Try to do something if st_size, st_uid, st_gid are too big for an IV;

regen Configure.

p4raw-id: //depot/cfgperl@4548

1 files changed, 140 insertions, 137 deletions

diff --git a/Porting/Glossary b/Porting/Glossary
index fe7d62a204..3d29644d64 100644
--- a/Porting/Glossary
+++ b/Porting/Glossary
@@ -4,6 +4,33 @@ programs (e.g. I_UNISTD) are already described in config_h.SH.  [`configpm'
 generates pod documentation for Config.pm from this file--please try to keep
 the formatting regular.]
 
+CONFIGDOTSH (Oldsyms.U):
+	This is set to 'true' in config.sh so that a shell script
+	sourcing config.sh can tell if it has been sourced already.
+
+Mcc (Loc.U):
+	This variable is used internally by Configure to determine the
+	full pathname (if any) of the Mcc program.  After Configure runs,
+	the value is reset to a plain "Mcc" and is not useful.
+
+PERL_APIVERSION (Oldsyms.U):
+	This value is manually set in patchlevel.h and is used
+	to set the Configure apiversion variable.
+
+PERL_REVISION (Oldsyms.U):
+	In a Perl version number such as 5.6.2, this is the 5.
+	This value is manually set in patchlevel.h
+
+PERL_SUBVERSION (Oldsyms.U):
+	In a Perl version number such as 5.6.2, this is the 2.
+	Values greater than 50 represent potentially unstable
+	development subversions.
+	This value is manually set in patchlevel.h
+
+PERL_VERSION (Oldsyms.U):
+	In a Perl version number such as 5.6.2, this is the 6.
+	This value is manually set in patchlevel.h
+
 _a (Unix.U):
 	This variable defines the extension used for ordinary libraries.
 	For unix, it is '.a'.  The '.' is included.  Other possible
@@ -206,10 +233,6 @@ compress (Loc.U):
 	This variable is defined but not used by Configure.
 	The value is a plain '' and is not useful.
 
-CONFIGDOTSH (Oldsyms.U):
-	This is set to 'true' in config.sh so that a shell script
-	sourcing config.sh can tell if it has been sourced already.
-
 contains (contains.U):
 	This variable holds the command to do a grep with a proper return
 	status.  On most sane systems it is simply "grep".  On insane systems
@@ -289,6 +312,64 @@ csh (Loc.U):
 	full pathname (if any) of the csh program.  After Configure runs,
 	the value is reset to a plain "csh" and is not useful.
 
+d_Gconvert (d_gconvert.U):
+	This variable holds what Gconvert is defined as to convert
+	floating point numbers into strings. It could be 'gconvert'
+	or a more complex macro emulating gconvert with gcvt() or sprintf.
+	Possible values are:
+	d_Gconvert='gconvert((x),(n),(t),(b))'
+	d_Gconvert='gcvt((x),(n),(b))'
+	d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+
+d_PRIEldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIFldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIGldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIX64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIX64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit hExADECimAl numbers.
+
+d_PRId64 (quadfio.U):
+	This variable conditionally defines the PERL_PRId64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit decimal numbers.
+
+d_PRIeldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIfldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIgldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIi64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIi64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit decimal numbers.
+
+d_PRIo64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIo64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit octal numbers.
+
+d_PRIu64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIu64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit unsigned decimal
+	numbers.
+
+d_PRIx64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIx64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit hexadecimal numbers.
+
 d_access (d_access.U):
 	This variable conditionally defines HAS_ACCESS if the access() system
 	call is available to check for access permissions using real IDs.
@@ -567,15 +648,6 @@ d_ftime (d_ftime.U):
 	that the ftime() routine exists.  The ftime() routine is basically
 	a sub-second accuracy clock.
 
-d_Gconvert (d_gconvert.U):
-	This variable holds what Gconvert is defined as to convert
-	floating point numbers into strings. It could be 'gconvert'
-	or a more complex macro emulating gconvert with gcvt() or sprintf.
-	Possible values are:
-	d_Gconvert='gconvert((x),(n),(t),(b))'
-	d_Gconvert='gcvt((x),(n),(b))'
-	d_Gconvert='sprintf((b),"%.*g",(n),(x))'
-
 d_getgrent (d_getgrent.U):
 	This variable conditionally defines the HAS_GETGRENT symbol, which
 	indicates to the C program that the getgrent() routine is available
@@ -962,55 +1034,6 @@ d_portable (d_portable.U):
 	indicates to the C program that it should not assume that it is
 	running on the machine it was compiled on.
 
-d_PRId64 (quadfio.U):
-	This variable conditionally defines the PERL_PRId64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit decimal numbers.
-
-d_PRIeldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIEldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIfldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIFldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIgldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIGldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIi64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIi64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit decimal numbers.
-
-d_PRIo64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIo64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit octal numbers.
-
-d_PRIu64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIu64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit unsigned decimal
-	numbers.
-
-d_PRIx64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIx64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit hexadecimal numbers.
-
-d_PRIX64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIX64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit hExADECimAl numbers.
-
 d_pthread_yield (d_pthread_y.U):
 	This variable conditionally defines the HAS_PTHREAD_YIELD
 	symbol if the pthread_yield routine is available to yield
@@ -1611,6 +1634,10 @@ extensions (Extensions.U):
 	and is typically used to test whether a particular extesion 
 	is available.
 
+fflushNULL (fflushall.U):
+	This symbol, if defined, tells that fflush(NULL) does flush
+	all pending stdio output.
+
 fflushall (fflushall.U):
 	This symbol, if defined, tells that to flush
 	all pending stdio output one must loop through all
@@ -1618,10 +1645,6 @@ fflushall (fflushall.U):
 	Note that if fflushNULL is defined, fflushall will not
 	even be probed for and will be left undefined.
 
-fflushNULL (fflushall.U):
-	This symbol, if defined, tells that fflush(NULL) does flush
-	all pending stdio output.
-
 find (Loc.U):
 	This variable is defined but not used by Configure.
 	The value is a plain '' and is not useful.
@@ -2390,11 +2413,6 @@ man3ext (man3dir.U):
 	have: one of 'n', 'l', or '3'.  The Makefile must supply the '.'.
 	See man3dir.
 
-Mcc (Loc.U):
-	This variable is used internally by Configure to determine the
-	full pathname (if any) of the Mcc program.  After Configure runs,
-	the value is reset to a plain "Mcc" and is not useful.
-
 medium (models.U):
 	This variable contains a flag which will tell the C compiler and loader
 	to produce a program running with a medium memory model.  If the
@@ -2578,24 +2596,6 @@ perl (Loc.U):
 	This variable is defined but not used by Configure.
 	The value is a plain '' and is not useful.
 
-PERL_APIVERSION (Oldsyms.U):
-	This value is manually set in patchlevel.h and is used
-	to set the Configure apiversion variable.
-
-PERL_REVISION (Oldsyms.U):
-	In a Perl version number such as 5.6.2, this is the 5.
-	This value is manually set in patchlevel.h
-
-PERL_SUBVERSION (Oldsyms.U):
-	In a Perl version number such as 5.6.2, this is the 2.
-	Values greater than 50 represent potentially unstable
-	development subversions.
-	This value is manually set in patchlevel.h
-
-PERL_VERSION (Oldsyms.U):
-	In a Perl version number such as 5.6.2, this is the 6.
-	This value is manually set in patchlevel.h
-
 perladmin (perladmin.U):
 	Electronic mail address of the perl5 administrator.
 
@@ -2722,6 +2722,54 @@ runnm (usenm.U):
 	nm extraction should be performed or not, according to the value
 	of usenm and the flags on the Configure command line.
 
+sPRIEldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'E') for output.
+
+sPRIFldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'F') for output.
+
+sPRIGldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'G') for output.
+
+sPRIX64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit hExADECimAl numbers (format 'X') for output.
+
+sPRId64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit decimal numbers (format 'd') for output.
+
+sPRIeldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'e') for output.
+
+sPRIfldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'f') for output.
+
+sPRIgldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'g') for output.
+
+sPRIi64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit decimal numbers (format 'i') for output.
+
+sPRIo64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit octal numbers (format 'o') for output.
+
+sPRIu64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit unsigned decimal numbers (format 'u') for output.
+
+sPRIx64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit hexadecimal numbers (format 'x') for output.
+
 sched_yield (d_pthread_y.U):
 	This variable defines the way to yield the execution
 	of the current thread.
@@ -2895,6 +2943,9 @@ siteprefixexp (siteprefix.U):
 	This variable holds the full absolute path of the directory below
 	which the user will install add-on packages.  Derived from siteprefix.
 
+sizesize (sizesize.U):
+	This variable contains the size of a sizetype in bytes.
+
 sizetype (sizetype.U):
 	This variable defines sizetype to be something like size_t, 
 	unsigned long, or whatever type is used to declare length 
@@ -2943,54 +2994,6 @@ split (models.U):
 	machines that support separation of instruction and data space.  It is
 	up to the Makefile to use this.
 
-sPRId64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit decimal numbers (format 'd') for output.
-
-sPRIeldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'e') for output.
-
-sPRIEldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'E') for output.
-
-sPRIfldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'f') for output.
-
-sPRIFldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'F') for output.
-
-sPRIgldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'g') for output.
-
-sPRIGldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'G') for output.
-
-sPRIi64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit decimal numbers (format 'i') for output.
-
-sPRIo64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit octal numbers (format 'o') for output.
-
-sPRIu64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit unsigned decimal numbers (format 'u') for output.
-
-sPRIx64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit hexadecimal numbers (format 'x') for output.
-
-sPRIX64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit hExADECimAl numbers (format 'X') for output.
-
 src (src.U):
 	This variable holds the path to the package source. It is up to
 	the Makefile to use this variable and set VPATH accordingly to