------------

-

-# a blank target for when builds don't need to do certain things

-# this target added for Win95 port but used to keep the WinNT port able to

-# use this file

-__not_needed:

-	$(NOOP)

-

-$(GLOBEXE) : perlglob$(o)

-.IF "$(CCTYPE)" == "BORLAND"

-	$(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c

-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \

-	    "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,

-.ELIF "$(CCTYPE)" == "GCC"

-	$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)

-.ELSE

-	$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \

-	    perlglob$(o) setargv$(o)

-.ENDIF

-

-perlglob$(o)  : perlglob.c

-

-config.w32 : $(CFGSH_TMPL)

-	copy $(CFGSH_TMPL) config.w32

-

-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)

-	-del /f config.h

-	copy $(CFGH_TMPL) config.h

-

-..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm

-	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \

-	    $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh

-

-# this target is for when changes to the main config.sh happen

-# edit config.{b,v,g}c and make this target once for each supported

-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)

-regen_config_h:

-	perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \

-	    $(CFGSH_TMPL) > ..\config.sh

-	-cd .. && del /f perl.exe

-	cd .. && perl configpm

-	-del /f $(CFGH_TMPL)

-	-mkdir $(COREDIR)

-	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"

-	rename config.h $(CFGH_TMPL)

-

-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl

-	cd .. && miniperl configpm

-	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)

-	$(XCOPY) ..\*.h $(COREDIR)\*.*

-	$(XCOPY) *.h $(COREDIR)\*.*

-	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*

-	$(RCOPY) include $(COREDIR)\*.*

-	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \

-	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)

-

-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)

-.IF "$(CCTYPE)" == "BORLAND"

-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \

-	    @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)

-.ELIF "$(CCTYPE)" == "GCC"

-	$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \

-	    $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))

-.ELSE

-	$(LINK32) -subsystem:console -out:$@ \

-	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))

-.ENDIF

-

-$(MINIDIR) :

-	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

-

-$(MINICORE_OBJ) : $(CORE_NOCFG_H)

-	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c

-

-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)

-	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c

-

-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c

-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless

-# unless the .IF is true), so instead we use a .ELSE with the default.

-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

-

-perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h

-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"

-	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c

-.ELSE

-	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c

-.ENDIF

-

-# 1. we don't want to rebuild miniperl.exe when config.h changes

-# 2. we don't want to rebuild miniperl.exe with non-default config.h

-$(MINI_OBJ)	: $(CORE_NOCFG_H)

-

-$(WIN32_OBJ)	: $(CORE_H)

-$(CORE_OBJ)	: $(CORE_H)

-$(DLL_OBJ)	: $(CORE_H)

-$(X2P_OBJ)	: $(CORE_H)

-

-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl

-	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \

-	$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def

-

-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)

-.IF "$(CCTYPE)" == "BORLAND"

-	$(LINK32) -Tpd -ap $(BLINK_FLAGS) \

-	    @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \

-		$@,\n \

-		$(LIBFILES)\n \

-		perldll.def\n)

-	$(IMPLIB) $*.lib $@

-.ELIF "$(CCTYPE)" == "GCC"

-	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \

-	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))

-	dlltool --output-lib $(PERLIMPLIB) \

-		--dllname $(PERLDLL:b).dll \

-		--def perldll.def \

-		--base-file perl.base \

-		--output-exp perl.exp

-	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \

-	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \

-		perl.exp $(LKPOST))

-.ELSE

-	$(LINK32) -dll -def:perldll.def -out:$@ \

-	    @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \

-	        $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))

-.ENDIF

-	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

-

-$(MINIMOD) : $(MINIPERL) ..\minimod.pl

-	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

-

-..\x2p\a2p$(o) : ..\x2p\a2p.c

-	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

-

-..\x2p\hash$(o) : ..\x2p\hash.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

-

-..\x2p\str$(o) : ..\x2p\str.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

-

-..\x2p\util$(o) : ..\x2p\util.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

-

-..\x2p\walk$(o) : ..\x2p\walk.c

-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

-

-$(X2P) : $(MINIPERL) $(X2P_OBJ)

-	$(MINIPERL) ..\x2p\find2perl.PL

-	$(MINIPERL) ..\x2p\s2p.PL

-.IF "$(CCTYPE)" == "BORLAND"

-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \

-	    @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)

-.ELIF "$(CCTYPE)" == "GCC"

-	$(LINK32) -v -o $@ $(BLINK_FLAGS) \

-	    $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))

-.ELSE

-	$(LINK32) -subsystem:console -out:$@ \

-	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))

-.ENDIF

-

-perlmain.c : runperl.c

-	copy runperl.c perlmain.c

-

-perlmain$(o) : perlmain.c

-	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

-

-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)

-.IF "$(CCTYPE)" == "BORLAND"

-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \

-	    @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \

-	    $(@:s,\,\\),\n \

-	    $(PERLIMPLIB) $(LIBFILES)\n)

-.ELIF "$(CCTYPE)" == "GCC"

-	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \

-	    $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)

-.ELSE

-	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \

-	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)

-.ENDIF

-	copy $(PERLEXE) $(WPERLEXE)

-	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS

-	copy splittree.pl ..

-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

-

-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)

-	if not exist $(AUTODIR) mkdir $(AUTODIR)

-	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL

-	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL

-	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)

-	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)

-	cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c

-	$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .

-

-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs

-	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

-

-#----------------------------------------------------------------------------------

-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) 

-	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)

-

-Extensions_clean : 

-	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean

-

-#----------------------------------------------------------------------------------

-

-

-doc: $(PERLEXE)

-	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \

-	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\

-	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

-

-utils: $(PERLEXE) $(X2P)

-	cd ..\utils && $(MAKE) PERL=$(MINIPERL)

-	copy ..\README.aix	..\pod\perlaix.pod

-	copy ..\README.amiga	..\pod\perlamiga.pod

-	copy ..\README.apollo	..\pod\perlapollo.pod

-	copy ..\README.beos	..\pod\perlbeos.pod

-	copy ..\README.bs2000	..\pod\perlbs2000.pod

-	copy ..\README.ce	..\pod\perlce.pod

-	copy ..\README.cygwin	..\pod\perlcygwin.pod

-	copy ..\README.dgux	..\pod\perldgux.pod

-	copy ..\README.dos	..\pod\perldos.pod

-	copy ..\README.epoc	..\pod\perlepoc.pod

-	copy ..\README.hpux	..\pod\perlhpux.pod

-	copy ..\README.hurd	..\pod\perlhurd.pod

-	copy ..\README.machten	..\pod\perlmachten.pod

-	copy ..\README.macos	..\pod\perlmacos.pod

-	copy ..\README.mint	..\pod\perlmint.pod

-	copy ..\README.mpeix	..\pod\perlmpeix.pod

-	copy ..\README.netware	..\pod\perlnetware.pod

-	copy ..\README.os2	..\pod\perlos2.pod

-	copy ..\README.os390	..\pod\perlos390.pod

-	copy ..\README.plan9	..\pod\perlplan9.pod

-	copy ..\README.qnx	..\pod\perlqnx.pod

-	copy ..\README.solaris	..\pod\perlsolaris.pod

-	copy ..\README.tru64	..\pod\perltru64.pod

-	copy ..\README.uts	..\pod\perluts.pod

-	copy ..\README.vmesa	..\pod\perlvmesa.pod

-	copy ..\vms\perlvms.pod	..\pod\perlvms.pod

-	copy ..\README.vos	..\pod\perlvos.pod

-	copy ..\README.win32	..\pod\perlwin32.pod

-	cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters

-	cd ..\lib && $(PERLEXE) lib_pm.PL

-	$(PERLEXE) $(PL2BAT) $(UTILS)

-

-distclean: clean

-	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \

-		$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)

-	-del /f *.def *.map

-	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs

-	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm

-	-del /f $(LIBDIR)\XSLoader.pm

-	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm

-	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm

-	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm

-	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm

-	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm

-	-del /f $(LIBDIR)\PerlIO\Scalar.pm

-	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm

-	-del /f $(LIBDIR)\File\Glob.pm

-	-del /f $(LIBDIR)\Storable.pm

-	-del /f $(LIBDIR)\Filter\Util\Call.pm

-	-del /f $(LIBDIR)\Digest\MD5.pm

-	-del /f $(LIBDIR)\MIME\Base64.pm

-	-del /f $(LIBDIR)\MIME\QuotedPrint.pm

-	-del /f $(LIBDIR)\Time\HiRes.pm

-	-del /f $(LIBDIR)\List\Util.pm

-	-del /f $(LIBDIR)\Scalar\Util.pm

-	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO

-	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread

-	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B

-	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data

-	-if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter

-	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter

-	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest

-	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME

-	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List

-	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar

-	-cd $(PODDIR) && del /f *.html *.bat checkpods \

-	    perlaix.pod perlamiga.pod perlapollo.pod \

-	    perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \

-	    perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \

-	    perlmachten.pod perlmint.pod \

-	    perlmacos.pod perlmpeix.pod perlnetware.pod \

-	    perlos2.pod perlos390.pod \

-	    perlplan9.pod perlqnx.pod \

-	    perlsolaris.pod perltru64.pod perluts.pod \

-	    perlvmesa.pod perlvms.pod perlvos.pod \

-	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \

-	    podchecker podselect

-	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \

-	    perlivp dprofpp *.bat

-	-cd ..\x2p && del /f find2perl s2p *.bat

-	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new

-	-del /f $(CONFIGPM)

-	-del /f bin\*.bat

-	-cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \

-	    pm_to_blib

-	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)

-	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)

-

-install : all installbare installhtml

-

-installbare : $(RIGHTMAKE) utils

-	$(PERLEXE) ..\installperl

-	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*

-	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*

-	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

-

-installhtml : doc

-	$(RCOPY) html\*.* $(INST_HTML)\*.*

-

-inst_lib : $(CONFIGPM)

-	copy splittree.pl ..

-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

-	$(RCOPY) ..\lib $(INST_LIB)\*.*

-

-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils

-	$(XCOPY) $(MINIPERL) ..\t\perl.exe

-.IF "$(CCTYPE)" == "BORLAND"

-	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)

-.ELSE

-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

-.ENDIF

-	attrib -r ..\t\*.*

-	copy test ..\t

-	cd ..\t && \

-	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

-

-test-prep : all utils

-	$(XCOPY) $(PERLEXE) ..\t\$(NULL)

-	$(XCOPY) $(PERLDLL) ..\t\$(NULL)

-.IF "$(CCTYPE)" == "BORLAND"

-	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)

-.ELSE

-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

-.ENDIF

-

-test : $(RIGHTMAKE) test-prep

-	cd ..\t && $(PERLEXE) -I..\lib harness

-

-test-notty : test-prep

-	set PERL_SKIP_TTY_TEST=1 && \

-	    cd ..\t && $(PERLEXE) -I.\lib harness

-

-test-wide : test-prep

-	set HARNESS_PERL_SWITCHES=-C && \

-	    cd ..\t && $(PERLEXE) -I..\lib harness

-

-test-wide-notty : test-prep

-	set PERL_SKIP_TTY_TEST=1 && \

-	    set HARNESS_PERL_SWITCHES=-C && \

-	    cd ..\t && $(PERLEXE) -I..\lib harness

-

-clean : Extensions_clean

-	-@erase miniperlmain$(o)

-	-@erase $(MINIPERL)

-	-@erase perlglob$(o)

-	-@erase perlmain$(o)

-	-@erase config.w32

-	-@erase /f config.h

-	-@erase $(GLOBEXE)

-	-@erase $(PERLEXE)

-	-@erase $(WPERLEXE)

-	-@erase $(PERLDLL)

-	-@erase $(CORE_OBJ)

-	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)

-	-@erase $(WIN32_OBJ)

-	-@erase $(DLL_OBJ)

-	-@erase $(X2P_OBJ)

-	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res

-	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat

-	-@erase ..\x2p\*.exe ..\x2p\*.bat

-	-@erase *.ilk

-	-@erase *.pdb

-

-# Handy way to run perlbug -ok without having to install and run the

-# installed perlbug. We don't re-run the tests here - we trust the user.

-# Please *don't* use this unless all tests pass.

-# If you want to report test failures, use "dmake nok" instead.

-ok: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

-

-okfile: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

-

-nok: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"

-

-nokfile: utils

-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok

+#
+# Makefile to build perl on Windows NT using DMAKE.
+# Supported compilers:
+#	Visual C++ 2.0 thro 6.0
+#	Borland C++ 5.02
+#	Mingw32 with gcc-2.95.2 or better  **experimental**
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl57.dll).  Also makes individual DLLs for the XS extensions.
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration.  Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "dmake install" to put your
+# newly built perl.
+#
+INST_DRV	*= c:
+INST_TOP	*= $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location.  Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to.  If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+INST_VER	*= \5.7.2
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components.  This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files.  Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location.  Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+INST_ARCH	*= \$(ARCHNAME)
+
+#
+# uncomment to enable multiple interpreters.  This is need for fork()
+# emulation.
+#
+USE_MULTI	*= define
+
+#
+# Beginnings of interpreter cloning/threads; still very incomplete.
+# This should be enabled to get the fork() emulation.  This needs
+# USE_MULTI as well.
+#
+USE_ITHREADS	*= define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl.  This needs USE_MULTI above.  This is also needed to
+# get fork().
+#
+USE_IMP_SYS	*= define
+
+#
+# uncomment to enable the experimental PerlIO I/O subsystem.
+USE_PERLIO	= define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_ITHREADS instead).
+#
+# uncomment to enable threads-capabilities.  This is incompatible with
+# USE_ITHREADS, and is only here for people who may have come to rely
+# on the experimental Thread support that was in 5.005.
+#
+#USE_5005THREADS	*= define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_MULTI instead).
+#
+# uncomment next line if you want to use the PERL_OBJECT build option.
+# DO NOT ENABLE unless you have legacy code that relies on the C++
+# CPerlObj class that was available in 5.005.  This cannot be enabled
+# if you ask for USE_5005THREADS above.
+#
+#USE_OBJECT	*= define
+
+#
+# uncomment exactly one of the following
+#
+# Visual C++ 2.x
+#CCTYPE		*= MSVC20
+# Visual C++ > 2.x and < 6.x
+#CCTYPE		*= MSVC
+# Visual C++ >= 6.x
+CCTYPE		*= MSVC60
+# Borland 5.02 or later
+#CCTYPE		*= BORLAND
+# mingw32+gcc-2.95.2 or better
+#CCTYPE		*= GCC
+
+#
+# uncomment this if your Borland compiler is older than v5.4.
+BCCOLD = define
+#
+# uncomment this if you want to use Borland's VCL as your CRT
+#BCCVCL = define
+
+#
+# uncomment this if you are compiling under Windows 95/98 and command.com
+# (not needed if you're running under 4DOS/NT 6.01 or later)
+#IS_WIN95	*= define
+
+#
+# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
+CFG		*= Debug
+
+#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
+#USE_PERLCRT	*= define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful.  This option is supported only with
+# Visual C.
+#
+#USE_SETARGV	*= define
+
+#
+# if you have the source for des_fcrypt(), uncomment this and make sure the
+# file exists (see README.win32).  File should be located in the same
+# directory as this file.
+#
+#CRYPT_SRC	*= fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+# Specify the full pathname of the library.
+#
+#CRYPT_LIB	*= fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it.  Be prepared to recompile all
+# extensions if you change the default.  Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC	*= define
+
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+#CCHOME		*= F:\borland\bc5
+CCHOME		*= $(MSVCDIR)
+#CCHOME		*= c:\gcc-2.95.2
+CCINCDIR	*= $(CCHOME)\include
+CCLIBDIR	*= $(CCHOME)\lib
+
+#
+# Additional compiler flags can be specified here.
+#
+
+#
+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution.  You most
+# probably just want to build modules that won't compile with
+#         perl Makefile.PL POLLUTE=1
+# instead of enabling this.  Please report such modules to the respective
+# authors.
+#
+#BUILDOPT	+= -DPERL_POLLUTE
+
+#
+# This should normally be disabled.  Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT	+= -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled.  Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS	*=
+
+#
+# set this to point to cmd.exe (only needed if you use some
+# alternate shell that doesn't grok cmd.exe style commands)
+#
+#SHELL		*= g:\winnt\system32\cmd.exe
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL		*=
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT		= undef
+.ELSE
+D_CRYPT		= define
+CRYPT_FLAG	= -DHAVE_DES_FCRYPT
+.ENDIF
+
+.IF "$(USE_OBJECT)" == "define"
+PERL_MALLOC	!= undef
+USE_5005THREADS	!= undef
+USE_MULTI	!= undef
+USE_IMP_SYS	!= define
+.ENDIF
+
+PERL_MALLOC	*= undef
+
+USE_5005THREADS	*= undef
+
+.IF "$(USE_5005THREADS)" == "define"
+USE_ITHREADS	!= undef
+.ENDIF
+
+.IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC	!= undef
+.ENDIF
+
+USE_MULTI	*= undef
+USE_OBJECT	*= undef
+USE_ITHREADS	*= undef
+USE_IMP_SYS	*= undef
+USE_PERLIO	*= undef
+USE_PERLCRT	*= undef
+
+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+USE_MULTI	!= define
+.ENDIF
+
+.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+USE_MULTI	!= define
+USE_5005THREADS	!= undef
+.ENDIF
+
+.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT
+.ENDIF
+
+.IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT	+= -DPERL_IMPLICIT_SYS
+.ENDIF
+
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
+
+PROCESSOR_ARCHITECTURE *= x86
+
+.IF "$(USE_OBJECT)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+.ELIF "$(USE_5005THREADS)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+.ELIF "$(USE_MULTI)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+.ELSE
+.IF "$(USE_PERLIO)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+.ELSE
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
+.ENDIF
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
+.ENDIF
+
+.IF "$(USE_ITHREADS)" == "define"
+ARCHNAME	!:= $(ARCHNAME)-thread
+.ENDIF
+
+# Visual Studio 98 specific
+.IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand.  Makes the test suite
+# run in about 10% less time.
+DELAYLOAD	*= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+
+.IF "$(CFG)" == "Debug"
+.ELSE
+# VC 6.0 seems capable of compiling perl correctly with optimizations
+# enabled.  Anything earlier fails tests.
+CFG		*= Optimize
+.ENDIF
+.ENDIF
+
+ARCHDIR		= ..\lib\$(ARCHNAME)
+COREDIR		= ..\lib\CORE
+AUTODIR		= ..\lib\auto
+LIBDIR		= ..\lib
+EXTDIR		= ..\ext
+PODDIR		= ..\pod
+EXTUTILSDIR	= $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB	= $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
+INST_COREDIR	= $(INST_ARCHLIB)\CORE
+INST_POD	= $(INST_LIB)\pod
+INST_HTML	= $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+.USESHELL :
+
+.IF "$(CCTYPE)" == "BORLAND"
+
+CC		= bcc32
+.IF "$(BCCOLD)" != "define"
+LINK32		= ilink32
+.ELSE
+LINK32		= tlink32
+.ENDIF
+LIB32		= tlib /P128
+IMPLIB		= implib -c
+RSC		= rc
+
+#
+# Options
+#
+INCLUDES	= -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
+#PCHFLAGS	= -H -Hc -H=c:\temp\bcmoduls.pch 
+DEFINES		= -DWIN32 $(CRYPT_FLAG)
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -P
+
+LIBC		= cw32mti.lib
+LIBFILES	= $(CRYPT_LIB) import32.lib $(LIBC)
+
+.IF  "$(CFG)" == "Debug"
+OPTIMIZE	= -v -D_RTLDLL -DDEBUGGING
+LINK_DBG	= -v
+.ELSE
+OPTIMIZE	= -O2 -D_RTLDLL
+LINK_DBG	=
+.ENDIF
+
+CFLAGS		= -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+		$(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)"  -L"$(CCLIBDIR)"
+OBJOUT_FLAG	= -o
+EXEOUT_FLAG	= -e
+LIBOUT_FLAG	=
+.IF "$(BCCOLD)" != "define"
+LINK_FLAGS	+= -Gn
+DEFINES  += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
+.END
+.IF "$(BCCVCL)" == "define"
+LIBC		= cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
+LINK_FLAGS	+= -L"$(CCLIBDIR)\Release"
+.END
+
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CC		= gcc
+LINK32		= gcc
+LIB32		= ar rc
+IMPLIB		= dlltool
+RSC		= rc
+
+i = .i
+o = .o
+a = .a
+
+#
+# Options
+#
+
+INCLUDES	= -I.\include -I. -I.. -I$(COREDIR)
+DEFINES		= -DWIN32 $(CRYPT_FLAG)
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -xc++
+
+LIBC		= -lmsvcrt
+
+# same libs as MSVC
+LIBFILES	= $(CRYPT_LIB) $(LIBC) \
+		  -lmoldname -lkernel32 -luser32 -lgdi32 \
+		  -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
+		  -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
+		  -lwinmm -lversion -lodbc32
+
+.IF  "$(CFG)" == "Debug"
+OPTIMIZE	= -g -O2 -DDEBUGGING
+LINK_DBG	= -g
+.ELSE
+OPTIMIZE	= -g -O2
+LINK_DBG	= -g
+.ENDIF
+
+CFLAGS		= $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
+LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+OBJOUT_FLAG	= -o
+EXEOUT_FLAG	= -o
+LIBOUT_FLAG	=
+
+# NOTE: we assume that GCC uses MSVCRT.DLL
+BUILDOPT	+= -fno-strict-aliasing -DPERL_MSVCRT_READFIX
+
+.ELSE
+
+CC		= cl
+LINK32		= link
+LIB32		= $(LINK32) -lib
+RSC		= rc
+
+#
+# Options
+#
+
+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX
+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -TP -GX
+
+.IF "$(USE_PERLCRT)" != "define"
+LIBC	= msvcrt.lib
+.ELSE
+LIBC	= PerlCRT.lib
+.ENDIF
+
+PERLEXE_RES	=
+PERLDLL_RES	=
+
+.IF  "$(CFG)" == "Debug"
+.IF "$(CCTYPE)" == "MSVC20"
+OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
+LINK_DBG	= -debug -pdb:none
+.ELSE
+# -Zi requires .pdb file(s)
+#OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
+#LINK_DBG	= -debug
+OPTIMIZE	= -O1 -MD -Z7 -DDEBUGGING
+LINK_DBG	= -debug -debugtype:both -pdb:none
+.ENDIF
+.ELSE
+.IF "$(CFG)" == "Optimize"
+# -O1 yields smaller code, which turns out to be faster than -O2
+#OPTIMIZE	= -O2 -MD -DNDEBUG
+OPTIMIZE	= -O1 -MD -DNDEBUG
+.ELSE
+OPTIMIZE	= -Od -MD -DNDEBUG
+.ENDIF
+LINK_DBG	= -release
+.ENDIF
+
+LIBBASEFILES	= $(CRYPT_LIB) \
+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+		version.lib odbc32.lib odbccp32.lib
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES	= $(LIBBASEFILES) $(LIBC)
+
+CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+		$(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
+		-libpath:"$(INST_COREDIR)" \
+		-machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG	= -Fo
+EXEOUT_FLAG	= -Fe
+LIBOUT_FLAG	= /out:
+
+.IF "$(USE_PERLCRT)" != "define"
+BUILDOPT	+= -DPERL_MSVCRT_READFIX
+.ENDIF
+
+.ENDIF
+
+.IF "$(USE_OBJECT)" == "define"
+OPTIMIZE	+= $(CXX_FLAG)
+BUILDOPT	+= -DPERL_OBJECT
+.ENDIF
+
+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
+
+# used to allow local linking flags that are not propogated into Config.pm,
+# currently unused
+#   -- BKS, 12-12-1999
+PRIV_LINK_FLAGS	*=
+BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o *= .obj
+a *= .lib
+
+LKPRE		= INPUT (
+LKPOST		= )
+
+#
+# Rules
+#
+
+.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
+
+.c$(o):
+	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.c.i:
+	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
+
+.y.c:
+	$(NOOP)
+
+$(o).dll:
+.IF "$(CCTYPE)" == "BORLAND"
+	$(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
+	$(IMPLIB) $(*B).lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
+	$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
+.ELSE
+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+	    -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+.ENDIF
+
+.rc.res:
+	$(RSC) -i.. $<
+
+#
+# various targets
+MINIPERL	= ..\miniperl.exe
+MINIDIR		= .\mini
+PERLEXE		= ..\perl.exe
+WPERLEXE	= ..\wperl.exe
+GLOBEXE		= ..\perlglob.exe
+CONFIGPM	= ..\lib\Config.pm
+MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
+X2P		= ..\x2p\a2p.exe
+
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP = perldll.def
+
+
+PL2BAT		= bin\pl2bat.pl
+GLOBBAT		= bin\perlglob.bat
+
+UTILS		=			\
+		..\utils\h2ph		\
+		..\utils\splain		\
+		..\utils\dprofpp	\
+		..\utils\perlbug	\
+		..\utils\pl2pm 		\
+		..\utils\c2ph		\
+		..\utils\h2xs		\
+		..\utils\perldoc	\
+		..\utils\perlcc		\
+		..\utils\perlivp	\
+		..\utils\libnetcfg	\
+		..\pod\checkpods	\
+		..\pod\pod2html		\
+		..\pod\pod2latex	\
+		..\pod\pod2man		\
+		..\pod\pod2text		\
+		..\pod\pod2usage	\
+		..\pod\podchecker	\
+		..\pod\podselect	\
+		..\x2p\find2perl	\
+		..\x2p\s2p		\
+		..\lib\ExtUtils\xsubpp	\
+		bin\exetype.pl		\
+		bin\runperl.pl		\
+		bin\pl2bat.pl		\
+		bin\perlglob.pl		\
+		bin\search.pl
+
+.IF "$(CCTYPE)" == "BORLAND"
+
+CFGSH_TMPL	= config.bc
+CFGH_TMPL	= config_H.bc
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CFGSH_TMPL	= config.gc
+CFGH_TMPL	= config_H.gc
+PERLIMPLIB	= ..\libperl57$(a)
+
+.ELSE
+
+CFGSH_TMPL	= config.vc
+CFGH_TMPL	= config_H.vc
+
+.ENDIF
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+# XXX so why did we change it from perl56 to perl57?
+PERLIMPLIB	*= ..\perl57$(a)
+PERLDLL		= ..\perl57.dll
+
+XCOPY		= xcopy /f /r /i /d
+RCOPY		= xcopy /f /r /i /e /d
+NOOP		= @echo
+
+#
+# filenames given to xsubpp must have forward slashes (since it puts
+# full pathnames in #line strings)
+XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+		-C++ -prototypes
+
+MICROCORE_SRC	=		\
+		..\av.c		\
+		..\deb.c	\
+		..\doio.c	\
+		..\doop.c	\
+		..\dump.c	\
+		..\globals.c	\
+		..\gv.c		\
+		..\hv.c		\
+		..\locale.c	\
+		..\mg.c		\
+		..\numeric.c	\
+		..\op.c		\
+		..\perl.c	\
+		..\perlapi.c	\
+		..\perly.c	\
+		..\pp.c		\
+		..\pp_ctl.c	\
+		..\pp_hot.c	\
+		..\pp_pack.c	\
+		..\pp_sys.c	\
+		..\regcomp.c	\
+		..\regexec.c	\
+		..\run.c	\
+		..\scope.c	\
+		..\sv.c		\
+		..\taint.c	\
+		..\toke.c	\
+		..\universal.c	\
+		..\utf8.c	\
+		..\util.c	\
+		..\xsutils.c
+
+EXTRACORE_SRC	+= perllib.c
+
+.IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC	+= ..\malloc.c
+.ENDIF
+
+.IF "$(USE_OBJECT)" != "define"
+EXTRACORE_SRC	+= ..\perlio.c
+.ENDIF
+
+WIN32_SRC	=		\
+		.\win32.c	\
+		.\win32io.c	\
+		.\win32sck.c	\
+		.\win32thread.c
+
+.IF "$(CRYPT_SRC)" != ""
+WIN32_SRC	+= .\$(CRYPT_SRC)
+.ENDIF
+
+DLL_SRC		= $(DYNALOADER).c
+
+X2P_SRC		=		\
+		..\x2p\a2p.c	\
+		..\x2p\hash.c	\
+		..\x2p\str.c	\
+		..\x2p\util.c	\
+		..\x2p\walk.c
+
+CORE_NOCFG_H	=		\
+		..\av.h		\
+		..\cop.h	\
+		..\cv.h		\
+		..\dosish.h	\
+		..\embed.h	\
+		..\form.h	\
+		..\gv.h		\
+		..\handy.h	\
+		..\hv.h		\
+		..\iperlsys.h	\
+		..\mg.h		\
+		..\nostdio.h	\
+		..\op.h		\
+		..\opcode.h	\
+		..\perl.h	\
+		..\perlapi.h	\
+		..\perlsdio.h	\
+		..\perlsfio.h	\
+		..\perly.h	\
+		..\pp.h		\
+		..\proto.h	\
+		..\regexp.h	\
+		..\scope.h	\
+		..\sv.h		\
+		..\thread.h	\
+		..\unixish.h	\
+		..\utf8.h	\
+		..\util.h	\
+		..\warnings.h	\
+		..\XSUB.h	\
+		..\EXTERN.h	\
+		..\perlvars.h	\
+		..\intrpvar.h	\
+		..\thrdvar.h	\
+		.\include\dirent.h	\
+		.\include\netdb.h	\
+		.\include\sys\socket.h	\
+		.\win32.h
+
+CORE_H		= $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ	= $(MICROCORE_SRC:db:+$(o))
+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
+WIN32_OBJ	= $(WIN32_SRC:db:+$(o))
+MINICORE_OBJ	= $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
+MINIWIN32_OBJ	= $(MINIDIR)\{$(WIN32_OBJ:f)}
+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ		= $(DLL_SRC:db:+$(o))
+X2P_OBJ		= $(X2P_SRC:db:+$(o))
+
+PERLDLL_OBJ	= $(CORE_OBJ)
+PERLEXE_OBJ	= perlmain$(o)
+
+PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)
+
+.IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ	= setargv$(o)
+.ENDIF
+
+DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
+		Sys/Hostname Storable Filter/Util/Call Encode \
+		Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes
+STATIC_EXT	= DynaLoader
+NONXS_EXT	= Errno
+
+DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
+
+POD2HTML	= $(PODDIR)\pod2html
+POD2MAN		= $(PODDIR)\pod2man
+POD2LATEX	= $(PODDIR)\pod2latex
+POD2TEXT	= $(PODDIR)\pod2text
+
+# vars must be separated by "\t+~\t+", since we're using the tempfile
+# version of config_sh.pl (we were overflowing someone's buffer by
+# trying to fit them all on the command line)
+#	-- BKS 10-17-1999
+CFG_VARS	=					\
+		INST_DRV=$(INST_DRV)		~	\
+		INST_TOP=$(INST_TOP:s/\/\\/)	~	\
+		INST_VER=$(INST_VER:s/\/\\/)	~	\
+		INST_ARCH=$(INST_ARCH)		~	\
+		archname=$(ARCHNAME)		~	\
+		cc=$(CC)			~	\
+		ld=$(LINK32)			~	\
+		ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)	~	\
+		cf_email=$(EMAIL)		~	\
+		d_crypt=$(D_CRYPT)		~	\
+		d_mymalloc=$(PERL_MALLOC)	~	\
+		libs=$(LIBFILES:f)		~	\
+		incpath=$(CCINCDIR:s/\/\\/)	~	\
+		libperl=$(PERLIMPLIB:f)		~	\
+		libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)	~	\
+		libc=$(LIBC)			~	\
+		make=dmake			~	\
+		_o=$(o)	obj_ext=$(o)		~	\
+		_a=$(a)	lib_ext=$(a)		~	\
+		static_ext=$(STATIC_EXT)	~	\
+		use5005threads=$(USE_5005THREADS)	~	\
+		useithreads=$(USE_ITHREADS)	~	\
+		usethreads=$(USE_5005THREADS)	~	\
+		usemultiplicity=$(USE_MULTI)	~	\
+		useperlio=$(USE_PERLIO)		~	\
+		LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)		~	\
+		optimize=$(OPTIMIZE)
+
+#
+# set up targets varying between Win95 and WinNT builds
+#
+
+.IF "$(IS_WIN95)" == "define"
+MK2 		= .\makefile.95
+RIGHTMAKE	= __switch_makefiles
+NOOP		= @rem
+.ELSE
+MK2		= __not_needed
+RIGHTMAKE	=
+.ENDIF
+
+#
+# Top targets
+#
+
+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)		\
+	$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)	\
+	$(X2P) Extensions 
+
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+
+#----------------------------------------------------------------
+
+#-------------------- BEGIN Win95 SPECIFIC ----------------------
+
+# this target is a jump-off point for Win95
+#  1. it switches to the Win95-specific makefile if it exists
+#     (__do_switch_makefiles)
+#  2. it prints a message when the Win95-specific one finishes (__done)
+#  3. it then kills this makefile by trying to make __no_such_target
+
+__switch_makefiles: __do_switch_makefiles __done __no_such_target
+
+__do_switch_makefiles:
+.IF "$(NOTFIRST)" != "true"
+	if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
+.ELSE
+	$(NOOP)
+.ENDIF
+
+.IF "$(NOTFIRST)" != "true"
+__done:
+	@echo Build process complete. Ignore any errors after this message.
+	@echo Run "dmake test" to test and "dmake install" to install
+
+.ELSE
+# dummy targets for Win95-specific makefile
+
+__done:
+	$(NOOP)
+
+__no_such_target:
+	$(NOOP)
+
+.ENDIF
+
+# This target is used to generate the new makefile (.\makefile.95) for Win95
+
+.\makefile.95: .\makefile.mk
+	$(MINIPERL) genmk95.pl makefile.mk $(MK2)
+
+#--------------------- END Win95 SPECIFIC ---------------------
+
+# a blank target for when builds don't need to do certain things
+# this target added for Win95 port but used to keep the WinNT port able to
+# use this file
+__not_needed:
+	$(NOOP)
+
+$(GLOBEXE) : perlglob$(o)
+.IF "$(CCTYPE)" == "BORLAND"
+	$(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
+	    "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
+.ELIF "$(CCTYPE)" == "GCC"
+	$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
+.ELSE
+	$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+	    perlglob$(o) setargv$(o)
+.ENDIF
+
+perlglob$(o)  : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+	copy $(CFGSH_TMPL) config.w32
+
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
+	-del /f config.h
+	copy $(CFGH_TMPL) config.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
+	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
+	    $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+	perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
+	    $(CFGSH_TMPL) > ..\config.sh
+	-cd .. && del /f perl.exe
+	cd .. && perl configpm
+	-del /f $(CFGH_TMPL)
+	-mkdir $(COREDIR)
+	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+	rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
+	cd .. && miniperl configpm
+	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(XCOPY) *.h $(COREDIR)\*.*
+	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+	$(RCOPY) include $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
+.IF "$(CCTYPE)" == "BORLAND"
+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+	    @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+	$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
+	    $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+.ELSE
+	$(LINK32) -subsystem:console -out:$@ \
+	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
+.ENDIF
+
+$(MINIDIR) :
+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
+# unless the .IF is true), so instead we use a .ELSE with the default.
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+
+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
+.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+.ELSE
+	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+.ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ)	: $(CORE_NOCFG_H)
+
+$(WIN32_OBJ)	: $(CORE_H)
+$(CORE_OBJ)	: $(CORE_H)
+$(DLL_OBJ)	: $(CORE_H)
+$(X2P_OBJ)	: $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
+	$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+.IF "$(CCTYPE)" == "BORLAND"
+	$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
+	    @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
+		$@,\n \
+		$(LIBFILES)\n \
+		perldll.def\n)
+	$(IMPLIB) $*.lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
+	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+	dlltool --output-lib $(PERLIMPLIB) \
+		--dllname $(PERLDLL:b).dll \
+		--def perldll.def \
+		--base-file perl.base \
+		--output-exp perl.exp
+	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
+	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
+		perl.exp $(LKPOST))
+.ELSE
+	$(LINK32) -dll -def:perldll.def -out:$@ \
+	    @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
+	        $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
+.ENDIF
+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl
+	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+	$(MINIPERL) ..\x2p\find2perl.PL
+	$(MINIPERL) ..\x2p\s2p.PL
+.IF "$(CCTYPE)" == "BORLAND"
+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+	    @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+	$(LINK32) -v -o $@ $(BLINK_FLAGS) \
+	    $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+.ELSE
+	$(LINK32) -subsystem:console -out:$@ \
+	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+.ENDIF
+
+perlmain.c : runperl.c
+	copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+.IF "$(CCTYPE)" == "BORLAND"
+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+	    @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
+	    $(@:s,\,\\),\n \
+	    $(PERLIMPLIB) $(LIBFILES)\n)
+.ELIF "$(CCTYPE)" == "GCC"
+	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \
+	    $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
+.ELSE
+	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+.ENDIF
+	copy $(PERLEXE) $(WPERLEXE)
+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+	copy splittree.pl ..
+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
+	if not exist $(AUTODIR) mkdir $(AUTODIR)
+	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
+	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
+	cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
+	$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
+
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+
+#----------------------------------------------------------------------------------
+Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) 
+	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+
+Extensions_clean : 
+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+
+#----------------------------------------------------------------------------------
+
+
+doc: $(PERLEXE)
+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
+	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+
+utils: $(PERLEXE) $(X2P)
+	cd ..\utils && $(MAKE) PERL=$(MINIPERL)
+	copy ..\README.aix	..\pod\perlaix.pod
+	copy ..\README.amiga	..\pod\perlamiga.pod
+	copy ..\README.apollo	..\pod\perlapollo.pod
+	copy ..\README.beos	..\pod\perlbeos.pod
+	copy ..\README.bs2000	..\pod\perlbs2000.pod
+	copy ..\README.ce	..\pod\perlce.pod
+	copy ..\README.cygwin	..\pod\perlcygwin.pod
+	copy ..\README.dgux	..\pod\perldgux.pod
+	copy ..\README.dos	..\pod\perldos.pod
+	copy ..\README.epoc	..\pod\perlepoc.pod
+	copy ..\README.hpux	..\pod\perlhpux.pod
+	copy ..\README.hurd	..\pod\perlhurd.pod
+	copy ..\README.machten	..\pod\perlmachten.pod
+	copy ..\README.macos	..\pod\perlmacos.pod
+	copy ..\README.mint	..\pod\perlmint.pod
+	copy ..\README.mpeix	..\pod\perlmpeix.pod
+	copy ..\README.netware	..\pod\perlnetware.pod
+	copy ..\README.os2	..\pod\perlos2.pod
+	copy ..\README.os390	..\pod\perlos390.pod
+	copy ..\README.plan9	..\pod\perlplan9.pod
+	copy ..\README.qnx	..\pod\perlqnx.pod
+	copy ..\README.solaris	..\pod\perlsolaris.pod
+	copy ..\README.tru64	..\pod\perltru64.pod
+	copy ..\README.uts	..\pod\perluts.pod
+	copy ..\README.vmesa	..\pod\perlvmesa.pod
+	copy ..\vms\perlvms.pod	..\pod\perlvms.pod
+	copy ..\README.vos	..\pod\perlvos.pod
+	copy ..\README.win32	..\pod\perlwin32.pod
+	cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
+	cd ..\lib && $(PERLEXE) lib_pm.PL
+	$(PERLEXE) $(PL2BAT) $(UTILS)
+
+distclean: clean
+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+		$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
+	-del /f *.def *.map
+	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+	-del /f $(LIBDIR)\XSLoader.pm
+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+	-del /f $(LIBDIR)\PerlIO\Scalar.pm
+	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+	-del /f $(LIBDIR)\File\Glob.pm
+	-del /f $(LIBDIR)\Storable.pm
+	-del /f $(LIBDIR)\Filter\Util\Call.pm
+	-del /f $(LIBDIR)\Digest\MD5.pm
+	-del /f $(LIBDIR)\MIME\Base64.pm
+	-del /f $(LIBDIR)\MIME\QuotedPrint.pm
+	-del /f $(LIBDIR)\Time\HiRes.pm
+	-del /f $(LIBDIR)\List\Util.pm
+	-del /f $(LIBDIR)\Scalar\Util.pm
+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
+	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
+	-if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
+	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
+	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
+	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
+	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
+	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
+	-cd $(PODDIR) && del /f *.html *.bat checkpods \
+	    perlaix.pod perlamiga.pod perlapollo.pod \
+	    perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
+	    perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
+	    perlmachten.pod perlmint.pod \
+	    perlmacos.pod perlmpeix.pod perlnetware.pod \
+	    perlos2.pod perlos390.pod \
+	    perlplan9.pod perlqnx.pod \
+	    perlsolaris.pod perltru64.pod perluts.pod \
+	    perlvmesa.pod perlvms.pod perlvos.pod \
+	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+	    podchecker podselect
+	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
+	    perlivp dprofpp *.bat
+	-cd ..\x2p && del /f find2perl s2p *.bat
+	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+	-del /f $(CONFIGPM)
+	-del /f bin\*.bat
+	-cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
+	    pm_to_blib
+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
+	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : $(RIGHTMAKE) utils
+	$(PERLEXE) ..\installperl
+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+	$(RCOPY) html\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+	copy splittree.pl ..
+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+	$(RCOPY) ..\lib $(INST_LIB)\*.*
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+	$(XCOPY) $(MINIPERL) ..\t\perl.exe
+.IF "$(CCTYPE)" == "BORLAND"
+	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+	attrib -r ..\t\*.*
+	copy test ..\t
+	cd ..\t && \
+	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+
+test-prep : all utils
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+.IF "$(CCTYPE)" == "BORLAND"
+	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+
+test : $(RIGHTMAKE) test-prep
+	cd ..\t && $(PERLEXE) -I..\lib harness
+
+test-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1 && \
+	    cd ..\t && $(PERLEXE) -I.\lib harness
+
+test-wide : test-prep
+	set HARNESS_PERL_SWITCHES=-C && \
+	    cd ..\t && $(PERLEXE) -I..\lib harness
+
+test-wide-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1 && \
+	    set HARNESS_PERL_SWITCHES=-C && \
+	    cd ..\t && $(PERLEXE) -I..\lib harness
+
+clean : Extensions_clean
+	-@erase miniperlmain$(o)
+	-@erase $(MINIPERL)
+	-@erase perlglob$(o)
+	-@erase perlmain$(o)
+	-@erase config.w32
+	-@erase /f config.h
+	-@erase $(GLOBEXE)
+	-@erase $(PERLEXE)
+	-@erase $(WPERLEXE)
+	-@erase $(PERLDLL)
+	-@erase $(CORE_OBJ)
+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
+	-@erase $(WIN32_OBJ)
+	-@erase $(DLL_OBJ)
+	-@erase $(X2P_OBJ)
+	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
+	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+	-@erase ..\x2p\*.exe ..\x2p\*.bat
+	-@erase *.ilk
+	-@erase *.pdb
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "dmake nok" instead.
+ok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok