Metaconfig and Porting patches from Andy; start using the new

long long and long double thingies from #4804; regen Configure.

p4raw-id: //depot/cfgperl@4805

1 files changed, 912 insertions, 914 deletions

diff --git a/config_h.SH b/config_h.SH
index 2ecf108e52..92e54b0a74 100644
--- a/config_h.SH
+++ b/config_h.SH
@@ -1069,6 +1069,13 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$i_syssecrt   I_SYS_SECURITY	/**/
 
+/* OSNAME:
+ *	This symbol contains the name of the operating system, as determined
+ *	by Configure.  You shouldn't rely on it too much; the specific
+ *	feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "$osname"		/**/
+
 /* MEM_ALIGNBYTES:
  *	This symbol contains the number of bytes required to align a
  *	double. Usual values are 2, 4 and 8. The default is eight,
@@ -1080,6 +1087,61 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define MEM_ALIGNBYTES $alignbytes
 #endif
 
+/* ARCHLIB:
+ *	This variable, if defined, holds the name of the directory in
+ *	which the user wants to put architecture-dependent public
+ *	library files for $package.  It is most often a local directory
+ *	such as /usr/local/lib.  Programs using this variable must be
+ *	prepared to deal with filename expansion.  If ARCHLIB is the
+ *	same as PRIVLIB, it is not defined, since presumably the
+ *	program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ *	This symbol contains the ~name expanded version of ARCHLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#$d_archlib ARCHLIB "$archlib"		/**/
+#$d_archlib ARCHLIB_EXP "$archlibexp"		/**/
+
+/* ARCHNAME:
+ *	This symbol holds a string representing the architecture name.
+ *	It may be used to construct an architecture-dependant pathname
+ *	where library files may be held under a private library, for
+ *	instance.
+ */
+#define ARCHNAME "$archname"		/**/
+
+/* HAS_ATOLF:
+ *	This symbol, if defined, indicates that the atolf routine is
+ *	available to convert strings into long doubles.
+ */
+#$d_atolf HAS_ATOLF		/**/
+
+/* HAS_ATOLL:
+ *	This symbol, if defined, indicates that the atoll routine is
+ *	available to convert strings into long longs.
+ */
+#$d_atoll HAS_ATOLL		/**/
+
+/* BIN:
+ *	This symbol holds the path of the bin directory where the package will
+ *	be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ *	This symbol is the filename expanded version of the BIN symbol, for
+ *	programs that do not want to deal with that at run-time.
+ */
+#define BIN "$bin"	/**/
+#define BIN_EXP "$binexp"	/**/
+
+/* PERL_BINCOMPAT_5005:
+ *	This symbol, if defined, indicates that Perl 5.006 should be
+ *	binary-compatible with Perl 5.005.  This is impossible for builds
+ *	that use features like threads and multiplicity it is always $undef
+ *	for those versions.
+ */
+#$d_bincompat5005 PERL_BINCOMPAT_5005			/**/
+
 /* BYTEORDER:
  *	This symbol holds the hexadecimal constant defined in byteorder,
  *	i.e. 0x1234 or 0x4321, etc...
@@ -1123,406 +1185,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define BYTEORDER 0x$byteorder	/* large digits for MSB */
 #endif /* NeXT */
 
-/* CASTI32:
- *	This symbol is defined if the C compiler can cast negative
- *	or large floating point numbers to 32-bit ints.
- */
-#$d_casti32	CASTI32		/**/
-
-/* CASTNEGFLOAT:
- *	This symbol is defined if the C compiler can cast negative
- *	numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- *	This symbol contains flags that say what difficulties the compiler
- *	has casting odd floating values to unsigned long:
- *		0 = ok
- *		1 = couldn't cast < 0
- *		2 = couldn't cast >= 0x80000000
- *		4 = couldn't cast in argument expression list
- */
-#$d_castneg	CASTNEGFLOAT		/**/
-#define CASTFLAGS $castflags		/**/
-
-/* VOID_CLOSEDIR:
- *	This symbol, if defined, indicates that the closedir() routine
- *	does not return a value.
- */
-#$d_void_closedir VOID_CLOSEDIR		/**/
-
-/* HAS_FD_SET:
- *	This symbol, when defined, indicates presence of the fd_set typedef
- *	in <sys/types.h>
- */
-#$d_fd_set HAS_FD_SET	/**/
-
-/* Gconvert:
- *	This preprocessor macro is defined to convert a floating point
- *	number to a string without a trailing decimal point.  This
- *	emulates the behavior of sprintf("%g"), but is sometimes much more
- *	efficient.  If gconvert() is not available, but gcvt() drops the
- *	trailing decimal point, then gcvt() is used.  If all else fails,
- *	a macro using sprintf("%g") is used. Arguments for the Gconvert
- *	macro are: value, number of digits, whether trailing zeros should
- *	be retained, and the output buffer.
- *	Possible values are:
- *		d_Gconvert='gconvert((x),(n),(t),(b))'
- *		d_Gconvert='gcvt((x),(n),(b))'
- *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- *	The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) $d_Gconvert
-
-/* HAS_GNULIBC:
- *	This symbol, if defined, indicates to the C program that 
- *	the GNU C library is being used.
- */
-#$d_gnulibc HAS_GNULIBC  	/**/
-/* HAS_ISASCII:
- *	This manifest constant lets the C program know that isascii 
- *	is available.
- */
-#$d_isascii HAS_ISASCII		/**/
-
-/* HAS_LCHOWN:
- *	This symbol, if defined, indicates that the lchown routine is
- *	available to operate on a symbolic link (instead of following the
- *	link).
- */
-#$d_lchown HAS_LCHOWN		/**/
-
-/* HAS_OPEN3:
- *	This manifest constant lets the C program know that the three
- *	argument form of open(2) is available.
- */
-#$d_open3 HAS_OPEN3		/**/
-
-/* HAS_SAFE_BCOPY:
- *	This symbol, if defined, indicates that the bcopy routine is available
- *	to copy potentially overlapping memory blocks. Otherwise you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-#$d_safebcpy HAS_SAFE_BCOPY	/**/
-
-/* HAS_SAFE_MEMCPY:
- *	This symbol, if defined, indicates that the memcpy routine is available
- *	to copy potentially overlapping memory blocks. Otherwise you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-#$d_safemcpy HAS_SAFE_MEMCPY	/**/
-
-/* HAS_SANE_MEMCMP:
- *	This symbol, if defined, indicates that the memcmp routine is available
- *	and can be used to compare relative magnitudes of chars with their high
- *	bits set.  If it is not defined, roll your own version.
- */
-#$d_sanemcmp HAS_SANE_MEMCMP	/**/
-
-/* HAS_SIGACTION:
- *	This symbol, if defined, indicates that Vr4's sigaction() routine
- *	is available.
- */
-#$d_sigaction HAS_SIGACTION	/**/
-
-/* HAS_SIGSETJMP:
- *	This variable indicates to the C program that the sigsetjmp()
- *	routine is available to save the calling process's registers
- *	and stack environment for later use by siglongjmp(), and
- *	to optionally save the process's signal mask.  See
- *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- *	This macro is used in the same way as sigsetjmp(), but will invoke
- *	traditional setjmp() if sigsetjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- *	This macro is used in the same way as siglongjmp(), but will invoke
- *	traditional longjmp() if siglongjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-#$d_sigsetjmp HAS_SIGSETJMP	/**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_STDIO_PTR:
- *	This symbol is defined if the _ptr and _cnt fields (or similar)
- *	of the stdio FILE structure can be used to access the stdio buffer
- *	for a file handle.  If this is defined, then the FILE_ptr(fp)
- *	and FILE_cnt(fp) macros will also be defined and should be used
- *	to access these fields.
- */
-/* FILE_ptr:
- *	This macro is used to access the _ptr field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- *	This symbol is defined if the FILE_ptr macro can be used as an
- *	lvalue.
- */
-/* FILE_cnt:
- *	This macro is used to access the _cnt field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- *	This symbol is defined if the FILE_cnt macro can be used as an
- *	lvalue.
- */
-#$d_stdstdio USE_STDIO_PTR 	/**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp)	$stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE 		/**/
-#define FILE_cnt(fp)	$stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE 		/**/
-#endif
-
-/* USE_STDIO_BASE:
- *	This symbol is defined if the _base field (or similar) of the
- *	stdio FILE structure can be used to access the stdio buffer for
- *	a file handle.  If this is defined, then the FILE_base(fp) macro
- *	will also be defined and should be used to access this field.
- *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
- *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
- *	will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- *	This macro is used to access the _base field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- *	This macro is used to determine the number of bytes in the I/O
- *	buffer pointed to by _base field (or equivalent) of the FILE
- *	structure pointed to its argument. This macro will always be defined
- *	if USE_STDIO_BASE is defined.
- */
-#$d_stdiobase USE_STDIO_BASE 	/**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp)	$stdio_base
-#define FILE_bufsiz(fp)	$stdio_bufsiz
-#endif
-
-/* HAS_VPRINTF:
- *	This symbol, if defined, indicates that the vprintf routine is available
- *	to printf with a pointer to an argument list.  If unavailable, you
- *	may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- *	This symbol is defined if this system has vsprintf() returning type
- *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
- *	is up to the package author to declare vsprintf correctly based on the
- *	symbol.
- */
-#$d_vprintf HAS_VPRINTF	/**/
-#$d_charvspr USE_CHAR_VSPRINTF 	/**/
-
-/* DOUBLESIZE:
- *	This symbol contains the size of a double, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define DOUBLESIZE $doublesize		/**/
-
-/* I_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <time.h>.
- */
-/* I_SYS_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h> with KERNEL defined.
- */
-#$i_time I_TIME		/**/
-#$i_systime I_SYS_TIME		/**/
-#$i_systimek I_SYS_TIME_KERNEL		/**/
-
-/* VAL_O_NONBLOCK:
- *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- *	non-blocking I/O for the file descriptor. Note that there is no way
- *	back, i.e. you cannot turn it blocking again this way. If you wish to
- *	alternatively switch between blocking and non-blocking, use the
- *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- *	This symbol holds the errno error code set by read() when no data was
- *	present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- *	This symbol holds the return code from read() when no data is present
- *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- *	not defined, then you can't distinguish between no data and EOF by
- *	issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- *	This symbol, if defined, indicates to the C program that a read() on
- *	a non-blocking file descriptor will return 0 on EOF, and not the value
- *	held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
-
-/* PTRSIZE:
- *	This symbol contains the size of a pointer, so that the C preprocessor
- *	can make decisions based on it.  It will be sizeof(void *) if
- *	the compiler supports (void *); otherwise it will be
- *	sizeof(char *).
- */
-#define PTRSIZE $ptrsize		/**/
-
-/* Drand01:
- *	This macro is to be used to generate uniformly distributed
- *	random numbers over the range [0., 1.[.  You may have to supply
- *	an 'extern double drand48();' in your program since SunOS 4.1.3
- *	doesn't provide you with anything relevant in it's headers.
- *	See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- *	This symbol defines the type of the argument of the
- *	random seed function.
- */
-/* seedDrand01:
- *	This symbol defines the macro to be used in seeding the
- *	random number generator (see Drand01).
- */
-/* RANDBITS:
- *	This symbol indicates how many bits are produced by the
- *	function used to generate normalized random numbers.
- *	Values include 15, 16, 31, and 48.
- */
-#define Drand01()		$drand01		/**/
-#define Rand_seed_t		$randseedtype		/**/
-#define seedDrand01(x)	$seedfunc((Rand_seed_t)x)	/**/
-#define RANDBITS		$randbits		/**/
-
-/* SSize_t:
- *	This symbol holds the type used by functions that return
- *	a count of bytes or an error condition.  It must be a signed type.
- *	It is usually ssize_t, but may be long or int, etc.
- *	It may be necessary to include <sys/types.h> or <unistd.h>
- *	to get any typedef'ed information.
- *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t $ssizetype	 /* signed count of bytes */
-
-/* EBCDIC:
- *     This symbol, if defined, indicates that this system uses
- *	EBCDIC encoding.
- */
-#$ebcdic	EBCDIC 		/**/
-
-/* ARCHLIB:
- *	This variable, if defined, holds the name of the directory in
- *	which the user wants to put architecture-dependent public
- *	library files for $package.  It is most often a local directory
- *	such as /usr/local/lib.  Programs using this variable must be
- *	prepared to deal with filename expansion.  If ARCHLIB is the
- *	same as PRIVLIB, it is not defined, since presumably the
- *	program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- *	This symbol contains the ~name expanded version of ARCHLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_archlib ARCHLIB "$archlib"		/**/
-#$d_archlib ARCHLIB_EXP "$archlibexp"		/**/
-
-/* BIN:
- *	This symbol holds the path of the bin directory where the package will
- *	be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- *	This symbol is the filename expanded version of the BIN symbol, for
- *	programs that do not want to deal with that at run-time.
- */
-#define BIN "$bin"	/**/
-#define BIN_EXP "$binexp"	/**/
-
-/* INSTALL_USR_BIN_PERL:
- *	This symbol, if defined, indicates that Perl is to be installed
- * 	also as /usr/bin/perl.
- */
-#$installusrbinperl INSTALL_USR_BIN_PERL	/**/
-
-/* PRIVLIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- *	This symbol contains the ~name expanded version of PRIVLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "$privlib"		/**/
-#define PRIVLIB_EXP "$privlibexp"		/**/
-
-/* SITEARCH:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-dependent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITEARCH_EXP:
- *	This symbol contains the ~name expanded version of SITEARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITEARCH "$sitearch"		/**/
-#define SITEARCH_EXP "$sitearchexp"		/**/
-
-/* SITELIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-independent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITELIB_EXP:
- *	This symbol contains the ~name expanded version of SITELIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITELIB "$sitelib"		/**/
-#define SITELIB_EXP "$sitelibexp"		/**/
-
-/* PERL_VENDORLIB_EXP:
- *	This symbol contains the ~name expanded version of VENDORLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp"		/**/
-
-/* OSNAME:
- *	This symbol contains the name of the operating system, as determined
- *	by Configure.  You shouldn't rely on it too much; the specific
- *	feature tests from Configure are generally more reliable.
- */
-#define OSNAME "$osname"		/**/
-
 /* CAT2:
  *	This macro catenates 2 tokens together.
  */
@@ -1564,14 +1226,9 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  *	available directly to the user. Note that it may well be different from
  *	the preprocessor used to compile the C program.
  */
-/* CPPLAST:
- *	This symbol is intended to be used along with CPPRUN in the same manner
- *	symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
- */
 #define CPPSTDIN "$cppstdin"
 #define CPPMINUS "$cppminus"
 #define CPPRUN "$cpprun"
-#define CPPLAST "$cpplast"
 
 /* HAS_ACCESS:
  *	This manifest constant lets the C program know that the access()
@@ -1580,6 +1237,33 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_access HAS_ACCESS		/**/
 
+/* CASTI32:
+ *	This symbol is defined if the C compiler can cast negative
+ *	or large floating point numbers to 32-bit ints.
+ */
+#$d_casti32	CASTI32		/**/
+
+/* CASTNEGFLOAT:
+ *	This symbol is defined if the C compiler can cast negative
+ *	numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ *	This symbol contains flags that say what difficulties the compiler
+ *	has casting odd floating values to unsigned long:
+ *		0 = ok
+ *		1 = couldn't cast < 0
+ *		2 = couldn't cast >= 0x80000000
+ *		4 = couldn't cast in argument expression list
+ */
+#$d_castneg	CASTNEGFLOAT		/**/
+#define CASTFLAGS $castflags		/**/
+
+/* VOID_CLOSEDIR:
+ *	This symbol, if defined, indicates that the closedir() routine
+ *	does not return a value.
+ */
+#$d_void_closedir VOID_CLOSEDIR		/**/
+
 /* HAS_CSH:
  *	This symbol, if defined, indicates that the C-shell exists.
  */
@@ -1591,6 +1275,22 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define CSH "$full_csh"	/**/
 #endif
 
+/* DLSYM_NEEDS_UNDERSCORE:
+ *	This symbol, if defined, indicates that we need to prepend an
+ *	underscore to the symbol name before calling dlsym().  This only
+ *	makes sense if you *have* dlsym, which we will presume is the
+ *	case if you're using dl_dlopen.xs.
+ */
+#$d_dlsymun 	DLSYM_NEEDS_UNDERSCORE 	/**/
+
+/* HAS_DRAND48_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the drand48() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern double drand48 _((void));
+ */
+#$d_drand48proto	HAS_DRAND48_PROTO	/**/
+
 /* HAS_ENDGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for finalizing sequential access of the group database.
@@ -1627,6 +1327,58 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_endsent HAS_ENDSERVENT		/**/
 
+/* HAS_ENDSPENT:
+ *	This symbol, if defined, indicates that the endspent system call is
+ *	available to finalize the scan of SysV shadow password entries.
+ */
+#$d_endspent HAS_ENDSPENT		/**/
+
+/* HAS_FD_SET:
+ *	This symbol, when defined, indicates presence of the fd_set typedef
+ *	in <sys/types.h>
+ */
+#$d_fd_set HAS_FD_SET	/**/
+
+/* HAS_STRUCT_FS_DATA:
+ *	This symbol, if defined, indicates that the struct fs_data
+ *	to do statfs() is supported.
+ */
+#$d_fs_data_s HAS_STRUCT_FS_DATA	/**/
+
+/* HAS_FSEEKO:
+ *	This symbol, if defined, indicates that the fseeko routine is
+ *	available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_fseeko HAS_FSEEKO		/**/
+
+/* HAS_FSTATFS:
+ *	This symbol, if defined, indicates that the fstatfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+#$d_fstatfs HAS_FSTATFS		/**/
+/* HAS_FTELLO:
+ *	This symbol, if defined, indicates that the ftello routine is
+ *	available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_ftello HAS_FTELLO		/**/
+
+/* Gconvert:
+ *	This preprocessor macro is defined to convert a floating point
+ *	number to a string without a trailing decimal point.  This
+ *	emulates the behavior of sprintf("%g"), but is sometimes much more
+ *	efficient.  If gconvert() is not available, but gcvt() drops the
+ *	trailing decimal point, then gcvt() is used.  If all else fails,
+ *	a macro using sprintf("%g") is used. Arguments for the Gconvert
+ *	macro are: value, number of digits, whether trailing zeros should
+ *	be retained, and the output buffer.
+ *	Possible values are:
+ *		d_Gconvert='gconvert((x),(n),(t),(b))'
+ *		d_Gconvert='gcvt((x),(n),(b))'
+ *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ *	The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) $d_Gconvert
+
 /* HAS_GETGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for sequential access of the group database.
@@ -1668,11 +1420,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  *	so that it is safe even if used by a process with super-user
  *	privileges.
  */
-/* HAS_PHOSTNAME:
- *	This symbol, if defined, indicates that the C program may use the
- *	contents of PHOSTNAME as a command to feed to the popen() routine
- *	to derive the host name.
- */
 #$d_gethname HAS_GETHOSTNAME	/**/
 #$d_uname HAS_UNAME		/**/
 #$d_phostname HAS_PHOSTNAME
@@ -1680,6 +1427,26 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define PHOSTNAME "$aphostname"	/* How to get the host name */
 #endif
 
+/* HAS_GETHOST_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for gethostent(), gethostbyname(), and
+ *	gethostbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_gethostprotos	HAS_GETHOST_PROTOS	/**/
+
+/* HAS_GETMNT:
+ *	This symbol, if defined, indicates that the getmnt routine is
+ *	available to get filesystem mount info by filename.
+ */
+#$d_getmnt HAS_GETMNT		/**/
+
+/* HAS_GETMNTENT:
+ *	This symbol, if defined, indicates that the getmntent routine is
+ *	available to iterate through mounted file systems to get their info.
+ */
+#$d_getmntent HAS_GETMNTENT		/**/
+
 /* HAS_GETNETBYADDR:
  *	This symbol, if defined, indicates that the getnetbyaddr() routine is
  *	available to look up networks by their IP addresses.
@@ -1698,6 +1465,14 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_getnent HAS_GETNETENT		/**/
 
+/* HAS_GETNET_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getnetent(), getnetbyname(), and
+ *	getnetbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_getnetprotos	HAS_GETNET_PROTOS	/**/
+
 /* HAS_GETPROTOENT:
  *	This symbol, if defined, indicates that the getprotoent() routine is
  *	available to look up protocols in some data base or another.
@@ -1715,6 +1490,14 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_getpbyname HAS_GETPROTOBYNAME		/**/
 #$d_getpbynumber HAS_GETPROTOBYNUMBER		/**/
 
+/* HAS_GETPROTO_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getprotoent(), getprotobyname(), and
+ *	getprotobyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_getprotoprotos	HAS_GETPROTO_PROTOS	/**/
+
 /* HAS_GETPWENT:
  *	This symbol, if defined, indicates that the getpwent routine is
  *	available for sequential access of the passwd database.
@@ -1728,6 +1511,26 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_getsent HAS_GETSERVENT		/**/
 
+/* HAS_GETSERV_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getservent(), getservbyname(), and
+ *	getservbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_getservprotos	HAS_GETSERV_PROTOS	/**/
+
+/* HAS_GETSPENT:
+ *	This symbol, if defined, indicates that the getspent system call is
+ *	available to retrieve SysV shadow password entries sequentially.
+ */
+#$d_getspent HAS_GETSPENT		/**/
+
+/* HAS_GETSPNAM:
+ *	This symbol, if defined, indicates that the getspnam system call is
+ *	available to retrieve SysV shadow password entries by name.
+ */
+#$d_getspnam HAS_GETSPNAM		/**/
+
 /* HAS_GETSERVBYNAME:
  *	This symbol, if defined, indicates that the getservbyname()
  *	routine is available to look up services by their name.
@@ -1739,6 +1542,17 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_getsbyname HAS_GETSERVBYNAME		/**/
 #$d_getsbyport HAS_GETSERVBYPORT		/**/
 
+/* HAS_GNULIBC:
+ *	This symbol, if defined, indicates to the C program that 
+ *	the GNU C library is being used.
+ */
+#$d_gnulibc HAS_GNULIBC  	/**/
+/* HAS_HASMNTOPT:
+ *	This symbol, if defined, indicates that the hasmntopt routine is
+ *	available to query the mount options of file systems.
+ */
+#$d_hasmntopt HAS_HASMNTOPT		/**/
+
 /* HAS_HTONL:
  *	This symbol, if defined, indicates that the htonl() routine (and
  *	friends htons() ntohl() ntohs()) are available to do network
@@ -1764,6 +1578,27 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_htonl HAS_NTOHL		/**/
 #$d_htonl HAS_NTOHS		/**/
 
+/* HAS_ISASCII:
+ *	This manifest constant lets the C program know that isascii 
+ *	is available.
+ */
+#$d_isascii HAS_ISASCII		/**/
+
+/* HAS_LCHOWN:
+ *	This symbol, if defined, indicates that the lchown routine is
+ *	available to operate on a symbolic link (instead of following the
+ *	link).
+ */
+#$d_lchown HAS_LCHOWN		/**/
+
+/* HAS_LDBL_DIG:
+ *	This symbol, if defined, indicates that this system's <float.h>
+ *	or <limits.h> defines the symbol LDBL_DIG, which is the number
+ *	of significant digits in a long double precision number. Unlike
+ *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#$d_ldbl_dig HAS_LDBL_DIG 	/* */
+
 /* HAS_LONG_DOUBLE:
  *	This symbol will be defined if the C compiler supports long
  *	doubles.
@@ -1803,6 +1638,64 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_msg HAS_MSG		/**/
 
+/* HAS_OPEN3:
+ *	This manifest constant lets the C program know that the three
+ *	argument form of open(2) is available.
+ */
+#$d_open3 HAS_OPEN3		/**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ *	This symbol, if defined, indicates how to create pthread
+ *	in joinable (aka undetached) state.  NOTE: not defined
+ *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ *	(the new version of the constant).
+ *	If defined, known values are PTHREAD_CREATE_UNDETACHED
+ *	and __UNDETACHED.
+ */
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+
+/* HAS_PTHREAD_YIELD:
+ *	This symbol, if defined, indicates that the pthread_yield 
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ *	This symbol defines the way to yield the execution of
+ *	the current thread.  Known ways are sched_yield,
+ *	pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ *	This symbol, if defined, indicates that the sched_yield
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+#$d_pthread_yield HAS_PTHREAD_YIELD	/**/
+#define SCHED_YIELD	$sched_yield	/**/
+#$d_sched_yield HAS_SCHED_YIELD	/**/
+
+/* HAS_SAFE_BCOPY:
+ *	This symbol, if defined, indicates that the bcopy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+#$d_safebcpy HAS_SAFE_BCOPY	/**/
+
+/* HAS_SAFE_MEMCPY:
+ *	This symbol, if defined, indicates that the memcpy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+#$d_safemcpy HAS_SAFE_MEMCPY	/**/
+
+/* HAS_SANE_MEMCMP:
+ *	This symbol, if defined, indicates that the memcmp routine is available
+ *	and can be used to compare relative magnitudes of chars with their high
+ *	bits set.  If it is not defined, roll your own version.
+ */
+#$d_sanemcmp HAS_SANE_MEMCMP	/**/
+
 /* HAS_SEM:
  *	This symbol, if defined, indicates that the entire sem*(2) library is
  *	supported.
@@ -1852,6 +1745,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_setsent HAS_SETSERVENT		/**/
 
+/* HAS_SETSPENT:
+ *	This symbol, if defined, indicates that the setspent system call is
+ *	available to initialize the scan of SysV shadow password entries.
+ */
+#$d_setspent HAS_SETSPENT		/**/
+
 /* HAS_SETVBUF:
  *	This symbol, if defined, indicates that the setvbuf routine is
  *	available to change buffering on an open stdio stream.
@@ -1859,12 +1758,55 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$d_setvbuf HAS_SETVBUF		/**/
 
+/* USE_SFIO:
+ *	This symbol, if defined, indicates that sfio should
+ *	be used.
+ */
+#$d_sfio	USE_SFIO		/**/
+
 /* HAS_SHM:
  *	This symbol, if defined, indicates that the entire shm*(2) library is
  *	supported.
  */
 #$d_shm HAS_SHM		/**/
 
+/* HAS_SIGACTION:
+ *	This symbol, if defined, indicates that Vr4's sigaction() routine
+ *	is available.
+ */
+#$d_sigaction HAS_SIGACTION	/**/
+
+/* HAS_SIGSETJMP:
+ *	This variable indicates to the C program that the sigsetjmp()
+ *	routine is available to save the calling process's registers
+ *	and stack environment for later use by siglongjmp(), and
+ *	to optionally save the process's signal mask.  See
+ *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ *	This macro is used in the same way as sigsetjmp(), but will invoke
+ *	traditional setjmp() if sigsetjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ *	This macro is used in the same way as siglongjmp(), but will invoke
+ *	traditional longjmp() if siglongjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+#$d_sigsetjmp HAS_SIGSETJMP	/**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
 /* HAS_SOCKET:
  *	This symbol, if defined, indicates that the BSD socket interface is
  *	supported.
@@ -1912,6 +1854,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_msg_proxy	HAS_MSG_PROXY	/**/
 #$d_scm_rights	HAS_SCM_RIGHTS	/**/
 
+/* HAS_SQRTL:
+ *	This symbol, if defined, indicates that the sqrtl routine is
+ *	available to do long double square roots.
+ */
+#$d_sqrtl HAS_SQRTL		/**/
+
 /* USE_STAT_BLOCKS:
  *	This symbol is defined if this system has a stat structure declaring
  *	st_blksize and st_blocks.
@@ -1920,6 +1868,88 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_statblks USE_STAT_BLOCKS 	/**/
 #endif
 
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	does have the f_flags member containing the mount flags of
+ *	the filesystem containing the file.
+ *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
+ *	have statfs() and struct statfs, they have ustat() and getmnt()
+ *	with struct ustat and struct fs_data.
+ */
+#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS		/**/
+
+/* HAS_STRUCT_STATFS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	to do statfs() is supported.
+ */
+#$d_statfs_s HAS_STRUCT_STATFS	/**/
+
+/* HAS_FSTATVFS:
+ *	This symbol, if defined, indicates that the fstatvfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS		/**/
+
+/* USE_STDIO_PTR:
+ *	This symbol is defined if the _ptr and _cnt fields (or similar)
+ *	of the stdio FILE structure can be used to access the stdio buffer
+ *	for a file handle.  If this is defined, then the FILE_ptr(fp)
+ *	and FILE_cnt(fp) macros will also be defined and should be used
+ *	to access these fields.
+ */
+/* FILE_ptr:
+ *	This macro is used to access the _ptr field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ *	This symbol is defined if the FILE_ptr macro can be used as an
+ *	lvalue.
+ */
+/* FILE_cnt:
+ *	This macro is used to access the _cnt field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ *	This symbol is defined if the FILE_cnt macro can be used as an
+ *	lvalue.
+ */
+#$d_stdstdio USE_STDIO_PTR 	/**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp)	$stdio_ptr
+#$d_stdio_ptr_lval STDIO_PTR_LVALUE 		/**/
+#define FILE_cnt(fp)	$stdio_cnt
+#$d_stdio_cnt_lval STDIO_CNT_LVALUE 		/**/
+#endif
+
+/* USE_STDIO_BASE:
+ *	This symbol is defined if the _base field (or similar) of the
+ *	stdio FILE structure can be used to access the stdio buffer for
+ *	a file handle.  If this is defined, then the FILE_base(fp) macro
+ *	will also be defined and should be used to access this field.
+ *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
+ *	will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ *	This macro is used to access the _base field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ *	This macro is used to determine the number of bytes in the I/O
+ *	buffer pointed to by _base field (or equivalent) of the FILE
+ *	structure pointed to its argument. This macro will always be defined
+ *	if USE_STDIO_BASE is defined.
+ */
+#$d_stdiobase USE_STDIO_BASE 	/**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp)	$stdio_base
+#define FILE_bufsiz(fp)	$stdio_bufsiz
+#endif
+
 /* HAS_STRERROR:
  *	This symbol, if defined, indicates that the strerror routine is
  *	available to translate error numbers to strings. See the writeup
@@ -1939,6 +1969,46 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_syserrlst HAS_SYS_ERRLIST	/**/
 #define Strerror(e) $d_strerrm
 
+/* HAS_STRTOLD:
+ *	This symbol, if defined, indicates that the strtold routine is
+ *	available to convert strings to long doubles.
+ */
+#$d_strtold HAS_STRTOLD		/**/
+
+/* HAS_STRTOULL:
+ *	This symbol, if defined, indicates that the strtoull routine is
+ *	available to convert strings to unsigned long longs.
+ */
+#$d_strtoull HAS_STRTOULL		/**/
+
+/* HAS_STRTOUQ:
+ *	This symbol, if defined, indicates that the strtouq routine is
+ *	available to convert strings to unsigned long longs (quads).
+ */
+#$d_strtouq HAS_STRTOUQ		/**/
+
+/* HAS_TELLDIR_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the telldir() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern long telldir _((DIR*));
+ */
+#$d_telldirproto	HAS_TELLDIR_PROTO	/**/
+
+/* Time_t:
+ *	This symbol holds the type returned by time(). It can be long,
+ *	or time_t on BSD sites (in which case <sys/types.h> should be
+ *	included).
+ */
+#define Time_t $timetype		/* Time type */
+
+/* HAS_TIMES:
+ *	This symbol, if defined, indicates that the times() routine exists.
+ *	Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#$d_times HAS_TIMES		/**/
+
 /* HAS_UNION_SEMUN:
  *	This symbol, if defined, indicates that the union semun is
  *	defined by including <sys/sem.h>.  If not, the user code
@@ -1961,6 +2031,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_semctl_semun USE_SEMCTL_SEMUN	/**/
 #$d_semctl_semid_ds USE_SEMCTL_SEMID_DS	/**/
 
+/* HAS_USTAT:
+ *	This symbol, if defined, indicates that the ustat system call is
+ *	available to query file system statistics by dev_t.
+ */
+#$d_ustat HAS_USTAT		/**/
+
 /* HAS_VFORK:
  *	This symbol, if defined, indicates that vfork() exists.
  */
@@ -1974,6 +2050,78 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define Signal_t $signal_t	/* Signal handler's return type */
 
+/* HAS_VPRINTF:
+ *	This symbol, if defined, indicates that the vprintf routine is available
+ *	to printf with a pointer to an argument list.  If unavailable, you
+ *	may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ *	This symbol is defined if this system has vsprintf() returning type
+ *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
+ *	is up to the package author to declare vsprintf correctly based on the
+ *	symbol.
+ */
+#$d_vprintf HAS_VPRINTF	/**/
+#$d_charvspr USE_CHAR_VSPRINTF 	/**/
+
+/* USE_DYNAMIC_LOADING:
+ *	This symbol, if defined, indicates that dynamic loading of
+ *	some sort is available.
+ */
+#$usedl USE_DYNAMIC_LOADING		/**/
+
+/* DOUBLESIZE:
+ *	This symbol contains the size of a double, so that the C preprocessor
+ *	can make decisions based on it.
+ */
+#define DOUBLESIZE $doublesize		/**/
+
+/* EBCDIC:
+ *     This symbol, if defined, indicates that this system uses
+ *	EBCDIC encoding.
+ */
+#$ebcdic	EBCDIC 		/**/
+
+/* FFLUSH_NULL:
+ *	This symbol, if defined, tells that fflush(NULL) does flush
+ *	all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ *	This symbol, if defined, tells that to flush
+ *	all pending stdio output one must loop through all
+ *	the stdio file handles stored in an array and fflush them.
+ *	Note that if fflushNULL is defined, fflushall will not
+ *	even be probed for and will be left undefined.
+ */
+#$fflushNULL	FFLUSH_NULL 		/**/
+#$fflushall	FFLUSH_ALL 		/**/
+
+/* Fpos_t:
+ *	This symbol holds the type used to declare file positions in libc.
+ *	It can be fpos_t, long, uint, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t $fpostype		/* File position type */
+
+/* Gid_t_f:
+ *	This symbol defines the format string used for printing a Gid_t.
+ */
+#define	Gid_t_f		$gidformat		/**/
+
+/* Gid_t_size:
+ *	This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size $gidsize		/* GID size */
+
+/* Gid_t:
+ *	This symbol holds the return type of getgid() and the type of
+ *	argument to setrgid() and related functions.  Typically,
+ *	it is the type of group ids in the kernel. It can be int, ushort,
+ *	uid_t, etc... It may be necessary to include <sys/types.h> to get
+ *	any typedef'ed information.
+ */
+#define Gid_t $gidtype		/* Type for getgid(), etc... */
+
 /* Groups_t:
  *	This symbol holds the type used for the second argument to
  *	getgroups() and setgropus().  Usually, this is the same as
@@ -1987,6 +2135,19 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define Groups_t $groupstype	/* Type for 2nd arg to [sg]etgroups() */
 #endif
 
+/* DB_Prefix_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t	$db_hashtype		/**/
+#define DB_Prefix_t	$db_prefixtype  	/**/
+
 /* I_GRP:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <grp.h>.
@@ -1998,12 +2159,48 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$i_grp I_GRP		/**/
 #$d_grpasswd GRPASSWD	/**/
 
+/* I_INTTYPES:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <inttypes.h>.
+ */
+#$i_inttypes   I_INTTYPES                /**/
+
+/* I_MACH_CTHREADS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <mach/cthreads.h>.
+ */
+#$i_machcthr   I_MACH_CTHREADS	/**/
+
+/* I_MNTENT:
+ *	This symbol, if defined, indicates that <mntent.h> exists and
+ *	should be included.
+ */
+#$i_mntent	I_MNTENT		/**/
+
 /* I_NETDB:
  *	This symbol, if defined, indicates that <netdb.h> exists and
  *	should be included.
  */
 #$i_netdb I_NETDB		/**/
 
+/* I_NETINET_TCP:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <netinet/tcp.h>.
+ */
+#$i_netinettcp   I_NETINET_TCP                /**/
+
+/* I_POLL:
+ *	This symbol, if defined, indicates that <poll.h> exists and
+ *	should be included.
+ */
+#$i_poll	I_POLL		/**/
+
+/* I_PTHREAD:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <pthread.h>.
+ */
+#$i_pthread   I_PTHREAD	/**/
+
 /* I_PWD:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <pwd.h>.
@@ -2050,297 +2247,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_pwgecos PWGECOS	/**/
 #$d_pwpasswd PWPASSWD	/**/
 
-/* I_SYSUIO:
- *	This symbol, if defined, indicates that <sys/uio.h> exists and
- *	should be included.
- */
-#$i_sysuio	I_SYSUIO		/**/
-
-/* Free_t:
- *	This variable contains the return type of free().  It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- *	This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t $malloctype			/**/
-#define Free_t $freetype			/**/
-
-/* MYMALLOC:
- *	This symbol, if defined, indicates that we're using our own malloc.
- */
-#$d_mymalloc MYMALLOC			/**/
-
-/* SIG_NAME:
- *	This symbol contains a list of signal names in order of
- *	signal number. This is intended
- *	to be used as a static array initialization, like this:
- *		char *sig_name[] = { SIG_NAME };
- *	The signals in the list are separated with commas, and each signal
- *	is surrounded by double quotes. There is no leading SIG in the signal
- *	name, i.e. SIGQUIT is known as "QUIT".
- *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- *	etc., where nn is the actual signal number (e.g. NUM37).
- *	The signal number for sig_name[i] is stored in sig_num[i].
- *	The last element is 0 to terminate the list with a NULL.  This
- *	corresponds to the 0 at the end of the sig_num list.
- */
-/* SIG_NUM:
- *	This symbol contains a list of signal numbers, in the same order as the
- *	SIG_NAME list. It is suitable for static array initialization, as in:
- *		int sig_num[] = { SIG_NUM };
- *	The signals in the list are separated with commas, and the indices
- *	within that list and the SIG_NAME list match, so it's easy to compute
- *	the signal name from a number or vice versa at the price of a small
- *	dynamic linear lookup. 
- *	Duplicates are allowed, but are moved to the end of the list.
- *	The signal number corresponding to sig_name[i] is sig_number[i].
- *	if (i < NSIG) then sig_number[i] == i.  
- *	The last element is 0, corresponding to the 0 at the end of
- *	the sig_name list.
- */
-#define SIG_NAME $sig_name_init		/**/
-#define SIG_NUM  $sig_num_init		/**/
-
-/* VOIDFLAGS:
- *	This symbol indicates how much support of the void type is given by this
- *	compiler.  What various bits mean:
- *
- *	    1 = supports declaration of void
- *	    2 = supports arrays of pointers to functions returning void
- *	    4 = supports comparisons between pointers to void functions and
- *		    addresses of void functions
- *	    8 = suports declaration of generic void pointers
- *
- *	The package designer should define VOIDUSED to indicate the requirements
- *	of the package.  This can be done either by #defining VOIDUSED before
- *	including config.h, or by defining defvoidused in Myinit.U.  If the
- *	latter approach is taken, only those flags will be tested.  If the
- *	level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
-#endif
-#define VOIDFLAGS $voidflags
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int		/* is void to be avoided? */
-#define M_VOID			/* Xenix strikes again */
-#endif
-
-/* HAS_ATOLF:
- *	This symbol, if defined, indicates that the atolf routine is
- *	available to convert strings into long doubles.
- */
-#$d_atolf HAS_ATOLF		/**/
-
-/* HAS_ATOLL:
- *	This symbol, if defined, indicates that the atoll routine is
- *	available to convert strings into long longs.
- */
-#$d_atoll HAS_ATOLL		/**/
-
-/* PERL_BINCOMPAT_5005:
- *	This symbol, if defined, indicates that Perl 5.006 should be
- *	binary-compatible with Perl 5.005.  This is impossible for builds
- *	that use features like threads and multiplicity it is always $undef
- *	for those versions.
- */
-#$d_bincompat5005 PERL_BINCOMPAT_5005			/**/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- *	This symbol, if defined, indicates that we need to prepend an
- *	underscore to the symbol name before calling dlsym().  This only
- *	makes sense if you *have* dlsym, which we will presume is the
- *	case if you're using dl_dlopen.xs.
- */
-#$d_dlsymun 	DLSYM_NEEDS_UNDERSCORE 	/**/
-
-/* HAS_ENDSPENT:
- *	This symbol, if defined, indicates that the endspent system call is
- *	available to finalize the scan of SysV shadow password entries.
- */
-#$d_endspent HAS_ENDSPENT		/**/
-
-/* HAS_STRUCT_FS_DATA:
- *	This symbol, if defined, indicates that the struct fs_data
- *	to do statfs() is supported.
- */
-#$d_fs_data_s HAS_STRUCT_FS_DATA	/**/
-
-/* HAS_FSEEKO:
- *	This symbol, if defined, indicates that the fseeko routine is
- *	available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_fseeko HAS_FSEEKO		/**/
-
-/* HAS_FSTATFS:
- *	This symbol, if defined, indicates that the fstatfs routine is
- *	available to stat filesystems by file descriptors.
- */
-#$d_fstatfs HAS_FSTATFS		/**/
-/* HAS_FTELLO:
- *	This symbol, if defined, indicates that the ftello routine is
- *	available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_ftello HAS_FTELLO		/**/
-
-/* HAS_GETMNT:
- *	This symbol, if defined, indicates that the getmnt routine is
- *	available to get filesystem mount info by filename.
- */
-#$d_getmnt HAS_GETMNT		/**/
-
-/* HAS_GETMNTENT:
- *	This symbol, if defined, indicates that the getmntent routine is
- *	available to iterate through mounted file systems to get their info.
- */
-#$d_getmntent HAS_GETMNTENT		/**/
-
-/* HAS_GETSPENT:
- *	This symbol, if defined, indicates that the getspent system call is
- *	available to retrieve SysV shadow password entries sequentially.
- */
-#$d_getspent HAS_GETSPENT		/**/
-
-/* HAS_GETSPNAM:
- *	This symbol, if defined, indicates that the getspnam system call is
- *	available to retrieve SysV shadow password entries by name.
- */
-#$d_getspnam HAS_GETSPNAM		/**/
-
-/* HAS_HASMNTOPT:
- *	This symbol, if defined, indicates that the hasmntopt routine is
- *	available to query the mount options of file systems.
- */
-#$d_hasmntopt HAS_HASMNTOPT		/**/
-
-/* HAS_INT64_T:
- *     This symbol will defined if the C compiler supports int64_t.
- *     Usually the <inttypes.h> needs to be included, but sometimes
- *	<sys/types.h> is enough.
- */
-#$d_int64t     HAS_INT64_T               /**/
-
-/* HAS_LDBL_DIG:
- *	This symbol, if defined, indicates that this system's <float.h>
- *	or <limits.h> defines the symbol LDBL_DIG, which is the number
- *	of significant digits in a long double precision number. Unlike
- *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#$d_ldbl_dig HAS_LDBL_DIG 	/* */
-
-/* HAS_SETSPENT:
- *	This symbol, if defined, indicates that the setspent system call is
- *	available to initialize the scan of SysV shadow password entries.
- */
-#$d_setspent HAS_SETSPENT		/**/
-
-/* USE_SFIO:
- *	This symbol, if defined, indicates that sfio should
- *	be used.
- */
-#$d_sfio	USE_SFIO		/**/
-
-/* HAS_SQRTL:
- *	This symbol, if defined, indicates that the sqrtl routine is
- *	available to do long double square roots.
- */
-#$d_sqrtl HAS_SQRTL		/**/
-
-/* HAS_STRUCT_STATFS_F_FLAGS:
- *	This symbol, if defined, indicates that the struct statfs
- *	does have the f_flags member containing the mount flags of
- *	the filesystem containing the file.
- *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
- *	have statfs() and struct statfs, they have ustat() and getmnt()
- *	with struct ustat and struct fs_data.
- */
-#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS		/**/
-
-/* HAS_STRUCT_STATFS:
- *	This symbol, if defined, indicates that the struct statfs
- *	to do statfs() is supported.
- */
-#$d_statfs_s HAS_STRUCT_STATFS	/**/
-
-/* HAS_FSTATVFS:
- *	This symbol, if defined, indicates that the fstatvfs routine is
- *	available to stat filesystems by file descriptors.
- */
-#$d_fstatvfs HAS_FSTATVFS		/**/
-
-/* HAS_TELLDIR_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the telldir() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern long telldir _((DIR*));
- */
-#$d_telldirproto	HAS_TELLDIR_PROTO	/**/
-
-/* HAS_USTAT:
- *	This symbol, if defined, indicates that the ustat system call is
- *	available to query file system statistics by dev_t.
- */
-#$d_ustat HAS_USTAT		/**/
-
-/* USE_DYNAMIC_LOADING:
- *	This symbol, if defined, indicates that dynamic loading of
- *	some sort is available.
- */
-#$usedl USE_DYNAMIC_LOADING		/**/
-
-/* FFLUSH_NULL:
- *	This symbol, if defined, tells that fflush(NULL) does flush
- *	all pending stdio output.
- */
-/* FFLUSH_ALL:
- *	This symbol, if defined, tells that to flush
- *	all pending stdio output one must loop through all
- *	the stdio file handles stored in an array and fflush them.
- *	Note that if fflushNULL is defined, fflushall will not
- *	even be probed for and will be left undefined.
- */
-#$fflushNULL	FFLUSH_NULL 		/**/
-#$fflushall	FFLUSH_ALL 		/**/
-
-/* DB_Prefix_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is size_t.
- */
-#define DB_Hash_t	$db_hashtype		/**/
-#define DB_Prefix_t	$db_prefixtype  	/**/
-
-/* I_INTTYPES:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <inttypes.h>.
- */
-#$i_inttypes   I_INTTYPES                /**/
-
-/* I_MNTENT:
- *	This symbol, if defined, indicates that <mntent.h> exists and
- *	should be included.
- */
-#$i_mntent	I_MNTENT		/**/
-
-/* I_NETINET_TCP:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <netinet/tcp.h>.
- */
-#$i_netinettcp   I_NETINET_TCP                /**/
-
-/* I_POLL:
- *	This symbol, if defined, indicates that <poll.h> exists and
- *	should be included.
- */
-#$i_poll	I_POLL		/**/
-
 /* I_SHADOW:
  *	This symbol, if defined, indicates that <shadow.h> exists and
  *	should be included.
@@ -2370,18 +2276,49 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #$i_sysstatvfs	I_SYS_STATVFS		/**/
 
+/* I_SYSUIO:
+ *	This symbol, if defined, indicates that <sys/uio.h> exists and
+ *	should be included.
+ */
+#$i_sysuio	I_SYSUIO		/**/
+
 /* I_SYS_VFS:
  *	This symbol, if defined, indicates that <sys/vfs.h> exists and
  *	should be included.
  */
 #$i_sysvfs	I_SYS_VFS		/**/
 
+/* I_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <time.h>.
+ */
+/* I_SYS_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h> with KERNEL defined.
+ */
+#$i_time I_TIME		/**/
+#$i_systime I_SYS_TIME		/**/
+#$i_systimek I_SYS_TIME_KERNEL		/**/
+
 /* I_USTAT:
  *	This symbol, if defined, indicates that <ustat.h> exists and
  *	should be included.
  */
 #$i_ustat	I_USTAT		/**/
 
+/* PERL_INC_VERSION_LIST:
+ *	This variable specifies the list of subdirectories in over
+ *	which perl.c:incpush() and lib/lib.pm will automatically
+ *	search when adding directories to @INC, in a format suitable
+ *	for a C initialization string.  See the inc_version_list entry
+ *	in Porting/Glossary for more details.
+ */
+#define PERL_INC_VERSION_LIST $inc_version_list		/**/
+
 /* HAS_OFF64_T:
  *	This symbol will be defined if the C compiler supports off64_t.
  */
@@ -2402,6 +2339,92 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_PRIfldbl PERL_PRIfldbl	$sPRIfldbl	/**/
 #$d_PRIgldbl PERL_PRIgldbl	$sPRIgldbl	/**/
 
+/* Off_t:
+ *	This symbol holds the type used to declare offsets in the kernel.
+ *	It can be int, long, off_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t $lseektype		/* <offset> type */
+#define LSEEKSIZE $lseeksize		/* <offset> size */
+#define Off_t_size $lseeksize	/* <offset> size */
+
+/* Free_t:
+ *	This variable contains the return type of free().  It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ *	This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t $malloctype			/**/
+#define Free_t $freetype			/**/
+
+/* MYMALLOC:
+ *	This symbol, if defined, indicates that we're using our own malloc.
+ */
+#$d_mymalloc MYMALLOC			/**/
+
+/* Mode_t:
+ *	This symbol holds the type used to declare file modes 
+ *	for systems calls.  It is usually mode_t, but may be
+ *	int or unsigned short.  It may be necessary to include <sys/types.h>
+ *	to get any typedef'ed information.
+ */
+#define Mode_t $modetype	 /* file mode parameter for system calls */
+
+/* VAL_O_NONBLOCK:
+ *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ *	non-blocking I/O for the file descriptor. Note that there is no way
+ *	back, i.e. you cannot turn it blocking again this way. If you wish to
+ *	alternatively switch between blocking and non-blocking, use the
+ *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ *	This symbol holds the errno error code set by read() when no data was
+ *	present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ *	This symbol holds the return code from read() when no data is present
+ *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ *	not defined, then you can't distinguish between no data and EOF by
+ *	issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ *	This symbol, if defined, indicates to the C program that a read() on
+ *	a non-blocking file descriptor will return 0 on EOF, and not the value
+ *	held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK $o_nonblock
+#define VAL_EAGAIN $eagain
+#define RD_NODATA $rd_nodata
+#$d_eofnblk EOF_NONBLOCK
+
+/* Netdb_host_t:
+ *	This symbol holds the type used for the 1st argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ *	This symbol holds the type used for the 2nd argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ *	This symbol holds the type used for the argument to
+ *	gethostbyname().
+ */
+/* Netdb_net_t:
+ *	This symbol holds the type used for the 1st argument to
+ *	getnetbyaddr().
+ */
+#define Netdb_host_t		$netdb_host_type /**/
+#define Netdb_hlen_t		$netdb_hlen_type /**/
+#define Netdb_name_t		$netdb_name_type /**/
+#define Netdb_net_t		$netdb_net_type /**/
+
 /* IVTYPE:
  *	This symbol defines the C type used for Perl's IV.
  */
@@ -2512,6 +2535,59 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define	UVof		$uvoformat		/**/
 #define	UVxf		$uvxformat		/**/
 
+/* Pid_t:
+ *	This symbol holds the type used to declare process ids in the kernel.
+ *	It can be int, uint, pid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t $pidtype		/* PID type */
+
+/* PRIVLIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ *	This symbol contains the ~name expanded version of PRIVLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "$privlib"		/**/
+#define PRIVLIB_EXP "$privlibexp"		/**/
+
+/* PTRSIZE:
+ *	This symbol contains the size of a pointer, so that the C preprocessor
+ *	can make decisions based on it.  It will be sizeof(void *) if
+ *	the compiler supports (void *); otherwise it will be
+ *	sizeof(char *).
+ */
+#define PTRSIZE $ptrsize		/**/
+
+/* Drand01:
+ *	This macro is to be used to generate uniformly distributed
+ *	random numbers over the range [0., 1.[.  You may have to supply
+ *	an 'extern double drand48();' in your program since SunOS 4.1.3
+ *	doesn't provide you with anything relevant in it's headers.
+ *	See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ *	This symbol defines the type of the argument of the
+ *	random seed function.
+ */
+/* seedDrand01:
+ *	This symbol defines the macro to be used in seeding the
+ *	random number generator (see Drand01).
+ */
+/* RANDBITS:
+ *	This symbol indicates how many bits are produced by the
+ *	function used to generate normalized random numbers.
+ *	Values include 15, 16, 31, and 48.
+ */
+#define Drand01()		$drand01		/**/
+#define Rand_seed_t		$randseedtype		/**/
+#define seedDrand01(x)	$seedfunc((Rand_seed_t)x)	/**/
+#define RANDBITS		$randbits		/**/
+
 /* SELECT_MIN_BITS:
  *	This symbol holds the minimum number of bits operated by select.
  *	That is, if you do select(n, ...), how many bits at least will be
@@ -2521,6 +2597,99 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define SELECT_MIN_BITS 	$selectminbits	/**/
 
+/* Select_fd_set_t:
+ *	This symbol holds the type used for the 2nd, 3rd, and 4th
+ *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
+ *	is defined, and 'int *' otherwise.  This is only useful if you 
+ *	have select(), of course.
+ */
+#define Select_fd_set_t 	$selecttype	/**/
+
+/* SIG_NAME:
+ *	This symbol contains a list of signal names in order of
+ *	signal number. This is intended
+ *	to be used as a static array initialization, like this:
+ *		char *sig_name[] = { SIG_NAME };
+ *	The signals in the list are separated with commas, and each signal
+ *	is surrounded by double quotes. There is no leading SIG in the signal
+ *	name, i.e. SIGQUIT is known as "QUIT".
+ *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ *	etc., where nn is the actual signal number (e.g. NUM37).
+ *	The signal number for sig_name[i] is stored in sig_num[i].
+ *	The last element is 0 to terminate the list with a NULL.  This
+ *	corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ *	This symbol contains a list of signal numbers, in the same order as the
+ *	SIG_NAME list. It is suitable for static array initialization, as in:
+ *		int sig_num[] = { SIG_NUM };
+ *	The signals in the list are separated with commas, and the indices
+ *	within that list and the SIG_NAME list match, so it's easy to compute
+ *	the signal name from a number or vice versa at the price of a small
+ *	dynamic linear lookup. 
+ *	Duplicates are allowed, but are moved to the end of the list.
+ *	The signal number corresponding to sig_name[i] is sig_number[i].
+ *	if (i < NSIG) then sig_number[i] == i.  
+ *	The last element is 0, corresponding to the 0 at the end of
+ *	the sig_name list.
+ */
+#define SIG_NAME $sig_name_init		/**/
+#define SIG_NUM  $sig_num_init		/**/
+
+/* SITEARCH:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-dependent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ *	This symbol contains the ~name expanded version of SITEARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "$sitearch"		/**/
+#define SITEARCH_EXP "$sitearchexp"		/**/
+
+/* SITELIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-independent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ *	This symbol contains the ~name expanded version of SITELIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB "$sitelib"		/**/
+#define SITELIB_EXP "$sitelibexp"		/**/
+
+/* Size_t:
+ *	This symbol holds the type used to declare length parameters
+ *	for string functions.  It is usually size_t, but may be
+ *	unsigned long, int, etc.  It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t $sizetype	 /* length paramater for string functions */
+
+/* SSize_t:
+ *	This symbol holds the type used by functions that return
+ *	a count of bytes or an error condition.  It must be a signed type.
+ *	It is usually ssize_t, but may be long or int, etc.
+ *	It may be necessary to include <sys/types.h> or <unistd.h>
+ *	to get any typedef'ed information.
+ *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t $ssizetype	 /* signed count of bytes */
+
 /* STARTPERL:
  *	This variable contains the string to put in front of a perl
  *	script to make sure (one hopes) that it runs with perl and not
@@ -2539,11 +2708,22 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$d_stdio_stream_array	HAS_STDIO_STREAM_ARRAY	/**/
 #define STDIO_STREAM_ARRAY	$stdio_stream_array
 
-/* HAS_STRTOULL:
- *	This symbol, if defined, indicates that the strtoull routine is
- *	available to convert strings into unsigned long longs.
+/* Uid_t_f:
+ *	This symbol defines the format string used for printing a Uid_t.
  */
-#$d_strtoull HAS_STRTOULL		/**/
+#define	Uid_t_f		$uidformat		/**/
+
+/* Uid_t_size:
+ *	This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size $uidsize		/* UID size */
+
+/* Uid_t:
+ *	This symbol holds the type used to declare user ids in the kernel.
+ *	It can be int, ushort, uid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t $uidtype		/* UID type */
 
 /* USE_64_BITS:
  *	This symbol, if defined, indicates that 64-bit integers should
@@ -2608,124 +2788,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #$usesocks	USE_SOCKS		/**/
 #endif
 
-/* HAS_DRAND48_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the drand48() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern double drand48 _((void));
- */
-#$d_drand48proto	HAS_DRAND48_PROTO	/**/
-
-/* HAS_GETHOST_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for gethostent(), gethostbyname(), and
- *	gethostbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_gethostprotos	HAS_GETHOST_PROTOS	/**/
-
-/* HAS_GETNET_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getnetent(), getnetbyname(), and
- *	getnetbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getnetprotos	HAS_GETNET_PROTOS	/**/
-
-/* HAS_GETPROTO_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getprotoent(), getprotobyname(), and
- *	getprotobyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getprotoprotos	HAS_GETPROTO_PROTOS	/**/
-
-/* HAS_GETSERV_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getservent(), getservbyname(), and
- *	getservbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getservprotos	HAS_GETSERV_PROTOS	/**/
-
-/* Netdb_host_t:
- *	This symbol holds the type used for the 1st argument
- *	to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- *	This symbol holds the type used for the 2nd argument
- *	to gethostbyaddr().
- */
-/* Netdb_name_t:
- *	This symbol holds the type used for the argument to
- *	gethostbyname().
- */
-/* Netdb_net_t:
- *	This symbol holds the type used for the 1st argument to
- *	getnetbyaddr().
- */
-#define Netdb_host_t		$netdb_host_type /**/
-#define Netdb_hlen_t		$netdb_hlen_type /**/
-#define Netdb_name_t		$netdb_name_type /**/
-#define Netdb_net_t		$netdb_net_type /**/
-
-/* Select_fd_set_t:
- *	This symbol holds the type used for the 2nd, 3rd, and 4th
- *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
- *	is defined, and 'int *' otherwise.  This is only useful if you 
- *	have select(), of course.
- */
-#define Select_fd_set_t 	$selecttype	/**/
-
-/* ARCHNAME:
- *	This symbol holds a string representing the architecture name.
- *	It may be used to construct an architecture-dependant pathname
- *	where library files may be held under a private library, for
- *	instance.
- */
-#define ARCHNAME "$archname"		/**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- *	This symbol, if defined, indicates how to create pthread
- *	in joinable (aka undetached) state.  NOTE: not defined
- *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- *	(the new version of the constant).
- *	If defined, known values are PTHREAD_CREATE_UNDETACHED
- *	and __UNDETACHED.
- */
-#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
-
-/* HAS_PTHREAD_YIELD:
- *	This symbol, if defined, indicates that the pthread_yield 
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- *	This symbol defines the way to yield the execution of
- *	the current thread.  Known ways are sched_yield,
- *	pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- *	This symbol, if defined, indicates that the sched_yield
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-#$d_pthread_yield HAS_PTHREAD_YIELD	/**/
-#define SCHED_YIELD	$sched_yield	/**/
-#$d_sched_yield HAS_SCHED_YIELD	/**/
-
-/* I_MACH_CTHREADS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <mach/cthreads.h>.
- */
-#$i_machcthr   I_MACH_CTHREADS	/**/
-
-/* I_PTHREAD:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <pthread.h>.
- */
-#$i_pthread   I_PTHREAD	/**/
-
 /* USE_ITHREADS:
  *	This symbol, if defined, indicates that Perl should be built to
  *	use the interpreter-based threading implementation.
@@ -2745,100 +2807,36 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #endif
 #$d_oldpthreads	OLD_PTHREADS_API		/**/
 
-/* Time_t:
- *	This symbol holds the type returned by time(). It can be long,
- *	or time_t on BSD sites (in which case <sys/types.h> should be
- *	included).
- */
-#define Time_t $timetype		/* Time type */
-
-/* HAS_TIMES:
- *	This symbol, if defined, indicates that the times() routine exists.
- *	Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#$d_times HAS_TIMES		/**/
-
-/* Fpos_t:
- *	This symbol holds the type used to declare file positions in libc.
- *	It can be fpos_t, long, uint, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t $fpostype		/* File position type */
-
-/* Gid_t_f:
- *	This symbol defines the format string used for printing a Gid_t.
- */
-#define	Gid_t_f		$gidformat		/**/
-
-/* Gid_t_size:
- *	This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size $gidsize		/* GID size */
-
-/* Gid_t:
- *	This symbol holds the return type of getgid() and the type of
- *	argument to setrgid() and related functions.  Typically,
- *	it is the type of group ids in the kernel. It can be int, ushort,
- *	uid_t, etc... It may be necessary to include <sys/types.h> to get
- *	any typedef'ed information.
- */
-#define Gid_t $gidtype		/* Type for getgid(), etc... */
-
-/* Off_t:
- *	This symbol holds the type used to declare offsets in the kernel.
- *	It can be int, long, off_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t $lseektype		/* <offset> type */
-#define LSEEKSIZE $lseeksize		/* <offset> size */
-#define Off_t_size $lseeksize	/* <offset> size */
-
-/* Mode_t:
- *	This symbol holds the type used to declare file modes 
- *	for systems calls.  It is usually mode_t, but may be
- *	int or unsigned short.  It may be necessary to include <sys/types.h>
- *	to get any typedef'ed information.
- */
-#define Mode_t $modetype	 /* file mode parameter for system calls */
-
-/* Pid_t:
- *	This symbol holds the type used to declare process ids in the kernel.
- *	It can be int, uint, pid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t $pidtype		/* PID type */
-
-/* Size_t:
- *	This symbol holds the type used to declare length parameters
- *	for string functions.  It is usually size_t, but may be
- *	unsigned long, int, etc.  It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Size_t $sizetype	 /* length paramater for string functions */
-
-/* Uid_t_f:
- *	This symbol defines the format string used for printing a Uid_t.
- */
-#define	Uid_t_f		$uidformat		/**/
-
-/* Uid_t_size:
- *	This symbol holds the size of a Uid_t in bytes.
+/* PERL_VENDORLIB_EXP:
+ *	This symbol contains the ~name expanded version of VENDORLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define Uid_t_size $uidsize		/* UID size */
+#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp"		/**/
 
-/* Uid_t:
- *	This symbol holds the type used to declare user ids in the kernel.
- *	It can be int, ushort, uid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
+/* VOIDFLAGS:
+ *	This symbol indicates how much support of the void type is given by this
+ *	compiler.  What various bits mean:
+ *
+ *	    1 = supports declaration of void
+ *	    2 = supports arrays of pointers to functions returning void
+ *	    4 = supports comparisons between pointers to void functions and
+ *		    addresses of void functions
+ *	    8 = suports declaration of generic void pointers
+ *
+ *	The package designer should define VOIDUSED to indicate the requirements
+ *	of the package.  This can be done either by #defining VOIDUSED before
+ *	including config.h, or by defining defvoidused in Myinit.U.  If the
+ *	latter approach is taken, only those flags will be tested.  If the
+ *	level of void support necessary is not present, defines void to int.
  */
-#define Uid_t $uidtype		/* UID type */
+#ifndef VOIDUSED
+#define VOIDUSED $defvoidused
+#endif
+#define VOIDFLAGS $voidflags
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int		/* is void to be avoided? */
+#define M_VOID			/* Xenix strikes again */
+#endif
 
 #endif
 !GROK!THIS!