Remove cpan/CPANPLUS and associated utilities

5 files changed, 6 insertions, 171 deletions

diff --git a/utils/Makefile b/utils/Makefile
index bf6bc804a2..f8934e8623 100644
--- a/utils/Makefile
+++ b/utils/Makefile
@@ -10,9 +10,9 @@ RUN =   # Used mainly cross-compilation setups.
 # Files to be built with variable substitution after miniperl is
 # available.  Dependencies handled manually below (for now).
 
-pl = c2ph.PL config_data.PL corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL json_pp.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL ptar.PL ptardiff.PL ptargrep.PL cpanp-run-perl.PL cpanp.PL cpan2dist.PL shasum.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL xsubpp.PL pod2html.PL zipdetails.PL
-plextract = c2ph config_data corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum splain libnetcfg piconv enc2xs xsubpp pod2html zipdetails
-plextractexe = ./c2ph ./config_data ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./cpanp-run-perl ./cpanp ./cpan2dist ./shasum ./splain ./libnetcfg ./piconv ./enc2xs ./xsubpp ./pod2html ./zipdetails
+pl = c2ph.PL config_data.PL corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL json_pp.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL ptar.PL ptardiff.PL ptargrep.PL shasum.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL xsubpp.PL pod2html.PL zipdetails.PL
+plextract = c2ph config_data corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep shasum splain libnetcfg piconv enc2xs xsubpp pod2html zipdetails
+plextractexe = ./c2ph ./config_data ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./shasum ./splain ./libnetcfg ./piconv ./enc2xs ./xsubpp ./pod2html ./zipdetails
 
 all: $(plextract) 
 
@@ -49,12 +49,6 @@ ptardiff:	ptardiff.PL ../config.sh
 
 ptargrep:	ptargrep.PL ../config.sh
 
-cpanp-run-perl:	cpanp-run-perl.PL ../config.sh
-
-cpanp:	cpanp.PL ../config.sh
-
-cpan2dist:	cpan2dist.PL ../config.sh
-
 pl2pm:		pl2pm.PL ../config.sh
 
 shasum:		shasum.PL ../config.sh
diff --git a/utils/Makefile.SH b/utils/Makefile.SH
index ca683c2e14..a4a7e4a9d2 100644
--- a/utils/Makefile.SH
+++ b/utils/Makefile.SH
@@ -48,9 +48,9 @@ cat >>Makefile <<'!NO!SUBS!'
 # Files to be built with variable substitution after miniperl is
 # available.  Dependencies handled manually below (for now).
 
-pl = c2ph.PL config_data.PL corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL json_pp.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL ptar.PL ptardiff.PL ptargrep.PL cpanp-run-perl.PL cpanp.PL cpan2dist.PL shasum.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL xsubpp.PL pod2html.PL zipdetails.PL
-plextract = c2ph config_data corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum splain libnetcfg piconv enc2xs xsubpp pod2html zipdetails
-plextractexe = ./c2ph ./config_data ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./cpanp-run-perl ./cpanp ./cpan2dist ./shasum ./splain ./libnetcfg ./piconv ./enc2xs ./xsubpp ./pod2html ./zipdetails
+pl = c2ph.PL config_data.PL corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL json_pp.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL ptar.PL ptardiff.PL ptargrep.PL shasum.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL xsubpp.PL pod2html.PL zipdetails.PL
+plextract = c2ph config_data corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep shasum splain libnetcfg piconv enc2xs xsubpp pod2html zipdetails
+plextractexe = ./c2ph ./config_data ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./shasum ./splain ./libnetcfg ./piconv ./enc2xs ./xsubpp ./pod2html ./zipdetails
 
 all: $(plextract) 
 
@@ -87,12 +87,6 @@ ptardiff:	ptardiff.PL ../config.sh
 
 ptargrep:	ptargrep.PL ../config.sh
 
-cpanp-run-perl:	cpanp-run-perl.PL ../config.sh
-
-cpanp:	cpanp.PL ../config.sh
-
-cpan2dist:	cpan2dist.PL ../config.sh
-
 pl2pm:		pl2pm.PL ../config.sh
 
 shasum:		shasum.PL ../config.sh
diff --git a/utils/cpan2dist.PL b/utils/cpan2dist.PL
deleted file mode 100644
index 0533a01e40..0000000000
--- a/utils/cpan2dist.PL
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/usr/local/bin/perl
-
-use Config;
-use File::Basename qw(&basename &dirname);
-use Cwd;
-
-# List explicitly here the variables you want Configure to
-# generate.  Metaconfig only looks for shell variables, so you
-# have to mention them as if they were shell variables, not
-# %Config entries.  Thus you write
-#  $startperl
-# to ensure Configure will look for $Config{startperl}.
-
-# This forces PL files to create target in same directory as PL file.
-# This is so that make depend always knows where to find PL derivatives.
-my $origdir = cwd;
-chdir dirname($0);
-my $file = basename($0, '.PL');
-$file .= '.com' if $^O eq 'VMS';
-
-open OUT,">$file" or die "Can't create $file: $!";
-
-print "Extracting $file (with variable substitutions)\n";
-
-# In this section, perl variables will be expanded during extraction.
-# You can use $Config{...} to use Configure variables.
-
-print OUT <<"!GROK!THIS!";
-$Config{startperl}
-    eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}'
-	if \$running_under_some_shell;
-!GROK!THIS!
-
-use File::Spec;
-
-my $script = File::Spec->catfile(
-            File::Spec->catdir(
-                File::Spec->updir, qw[ cpan CPANPLUS bin ]
-            ), "cpan2dist");
-
-if (open(IN, $script)) {
-    print OUT <IN>;
-    close IN;
-} else {
-    die "$0: cannot find '$script'\n";
-}
-
-close OUT or die "Can't close $file: $!";
-chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
-exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';
-chdir $origdir;
diff --git a/utils/cpanp-run-perl.PL b/utils/cpanp-run-perl.PL
deleted file mode 100644
index a72ac2b668..0000000000
--- a/utils/cpanp-run-perl.PL
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/usr/local/bin/perl
-
-use Config;
-use File::Basename qw(&basename &dirname);
-use Cwd;
-
-# List explicitly here the variables you want Configure to
-# generate.  Metaconfig only looks for shell variables, so you
-# have to mention them as if they were shell variables, not
-# %Config entries.  Thus you write
-#  $startperl
-# to ensure Configure will look for $Config{startperl}.
-
-# This forces PL files to create target in same directory as PL file.
-# This is so that make depend always knows where to find PL derivatives.
-my $origdir = cwd;
-chdir dirname($0);
-my $file = basename($0, '.PL');
-$file .= '.com' if $^O eq 'VMS';
-
-open OUT,">$file" or die "Can't create $file: $!";
-
-print "Extracting $file (with variable substitutions)\n";
-
-# In this section, perl variables will be expanded during extraction.
-# You can use $Config{...} to use Configure variables.
-
-print OUT <<"!GROK!THIS!";
-$Config{startperl}
-    eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}'
-	if \$running_under_some_shell;
-!GROK!THIS!
-
-use File::Spec;
-
-my $script = File::Spec->catfile(
-            File::Spec->catdir(
-                File::Spec->updir, qw[ cpan CPANPLUS bin ]
-            ), "cpanp-run-perl");
-
-if (open(IN, $script)) {
-    print OUT <IN>;
-    close IN;
-} else {
-    die "$0: cannot find '$script'\n";
-}
-
-close OUT or die "Can't close $file: $!";
-chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
-exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';
-chdir $origdir;
diff --git a/utils/cpanp.PL b/utils/cpanp.PL
deleted file mode 100644
index ea3b4399d3..0000000000
--- a/utils/cpanp.PL
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/usr/local/bin/perl
-
-use Config;
-use File::Basename qw(&basename &dirname);
-use Cwd;
-
-# List explicitly here the variables you want Configure to
-# generate.  Metaconfig only looks for shell variables, so you
-# have to mention them as if they were shell variables, not
-# %Config entries.  Thus you write
-#  $startperl
-# to ensure Configure will look for $Config{startperl}.
-
-# This forces PL files to create target in same directory as PL file.
-# This is so that make depend always knows where to find PL derivatives.
-my $origdir = cwd;
-chdir dirname($0);
-my $file = basename($0, '.PL');
-$file .= '.com' if $^O eq 'VMS';
-
-open OUT,">$file" or die "Can't create $file: $!";
-
-print "Extracting $file (with variable substitutions)\n";
-
-# In this section, perl variables will be expanded during extraction.
-# You can use $Config{...} to use Configure variables.
-
-print OUT <<"!GROK!THIS!";
-$Config{startperl}
-    eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}'
-	if \$running_under_some_shell;
-!GROK!THIS!
-
-use File::Spec;
-
-my $script = File::Spec->catfile(
-            File::Spec->catdir(
-                File::Spec->updir, qw[ cpan CPANPLUS bin ]
-            ), "cpanp");
-
-if (open(IN, $script)) {
-    print OUT <IN>;
-    close IN;
-} else {
-    die "$0: cannot find '$script'\n";
-}
-
-close OUT or die "Can't close $file: $!";
-chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
-exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';
-chdir $origdir;