Rename use64bits to use64bitint;

rename usefull64bits to use64bitall.

p4raw-id: //depot/cfgperl@5261

30 files changed, 2530 insertions, 2132 deletions

diff --git a/Configure b/Configure
index 5de329572c..0abed23af4 100755
--- a/Configure
+++ b/Configure
@@ -20,7 +20,7 @@
 
 # $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
 #
-# Generated on Sat Feb 26 00:48:15 EET 2000 [metaconfig 3.0 PL70]
+# Generated on Sat Feb 26 04:42:42 EET 2000 [metaconfig 3.0 PL70]
 # (with additional metaconfig patches by perlbug@perl.com)
 
 cat >/tmp/c1$$ <<EOF
@@ -883,8 +883,8 @@ uidsign=''
 uidsize=''
 uidtype=''
 archname64=''
-use64bits=''
-usefull64bits=''
+use64bitall=''
+use64bitint=''
 uselargefiles=''
 uselongdouble=''
 usemorebits=''
@@ -4292,6 +4292,18 @@ fi
 
 
 
+# Backward compatibility (uselfs is deprecated).
+case "$uselfs" in
+"$define"|true|[yY]*)
+	cat <<EOM >&4
+
+*** Configure -Duselfs is deprecated, using -Duselargefiles instead.
+
+EOM
+	uselargefiles="$define"
+	;;
+esac                          
+
 case "$lseeksize:$fpossize" in
 8:8) cat <<EOM
 
@@ -4391,7 +4403,7 @@ esac
 
 case "$usemorebits" in
 "$define"|true|[yY]*)
-	use64bits="$define"
+	use64bitint="$define"
 	uselongdouble="$define"
 	usemorebits="$define"
 	;;
@@ -4405,17 +4417,40 @@ case "$uselonglong" in
 "$define"|true|[yY]*)
 	cat <<EOM >&4
 
-*** Configure -Duselonglong is deprecated, using the -Duse64bits instead.
+*** Configure -Duselonglong is deprecated, using -Duse64bitint instead.
+
+EOM
+	use64bitint="$define"
+	;;
+esac                          
+# Backward compatibility (use64bits is deprecated).
+case "$use64bits" in
+"$define"|true|[yY]*)
+	cat <<EOM >&4
+
+*** Configure -Duse64bits is deprecated, using -Duse64bitint instead.
 
 EOM
-	use64bits="$define"
+	use64bitint="$define"
 	;;
 esac                          
+# Thinko compatibility
+case "$use64bitints" in
+"$define"|true|[yY]*)
+	cat <<EOM >&4
+
+*** There is no Configure -Duse64bitints, using -Duse64bitint instead.
+
+EOM
+	use64bitint="$define"
+	;;
+esac                          
+
 case "$ccflags" in
-*-DUSE_LONG_LONG*|*-DUSE_64_BITS*|*-DUSE_FULL_64_BITS*) use64bits="$define";;
+*-DUSE_LONG_LONG*|*-DUSE_64_BIT_INT*|*-DUSE_64_BIT_ALL*) use64bitint="$define";;
 esac
-case "$usefull64bits" in
-"$define"|true|[yY]*) use64bits="$define" ;;
+case "$use64bitall" in
+"$define"|true|[yY]*) use64bitint="$define" ;;
 esac
 
 case "$longsize" in
@@ -4425,14 +4460,14 @@ You have natively 64-bit long integers.
 EOM
    val="$define"
    ;;
-*) case "$use64bits" in
+*) case "$use64bitint" in
    "$define"|true|[yY]*) dflt='y';;
    *) dflt='n';;
    esac
    cat <<EOM
 
 Perl can be built to take advantage of 64-bit integer types
-on some systems.  To do so, Configure can be run with -Duse64bits.
+on some systems.  To do so, Configure can be run with -Duse64bitint.
 Choosing this option will most probably introduce binary incompatibilities.
 
 If this doesn't make any sense to you, just accept the default '$dflt'.
@@ -4445,12 +4480,12 @@ EOM
    esac
    ;;
 esac
-set use64bits
+set use64bitint
 eval $setvar
 
-case "$usefull64bits" in
+case "$use64bitall" in
 "$define"|true|[yY]*) val="$define" ;;
-*)	case "$use64bits" in
+*)	case "$use64bitint" in
 	"$define")	case "$longsize" in
 			4)	dflt='n'
 				cat <<EOM
@@ -4479,47 +4514,47 @@ EOM
 	esac
 	;;
 esac 
-set usefull64bits
+set use64bitall
 eval $setvar
 
-case "$use64bits" in
+case "$use64bitint" in
 "$define"|true|[yY]*)
 : Look for a hint-file generated 'call-back-unit'.  If the
 : user has specified that a 64-bit perl is to be built,
 : we may need to set or change some other defaults.
-	if $test -f use64bits.cbu; then
+	if $test -f use64bitint.cbu; then
 		echo "Your platform has some specific hints for 64-bit builds, using them..."
-		. ./use64bits.cbu
+		. ./use64bitint.cbu
 	fi
 	case "$longsize" in
 	4) case "$ccflags" in
-	   *-DUSE_64_BITS*) ;;
-	   *) ccflags="$ccflags -DUSE_64_BITS";;
+	   *-DUSE_64_BIT_INT*) ;;
+	   *) ccflags="$ccflags -DUSE_64_BIT_INT";;
 	   esac
 	   case "$archname64" in
-	   '') archname64=64 ;;
+	   '') archname64=64int ;;
 	   esac
 	   ;;
 	esac
 	;;
 esac
 
-case "$usefull64bits" in
+case "$use64bitall" in
 "$define"|true|[yY]*)
 : Look for a hint-file generated 'call-back-unit'.  If the
 : user has specified that a full 64-bit perl is to be built,
 : we may need to set or change some other defaults.
-	if $test -f usefull64bits.cbu; then
+	if $test -f use64bitall.cbu; then
 		echo "Your platform has some specific hints for full 64-bit builds, using them..."
-		. ./usefull64bits.cbu
+		. ./use64bitall.cbu
 	fi
 	case "$longsize" in
 	4) case "$ccflags" in
-	   *-DUSE_FULL_64_BITS*) ;;
-      	   *) ccflags="$ccflags -DUSE_FULL_64_BITS";;
+	   *-DUSE_64_BIT_ALL*) ;;
+      	   *) ccflags="$ccflags -DUSE_64_BIT_ALL";;
 	   esac
 	   case "$archname64" in
-	   ''|64) archname64=full64 ;;
+	   ''|64) archname64=64all ;;
 	   esac
 	   ;;
 	esac
@@ -4580,7 +4615,7 @@ $define)
         esac
 	;;
 esac
-case "$use64bits" in
+case "$use64bitint" in
 $define)
 	case "$archname64" in
 	'')
@@ -9760,7 +9795,7 @@ case "$quadtype" in
 '')	echo "Alas, no 64-bit integer types in sight." >&4
 	d_quad="$undef"
 	;;
-*)	if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
+*)	if test X"$use64bitint" = Xdefine -o X"$longsize" = X8; then
 	    verb="will"
 	else
 	    verb="could"
@@ -9804,7 +9839,7 @@ $rm -f try.c try
 echo " "
 $echo "Choosing the C types to be used for Perl's internal types..." >&4
 
-case "$use64bits:$d_quad:$quadtype" in
+case "$use64bitint:$d_quad:$quadtype" in
 define:define:?*)
 	ivtype="$quadtype"
 	uvtype="$uquadtype"
@@ -13525,7 +13560,7 @@ EOM
 		'')	try="extern int accept(int, struct sockaddr *, $xxx *);"
 			if ./protochk "$try" $hdrs; then
 				echo "Your system accepts '$xxx *' for the last argument of accept()."
-				socksizetype="$xxx *"
+				socksizetype="$xxx"
 			fi
 			;;
 		esac
@@ -13533,13 +13568,13 @@ EOM
 : In case none of those worked, prompt the user.
 	case "$socksizetype" in
 	'')	rp='What is the type for the last argument to accept()?'
-		dflt='int *'
+		dflt='int'
 		. ./myread
 		socksizetype=$ans
 		;;
 	esac
 	;;
-*)	: no gethostbyaddr, so pick relatively harmless defaults
+*)	: no sockets, so pick relatively harmless defaults
 	socksizetype='char *'
 	;;
 esac
@@ -14438,7 +14473,7 @@ for xxx in $known_extensions ; do
 	NDBM_File|ndbm_fil)
 		case "$i_ndbm" in
 		$define)
-		    case "$osname-$use64bits" in
+		    case "$osname-$use64bitint" in
 		    hpux-define)
 			case "$libs" in
 			*-lndbm*) avail_ext="$avail_ext $xxx" ;;
@@ -14452,7 +14487,7 @@ for xxx in $known_extensions ; do
 	ODBM_File|odbm_fil) 
 		case "${i_dbm}${i_rpcsvcdbm}" in
 		*"${define}"*)
-		    case "$osname-$use64bits" in
+		    case "$osname-$use64bitint" in
 		    hpux-define)
 			case "$libs" in
 			*-ldbm*) avail_ext="$avail_ext $xxx" ;;
@@ -15409,9 +15444,9 @@ uname='$uname'
 uniq='$uniq'
 uquadtype='$uquadtype'
 use5005threads='$use5005threads'
-use64bits='$use64bits'
+use64bitall='$use64bitall'
+use64bitint='$use64bitint'
 usedl='$usedl'
-usefull64bits='$usefull64bits'
 useithreads='$useithreads'
 uselargefiles='$uselargefiles'
 uselongdouble='$uselongdouble'
diff --git a/Porting/Glossary b/Porting/Glossary
index 296bd24b5f..71d97f8ea9 100644
--- a/Porting/Glossary
+++ b/Porting/Glossary
@@ -3358,8 +3358,18 @@ use5005threads (usethreads.U):
 	and indicates that Perl should be built to use the 5.005-based
 	threading implementation.
 
-use64bits (use64bits.U):
-	This variable conditionally defines the USE_64_BITS symbol,
+use64bitall (use64bits.U):
+	This variable conditionally defines the USE_64_BIT_ALL symbol,
+	and indicates that 64-bit integer types should be used
+	when available.  The maximal possible
+	64-bitness is employed: LP64 or ILP64, meaning that you will
+	be able to use more than 2 gigabytes of memory.  This mode is
+	even more binary incompatible than USE_64_BIT_INT. You may not
+	be able to run the resulting executable in a 32-bit CPU at all or
+	you may need at least to reboot your OS to 64-bit mode.
+
+use64bitint (use64bits.U):
+	This variable conditionally defines the USE_64_BIT_INT symbol,
 	and indicates that 64-bit integer types should be used
 	when available.  The minimal possible 64-bitness
 	is employed, just enough to get 64-bit integers into Perl.
@@ -3370,16 +3380,6 @@ usedl (dlsrc.U):
 	This variable indicates if the system supports dynamic
 	loading of some sort.  See also dlsrc and dlobj.
 
-usefull64bits (use64bits.U):
-	This variable conditionally defines the USE_FULL_64_BITS symbol,
-	and indicates that 64-bit integer types should be used
-	when available.  The maximal possible
-	64-bitness is employed: LP64 or ILP64, meaning that you will
-	be able to use more than 2 gigabytes of memory.  This mode is
-	even more binary incompatible than USE_64_BITS. You may not
-	be able to run the resulting executable in a 32-bit CPU at all or
-	you may need at least to reboot your OS to 64-bit mode.
-
 useithreads (usethreads.U):
 	This variable conditionally defines the USE_ITHREADS symbol,
 	and indicates that Perl should be built to use the interpreter-based
diff --git a/Porting/config.sh b/Porting/config.sh
index ed01b7edf2..9476ce0684 100644
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -8,7 +8,7 @@
 
 # Package name      : perl5
 # Source directory  : .
-# Configuration time: Sat Feb 26 00:49:19 EET 2000
+# Configuration time: Sat Feb 26 03:04:10 EET 2000
 # Configured by     : jhi
 # Target system     : osf1 alpha.hut.fi v4.0 878 alpha 
 
@@ -59,7 +59,7 @@ ccflags='-pthread -std -DLANGUAGE_C'
 ccsymbols='__alpha=1 __LANGUAGE_C__=1 __osf__=1 __unix__=1 _LONGLONG=1 _SYSTYPE_BSD=1 SYSTYPE_BSD=1 unix=1'
 cf_by='jhi'
 cf_email='yourname@yourhost.yourplace.com'
-cf_time='Sat Feb 26 00:49:19 EET 2000'
+cf_time='Sat Feb 26 03:04:10 EET 2000'
 charsize='1'
 chgrp=''
 chmod=''
@@ -682,7 +682,7 @@ small=''
 so='so'
 sockethdr=''
 socketlib=''
-socksizetype='int *'
+socksizetype='int'
 sort='sort'
 spackage='Perl5'
 spitshell='cat'
@@ -730,9 +730,9 @@ uname='uname'
 uniq='uniq'
 uquadtype='unsigned long'
 use5005threads='undef'
-use64bits='define'
+use64bitall='define'
+use64bitint='define'
 usedl='define'
-usefull64bits='define'
 useithreads='define'
 uselargefiles='define'
 uselongdouble='undef'
@@ -771,12 +771,12 @@ zcat=''
 zip='zip'
 # Configure command line arguments.
 config_arg0='Configure'
-config_args='-Dprefix=/opt/perl -Doptimize=-O -Dusethreads -Duse64bits -Duselfs -Dcf_by=yourname -Dcf_email=yourname@yourhost.yourplace.com -Dperladmin=yourname@yourhost.yourplace.com -Dmydomain=.yourplace.com -Dmyhostname=yourhost -dE'
+config_args='-Dprefix=/opt/perl -Doptimize=-O -Dusethreads -Duse64bitint -Duselfs -Dcf_by=yourname -Dcf_email=yourname@yourhost.yourplace.com -Dperladmin=yourname@yourhost.yourplace.com -Dmydomain=.yourplace.com -Dmyhostname=yourhost -dE'
 config_argc=11
 config_arg1='-Dprefix=/opt/perl'
 config_arg2='-Doptimize=-O'
 config_arg3='-Dusethreads'
-config_arg4='-Duse64bits'
+config_arg4='-Duse64bitint'
 config_arg5='-Duselfs'
 config_arg6='-Dcf_by=yourname'
 config_arg7='-Dcf_email=yourname@yourhost.yourplace.com'
diff --git a/Porting/config_H b/Porting/config_H
index 5a3e2c572f..e34e1f38ac 100644
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -17,7 +17,7 @@
 /*
  * Package name      : perl5
  * Source directory  : .
- * Configuration time: Sat Feb 26 00:49:19 EET 2000
+ * Configuration time: Sat Feb 26 03:04:10 EET 2000
  * Configured by     : jhi
  * Target system     : osf1 alpha.hut.fi v4.0 878 alpha 
  */
@@ -2836,7 +2836,7 @@
  */
 #define Uid_t uid_t		/* UID type */
 
-/* USE_64_BITS:
+/* USE_64_BIT_INT:
  *	This symbol, if defined, indicates that 64-bit integers should
  *	be used when available.  If not defined, the native integers
  *	will be employed (be they 32 or 64 bits).  The minimal possible
@@ -2844,12 +2844,22 @@
  *	This may mean using for example "long longs", while your memory
  *	may still be limited to 2 gigabytes.
  */
-#ifndef USE_64_BITS
-#define	USE_64_BITS		/**/
+/* USE_64_BIT_ALL:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be used (be they 32 or 64 bits).  The maximal possible
+ *	64-bitness is employed: LP64 or ILP64, meaning that you will
+ *	be able to use more than 2 gigabytes of memory.  This mode is
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
+ *	be able to run the resulting executable in a 32-bit CPU at all or
+ *	you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+#define	USE_64_BIT_INT		/**/
 #endif
 
-#ifndef USE_FULL_64_BITS
-#define	USE_FULL_64_BITS		/**/
+#ifndef USE_64_BIT_ALL
+#define	USE_64_BIT_ALL		/**/
 #endif
 
 /* USE_LARGE_FILES:
@@ -3001,9 +3011,9 @@
 #define	HAS_LSEEK_PROTO	/**/
 
 /* Sock_size_t:
- *	This symbol holds the type used for the size argument
- *	of various socket calls.
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
-#define Sock_size_t		int * /**/
+#define Sock_size_t		int /**/
 
 #endif
diff --git a/config_h.SH b/config_h.SH
index 0e0e525597..ad136f26db 100644
--- a/config_h.SH
+++ b/config_h.SH
@@ -2850,7 +2850,7 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define Uid_t $uidtype		/* UID type */
 
-/* USE_64_BITS:
+/* USE_64_BIT_INT:
  *	This symbol, if defined, indicates that 64-bit integers should
  *	be used when available.  If not defined, the native integers
  *	will be employed (be they 32 or 64 bits).  The minimal possible
@@ -2858,12 +2858,22 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  *	This may mean using for example "long longs", while your memory
  *	may still be limited to 2 gigabytes.
  */
-#ifndef USE_64_BITS
-#$use64bits	USE_64_BITS		/**/
+/* USE_64_BIT_ALL:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be used (be they 32 or 64 bits).  The maximal possible
+ *	64-bitness is employed: LP64 or ILP64, meaning that you will
+ *	be able to use more than 2 gigabytes of memory.  This mode is
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
+ *	be able to run the resulting executable in a 32-bit CPU at all or
+ *	you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+#$use64bitint	USE_64_BIT_INT		/**/
 #endif
 
-#ifndef USE_FULL_64_BITS
-#$usefull64bits	USE_FULL_64_BITS		/**/
+#ifndef USE_64_BIT_ALL
+#$use64bitall	USE_64_BIT_ALL		/**/
 #endif
 
 /* USE_LARGE_FILES:
@@ -3015,8 +3025,8 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_lseekproto	HAS_LSEEK_PROTO	/**/
 
 /* Sock_size_t:
- *	This symbol holds the type used for the size argument
- *	of various socket calls.
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
 #define Sock_size_t		$socksizetype /**/
 
diff --git a/configure.com b/configure.com
index c3f3b71855..813127ca4d 100644
--- a/configure.com
+++ b/configure.com
@@ -41,7 +41,7 @@ $ ans = ""
 $ macros = ""
 $ use_vmsdebug_perl = "N"
 $ use_debugging_perl = "Y"
-$ use_64bit = "n"
+$ use_64bitint = "n"
 $ C_Compiler_Replace = "CC="
 $ Thread_Live_Dangerously = "MT="
 $ use_two_pot_malloc = "N"
@@ -1746,15 +1746,15 @@ $   echo "64 bit integers and 128 bit floating point variables. This gives
 $   echo "a much larger range for perl's mathematical operations. (Note that
 $   echo "does *not* enable 64-bit fileops at the moment, as Dec C doesn't
 $   echo "do that yet)"
-$   dflt = use_64bit
-$   rp = "Build with 64 bits? [''dflt'] "
+$   dflt = use_64bitint
+$   rp = "Build with 64 bit integers and 128 bit floating point variable? [''dflt'] "
 $   GOSUB myread
 $   if ans.eqs."" then ans = dflt
 $   if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
 $   THEN
-$     use_64bit="Y"
+$     use_64bitint="Y"
 $   ELSE
-$     use_64bit="N"
+$     use_64bitint="N"
 $   ENDIF
 $ ENDIF
 $!
diff --git a/epoc/config.sh b/epoc/config.sh
index 59886ba627..0d6017f906 100644
--- a/epoc/config.sh
+++ b/epoc/config.sh
@@ -633,7 +633,7 @@ sleep=''
 smail=''
 small=''
 so=''
-sock_size_type='int *'
+socksizetype='int'
 sockethdr=''
 socketlib=''
 sort='sort'
@@ -671,9 +671,9 @@ uidsign='1'
 uidtype='uid_t'
 uname='uname'
 uniq='uniq'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
 usedl='undef'
-usefull64bits='undef'
 uselargefiles='undef'
 uselongdouble='undef'
 usemorebits='undef'
@@ -762,7 +762,6 @@ d_ustat='undef'
 i_sysstatfs='undef'
 i_sysvfs='undef'
 i_ustat='undef'
-use64bits='define'
 uidsize='2'
 gidsize='2'
 ivdformat='"ld"'
diff --git a/hints/aix.sh b/hints/aix.sh
index 4addec6e0c..1029a36aea 100644
--- a/hints/aix.sh
+++ b/hints/aix.sh
@@ -179,7 +179,7 @@ EOCBU
 # after it has prompted the user for whether to use large files.
 cat > UU/uselfs.cbu <<'EOCBU'
 case "$uselargefiles" in
-$define|true|[yY]*)
+''|$define|true|[yY]*)
 	lfcflags="`getconf XBS5_ILP32_OFFBIG_CFLAGS 2>/dev/null`"
 	lfldflags="`getconf XBS5_ILP32_OFFBIG_LDFLAGS 2>/dev/null`"
 	# _Somehow_ in AIX 4.3.1.0 the above getconf call manages to
@@ -208,10 +208,10 @@ $define|true|[yY]*)
 esac
 EOCBU
 
-# This script UU/use64bits.cbu will get 'called-back' by Configure 
+# This script UU/use64bitint.cbu will get 'called-back' by Configure 
 # after it has prompted the user for whether to use 64 bits.
-cat > UU/use64bits.cbu <<'EOCBU'
-case "$use64bits" in
+cat > UU/use64bitint.cbu <<'EOCBU'
+case "$use64bitint" in
 $define|true|[yY]*)
 	    case "`oslevel`" in
 	    3.*|4.[012].*)
diff --git a/hints/hpux.sh b/hints/hpux.sh
index ad213f2d99..ba6efa0341 100644
--- a/hints/hpux.sh
+++ b/hints/hpux.sh
@@ -133,7 +133,7 @@ else
 	selecttype='int *'
 fi
 
-case "$use64bits" in
+case "$use64bitint" in
 $define|true|[yY]*)
     if [ "$xxOsRevMajor" -lt 11 ]; then
 		cat <<EOM >&4
@@ -349,7 +349,7 @@ EOCBU
 # after it has prompted the user for whether to use 64 bits.
 cat > UU/uselfs.cbu <<'EOCBU'
 case "$uselargefiles" in
-$define|true|[yY]*)
+''|$define|true|[yY]*)
 	# there are largefile flags available via getconf(1)
 	# but we cheat for now.
 	ccflags="$ccflags -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
diff --git a/hints/irix_4.sh b/hints/irix_4.sh
index 1e90f989bd..5c5bdb2f0d 100644
--- a/hints/irix_4.sh
+++ b/hints/irix_4.sh
@@ -33,8 +33,8 @@ EOM
 	;;
 esac
 
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
 	cat >&4 <<EOM
 IRIX `uname -r` does not support 64-bit types.
 You should upgrade to at least IRIX 6.2.
diff --git a/hints/irix_5.sh b/hints/irix_5.sh
index 30f11d7676..f895bcc5f6 100644
--- a/hints/irix_5.sh
+++ b/hints/irix_5.sh
@@ -43,8 +43,8 @@ EOM
 	;;
 esac
 
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
 	cat >&4 <<EOM
 IRIX `uname -r` does not support 64-bit types.
 You should upgrade to at least IRIX 6.2.
diff --git a/hints/irix_6.sh b/hints/irix_6.sh
index 8dc3cba1d2..b512609280 100644
--- a/hints/irix_6.sh
+++ b/hints/irix_6.sh
@@ -233,10 +233,10 @@ EOCBU
 
 # The -n32 makes off_t to be 8 bytes, so we should have largefileness.
 
-# This script UU/use64bits.cbu will get 'called-back' by Configure 
+# This script UU/use64bitint.cbu will get 'called-back' by Configure 
 # after it has prompted the user for whether to use 64 bits.
-cat > UU/use64bits.cbu <<'EOCBU'
-case "$use64bits" in
+cat > UU/use64bitint.cbu <<'EOCBU'
+case "$use64bitint" in
 $define|true|[yY]*)
 	    case "`uname -r`" in
 	    [1-5]*|6.[01])
diff --git a/hints/irix_6_0.sh b/hints/irix_6_0.sh
index b34b3ecaff..50498af718 100644
--- a/hints/irix_6_0.sh
+++ b/hints/irix_6_0.sh
@@ -52,8 +52,8 @@ EOM
 	;;
 esac
 
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
 	cat >&4 <<EOM
 IRIX `uname -r` does not support 64-bit types.
 You should upgrade to at least IRIX 6.2.
diff --git a/hints/irix_6_1.sh b/hints/irix_6_1.sh
index 3359639818..50498af718 100644
--- a/hints/irix_6_1.sh
+++ b/hints/irix_6_1.sh
@@ -52,8 +52,8 @@ EOM
 	;;
 esac
 
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
 	cat >&4 <<EOM
 IRIX `uname -r` does not support 64-bit types.
 You should upgrade to at least IRIX 6.2.
@@ -61,3 +61,4 @@ Cannot continue, aborting.
 EOM
 	exit 1
 esac
+
diff --git a/hints/solaris_2.sh b/hints/solaris_2.sh
index dc11d82621..203257bee3 100644
--- a/hints/solaris_2.sh
+++ b/hints/solaris_2.sh
@@ -334,17 +334,17 @@ esac
 EOCBU
 
 case "$uselargefiles" in
-$define|true|[yY]*)
+''|$define|true|[yY]*)
     ccflags="$ccflags `getconf LFS_CFLAGS 2>/dev/null`"
     ldflags="$ldflags `getconf LFS_LDFLAGS 2>/dev/null`"
     libswanted="$libswanted `getconf LFS_LIBS 2>/dev/null|sed -e 's@^-l@@' -e 's@ -l@ @g`"
     ;;
 esac
 
-# This script UU/use64bits.cbu will get 'called-back' by Configure 
+# This script UU/use64bitint.cbu will get 'called-back' by Configure 
 # after it has prompted the user for whether to use 64 bits.
-cat > UU/use64bits.cbu <<'EOCBU'
-case "$use64bits" in
+cat > UU/use64bitint.cbu <<'EOCBU'
+case "$use64bitint" in
 $define|true|[yY]*)
 	    case "`uname -r`" in
 	    2.[1-6])
@@ -361,12 +361,8 @@ EOM
 esac
 EOCBU
 
-case "$usefull64bits" in
+case "$use64bitall" in
 $define|true|[yY]*)
-	    case "$ccflags" in
-	    *-DUSE_FULL_64_BITS*) ;;
-	    *) ccflags="$ccflags -DUSE_FULL_64_BITS" ;;
-	    esac
 	    ccflags="$ccflags `getconf XBS5_LP64_OFF64_CFLAGS`"
 	    ldflags="$ccflags `getconf XBS5_LP64_OFF64_LDFLAGS`"
 	    lddlflags="$lddlflags -G `getconf XBS5_LP64_OFF64_LDFLAGS`"
diff --git a/myconfig.SH b/myconfig.SH
index 1f93e6f2fc..7861f5e0ed 100644
--- a/myconfig.SH
+++ b/myconfig.SH
@@ -35,7 +35,7 @@ Summary of my $package (revision $baserev version $PERL_VERSION subversion $PERL
     hint=$hint, useposix=$useposix, d_sigaction=$d_sigaction
     usethreads=$usethreads use5005threads=$use5005threads useithreads=$useithreads usemultiplicity=$usemultiplicity
     useperlio=$useperlio d_sfio=$d_sfio uselargefiles=$uselargefiles 
-    use64bits=$use64bits uselongdouble=$uselongdouble usesocks=$usesocks
+    use64bitint=$use64bitint use64bitall=$use64bitall uselongdouble=$uselongdouble usesocks=$usesocks
   Compiler:
     cc='$cc', optimize='$optimize', gccversion=$gccversion
     cppflags='$cppflags'
diff --git a/perl.c b/perl.c
index 9c38c299ad..7e9f07a4f4 100644
--- a/perl.c
+++ b/perl.c
@@ -985,8 +985,11 @@ S_parse_body(pTHX_ char **env, XSINIT_t xsinit)
 #  ifdef USE_ITHREADS
 		sv_catpv(PL_Sv," USE_ITHREADS");
 #  endif
-#  ifdef USE_64_BITS
-		sv_catpv(PL_Sv," USE_64_BITS");
+#  ifdef USE_64_BIT_INT
+		sv_catpv(PL_Sv," USE_64_BIT_INT");
+#  endif
+#  ifdef USE_64_BIT_ALL
+		sv_catpv(PL_Sv," USE_64_BIT_ALL");
 #  endif
 #  ifdef USE_LONG_DOUBLE
 		sv_catpv(PL_Sv," USE_LONG_DOUBLE");
diff --git a/perl.h b/perl.h
index 73a67f4f2a..7d42b0f2a3 100644
--- a/perl.h
+++ b/perl.h
@@ -985,7 +985,7 @@ struct perl_mstats {
 typedef IVTYPE IV;
 typedef UVTYPE UV;
 
-#if defined(USE_64_BITS) && defined(HAS_QUAD)
+#if defined(USE_64_BIT_INT) && defined(HAS_QUAD)
 #  if QUADKIND == QUAD_IS_INT64_T && defined(INT64_MAX)
 #    define IV_MAX INT64_MAX
 #    define IV_MIN INT64_MIN
diff --git a/pod/perldelta.pod b/pod/perldelta.pod
index 90c81de852..9f24e12418 100644
--- a/pod/perldelta.pod
+++ b/pod/perldelta.pod
@@ -333,11 +333,15 @@ by running Configure with C<-Dflag>.
     usemultiplicity
     use5005threads
 
+    use64bitint		(equal to now deprecated 'use64bits')
+    use64bitall
+
     uselongdouble
     usemorebits
     uselargefiles
+    usesocks		(only SOCKS v5 supported)
 
-=head2 -Dusethreads and -Duse64bits now more daring
+=head2 Threadedness and 64-bitness now more daring
 
 The Configure options enabling the use of threads and the use of
 64-bitness are now more daring in the sense that they no more have an
@@ -345,7 +349,7 @@ explicit list of operating systems of known threads/64-bit
 capabilities.  In other words: if your operating system has the
 necessary APIs and datatypes, you should be able just to go ahead and
 use them, for threads by Configure -Dusethreads, and for 64 bits
-either explicitly by Configure -Duse64bits or implicitly if your
+either explicitly by Configure -Duse64bitint or implicitly if your
 system has 64 bit wide datatypes.  See also L<"64-bit support">.
 
 =head2 Long Doubles
@@ -356,7 +360,7 @@ Perl's scalars, use -Duselongdouble.
 
 =head2 -Dusemorebits
 
-You can enable both -Duse64bits and -Dlongdouble by -Dusemorebits.
+You can enable both -Duse64bitint and -Dlongdouble by -Dusemorebits.
 See also L<"64-bit support">.
 
 =head2 -Duselargefiles
@@ -634,8 +638,11 @@ filehandles that must be passed around, as in the following example:
 
 =head2 64-bit support
 
-All platforms that have 64-bit integers either (a) natively as longs
-or ints (b) via special compiler flags (c) using long long are able to
+	NOTE:	The Configure flags -Duselonglong and -Duse64bits
+		have been deprecated.  Use -Duse64bitint instead.
+
+Any platform that has 64-bit integers either (a) natively as longs or
+ints (b) via special compiler flags (c) using long long are able to
 use "quads" (64-integers) as follows:
 
 =over 4
@@ -671,7 +678,7 @@ vec() (but see the below note about bit arithmetics)
 =back
 
 Note that unless you have the case (a) you will have to configure
-and compile Perl using the -Duse64bits Configure flag.
+and compile Perl using the -Duse64bitint Configure flag.
 
 Unfortunately bit arithmetics (&, |, ^, ~, <<, >>) for numbers are not
 64-bit clean, they are explictly forced to be 32-bit because of
@@ -681,20 +688,20 @@ not limited in their width, you can use the & | ^ ~ operators on such
 scalars.
 
 There are actually two modes of 64-bitness: the first one is achieved
-using Configure -Duse64bits and the second one using Configure
--Dusefull64bits.  The difference is that the first one is minimal and
+using Configure -Duse64bitint and the second one using Configure
+-Duse64bitall.  The difference is that the first one is minimal and
 the second one maximal.  The first one does only as much as is
 required to get 64-bit integers into Perl (this may mean, for example,
 using "long longs") while your memory may still be limited to 2
 gigabytes (because your pointers most likely are 32-bit); the second
 one goes all the way by attempting to switch also longs (and pointers)
 being 64-bit.  This may create an even more binary incompatible Perl
-than -Duse64bits: the resulting executable may not run at all in a
+than -Duse64bitint: the resulting executable may not run at all in a
 CPU-bit box, or you may have to reboot/reconfigure/rebuild your
 operating system to be 64-bit aware.
 
-Natively 64-bit systems like Alpha and Cray need neither -Duse64bits
-nor -Dusefull64bits.
+Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint
+nor -Duse64bitall.
 
 Last but not least: note that due to Perl's habit of always using
 floating point numbers the quads are still not true integers.
diff --git a/pod/perlfunc.pod b/pod/perlfunc.pod
index d4215b63f4..f9b4a6bac3 100644
--- a/pod/perlfunc.pod
+++ b/pod/perlfunc.pod
@@ -4413,7 +4413,7 @@ For example
 You can find out whether your Perl supports quads via L<Config>:
 
 	use Config;
-	($Config{use64bits} eq 'define' || $Config{longsize} == 8) &&
+	($Config{use64bitint} eq 'define' || $Config{longsize} == 8) &&
 		print "quads\n";
 
 If Perl understands "long doubles" (this requires that the platform
diff --git a/vms/subconfigure.com b/vms/subconfigure.com
index c919c99a4a..dae2bdaf07 100644
--- a/vms/subconfigure.com
+++ b/vms/subconfigure.com
@@ -129,23 +129,23 @@ $ perl_d_sendmsg = "undef"
 $ perl_d_recvmsg = "undef"
 $ perl_d_msghdr_s = "undef"
 $ perl_d_cmsghdr_s = "undef"
-$ IF use_64bit .eqs. "Y"
+$ IF use_64bitint .eqs. "Y"
 $ THEN
-$   perl_use64bits = "define"
+$   perl_use64bitint = "define"
 $   perl_uselargefiles = "define"
 $   perl_uselongdouble = "define"
 $   perl_usemorebits = "define"
 $ ELSE
-$   perl_use64bits = "undef"
+$   perl_use64bitint = "undef"
 $   perl_uselargefiles = "undef"
 $   perl_uselongdouble = "undef"
 $   perl_usemorebits = "undef"
 $ ENDIF
-$ IF use_full64bit .eqs. "Y"
+$ IF use_64bitall .eqs. "Y"
 $ THEN
-$   perl_usefull64bits = "define"
+$   perl_use64bitall = "define"
 $ ELSE
-$   perl_usefull64bits = "undef"
+$   perl_use64bitall = "undef"
 $ ENDIF
 $ perl_d_drand48proto = "define"
 $ perl_d_lseekproto = "define"
@@ -439,7 +439,7 @@ $ perl_pager="most"
 $!
 $! Are we 64 bit?
 $!
-$ if (use_64bit .eqs. "Y")
+$ if (use_64bitint .eqs. "Y")
 $ THEN
 $   perl_d_PRIfldbl = "define"
 $   perl_d_PRIgldbl = "define"
@@ -4009,8 +4009,8 @@ $ WC "i_poll='" + perl_i_poll + "'"
 $ WC "i_inttypes='" + perl_i_inttypes + "'"
 $ WC "d_off64_t='" + perl_d_off64_t + "'"
 $ WC "d_fpos64_t='" + perl_d_fpos64_t + "'"
-$ WC "use64bits='" + perl_use64bits + "'"
-$ WC "usefull64bits='" + perl_usefull64bits + "'"
+$ WC "use64bitall='" + perl_use64bitall + "'"
+$ WC "use64bitint='" + perl_use64bitint + "'"
 $ WC "d_drand48proto='" + perl_d_drand48proto + "'"
 $ WC "d_lseekproto='" + perl_d_drand48proto + "'"
 $ WC "d_old_pthread_create_joinable='" + perl_d_old_pthread_create_joinable + "'"
@@ -4085,7 +4085,7 @@ $ WC "uselargefiles='" + perl_uselargefiles + "'"
 $ WC "uselongdouble='" + perl_uselongdouble + "'"
 $ WC "usemorebits='" + perl_usemorebits + "'"
 $ WC "d_quad='" + perl_d_quad + "'"
-$ if (use_64bit .eqs. "Y")
+$ if (use_64bitint .eqs. "Y")
 $ THEN
 $   WC "quadtype='" + perl_quadtype + "'" 
 $   WC "uquadtype='" + perl_uquadtype + "'" 
@@ -4204,14 +4204,14 @@ $    WRITE CONFIG "#define ALWAYS_DEFTYPES"
 $ ELSE
 $    WRITE CONFIG "#undef ALWAYS_DEFTYPES"
 $ ENDIF
-$ if use_64bit.eqs."Y"
+$ if use_64bitint.eqs."Y"
 $ THEN
-$    WRITE CONFIG "#define USE_64_BITS"
+$    WRITE CONFIG "#define USE_64_BIT_INT"
 $    WRITE CONFIG "#define USE_LONG_DOUBLE"
 $ ENDIF
-$ if use_full64bit.eqs."Y"
+$ if use_64bitall.eqs."Y"
 $ THEN
-$    WRITE CONFIG "#define USE_FULL_64_BITS"
+$    WRITE CONFIG "#define USE_64_BIT_ALL"
 $ ENDIF
 $ WRITE CONFIG "#define HAS_ENVGETENV"
 $ WRITE CONFIG "#define PERL_EXTERNAL_GLOB"
diff --git a/vos/config.def b/vos/config.def
index c7b320f87d..8f866218c4 100644
--- a/vos/config.def
+++ b/vos/config.def
@@ -404,7 +404,7 @@ $sitearchexp=''
 $sitelib='/system/ported/perl/lib/site/5.005'
 $sitelibexp='/system/ported/perl/lib/site/5.005'
 $sizetype='size_t'
-$sock_size_type='int *'
+$socksizetype='int'
 $sPRIfldbl='"Lf"'
 $sPRIgldbl='"Lg"'
 $src='%es#lang/vos_ftp_site/pub/vos/alpha/perl'
@@ -430,9 +430,9 @@ $uidsize='4'
 $uidtype='uid_t'
 $uquadtype='_error_'
 $use5005threads='undef'
-$use64bits='undef'
+$use64bitall='undef'
+$use64bitint='undef'
 $usedl='undef'
-$usefull64bits='undef'
 $uselargefiles='undef'
 $uselongdouble='define'
 $usemorebits='undef'
diff --git a/vos/config.h b/vos/config.h
index 51a7d2e404..2f4e15a820 100644
--- a/vos/config.h
+++ b/vos/config.h
@@ -358,6 +358,18 @@
  */
 #define HAS_MKTIME		/**/
 
+/* HAS_MSYNC:
+ *	This symbol, if defined, indicates that the msync system call is
+ *	available to synchronize a mapped file.
+ */
+/*#define HAS_MSYNC		/**/
+
+/* HAS_MUNMAP:
+ *	This symbol, if defined, indicates that the munmap system call is
+ *	available to unmap a region, usually mapped by mmap().
+ */
+/*#define HAS_MUNMAP		/**/
+
 /* HAS_NICE:
  *	This symbol, if defined, indicates that the nice routine is
  *	available.
@@ -980,6 +992,37 @@
  */
 #define STDCHAR unsigned char	/**/
 
+/* CROSSCOMPILE:
+ *	This symbol, if defined, signifies that we our
+ *	build process is a cross-compilation.
+ */
+/*#define CROSSCOMPILE		/**/
+
+/* INTSIZE:
+ *	This symbol contains the value of sizeof(int) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ *	This symbol contains the value of sizeof(long) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ *	This symbol contains the value of sizeof(short) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4		/**/
+#define LONGSIZE 4		/**/
+#define SHORTSIZE 2		/**/
+
+/* MULTIARCH:
+ *	This symbol, if defined, signifies that the build
+ *	process will produce some binary files that are going to be
+ *	used in a cross-platform environment.  This is the case for
+ *	example with the NeXT "fat" binaries that contain executables
+ *	for several CPUs.
+ */
+/*#define MULTIARCH		/**/
+
 /* HAS_QUAD:
  *	This symbol, if defined, tells that there's a 64-bit integer type,
  *	Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
@@ -1020,41 +1063,17 @@
  */
 /*#define   I_SYS_SECURITY	/**/
 
-/* CROSSCOMPILE:
- *	This symbol, if defined, signifies that we our
- *	build process is a cross-compilation.
- */
-/*#define CROSSCOMPILE		/**/
-
-/* INTSIZE:
- *	This symbol contains the value of sizeof(int) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- *	This symbol contains the value of sizeof(long) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- *	This symbol contains the value of sizeof(short) so that the C
- *	preprocessor can make decisions based on it.
- */
-#define INTSIZE 4		/**/
-#define LONGSIZE 4		/**/
-#define SHORTSIZE 2		/**/
-
-/* MULTIARCH:
- *	This symbol, if defined, signifies that the build
- *	process will produce some binary files that are going to be
- *	used in a cross-platform environment.  This is the case for
- *	example with the NeXT "fat" binaries that contain executables
- *	for several CPUs.
+/* OSNAME:
+ *	This symbol contains the name of the operating system, as determined
+ *	by Configure.  You shouldn't rely on it too much; the specific
+ *	feature tests from Configure are generally more reliable.
  */
-/*#define MULTIARCH		/**/
+#define OSNAME "VOS"		/**/
 
 /* MEM_ALIGNBYTES:
  *	This symbol contains the number of bytes required to align a
- *	double. Usual values are 2, 4 and 8. The default is eight,
- *	for safety.
+ *	double, or a long double when applicable. Usual values are 2,
+ *	4 and 8. The default is eight, for safety.
  */
 #if defined(CROSSCOMPILE) || defined(MULTIARCH)
 #  define MEM_ALIGNBYTES 8
@@ -1062,6 +1081,61 @@
 #define MEM_ALIGNBYTES 8
 #endif
 
+/* ARCHLIB:
+ *	This variable, if defined, holds the name of the directory in
+ *	which the user wants to put architecture-dependent public
+ *	library files for perl5.  It is most often a local directory
+ *	such as /usr/local/lib.  Programs using this variable must be
+ *	prepared to deal with filename expansion.  If ARCHLIB is the
+ *	same as PRIVLIB, it is not defined, since presumably the
+ *	program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ *	This symbol contains the ~name expanded version of ARCHLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define ARCHLIB ""		/**/
+/*#define ARCHLIB_EXP ""		/**/
+
+/* ARCHNAME:
+ *	This symbol holds a string representing the architecture name.
+ *	It may be used to construct an architecture-dependant pathname
+ *	where library files may be held under a private library, for
+ *	instance.
+ */
+#define ARCHNAME "vos"		/**/
+
+/* HAS_ATOLF:
+ *	This symbol, if defined, indicates that the atolf routine is
+ *	available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF		/**/
+
+/* HAS_ATOLL:
+ *	This symbol, if defined, indicates that the atoll routine is
+ *	available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL		/**/
+
+/* BIN:
+ *	This symbol holds the path of the bin directory where the package will
+ *	be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ *	This symbol is the filename expanded version of the BIN symbol, for
+ *	programs that do not want to deal with that at run-time.
+ */
+#define BIN "/system/ported/command_library"	/**/
+#define BIN_EXP "/system/ported/command_library"	/**/
+
+/* PERL_BINCOMPAT_5005:
+ *	This symbol, if defined, indicates that Perl 5.006 should be
+ *	binary-compatible with Perl 5.005.  This is impossible for builds
+ *	that use features like threads and multiplicity it is always $undef
+ *	for those versions.
+ */
+/*#define PERL_BINCOMPAT_5005			/**/
+
 /* BYTEORDER:
  *	This symbol holds the hexadecimal constant defined in byteorder,
  *	i.e. 0x1234 or 0x4321, etc...
@@ -1105,406 +1179,6 @@
 #define BYTEORDER 0x4321	/* large digits for MSB */
 #endif /* NeXT */
 
-/* CASTI32:
- *	This symbol is defined if the C compiler can cast negative
- *	or large floating point numbers to 32-bit ints.
- */
-/*#define	CASTI32		/**/
-
-/* CASTNEGFLOAT:
- *	This symbol is defined if the C compiler can cast negative
- *	numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- *	This symbol contains flags that say what difficulties the compiler
- *	has casting odd floating values to unsigned long:
- *		0 = ok
- *		1 = couldn't cast < 0
- *		2 = couldn't cast >= 0x80000000
- *		4 = couldn't cast in argument expression list
- */
-#define	CASTNEGFLOAT		/**/
-#define CASTFLAGS 0		/**/
-
-/* VOID_CLOSEDIR:
- *	This symbol, if defined, indicates that the closedir() routine
- *	does not return a value.
- */
-/*#define VOID_CLOSEDIR		/**/
-
-/* HAS_FD_SET:
- *	This symbol, when defined, indicates presence of the fd_set typedef
- *	in <sys/types.h>
- */
-/*#define HAS_FD_SET	/**/
-
-/* Gconvert:
- *	This preprocessor macro is defined to convert a floating point
- *	number to a string without a trailing decimal point.  This
- *	emulates the behavior of sprintf("%g"), but is sometimes much more
- *	efficient.  If gconvert() is not available, but gcvt() drops the
- *	trailing decimal point, then gcvt() is used.  If all else fails,
- *	a macro using sprintf("%g") is used. Arguments for the Gconvert
- *	macro are: value, number of digits, whether trailing zeros should
- *	be retained, and the output buffer.
- *	Possible values are:
- *		d_Gconvert='gconvert((x),(n),(t),(b))'
- *		d_Gconvert='gcvt((x),(n),(b))'
- *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- *	The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GNULIBC:
- *	This symbol, if defined, indicates to the C program that 
- *	the GNU C library is being used.
- */
-/*#define HAS_GNULIBC  	/**/
-/* HAS_ISASCII:
- *	This manifest constant lets the C program know that isascii 
- *	is available.
- */
-#define HAS_ISASCII		/**/
-
-/* HAS_LCHOWN:
- *	This symbol, if defined, indicates that the lchown routine is
- *	available to operate on a symbolic link (instead of following the
- *	link).
- */
-/*#define HAS_LCHOWN		/**/
-
-/* HAS_OPEN3:
- *	This manifest constant lets the C program know that the three
- *	argument form of open(2) is available.
- */
-#define HAS_OPEN3		/**/
-
-/* HAS_SAFE_BCOPY:
- *	This symbol, if defined, indicates that the bcopy routine is available
- *	to copy potentially overlapping memory blocks. Otherwise you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-/*#define HAS_SAFE_BCOPY	/**/
-
-/* HAS_SAFE_MEMCPY:
- *	This symbol, if defined, indicates that the memcpy routine is available
- *	to copy potentially overlapping memory blocks. Otherwise you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-/*#define HAS_SAFE_MEMCPY	/**/
-
-/* HAS_SANE_MEMCMP:
- *	This symbol, if defined, indicates that the memcmp routine is available
- *	and can be used to compare relative magnitudes of chars with their high
- *	bits set.  If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP	/**/
-
-/* HAS_SIGACTION:
- *	This symbol, if defined, indicates that Vr4's sigaction() routine
- *	is available.
- */
-/*#define HAS_SIGACTION	/**/
-
-/* HAS_SIGSETJMP:
- *	This variable indicates to the C program that the sigsetjmp()
- *	routine is available to save the calling process's registers
- *	and stack environment for later use by siglongjmp(), and
- *	to optionally save the process's signal mask.  See
- *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- *	This macro is used in the same way as sigsetjmp(), but will invoke
- *	traditional setjmp() if sigsetjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- *	This macro is used in the same way as siglongjmp(), but will invoke
- *	traditional longjmp() if siglongjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP	/**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_STDIO_PTR:
- *	This symbol is defined if the _ptr and _cnt fields (or similar)
- *	of the stdio FILE structure can be used to access the stdio buffer
- *	for a file handle.  If this is defined, then the FILE_ptr(fp)
- *	and FILE_cnt(fp) macros will also be defined and should be used
- *	to access these fields.
- */
-/* FILE_ptr:
- *	This macro is used to access the _ptr field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- *	This symbol is defined if the FILE_ptr macro can be used as an
- *	lvalue.
- */
-/* FILE_cnt:
- *	This macro is used to access the _cnt field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- *	This symbol is defined if the FILE_cnt macro can be used as an
- *	lvalue.
- */
-#define USE_STDIO_PTR 	/**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp)	((fp)->_ptr)
-#define STDIO_PTR_LVALUE 		/**/
-#define FILE_cnt(fp)	((fp)->_cnt)
-#define STDIO_CNT_LVALUE 		/**/
-#endif
-
-/* USE_STDIO_BASE:
- *	This symbol is defined if the _base field (or similar) of the
- *	stdio FILE structure can be used to access the stdio buffer for
- *	a file handle.  If this is defined, then the FILE_base(fp) macro
- *	will also be defined and should be used to access this field.
- *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
- *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
- *	will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- *	This macro is used to access the _base field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- *	This macro is used to determine the number of bytes in the I/O
- *	buffer pointed to by _base field (or equivalent) of the FILE
- *	structure pointed to its argument. This macro will always be defined
- *	if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE 	/**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp)	((fp)->_base)
-#define FILE_bufsiz(fp)	((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* HAS_VPRINTF:
- *	This symbol, if defined, indicates that the vprintf routine is available
- *	to printf with a pointer to an argument list.  If unavailable, you
- *	may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- *	This symbol is defined if this system has vsprintf() returning type
- *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
- *	is up to the package author to declare vsprintf correctly based on the
- *	symbol.
- */
-#define HAS_VPRINTF	/**/
-/*#define USE_CHAR_VSPRINTF 	/**/
-
-/* DOUBLESIZE:
- *	This symbol contains the size of a double, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define DOUBLESIZE 8		/**/
-
-/* I_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <time.h>.
- */
-/* I_SYS_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h> with KERNEL defined.
- */
-/*#define I_TIME		/**/
-#define I_SYS_TIME		/**/
-/*#define I_SYS_TIME_KERNEL		/**/
-
-/* VAL_O_NONBLOCK:
- *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- *	non-blocking I/O for the file descriptor. Note that there is no way
- *	back, i.e. you cannot turn it blocking again this way. If you wish to
- *	alternatively switch between blocking and non-blocking, use the
- *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- *	This symbol holds the errno error code set by read() when no data was
- *	present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- *	This symbol holds the return code from read() when no data is present
- *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- *	not defined, then you can't distinguish between no data and EOF by
- *	issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- *	This symbol, if defined, indicates to the C program that a read() on
- *	a non-blocking file descriptor will return 0 on EOF, and not the value
- *	held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
-
-/* PTRSIZE:
- *	This symbol contains the size of a pointer, so that the C preprocessor
- *	can make decisions based on it.  It will be sizeof(void *) if
- *	the compiler supports (void *); otherwise it will be
- *	sizeof(char *).
- */
-#define PTRSIZE 4		/**/
-
-/* Drand01:
- *	This macro is to be used to generate uniformly distributed
- *	random numbers over the range [0., 1.[.  You may have to supply
- *	an 'extern double drand48();' in your program since SunOS 4.1.3
- *	doesn't provide you with anything relevant in it's headers.
- *	See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- *	This symbol defines the type of the argument of the
- *	random seed function.
- */
-/* seedDrand01:
- *	This symbol defines the macro to be used in seeding the
- *	random number generator (see Drand01).
- */
-/* RANDBITS:
- *	This symbol indicates how many bits are produced by the
- *	function used to generate normalized random numbers.
- *	Values include 15, 16, 31, and 48.
- */
-#define Drand01()		rand()/(RAND_MAX+1)		/**/
-#define Rand_seed_t		unsigned int		/**/
-#define seedDrand01(x)	srand((Rand_seed_t)x)	/**/
-#define RANDBITS		15		/**/
-
-/* SSize_t:
- *	This symbol holds the type used by functions that return
- *	a count of bytes or an error condition.  It must be a signed type.
- *	It is usually ssize_t, but may be long or int, etc.
- *	It may be necessary to include <sys/types.h> or <unistd.h>
- *	to get any typedef'ed information.
- *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t ssize_t	 /* signed count of bytes */
-
-/* EBCDIC:
- *     This symbol, if defined, indicates that this system uses
- *	EBCDIC encoding.
- */
-/*#define	EBCDIC 		/**/
-
-/* ARCHLIB:
- *	This variable, if defined, holds the name of the directory in
- *	which the user wants to put architecture-dependent public
- *	library files for perl5.  It is most often a local directory
- *	such as /usr/local/lib.  Programs using this variable must be
- *	prepared to deal with filename expansion.  If ARCHLIB is the
- *	same as PRIVLIB, it is not defined, since presumably the
- *	program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- *	This symbol contains the ~name expanded version of ARCHLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define ARCHLIB ""		/**/
-/*#define ARCHLIB_EXP ""		/**/
-
-/* BIN:
- *	This symbol holds the path of the bin directory where the package will
- *	be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- *	This symbol is the filename expanded version of the BIN symbol, for
- *	programs that do not want to deal with that at run-time.
- */
-#define BIN "/system/ported/command_library"	/**/
-#define BIN_EXP "/system/ported/command_library"	/**/
-
-/* INSTALL_USR_BIN_PERL:
- *	This symbol, if defined, indicates that Perl is to be installed
- * 	also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL	/**/
-
-/* PRIVLIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- *	This symbol contains the ~name expanded version of PRIVLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "/system/ported/perl/lib/5.005"		/**/
-#define PRIVLIB_EXP "/system/ported/perl/lib/5.005"		/**/
-
-/* SITEARCH:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-dependent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITEARCH_EXP:
- *	This symbol contains the ~name expanded version of SITEARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define SITEARCH ""		/**/
-/*#define SITEARCH_EXP ""		/**/
-
-/* SITELIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-independent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITELIB_EXP:
- *	This symbol contains the ~name expanded version of SITELIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITELIB "/system/ported/perl/lib/site/5.005"		/**/
-#define SITELIB_EXP "/system/ported/perl/lib/site/5.005"		/**/
-
-/* PERL_VENDORLIB_EXP:
- *	This symbol contains the ~name expanded version of VENDORLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PERL_VENDORLIB_EXP ""		/**/
-
-/* OSNAME:
- *	This symbol contains the name of the operating system, as determined
- *	by Configure.  You shouldn't rely on it too much; the specific
- *	feature tests from Configure are generally more reliable.
- */
-#define OSNAME "VOS"		/**/
-
 /* CAT2:
  *	This macro catenates 2 tokens together.
  */
@@ -1562,6 +1236,33 @@
  */
 /*#define HAS_ACCESS		/**/
 
+/* CASTI32:
+ *	This symbol is defined if the C compiler can cast negative
+ *	or large floating point numbers to 32-bit ints.
+ */
+/*#define	CASTI32		/**/
+
+/* CASTNEGFLOAT:
+ *	This symbol is defined if the C compiler can cast negative
+ *	numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ *	This symbol contains flags that say what difficulties the compiler
+ *	has casting odd floating values to unsigned long:
+ *		0 = ok
+ *		1 = couldn't cast < 0
+ *		2 = couldn't cast >= 0x80000000
+ *		4 = couldn't cast in argument expression list
+ */
+#define	CASTNEGFLOAT		/**/
+#define CASTFLAGS 0		/**/
+
+/* VOID_CLOSEDIR:
+ *	This symbol, if defined, indicates that the closedir() routine
+ *	does not return a value.
+ */
+/*#define VOID_CLOSEDIR		/**/
+
 /* HAS_CSH:
  *	This symbol, if defined, indicates that the C-shell exists.
  */
@@ -1573,6 +1274,22 @@
 #define CSH ""	/**/
 #endif
 
+/* DLSYM_NEEDS_UNDERSCORE:
+ *	This symbol, if defined, indicates that we need to prepend an
+ *	underscore to the symbol name before calling dlsym().  This only
+ *	makes sense if you *have* dlsym, which we will presume is the
+ *	case if you're using dl_dlopen.xs.
+ */
+/*#define 	DLSYM_NEEDS_UNDERSCORE 	/**/
+
+/* HAS_DRAND48_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the drand48() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern double drand48 _((void));
+ */
+/*#define	HAS_DRAND48_PROTO	/**/
+
 /* HAS_ENDGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for finalizing sequential access of the group database.
@@ -1609,6 +1326,70 @@
  */
 #define HAS_ENDSERVENT		/**/
 
+/* HAS_ENDSPENT:
+ *	This symbol, if defined, indicates that the endspent system call is
+ *	available to finalize the scan of SysV shadow password entries.
+ */
+/*#define HAS_ENDSPENT		/**/
+
+/* HAS_FD_SET:
+ *	This symbol, when defined, indicates presence of the fd_set typedef
+ *	in <sys/types.h>
+ */
+/*#define HAS_FD_SET	/**/
+
+/* HAS_FPOS64_T:
+ *	This symbol will be defined if the C compiler supports fpos64_t.
+ */
+/*#define	HAS_FPOS64_T    	/**/
+
+/* HAS_STRUCT_FS_DATA:
+ *	This symbol, if defined, indicates that the struct fs_data
+ *	to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_FS_DATA	/**/
+
+/* HAS_FSEEKO:
+ *	This symbol, if defined, indicates that the fseeko routine is
+ *	available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FSEEKO		/**/
+
+/* HAS_FSTATFS:
+ *	This symbol, if defined, indicates that the fstatfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATFS		/**/
+
+/* HAS_FTELLO:
+ *	This symbol, if defined, indicates that the ftello routine is
+ *	available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FTELLO		/**/
+
+/* Gconvert:
+ *	This preprocessor macro is defined to convert a floating point
+ *	number to a string without a trailing decimal point.  This
+ *	emulates the behavior of sprintf("%g"), but is sometimes much more
+ *	efficient.  If gconvert() is not available, but gcvt() drops the
+ *	trailing decimal point, then gcvt() is used.  If all else fails,
+ *	a macro using sprintf("%g") is used. Arguments for the Gconvert
+ *	macro are: value, number of digits, whether trailing zeros should
+ *	be retained, and the output buffer.
+ *	Possible values are:
+ *		d_Gconvert='gconvert((x),(n),(t),(b))'
+ *		d_Gconvert='gcvt((x),(n),(b))'
+ *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ *	The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* HAS_GETCWD:
+ *	This symbol, if defined, indicates that the getcwd routine is
+ *	available to get the current working directory.
+ */
+#define HAS_GETCWD		/**/
+
 /* HAS_GETGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for sequential access of the group database.
@@ -1657,11 +1438,31 @@
  */
 #define HAS_GETHOSTNAME	/**/
 #define HAS_UNAME		/**/
-/*#define HAS_PHOSTNAME		/**/
+/*#define HAS_PHOSTNAME	/**/
 #ifdef HAS_PHOSTNAME
 #define PHOSTNAME ""	/* How to get the host name */
 #endif
 
+/* HAS_GETHOST_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for gethostent(), gethostbyname(), and
+ *	gethostbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETHOST_PROTOS	/**/
+
+/* HAS_GETMNT:
+ *	This symbol, if defined, indicates that the getmnt routine is
+ *	available to get filesystem mount info by filename.
+ */
+/*#define HAS_GETMNT		/**/
+
+/* HAS_GETMNTENT:
+ *	This symbol, if defined, indicates that the getmntent routine is
+ *	available to iterate through mounted file systems to get their info.
+ */
+/*#define HAS_GETMNTENT		/**/
+
 /* HAS_GETNETBYADDR:
  *	This symbol, if defined, indicates that the getnetbyaddr() routine is
  *	available to look up networks by their IP addresses.
@@ -1680,6 +1481,14 @@
  */
 #define HAS_GETNETENT		/**/
 
+/* HAS_GETNET_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getnetent(), getnetbyname(), and
+ *	getnetbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETNET_PROTOS	/**/
+
 /* HAS_GETPROTOENT:
  *	This symbol, if defined, indicates that the getprotoent() routine is
  *	available to look up protocols in some data base or another.
@@ -1697,6 +1506,14 @@
 #define HAS_GETPROTOBYNAME		/**/
 #define HAS_GETPROTOBYNUMBER		/**/
 
+/* HAS_GETPROTO_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getprotoent(), getprotobyname(), and
+ *	getprotobyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETPROTO_PROTOS	/**/
+
 /* HAS_GETPWENT:
  *	This symbol, if defined, indicates that the getpwent routine is
  *	available for sequential access of the passwd database.
@@ -1710,6 +1527,26 @@
  */
 #define HAS_GETSERVENT		/**/
 
+/* HAS_GETSERV_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getservent(), getservbyname(), and
+ *	getservbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETSERV_PROTOS	/**/
+
+/* HAS_GETSPENT:
+ *	This symbol, if defined, indicates that the getspent system call is
+ *	available to retrieve SysV shadow password entries sequentially.
+ */
+/*#define HAS_GETSPENT		/**/
+
+/* HAS_GETSPNAM:
+ *	This symbol, if defined, indicates that the getspnam system call is
+ *	available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM		/**/
+
 /* HAS_GETSERVBYNAME:
  *	This symbol, if defined, indicates that the getservbyname()
  *	routine is available to look up services by their name.
@@ -1721,6 +1558,20 @@
 #define HAS_GETSERVBYNAME		/**/
 #define HAS_GETSERVBYPORT		/**/
 
+/* HAS_GNULIBC:
+ *	This symbol, if defined, indicates to the C program that 
+ *	the GNU C library is being used.
+ */
+/*#define HAS_GNULIBC  	/**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+#   define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ *	This symbol, if defined, indicates that the hasmntopt routine is
+ *	available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT		/**/
+
 /* HAS_HTONL:
  *	This symbol, if defined, indicates that the htonl() routine (and
  *	friends htons() ntohl() ntohs()) are available to do network
@@ -1746,6 +1597,40 @@
 #define HAS_NTOHL		/**/
 #define HAS_NTOHS		/**/
 
+/* HAS_ICONV:
+ *	This symbol, if defined, indicates that the iconv routine is
+ *	available to do character set conversions.
+ */
+/*#define HAS_ICONV		/**/
+
+/* HAS_INT64_T:
+ *     This symbol will defined if the C compiler supports int64_t.
+ *     Usually the <inttypes.h> needs to be included, but sometimes
+ *	<sys/types.h> is enough.
+ */
+#     HAS_INT64_T               /**/
+
+/* HAS_ISASCII:
+ *	This manifest constant lets the C program know that isascii 
+ *	is available.
+ */
+#define HAS_ISASCII		/**/
+
+/* HAS_LCHOWN:
+ *	This symbol, if defined, indicates that the lchown routine is
+ *	available to operate on a symbolic link (instead of following the
+ *	link).
+ */
+/*#define HAS_LCHOWN		/**/
+
+/* HAS_LDBL_DIG:
+ *	This symbol, if defined, indicates that this system's <float.h>
+ *	or <limits.h> defines the symbol LDBL_DIG, which is the number
+ *	of significant digits in a long double precision number. Unlike
+ *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG 	/* */
+
 /* HAS_LONG_DOUBLE:
  *	This symbol will be defined if the C compiler supports long
  *	doubles.
@@ -1779,12 +1664,113 @@
  */
 #define HAS_MEMCHR	/**/
 
+/* HAS_MKDTEMP:
+ *	This symbol, if defined, indicates that the mkdtemp routine is
+ *	available to exclusively create a uniquely named temporary directory.
+ */
+# HAS_MKDTEMP		/**/
+
+/* HAS_MKSTEMP:
+ *	This symbol, if defined, indicates that the mkstemp routine is
+ *	available to exclusively create and open a uniquely named
+ *	temporary file.
+ */
+# HAS_MKSTEMP		/**/
+
+/* HAS_MKSTEMPS:
+ *	This symbol, if defined, indicates that the mkstemps routine is
+ *	available to excluslvely create and open a uniquely named
+ *	(with a suffix) temporary file.
+ */
+# HAS_MKSTEMPS		/**/
+
+/* HAS_MMAP:
+ *	This symbol, if defined, indicates that the mmap system call is
+ *	available to map a file into memory.
+ */
+/* Mmap_t:
+ *	This symbol holds the return type of the mmap() system call
+ *	(and simultaneously the type of the first argument).
+ *	Usually set to 'void *' or 'cadd_t'.
+ */
+/*#define HAS_MMAP		/**/
+#define Mmap_t $mmaptype	/**/
+
+/* HAS_MPROTECT:
+ *	This symbol, if defined, indicates that the mprotect system call is
+ *	available to modify the access protection of a memory mapped file.
+ */
+/*#define HAS_MPROTECT		/**/
+
 /* HAS_MSG:
  *	This symbol, if defined, indicates that the entire msg*(2) library is
  *	supported (IPC mechanism based on message queues).
  */
 /*#define HAS_MSG		/**/
 
+/* HAS_OFF64_T:
+ *	This symbol will be defined if the C compiler supports off64_t.
+ */
+/*#define	HAS_OFF64_T    		/**/
+
+/* HAS_OPEN3:
+ *	This manifest constant lets the C program know that the three
+ *	argument form of open(2) is available.
+ */
+#define HAS_OPEN3		/**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ *	This symbol, if defined, indicates how to create pthread
+ *	in joinable (aka undetached) state.  NOTE: not defined
+ *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ *	(the new version of the constant).
+ *	If defined, known values are PTHREAD_CREATE_UNDETACHED
+ *	and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE  /**/
+
+/* HAS_PTHREAD_YIELD:
+ *	This symbol, if defined, indicates that the pthread_yield 
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ *	This symbol defines the way to yield the execution of
+ *	the current thread.  Known ways are sched_yield,
+ *	pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ *	This symbol, if defined, indicates that the sched_yield
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD	/**/
+#define SCHED_YIELD		/**/
+/*#define HAS_SCHED_YIELD	/**/
+
+/* HAS_SAFE_BCOPY:
+ *	This symbol, if defined, indicates that the bcopy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+/*#define HAS_SAFE_BCOPY	/**/
+
+/* HAS_SAFE_MEMCPY:
+ *	This symbol, if defined, indicates that the memcpy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+/*#define HAS_SAFE_MEMCPY	/**/
+
+/* HAS_SANE_MEMCMP:
+ *	This symbol, if defined, indicates that the memcmp routine is available
+ *	and can be used to compare relative magnitudes of chars with their high
+ *	bits set.  If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP	/**/
+
 /* HAS_SEM:
  *	This symbol, if defined, indicates that the entire sem*(2) library is
  *	supported.
@@ -1834,6 +1820,12 @@
  */
 #define HAS_SETSERVENT		/**/
 
+/* HAS_SETSPENT:
+ *	This symbol, if defined, indicates that the setspent system call is
+ *	available to initialize the scan of SysV shadow password entries.
+ */
+/*#define HAS_SETSPENT		/**/
+
 /* HAS_SETVBUF:
  *	This symbol, if defined, indicates that the setvbuf routine is
  *	available to change buffering on an open stdio stream.
@@ -1841,12 +1833,55 @@
  */
 #define HAS_SETVBUF		/**/
 
+/* USE_SFIO:
+ *	This symbol, if defined, indicates that sfio should
+ *	be used.
+ */
+/*#define	USE_SFIO		/**/
+
 /* HAS_SHM:
  *	This symbol, if defined, indicates that the entire shm*(2) library is
  *	supported.
  */
 /*#define HAS_SHM		/**/
 
+/* HAS_SIGACTION:
+ *	This symbol, if defined, indicates that Vr4's sigaction() routine
+ *	is available.
+ */
+/*#define HAS_SIGACTION	/**/
+
+/* HAS_SIGSETJMP:
+ *	This variable indicates to the C program that the sigsetjmp()
+ *	routine is available to save the calling process's registers
+ *	and stack environment for later use by siglongjmp(), and
+ *	to optionally save the process's signal mask.  See
+ *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ *	This macro is used in the same way as sigsetjmp(), but will invoke
+ *	traditional setjmp() if sigsetjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ *	This macro is used in the same way as siglongjmp(), but will invoke
+ *	traditional longjmp() if siglongjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP	/**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
 /* HAS_SOCKET:
  *	This symbol, if defined, indicates that the BSD socket interface is
  *	supported.
@@ -1894,6 +1929,12 @@
 /*#define	HAS_MSG_PROXY	/**/
 /*#define	HAS_SCM_RIGHTS	/**/
 
+/* HAS_SQRTL:
+ *	This symbol, if defined, indicates that the sqrtl routine is
+ *	available to do long double square roots.
+ */
+/*#define HAS_SQRTL		/**/
+
 /* USE_STAT_BLOCKS:
  *	This symbol is defined if this system has a stat structure declaring
  *	st_blksize and st_blocks.
@@ -1902,6 +1943,88 @@
 /*#define USE_STAT_BLOCKS 	/**/
 #endif
 
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	does have the f_flags member containing the mount flags of
+ *	the filesystem containing the file.
+ *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
+ *	have statfs() and struct statfs, they have ustat() and getmnt()
+ *	with struct ustat and struct fs_data.
+ */
+/*#define HAS_STRUCT_STATFS_F_FLAGS		/**/
+
+/* HAS_STRUCT_STATFS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_STATFS	/**/
+
+/* HAS_FSTATVFS:
+ *	This symbol, if defined, indicates that the fstatvfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATVFS		/**/
+
+/* USE_STDIO_PTR:
+ *	This symbol is defined if the _ptr and _cnt fields (or similar)
+ *	of the stdio FILE structure can be used to access the stdio buffer
+ *	for a file handle.  If this is defined, then the FILE_ptr(fp)
+ *	and FILE_cnt(fp) macros will also be defined and should be used
+ *	to access these fields.
+ */
+/* FILE_ptr:
+ *	This macro is used to access the _ptr field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ *	This symbol is defined if the FILE_ptr macro can be used as an
+ *	lvalue.
+ */
+/* FILE_cnt:
+ *	This macro is used to access the _cnt field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ *	This symbol is defined if the FILE_cnt macro can be used as an
+ *	lvalue.
+ */
+#define USE_STDIO_PTR 	/**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp)	((fp)->_ptr)
+#define STDIO_PTR_LVALUE 		/**/
+#define FILE_cnt(fp)	((fp)->_cnt)
+#define STDIO_CNT_LVALUE 		/**/
+#endif
+
+/* USE_STDIO_BASE:
+ *	This symbol is defined if the _base field (or similar) of the
+ *	stdio FILE structure can be used to access the stdio buffer for
+ *	a file handle.  If this is defined, then the FILE_base(fp) macro
+ *	will also be defined and should be used to access this field.
+ *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
+ *	will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ *	This macro is used to access the _base field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ *	This macro is used to determine the number of bytes in the I/O
+ *	buffer pointed to by _base field (or equivalent) of the FILE
+ *	structure pointed to its argument. This macro will always be defined
+ *	if USE_STDIO_BASE is defined.
+ */
+#define USE_STDIO_BASE 	/**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp)	((fp)->_base)
+#define FILE_bufsiz(fp)	((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
 /* HAS_STRERROR:
  *	This symbol, if defined, indicates that the strerror routine is
  *	available to translate error numbers to strings. See the writeup
@@ -1921,6 +2044,52 @@
 #define HAS_SYS_ERRLIST	/**/
 #define Strerror(e) strerror(e)
 
+/* HAS_STRTOLD:
+ *	This symbol, if defined, indicates that the strtold routine is
+ *	available to convert strings to long doubles.
+ */
+/*#define HAS_STRTOLD		/**/
+
+/* HAS_STRTOLL:
+ *	This symbol, if defined, indicates that the strtoll routine is
+ *	available to convert strings to long longs.
+ */
+/*#define HAS_STRTOLL		/**/
+
+/* HAS_STRTOULL:
+ *	This symbol, if defined, indicates that the strtoull routine is
+ *	available to convert strings to unsigned long longs.
+ */
+/*#define HAS_STRTOULL		/**/
+
+/* HAS_STRTOUQ:
+ *	This symbol, if defined, indicates that the strtouq routine is
+ *	available to convert strings to unsigned long longs (quads).
+ */
+/*#define HAS_STRTOUQ		/**/
+
+/* HAS_TELLDIR_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the telldir() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern long telldir _((DIR*));
+ */
+/*#define	HAS_TELLDIR_PROTO	/**/
+
+/* Time_t:
+ *	This symbol holds the type returned by time(). It can be long,
+ *	or time_t on BSD sites (in which case <sys/types.h> should be
+ *	included).
+ */
+#define Time_t time_t		/* Time type */
+
+/* HAS_TIMES:
+ *	This symbol, if defined, indicates that the times() routine exists.
+ *	Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES		/**/
+
 /* HAS_UNION_SEMUN:
  *	This symbol, if defined, indicates that the union semun is
  *	defined by including <sys/sem.h>.  If not, the user code
@@ -1943,6 +2112,12 @@
 /*#define USE_SEMCTL_SEMUN	/**/
 /*#define USE_SEMCTL_SEMID_DS	/**/
 
+/* HAS_USTAT:
+ *	This symbol, if defined, indicates that the ustat system call is
+ *	available to query file system statistics by dev_t.
+ */
+/*#define HAS_USTAT		/**/
+
 /* HAS_VFORK:
  *	This symbol, if defined, indicates that vfork() exists.
  */
@@ -1956,6 +2131,78 @@
  */
 #define Signal_t void	/* Signal handler's return type */
 
+/* HAS_VPRINTF:
+ *	This symbol, if defined, indicates that the vprintf routine is available
+ *	to printf with a pointer to an argument list.  If unavailable, you
+ *	may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ *	This symbol is defined if this system has vsprintf() returning type
+ *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
+ *	is up to the package author to declare vsprintf correctly based on the
+ *	symbol.
+ */
+#define HAS_VPRINTF	/**/
+/*#define USE_CHAR_VSPRINTF 	/**/
+
+/* USE_DYNAMIC_LOADING:
+ *	This symbol, if defined, indicates that dynamic loading of
+ *	some sort is available.
+ */
+/*#define USE_DYNAMIC_LOADING		/**/
+
+/* DOUBLESIZE:
+ *	This symbol contains the size of a double, so that the C preprocessor
+ *	can make decisions based on it.
+ */
+#define DOUBLESIZE 8		/**/
+
+/* EBCDIC:
+ *     This symbol, if defined, indicates that this system uses
+ *	EBCDIC encoding.
+ */
+/*#define	EBCDIC 		/**/
+
+/* FFLUSH_NULL:
+ *	This symbol, if defined, tells that fflush(NULL) does flush
+ *	all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ *	This symbol, if defined, tells that to flush
+ *	all pending stdio output one must loop through all
+ *	the stdio file handles stored in an array and fflush them.
+ *	Note that if fflushNULL is defined, fflushall will not
+ *	even be probed for and will be left undefined.
+ */
+#define	FFLUSH_NULL 		/**/
+/*#define	FFLUSH_ALL 		/**/
+
+/* Fpos_t:
+ *	This symbol holds the type used to declare file positions in libc.
+ *	It can be fpos_t, long, uint, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t		/* File position type */
+
+/* Gid_t_f:
+ *	This symbol defines the format string used for printing a Gid_t.
+ */
+#define	Gid_t_f		"d"		/**/
+
+/* Gid_t_size:
+ *	This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4		/* GID size */
+
+/* Gid_t:
+ *	This symbol holds the return type of getgid() and the type of
+ *	argument to setrgid() and related functions.  Typically,
+ *	it is the type of group ids in the kernel. It can be int, ushort,
+ *	uid_t, etc... It may be necessary to include <sys/types.h> to get
+ *	any typedef'ed information.
+ */
+#define Gid_t gid_t		/* Type for getgid(), etc... */
+
 /* Groups_t:
  *	This symbol holds the type used for the second argument to
  *	getgroups() and setgropus().  Usually, this is the same as
@@ -1969,6 +2216,19 @@
 #define Groups_t gid_t	/* Type for 2nd arg to [sg]etgroups() */
 #endif
 
+/* DB_Prefix_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t	int		/**/
+#define DB_Prefix_t	int  	/**/
+
 /* I_GRP:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <grp.h>.
@@ -1980,12 +2240,54 @@
 /*#define I_GRP		/**/
 /*#define GRPASSWD	/**/
 
+/* I_ICONV:
+ *	This symbol, if defined, indicates that <iconv.h> exists and
+ *	should be included.
+ */
+/*#define	I_ICONV		/**/
+
+/* I_INTTYPES:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <inttypes.h>.
+ */
+/*#define   I_INTTYPES                /**/
+
+/* I_MACH_CTHREADS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <mach/cthreads.h>.
+ */
+/*#define   I_MACH_CTHREADS	/**/
+
+/* I_MNTENT:
+ *	This symbol, if defined, indicates that <mntent.h> exists and
+ *	should be included.
+ */
+/*#define	I_MNTENT		/**/
+
 /* I_NETDB:
  *	This symbol, if defined, indicates that <netdb.h> exists and
  *	should be included.
  */
 #define I_NETDB		/**/
 
+/* I_NETINET_TCP:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <netinet/tcp.h>.
+ */
+/*#define   I_NETINET_TCP                /**/
+
+/* I_POLL:
+ *	This symbol, if defined, indicates that <poll.h> exists and
+ *	should be included.
+ */
+/*#define	I_POLL		/**/
+
+/* I_PTHREAD:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <pthread.h>.
+ */
+/*#define   I_PTHREAD	/**/
+
 /* I_PWD:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <pwd.h>.
@@ -2032,297 +2334,6 @@
 /*#define PWGECOS	/**/
 /*#define PWPASSWD	/**/
 
-/* I_SYSUIO:
- *	This symbol, if defined, indicates that <sys/uio.h> exists and
- *	should be included.
- */
-/*#define	I_SYSUIO		/**/
-
-/* Free_t:
- *	This variable contains the return type of free().  It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- *	This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t void *			/**/
-#define Free_t void			/**/
-
-/* MYMALLOC:
- *	This symbol, if defined, indicates that we're using our own malloc.
- */
-/*#define MYMALLOC			/**/
-
-/* SIG_NAME:
- *	This symbol contains a list of signal names in order of
- *	signal number. This is intended
- *	to be used as a static array initialization, like this:
- *		char *sig_name[] = { SIG_NAME };
- *	The signals in the list are separated with commas, and each signal
- *	is surrounded by double quotes. There is no leading SIG in the signal
- *	name, i.e. SIGQUIT is known as "QUIT".
- *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- *	etc., where nn is the actual signal number (e.g. NUM37).
- *	The signal number for sig_name[i] is stored in sig_num[i].
- *	The last element is 0 to terminate the list with a NULL.  This
- *	corresponds to the 0 at the end of the sig_num list.
- */
-/* SIG_NUM:
- *	This symbol contains a list of signal numbers, in the same order as the
- *	SIG_NAME list. It is suitable for static array initialization, as in:
- *		int sig_num[] = { SIG_NUM };
- *	The signals in the list are separated with commas, and the indices
- *	within that list and the SIG_NAME list match, so it's easy to compute
- *	the signal name from a number or vice versa at the price of a small
- *	dynamic linear lookup. 
- *	Duplicates are allowed, but are moved to the end of the list.
- *	The signal number corresponding to sig_name[i] is sig_number[i].
- *	if (i < NSIG) then sig_number[i] == i.  
- *	The last element is 0, corresponding to the 0 at the end of
- *	the sig_name list.
- */
-#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0		/**/
-#define SIG_NUM  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0		/**/
-
-/* VOIDFLAGS:
- *	This symbol indicates how much support of the void type is given by this
- *	compiler.  What various bits mean:
- *
- *	    1 = supports declaration of void
- *	    2 = supports arrays of pointers to functions returning void
- *	    4 = supports comparisons between pointers to void functions and
- *		    addresses of void functions
- *	    8 = suports declaration of generic void pointers
- *
- *	The package designer should define VOIDUSED to indicate the requirements
- *	of the package.  This can be done either by #defining VOIDUSED before
- *	including config.h, or by defining defvoidused in Myinit.U.  If the
- *	latter approach is taken, only those flags will be tested.  If the
- *	level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int		/* is void to be avoided? */
-#define M_VOID			/* Xenix strikes again */
-#endif
-
-/* HAS_ATOLF:
- *	This symbol, if defined, indicates that the atolf routine is
- *	available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF		/**/
-
-/* HAS_ATOLL:
- *	This symbol, if defined, indicates that the atoll routine is
- *	available to convert strings into long longs.
- */
-/*#define HAS_ATOLL		/**/
-
-/* PERL_BINCOMPAT_5005:
- *	This symbol, if defined, indicates that Perl 5.006 should be
- *	binary-compatible with Perl 5.005.  This is impossible for builds
- *	that use features like threads and multiplicity it is always $undef
- *	for those versions.
- */
-/*#define PERL_BINCOMPAT_5005			/**/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- *	This symbol, if defined, indicates that we need to prepend an
- *	underscore to the symbol name before calling dlsym().  This only
- *	makes sense if you *have* dlsym, which we will presume is the
- *	case if you're using dl_dlopen.xs.
- */
-/*#define 	DLSYM_NEEDS_UNDERSCORE 	/**/
-
-/* HAS_ENDSPENT:
- *	This symbol, if defined, indicates that the endspent system call is
- *	available to finalize the scan of SysV shadow password entries.
- */
-/*#define HAS_ENDSPENT		/**/
-
-/* HAS_STRUCT_FS_DATA:
- *	This symbol, if defined, indicates that the struct fs_data
- *	to do statfs() is supported.
- */
-/*#define HAS_STRUCT_FS_DATA	/**/
-
-/* HAS_FSEEKO:
- *	This symbol, if defined, indicates that the fseeko routine is
- *	available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FSEEKO		/**/
-
-/* HAS_FSTATFS:
- *	This symbol, if defined, indicates that the fstatfs routine is
- *	available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATFS		/**/
-/* HAS_FTELLO:
- *	This symbol, if defined, indicates that the ftello routine is
- *	available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FTELLO		/**/
-
-/* HAS_GETMNT:
- *	This symbol, if defined, indicates that the getmnt routine is
- *	available to get filesystem mount info by filename.
- */
-/*#define HAS_GETMNT		/**/
-
-/* HAS_GETMNTENT:
- *	This symbol, if defined, indicates that the getmntent routine is
- *	available to iterate through mounted file systems to get their info.
- */
-/*#define HAS_GETMNTENT		/**/
-
-/* HAS_GETSPENT:
- *	This symbol, if defined, indicates that the getspent system call is
- *	available to retrieve SysV shadow password entries sequentially.
- */
-/*#define HAS_GETSPENT		/**/
-
-/* HAS_GETSPNAM:
- *	This symbol, if defined, indicates that the getspnam system call is
- *	available to retrieve SysV shadow password entries by name.
- */
-/*#define HAS_GETSPNAM		/**/
-
-/* HAS_HASMNTOPT:
- *	This symbol, if defined, indicates that the hasmntopt routine is
- *	available to query the mount options of file systems.
- */
-/*#define HAS_HASMNTOPT		/**/
-
-/* HAS_INT64_T:
- *     This symbol will defined if the C compiler supports int64_t.
- *     Usually the <inttypes.h> needs to be included, but sometimes
- *	<sys/types.h> is enough.
- */
-/*#define     HAS_INT64_T               /**/
-
-/* HAS_LDBL_DIG:
- *	This symbol, if defined, indicates that this system's <float.h>
- *	or <limits.h> defines the symbol LDBL_DIG, which is the number
- *	of significant digits in a long double precision number. Unlike
- *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#define HAS_LDBL_DIG 	/* */
-
-/* HAS_SETSPENT:
- *	This symbol, if defined, indicates that the setspent system call is
- *	available to initialize the scan of SysV shadow password entries.
- */
-/*#define HAS_SETSPENT		/**/
-
-/* USE_SFIO:
- *	This symbol, if defined, indicates that sfio should
- *	be used.
- */
-/*#define	USE_SFIO		/**/
-
-/* HAS_SQRTL:
- *	This symbol, if defined, indicates that the sqrtl routine is
- *	available to do long double square roots.
- */
-/*#define HAS_SQRTL		/**/
-
-/* HAS_STRUCT_STATFS_F_FLAGS:
- *	This symbol, if defined, indicates that the struct statfs
- *	does have the f_flags member containing the mount flags of
- *	the filesystem containing the file.
- *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
- *	have statfs() and struct statfs, they have ustat() and getmnt()
- *	with struct ustat and struct fs_data.
- */
-/*#define HAS_STRUCT_STATFS_F_FLAGS		/**/
-
-/* HAS_STRUCT_STATFS:
- *	This symbol, if defined, indicates that the struct statfs
- *	to do statfs() is supported.
- */
-/*#define HAS_STRUCT_STATFS	/**/
-
-/* HAS_FSTATVFS:
- *	This symbol, if defined, indicates that the fstatvfs routine is
- *	available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATVFS		/**/
-
-/* HAS_TELLDIR_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the telldir() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern long telldir _((DIR*));
- */
-/*#define	HAS_TELLDIR_PROTO	/**/
-
-/* HAS_USTAT:
- *	This symbol, if defined, indicates that the ustat system call is
- *	available to query file system statistics by dev_t.
- */
-/*#define HAS_USTAT		/**/
-
-/* USE_DYNAMIC_LOADING:
- *	This symbol, if defined, indicates that dynamic loading of
- *	some sort is available.
- */
-/*#define USE_DYNAMIC_LOADING		/**/
-
-/* FFLUSH_NULL:
- *	This symbol, if defined, tells that fflush(NULL) does flush
- *	all pending stdio output.
- */
-/* FFLUSH_ALL:
- *	This symbol, if defined, tells that to flush
- *	all pending stdio output one must loop through all
- *	the stdio file handles stored in an array and fflush them.
- *	Note that if fflushNULL is defined, fflushall will not
- *	even be probed for and will be left undefined.
- */
-#define	FFLUSH_NULL 		/**/
-/*#define	FFLUSH_ALL 		/**/
-
-/* DB_Prefix_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is size_t.
- */
-#define DB_Hash_t	int		/**/
-#define DB_Prefix_t	int  	/**/
-
-/* I_INTTYPES:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <inttypes.h>.
- */
-/*#define   I_INTTYPES                /**/
-
-/* I_MNTENT:
- *	This symbol, if defined, indicates that <mntent.h> exists and
- *	should be included.
- */
-/*#define	I_MNTENT		/**/
-
-/* I_NETINET_TCP:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <netinet/tcp.h>.
- */
-/*#define   I_NETINET_TCP                /**/
-
-/* I_POLL:
- *	This symbol, if defined, indicates that <poll.h> exists and
- *	should be included.
- */
-/*#define	I_POLL		/**/
-
 /* I_SHADOW:
  *	This symbol, if defined, indicates that <shadow.h> exists and
  *	should be included.
@@ -2335,6 +2346,18 @@
  */
 /*#define	I_SOCKS		/**/
 
+/* I_SYSLOG:
+ *	This symbol, if defined, indicates that <syslog.h> exists and
+ *	should be included.
+ */
+#	I_SYSLOG		/**/
+
+/* I_SYSMODE:
+ *	This symbol, if defined, indicates that <sys/mode.h> exists and
+ *	should be included.
+ */
+#	I_SYSMODE		/**/
+
 /* I_SYS_MOUNT:
  *	This symbol, if defined, indicates that <sys/mount.h> exists and
  *	should be included.
@@ -2352,26 +2375,60 @@
  */
 /*#define	I_SYS_STATVFS		/**/
 
+/* I_SYSUIO:
+ *	This symbol, if defined, indicates that <sys/uio.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYSUIO		/**/
+
+/* I_SYSUTSNAME:
+ *	This symbol, if defined, indicates that <sys/utsname.h> exists and
+ *	should be included.
+ */
+#	I_SYSUTSNAME		/**/
+
 /* I_SYS_VFS:
  *	This symbol, if defined, indicates that <sys/vfs.h> exists and
  *	should be included.
  */
 /*#define	I_SYS_VFS		/**/
 
+/* I_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <time.h>.
+ */
+/* I_SYS_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h> with KERNEL defined.
+ */
+/*#define I_TIME		/**/
+#define I_SYS_TIME		/**/
+/*#define I_SYS_TIME_KERNEL		/**/
+
 /* I_USTAT:
  *	This symbol, if defined, indicates that <ustat.h> exists and
  *	should be included.
  */
 /*#define	I_USTAT		/**/
 
-/* HAS_OFF64_T:
- *	This symbol will be defined if the C compiler supports off64_t.
+/* PERL_INC_VERSION_LIST:
+ *	This variable specifies the list of subdirectories in over
+ *	which perl.c:incpush() and lib/lib.pm will automatically
+ *	search when adding directories to @INC, in a format suitable
+ *	for a C initialization string.  See the inc_version_list entry
+ *	in Porting/Glossary for more details.
  */
-/* HAS_FPOS64_T:
- *	This symbol will be defined if the C compiler supports fpos64_t.
+#define PERL_INC_VERSION_LIST 		/**/
+
+/* INSTALL_USR_BIN_PERL:
+ *	This symbol, if defined, indicates that Perl is to be installed
+ * 	also as /usr/bin/perl.
  */
-/*#define	HAS_OFF64_T    		/**/
-/*#define	HAS_FPOS64_T    	/**/
+/*#define INSTALL_USR_BIN_PERL	/**/
 
 /* PERL_PRIfldbl:
  *	This symbol, if defined, contains the string used by stdio to
@@ -2384,6 +2441,92 @@
 #define PERL_PRIfldbl	"Lf"	/**/
 #define PERL_PRIgldbl	"Lg"	/**/
 
+/* Off_t:
+ *	This symbol holds the type used to declare offsets in the kernel.
+ *	It can be int, long, off_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t off_t		/* <offset> type */
+#define LSEEKSIZE 4		/* <offset> size */
+#define Off_t_size 4	/* <offset> size */
+
+/* Free_t:
+ *	This variable contains the return type of free().  It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ *	This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void *			/**/
+#define Free_t void			/**/
+
+/* MYMALLOC:
+ *	This symbol, if defined, indicates that we're using our own malloc.
+ */
+/*#define MYMALLOC			/**/
+
+/* Mode_t:
+ *	This symbol holds the type used to declare file modes 
+ *	for systems calls.  It is usually mode_t, but may be
+ *	int or unsigned short.  It may be necessary to include <sys/types.h>
+ *	to get any typedef'ed information.
+ */
+#define Mode_t mode_t	 /* file mode parameter for system calls */
+
+/* VAL_O_NONBLOCK:
+ *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ *	non-blocking I/O for the file descriptor. Note that there is no way
+ *	back, i.e. you cannot turn it blocking again this way. If you wish to
+ *	alternatively switch between blocking and non-blocking, use the
+ *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ *	This symbol holds the errno error code set by read() when no data was
+ *	present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ *	This symbol holds the return code from read() when no data is present
+ *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ *	not defined, then you can't distinguish between no data and EOF by
+ *	issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ *	This symbol, if defined, indicates to the C program that a read() on
+ *	a non-blocking file descriptor will return 0 on EOF, and not the value
+ *	held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* Netdb_host_t:
+ *	This symbol holds the type used for the 1st argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ *	This symbol holds the type used for the 2nd argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ *	This symbol holds the type used for the argument to
+ *	gethostbyname().
+ */
+/* Netdb_net_t:
+ *	This symbol holds the type used for the 1st argument to
+ *	getnetbyaddr().
+ */
+#define Netdb_host_t		char * /**/
+#define Netdb_hlen_t		int /**/
+#define Netdb_name_t		char * /**/
+#define Netdb_net_t		long /**/
+
 /* IVTYPE:
  *	This symbol defines the C type used for Perl's IV.
  */
@@ -2447,6 +2590,10 @@
 /* U64SIZE:
  *	This symbol contains the sizeof(U64).
  */
+/* NV_PRESERVES_UV:
+ *	This symbol, if defined, indicates that a variable of type NVTYPE
+ *	can preserve all the bit of a variable of type UVSIZE.
+ */
 #define	IVTYPE		int		/**/
 #define	UVTYPE		unsigned int		/**/
 #define	I8TYPE		char		/**/
@@ -2472,6 +2619,7 @@
 #define	I64SIZE		_error_	/**/
 #define	U64SIZE		_error_	/**/
 #endif
+#define	NV_PRESERVES_UV
 
 /* IVdf:
  *	This symbol defines the format string used for printing a Perl IV
@@ -2494,6 +2642,59 @@
 #define	UVof		"o"		/**/
 #define	UVxf		"x"		/**/
 
+/* Pid_t:
+ *	This symbol holds the type used to declare process ids in the kernel.
+ *	It can be int, uint, pid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t pid_t		/* PID type */
+
+/* PRIVLIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ *	This symbol contains the ~name expanded version of PRIVLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "/system/ported/perl/lib/5.005"		/**/
+#define PRIVLIB_EXP "/system/ported/perl/lib/5.005"		/**/
+
+/* PTRSIZE:
+ *	This symbol contains the size of a pointer, so that the C preprocessor
+ *	can make decisions based on it.  It will be sizeof(void *) if
+ *	the compiler supports (void *); otherwise it will be
+ *	sizeof(char *).
+ */
+#define PTRSIZE 4		/**/
+
+/* Drand01:
+ *	This macro is to be used to generate uniformly distributed
+ *	random numbers over the range [0., 1.[.  You may have to supply
+ *	an 'extern double drand48();' in your program since SunOS 4.1.3
+ *	doesn't provide you with anything relevant in it's headers.
+ *	See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ *	This symbol defines the type of the argument of the
+ *	random seed function.
+ */
+/* seedDrand01:
+ *	This symbol defines the macro to be used in seeding the
+ *	random number generator (see Drand01).
+ */
+/* RANDBITS:
+ *	This symbol indicates how many bits are produced by the
+ *	function used to generate normalized random numbers.
+ *	Values include 15, 16, 31, and 48.
+ */
+#define Drand01()		rand()/(RAND_MAX+1)		/**/
+#define Rand_seed_t		unsigned int		/**/
+#define seedDrand01(x)	srand((Rand_seed_t)x)	/**/
+#define RANDBITS		15		/**/
+
 /* SELECT_MIN_BITS:
  *	This symbol holds the minimum number of bits operated by select.
  *	That is, if you do select(n, ...), how many bits at least will be
@@ -2503,6 +2704,99 @@
  */
 #define SELECT_MIN_BITS 	1	/**/
 
+/* Select_fd_set_t:
+ *	This symbol holds the type used for the 2nd, 3rd, and 4th
+ *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
+ *	is defined, and 'int *' otherwise.  This is only useful if you 
+ *	have select(), of course.
+ */
+#define Select_fd_set_t 	fd_set *	/**/
+
+/* SIG_NAME:
+ *	This symbol contains a list of signal names in order of
+ *	signal number. This is intended
+ *	to be used as a static array initialization, like this:
+ *		char *sig_name[] = { SIG_NAME };
+ *	The signals in the list are separated with commas, and each signal
+ *	is surrounded by double quotes. There is no leading SIG in the signal
+ *	name, i.e. SIGQUIT is known as "QUIT".
+ *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ *	etc., where nn is the actual signal number (e.g. NUM37).
+ *	The signal number for sig_name[i] is stored in sig_num[i].
+ *	The last element is 0 to terminate the list with a NULL.  This
+ *	corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ *	This symbol contains a list of signal numbers, in the same order as the
+ *	SIG_NAME list. It is suitable for static array initialization, as in:
+ *		int sig_num[] = { SIG_NUM };
+ *	The signals in the list are separated with commas, and the indices
+ *	within that list and the SIG_NAME list match, so it's easy to compute
+ *	the signal name from a number or vice versa at the price of a small
+ *	dynamic linear lookup. 
+ *	Duplicates are allowed, but are moved to the end of the list.
+ *	The signal number corresponding to sig_name[i] is sig_number[i].
+ *	if (i < NSIG) then sig_number[i] == i.  
+ *	The last element is 0, corresponding to the 0 at the end of
+ *	the sig_name list.
+ */
+#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0		/**/
+#define SIG_NUM  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0		/**/
+
+/* SITEARCH:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-dependent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ *	This symbol contains the ~name expanded version of SITEARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH ""		/**/
+#define SITEARCH_EXP ""		/**/
+
+/* SITELIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-independent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ *	This symbol contains the ~name expanded version of SITELIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB "/system/ported/perl/lib/site/5.005"		/**/
+#define SITELIB_EXP "/system/ported/perl/lib/site/5.005"		/**/
+
+/* Size_t:
+ *	This symbol holds the type used to declare length parameters
+ *	for string functions.  It is usually size_t, but may be
+ *	unsigned long, int, etc.  It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t	 /* length paramater for string functions */
+
+/* SSize_t:
+ *	This symbol holds the type used by functions that return
+ *	a count of bytes or an error condition.  It must be a signed type.
+ *	It is usually ssize_t, but may be long or int, etc.
+ *	It may be necessary to include <sys/types.h> or <unistd.h>
+ *	to get any typedef'ed information.
+ *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t	 /* signed count of bytes */
+
 /* STARTPERL:
  *	This variable contains the string to put in front of a perl
  *	script to make sure (one hopes) that it runs with perl and not
@@ -2521,25 +2815,52 @@
 #define	HAS_STDIO_STREAM_ARRAY	/**/
 #define STDIO_STREAM_ARRAY	_iob
 
-/* HAS_STRTOULL:
- *	This symbol, if defined, indicates that the strtoull routine is
- *	available to convert strings into unsigned long longs.
+/* Uid_t_f:
+ *	This symbol defines the format string used for printing a Uid_t.
  */
-/*#define HAS_STRTOULL		/**/
+#define	Uid_t_f		"d"		/**/
+
+/* Uid_t_size:
+ *	This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4		/* UID size */
 
-/* USE_64_BITS:
+/* Uid_t:
+ *	This symbol holds the type used to declare user ids in the kernel.
+ *	It can be int, ushort, uid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t		/* UID type */
+
+/* USE_64_BIT_INT:
  *	This symbol, if defined, indicates that 64-bit integers should
  *	be used when available.  If not defined, the native integers
- *	will be used (be they 32 or 64 bits).
+ *	will be employed (be they 32 or 64 bits).  The minimal possible
+ *	64-bitness is used, just enough to get 64-bit integers into Perl.
+ *	This may mean using for example "long longs", while your memory
+ *	may still be limited to 2 gigabytes.
  */
-#ifndef USE_64_BITS
-/*#define	USE_64_BITS		/**/
+/* USE_64_BIT_ALL:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be used (be they 32 or 64 bits).  The maximal possible
+ *	64-bitness is employed: LP64 or ILP64, meaning that you will
+ *	be able to use more than 2 gigabytes of memory.  This mode is
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
+ *	be able to run the resulting executable in a 32-bit CPU at all or
+ *	you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define	USE_64_BIT_INT		/**/
+#endif
+
+#ifndef USE_64_BIT_ALL
+/*#define	USE_64_BIT_ALL		/**/
 #endif
 
 /* USE_LARGE_FILES:
  *	This symbol, if defined, indicates that large file support
- *	should be used when available.  The USE_64_BITS symbol will
- *	also be turned on if necessary.
+ *	should be used when available.
  */
 #ifndef USE_LARGE_FILES
 /*#define	USE_LARGE_FILES		/**/
@@ -2553,6 +2874,10 @@
 #define	USE_LONG_DOUBLE		/**/
 #endif
 
+/* USE_MORE_BITS:
+ *	This symbol, if defined, indicates that 64-bit interfaces and
+ *	long doubles should be used when available.
+ */
 #ifndef USE_MORE_BITS
 /*#define	USE_MORE_BITS		/**/
 #endif
@@ -2582,6 +2907,56 @@
 /*#define	USE_SOCKS		/**/
 #endif
 
+/* USE_ITHREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the 5.005-based threading implementation.
+ */
+/* OLD_PTHREADS_API:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built to use the old draft POSIX threads API.
+ */
+/*#define	USE_5005THREADS		/**/
+#	USE_ITHREADS		/**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define		USE_THREADS		/* until src is revised*/
+#endif
+/*#define	OLD_PTHREADS_API		/**/
+
+/* PERL_VENDORLIB_EXP:
+ *	This symbol contains the ~name expanded version of VENDORLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PERL_VENDORLIB_EXP ""		/**/
+
+/* VOIDFLAGS:
+ *	This symbol indicates how much support of the void type is given by this
+ *	compiler.  What various bits mean:
+ *
+ *	    1 = supports declaration of void
+ *	    2 = supports arrays of pointers to functions returning void
+ *	    4 = supports comparisons between pointers to void functions and
+ *		    addresses of void functions
+ *	    8 = suports declaration of generic void pointers
+ *
+ *	The package designer should define VOIDUSED to indicate the requirements
+ *	of the package.  This can be done either by #defining VOIDUSED before
+ *	including config.h, or by defining defvoidused in Myinit.U.  If the
+ *	latter approach is taken, only those flags will be tested.  If the
+ *	level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int		/* is void to be avoided? */
+#define M_VOID			/* Xenix strikes again */
+#endif
+
 /* PERL_XS_APIVERSION:
  *	This variable contains the version of the oldest perl binary
  *	compatible with the present perl.  perl.c:incpush() and
@@ -2614,233 +2989,27 @@
  *	(presumably) be similar.
  *	See the INSTALL file for how this works.
  */
-#define PERL_XS_APIVERSION 5.00563 /* Change to string for tuples?*/
-#define PERL_PM_APIVERSION 5.00563 /* Change to string for tuples?*/
-
-/* HAS_DRAND48_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the drand48() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern double drand48 _((void));
- */
-/*#define	HAS_DRAND48_PROTO	/**/
-
-/* HAS_GETHOST_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for gethostent(), gethostbyname(), and
- *	gethostbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETHOST_PROTOS	/**/
-
-/* HAS_GETNET_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getnetent(), getnetbyname(), and
- *	getnetbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETNET_PROTOS	/**/
-
-/* HAS_GETPROTO_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getprotoent(), getprotobyname(), and
- *	getprotobyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETPROTO_PROTOS	/**/
-
-/* HAS_GETSERV_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getservent(), getservbyname(), and
- *	getservbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETSERV_PROTOS	/**/
-
-/* Netdb_host_t:
- *	This symbol holds the type used for the 1st argument
- *	to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- *	This symbol holds the type used for the 2nd argument
- *	to gethostbyaddr().
- */
-/* Netdb_name_t:
- *	This symbol holds the type used for the argument to
- *	gethostbyname().
- */
-/* Netdb_net_t:
- *	This symbol holds the type used for the 1st argument to
- *	getnetbyaddr().
- */
-#define Netdb_host_t		char * /**/
-#define Netdb_hlen_t		int /**/
-#define Netdb_name_t		char * /**/
-#define Netdb_net_t		long /**/
-
-/* Select_fd_set_t:
- *	This symbol holds the type used for the 2nd, 3rd, and 4th
- *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
- *	is defined, and 'int *' otherwise.  This is only useful if you 
- *	have select(), of course.
- */
-#define Select_fd_set_t 	fd_set *	/**/
-
-/* ARCHNAME:
- *	This symbol holds a string representing the architecture name.
- *	It may be used to construct an architecture-dependant pathname
- *	where library files may be held under a private library, for
- *	instance.
- */
-#define ARCHNAME "vos"		/**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- *	This symbol, if defined, indicates how to create pthread
- *	in joinable (aka undetached) state.  NOTE: not defined
- *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- *	(the new version of the constant).
- *	If defined, known values are PTHREAD_CREATE_UNDETACHED
- *	and __UNDETACHED.
- */
-/*#define OLD_PTHREAD_CREATE_JOINABLE  /**/
-
-/* HAS_PTHREAD_YIELD:
- *	This symbol, if defined, indicates that the pthread_yield 
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- *	This symbol defines the way to yield the execution of
- *	the current thread.  Known ways are sched_yield,
- *	pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- *	This symbol, if defined, indicates that the sched_yield
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-/*#define HAS_PTHREAD_YIELD	/**/
-#define SCHED_YIELD		/**/
-/*#define HAS_SCHED_YIELD	/**/
+#define PERL_XS_APIVERSION "5.00563"
+#define PERL_PM_APIVERSION "5.00563"
 
-/* I_MACH_CTHREADS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <mach/cthreads.h>.
+/* HAS_GETFSSTAT:
+ *	This symbol, if defined, indicates that the getfsstat routine is
+ *	available to stat filesystems in bulk.
  */
-/*#define   I_MACH_CTHREADS	/**/
+/*#define HAS_GETFSSTAT		/**/
 
-/* I_PTHREAD:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <pthread.h>.
- */
-/*#define   I_PTHREAD	/**/
-
-/* USE_THREADS:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use threads.
- */
-/* OLD_PTHREADS_API:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use the old draft POSIX threads API.
- */
-#ifndef USE_TTHREADS
-/*#define	USE_THREADS		/**/
-#endif
-/*#define	OLD_PTHREADS_API		/**/
-
-/* Time_t:
- *	This symbol holds the type returned by time(). It can be long,
- *	or time_t on BSD sites (in which case <sys/types.h> should be
- *	included).
- */
-#define Time_t time_t		/* Time type */
-
-/* HAS_TIMES:
- *	This symbol, if defined, indicates that the times() routine exists.
- *	Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES		/**/
-
-/* Fpos_t:
- *	This symbol holds the type used to declare file positions in libc.
- *	It can be fpos_t, long, uint, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t		/* File position type */
-
-/* Gid_t_f:
- *	This symbol defines the format string used for printing a Gid_t.
- */
-#define	Gid_t_f		"d"		/**/
-
-/* Gid_t_size:
- *	This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4		/* GID size */
-
-/* Gid_t:
- *	This symbol holds the return type of getgid() and the type of
- *	argument to setrgid() and related functions.  Typically,
- *	it is the type of group ids in the kernel. It can be int, ushort,
- *	uid_t, etc... It may be necessary to include <sys/types.h> to get
- *	any typedef'ed information.
- */
-#define Gid_t gid_t		/* Type for getgid(), etc... */
-
-/* Off_t:
- *	This symbol holds the type used to declare offsets in the kernel.
- *	It can be int, long, off_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t off_t		/* <offset> type */
-#define LSEEKSIZE 4		/* <offset> size */
-#define Off_t_size 4	/* <offset> size */
-
-/* Mode_t:
- *	This symbol holds the type used to declare file modes 
- *	for systems calls.  It is usually mode_t, but may be
- *	int or unsigned short.  It may be necessary to include <sys/types.h>
- *	to get any typedef'ed information.
- */
-#define Mode_t mode_t	 /* file mode parameter for system calls */
-
-/* Pid_t:
- *	This symbol holds the type used to declare process ids in the kernel.
- *	It can be int, uint, pid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t pid_t		/* PID type */
-
-/* Size_t:
- *	This symbol holds the type used to declare length parameters
- *	for string functions.  It is usually size_t, but may be
- *	unsigned long, int, etc.  It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t	 /* length paramater for string functions */
-
-/* Uid_t_f:
- *	This symbol defines the format string used for printing a Uid_t.
- */
-#define	Uid_t_f		"d"		/**/
-
-/* Uid_t_size:
- *	This symbol holds the size of a Uid_t in bytes.
+/* HAS_LSEEK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the lseek() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern off_t lseek(int, off_t, int);
  */
-#define Uid_t_size 4		/* UID size */
+#define	HAS_LSEEK_PROTO	/**/
 
-/* Uid_t:
- *	This symbol holds the type used to declare user ids in the kernel.
- *	It can be int, ushort, uid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
+/* Sock_size_t:
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
-#define Uid_t uid_t		/* UID type */
+#define Sock_size_t		int /**/
 
 #endif
diff --git a/vos/config_h.SH_orig b/vos/config_h.SH_orig
index 07c6a079b3..ad136f26db 100755
--- a/vos/config_h.SH_orig
+++ b/vos/config_h.SH_orig
@@ -376,6 +376,18 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_mktime HAS_MKTIME		/**/
 
+/* HAS_MSYNC:
+ *	This symbol, if defined, indicates that the msync system call is
+ *	available to synchronize a mapped file.
+ */
+#$d_msync HAS_MSYNC		/**/
+
+/* HAS_MUNMAP:
+ *	This symbol, if defined, indicates that the munmap system call is
+ *	available to unmap a region, usually mapped by mmap().
+ */
+#$d_munmap HAS_MUNMAP		/**/
+
 /* HAS_NICE:
  *	This symbol, if defined, indicates that the nice routine is
  *	available.
@@ -998,6 +1010,37 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define STDCHAR $stdchar	/**/
 
+/* CROSSCOMPILE:
+ *	This symbol, if defined, signifies that we our
+ *	build process is a cross-compilation.
+ */
+#$crosscompile CROSSCOMPILE		/**/
+
+/* INTSIZE:
+ *	This symbol contains the value of sizeof(int) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ *	This symbol contains the value of sizeof(long) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ *	This symbol contains the value of sizeof(short) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+#define INTSIZE $intsize		/**/
+#define LONGSIZE $longsize		/**/
+#define SHORTSIZE $shortsize		/**/
+
+/* MULTIARCH:
+ *	This symbol, if defined, signifies that the build
+ *	process will produce some binary files that are going to be
+ *	used in a cross-platform environment.  This is the case for
+ *	example with the NeXT "fat" binaries that contain executables
+ *	for several CPUs.
+ */
+#$multiarch MULTIARCH		/**/
+
 /* HAS_QUAD:
  *	This symbol, if defined, tells that there's a 64-bit integer type,
  *	Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
@@ -1038,41 +1081,17 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$i_syssecrt   I_SYS_SECURITY	/**/
 
-/* CROSSCOMPILE:
- *	This symbol, if defined, signifies that we our
- *	build process is a cross-compilation.
- */
-#$crosscompile CROSSCOMPILE		/**/
-
-/* INTSIZE:
- *	This symbol contains the value of sizeof(int) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- *	This symbol contains the value of sizeof(long) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- *	This symbol contains the value of sizeof(short) so that the C
- *	preprocessor can make decisions based on it.
- */
-#define INTSIZE $intsize		/**/
-#define LONGSIZE $longsize		/**/
-#define SHORTSIZE $shortsize		/**/
-
-/* MULTIARCH:
- *	This symbol, if defined, signifies that the build
- *	process will produce some binary files that are going to be
- *	used in a cross-platform environment.  This is the case for
- *	example with the NeXT "fat" binaries that contain executables
- *	for several CPUs.
+/* OSNAME:
+ *	This symbol contains the name of the operating system, as determined
+ *	by Configure.  You shouldn't rely on it too much; the specific
+ *	feature tests from Configure are generally more reliable.
  */
-#$multiarch MULTIARCH		/**/
+#define OSNAME "$osname"		/**/
 
 /* MEM_ALIGNBYTES:
  *	This symbol contains the number of bytes required to align a
- *	double. Usual values are 2, 4 and 8. The default is eight,
- *	for safety.
+ *	double, or a long double when applicable. Usual values are 2,
+ *	4 and 8. The default is eight, for safety.
  */
 #if defined(CROSSCOMPILE) || defined(MULTIARCH)
 #  define MEM_ALIGNBYTES 8
@@ -1080,6 +1099,61 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define MEM_ALIGNBYTES $alignbytes
 #endif
 
+/* ARCHLIB:
+ *	This variable, if defined, holds the name of the directory in
+ *	which the user wants to put architecture-dependent public
+ *	library files for $package.  It is most often a local directory
+ *	such as /usr/local/lib.  Programs using this variable must be
+ *	prepared to deal with filename expansion.  If ARCHLIB is the
+ *	same as PRIVLIB, it is not defined, since presumably the
+ *	program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ *	This symbol contains the ~name expanded version of ARCHLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#$d_archlib ARCHLIB "$archlib"		/**/
+#$d_archlib ARCHLIB_EXP "$archlibexp"		/**/
+
+/* ARCHNAME:
+ *	This symbol holds a string representing the architecture name.
+ *	It may be used to construct an architecture-dependant pathname
+ *	where library files may be held under a private library, for
+ *	instance.
+ */
+#define ARCHNAME "$archname"		/**/
+
+/* HAS_ATOLF:
+ *	This symbol, if defined, indicates that the atolf routine is
+ *	available to convert strings into long doubles.
+ */
+#$d_atolf HAS_ATOLF		/**/
+
+/* HAS_ATOLL:
+ *	This symbol, if defined, indicates that the atoll routine is
+ *	available to convert strings into long longs.
+ */
+#$d_atoll HAS_ATOLL		/**/
+
+/* BIN:
+ *	This symbol holds the path of the bin directory where the package will
+ *	be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ *	This symbol is the filename expanded version of the BIN symbol, for
+ *	programs that do not want to deal with that at run-time.
+ */
+#define BIN "$bin"	/**/
+#define BIN_EXP "$binexp"	/**/
+
+/* PERL_BINCOMPAT_5005:
+ *	This symbol, if defined, indicates that Perl 5.006 should be
+ *	binary-compatible with Perl 5.005.  This is impossible for builds
+ *	that use features like threads and multiplicity it is always $undef
+ *	for those versions.
+ */
+#$d_bincompat5005 PERL_BINCOMPAT_5005			/**/
+
 /* BYTEORDER:
  *	This symbol holds the hexadecimal constant defined in byteorder,
  *	i.e. 0x1234 or 0x4321, etc...
@@ -1123,406 +1197,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define BYTEORDER 0x$byteorder	/* large digits for MSB */
 #endif /* NeXT */
 
-/* CASTI32:
- *	This symbol is defined if the C compiler can cast negative
- *	or large floating point numbers to 32-bit ints.
- */
-#$d_casti32	CASTI32		/**/
-
-/* CASTNEGFLOAT:
- *	This symbol is defined if the C compiler can cast negative
- *	numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- *	This symbol contains flags that say what difficulties the compiler
- *	has casting odd floating values to unsigned long:
- *		0 = ok
- *		1 = couldn't cast < 0
- *		2 = couldn't cast >= 0x80000000
- *		4 = couldn't cast in argument expression list
- */
-#$d_castneg	CASTNEGFLOAT		/**/
-#define CASTFLAGS $castflags		/**/
-
-/* VOID_CLOSEDIR:
- *	This symbol, if defined, indicates that the closedir() routine
- *	does not return a value.
- */
-#$d_void_closedir VOID_CLOSEDIR		/**/
-
-/* HAS_FD_SET:
- *	This symbol, when defined, indicates presence of the fd_set typedef
- *	in <sys/types.h>
- */
-#$d_fd_set HAS_FD_SET	/**/
-
-/* Gconvert:
- *	This preprocessor macro is defined to convert a floating point
- *	number to a string without a trailing decimal point.  This
- *	emulates the behavior of sprintf("%g"), but is sometimes much more
- *	efficient.  If gconvert() is not available, but gcvt() drops the
- *	trailing decimal point, then gcvt() is used.  If all else fails,
- *	a macro using sprintf("%g") is used. Arguments for the Gconvert
- *	macro are: value, number of digits, whether trailing zeros should
- *	be retained, and the output buffer.
- *	Possible values are:
- *		d_Gconvert='gconvert((x),(n),(t),(b))'
- *		d_Gconvert='gcvt((x),(n),(b))'
- *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- *	The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) $d_Gconvert
-
-/* HAS_GNULIBC:
- *	This symbol, if defined, indicates to the C program that 
- *	the GNU C library is being used.
- */
-#$d_gnulibc HAS_GNULIBC  	/**/
-/* HAS_ISASCII:
- *	This manifest constant lets the C program know that isascii 
- *	is available.
- */
-#$d_isascii HAS_ISASCII		/**/
-
-/* HAS_LCHOWN:
- *	This symbol, if defined, indicates that the lchown routine is
- *	available to operate on a symbolic link (instead of following the
- *	link).
- */
-#$d_lchown HAS_LCHOWN		/**/
-
-/* HAS_OPEN3:
- *	This manifest constant lets the C program know that the three
- *	argument form of open(2) is available.
- */
-#$d_open3 HAS_OPEN3		/**/
-
-/* HAS_SAFE_BCOPY:
- *	This symbol, if defined, indicates that the bcopy routine is available
- *	to copy potentially overlapping memory blocks. Otherwise you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-#$d_safebcpy HAS_SAFE_BCOPY	/**/
-
-/* HAS_SAFE_MEMCPY:
- *	This symbol, if defined, indicates that the memcpy routine is available
- *	to copy potentially overlapping memory blocks. Otherwise you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-#$d_safemcpy HAS_SAFE_MEMCPY	/**/
-
-/* HAS_SANE_MEMCMP:
- *	This symbol, if defined, indicates that the memcmp routine is available
- *	and can be used to compare relative magnitudes of chars with their high
- *	bits set.  If it is not defined, roll your own version.
- */
-#$d_sanemcmp HAS_SANE_MEMCMP	/**/
-
-/* HAS_SIGACTION:
- *	This symbol, if defined, indicates that Vr4's sigaction() routine
- *	is available.
- */
-#$d_sigaction HAS_SIGACTION	/**/
-
-/* HAS_SIGSETJMP:
- *	This variable indicates to the C program that the sigsetjmp()
- *	routine is available to save the calling process's registers
- *	and stack environment for later use by siglongjmp(), and
- *	to optionally save the process's signal mask.  See
- *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- *	This macro is used in the same way as sigsetjmp(), but will invoke
- *	traditional setjmp() if sigsetjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- *	This macro is used in the same way as siglongjmp(), but will invoke
- *	traditional longjmp() if siglongjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-#$d_sigsetjmp HAS_SIGSETJMP	/**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_STDIO_PTR:
- *	This symbol is defined if the _ptr and _cnt fields (or similar)
- *	of the stdio FILE structure can be used to access the stdio buffer
- *	for a file handle.  If this is defined, then the FILE_ptr(fp)
- *	and FILE_cnt(fp) macros will also be defined and should be used
- *	to access these fields.
- */
-/* FILE_ptr:
- *	This macro is used to access the _ptr field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- *	This symbol is defined if the FILE_ptr macro can be used as an
- *	lvalue.
- */
-/* FILE_cnt:
- *	This macro is used to access the _cnt field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- *	This symbol is defined if the FILE_cnt macro can be used as an
- *	lvalue.
- */
-#$d_stdstdio USE_STDIO_PTR 	/**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp)	$stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE 		/**/
-#define FILE_cnt(fp)	$stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE 		/**/
-#endif
-
-/* USE_STDIO_BASE:
- *	This symbol is defined if the _base field (or similar) of the
- *	stdio FILE structure can be used to access the stdio buffer for
- *	a file handle.  If this is defined, then the FILE_base(fp) macro
- *	will also be defined and should be used to access this field.
- *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
- *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
- *	will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- *	This macro is used to access the _base field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- *	This macro is used to determine the number of bytes in the I/O
- *	buffer pointed to by _base field (or equivalent) of the FILE
- *	structure pointed to its argument. This macro will always be defined
- *	if USE_STDIO_BASE is defined.
- */
-#$d_stdiobase USE_STDIO_BASE 	/**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp)	$stdio_base
-#define FILE_bufsiz(fp)	$stdio_bufsiz
-#endif
-
-/* HAS_VPRINTF:
- *	This symbol, if defined, indicates that the vprintf routine is available
- *	to printf with a pointer to an argument list.  If unavailable, you
- *	may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- *	This symbol is defined if this system has vsprintf() returning type
- *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
- *	is up to the package author to declare vsprintf correctly based on the
- *	symbol.
- */
-#$d_vprintf HAS_VPRINTF	/**/
-#$d_charvspr USE_CHAR_VSPRINTF 	/**/
-
-/* DOUBLESIZE:
- *	This symbol contains the size of a double, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define DOUBLESIZE $doublesize		/**/
-
-/* I_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <time.h>.
- */
-/* I_SYS_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h> with KERNEL defined.
- */
-#$i_time I_TIME		/**/
-#$i_systime I_SYS_TIME		/**/
-#$i_systimek I_SYS_TIME_KERNEL		/**/
-
-/* VAL_O_NONBLOCK:
- *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- *	non-blocking I/O for the file descriptor. Note that there is no way
- *	back, i.e. you cannot turn it blocking again this way. If you wish to
- *	alternatively switch between blocking and non-blocking, use the
- *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- *	This symbol holds the errno error code set by read() when no data was
- *	present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- *	This symbol holds the return code from read() when no data is present
- *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- *	not defined, then you can't distinguish between no data and EOF by
- *	issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- *	This symbol, if defined, indicates to the C program that a read() on
- *	a non-blocking file descriptor will return 0 on EOF, and not the value
- *	held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
-
-/* PTRSIZE:
- *	This symbol contains the size of a pointer, so that the C preprocessor
- *	can make decisions based on it.  It will be sizeof(void *) if
- *	the compiler supports (void *); otherwise it will be
- *	sizeof(char *).
- */
-#define PTRSIZE $ptrsize		/**/
-
-/* Drand01:
- *	This macro is to be used to generate uniformly distributed
- *	random numbers over the range [0., 1.[.  You may have to supply
- *	an 'extern double drand48();' in your program since SunOS 4.1.3
- *	doesn't provide you with anything relevant in it's headers.
- *	See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- *	This symbol defines the type of the argument of the
- *	random seed function.
- */
-/* seedDrand01:
- *	This symbol defines the macro to be used in seeding the
- *	random number generator (see Drand01).
- */
-/* RANDBITS:
- *	This symbol indicates how many bits are produced by the
- *	function used to generate normalized random numbers.
- *	Values include 15, 16, 31, and 48.
- */
-#define Drand01()		$drand01		/**/
-#define Rand_seed_t		$randseedtype		/**/
-#define seedDrand01(x)	$seedfunc((Rand_seed_t)x)	/**/
-#define RANDBITS		$randbits		/**/
-
-/* SSize_t:
- *	This symbol holds the type used by functions that return
- *	a count of bytes or an error condition.  It must be a signed type.
- *	It is usually ssize_t, but may be long or int, etc.
- *	It may be necessary to include <sys/types.h> or <unistd.h>
- *	to get any typedef'ed information.
- *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t $ssizetype	 /* signed count of bytes */
-
-/* EBCDIC:
- *     This symbol, if defined, indicates that this system uses
- *	EBCDIC encoding.
- */
-#$ebcdic	EBCDIC 		/**/
-
-/* ARCHLIB:
- *	This variable, if defined, holds the name of the directory in
- *	which the user wants to put architecture-dependent public
- *	library files for $package.  It is most often a local directory
- *	such as /usr/local/lib.  Programs using this variable must be
- *	prepared to deal with filename expansion.  If ARCHLIB is the
- *	same as PRIVLIB, it is not defined, since presumably the
- *	program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- *	This symbol contains the ~name expanded version of ARCHLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_archlib ARCHLIB "$archlib"		/**/
-#$d_archlib ARCHLIB_EXP "$archlibexp"		/**/
-
-/* BIN:
- *	This symbol holds the path of the bin directory where the package will
- *	be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- *	This symbol is the filename expanded version of the BIN symbol, for
- *	programs that do not want to deal with that at run-time.
- */
-#define BIN "$bin"	/**/
-#define BIN_EXP "$binexp"	/**/
-
-/* INSTALL_USR_BIN_PERL:
- *	This symbol, if defined, indicates that Perl is to be installed
- * 	also as /usr/bin/perl.
- */
-#$installusrbinperl INSTALL_USR_BIN_PERL	/**/
-
-/* PRIVLIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- *	This symbol contains the ~name expanded version of PRIVLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "$privlib"		/**/
-#define PRIVLIB_EXP "$privlibexp"		/**/
-
-/* SITEARCH:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-dependent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITEARCH_EXP:
- *	This symbol contains the ~name expanded version of SITEARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_sitearch SITEARCH "$sitearch"		/**/
-#$d_sitearch SITEARCH_EXP "$sitearchexp"		/**/
-
-/* SITELIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-independent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITELIB_EXP:
- *	This symbol contains the ~name expanded version of SITELIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITELIB "$sitelib"		/**/
-#define SITELIB_EXP "$sitelibexp"		/**/
-
-/* PERL_VENDORLIB_EXP:
- *	This symbol contains the ~name expanded version of VENDORLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp"		/**/
-
-/* OSNAME:
- *	This symbol contains the name of the operating system, as determined
- *	by Configure.  You shouldn't rely on it too much; the specific
- *	feature tests from Configure are generally more reliable.
- */
-#define OSNAME "$osname"		/**/
-
 /* CAT2:
  *	This macro catenates 2 tokens together.
  */
@@ -1580,6 +1254,33 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_access HAS_ACCESS		/**/
 
+/* CASTI32:
+ *	This symbol is defined if the C compiler can cast negative
+ *	or large floating point numbers to 32-bit ints.
+ */
+#$d_casti32	CASTI32		/**/
+
+/* CASTNEGFLOAT:
+ *	This symbol is defined if the C compiler can cast negative
+ *	numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ *	This symbol contains flags that say what difficulties the compiler
+ *	has casting odd floating values to unsigned long:
+ *		0 = ok
+ *		1 = couldn't cast < 0
+ *		2 = couldn't cast >= 0x80000000
+ *		4 = couldn't cast in argument expression list
+ */
+#$d_castneg	CASTNEGFLOAT		/**/
+#define CASTFLAGS $castflags		/**/
+
+/* VOID_CLOSEDIR:
+ *	This symbol, if defined, indicates that the closedir() routine
+ *	does not return a value.
+ */
+#$d_void_closedir VOID_CLOSEDIR		/**/
+
 /* HAS_CSH:
  *	This symbol, if defined, indicates that the C-shell exists.
  */
@@ -1591,6 +1292,22 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define CSH "$full_csh"	/**/
 #endif
 
+/* DLSYM_NEEDS_UNDERSCORE:
+ *	This symbol, if defined, indicates that we need to prepend an
+ *	underscore to the symbol name before calling dlsym().  This only
+ *	makes sense if you *have* dlsym, which we will presume is the
+ *	case if you're using dl_dlopen.xs.
+ */
+#$d_dlsymun 	DLSYM_NEEDS_UNDERSCORE 	/**/
+
+/* HAS_DRAND48_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the drand48() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern double drand48 _((void));
+ */
+#$d_drand48proto	HAS_DRAND48_PROTO	/**/
+
 /* HAS_ENDGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for finalizing sequential access of the group database.
@@ -1627,6 +1344,70 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_endsent HAS_ENDSERVENT		/**/
 
+/* HAS_ENDSPENT:
+ *	This symbol, if defined, indicates that the endspent system call is
+ *	available to finalize the scan of SysV shadow password entries.
+ */
+#$d_endspent HAS_ENDSPENT		/**/
+
+/* HAS_FD_SET:
+ *	This symbol, when defined, indicates presence of the fd_set typedef
+ *	in <sys/types.h>
+ */
+#$d_fd_set HAS_FD_SET	/**/
+
+/* HAS_FPOS64_T:
+ *	This symbol will be defined if the C compiler supports fpos64_t.
+ */
+#$d_fpos64_t	HAS_FPOS64_T    	/**/
+
+/* HAS_STRUCT_FS_DATA:
+ *	This symbol, if defined, indicates that the struct fs_data
+ *	to do statfs() is supported.
+ */
+#$d_fs_data_s HAS_STRUCT_FS_DATA	/**/
+
+/* HAS_FSEEKO:
+ *	This symbol, if defined, indicates that the fseeko routine is
+ *	available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_fseeko HAS_FSEEKO		/**/
+
+/* HAS_FSTATFS:
+ *	This symbol, if defined, indicates that the fstatfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+#$d_fstatfs HAS_FSTATFS		/**/
+
+/* HAS_FTELLO:
+ *	This symbol, if defined, indicates that the ftello routine is
+ *	available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_ftello HAS_FTELLO		/**/
+
+/* Gconvert:
+ *	This preprocessor macro is defined to convert a floating point
+ *	number to a string without a trailing decimal point.  This
+ *	emulates the behavior of sprintf("%g"), but is sometimes much more
+ *	efficient.  If gconvert() is not available, but gcvt() drops the
+ *	trailing decimal point, then gcvt() is used.  If all else fails,
+ *	a macro using sprintf("%g") is used. Arguments for the Gconvert
+ *	macro are: value, number of digits, whether trailing zeros should
+ *	be retained, and the output buffer.
+ *	Possible values are:
+ *		d_Gconvert='gconvert((x),(n),(t),(b))'
+ *		d_Gconvert='gcvt((x),(n),(b))'
+ *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ *	The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) $d_Gconvert
+
+/* HAS_GETCWD:
+ *	This symbol, if defined, indicates that the getcwd routine is
+ *	available to get the current working directory.
+ */
+#$d_getcwd HAS_GETCWD		/**/
+
 /* HAS_GETGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for sequential access of the group database.
@@ -1675,11 +1456,31 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_gethname HAS_GETHOSTNAME	/**/
 #$d_uname HAS_UNAME		/**/
-#$d_phostname HAS_PHOSTNAME		/**/
+#$d_phostname HAS_PHOSTNAME	/**/
 #ifdef HAS_PHOSTNAME
 #define PHOSTNAME "$aphostname"	/* How to get the host name */
 #endif
 
+/* HAS_GETHOST_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for gethostent(), gethostbyname(), and
+ *	gethostbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_gethostprotos	HAS_GETHOST_PROTOS	/**/
+
+/* HAS_GETMNT:
+ *	This symbol, if defined, indicates that the getmnt routine is
+ *	available to get filesystem mount info by filename.
+ */
+#$d_getmnt HAS_GETMNT		/**/
+
+/* HAS_GETMNTENT:
+ *	This symbol, if defined, indicates that the getmntent routine is
+ *	available to iterate through mounted file systems to get their info.
+ */
+#$d_getmntent HAS_GETMNTENT		/**/
+
 /* HAS_GETNETBYADDR:
  *	This symbol, if defined, indicates that the getnetbyaddr() routine is
  *	available to look up networks by their IP addresses.
@@ -1698,6 +1499,14 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_getnent HAS_GETNETENT		/**/
 
+/* HAS_GETNET_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getnetent(), getnetbyname(), and
+ *	getnetbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_getnetprotos	HAS_GETNET_PROTOS	/**/
+
 /* HAS_GETPROTOENT:
  *	This symbol, if defined, indicates that the getprotoent() routine is
  *	available to look up protocols in some data base or another.
@@ -1715,6 +1524,14 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_getpbyname HAS_GETPROTOBYNAME		/**/
 #$d_getpbynumber HAS_GETPROTOBYNUMBER		/**/
 
+/* HAS_GETPROTO_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getprotoent(), getprotobyname(), and
+ *	getprotobyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_getprotoprotos	HAS_GETPROTO_PROTOS	/**/
+
 /* HAS_GETPWENT:
  *	This symbol, if defined, indicates that the getpwent routine is
  *	available for sequential access of the passwd database.
@@ -1728,6 +1545,26 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_getsent HAS_GETSERVENT		/**/
 
+/* HAS_GETSERV_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getservent(), getservbyname(), and
+ *	getservbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_getservprotos	HAS_GETSERV_PROTOS	/**/
+
+/* HAS_GETSPENT:
+ *	This symbol, if defined, indicates that the getspent system call is
+ *	available to retrieve SysV shadow password entries sequentially.
+ */
+#$d_getspent HAS_GETSPENT		/**/
+
+/* HAS_GETSPNAM:
+ *	This symbol, if defined, indicates that the getspnam system call is
+ *	available to retrieve SysV shadow password entries by name.
+ */
+#$d_getspnam HAS_GETSPNAM		/**/
+
 /* HAS_GETSERVBYNAME:
  *	This symbol, if defined, indicates that the getservbyname()
  *	routine is available to look up services by their name.
@@ -1739,6 +1576,20 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_getsbyname HAS_GETSERVBYNAME		/**/
 #$d_getsbyport HAS_GETSERVBYPORT		/**/
 
+/* HAS_GNULIBC:
+ *	This symbol, if defined, indicates to the C program that 
+ *	the GNU C library is being used.
+ */
+#$d_gnulibc HAS_GNULIBC  	/**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+#   define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ *	This symbol, if defined, indicates that the hasmntopt routine is
+ *	available to query the mount options of file systems.
+ */
+#$d_hasmntopt HAS_HASMNTOPT		/**/
+
 /* HAS_HTONL:
  *	This symbol, if defined, indicates that the htonl() routine (and
  *	friends htons() ntohl() ntohs()) are available to do network
@@ -1764,6 +1615,40 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_htonl HAS_NTOHL		/**/
 #$d_htonl HAS_NTOHS		/**/
 
+/* HAS_ICONV:
+ *	This symbol, if defined, indicates that the iconv routine is
+ *	available to do character set conversions.
+ */
+#$d_iconv HAS_ICONV		/**/
+
+/* HAS_INT64_T:
+ *     This symbol will defined if the C compiler supports int64_t.
+ *     Usually the <inttypes.h> needs to be included, but sometimes
+ *	<sys/types.h> is enough.
+ */
+#$d_int64_t     HAS_INT64_T               /**/
+
+/* HAS_ISASCII:
+ *	This manifest constant lets the C program know that isascii 
+ *	is available.
+ */
+#$d_isascii HAS_ISASCII		/**/
+
+/* HAS_LCHOWN:
+ *	This symbol, if defined, indicates that the lchown routine is
+ *	available to operate on a symbolic link (instead of following the
+ *	link).
+ */
+#$d_lchown HAS_LCHOWN		/**/
+
+/* HAS_LDBL_DIG:
+ *	This symbol, if defined, indicates that this system's <float.h>
+ *	or <limits.h> defines the symbol LDBL_DIG, which is the number
+ *	of significant digits in a long double precision number. Unlike
+ *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#$d_ldbl_dig HAS_LDBL_DIG 	/* */
+
 /* HAS_LONG_DOUBLE:
  *	This symbol will be defined if the C compiler supports long
  *	doubles.
@@ -1797,12 +1682,113 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_memchr HAS_MEMCHR	/**/
 
+/* HAS_MKDTEMP:
+ *	This symbol, if defined, indicates that the mkdtemp routine is
+ *	available to exclusively create a uniquely named temporary directory.
+ */
+#$d_mkdtemp HAS_MKDTEMP		/**/
+
+/* HAS_MKSTEMP:
+ *	This symbol, if defined, indicates that the mkstemp routine is
+ *	available to exclusively create and open a uniquely named
+ *	temporary file.
+ */
+#$d_mkstemp HAS_MKSTEMP		/**/
+
+/* HAS_MKSTEMPS:
+ *	This symbol, if defined, indicates that the mkstemps routine is
+ *	available to excluslvely create and open a uniquely named
+ *	(with a suffix) temporary file.
+ */
+#$d_mkstemps HAS_MKSTEMPS		/**/
+
+/* HAS_MMAP:
+ *	This symbol, if defined, indicates that the mmap system call is
+ *	available to map a file into memory.
+ */
+/* Mmap_t:
+ *	This symbol holds the return type of the mmap() system call
+ *	(and simultaneously the type of the first argument).
+ *	Usually set to 'void *' or 'cadd_t'.
+ */
+#$d_mmap HAS_MMAP		/**/
+#define Mmap_t $mmaptype	/**/
+
+/* HAS_MPROTECT:
+ *	This symbol, if defined, indicates that the mprotect system call is
+ *	available to modify the access protection of a memory mapped file.
+ */
+#$d_mprotect HAS_MPROTECT		/**/
+
 /* HAS_MSG:
  *	This symbol, if defined, indicates that the entire msg*(2) library is
  *	supported (IPC mechanism based on message queues).
  */
 #$d_msg HAS_MSG		/**/
 
+/* HAS_OFF64_T:
+ *	This symbol will be defined if the C compiler supports off64_t.
+ */
+#$d_off64_t	HAS_OFF64_T    		/**/
+
+/* HAS_OPEN3:
+ *	This manifest constant lets the C program know that the three
+ *	argument form of open(2) is available.
+ */
+#$d_open3 HAS_OPEN3		/**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ *	This symbol, if defined, indicates how to create pthread
+ *	in joinable (aka undetached) state.  NOTE: not defined
+ *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ *	(the new version of the constant).
+ *	If defined, known values are PTHREAD_CREATE_UNDETACHED
+ *	and __UNDETACHED.
+ */
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+
+/* HAS_PTHREAD_YIELD:
+ *	This symbol, if defined, indicates that the pthread_yield 
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ *	This symbol defines the way to yield the execution of
+ *	the current thread.  Known ways are sched_yield,
+ *	pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ *	This symbol, if defined, indicates that the sched_yield
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+#$d_pthread_yield HAS_PTHREAD_YIELD	/**/
+#define SCHED_YIELD	$sched_yield	/**/
+#$d_sched_yield HAS_SCHED_YIELD	/**/
+
+/* HAS_SAFE_BCOPY:
+ *	This symbol, if defined, indicates that the bcopy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+#$d_safebcpy HAS_SAFE_BCOPY	/**/
+
+/* HAS_SAFE_MEMCPY:
+ *	This symbol, if defined, indicates that the memcpy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+#$d_safemcpy HAS_SAFE_MEMCPY	/**/
+
+/* HAS_SANE_MEMCMP:
+ *	This symbol, if defined, indicates that the memcmp routine is available
+ *	and can be used to compare relative magnitudes of chars with their high
+ *	bits set.  If it is not defined, roll your own version.
+ */
+#$d_sanemcmp HAS_SANE_MEMCMP	/**/
+
 /* HAS_SEM:
  *	This symbol, if defined, indicates that the entire sem*(2) library is
  *	supported.
@@ -1852,6 +1838,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_setsent HAS_SETSERVENT		/**/
 
+/* HAS_SETSPENT:
+ *	This symbol, if defined, indicates that the setspent system call is
+ *	available to initialize the scan of SysV shadow password entries.
+ */
+#$d_setspent HAS_SETSPENT		/**/
+
 /* HAS_SETVBUF:
  *	This symbol, if defined, indicates that the setvbuf routine is
  *	available to change buffering on an open stdio stream.
@@ -1859,12 +1851,55 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_setvbuf HAS_SETVBUF		/**/
 
+/* USE_SFIO:
+ *	This symbol, if defined, indicates that sfio should
+ *	be used.
+ */
+#$d_sfio	USE_SFIO		/**/
+
 /* HAS_SHM:
  *	This symbol, if defined, indicates that the entire shm*(2) library is
  *	supported.
  */
 #$d_shm HAS_SHM		/**/
 
+/* HAS_SIGACTION:
+ *	This symbol, if defined, indicates that Vr4's sigaction() routine
+ *	is available.
+ */
+#$d_sigaction HAS_SIGACTION	/**/
+
+/* HAS_SIGSETJMP:
+ *	This variable indicates to the C program that the sigsetjmp()
+ *	routine is available to save the calling process's registers
+ *	and stack environment for later use by siglongjmp(), and
+ *	to optionally save the process's signal mask.  See
+ *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ *	This macro is used in the same way as sigsetjmp(), but will invoke
+ *	traditional setjmp() if sigsetjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ *	This macro is used in the same way as siglongjmp(), but will invoke
+ *	traditional longjmp() if siglongjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+#$d_sigsetjmp HAS_SIGSETJMP	/**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
 /* HAS_SOCKET:
  *	This symbol, if defined, indicates that the BSD socket interface is
  *	supported.
@@ -1912,6 +1947,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_msg_proxy	HAS_MSG_PROXY	/**/
 #$d_scm_rights	HAS_SCM_RIGHTS	/**/
 
+/* HAS_SQRTL:
+ *	This symbol, if defined, indicates that the sqrtl routine is
+ *	available to do long double square roots.
+ */
+#$d_sqrtl HAS_SQRTL		/**/
+
 /* USE_STAT_BLOCKS:
  *	This symbol is defined if this system has a stat structure declaring
  *	st_blksize and st_blocks.
@@ -1920,6 +1961,88 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_statblks USE_STAT_BLOCKS 	/**/
 #endif
 
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	does have the f_flags member containing the mount flags of
+ *	the filesystem containing the file.
+ *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
+ *	have statfs() and struct statfs, they have ustat() and getmnt()
+ *	with struct ustat and struct fs_data.
+ */
+#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS		/**/
+
+/* HAS_STRUCT_STATFS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	to do statfs() is supported.
+ */
+#$d_statfs_s HAS_STRUCT_STATFS	/**/
+
+/* HAS_FSTATVFS:
+ *	This symbol, if defined, indicates that the fstatvfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS		/**/
+
+/* USE_STDIO_PTR:
+ *	This symbol is defined if the _ptr and _cnt fields (or similar)
+ *	of the stdio FILE structure can be used to access the stdio buffer
+ *	for a file handle.  If this is defined, then the FILE_ptr(fp)
+ *	and FILE_cnt(fp) macros will also be defined and should be used
+ *	to access these fields.
+ */
+/* FILE_ptr:
+ *	This macro is used to access the _ptr field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ *	This symbol is defined if the FILE_ptr macro can be used as an
+ *	lvalue.
+ */
+/* FILE_cnt:
+ *	This macro is used to access the _cnt field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ *	This symbol is defined if the FILE_cnt macro can be used as an
+ *	lvalue.
+ */
+#$d_stdstdio USE_STDIO_PTR 	/**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp)	$stdio_ptr
+#$d_stdio_ptr_lval STDIO_PTR_LVALUE 		/**/
+#define FILE_cnt(fp)	$stdio_cnt
+#$d_stdio_cnt_lval STDIO_CNT_LVALUE 		/**/
+#endif
+
+/* USE_STDIO_BASE:
+ *	This symbol is defined if the _base field (or similar) of the
+ *	stdio FILE structure can be used to access the stdio buffer for
+ *	a file handle.  If this is defined, then the FILE_base(fp) macro
+ *	will also be defined and should be used to access this field.
+ *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
+ *	will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ *	This macro is used to access the _base field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ *	This macro is used to determine the number of bytes in the I/O
+ *	buffer pointed to by _base field (or equivalent) of the FILE
+ *	structure pointed to its argument. This macro will always be defined
+ *	if USE_STDIO_BASE is defined.
+ */
+#$d_stdiobase USE_STDIO_BASE 	/**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp)	$stdio_base
+#define FILE_bufsiz(fp)	$stdio_bufsiz
+#endif
+
 /* HAS_STRERROR:
  *	This symbol, if defined, indicates that the strerror routine is
  *	available to translate error numbers to strings. See the writeup
@@ -1939,6 +2062,52 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_syserrlst HAS_SYS_ERRLIST	/**/
 #define Strerror(e) $d_strerrm
 
+/* HAS_STRTOLD:
+ *	This symbol, if defined, indicates that the strtold routine is
+ *	available to convert strings to long doubles.
+ */
+#$d_strtold HAS_STRTOLD		/**/
+
+/* HAS_STRTOLL:
+ *	This symbol, if defined, indicates that the strtoll routine is
+ *	available to convert strings to long longs.
+ */
+#$d_strtoll HAS_STRTOLL		/**/
+
+/* HAS_STRTOULL:
+ *	This symbol, if defined, indicates that the strtoull routine is
+ *	available to convert strings to unsigned long longs.
+ */
+#$d_strtoull HAS_STRTOULL		/**/
+
+/* HAS_STRTOUQ:
+ *	This symbol, if defined, indicates that the strtouq routine is
+ *	available to convert strings to unsigned long longs (quads).
+ */
+#$d_strtouq HAS_STRTOUQ		/**/
+
+/* HAS_TELLDIR_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the telldir() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern long telldir _((DIR*));
+ */
+#$d_telldirproto	HAS_TELLDIR_PROTO	/**/
+
+/* Time_t:
+ *	This symbol holds the type returned by time(). It can be long,
+ *	or time_t on BSD sites (in which case <sys/types.h> should be
+ *	included).
+ */
+#define Time_t $timetype		/* Time type */
+
+/* HAS_TIMES:
+ *	This symbol, if defined, indicates that the times() routine exists.
+ *	Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#$d_times HAS_TIMES		/**/
+
 /* HAS_UNION_SEMUN:
  *	This symbol, if defined, indicates that the union semun is
  *	defined by including <sys/sem.h>.  If not, the user code
@@ -1961,6 +2130,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_semctl_semun USE_SEMCTL_SEMUN	/**/
 #$d_semctl_semid_ds USE_SEMCTL_SEMID_DS	/**/
 
+/* HAS_USTAT:
+ *	This symbol, if defined, indicates that the ustat system call is
+ *	available to query file system statistics by dev_t.
+ */
+#$d_ustat HAS_USTAT		/**/
+
 /* HAS_VFORK:
  *	This symbol, if defined, indicates that vfork() exists.
  */
@@ -1974,6 +2149,78 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define Signal_t $signal_t	/* Signal handler's return type */
 
+/* HAS_VPRINTF:
+ *	This symbol, if defined, indicates that the vprintf routine is available
+ *	to printf with a pointer to an argument list.  If unavailable, you
+ *	may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ *	This symbol is defined if this system has vsprintf() returning type
+ *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
+ *	is up to the package author to declare vsprintf correctly based on the
+ *	symbol.
+ */
+#$d_vprintf HAS_VPRINTF	/**/
+#$d_charvspr USE_CHAR_VSPRINTF 	/**/
+
+/* USE_DYNAMIC_LOADING:
+ *	This symbol, if defined, indicates that dynamic loading of
+ *	some sort is available.
+ */
+#$usedl USE_DYNAMIC_LOADING		/**/
+
+/* DOUBLESIZE:
+ *	This symbol contains the size of a double, so that the C preprocessor
+ *	can make decisions based on it.
+ */
+#define DOUBLESIZE $doublesize		/**/
+
+/* EBCDIC:
+ *     This symbol, if defined, indicates that this system uses
+ *	EBCDIC encoding.
+ */
+#$ebcdic	EBCDIC 		/**/
+
+/* FFLUSH_NULL:
+ *	This symbol, if defined, tells that fflush(NULL) does flush
+ *	all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ *	This symbol, if defined, tells that to flush
+ *	all pending stdio output one must loop through all
+ *	the stdio file handles stored in an array and fflush them.
+ *	Note that if fflushNULL is defined, fflushall will not
+ *	even be probed for and will be left undefined.
+ */
+#$fflushNULL	FFLUSH_NULL 		/**/
+#$fflushall	FFLUSH_ALL 		/**/
+
+/* Fpos_t:
+ *	This symbol holds the type used to declare file positions in libc.
+ *	It can be fpos_t, long, uint, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t $fpostype		/* File position type */
+
+/* Gid_t_f:
+ *	This symbol defines the format string used for printing a Gid_t.
+ */
+#define	Gid_t_f		$gidformat		/**/
+
+/* Gid_t_size:
+ *	This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size $gidsize		/* GID size */
+
+/* Gid_t:
+ *	This symbol holds the return type of getgid() and the type of
+ *	argument to setrgid() and related functions.  Typically,
+ *	it is the type of group ids in the kernel. It can be int, ushort,
+ *	uid_t, etc... It may be necessary to include <sys/types.h> to get
+ *	any typedef'ed information.
+ */
+#define Gid_t $gidtype		/* Type for getgid(), etc... */
+
 /* Groups_t:
  *	This symbol holds the type used for the second argument to
  *	getgroups() and setgropus().  Usually, this is the same as
@@ -1987,6 +2234,19 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define Groups_t $groupstype	/* Type for 2nd arg to [sg]etgroups() */
 #endif
 
+/* DB_Prefix_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t	$db_hashtype		/**/
+#define DB_Prefix_t	$db_prefixtype  	/**/
+
 /* I_GRP:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <grp.h>.
@@ -1998,12 +2258,54 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$i_grp I_GRP		/**/
 #$d_grpasswd GRPASSWD	/**/
 
+/* I_ICONV:
+ *	This symbol, if defined, indicates that <iconv.h> exists and
+ *	should be included.
+ */
+#$i_iconv	I_ICONV		/**/
+
+/* I_INTTYPES:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <inttypes.h>.
+ */
+#$i_inttypes   I_INTTYPES                /**/
+
+/* I_MACH_CTHREADS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <mach/cthreads.h>.
+ */
+#$i_machcthr   I_MACH_CTHREADS	/**/
+
+/* I_MNTENT:
+ *	This symbol, if defined, indicates that <mntent.h> exists and
+ *	should be included.
+ */
+#$i_mntent	I_MNTENT		/**/
+
 /* I_NETDB:
  *	This symbol, if defined, indicates that <netdb.h> exists and
  *	should be included.
  */
 #$i_netdb I_NETDB		/**/
 
+/* I_NETINET_TCP:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <netinet/tcp.h>.
+ */
+#$i_netinettcp   I_NETINET_TCP                /**/
+
+/* I_POLL:
+ *	This symbol, if defined, indicates that <poll.h> exists and
+ *	should be included.
+ */
+#$i_poll	I_POLL		/**/
+
+/* I_PTHREAD:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <pthread.h>.
+ */
+#$i_pthread   I_PTHREAD	/**/
+
 /* I_PWD:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <pwd.h>.
@@ -2050,297 +2352,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_pwgecos PWGECOS	/**/
 #$d_pwpasswd PWPASSWD	/**/
 
-/* I_SYSUIO:
- *	This symbol, if defined, indicates that <sys/uio.h> exists and
- *	should be included.
- */
-#$i_sysuio	I_SYSUIO		/**/
-
-/* Free_t:
- *	This variable contains the return type of free().  It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- *	This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t $malloctype			/**/
-#define Free_t $freetype			/**/
-
-/* MYMALLOC:
- *	This symbol, if defined, indicates that we're using our own malloc.
- */
-#$d_mymalloc MYMALLOC			/**/
-
-/* SIG_NAME:
- *	This symbol contains a list of signal names in order of
- *	signal number. This is intended
- *	to be used as a static array initialization, like this:
- *		char *sig_name[] = { SIG_NAME };
- *	The signals in the list are separated with commas, and each signal
- *	is surrounded by double quotes. There is no leading SIG in the signal
- *	name, i.e. SIGQUIT is known as "QUIT".
- *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- *	etc., where nn is the actual signal number (e.g. NUM37).
- *	The signal number for sig_name[i] is stored in sig_num[i].
- *	The last element is 0 to terminate the list with a NULL.  This
- *	corresponds to the 0 at the end of the sig_num list.
- */
-/* SIG_NUM:
- *	This symbol contains a list of signal numbers, in the same order as the
- *	SIG_NAME list. It is suitable for static array initialization, as in:
- *		int sig_num[] = { SIG_NUM };
- *	The signals in the list are separated with commas, and the indices
- *	within that list and the SIG_NAME list match, so it's easy to compute
- *	the signal name from a number or vice versa at the price of a small
- *	dynamic linear lookup. 
- *	Duplicates are allowed, but are moved to the end of the list.
- *	The signal number corresponding to sig_name[i] is sig_number[i].
- *	if (i < NSIG) then sig_number[i] == i.  
- *	The last element is 0, corresponding to the 0 at the end of
- *	the sig_name list.
- */
-#define SIG_NAME $sig_name_init		/**/
-#define SIG_NUM  $sig_num_init		/**/
-
-/* VOIDFLAGS:
- *	This symbol indicates how much support of the void type is given by this
- *	compiler.  What various bits mean:
- *
- *	    1 = supports declaration of void
- *	    2 = supports arrays of pointers to functions returning void
- *	    4 = supports comparisons between pointers to void functions and
- *		    addresses of void functions
- *	    8 = suports declaration of generic void pointers
- *
- *	The package designer should define VOIDUSED to indicate the requirements
- *	of the package.  This can be done either by #defining VOIDUSED before
- *	including config.h, or by defining defvoidused in Myinit.U.  If the
- *	latter approach is taken, only those flags will be tested.  If the
- *	level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
-#endif
-#define VOIDFLAGS $voidflags
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int		/* is void to be avoided? */
-#define M_VOID			/* Xenix strikes again */
-#endif
-
-/* HAS_ATOLF:
- *	This symbol, if defined, indicates that the atolf routine is
- *	available to convert strings into long doubles.
- */
-#$d_atolf HAS_ATOLF		/**/
-
-/* HAS_ATOLL:
- *	This symbol, if defined, indicates that the atoll routine is
- *	available to convert strings into long longs.
- */
-#$d_atoll HAS_ATOLL		/**/
-
-/* PERL_BINCOMPAT_5005:
- *	This symbol, if defined, indicates that Perl 5.006 should be
- *	binary-compatible with Perl 5.005.  This is impossible for builds
- *	that use features like threads and multiplicity it is always $undef
- *	for those versions.
- */
-#$d_bincompat5005 PERL_BINCOMPAT_5005			/**/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- *	This symbol, if defined, indicates that we need to prepend an
- *	underscore to the symbol name before calling dlsym().  This only
- *	makes sense if you *have* dlsym, which we will presume is the
- *	case if you're using dl_dlopen.xs.
- */
-#$d_dlsymun 	DLSYM_NEEDS_UNDERSCORE 	/**/
-
-/* HAS_ENDSPENT:
- *	This symbol, if defined, indicates that the endspent system call is
- *	available to finalize the scan of SysV shadow password entries.
- */
-#$d_endspent HAS_ENDSPENT		/**/
-
-/* HAS_STRUCT_FS_DATA:
- *	This symbol, if defined, indicates that the struct fs_data
- *	to do statfs() is supported.
- */
-#$d_fs_data_s HAS_STRUCT_FS_DATA	/**/
-
-/* HAS_FSEEKO:
- *	This symbol, if defined, indicates that the fseeko routine is
- *	available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_fseeko HAS_FSEEKO		/**/
-
-/* HAS_FSTATFS:
- *	This symbol, if defined, indicates that the fstatfs routine is
- *	available to stat filesystems by file descriptors.
- */
-#$d_fstatfs HAS_FSTATFS		/**/
-/* HAS_FTELLO:
- *	This symbol, if defined, indicates that the ftello routine is
- *	available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_ftello HAS_FTELLO		/**/
-
-/* HAS_GETMNT:
- *	This symbol, if defined, indicates that the getmnt routine is
- *	available to get filesystem mount info by filename.
- */
-#$d_getmnt HAS_GETMNT		/**/
-
-/* HAS_GETMNTENT:
- *	This symbol, if defined, indicates that the getmntent routine is
- *	available to iterate through mounted file systems to get their info.
- */
-#$d_getmntent HAS_GETMNTENT		/**/
-
-/* HAS_GETSPENT:
- *	This symbol, if defined, indicates that the getspent system call is
- *	available to retrieve SysV shadow password entries sequentially.
- */
-#$d_getspent HAS_GETSPENT		/**/
-
-/* HAS_GETSPNAM:
- *	This symbol, if defined, indicates that the getspnam system call is
- *	available to retrieve SysV shadow password entries by name.
- */
-#$d_getspnam HAS_GETSPNAM		/**/
-
-/* HAS_HASMNTOPT:
- *	This symbol, if defined, indicates that the hasmntopt routine is
- *	available to query the mount options of file systems.
- */
-#$d_hasmntopt HAS_HASMNTOPT		/**/
-
-/* HAS_INT64_T:
- *     This symbol will defined if the C compiler supports int64_t.
- *     Usually the <inttypes.h> needs to be included, but sometimes
- *	<sys/types.h> is enough.
- */
-#$d_int64t     HAS_INT64_T               /**/
-
-/* HAS_LDBL_DIG:
- *	This symbol, if defined, indicates that this system's <float.h>
- *	or <limits.h> defines the symbol LDBL_DIG, which is the number
- *	of significant digits in a long double precision number. Unlike
- *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#$d_ldbl_dig HAS_LDBL_DIG 	/* */
-
-/* HAS_SETSPENT:
- *	This symbol, if defined, indicates that the setspent system call is
- *	available to initialize the scan of SysV shadow password entries.
- */
-#$d_setspent HAS_SETSPENT		/**/
-
-/* USE_SFIO:
- *	This symbol, if defined, indicates that sfio should
- *	be used.
- */
-#$d_sfio	USE_SFIO		/**/
-
-/* HAS_SQRTL:
- *	This symbol, if defined, indicates that the sqrtl routine is
- *	available to do long double square roots.
- */
-#$d_sqrtl HAS_SQRTL		/**/
-
-/* HAS_STRUCT_STATFS_F_FLAGS:
- *	This symbol, if defined, indicates that the struct statfs
- *	does have the f_flags member containing the mount flags of
- *	the filesystem containing the file.
- *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
- *	have statfs() and struct statfs, they have ustat() and getmnt()
- *	with struct ustat and struct fs_data.
- */
-#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS		/**/
-
-/* HAS_STRUCT_STATFS:
- *	This symbol, if defined, indicates that the struct statfs
- *	to do statfs() is supported.
- */
-#$d_statfs_s HAS_STRUCT_STATFS	/**/
-
-/* HAS_FSTATVFS:
- *	This symbol, if defined, indicates that the fstatvfs routine is
- *	available to stat filesystems by file descriptors.
- */
-#$d_fstatvfs HAS_FSTATVFS		/**/
-
-/* HAS_TELLDIR_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the telldir() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern long telldir _((DIR*));
- */
-#$d_telldirproto	HAS_TELLDIR_PROTO	/**/
-
-/* HAS_USTAT:
- *	This symbol, if defined, indicates that the ustat system call is
- *	available to query file system statistics by dev_t.
- */
-#$d_ustat HAS_USTAT		/**/
-
-/* USE_DYNAMIC_LOADING:
- *	This symbol, if defined, indicates that dynamic loading of
- *	some sort is available.
- */
-#$usedl USE_DYNAMIC_LOADING		/**/
-
-/* FFLUSH_NULL:
- *	This symbol, if defined, tells that fflush(NULL) does flush
- *	all pending stdio output.
- */
-/* FFLUSH_ALL:
- *	This symbol, if defined, tells that to flush
- *	all pending stdio output one must loop through all
- *	the stdio file handles stored in an array and fflush them.
- *	Note that if fflushNULL is defined, fflushall will not
- *	even be probed for and will be left undefined.
- */
-#$fflushNULL	FFLUSH_NULL 		/**/
-#$fflushall	FFLUSH_ALL 		/**/
-
-/* DB_Prefix_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is size_t.
- */
-#define DB_Hash_t	$db_hashtype		/**/
-#define DB_Prefix_t	$db_prefixtype  	/**/
-
-/* I_INTTYPES:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <inttypes.h>.
- */
-#$i_inttypes   I_INTTYPES                /**/
-
-/* I_MNTENT:
- *	This symbol, if defined, indicates that <mntent.h> exists and
- *	should be included.
- */
-#$i_mntent	I_MNTENT		/**/
-
-/* I_NETINET_TCP:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <netinet/tcp.h>.
- */
-#$i_netinettcp   I_NETINET_TCP                /**/
-
-/* I_POLL:
- *	This symbol, if defined, indicates that <poll.h> exists and
- *	should be included.
- */
-#$i_poll	I_POLL		/**/
-
 /* I_SHADOW:
  *	This symbol, if defined, indicates that <shadow.h> exists and
  *	should be included.
@@ -2353,6 +2364,18 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$i_socks	I_SOCKS		/**/
 
+/* I_SYSLOG:
+ *	This symbol, if defined, indicates that <syslog.h> exists and
+ *	should be included.
+ */
+#$i_syslog	I_SYSLOG		/**/
+
+/* I_SYSMODE:
+ *	This symbol, if defined, indicates that <sys/mode.h> exists and
+ *	should be included.
+ */
+#$i_sysmode	I_SYSMODE		/**/
+
 /* I_SYS_MOUNT:
  *	This symbol, if defined, indicates that <sys/mount.h> exists and
  *	should be included.
@@ -2370,26 +2393,60 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$i_sysstatvfs	I_SYS_STATVFS		/**/
 
+/* I_SYSUIO:
+ *	This symbol, if defined, indicates that <sys/uio.h> exists and
+ *	should be included.
+ */
+#$i_sysuio	I_SYSUIO		/**/
+
+/* I_SYSUTSNAME:
+ *	This symbol, if defined, indicates that <sys/utsname.h> exists and
+ *	should be included.
+ */
+#$i_sysutsname	I_SYSUTSNAME		/**/
+
 /* I_SYS_VFS:
  *	This symbol, if defined, indicates that <sys/vfs.h> exists and
  *	should be included.
  */
 #$i_sysvfs	I_SYS_VFS		/**/
 
+/* I_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <time.h>.
+ */
+/* I_SYS_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h> with KERNEL defined.
+ */
+#$i_time I_TIME		/**/
+#$i_systime I_SYS_TIME		/**/
+#$i_systimek I_SYS_TIME_KERNEL		/**/
+
 /* I_USTAT:
  *	This symbol, if defined, indicates that <ustat.h> exists and
  *	should be included.
  */
 #$i_ustat	I_USTAT		/**/
 
-/* HAS_OFF64_T:
- *	This symbol will be defined if the C compiler supports off64_t.
+/* PERL_INC_VERSION_LIST:
+ *	This variable specifies the list of subdirectories in over
+ *	which perl.c:incpush() and lib/lib.pm will automatically
+ *	search when adding directories to @INC, in a format suitable
+ *	for a C initialization string.  See the inc_version_list entry
+ *	in Porting/Glossary for more details.
  */
-/* HAS_FPOS64_T:
- *	This symbol will be defined if the C compiler supports fpos64_t.
+#define PERL_INC_VERSION_LIST $inc_version_list_init		/**/
+
+/* INSTALL_USR_BIN_PERL:
+ *	This symbol, if defined, indicates that Perl is to be installed
+ * 	also as /usr/bin/perl.
  */
-#$d_off64_t	HAS_OFF64_T    		/**/
-#$d_fpos64_t	HAS_FPOS64_T    	/**/
+#$installusrbinperl INSTALL_USR_BIN_PERL	/**/
 
 /* PERL_PRIfldbl:
  *	This symbol, if defined, contains the string used by stdio to
@@ -2402,6 +2459,92 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_PRIfldbl PERL_PRIfldbl	$sPRIfldbl	/**/
 #$d_PRIgldbl PERL_PRIgldbl	$sPRIgldbl	/**/
 
+/* Off_t:
+ *	This symbol holds the type used to declare offsets in the kernel.
+ *	It can be int, long, off_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t $lseektype		/* <offset> type */
+#define LSEEKSIZE $lseeksize		/* <offset> size */
+#define Off_t_size $lseeksize	/* <offset> size */
+
+/* Free_t:
+ *	This variable contains the return type of free().  It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ *	This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t $malloctype			/**/
+#define Free_t $freetype			/**/
+
+/* MYMALLOC:
+ *	This symbol, if defined, indicates that we're using our own malloc.
+ */
+#$d_mymalloc MYMALLOC			/**/
+
+/* Mode_t:
+ *	This symbol holds the type used to declare file modes 
+ *	for systems calls.  It is usually mode_t, but may be
+ *	int or unsigned short.  It may be necessary to include <sys/types.h>
+ *	to get any typedef'ed information.
+ */
+#define Mode_t $modetype	 /* file mode parameter for system calls */
+
+/* VAL_O_NONBLOCK:
+ *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ *	non-blocking I/O for the file descriptor. Note that there is no way
+ *	back, i.e. you cannot turn it blocking again this way. If you wish to
+ *	alternatively switch between blocking and non-blocking, use the
+ *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ *	This symbol holds the errno error code set by read() when no data was
+ *	present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ *	This symbol holds the return code from read() when no data is present
+ *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ *	not defined, then you can't distinguish between no data and EOF by
+ *	issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ *	This symbol, if defined, indicates to the C program that a read() on
+ *	a non-blocking file descriptor will return 0 on EOF, and not the value
+ *	held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK $o_nonblock
+#define VAL_EAGAIN $eagain
+#define RD_NODATA $rd_nodata
+#$d_eofnblk EOF_NONBLOCK
+
+/* Netdb_host_t:
+ *	This symbol holds the type used for the 1st argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ *	This symbol holds the type used for the 2nd argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ *	This symbol holds the type used for the argument to
+ *	gethostbyname().
+ */
+/* Netdb_net_t:
+ *	This symbol holds the type used for the 1st argument to
+ *	getnetbyaddr().
+ */
+#define Netdb_host_t		$netdb_host_type /**/
+#define Netdb_hlen_t		$netdb_hlen_type /**/
+#define Netdb_name_t		$netdb_name_type /**/
+#define Netdb_net_t		$netdb_net_type /**/
+
 /* IVTYPE:
  *	This symbol defines the C type used for Perl's IV.
  */
@@ -2465,6 +2608,10 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 /* U64SIZE:
  *	This symbol contains the sizeof(U64).
  */
+/* NV_PRESERVES_UV:
+ *	This symbol, if defined, indicates that a variable of type NVTYPE
+ *	can preserve all the bit of a variable of type UVSIZE.
+ */
 #define	IVTYPE		$ivtype		/**/
 #define	UVTYPE		$uvtype		/**/
 #define	I8TYPE		$i8type		/**/
@@ -2490,6 +2637,7 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define	I64SIZE		$i64size	/**/
 #define	U64SIZE		$u64size	/**/
 #endif
+#$d_nv_preserves_uv	NV_PRESERVES_UV
 
 /* IVdf:
  *	This symbol defines the format string used for printing a Perl IV
@@ -2512,6 +2660,59 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define	UVof		$uvoformat		/**/
 #define	UVxf		$uvxformat		/**/
 
+/* Pid_t:
+ *	This symbol holds the type used to declare process ids in the kernel.
+ *	It can be int, uint, pid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t $pidtype		/* PID type */
+
+/* PRIVLIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ *	This symbol contains the ~name expanded version of PRIVLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "$privlib"		/**/
+#define PRIVLIB_EXP "$privlibexp"		/**/
+
+/* PTRSIZE:
+ *	This symbol contains the size of a pointer, so that the C preprocessor
+ *	can make decisions based on it.  It will be sizeof(void *) if
+ *	the compiler supports (void *); otherwise it will be
+ *	sizeof(char *).
+ */
+#define PTRSIZE $ptrsize		/**/
+
+/* Drand01:
+ *	This macro is to be used to generate uniformly distributed
+ *	random numbers over the range [0., 1.[.  You may have to supply
+ *	an 'extern double drand48();' in your program since SunOS 4.1.3
+ *	doesn't provide you with anything relevant in it's headers.
+ *	See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ *	This symbol defines the type of the argument of the
+ *	random seed function.
+ */
+/* seedDrand01:
+ *	This symbol defines the macro to be used in seeding the
+ *	random number generator (see Drand01).
+ */
+/* RANDBITS:
+ *	This symbol indicates how many bits are produced by the
+ *	function used to generate normalized random numbers.
+ *	Values include 15, 16, 31, and 48.
+ */
+#define Drand01()		$drand01		/**/
+#define Rand_seed_t		$randseedtype		/**/
+#define seedDrand01(x)	$seedfunc((Rand_seed_t)x)	/**/
+#define RANDBITS		$randbits		/**/
+
 /* SELECT_MIN_BITS:
  *	This symbol holds the minimum number of bits operated by select.
  *	That is, if you do select(n, ...), how many bits at least will be
@@ -2521,6 +2722,99 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define SELECT_MIN_BITS 	$selectminbits	/**/
 
+/* Select_fd_set_t:
+ *	This symbol holds the type used for the 2nd, 3rd, and 4th
+ *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
+ *	is defined, and 'int *' otherwise.  This is only useful if you 
+ *	have select(), of course.
+ */
+#define Select_fd_set_t 	$selecttype	/**/
+
+/* SIG_NAME:
+ *	This symbol contains a list of signal names in order of
+ *	signal number. This is intended
+ *	to be used as a static array initialization, like this:
+ *		char *sig_name[] = { SIG_NAME };
+ *	The signals in the list are separated with commas, and each signal
+ *	is surrounded by double quotes. There is no leading SIG in the signal
+ *	name, i.e. SIGQUIT is known as "QUIT".
+ *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ *	etc., where nn is the actual signal number (e.g. NUM37).
+ *	The signal number for sig_name[i] is stored in sig_num[i].
+ *	The last element is 0 to terminate the list with a NULL.  This
+ *	corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ *	This symbol contains a list of signal numbers, in the same order as the
+ *	SIG_NAME list. It is suitable for static array initialization, as in:
+ *		int sig_num[] = { SIG_NUM };
+ *	The signals in the list are separated with commas, and the indices
+ *	within that list and the SIG_NAME list match, so it's easy to compute
+ *	the signal name from a number or vice versa at the price of a small
+ *	dynamic linear lookup. 
+ *	Duplicates are allowed, but are moved to the end of the list.
+ *	The signal number corresponding to sig_name[i] is sig_number[i].
+ *	if (i < NSIG) then sig_number[i] == i.  
+ *	The last element is 0, corresponding to the 0 at the end of
+ *	the sig_name list.
+ */
+#define SIG_NAME $sig_name_init		/**/
+#define SIG_NUM  $sig_num_init		/**/
+
+/* SITEARCH:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-dependent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ *	This symbol contains the ~name expanded version of SITEARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "$sitearch"		/**/
+#define SITEARCH_EXP "$sitearchexp"		/**/
+
+/* SITELIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-independent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ *	This symbol contains the ~name expanded version of SITELIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB "$sitelib"		/**/
+#define SITELIB_EXP "$sitelibexp"		/**/
+
+/* Size_t:
+ *	This symbol holds the type used to declare length parameters
+ *	for string functions.  It is usually size_t, but may be
+ *	unsigned long, int, etc.  It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t $sizetype	 /* length paramater for string functions */
+
+/* SSize_t:
+ *	This symbol holds the type used by functions that return
+ *	a count of bytes or an error condition.  It must be a signed type.
+ *	It is usually ssize_t, but may be long or int, etc.
+ *	It may be necessary to include <sys/types.h> or <unistd.h>
+ *	to get any typedef'ed information.
+ *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t $ssizetype	 /* signed count of bytes */
+
 /* STARTPERL:
  *	This variable contains the string to put in front of a perl
  *	script to make sure (one hopes) that it runs with perl and not
@@ -2539,25 +2833,52 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_stdio_stream_array	HAS_STDIO_STREAM_ARRAY	/**/
 #define STDIO_STREAM_ARRAY	$stdio_stream_array
 
-/* HAS_STRTOULL:
- *	This symbol, if defined, indicates that the strtoull routine is
- *	available to convert strings into unsigned long longs.
+/* Uid_t_f:
+ *	This symbol defines the format string used for printing a Uid_t.
  */
-#$d_strtoull HAS_STRTOULL		/**/
+#define	Uid_t_f		$uidformat		/**/
+
+/* Uid_t_size:
+ *	This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size $uidsize		/* UID size */
 
-/* USE_64_BITS:
+/* Uid_t:
+ *	This symbol holds the type used to declare user ids in the kernel.
+ *	It can be int, ushort, uid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t $uidtype		/* UID type */
+
+/* USE_64_BIT_INT:
  *	This symbol, if defined, indicates that 64-bit integers should
  *	be used when available.  If not defined, the native integers
- *	will be used (be they 32 or 64 bits).
+ *	will be employed (be they 32 or 64 bits).  The minimal possible
+ *	64-bitness is used, just enough to get 64-bit integers into Perl.
+ *	This may mean using for example "long longs", while your memory
+ *	may still be limited to 2 gigabytes.
  */
-#ifndef USE_64_BITS
-#$use64bits	USE_64_BITS		/**/
+/* USE_64_BIT_ALL:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be used (be they 32 or 64 bits).  The maximal possible
+ *	64-bitness is employed: LP64 or ILP64, meaning that you will
+ *	be able to use more than 2 gigabytes of memory.  This mode is
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
+ *	be able to run the resulting executable in a 32-bit CPU at all or
+ *	you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+#$use64bitint	USE_64_BIT_INT		/**/
+#endif
+
+#ifndef USE_64_BIT_ALL
+#$use64bitall	USE_64_BIT_ALL		/**/
 #endif
 
 /* USE_LARGE_FILES:
  *	This symbol, if defined, indicates that large file support
- *	should be used when available.  The USE_64_BITS symbol will
- *	also be turned on if necessary.
+ *	should be used when available.
  */
 #ifndef USE_LARGE_FILES
 #$uselargefiles	USE_LARGE_FILES		/**/
@@ -2571,6 +2892,10 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$uselongdouble	USE_LONG_DOUBLE		/**/
 #endif
 
+/* USE_MORE_BITS:
+ *	This symbol, if defined, indicates that 64-bit interfaces and
+ *	long doubles should be used when available.
+ */
 #ifndef USE_MORE_BITS
 #$usemorebits	USE_MORE_BITS		/**/
 #endif
@@ -2600,6 +2925,56 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$usesocks	USE_SOCKS		/**/
 #endif
 
+/* USE_ITHREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the 5.005-based threading implementation.
+ */
+/* OLD_PTHREADS_API:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built to use the old draft POSIX threads API.
+ */
+#$use5005threads	USE_5005THREADS		/**/
+#$useithreads	USE_ITHREADS		/**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define		USE_THREADS		/* until src is revised*/
+#endif
+#$d_oldpthreads	OLD_PTHREADS_API		/**/
+
+/* PERL_VENDORLIB_EXP:
+ *	This symbol contains the ~name expanded version of VENDORLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp"		/**/
+
+/* VOIDFLAGS:
+ *	This symbol indicates how much support of the void type is given by this
+ *	compiler.  What various bits mean:
+ *
+ *	    1 = supports declaration of void
+ *	    2 = supports arrays of pointers to functions returning void
+ *	    4 = supports comparisons between pointers to void functions and
+ *		    addresses of void functions
+ *	    8 = suports declaration of generic void pointers
+ *
+ *	The package designer should define VOIDUSED to indicate the requirements
+ *	of the package.  This can be done either by #defining VOIDUSED before
+ *	including config.h, or by defining defvoidused in Myinit.U.  If the
+ *	latter approach is taken, only those flags will be tested.  If the
+ *	level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED $defvoidused
+#endif
+#define VOIDFLAGS $voidflags
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int		/* is void to be avoided? */
+#define M_VOID			/* Xenix strikes again */
+#endif
+
 /* PERL_XS_APIVERSION:
  *	This variable contains the version of the oldest perl binary
  *	compatible with the present perl.  perl.c:incpush() and
@@ -2632,234 +3007,28 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  *	(presumably) be similar.
  *	See the INSTALL file for how this works.
  */
-#define PERL_XS_APIVERSION $xs_apiversion /* Change to string for tuples?*/
-#define PERL_PM_APIVERSION $pm_apiversion /* Change to string for tuples?*/
-
-/* HAS_DRAND48_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the drand48() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern double drand48 _((void));
- */
-#$d_drand48proto	HAS_DRAND48_PROTO	/**/
-
-/* HAS_GETHOST_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for gethostent(), gethostbyname(), and
- *	gethostbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_gethostprotos	HAS_GETHOST_PROTOS	/**/
-
-/* HAS_GETNET_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getnetent(), getnetbyname(), and
- *	getnetbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getnetprotos	HAS_GETNET_PROTOS	/**/
-
-/* HAS_GETPROTO_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getprotoent(), getprotobyname(), and
- *	getprotobyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getprotoprotos	HAS_GETPROTO_PROTOS	/**/
-
-/* HAS_GETSERV_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getservent(), getservbyname(), and
- *	getservbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getservprotos	HAS_GETSERV_PROTOS	/**/
-
-/* Netdb_host_t:
- *	This symbol holds the type used for the 1st argument
- *	to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- *	This symbol holds the type used for the 2nd argument
- *	to gethostbyaddr().
- */
-/* Netdb_name_t:
- *	This symbol holds the type used for the argument to
- *	gethostbyname().
- */
-/* Netdb_net_t:
- *	This symbol holds the type used for the 1st argument to
- *	getnetbyaddr().
- */
-#define Netdb_host_t		$netdb_host_type /**/
-#define Netdb_hlen_t		$netdb_hlen_type /**/
-#define Netdb_name_t		$netdb_name_type /**/
-#define Netdb_net_t		$netdb_net_type /**/
-
-/* Select_fd_set_t:
- *	This symbol holds the type used for the 2nd, 3rd, and 4th
- *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
- *	is defined, and 'int *' otherwise.  This is only useful if you 
- *	have select(), of course.
- */
-#define Select_fd_set_t 	$selecttype	/**/
-
-/* ARCHNAME:
- *	This symbol holds a string representing the architecture name.
- *	It may be used to construct an architecture-dependant pathname
- *	where library files may be held under a private library, for
- *	instance.
- */
-#define ARCHNAME "$archname"		/**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- *	This symbol, if defined, indicates how to create pthread
- *	in joinable (aka undetached) state.  NOTE: not defined
- *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- *	(the new version of the constant).
- *	If defined, known values are PTHREAD_CREATE_UNDETACHED
- *	and __UNDETACHED.
- */
-#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
-
-/* HAS_PTHREAD_YIELD:
- *	This symbol, if defined, indicates that the pthread_yield 
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- *	This symbol defines the way to yield the execution of
- *	the current thread.  Known ways are sched_yield,
- *	pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- *	This symbol, if defined, indicates that the sched_yield
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-#$d_pthread_yield HAS_PTHREAD_YIELD	/**/
-#define SCHED_YIELD	$sched_yield	/**/
-#$d_sched_yield HAS_SCHED_YIELD	/**/
+#define PERL_XS_APIVERSION "$xs_apiversion"
+#define PERL_PM_APIVERSION "$pm_apiversion"
 
-/* I_MACH_CTHREADS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <mach/cthreads.h>.
+/* HAS_GETFSSTAT:
+ *	This symbol, if defined, indicates that the getfsstat routine is
+ *	available to stat filesystems in bulk.
  */
-#$i_machcthr   I_MACH_CTHREADS	/**/
+#$d_getfsstat HAS_GETFSSTAT		/**/
 
-/* I_PTHREAD:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <pthread.h>.
- */
-#$i_pthread   I_PTHREAD	/**/
-
-/* USE_THREADS:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use threads.
- */
-/* OLD_PTHREADS_API:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use the old draft POSIX threads API.
- */
-#ifndef USE_TTHREADS
-#$usethreads	USE_THREADS		/**/
-#endif
-#$d_oldpthreads	OLD_PTHREADS_API		/**/
-
-/* Time_t:
- *	This symbol holds the type returned by time(). It can be long,
- *	or time_t on BSD sites (in which case <sys/types.h> should be
- *	included).
- */
-#define Time_t $timetype		/* Time type */
-
-/* HAS_TIMES:
- *	This symbol, if defined, indicates that the times() routine exists.
- *	Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#$d_times HAS_TIMES		/**/
-
-/* Fpos_t:
- *	This symbol holds the type used to declare file positions in libc.
- *	It can be fpos_t, long, uint, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t $fpostype		/* File position type */
-
-/* Gid_t_f:
- *	This symbol defines the format string used for printing a Gid_t.
- */
-#define	Gid_t_f		$gidformat		/**/
-
-/* Gid_t_size:
- *	This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size $gidsize		/* GID size */
-
-/* Gid_t:
- *	This symbol holds the return type of getgid() and the type of
- *	argument to setrgid() and related functions.  Typically,
- *	it is the type of group ids in the kernel. It can be int, ushort,
- *	uid_t, etc... It may be necessary to include <sys/types.h> to get
- *	any typedef'ed information.
- */
-#define Gid_t $gidtype		/* Type for getgid(), etc... */
-
-/* Off_t:
- *	This symbol holds the type used to declare offsets in the kernel.
- *	It can be int, long, off_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t $lseektype		/* <offset> type */
-#define LSEEKSIZE $lseeksize		/* <offset> size */
-#define Off_t_size $lseeksize	/* <offset> size */
-
-/* Mode_t:
- *	This symbol holds the type used to declare file modes 
- *	for systems calls.  It is usually mode_t, but may be
- *	int or unsigned short.  It may be necessary to include <sys/types.h>
- *	to get any typedef'ed information.
- */
-#define Mode_t $modetype	 /* file mode parameter for system calls */
-
-/* Pid_t:
- *	This symbol holds the type used to declare process ids in the kernel.
- *	It can be int, uint, pid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t $pidtype		/* PID type */
-
-/* Size_t:
- *	This symbol holds the type used to declare length parameters
- *	for string functions.  It is usually size_t, but may be
- *	unsigned long, int, etc.  It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Size_t $sizetype	 /* length paramater for string functions */
-
-/* Uid_t_f:
- *	This symbol defines the format string used for printing a Uid_t.
- */
-#define	Uid_t_f		$uidformat		/**/
-
-/* Uid_t_size:
- *	This symbol holds the size of a Uid_t in bytes.
+/* HAS_LSEEK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the lseek() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern off_t lseek(int, off_t, int);
  */
-#define Uid_t_size $uidsize		/* UID size */
+#$d_lseekproto	HAS_LSEEK_PROTO	/**/
 
-/* Uid_t:
- *	This symbol holds the type used to declare user ids in the kernel.
- *	It can be int, ushort, uid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
+/* Sock_size_t:
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
-#define Uid_t $uidtype		/* UID type */
+#define Sock_size_t		$socksizetype /**/
 
 #endif
 !GROK!THIS!
diff --git a/win32/config.bc b/win32/config.bc
index d60890ff73..fe321aaccd 100644
--- a/win32/config.bc
+++ b/win32/config.bc
@@ -656,9 +656,9 @@ sleep=''
 smail=''
 small=''
 so='dll'
-sock_size_type='int *'
 sockethdr=''
 socketlib=''
+socksizetype='int'
 sort='sort'
 spackage='Perl5'
 spitshell=''
@@ -706,9 +706,9 @@ uname='uname'
 uniq='uniq'
 uquadtype='unsigned __int64'
 use5005threads='undef'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
 usedl='define'
-usefull64bits='undef'
 useithreads='undef'
 uselargefiles='undef'
 uselongdouble='undef'
diff --git a/win32/config.gc b/win32/config.gc
index 9faa2868be..9c6f1f6dce 100644
--- a/win32/config.gc
+++ b/win32/config.gc
@@ -656,9 +656,9 @@ sleep=''
 smail=''
 small=''
 so='dll'
-sock_size_type='int *'
 sockethdr=''
 socketlib=''
+socksizetype='int'
 sort='sort'
 spackage='Perl5'
 spitshell=''
@@ -706,9 +706,9 @@ uname='uname'
 uniq='uniq'
 uquadtype='unsigned long long'
 use5005threads='undef'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
 usedl='define'
-usefull64bits='undef'
 useithreads='undef'
 uselargefiles='undef'
 uselongdouble='undef'
diff --git a/win32/config.vc b/win32/config.vc
index d7ef9e476d..b98925bf66 100644
--- a/win32/config.vc
+++ b/win32/config.vc
@@ -656,9 +656,9 @@ sleep=''
 smail=''
 small=''
 so='dll'
-sock_size_type='int *'
 sockethdr=''
 socketlib=''
+socksizetype='int'
 sort='sort'
 spackage='Perl5'
 spitshell=''
@@ -706,10 +706,9 @@ uname='uname'
 uniq='uniq'
 uquadtype='unsigned __int64'
 use5005threads='undef'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
 usedl='define'
-usefull64bits='undef'
-useithreads='undef'
 uselargefiles='undef'
 uselongdouble='undef'
 usemorebits='undef'
diff --git a/win32/config_H.bc b/win32/config_H.bc
index bb35cb7556..868e9a35d6 100644
--- a/win32/config_H.bc
+++ b/win32/config_H.bc
@@ -1884,10 +1884,10 @@
 /*#define	HAS_SCM_RIGHTS	/**/
 
 /* Sock_size_t:
- *	This symbol holds the type used for the size argument
- *	of various socket calls.
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
-#define Sock_size_t		int * /**/
+#define Sock_size_t		int /**/
 
 /* HAS_SQRTL:
  *	This symbol, if defined, indicates that the sqrtl routine is
@@ -2766,30 +2766,30 @@
  */
 #define Uid_t uid_t		/* UID type */
 
-/* USE_64_BITS:
- *	This symbol, if defined, indicates that 64-bit integers should
- *	be used when available.  If not defined, the native integers
- *	will be employed (be they 32 or 64 bits).  The minimal possible
- *	64-bitness is used, just enough to get 64-bit integers into Perl.
- *	This may mean using for example "long longs", while your memory
- *	may still be limited to 2 gigabytes.
- */
-#ifndef USE_64_BITS
-/*#define	USE_64_BITS		/**/
-#endif
-
-/* USE_FULL_64_BITS:
- *	This variable conditionally defines the USE_FULL_64_BITS symbol,
+/* USE_64_BIT_ALL:
+ *	This variable conditionally defines the USE_64_BIT_ALL symbol,
  *	and indicates that 64-bit integer types should be used
  *	when available.  The maximal possible
  *	64-bitness is employed: LP64 or ILP64, meaning that you will
  *	be able to use more than 2 gigabytes of memory.  This mode is
- *	even more binary incompatible than USE_64_BITS. You may not
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
  *	be able to run the resulting executable in a 32-bit CPU at all or
  *	you may need at least to reboot your OS to 64-bit mode.
  */
-#ifndef USE_FULL_64_BITS
-/*#define	USE_FULL_64_BITS		/**/
+#ifndef USE_64_BIT_ALL
+/*#define	USE_64_BIT_ALL		/**/
+#endif
+
+/* USE_64_BIT_INT:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be employed (be they 32 or 64 bits).  The minimal possible
+ *	64-bitness is used, just enough to get 64-bit integers into Perl.
+ *	This may mean using for example "long longs", while your memory
+ *	may still be limited to 2 gigabytes.
+ */
+#ifndef USE_64_BIT_INT
+/*#define	USE_64_BIT_INT		/**/
 #endif
 
 /* USE_LARGE_FILES:
diff --git a/win32/config_H.gc b/win32/config_H.gc
index a3ac38ad66..e3ce507097 100644
--- a/win32/config_H.gc
+++ b/win32/config_H.gc
@@ -1884,10 +1884,10 @@
 /*#define	HAS_SCM_RIGHTS	/**/
 
 /* Sock_size_t:
- *	This symbol holds the type used for the size argument
- *	of various socket calls.
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
-#define Sock_size_t		int * /**/
+#define Sock_size_t		int /**/
 
 /* HAS_SQRTL:
  *	This symbol, if defined, indicates that the sqrtl routine is
@@ -2766,30 +2766,30 @@
  */
 #define Uid_t uid_t		/* UID type */
 
-/* USE_64_BITS:
- *	This symbol, if defined, indicates that 64-bit integers should
- *	be used when available.  If not defined, the native integers
- *	will be employed (be they 32 or 64 bits).  The minimal possible
- *	64-bitness is used, just enough to get 64-bit integers into Perl.
- *	This may mean using for example "long longs", while your memory
- *	may still be limited to 2 gigabytes.
- */
-#ifndef USE_64_BITS
-/*#define	USE_64_BITS		/**/
-#endif
-
-/* USE_FULL_64_BITS:
- *	This variable conditionally defines the USE_FULL_64_BITS symbol,
+/* USE_64_BIT_ALL:
+ *	This variable conditionally defines the USE_64_BIT_ALL symbol,
  *	and indicates that 64-bit integer types should be used
  *	when available.  The maximal possible
  *	64-bitness is employed: LP64 or ILP64, meaning that you will
  *	be able to use more than 2 gigabytes of memory.  This mode is
- *	even more binary incompatible than USE_64_BITS. You may not
+ *	even more binary incompatible than USE_64_BIT_ALL. You may not
  *	be able to run the resulting executable in a 32-bit CPU at all or
  *	you may need at least to reboot your OS to 64-bit mode.
  */
-#ifndef USE_FULL_64_BITS
-/*#define	USE_FULL_64_BITS		/**/
+#ifndef USE_64_BIT_ALL
+/*#define	USE_64_BIT_ALL		/**/
+#endif
+
+/* USE_64_BIT_INT:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be employed (be they 32 or 64 bits).  The minimal possible
+ *	64-bitness is used, just enough to get 64-bit integers into Perl.
+ *	This may mean using for example "long longs", while your memory
+ *	may still be limited to 2 gigabytes.
+ */
+#ifndef USE_64_BIT_INT
+/*#define	USE_64_BIT_INT		/**/
 #endif
 
 /* USE_LARGE_FILES:
diff --git a/win32/config_H.vc b/win32/config_H.vc
index c5d9738780..6677bcc4ce 100644
--- a/win32/config_H.vc
+++ b/win32/config_H.vc
@@ -1884,10 +1884,10 @@
 /*#define	HAS_SCM_RIGHTS	/**/
 
 /* Sock_size_t:
- *	This symbol holds the type used for the size argument
- *	of various socket calls.
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
  */
-#define Sock_size_t		int * /**/
+#define Sock_size_t		int /**/
 
 /* HAS_SQRTL:
  *	This symbol, if defined, indicates that the sqrtl routine is
@@ -2766,30 +2766,30 @@
  */
 #define Uid_t uid_t		/* UID type */
 
-/* USE_64_BITS:
- *	This symbol, if defined, indicates that 64-bit integers should
- *	be used when available.  If not defined, the native integers
- *	will be employed (be they 32 or 64 bits).  The minimal possible
- *	64-bitness is used, just enough to get 64-bit integers into Perl.
- *	This may mean using for example "long longs", while your memory
- *	may still be limited to 2 gigabytes.
- */
-#ifndef USE_64_BITS
-/*#define	USE_64_BITS		/**/
-#endif
-
-/* USE_FULL_64_BITS:
- *	This variable conditionally defines the USE_FULL_64_BITS symbol,
+/* USE_64_BIT_ALL:
+ *	This variable conditionally defines the USE_64_BIT_ALL symbol,
  *	and indicates that 64-bit integer types should be used
  *	when available.  The maximal possible
  *	64-bitness is employed: LP64 or ILP64, meaning that you will
  *	be able to use more than 2 gigabytes of memory.  This mode is
- *	even more binary incompatible than USE_64_BITS. You may not
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
  *	be able to run the resulting executable in a 32-bit CPU at all or
  *	you may need at least to reboot your OS to 64-bit mode.
  */
-#ifndef USE_FULL_64_BITS
-/*#define	USE_FULL_64_BITS		/**/
+#ifndef USE_64_BIT_ALL
+/*#define	USE_64_BIT_ALL		/**/
+#endif
+
+/* USE_64_BIT_INT:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be employed (be they 32 or 64 bits).  The minimal possible
+ *	64-bitness is used, just enough to get 64-bit integers into Perl.
+ *	This may mean using for example "long longs", while your memory
+ *	may still be limited to 2 gigabytes.
+ */
+#ifndef USE_64_BIT_INT
+/*#define	USE_64_BIT_INT		/**/
 #endif
 
 /* USE_LARGE_FILES: