Undo #7451, this seems to be a deficiency in Perforce,

there is no per-file line-terminator type, only per-client.

p4raw-id: //depot/perl@7452

1 files changed, 215 insertions, 215 deletions

diff --git a/README.dos b/README.dos
index 8d42f65e98..51cd1d6f18 100644
--- a/README.dos
+++ b/README.dos
@@ -1,215 +1,215 @@
-If you read this file _as_is_, just ignore the funny characters you

-see. It is written in the POD format (see perlpod manpage) which is

-specially designed to be readable as is.

-

-=head1 NAME

-

-perldos - Perl under DOS, W31, W95.

-

-=head1 SYNOPSIS

-

-These are instructions for building Perl under DOS (or w??), using

-DJGPP v2.01 or later. Under w95 long filenames are supported.

-

-=head1 DESCRIPTION

-

-Before you start, you should glance through the README file

-found in the top-level directory where the Perl distribution

-was extracted.  Make sure you read and understand the terms under

-which this software is being distributed.

-

-This port currently supports MakeMaker (the set of modules that

-is used to build extensions to perl).  Therefore, you should be

-able to build and install most extensions found in the CPAN sites.

-

-=head2 Prerequisites

-

-=over 4

-

-=item DJGPP

-

-DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit,

-protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible

-operating systems, by DJ Delorie <dj@delorie.com> and friends.

-

-For more details (FAQ), check out the home of DJGPP at:

-

-        http://www.delorie.com/djgpp/

-

-If you have questions about DJGPP, try posting to the DJGPP newsgroup:

-comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com.

-

-You can find the full DJGPP distribution on any SimTel.Net mirror all over

-the world. Like:

-

-        ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2*

-

-You need the following files to build perl (or add new modules):

-

-        v2/djdev202.zip

-        v2/bnu27b.zip

-        v2gnu/gcc2721b.zip

-        v2gnu/bsh1147b.zip

-        v2gnu/mak3761b.zip

-        v2gnu/fil316b.zip

-        v2gnu/sed118b.zip

-        v2gnu/txt122b.zip

-        v2gnu/dif271b.zip

-        v2gnu/grep21b.zip

-        v2gnu/shl112b.zip

-        v2gnu/gawk303b.zip

-        v2misc/csdpmi4b.zip 

-

-or possibly any newer version.

-

-=item Pthreads

-

-Thread support is not tested in this version of the djgpp perl.

-

-=back

-

-=head2 Shortcomings of Perl under DOS

-

-Perl under DOS lacks some features of perl under UNIX because of

-deficiencies in the UNIX-emulation, most notably:

-

-=over 4

-

-=item *

-

-fork() and pipe()

-

-=item *

-

-some features of the UNIX filesystem regarding link count and file dates

-

-=item *

-

-in-place operation is a little bit broken with short filenames

-

-=item *

-

-sockets

-

-=back

-

-=head2 Building

-

-=over 4

-

-=item *

-

-Unpack the source package F<perl5.6*.tar.gz> with djtarx. If you want

-to use long file names under w95 and also to get Perl to pass all its

-tests, don't forget to use

-

-        set LFN=y

-	set FNCASE=y

-

-before unpacking the archive.

-

-=item *

-

-Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin>

-directory.

-

-        ln -s bash.exe sh.exe

-

-And make the C<SHELL> environment variable point to this F<sh.exe>:

-

-        set SHELL=c:/djgpp/bin/sh.exe (use full path name!)

-

-You can do this in F<djgpp.env> too. Add this line BEFORE any section

-definition:

-

-        +SHELL=%DJDIR%/bin/sh.exe

-

-=item *

-

-If you have F<split.exe> and F<gsplit.exe> in your path, then rename 

-F<split.exe> to F<djsplit.exe>, and F<gsplit.exe> to F<split.exe>.

-Copy or link F<gecho.exe> to F<echo.exe> if you don't have F<echo.exe>.

-Copy or link F<gawk.exe> to F<awk.exe> if you don't have F<awk.exe>.

-

-=item *

-

-Chdir to the djgpp subdirectory of perl toplevel and type the following

-command:

-

-        configure.bat

-

-This will do some preprocessing then run the Configure script for you.

-The Configure script is interactive, but in most cases you

-just need to press ENTER.

-

-If the script says that your package is incomplete, and asks whether

-to continue, just answer with Y (this can only happen if you don't use

-long filenames).

-

-When Configure asks about the extensions, I suggest IO and Fcntl,

-and if you want database handling then SDBM_File or GDBM_File

-(you need to install gdbm for this one). If you want to use the

-POSIX extension (this is the default), make sure that the stack

-size of your F<cc1.exe> is at least 512kbyte (you can check this

-with: C<stubedit cc1.exe>).

-

-You can use the Configure script in non-interactive mode too.

-When I built my F<perl.exe>, I used something like this:

-

-        configure.bat -des

-

-You can find more info about Configure's command line switches in

-the F<INSTALL> file.

-

-When the script ends, and you want to change some values in the

-generated F<config.sh> file, then run

-

-        sh Configure -S

-

-after you made your modifications.

-

-IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG

-environment variable before running the script:

-

-        set CONFIG=

-

-=item *

-

-Now you can compile Perl. Type:

-

-        make

-

-=back

-

-=head2 Testing

-

-Type:

-

-        make test

-

-If you're lucky you should see "All tests successful". But there can be

-a few failed subtests (less than 5 hopefully) depending on some external

-conditions (e.g. some subtests fail under linux/dosemu or plain dos

-with short filenames only).

-

-=head2 Installation

-

-Type:

-

-        make install

-

-This will copy the newly compiled perl and libraries into your DJGPP

-directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>,

-and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation

-goes under C<($DJDIR)/lib/perl5/pod>.

-

-=head1 AUTHOR

-

-Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se>

-

-=head1 SEE ALSO

-

-perl(1).

-

-=cut

-

+If you read this file _as_is_, just ignore the funny characters you
+see. It is written in the POD format (see perlpod manpage) which is
+specially designed to be readable as is.
+
+=head1 NAME
+
+perldos - Perl under DOS, W31, W95.
+
+=head1 SYNOPSIS
+
+These are instructions for building Perl under DOS (or w??), using
+DJGPP v2.01 or later. Under w95 long filenames are supported.
+
+=head1 DESCRIPTION
+
+Before you start, you should glance through the README file
+found in the top-level directory where the Perl distribution
+was extracted.  Make sure you read and understand the terms under
+which this software is being distributed.
+
+This port currently supports MakeMaker (the set of modules that
+is used to build extensions to perl).  Therefore, you should be
+able to build and install most extensions found in the CPAN sites.
+
+=head2 Prerequisites
+
+=over 4
+
+=item DJGPP
+
+DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit,
+protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible
+operating systems, by DJ Delorie <dj@delorie.com> and friends.
+
+For more details (FAQ), check out the home of DJGPP at:
+
+        http://www.delorie.com/djgpp/
+
+If you have questions about DJGPP, try posting to the DJGPP newsgroup:
+comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com.
+
+You can find the full DJGPP distribution on any SimTel.Net mirror all over
+the world. Like:
+
+        ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2*
+
+You need the following files to build perl (or add new modules):
+
+        v2/djdev202.zip
+        v2/bnu27b.zip
+        v2gnu/gcc2721b.zip
+        v2gnu/bsh1147b.zip
+        v2gnu/mak3761b.zip
+        v2gnu/fil316b.zip
+        v2gnu/sed118b.zip
+        v2gnu/txt122b.zip
+        v2gnu/dif271b.zip
+        v2gnu/grep21b.zip
+        v2gnu/shl112b.zip
+        v2gnu/gawk303b.zip
+        v2misc/csdpmi4b.zip 
+
+or possibly any newer version.
+
+=item Pthreads
+
+Thread support is not tested in this version of the djgpp perl.
+
+=back
+
+=head2 Shortcomings of Perl under DOS
+
+Perl under DOS lacks some features of perl under UNIX because of
+deficiencies in the UNIX-emulation, most notably:
+
+=over 4
+
+=item *
+
+fork() and pipe()
+
+=item *
+
+some features of the UNIX filesystem regarding link count and file dates
+
+=item *
+
+in-place operation is a little bit broken with short filenames
+
+=item *
+
+sockets
+
+=back
+
+=head2 Building
+
+=over 4
+
+=item *
+
+Unpack the source package F<perl5.6*.tar.gz> with djtarx. If you want
+to use long file names under w95 and also to get Perl to pass all its
+tests, don't forget to use
+
+        set LFN=y
+	set FNCASE=y
+
+before unpacking the archive.
+
+=item *
+
+Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin>
+directory.
+
+        ln -s bash.exe sh.exe
+
+And make the C<SHELL> environment variable point to this F<sh.exe>:
+
+        set SHELL=c:/djgpp/bin/sh.exe (use full path name!)
+
+You can do this in F<djgpp.env> too. Add this line BEFORE any section
+definition:
+
+        +SHELL=%DJDIR%/bin/sh.exe
+
+=item *
+
+If you have F<split.exe> and F<gsplit.exe> in your path, then rename 
+F<split.exe> to F<djsplit.exe>, and F<gsplit.exe> to F<split.exe>.
+Copy or link F<gecho.exe> to F<echo.exe> if you don't have F<echo.exe>.
+Copy or link F<gawk.exe> to F<awk.exe> if you don't have F<awk.exe>.
+
+=item *
+
+Chdir to the djgpp subdirectory of perl toplevel and type the following
+command:
+
+        configure.bat
+
+This will do some preprocessing then run the Configure script for you.
+The Configure script is interactive, but in most cases you
+just need to press ENTER.
+
+If the script says that your package is incomplete, and asks whether
+to continue, just answer with Y (this can only happen if you don't use
+long filenames).
+
+When Configure asks about the extensions, I suggest IO and Fcntl,
+and if you want database handling then SDBM_File or GDBM_File
+(you need to install gdbm for this one). If you want to use the
+POSIX extension (this is the default), make sure that the stack
+size of your F<cc1.exe> is at least 512kbyte (you can check this
+with: C<stubedit cc1.exe>).
+
+You can use the Configure script in non-interactive mode too.
+When I built my F<perl.exe>, I used something like this:
+
+        configure.bat -des
+
+You can find more info about Configure's command line switches in
+the F<INSTALL> file.
+
+When the script ends, and you want to change some values in the
+generated F<config.sh> file, then run
+
+        sh Configure -S
+
+after you made your modifications.
+
+IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG
+environment variable before running the script:
+
+        set CONFIG=
+
+=item *
+
+Now you can compile Perl. Type:
+
+        make
+
+=back
+
+=head2 Testing
+
+Type:
+
+        make test
+
+If you're lucky you should see "All tests successful". But there can be
+a few failed subtests (less than 5 hopefully) depending on some external
+conditions (e.g. some subtests fail under linux/dosemu or plain dos
+with short filenames only).
+
+=head2 Installation
+
+Type:
+
+        make install
+
+This will copy the newly compiled perl and libraries into your DJGPP
+directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>,
+and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation
+goes under C<($DJDIR)/lib/perl5/pod>.
+
+=head1 AUTHOR
+
+Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se>
+
+=head1 SEE ALSO
+
+perl(1).
+
+=cut
+