Try to do something if st_size, st_uid, st_gid are too big for an IV;

regen Configure.

p4raw-id: //depot/cfgperl@4548

3 files changed, 161 insertions, 142 deletions

diff --git a/Porting/Glossary b/Porting/Glossary
index fe7d62a204..3d29644d64 100644
--- a/Porting/Glossary
+++ b/Porting/Glossary
@@ -4,6 +4,33 @@ programs (e.g. I_UNISTD) are already described in config_h.SH.  [`configpm'
 generates pod documentation for Config.pm from this file--please try to keep
 the formatting regular.]
 
+CONFIGDOTSH (Oldsyms.U):
+	This is set to 'true' in config.sh so that a shell script
+	sourcing config.sh can tell if it has been sourced already.
+
+Mcc (Loc.U):
+	This variable is used internally by Configure to determine the
+	full pathname (if any) of the Mcc program.  After Configure runs,
+	the value is reset to a plain "Mcc" and is not useful.
+
+PERL_APIVERSION (Oldsyms.U):
+	This value is manually set in patchlevel.h and is used
+	to set the Configure apiversion variable.
+
+PERL_REVISION (Oldsyms.U):
+	In a Perl version number such as 5.6.2, this is the 5.
+	This value is manually set in patchlevel.h
+
+PERL_SUBVERSION (Oldsyms.U):
+	In a Perl version number such as 5.6.2, this is the 2.
+	Values greater than 50 represent potentially unstable
+	development subversions.
+	This value is manually set in patchlevel.h
+
+PERL_VERSION (Oldsyms.U):
+	In a Perl version number such as 5.6.2, this is the 6.
+	This value is manually set in patchlevel.h
+
 _a (Unix.U):
 	This variable defines the extension used for ordinary libraries.
 	For unix, it is '.a'.  The '.' is included.  Other possible
@@ -206,10 +233,6 @@ compress (Loc.U):
 	This variable is defined but not used by Configure.
 	The value is a plain '' and is not useful.
 
-CONFIGDOTSH (Oldsyms.U):
-	This is set to 'true' in config.sh so that a shell script
-	sourcing config.sh can tell if it has been sourced already.
-
 contains (contains.U):
 	This variable holds the command to do a grep with a proper return
 	status.  On most sane systems it is simply "grep".  On insane systems
@@ -289,6 +312,64 @@ csh (Loc.U):
 	full pathname (if any) of the csh program.  After Configure runs,
 	the value is reset to a plain "csh" and is not useful.
 
+d_Gconvert (d_gconvert.U):
+	This variable holds what Gconvert is defined as to convert
+	floating point numbers into strings. It could be 'gconvert'
+	or a more complex macro emulating gconvert with gcvt() or sprintf.
+	Possible values are:
+	d_Gconvert='gconvert((x),(n),(t),(b))'
+	d_Gconvert='gcvt((x),(n),(b))'
+	d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+
+d_PRIEldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIFldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIGldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIX64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIX64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit hExADECimAl numbers.
+
+d_PRId64 (quadfio.U):
+	This variable conditionally defines the PERL_PRId64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit decimal numbers.
+
+d_PRIeldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIfldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIgldbl (longdblfio.U):
+	This variable conditionally defines the PERL_PRIfldlbl symbol, which
+	indiciates that stdio has a symbol to print long doubles.
+
+d_PRIi64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIi64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit decimal numbers.
+
+d_PRIo64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIo64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit octal numbers.
+
+d_PRIu64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIu64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit unsigned decimal
+	numbers.
+
+d_PRIx64 (quadfio.U):
+	This variable conditionally defines the PERL_PRIx64 symbol, which
+	indiciates that stdio has a symbol to print 64-bit hexadecimal numbers.
+
 d_access (d_access.U):
 	This variable conditionally defines HAS_ACCESS if the access() system
 	call is available to check for access permissions using real IDs.
@@ -567,15 +648,6 @@ d_ftime (d_ftime.U):
 	that the ftime() routine exists.  The ftime() routine is basically
 	a sub-second accuracy clock.
 
-d_Gconvert (d_gconvert.U):
-	This variable holds what Gconvert is defined as to convert
-	floating point numbers into strings. It could be 'gconvert'
-	or a more complex macro emulating gconvert with gcvt() or sprintf.
-	Possible values are:
-	d_Gconvert='gconvert((x),(n),(t),(b))'
-	d_Gconvert='gcvt((x),(n),(b))'
-	d_Gconvert='sprintf((b),"%.*g",(n),(x))'
-
 d_getgrent (d_getgrent.U):
 	This variable conditionally defines the HAS_GETGRENT symbol, which
 	indicates to the C program that the getgrent() routine is available
@@ -962,55 +1034,6 @@ d_portable (d_portable.U):
 	indicates to the C program that it should not assume that it is
 	running on the machine it was compiled on.
 
-d_PRId64 (quadfio.U):
-	This variable conditionally defines the PERL_PRId64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit decimal numbers.
-
-d_PRIeldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIEldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIfldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIFldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIgldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIGldbl (longdblfio.U):
-	This variable conditionally defines the PERL_PRIfldlbl symbol, which
-	indiciates that stdio has a symbol to print long doubles.
-
-d_PRIi64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIi64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit decimal numbers.
-
-d_PRIo64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIo64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit octal numbers.
-
-d_PRIu64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIu64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit unsigned decimal
-	numbers.
-
-d_PRIx64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIx64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit hexadecimal numbers.
-
-d_PRIX64 (quadfio.U):
-	This variable conditionally defines the PERL_PRIX64 symbol, which
-	indiciates that stdio has a symbol to print 64-bit hExADECimAl numbers.
-
 d_pthread_yield (d_pthread_y.U):
 	This variable conditionally defines the HAS_PTHREAD_YIELD
 	symbol if the pthread_yield routine is available to yield
@@ -1611,6 +1634,10 @@ extensions (Extensions.U):
 	and is typically used to test whether a particular extesion 
 	is available.
 
+fflushNULL (fflushall.U):
+	This symbol, if defined, tells that fflush(NULL) does flush
+	all pending stdio output.
+
 fflushall (fflushall.U):
 	This symbol, if defined, tells that to flush
 	all pending stdio output one must loop through all
@@ -1618,10 +1645,6 @@ fflushall (fflushall.U):
 	Note that if fflushNULL is defined, fflushall will not
 	even be probed for and will be left undefined.
 
-fflushNULL (fflushall.U):
-	This symbol, if defined, tells that fflush(NULL) does flush
-	all pending stdio output.
-
 find (Loc.U):
 	This variable is defined but not used by Configure.
 	The value is a plain '' and is not useful.
@@ -2390,11 +2413,6 @@ man3ext (man3dir.U):
 	have: one of 'n', 'l', or '3'.  The Makefile must supply the '.'.
 	See man3dir.
 
-Mcc (Loc.U):
-	This variable is used internally by Configure to determine the
-	full pathname (if any) of the Mcc program.  After Configure runs,
-	the value is reset to a plain "Mcc" and is not useful.
-
 medium (models.U):
 	This variable contains a flag which will tell the C compiler and loader
 	to produce a program running with a medium memory model.  If the
@@ -2578,24 +2596,6 @@ perl (Loc.U):
 	This variable is defined but not used by Configure.
 	The value is a plain '' and is not useful.
 
-PERL_APIVERSION (Oldsyms.U):
-	This value is manually set in patchlevel.h and is used
-	to set the Configure apiversion variable.
-
-PERL_REVISION (Oldsyms.U):
-	In a Perl version number such as 5.6.2, this is the 5.
-	This value is manually set in patchlevel.h
-
-PERL_SUBVERSION (Oldsyms.U):
-	In a Perl version number such as 5.6.2, this is the 2.
-	Values greater than 50 represent potentially unstable
-	development subversions.
-	This value is manually set in patchlevel.h
-
-PERL_VERSION (Oldsyms.U):
-	In a Perl version number such as 5.6.2, this is the 6.
-	This value is manually set in patchlevel.h
-
 perladmin (perladmin.U):
 	Electronic mail address of the perl5 administrator.
 
@@ -2722,6 +2722,54 @@ runnm (usenm.U):
 	nm extraction should be performed or not, according to the value
 	of usenm and the flags on the Configure command line.
 
+sPRIEldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'E') for output.
+
+sPRIFldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'F') for output.
+
+sPRIGldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'G') for output.
+
+sPRIX64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit hExADECimAl numbers (format 'X') for output.
+
+sPRId64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit decimal numbers (format 'd') for output.
+
+sPRIeldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'e') for output.
+
+sPRIfldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'f') for output.
+
+sPRIgldbl (longdblfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format long doubles (format 'g') for output.
+
+sPRIi64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit decimal numbers (format 'i') for output.
+
+sPRIo64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit octal numbers (format 'o') for output.
+
+sPRIu64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit unsigned decimal numbers (format 'u') for output.
+
+sPRIx64 (quadfio.U):
+	This variable, if defined, contains the string used by stdio to
+	format 64-bit hexadecimal numbers (format 'x') for output.
+
 sched_yield (d_pthread_y.U):
 	This variable defines the way to yield the execution
 	of the current thread.
@@ -2895,6 +2943,9 @@ siteprefixexp (siteprefix.U):
 	This variable holds the full absolute path of the directory below
 	which the user will install add-on packages.  Derived from siteprefix.
 
+sizesize (sizesize.U):
+	This variable contains the size of a sizetype in bytes.
+
 sizetype (sizetype.U):
 	This variable defines sizetype to be something like size_t, 
 	unsigned long, or whatever type is used to declare length 
@@ -2943,54 +2994,6 @@ split (models.U):
 	machines that support separation of instruction and data space.  It is
 	up to the Makefile to use this.
 
-sPRId64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit decimal numbers (format 'd') for output.
-
-sPRIeldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'e') for output.
-
-sPRIEldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'E') for output.
-
-sPRIfldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'f') for output.
-
-sPRIFldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'F') for output.
-
-sPRIgldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'g') for output.
-
-sPRIGldbl (longdblfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format long doubles (format 'G') for output.
-
-sPRIi64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit decimal numbers (format 'i') for output.
-
-sPRIo64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit octal numbers (format 'o') for output.
-
-sPRIu64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit unsigned decimal numbers (format 'u') for output.
-
-sPRIx64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit hexadecimal numbers (format 'x') for output.
-
-sPRIX64 (quadfio.U):
-	This variable, if defined, contains the string used by stdio to
-	format 64-bit hExADECimAl numbers (format 'X') for output.
-
 src (src.U):
 	This variable holds the path to the package source. It is up to
 	the Makefile to use this variable and set VPATH accordingly to
diff --git a/Porting/config.sh b/Porting/config.sh
index 0cc61821e7..b8ac0698aa 100644
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -8,7 +8,7 @@
 
 # Package name      : perl5
 # Source directory  : .
-# Configuration time: Sat Oct 30 15:31:32 EET DST 1999
+# Configuration time: Thu Nov 11 21:42:49 EET 1999
 # Configured by     : jhi
 # Target system     : osf1 alpha.hut.fi v4.0 878 alpha 
 
@@ -53,10 +53,10 @@ cc='cc'
 cccdlflags=' '
 ccdlflags='  -Wl,-rpath,/opt/perl/lib/5.00563/alpha-dec_osf-thread/CORE'
 ccflags='-pthread -std -DLANGUAGE_C'
-ccsymbols='__LANGUAGE_C__=1 _LONGLONG=1 LANGUAGE_C=1 SYSTYPE_BSD=1'
+ccsymbols='LANGUAGE_C=1 SYSTYPE_BSD=1 _LONGLONG=1 __LANGUAGE_C__=1'
 cf_by='jhi'
 cf_email='yourname@yourhost.yourplace.com'
-cf_time='Sat Oct 30 15:31:32 EET DST 1999'
+cf_time='Thu Nov 11 21:42:49 EET 1999'
 charsize='1'
 chgrp=''
 chmod=''
@@ -69,7 +69,7 @@ cp='cp'
 cpio=''
 cpp='cpp'
 cpp_stuff='42'
-cppccsymbols='__alpha=1 __osf__=1 __unix__=1 _SYSTYPE_BSD=1 unix=1'
+cppccsymbols='_SYSTYPE_BSD=1 __alpha=1 __osf__=1 __unix__=1 unix=1'
 cppflags='-pthread -std -DLANGUAGE_C'
 cpplast=''
 cppminus=''
@@ -642,6 +642,7 @@ sitelib='/opt/perl/lib/site_perl'
 sitelibexp='/opt/perl/lib/site_perl'
 siteprefix='/opt/perl'
 siteprefixexp='/opt/perl'
+sizesize='8'
 sizetype='size_t'
 sleep=''
 smail=''
diff --git a/Porting/config_H b/Porting/config_H
index d9881cc562..d31265db07 100644
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -17,7 +17,7 @@
 /*
  * Package name      : perl5
  * Source directory  : .
- * Configuration time: Sat Oct 30 15:31:32 EET DST 1999
+ * Configuration time: Thu Nov 11 21:42:49 EET 1999
  * Configured by     : jhi
  * Target system     : osf1 alpha.hut.fi v4.0 878 alpha 
  */
@@ -2795,6 +2795,11 @@
  */
 #define	Gid_t_f		"u"		/**/
 
+/* Gid_t_size:
+ *	This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4		/* GID size */
+
 /* Gid_t:
  *	This symbol holds the return type of getgid() and the type of
  *	argument to setrgid() and related functions.  Typically,
@@ -2830,6 +2835,11 @@
  */
 #define Pid_t pid_t		/* PID type */
 
+/* Size_t_size:
+ *	This symbol holds the size of a Size_t in bytes.
+ */
+#define Size_t_size 8		/* */
+
 /* Size_t:
  *	This symbol holds the type used to declare length parameters
  *	for string functions.  It is usually size_t, but may be
@@ -2843,6 +2853,11 @@
  */
 #define	Uid_t_f		"u"		/**/
 
+/* Uid_t_size:
+ *	This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4		/* UID size */
+
 /* Uid_t:
  *	This symbol holds the type used to declare user ids in the kernel.
  *	It can be int, ushort, uid_t, etc... It may be necessary to include