Andy Dougherty's configuration patches (Config_63-01 up to 04).

p4raw-id: //depot/perl@845

3 files changed, 251 insertions, 126 deletions

diff --git a/Porting/Glossary b/Porting/Glossary
index b0840a990d..6a37060020 100644
--- a/Porting/Glossary
+++ b/Porting/Glossary
@@ -184,6 +184,11 @@ d_archlib (archlib.U):
 	of architecture-dependent library files for $package.  If
 	$archlib is the same as $privlib, then this is set to undef.
 
+d_attribut (d_attribut.U):
+	This variable conditionally defines HASATTRIBUTE, which
+	indicates the C compiler can check for function attributes,
+	such as printf formats.
+
 d_bcmp (d_bcmp.U):
 	This variable conditionally defines the HAS_BCMP symbol if
 	the bcmp() routine is available to compare strings.
@@ -200,6 +205,11 @@ d_bsdgetpgrp (d_getpgrp.U):
 	This variable conditionally defines USE_BSD_GETPGRP if
 	getpgrp needs one arguments whereas USG one needs none.
 
+d_bsdsetpgrp (d_setpgrp.U):
+	This variable conditionally defines USE_BSD_SETPGRP if
+	setpgrp needs two arguments whereas USG one needs none.
+	See also d_setpgid for a POSIX interface.
+
 d_bzero (d_bzero.U):
 	This variable conditionally defines the HAS_BZERO symbol if
 	the bzero() routine is available to set memory to 0.
@@ -384,6 +394,11 @@ d_gethbyaddr (d_gethbyad.U):
 	indicates to the C program that the gethostbyaddr() routine is available
 	to look up hosts by their IP addresses.
 
+d_gethbyname (d_gethbynm.U):
+	This variable conditionally defines the HAS_GETHOSTBYNAME symbol, which
+	indicates to the C program that the gethostbyname() routine is available
+	to look up host names in some data base or other.
+
 d_gethent (d_gethent.U):
 	This variable conditionally defines HAS_GETHOSTENT if gethostent() is
 	available to look up host names in some data base or another.
@@ -393,6 +408,12 @@ d_gethname (d_gethname.U):
 	indicates to the C program that the gethostname() routine may be
 	used to derive the host name.
 
+d_gethostprotos (d_gethostprotos.U):
+	This variable conditionally defines the HAS_GETHOST_PROTOS symbol,
+	which indicates to the C program that <netdb.h> supplies
+	prototypes for the various gethost*() functions.  
+	See also netdbtype.U for probing for various netdb types.
+
 d_getlogin (d_getlogin.U):
 	This variable conditionally defines the HAS_GETLOGIN symbol, which
 	indicates to the C program that the getlogin() routine is available
@@ -412,6 +433,12 @@ d_getnent (d_getnent.U):
 	This variable conditionally defines HAS_GETNETENT if getnetent() is
 	available to look up network names in some data base or another.
 
+d_getnetprotos (d_getnetprotos.U):
+	This variable conditionally defines the HAS_GETNET_PROTOS symbol,
+	which indicates to the C program that <netdb.h> supplies
+	prototypes for the various getnet*() functions.  
+	See also netdbtype.U for probing for various netdb types.
+
 d_getpbyname (d_getprotby.U):
 	This variable conditionally defines the HAS_GETPROTOBYNAME 
 	symbol, which indicates to the C program that the 
@@ -451,6 +478,12 @@ d_getprior (d_getprior.U):
 	This variable conditionally defines HAS_GETPRIORITY if getpriority()
 	is available to get a process's priority.
 
+d_getprotoprotos (d_getprotoprotos.U):
+	This variable conditionally defines the HAS_GETPROTO_PROTOS symbol,
+	which indicates to the C program that <netdb.h> supplies
+	prototypes for the various getproto*() functions.  
+	See also netdbtype.U for probing for various netdb types.
+
 d_getsbyname (d_getsrvby.U):
 	This variable conditionally defines the HAS_GETSERVBYNAME 
 	symbol, which indicates to the C program that the 
@@ -467,6 +500,12 @@ d_getsent (d_getsent.U):
 	This variable conditionally defines HAS_GETSERVENT if getservent() is
 	available to look up network services in some data base or another.
 
+d_getservprotos (d_getservprotos.U):
+	This variable conditionally defines the HAS_GETSERV_PROTOS symbol,
+	which indicates to the C program that <netdb.h> supplies
+	prototypes for the various getserv*() functions.  
+	See also netdbtype.U for probing for various netdb types.
+
 d_gettimeod (d_ftime.U):
 	This variable conditionally defines the HAS_GETTIMEOFDAY symbol, which
 	indicates that the gettimeofday() system call exists (to obtain a
@@ -513,6 +552,10 @@ d_longdbl (d_longdbl.U):
 	This variable conditionally defines HAS_LONG_DOUBLE if 
 	the long double type is supported.
 
+d_longlong (d_longlong.U):
+	This variable conditionally defines HAS_LONG_LONG if 
+	the long long type is supported.
+
 d_lstat (d_lstat.U):
 	This variable conditionally defines HAS_LSTAT if lstat() is
 	available to do file stats on symbolic links.
@@ -1205,6 +1248,11 @@ i_db (i_db.U):
 	This variable conditionally defines the I_DB symbol, and indicates
 	whether a C program may include Berkeley's DB include file <db.h>.
 
+i_dbm (i_dbm.U):
+	This variable conditionally defines the I_DBM symbol, which
+	indicates to the C program that <dbm.h> exists and should
+	be included.
+
 i_dirent (i_dirent.U):
 	This variable conditionally defines I_DIRENT, which indicates
 	to the C program that it should include <dirent.h>.
@@ -1228,6 +1276,11 @@ i_float (i_float.U):
 	whether a C program may include <float.h> to get symbols like DBL_MAX
 	or DBL_MIN, i.e. machine dependent floating point values.
 
+i_gdbm (i_gdbm.U):
+	This variable conditionally defines the I_GDBM symbol, which
+	indicates to the C program that <gdbm.h> exists and should
+	be included.
+
 i_grp (i_grp.U):
 	This variable conditionally defines the I_GRP symbol, and indicates
 	whether a C program should include <grp.h>.
@@ -1253,6 +1306,11 @@ i_memory (i_memory.U):
 	This variable conditionally defines the I_MEMORY symbol, and indicates
 	whether a C program should include <memory.h>.
 
+i_ndbm (i_ndbm.U):
+	This variable conditionally defines the I_NDBM symbol, which
+	indicates to the C program that <ndbm.h> exists and should
+	be included.
+
 i_netdb (i_netdb.U):
 	This variable conditionally defines the I_NETDB symbol, and indicates
 	whether a C program should include <netdb.h>.
@@ -1547,6 +1605,11 @@ longdblsize (d_longdbl.U):
 	indicates to the C program how many bytes there are in a long double,
 	if this system supports long doubles.
 
+longlongsize (d_longlong.U):
+	This variable contains the value of the LONGLONGSIZE symbol, which
+	indicates to the C program how many bytes there are in a long long,
+	if this system supports long long.
+
 longsize (intsize.U):
 	This variable contains the value of the LONGSIZE symbol, which
 	indicates to the C program how many bytes there are in a long.
@@ -1643,6 +1706,12 @@ mydomain (myhostname.U):
 	The domain must be appended to myhostname to form a complete host name.
 	The dot comes with mydomain, and need not be supplied by the program.
 
+myhostname (myhostname.U):
+	This variable contains the eventual value of the MYHOSTNAME symbol,
+	which is the name of the host the program is going to run on.
+	The domain is not kept with hostname, but must be gotten from mydomain.
+	The dot comes with mydomain, and need not be supplied by the program.
+
 myuname (Oldconfig.U):
 	The output of 'uname -a' if available, otherwise the hostname. On Xenix,
 	pseudo variables assignments in the output are stripped, thank you. The
@@ -1949,6 +2018,11 @@ split (models.U):
 	machines that support separation of instruction and data space.  It is
 	up to the Makefile to use this.
 
+src (src.U):
+	This variable holds the path to the package source. It is up to
+	the Makefile to use this variable and set VPATH accordingly to
+	find the sources remotely.
+
 ssizetype (ssizetype.U):
 	This variable defines ssizetype to be something like ssize_t, 
 	long or int.  It is used by functions that return a count 
diff --git a/Porting/config.sh b/Porting/config.sh
index b709411220..ff4f72528b 100644
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -8,7 +8,7 @@
 
 # Package name      : perl5
 # Source directory  : .
-# Configuration time: Mon Mar  9 14:20:14 EST 1998
+# Configuration time: Tue Mar 31 15:51:58 EST 1998
 # Configured by     : doughera
 # Target system     : linux fractal 2.0.33 #1 tue feb 3 10:11:46 est 1998 i686 unknown 
 
@@ -30,8 +30,8 @@ afs='false'
 alignbytes='4'
 aphostname=''
 ar='ar'
-archlib='/opt/perl/lib/i686-linux-thread/5.00462'
-archlibexp='/opt/perl/lib/i686-linux-thread/5.00462'
+archlib='/opt/perl/lib/i686-linux-thread/5.00463'
+archlibexp='/opt/perl/lib/i686-linux-thread/5.00463'
 archname='i686-linux-thread'
 archobjs=''
 awk='awk'
@@ -51,7 +51,7 @@ ccdlflags='-rdynamic'
 ccflags='-D_REENTRANT -Dbool=char -DHAS_BOOL -I/usr/local/include'
 cf_by='doughera'
 cf_email='yourname@yourhost.yourplace.com'
-cf_time='Mon Mar  9 14:20:14 EST 1998'
+cf_time='Tue Mar 31 15:51:58 EST 1998'
 chgrp=''
 chmod=''
 chown=''
@@ -124,10 +124,12 @@ d_gethbyaddr='define'
 d_gethbyname='define'
 d_gethent='define'
 d_gethname='undef'
+d_gethostprotos='define'
 d_getlogin='define'
 d_getnbyaddr='define'
 d_getnbyname='define'
 d_getnent='define'
+d_getnetprotos='define'
 d_getpbyname='define'
 d_getpbynumber='define'
 d_getpent='define'
@@ -136,9 +138,11 @@ d_getpgrp2='undef'
 d_getpgrp='define'
 d_getppid='define'
 d_getprior='define'
+d_getprotoprotos='define'
 d_getsbyname='define'
 d_getsbyport='define'
 d_getsent='define'
+d_getservprotos='define'
 d_gettimeod='define'
 d_gnulibc='define'
 d_htonl='define'
@@ -150,6 +154,7 @@ d_link='define'
 d_locconv='define'
 d_lockf='define'
 d_longdbl='define'
+d_longlong='define'
 d_lstat='define'
 d_mblen='define'
 d_mbstowcs='define'
@@ -298,7 +303,6 @@ fpostype='fpos_t'
 freetype='void'
 full_csh='/bin/csh'
 full_sed='/bin/sed'
-gcc=''
 gccversion='2.7.2.3'
 gidtype='gid_t'
 glibpth='/usr/shlib  /shlib /lib/pa1.1 /usr/lib/large /lib /usr/lib /usr/lib/386 /lib/386 /lib/large /usr/lib/small /lib/small /usr/ccs/lib /usr/ucblib /usr/local/lib '
@@ -366,7 +370,7 @@ i_varhdr='stdarg.h'
 i_vfork='undef'
 incpath=''
 inews=''
-installarchlib='/opt/perl/lib/i686-linux-thread/5.00462'
+installarchlib='/opt/perl/lib/i686-linux-thread/5.00463'
 installbin='/opt/perl/bin'
 installman1dir='/opt/perl/man/man1'
 installman3dir='/opt/perl/man/man3'
@@ -396,6 +400,7 @@ lns='/bin/ln -s'
 locincpth='/usr/local/include /opt/local/include /usr/gnu/include /opt/gnu/include /usr/GNU/include /opt/GNU/include'
 loclibpth='/usr/local/lib /opt/local/lib /usr/gnu/lib /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib'
 longdblsize='12'
+longlongsize='8'
 longsize='4'
 lp=''
 lpr=''
@@ -511,7 +516,7 @@ stdio_filbuf=''
 stdio_ptr='((fp)->_IO_read_ptr)'
 strings='/usr/include/string.h'
 submit=''
-subversion='62'
+subversion='63'
 sysman='/usr/man/man1'
 tail=''
 tar=''
@@ -544,5 +549,5 @@ xlibpth='/usr/lib/386 /lib/386'
 zcat=''
 zip='zip'
 PATCHLEVEL=4
-SUBVERSION=62
+SUBVERSION=63
 CONFIG=true
diff --git a/Porting/config_H b/Porting/config_H
index 52acfdc8e1..2f07d01ee4 100644
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -17,7 +17,7 @@
 /*
  * Package name      : perl5
  * Source directory  : .
- * Configuration time: Mon Mar  9 14:20:14 EST 1998
+ * Configuration time: Tue Mar 31 15:51:58 EST 1998
  * Configured by     : doughera
  * Target system     : linux fractal 2.0.33 #1 tue feb 3 10:11:46 est 1998 i686 unknown 
  */
@@ -641,17 +641,6 @@
 #define Shmat_t void *	/**/
 #define HAS_SHMAT_PROTOTYPE	/**/
 
-/* HAS_SOCKET:
- *	This symbol, if defined, indicates that the BSD socket interface is
- *	supported.
- */
-/* HAS_SOCKETPAIR:
- *	This symbol, if defined, indicates that the BSD socketpair() call is
- *	supported.
- */
-#define HAS_SOCKET		/**/
-#define HAS_SOCKETPAIR	/**/
-
 /* USE_STAT_BLOCKS:
  *	This symbol is defined if this system has a stat structure declaring
  *	st_blksize and st_blocks.
@@ -762,20 +751,6 @@
  */
 #define HAS_TCSETPGRP		/**/
 
-/* Time_t:
- *	This symbol holds the type returned by time(). It can be long,
- *	or time_t on BSD sites (in which case <sys/types.h> should be
- *	included).
- */
-#define Time_t time_t		/* Time type */
-
-/* HAS_TIMES:
- *	This symbol, if defined, indicates that the times() routine exists.
- *	Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES		/**/
-
 /* HAS_TRUNCATE:
  *	This symbol, if defined, indicates that the truncate routine is
  *	available to truncate files.
@@ -831,22 +806,6 @@
  */
 #define HAS_WCTOMB		/**/
 
-/* Fpos_t:
- *	This symbol holds the type used to declare file positions in libc.
- *	It can be fpos_t, long, uint, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t		/* File position type */
-
-/* Gid_t:
- *	This symbol holds the return type of getgid() and the type of
- *	argument to setrgid() and related functions.  Typically,
- *	it is the type of group ids in the kernel. It can be int, ushort,
- *	uid_t, etc... It may be necessary to include <sys/types.h> to get
- *	any typedef'ed information.
- */
-#define Gid_t gid_t		/* Type for getgid(), etc... */
-
 /* I_DBM:
  *	This symbol, if defined, indicates that <dbm.h> exists and should
  *	be included.
@@ -1059,12 +1018,6 @@
  */
 #define	I_SYS_TIMES		/**/
 
-/* I_SYS_TYPES:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/types.h>.
- */
-#define	I_SYS_TYPES		/**/
-
 /* I_SYS_UN:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <sys/un.h> to get UNIX domain socket definitions.
@@ -1134,13 +1087,6 @@
  */
 /*#define I_VFORK	/ **/
 
-/* Off_t:
- *	This symbol holds the type used to declare offsets in the kernel.
- *	It can be int, long, off_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Off_t off_t		/* <offset> type */
-
 /* Free_t:
  *	This variable contains the return type of free().  It is usually
  * void, but occasionally int.
@@ -1156,21 +1102,6 @@
  */
 /*#define MYMALLOC			/ **/
 
-/* Mode_t:
- *	This symbol holds the type used to declare file modes 
- *	for systems calls.  It is usually mode_t, but may be
- *	int or unsigned short.  It may be necessary to include <sys/types.h>
- *	to get any typedef'ed information.
- */
-#define Mode_t mode_t	 /* file mode parameter for system calls */
-
-/* Pid_t:
- *	This symbol holds the type used to declare process ids in the kernel.
- *	It can be int, uint, pid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t pid_t		/* PID type */
-
 /* CAN_PROTOTYPE:
  *	If defined, this macro indicates that the C compiler can handle
  *	function prototypes.
@@ -1198,27 +1129,12 @@
  */
 #define SH_PATH "/bin/sh"  /**/
 
-/* Size_t:
- *	This symbol holds the type used to declare length parameters
- *	for string functions.  It is usually size_t, but may be
- *	unsigned long, int, etc.  It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t	 /* length paramater for string functions */
-
 /* STDCHAR:
  *	This symbol is defined to be the type of char used in stdio.h.
  *	It has the values "unsigned char" or "char".
  */
 #define STDCHAR char	/**/
 
-/* Uid_t:
- *	This symbol holds the type used to declare user ids in the kernel.
- *	It can be int, ushort, uid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t		/* UID type */
-
 /* VOIDFLAGS:
  *	This symbol indicates how much support of the void type is given by this
  *	compiler.  What various bits mean:
@@ -1574,8 +1490,8 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "/opt/perl/lib/i686-linux-thread/5.00462"		/**/
-#define ARCHLIB_EXP "/opt/perl/lib/i686-linux-thread/5.00462"		/**/
+#define ARCHLIB "/opt/perl/lib/i686-linux-thread/5.00463"		/**/
+#define ARCHLIB_EXP "/opt/perl/lib/i686-linux-thread/5.00463"		/**/
 
 /* CAT2:
  *	This macro catenates 2 tokens together.
@@ -1713,6 +1629,20 @@
 #define LONG_DOUBLESIZE 12		/**/
 #endif
 
+/* HAS_LONG_LONG:
+ *	This symbol will be defined if the C compiler supports
+ *	long long.
+ */
+/* LONGLONGSIZE:
+ *	This symbol contains the size of a long long, so that the 
+ *	C preprocessor can make decisions based on it.  It is only
+ *	defined if the system supports long long.
+ */
+#define HAS_LONG_LONG		/**/
+#ifdef HAS_LONG_LONG
+#define LONGLONGSIZE 8		/**/
+#endif
+
 /* HAS_MKSTEMP:
  *	This symbol, if defined, indicates that the mkstemp routine is
  *	available to create and open a unique temporary file.
@@ -1757,6 +1687,17 @@
  */
 #define HAS_SETVBUF		/**/
 
+/* HAS_SOCKET:
+ *	This symbol, if defined, indicates that the BSD socket interface is
+ *	supported.
+ */
+/* HAS_SOCKETPAIR:
+ *	This symbol, if defined, indicates that the BSD socketpair() call is
+ *	supported.
+ */
+#define HAS_SOCKET		/**/
+#define HAS_SOCKETPAIR	/**/
+
 /* Signal_t:
  *	This symbol's value is either "void" or "int", corresponding to the
  *	appropriate return type of a signal handler.  Thus, you can declare
@@ -1784,6 +1725,12 @@
  */
 #define I_NETDB		/**/
 
+/* I_SYS_TYPES:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/types.h>.
+ */
+#define	I_SYS_TYPES		/**/
+
 /* PRIVLIB:
  *	This symbol contains the name of the private library for this package.
  *	The library is private in the sense that it needn't be in anyone's
@@ -1797,37 +1744,6 @@
 #define PRIVLIB "/opt/perl/lib"		/**/
 #define PRIVLIB_EXP "/opt/perl/lib"		/**/
 
-/* SIG_NAME:
- *	This symbol contains a list of signal names in order of
- *	signal number. This is intended
- *	to be used as a static array initialization, like this:
- *		char *sig_name[] = { SIG_NAME };
- *	The signals in the list are separated with commas, and each signal
- *	is surrounded by double quotes. There is no leading SIG in the signal
- *	name, i.e. SIGQUIT is known as "QUIT".
- *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- *	etc., where nn is the actual signal number (e.g. NUM37).
- *	The signal number for sig_name[i] is stored in sig_num[i].
- *	The last element is 0 to terminate the list with a NULL.  This
- *	corresponds to the 0 at the end of the sig_num list.
- */
-/* SIG_NUM:
- *	This symbol contains a list of signal numbers, in the same order as the
- *	SIG_NAME list. It is suitable for static array initialization, as in:
- *		int sig_num[] = { SIG_NUM };
- *	The signals in the list are separated with commas, and the indices
- *	within that list and the SIG_NAME list match, so it's easy to compute
- *	the signal name from a number or vice versa at the price of a small
- *	dynamic linear lookup. 
- *	Duplicates are allowed, but are moved to the end of the list.
- *	The signal number corresponding to sig_name[i] is sig_number[i].
- *	if (i < NSIG) then sig_number[i] == i.  
- *	The last element is 0, corresponding to the 0 at the end of
- *	the sig_name list.
- */
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "UNUSED", "IOT", "CLD", "POLL", 0		/**/
-#define SIG_NUM  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 6, 17, 29, 0			/**/
-
 /* SITEARCH:
  *	This symbol contains the name of the private library for this package.
  *	The library is private in the sense that it needn't be in anyone's
@@ -1907,6 +1823,38 @@
  */
 /*#define	USE_PERLIO		/ **/
 
+/* HAS_GETHOST_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for gethostent(), gethostbyname(), and
+ *	gethostbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETHOST_PROTOS	/**/
+
+/* HAS_GETNET_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getnetent(), getnetbyname(), and
+ *	getnetbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETNET_PROTOS	/**/
+
+/* HAS_GETPROTO_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getprotoent(), getprotobyname(), and
+ *	getprotobyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETPROTO_PROTOS	/**/
+
+/* HAS_GETSERV_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getservent(), getservbyname(), and
+ *	getservbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETSERV_PROTOS	/**/
+
 /* Netdb_host_t:
  *	This symbol holds the type used for the 1st argument
  *	to gethostbyaddr().
@@ -1936,6 +1884,37 @@
  */
 #define Select_fd_set_t 	fd_set *	/**/
 
+/* SIG_NAME:
+ *	This symbol contains a list of signal names in order of
+ *	signal number. This is intended
+ *	to be used as a static array initialization, like this:
+ *		char *sig_name[] = { SIG_NAME };
+ *	The signals in the list are separated with commas, and each signal
+ *	is surrounded by double quotes. There is no leading SIG in the signal
+ *	name, i.e. SIGQUIT is known as "QUIT".
+ *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ *	etc., where nn is the actual signal number (e.g. NUM37).
+ *	The signal number for sig_name[i] is stored in sig_num[i].
+ *	The last element is 0 to terminate the list with a NULL.  This
+ *	corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ *	This symbol contains a list of signal numbers, in the same order as the
+ *	SIG_NAME list. It is suitable for static array initialization, as in:
+ *		int sig_num[] = { SIG_NUM };
+ *	The signals in the list are separated with commas, and the indices
+ *	within that list and the SIG_NAME list match, so it's easy to compute
+ *	the signal name from a number or vice versa at the price of a small
+ *	dynamic linear lookup. 
+ *	Duplicates are allowed, but are moved to the end of the list.
+ *	The signal number corresponding to sig_name[i] is sig_number[i].
+ *	if (i < NSIG) then sig_number[i] == i.  
+ *	The last element is 0, corresponding to the 0 at the end of
+ *	the sig_name list.
+ */
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "UNUSED", "IOT", "CLD", "POLL", 0		/**/
+#define SIG_NUM  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 6, 17, 29, 0			/**/
+
 /* ARCHNAME:
  *	This symbol holds a string representing the architecture name.
  *	It may be used to construct an architecture-dependant pathname
@@ -1968,4 +1947,71 @@
 #define	USE_THREADS		/**/
 /*#define	OLD_PTHREADS_API		/ **/
 
+/* Time_t:
+ *	This symbol holds the type returned by time(). It can be long,
+ *	or time_t on BSD sites (in which case <sys/types.h> should be
+ *	included).
+ */
+#define Time_t time_t		/* Time type */
+
+/* HAS_TIMES:
+ *	This symbol, if defined, indicates that the times() routine exists.
+ *	Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES		/**/
+
+/* Fpos_t:
+ *	This symbol holds the type used to declare file positions in libc.
+ *	It can be fpos_t, long, uint, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t		/* File position type */
+
+/* Gid_t:
+ *	This symbol holds the return type of getgid() and the type of
+ *	argument to setrgid() and related functions.  Typically,
+ *	it is the type of group ids in the kernel. It can be int, ushort,
+ *	uid_t, etc... It may be necessary to include <sys/types.h> to get
+ *	any typedef'ed information.
+ */
+#define Gid_t gid_t		/* Type for getgid(), etc... */
+
+/* Off_t:
+ *	This symbol holds the type used to declare offsets in the kernel.
+ *	It can be int, long, off_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Off_t off_t		/* <offset> type */
+
+/* Mode_t:
+ *	This symbol holds the type used to declare file modes 
+ *	for systems calls.  It is usually mode_t, but may be
+ *	int or unsigned short.  It may be necessary to include <sys/types.h>
+ *	to get any typedef'ed information.
+ */
+#define Mode_t mode_t	 /* file mode parameter for system calls */
+
+/* Pid_t:
+ *	This symbol holds the type used to declare process ids in the kernel.
+ *	It can be int, uint, pid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t pid_t		/* PID type */
+
+/* Size_t:
+ *	This symbol holds the type used to declare length parameters
+ *	for string functions.  It is usually size_t, but may be
+ *	unsigned long, int, etc.  It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t	 /* length paramater for string functions */
+
+/* Uid_t:
+ *	This symbol holds the type used to declare user ids in the kernel.
+ *	It can be int, ushort, uid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t		/* UID type */
+
 #endif