perl 5.003_03: config_H

Updated to match current Configure and config_h.SH.
Some rearrangement of parts has occurred due to new
dependencies in the metaconfig units.

1 files changed, 195 insertions, 85 deletions

diff --git a/config_H b/config_H
index 0b87638f7c..d36ede2be2 100644
--- a/config_H
+++ b/config_H
@@ -14,9 +14,9 @@
  * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $
  */
 
-/* Configuration time: Mon Mar 18 23:11:24 EST 1996
- * Configured by: bailey
- * Target system: sunos agave.humgen.upenn.edu 5.4 generic_101945-13 sun4m sparc 
+/* Configuration time: Fri Aug 23 15:12:57 EDT 1996
+ * Configured by: doughera
+ * Target system: sunos fractal 5.5 generic i86pc i386 i86pc 
  */
 
 #ifndef _config_h_
@@ -32,7 +32,7 @@
  *	This symbol holds the path of the bin directory where the package will
  *	be installed. Program must be prepared to deal with ~name substitution.
  */
-#define BIN "/usr/local/bin"	/**/
+#define BIN "/opt/perl/bin"	/**/
 
 /* CAT2:
  *	This macro catenates 2 tokens together.
@@ -95,19 +95,19 @@
  *	This symbol is defined if the bcmp() routine is available to
  *	compare blocks of memory.
  */
-/*#define HAS_BCMP	/**/
+#define HAS_BCMP	/**/
 
 /* HAS_BCOPY:
  *	This symbol is defined if the bcopy() routine is available to
  *	copy blocks of memory.
  */
-/*#define HAS_BCOPY	/**/
+#define HAS_BCOPY	/**/
 
 /* HAS_BZERO:
  *	This symbol is defined if the bzero() routine is available to
  *	set a memory block to 0.
  */
-/*#define HAS_BZERO	/**/
+#define HAS_BZERO	/**/
 
 /* CASTI32:
  *	This symbol is defined if the C compiler can cast negative
@@ -300,7 +300,7 @@
  *	This symbol, if defined, indicates that the getpriority routine is
  *	available to get a process's priority.
  */
-/*#define HAS_GETPRIORITY		/**/
+#define HAS_GETPRIORITY		/**/
 
 /* HAS_HTONL:
  *	This symbol, if defined, indicates that the htonl() routine (and
@@ -338,7 +338,7 @@
  *	to kill process groups.  If unavailable, you probably should use kill
  *	with a negative process number.
  */
-/*#define HAS_KILLPG	/**/
+#define HAS_KILLPG	/**/
 
 /* HAS_LINK:
  *	This symbol, if defined, indicates that the link routine is
@@ -529,7 +529,7 @@
  *	probably use memmove() or memcpy(). If neither is defined, roll your
  *	own version.
  */
-/*#define HAS_SAFE_BCOPY	/**/
+#define HAS_SAFE_BCOPY	/**/
 
 /* HAS_SAFE_MEMCPY:
  *	This symbol, if defined, indicates that the memcpy routine is available
@@ -569,7 +569,7 @@
  *	available to change stderr or stdout from block-buffered or unbuffered
  *	to a line-buffered mode.
  */
-/*#define HAS_SETLINEBUF		/**/
+#define HAS_SETLINEBUF		/**/
 
 /* HAS_SETLOCALE:
  *	This symbol, if defined, indicates that the setlocale routine is
@@ -605,7 +605,7 @@
  *	This symbol, if defined, indicates that the setpriority routine is
  *	available to set a process's priority.
  */
-/*#define HAS_SETPRIORITY		/**/
+#define HAS_SETPRIORITY		/**/
 
 /* HAS_SETREGID:
  *	This symbol, if defined, indicates that the setregid routine is
@@ -617,7 +617,7 @@
  *	available to change the real, effective and saved gid of the current
  *	process.
  */
-/*#define HAS_SETREGID		/**/
+#define HAS_SETREGID		/**/
 /*#define HAS_SETRESGID		/**/
 
 /* HAS_SETREUID:
@@ -630,7 +630,7 @@
  *	available to change the real, effective and saved uid of the current
  *	process.
  */
-/*#define HAS_SETREUID		/**/
+#define HAS_SETREUID		/**/
 /*#define HAS_SETRESUID		/**/
 
 /* HAS_SETRGID:
@@ -701,18 +701,6 @@
  *	and FILE_cnt(fp) macros will also be defined and should be used
  *	to access these fields.
  */
-/* USE_STDIO_BASE:
- *	This symbol is defined if the _base field (or similar) of the
- *	stdio FILE structure can be used to access the stdio buffer for
- *	a file handle.  If this is defined, then the FILE_base(fp) macro
- *	will also be defined and should be used to access this field.
- *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
- *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
- *	will never be defined unless USE_STDIO_PTR is.
- */
-#define USE_STDIO_PTR 	/**/
-#define USE_STDIO_BASE 	/**/
-
 /* FILE_ptr:
  *	This macro is used to access the _ptr field (or equivalent) of the
  *	FILE structure pointed to by its argument. This macro will always be
@@ -731,13 +719,33 @@
  *	This symbol is defined if the FILE_cnt macro can be used as an
  *	lvalue.
  */
+/* FILE_filbuf:
+ *	This macro is used to access the internal stdio _filbuf function
+ *	(or equivalent), if STDIO_CNT_LVALUE and STDIO_PTR_LVALUE
+ *	are defined.  It is typically either _filbuf or __filbuf.
+ *	This macro will only be defined if both STDIO_CNT_LVALUE and
+ *	STDIO_PTR_LVALUE are defined.
+ */
+#define USE_STDIO_PTR 	/**/
 #ifdef USE_STDIO_PTR
 #define FILE_ptr(fp)	((fp)->_ptr)
 #define STDIO_PTR_LVALUE 		/**/
 #define FILE_cnt(fp)	((fp)->_cnt)
 #define STDIO_CNT_LVALUE 		/**/
+#if defined(STDIO_PTR_LVALUE) && defined(STDIO_CNT_LVALUE)
+#define FILE_filbuf(fp)	_filbuf(fp) 		/**/
+#endif
 #endif
 
+/* USE_STDIO_BASE:
+ *	This symbol is defined if the _base field (or similar) of the
+ *	stdio FILE structure can be used to access the stdio buffer for
+ *	a file handle.  If this is defined, then the FILE_base(fp) macro
+ *	will also be defined and should be used to access this field.
+ *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
+ *	will never be defined unless USE_STDIO_PTR is.
+ */
 /* FILE_base:
  *	This macro is used to access the _base field (or equivalent) of the
  *	FILE structure pointed to by its argument. This macro will always be
@@ -749,6 +757,7 @@
  *	structure pointed to its argument. This macro will always be defined
  *	if USE_STDIO_BASE is defined.
  */
+#define USE_STDIO_BASE 	/**/
 #ifdef USE_STDIO_BASE
 #define FILE_base(fp)	((fp)->_base)
 #define FILE_bufsiz(fp)	((fp)->_cnt + (fp)->_ptr - (fp)->_base)
@@ -911,7 +920,7 @@
 /* HAS_WAIT4:
  *	This symbol, if defined, indicates that wait4() exists.
  */
-/*#define HAS_WAIT4	/**/
+#define HAS_WAIT4	/**/
 
 /* HAS_WAITPID:
  *	This symbol, if defined, indicates that the waitpid routine is
@@ -1137,6 +1146,12 @@
  */
 #define I_SYS_PARAM		/**/
 
+/* I_SYS_RESOURCE:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/resource.h>.
+ */
+#define I_SYS_RESOURCE		/**/
+
 /* I_SYS_SELECT:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <sys/select.h> in order to get definition of struct timeval.
@@ -1161,6 +1176,12 @@
  */
 #define I_SYS_UN		/**/
 
+/* I_SYS_WAIT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/wait.h>.
+ */
+#define I_SYS_WAIT	/**/
+
 /* I_TERMIO:
  *	This symbol, if defined, indicates that the program should include
  *	<termio.h> rather than <sgtty.h>.  There are also differences in
@@ -1209,12 +1230,29 @@
  */
 #define I_UTIME		/**/
 
+/* I_STDARG:
+ *	This symbol, if defined, indicates that <stdarg.h> exists and should
+ *	be included.
+ */
+/* I_VARARGS:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <varargs.h>.
+ */
+#define I_STDARG		/**/
+/*#define I_VARARGS	/**/
+
 /* I_VFORK:
  *	This symbol, if defined, indicates to the C program that it should
  *	include vfork.h.
  */
 /*#define I_VFORK	/**/
 
+/* INTSIZE:
+ *	This symbol contains the size of an int, so that the C preprocessor
+ *	can make decisions based on it.
+ */
+#define INTSIZE 4		/**/
+
 /* Off_t:
  *	This symbol holds the type used to declare offsets in the kernel.
  *	It can be int, long, off_t, etc... It may be necessary to include
@@ -1260,7 +1298,7 @@
  *	is often a directory that is mounted across diverse architectures.
  *	Programs must be prepared to deal with ~name expansion.
  */
-#define SCRIPTDIR "/usr/local/script"	/**/
+#define SCRIPTDIR "/opt/perl/script"	/**/
 
 /* Select_fd_set_t:
  *	This symbol holds the type used for the 2nd, 3rd, and 4th
@@ -1278,16 +1316,6 @@
  */
 #define Size_t size_t	 /* length paramater for string functions */
 
-/* SSize_t:
- *	This symbol holds the type used by functions that return
- *	a count of bytes or an error condition.  It must be a signed type.
- *	It is usually ssize_t, but may be long or int, etc.
- *	It may be necessary to include <sys/types.h> or <unistd.h>
- *	to get any typedef'ed information.
- *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t ssize_t	 /* signed count of bytes */
-
 /* STDCHAR:
  *	This symbol is defined to be the type of char used in stdio.h.
  *	It has the values "unsigned char" or "char".
@@ -1301,34 +1329,56 @@
  */
 #define Uid_t uid_t		/* UID type */
 
-/* VMS:
- *	This symbol, if defined, indicates that the program is running under
- *	VMS.  It is currently only set in conjunction with the EUNICE symbol.
- */
-/*#define VMS		/**/
-
 /* LOC_SED:
  *	This symbol holds the complete pathname to the sed program.
  */
 #define LOC_SED 	"/bin/sed"	/**/
 
-/* ARCHLIB_EXP:
- *	This symbol contains the ~name expanded version of ARCHLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB_EXP "/usr/local/lib/perl5/i86pc-solaris/5.002"		/**/
-
 /* OSNAME:
  *	This symbol contains the name of the operating system, as determined
- *	by Configure.
+ *	by Configure.  You shouldn't rely on it too much; the specific
+ *	feature tests from Configure are generally more reliable.
  */
 #define OSNAME "solaris"		/**/
 
+/* ARCHLIB:
+ *	This variable, if defined, holds the name of the directory in
+ *	which the user wants to put architecture-dependent public
+ *	library files for perl5.  It is most often a local directory
+ *	such as /usr/local/lib.  Programs using this variable must be
+ *	prepared to deal with filename expansion.  If ARCHLIB is the
+ *	same as PRIVLIB, it is not defined, since presumably the
+ *	program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ *	This symbol contains the ~name expanded version of ARCHLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "/opt/perl/lib/i86pc-solaris/5.00303"		/**/
+#define ARCHLIB_EXP "/opt/perl/lib/i86pc-solaris/5.00303"		/**/
+
 /* BYTEORDER:
- *	This symbol hold the hexadecimal constant defined in byteorder,
+ *	This symbol holds the hexadecimal constant defined in byteorder,
  *	i.e. 0x1234 or 0x4321, etc...
- */
+ *	On NeXT 4 (and greater), you can build "Fat" Multiple Architecture
+ *	Binaries (MAB) on either big endian or little endian machines.
+ *	The endian-ness is available at compile-time.  This only matters
+ *	for perl, where the config.h can be generated and installed on 
+ *	one system, and used by a different architecture to build an
+ *	extension.  Older versions of NeXT that might not have
+ *	defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ *	so the default case (for NeXT) is big endian to catch them. 
+ *	This might matter for NeXT 3.0.
+ */
+#ifndef NeXT
 #define BYTEORDER 0x1234	/* large digits for MSB */
+#else  /* NeXT */
+#ifdef __LITTLE_ENDIAN__
+#define BYTEORDER 0x1234
+#else /* __BIG_ENDIAN__ */
+#define BYTEORDER 0x4321
+#endif /* ENDIAN CHECK */
+#endif /* NeXT */
 
 /* CSH:
  *	This symbol, if defined, indicates that the C-shell exists.
@@ -1381,26 +1431,34 @@
  */
 #define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
 
+/* USE_SFIO:
+ *	This symbol, if defined, indicates that sfio should
+ *	be used.
+ */
+/*#define	USE_SFIO		/**/
+
 /* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
  */
 /* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
+ *	This macro is used in the same way as sigsetjmp(), but will invoke
+ *	traditional setjmp() if sigsetjmp isn't available.
+ *	See HAS_SIGSETJMP.
  */
 /* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
+ *	This macro is used in the same way as siglongjmp(), but will invoke
+ *	traditional longjmp() if siglongjmp isn't available.
+ *	See HAS_SIGSETJMP.
  */
 #define HAS_SIGSETJMP	/**/
 #ifdef HAS_SIGSETJMP
 #define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask)
-#define Siglongjmp(buf,retval) siglongjmp(buf,retval)
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
 #else
 #define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp(buf)
-#define Siglongjmp(buf,retval) longjmp(buf,retval)
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
 #endif
 
 /* USE_DYNAMIC_LOADING:
@@ -1426,28 +1484,25 @@
  */
 #define	I_LOCALE		/**/
 
+/* I_SFIO:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sfio.h>.
+ */
+/*#define	I_SFIO		/**/
+
 /* I_SYS_STAT:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <sys/stat.h>.
  */
 #define	I_SYS_STAT		/**/
 
-/* I_STDARG:
- *	This symbol, if defined, indicates that <stdarg.h> exists and should
- *	be included.
- */
-/* I_VARARGS:
+/* I_VALUES:
  *	This symbol, if defined, indicates to the C program that it should
- *	include <varargs.h>.
+ *	include <values.h> to get definition of symbols like MINFLOAT or
+ *	MAXLONG, i.e. machine dependant limitations.  Probably, you
+ *	should use <limits.h> instead, if it is available.
  */
-#define I_STDARG		/**/
-/*#define I_VARARGS	/**/
-
-/* INTSIZE:
- *	This symbol contains the size of an int, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define INTSIZE 4		/**/
+#define I_VALUES		/**/
 
 /* Free_t:
  *	This variable contains the return type of free().  It is usually
@@ -1491,18 +1546,41 @@
 #define RD_NODATA -1
 #define EOF_NONBLOCK
 
+/* OLDARCHLIB:
+ *	This variable, if defined, holds the name of the directory in
+ *	which the user has perl5.000 or perl5.001 architecture-dependent
+ *	public library files for perl5.  For the most part, these
+ *	files will work with 5.002 (and later), but that is not
+ *	guaranteed.
+ */
 /* OLDARCHLIB_EXP:
  *	This symbol contains the ~name expanded version of OLDARCHLIB, to be
  *	used in programs that are not prepared to deal with ~ expansion at 
  *	run-time.
  */
+/*#define OLDARCHLIB ""		/**/
 /*#define OLDARCHLIB_EXP ""		/**/
 
+/* PRIVLIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ */
 /* PRIVLIB_EXP:
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB_EXP "/usr/local/lib/perl5"		/**/
+#define PRIVLIB "/opt/perl/lib"		/**/
+#define PRIVLIB_EXP "/opt/perl/lib"		/**/
+
+/* SH_PATH:
+ *	This symbol contains the full pathname to the shell used on this
+ *	on this system to execute Bourne shell scripts.  Usually, this will be
+ *	/bin/sh, though it's possible that some systems will have /bin/ksh,
+ *	/bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh.
+ */
+#define SH_PATH "/bin/sh"  /**/
 
 /* SIG_NAME:
  *	This symbol contains a list of signal names in order of
@@ -1532,32 +1610,64 @@
  *	The last element is 0, corresponding to the 0 at the end of
  *	the sig_name list.
  */
-#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","RTMIN","NUM37","NUM38","NUM39","NUM40","NUM41","NUM42","RTMAX","IOT","CLD","POLL",0	/**/
-#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,6,18,22,0	/**/
+#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","CANCEL","RTMIN","NUM38","NUM39","NUM40","NUM41","NUM42","NUM43","RTMAX","IOT","CLD","POLL",0	/**/
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,6,18,22,0	/**/
 
+/* SITEARCH:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	Individual sites may place their own extensions and modules in
+ *	this directory.
+ */
 /* SITEARCH_EXP:
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH_EXP "/usr/local/lib/perl5/site_perl/i86pc-solaris"		/**/
+#define SITEARCH "/opt/perl/lib/site_perl/i86pc-solaris"		/**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/i86pc-solaris"		/**/
 
+/* SITELIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	Individual sites may place their own extensions and modules in
+ *	this directory.
+ */
 /* SITELIB_EXP:
  *	This symbol contains the ~name expanded version of SITELIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITELIB_EXP "/usr/local/lib/perl5/site_perl"		/**/
+#define SITELIB "/opt/perl/lib/site_perl"		/**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl"		/**/
+
+/* SSize_t:
+ *	This symbol holds the type used by functions that return
+ *	a count of bytes or an error condition.  It must be a signed type.
+ *	It is usually ssize_t, but may be long or int, etc.
+ *	It may be necessary to include <sys/types.h> or <unistd.h>
+ *	to get any typedef'ed information.
+ *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t	 /* signed count of bytes */
 
 /* STARTPERL:
  *	This variable contains the string to put in front of a perl
  *	script to make sure (one hopes) that it runs with perl and not
  *	some shell.
  */
-#define STARTPERL "#!/usr/local/bin/perl"		/**/
+#define STARTPERL "#!/opt/perl/bin/perl"		/**/
 
-/* BIN_SH:
- *	This variable contains the path to the shell.
+/* USE_PERLIO:
+ *	This symbol, if defined, indicates that the PerlIO abstraction should
+ *	be used throughout.  If not defined, stdio should be
+ *	used in a fully backward compatible manner.
  */
-#define BIN_SH "/bin/sh"		/**/
+/*#define	USE_PERLIO		/**/
 
 /* VOIDFLAGS:
  *	This symbol indicates how much support of the void type is given by this