kmx's original GNUmakefile

1 files changed, 1379 insertions, 0 deletions

diff --git a/win32/GNUmakefile b/win32/GNUmakefile
new file mode 100644
index 0000000000..928672cfc5
--- /dev/null
+++ b/win32/GNUmakefile
@@ -0,0 +1,1379 @@
+#
+# Makefile to build perl on Windows using GNU make + gcc + MinGW.
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl521.dll).  Also makes individual DLLs for the XS extensions.
+#
+# The easiest way to customize the build process is to use parameters like this:
+#
+# c:\dev\perlsrc\win32> gmake INST_TOP=c:\sw\perl CCHOME=c:\sw\mingw USE_64_BIT_INT=define
+
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+#
+# We set this to point to cmd.exe in case GNU Make finds sh.exe in the path.
+# Comment this line out if necessary
+#
+SHELL := cmd.exe
+
+# define whether you want to use native gcc compiler or cross-compiler
+# possible values: gcc
+#                  i686-w64-mingw32-gcc
+#                  x86_64-w64-mingw32-gcc
+GCCBIN := gcc
+
+ifeq ($(GCCBIN),x86_64-w64-mingw32-gcc)
+GCCCROSS := x86_64-w64-mingw32
+endif
+ifeq ($(GCCBIN),i686-w64-mingw32-gcc)
+GCCCROSS := i686-w64-mingw32
+endif
+
+GCCTARGET := $(shell $(GCCBIN) -dumpmachine)
+GCCVER1   := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%i)
+GCCVER2   := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%j)
+GCCVER3   := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%k)
+
+ifeq ($(GCCTARGET),x86_64-w64-mingw32)
+WIN64 := define
+ARCHITECTURE := x64
+endif
+ifeq ($(GCCTARGET),i686-w64-mingw32)
+WIN64 := undef
+ARCHITECTURE := x86
+endif
+
+##
+## Build configuration.  Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "gmake install" to put your
+# newly built perl.
+#
+INST_DRV := c:
+INST_TOP := $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location.  Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to.  If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+#INST_VER	:= \5.21.7
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components.  This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files.  Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location.  Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+#INST_ARCH	:= \$(ARCHNAME)
+
+#
+# Uncomment this if you want perl to run
+# 	$Config{sitelibexp}\sitecustomize.pl
+# before anything else.  This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST	:= define
+
+#
+# uncomment to enable multiple interpreters.  This is needed for fork()
+# emulation and for thread support, and is auto-enabled by USE_IMP_SYS
+# and USE_ITHREADS below.
+#
+USE_MULTI	:= define
+
+#
+# Interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation.  This needs (and
+# will auto-enable) USE_MULTI above.
+#
+USE_ITHREADS	:= define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl.  This is also needed to get fork().  This needs (and
+# will auto-enable) USE_MULTI above.
+#
+USE_IMP_SYS	:= define
+
+#
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
+#
+USE_PERLIO	:= define
+
+#
+# Comment this out if you don't want to enable large file support for
+# some reason.  Should normally only be changed to maintain compatibility
+# with an older release of perl.
+#
+USE_LARGE_FILES	:= define
+
+#
+# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
+# (If you're building a 64-bit perl then you will have 64-bit integers whether
+# or not this is uncommented.)
+# Note: This option is not supported in 32-bit MSVC60 builds.
+#
+#USE_64_BIT_INT	:= define
+
+#
+# Uncomment this if you want to support the use of long doubles.
+#
+#USE_LONG_DOUBLE :=define
+
+#
+# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
+#CFG		:= Debug
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful.  This option is supported only with
+# Visual C.
+#
+#USE_SETARGV	:= define
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it.  Be prepared to recompile all
+# extensions if you change the default.  Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC	:= define
+
+#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function.  This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS	:= define
+
+#
+# set this to additionally provide a statically linked perl-static.exe.
+# Note that dynamic loading will not work with this perl, so you must
+# include required modules statically using the STATIC_EXT or ALL_STATIC
+# variables below. A static library perl521s.lib will also be created.
+# Ordinary perl.exe is not affected by this option.
+#
+#BUILD_STATIC	:= define
+
+#
+# in addition to BUILD_STATIC the option ALL_STATIC makes *every*
+# extension get statically built
+# This will result in a very large perl executable, but the main purpose
+# is to have proper linking set so as to be able to create miscellaneous
+# executables with different built-in extensions
+#
+#ALL_STATIC	:= define
+
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+CCHOME		:= C:\MinGW
+
+#
+# Following sets $Config{incpath} and $Config{libpth}
+#
+
+ifneq ($(GCCCROSS),)
+CCINCDIR := $(CCHOME)\$(GCCCROSS)\include
+CCLIBDIR := $(CCHOME)\$(GCCCROSS)\lib
+CCDLLDIR := $(CCLIBDIR)
+ARCHPREFIX := $(GCCCROSS)-
+else
+CCINCDIR := $(CCHOME)\include
+CCLIBDIR := $(CCHOME)\lib
+CCDLLDIR := $(CCHOME)\bin
+ARCHPREFIX :=
+endif
+
+#
+# Additional compiler flags can be specified here.
+#
+BUILDOPT	:= $(BUILDOPTEXTRA)
+
+#
+# This should normally be disabled.  Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT	+= -DPERL_EXTERNAL_GLOB
+
+#
+# Perl needs to read scripts in text mode so that the DATA filehandle
+# works correctly with seek() and tell(), or around auto-flushes of
+# all filehandles (e.g. by system(), backticks, fork(), etc).
+#
+# The current version on the ByteLoader module on CPAN however only
+# works if scripts are read in binary mode.  But before you disable text
+# mode script reading (and break some DATA filehandle functionality)
+# please check first if an updated ByteLoader isn't available on CPAN.
+#
+BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS	:=
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL		:=
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+PERL_MALLOC	?= undef
+DEBUG_MSTATS	?= undef
+
+USE_SITECUST	?= undef
+USE_MULTI	?= undef
+USE_ITHREADS	?= undef
+USE_IMP_SYS	?= undef
+USE_PERLIO	?= undef
+USE_LARGE_FILES	?= undef
+USE_64_BIT_INT	?= undef
+USE_LONG_DOUBLE	?= undef
+
+ifeq ($(USE_IMP_SYS),define)
+PERL_MALLOC	= undef
+endif
+
+ifeq ($(PERL_MALLOC),undef)
+DEBUG_MSTATS	= undef
+endif
+
+ifeq ($(DEBUG_MSTATS),define)
+BUILDOPT	+= -DPERL_DEBUGGING_MSTATS
+endif
+
+ifeq ("$(USE_IMP_SYS) $(USE_MULTI)","define undef")
+USE_MULTI	= define
+endif
+
+ifeq ("$(USE_ITHREADS) $(USE_MULTI)","define undef")
+USE_MULTI	= define
+endif
+
+ifeq ($(USE_SITECUST),define)
+BUILDOPT	+= -DUSE_SITECUSTOMIZE
+endif
+
+ifneq ($(USE_MULTI),undef)
+BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT
+endif
+
+ifneq ($(USE_IMP_SYS),undef)
+BUILDOPT	+= -DPERL_IMPLICIT_SYS
+endif
+
+ifeq ($(WIN64),define)
+USE_64_BIT_INT	= define
+endif
+
+ifeq ($(USE_MULTI),define)
+ARCHNAME	= MSWin32-$(ARCHITECTURE)-multi
+else
+ifeq ($(USE_PERLIO),define)
+ARCHNAME	= MSWin32-$(ARCHITECTURE)-perlio
+else
+ARCHNAME	= MSWin32-$(ARCHITECTURE)
+endif
+endif
+
+ifeq ($(USE_PERLIO),define)
+BUILDOPT	+= -DUSE_PERLIO
+endif
+
+ifeq ($(USE_ITHREADS),define)
+ARCHNAME	:= $(ARCHNAME)-thread
+endif
+
+ifneq ($(WIN64),define)
+ifeq ($(USE_64_BIT_INT),define)
+ARCHNAME	:= $(ARCHNAME)-64int
+endif
+endif
+
+ifeq ($(USE_LONG_DOUBLE),define)
+ARCHNAME	:= $(ARCHNAME)-ld
+endif
+
+ARCHDIR		= ..\lib\$(ARCHNAME)
+COREDIR		= ..\lib\CORE
+AUTODIR		= ..\lib\auto
+LIBDIR		= ..\lib
+EXTDIR		= ..\ext
+DISTDIR		= ..\dist
+CPANDIR		= ..\cpan
+PODDIR		= ..\pod
+HTMLDIR		= .\html
+
+#
+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB	= $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
+INST_COREDIR	= $(INST_ARCHLIB)\CORE
+INST_HTML	= $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+MINIBUILDOPT    :=
+
+CC		= $(ARCHPREFIX)gcc
+LINK32		= $(ARCHPREFIX)g++
+LIB32		= $(ARCHPREFIX)ar rc
+IMPLIB		= $(ARCHPREFIX)dlltool
+RSC		= $(ARCHPREFIX)windres
+
+ifeq ($(USE_LONG_DOUBLE),define)
+BUILDOPT        += -D__USE_MINGW_ANSI_STDIO
+MINIBUILDOPT    += -D__USE_MINGW_ANSI_STDIO
+endif
+
+# If you are using GCC, 4.3 or later by default we add the -fwrapv option.
+# See https://rt.perl.org/Ticket/Display.html?id=121505
+#
+GCCWRAPV := $(shell if "$(GCCVER1)"=="4" (if "$(GCCVER2)" geq "3" echo define) else if "$(GCCVER1)" geq "5" (echo define))
+
+ifeq ($(GCCWRAPV),define)
+BUILDOPT        += -fwrapv
+MINIBUILDOPT    += -fwrapv
+endif
+
+i = .i
+o = .o
+a = .a
+
+#
+# Options
+#
+
+INCLUDES	= -I.\include -I. -I.. -I$(COREDIR)
+DEFINES		= -DWIN32
+ifeq ($(WIN64),define)
+DEFINES		+= -DWIN64 -DCONSERVATIVE
+endif
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -xc++
+LIBC		=
+LIBFILES	= $(LIBC) \
+		  -lmoldname -lkernel32 -luser32 -lgdi32 \
+		  -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
+		  -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
+		  -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
+
+ifeq ($(CFG),Debug)
+OPTIMIZE	= -g -O2 -DDEBUGGING
+LINK_DBG	= -g
+else
+OPTIMIZE	= -s -O2
+LINK_DBG	= -s
+endif
+
+EXTRACFLAGS	=
+CFLAGS		= $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
+LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+OBJOUT_FLAG	= -o
+EXEOUT_FLAG	= -o
+LIBOUT_FLAG	=
+
+BUILDOPT	+= -fno-strict-aliasing -mms-bitfields
+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
+
+# used to allow local linking flags that are not propogated into Config.pm,
+# currently unused
+#   -- BKS, 12-12-1999
+PRIV_LINK_FLAGS	=
+BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+%$(o): %.c
+	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+%.i: %.c
+	$(CC) -c -I$(<D) $(CFLAGS_O) -E $< >$@
+
+%.c: %.y
+	$(NOOP)
+
+%.dll: %$(o)
+	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
+	$(IMPLIB) --input-def $(*F).def --output-lib $(*F).a $@
+
+%.res: %.rc
+	$(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
+
+#
+# various targets
+MINIPERL	= ..\miniperl.exe
+MINIDIR		= mini
+PERLEXE		= ..\perl.exe
+WPERLEXE	= ..\wperl.exe
+PERLEXESTATIC	= ..\perl-static.exe
+STATICDIR	= .\static.tmp
+GLOBEXE		= ..\perlglob.exe
+CONFIGPM	= ..\lib\Config.pm ..\lib\Config_heavy.pl
+GENUUDMAP	= ..\generate_uudmap.exe
+ifeq ($(BUILD_STATIC),define)
+PERLSTATIC	= static
+else
+ifeq ($(ALL_STATIC),define)
+PERLSTATIC	= static
+else
+PERLSTATIC	=
+endif
+endif
+
+# Unicode data files generated by mktables
+UNIDATAFILES	 = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
+		   ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+		   ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm            \
+		   ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
+
+# Directories of Unicode data files generated by mktables
+UNIDATADIR1	= ..\lib\unicore\To
+UNIDATADIR2	= ..\lib\unicore\lib
+
+PERLEXE_MANIFEST= .\perlexe.manifest
+PERLEXE_ICO	= .\perlexe.ico
+PERLEXE_RES	= .\perlexe.res
+PERLDLL_RES	=
+
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP = perldll.def
+
+
+PL2BAT		= bin\pl2bat.pl
+
+UTILS		=			\
+		..\utils\h2ph		\
+		..\utils\splain		\
+		..\utils\perlbug	\
+		..\utils\pl2pm 		\
+		..\utils\c2ph		\
+		..\utils\pstruct	\
+		..\utils\h2xs		\
+		..\utils\perldoc	\
+		..\utils\perlivp	\
+		..\utils\libnetcfg	\
+		..\utils\enc2xs		\
+		..\utils\piconv		\
+		..\utils\corelist	\
+		..\utils\cpan		\
+		..\utils\xsubpp		\
+		..\utils\pod2html	\
+		..\utils\prove		\
+		..\utils\ptar		\
+		..\utils\ptardiff	\
+		..\utils\ptargrep	\
+		..\utils\zipdetails	\
+		..\utils\shasum		\
+		..\utils\instmodsh	\
+		..\utils\json_pp	\
+		bin\exetype.pl		\
+		bin\runperl.pl		\
+		bin\pl2bat.pl		\
+		bin\perlglob.pl		\
+		bin\search.pl
+
+CFGSH_TMPL	= config.gc
+CFGH_TMPL	= config_H.gc
+PERLIMPLIB	= ..\libperl521$(a)
+PERLSTATICLIB	= ..\libperl521s$(a)
+INT64		= long long
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+PERLDLL		= ..\perl521.dll
+
+XCOPY		= xcopy /f /r /i /d /y
+RCOPY		= xcopy /f /r /i /e /d /y
+NOOP		= @rem
+
+MICROCORE_SRC	=		\
+		..\av.c		\
+		..\caretx.c	\
+		..\deb.c	\
+		..\doio.c	\
+		..\doop.c	\
+		..\dump.c	\
+		..\globals.c	\
+		..\gv.c		\
+		..\mro.c	\
+		..\hv.c		\
+		..\locale.c	\
+		..\keywords.c	\
+		..\mathoms.c    \
+		..\mg.c		\
+		..\numeric.c	\
+		..\op.c		\
+		..\pad.c	\
+		..\perl.c	\
+		..\perlapi.c	\
+		..\perly.c	\
+		..\pp.c		\
+		..\pp_ctl.c	\
+		..\pp_hot.c	\
+		..\pp_pack.c	\
+		..\pp_sort.c	\
+		..\pp_sys.c	\
+		..\reentr.c	\
+		..\regcomp.c	\
+		..\regexec.c	\
+		..\run.c	\
+		..\scope.c	\
+		..\sv.c		\
+		..\taint.c	\
+		..\toke.c	\
+		..\universal.c	\
+		..\utf8.c	\
+		..\util.c
+
+EXTRACORE_SRC	+= perllib.c
+
+ifeq ($(PERL_MALLOC),define)
+EXTRACORE_SRC	+= ..\malloc.c
+endif
+
+EXTRACORE_SRC	+= ..\perlio.c
+
+WIN32_SRC	=		\
+		.\win32.c	\
+		.\win32sck.c	\
+		.\win32thread.c	\
+		.\fcrypt.c
+
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#ifeq ($(USE_PERLIO)" == "define"
+WIN32_SRC	+= .\win32io.c
+#endif
+
+CORE_NOCFG_H	=		\
+		..\av.h		\
+		..\cop.h	\
+		..\cv.h		\
+		..\dosish.h	\
+		..\embed.h	\
+		..\form.h	\
+		..\gv.h		\
+		..\handy.h	\
+		..\hv.h		\
+		..\hv_func.h	\
+		..\iperlsys.h	\
+		..\mg.h		\
+		..\nostdio.h	\
+		..\op.h		\
+		..\opcode.h	\
+		..\perl.h	\
+		..\perlapi.h	\
+		..\perlsdio.h	\
+		..\perly.h	\
+		..\pp.h		\
+		..\proto.h	\
+		..\regcomp.h	\
+		..\regexp.h	\
+		..\scope.h	\
+		..\sv.h		\
+		..\thread.h	\
+		..\unixish.h	\
+		..\utf8.h	\
+		..\util.h	\
+		..\warnings.h	\
+		..\XSUB.h	\
+		..\EXTERN.h	\
+		..\perlvars.h	\
+		..\intrpvar.h	\
+		.\include\dirent.h	\
+		.\include\netdb.h	\
+		.\include\sys\errno2.h	\
+		.\include\sys\socket.h	\
+		.\win32.h
+
+CORE_H		= $(CORE_NOCFG_H) .\config.h ..\git_version.h
+
+UUDMAP_H	= ..\uudmap.h
+BITCOUNT_H	= ..\bitcount.h
+MG_DATA_H	= ..\mg_data.h
+GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
+
+MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.o)
+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.o)
+WIN32_OBJ	= $(WIN32_SRC:.c=.o)
+
+MINICORE_OBJ	= $(subst ..\,mini\,$(MICROCORE_OBJ))	\
+		  $(MINIDIR)\miniperlmain$(o)	\
+		  $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ	= $(subst .\,mini\,$(WIN32_OBJ))
+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ		= $(DYNALOADER)
+GENUUDMAP_OBJ	= $(GENUUDMAP:.exe=.o)
+
+PERLDLL_OBJ	= $(CORE_OBJ)
+PERLEXE_OBJ	= perlmain$(o)
+PERLEXEST_OBJ	= perlmainst$(o)
+
+PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)
+
+ifneq ($(USE_SETARGV),)
+SETARGV_OBJ	= setargv$(o)
+endif
+
+ifeq ($(ALL_STATIC),define)
+# some exclusions, unfortunately, until fixed:
+#  - MakeMaker isn't capable enough for SDBM_File (small bug)
+STATIC_EXT	= * !SDBM_File
+else
+# specify static extensions here, for example:
+# (be sure to include Win32CORE to load Win32 on demand)
+#STATIC_EXT	= Win32CORE Cwd Compress/Raw/Zlib
+STATIC_EXT	= Win32CORE
+endif
+
+DYNALOADER	= ..\DynaLoader$(o)
+
+# vars must be separated by "\t+~\t+", since we're using the tempfile
+# version of config_sh.pl (we were overflowing someone's buffer by
+# trying to fit them all on the command line)
+#	-- BKS 10-17-1999
+CFG_VARS	=					\
+		"INST_TOP=$(INST_TOP)"			\
+		"INST_VER=$(INST_VER)"			\
+		"INST_ARCH=$(INST_ARCH)"		\
+		"archname=$(ARCHNAME)"			\
+		"cc=$(CC)"				\
+		"ld=$(LINK32)"				\
+		"ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
+		"cf_email=$(EMAIL)"			\
+		"d_mymalloc=$(PERL_MALLOC)"		\
+		"libs=$(LIBFILES)"			\
+		"incpath=$(CCINCDIR)"			\
+		"libperl=$(subst ..\,,$(PERLIMPLIB))"	\
+		"libpth=$(CCLIBDIR);$(EXTRALIBDIRS)"	\
+		"libc=$(LIBC)"				\
+		"make=$(MAKE)"				\
+		"_o=$(o)"				\
+		"obj_ext=$(o)"				\
+		"_a=$(a)"				\
+		"lib_ext=$(a)"				\
+		"static_ext=$(STATIC_EXT)"		\
+		"usethreads=$(USE_ITHREADS)"		\
+		"useithreads=$(USE_ITHREADS)"		\
+		"usemultiplicity=$(USE_MULTI)"		\
+		"useperlio=$(USE_PERLIO)"		\
+		"use64bitint=$(USE_64_BIT_INT)"		\
+		"uselongdouble=$(USE_LONG_DOUBLE)"	\
+		"uselargefiles=$(USE_LARGE_FILES)"	\
+		"usesitecustomize=$(USE_SITECUST)"	\
+		"LINK_FLAGS=$(LINK_FLAGS)"		\
+		"optimize=$(OPTIMIZE)"			\
+		"ARCHPREFIX=$(ARCHPREFIX)"		\
+		"WIN64=$(WIN64)"
+
+#
+# Top targets
+#
+
+.PHONY: all info
+
+all : info .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL)	\
+	$(CONFIGPM) $(UNIDATAFILES) MakePPPort			\
+	$(PERLEXE) Extensions Extensions_nonxs $(PERLSTATIC)
+
+info :
+	@echo # GCCBIN=$(GCCBIN)
+	@echo # GCCVER=$(GCCVER1).$(GCCVER2).$(GCCVER3)
+	@echo # GCCTARGET=$(GCCTARGET)
+	@echo # GCCCROSS=$(GCCCROSS)
+	@echo # WIN64=$(WIN64)
+	@echo # ARCHITECTURE=$(ARCHITECTURE)
+	@echo # ARCHNAME=$(ARCHNAME)
+	@echo # MAKE=$(MAKE)
+ifeq ($(GCCTARGET),)
+	@echo Unable to detect gcc and/or architecture!
+	@exit 1
+endif
+
+
+regnodes : ..\regnodes.h
+
+..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
+
+..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
+
+reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL)	\
+	$(CONFIGPM) $(UNIDATAFILES) $(PERLEXE)				\
+	Extensions_reonly
+
+static: $(PERLEXESTATIC)
+
+#----------------------------------------------------------------
+
+$(GLOBEXE) : perlglob$(o)
+	$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
+
+perlglob$(o)  : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+	copy $(CFGSH_TMPL) config.w32
+
+#
+# Copy the template config.h and set configurables at the end of it
+# as per the options chosen and compiler used.
+# Note: This config.h is only used to build miniperl.exe anyway, but
+# it's as well to have its options correct to be sure that it builds
+# and so that it's "-V" options are correct for use by makedef.pl. The
+# real config.h used to build perl.exe is generated from the top-level
+# config_h.SH by config_h.PL (run by miniperl.exe).
+#
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
+	-del /f config.h
+	copy $(CFGH_TMPL) config.h
+	@echo.>>$@
+	@echo #ifndef _config_h_footer_>>$@
+	@echo #define _config_h_footer_>>$@
+	@echo #undef Off_t>>$@
+	@echo #undef LSEEKSIZE>>$@
+	@echo #undef Off_t_size>>$@
+	@echo #undef PTRSIZE>>$@
+	@echo #undef SSize_t>>$@
+	@echo #undef HAS_ATOLL>>$@
+	@echo #undef HAS_STRTOLL>>$@
+	@echo #undef HAS_STRTOULL>>$@
+	@echo #undef Size_t_size>>$@
+	@echo #undef IVTYPE>>$@
+	@echo #undef UVTYPE>>$@
+	@echo #undef IVSIZE>>$@
+	@echo #undef UVSIZE>>$@
+	@echo #undef NV_PRESERVES_UV>>$@
+	@echo #undef NV_PRESERVES_UV_BITS>>$@
+	@echo #undef IVdf>>$@
+	@echo #undef UVuf>>$@
+	@echo #undef UVof>>$@
+	@echo #undef UVxf>>$@
+	@echo #undef UVXf>>$@
+	@echo #undef USE_64_BIT_INT>>$@
+	@echo #undef Gconvert>>$@
+	@echo #undef HAS_FREXPL>>$@
+	@echo #undef HAS_ISNANL>>$@
+	@echo #undef HAS_MODFL>>$@
+	@echo #undef HAS_MODFL_PROTO>>$@
+	@echo #undef HAS_SQRTL>>$@
+	@echo #undef HAS_STRTOLD>>$@
+	@echo #undef PERL_PRIfldbl>>$@
+	@echo #undef PERL_PRIgldbl>>$@
+	@echo #undef PERL_PRIeldbl>>$@
+	@echo #undef PERL_SCNfldbl>>$@
+	@echo #undef NVTYPE>>$@
+	@echo #undef NVSIZE>>$@
+	@echo #undef LONG_DOUBLESIZE>>$@
+	@echo #undef NV_OVERFLOWS_INTEGERS_AT>>$@
+	@echo #undef NVef>>$@
+	@echo #undef NVff>>$@
+	@echo #undef NVgf>>$@
+	@echo #undef USE_LONG_DOUBLE>>$@
+ifeq ($(USE_LARGE_FILES),define)
+	@echo #define Off_t $(INT64)>>$@
+	@echo #define LSEEKSIZE ^8>>$@
+	@echo #define Off_t_size ^8>>$@
+else
+	@echo #define Off_t long>>$@
+	@echo #define LSEEKSIZE ^4>>$@
+	@echo #define Off_t_size ^4>>$@
+endif
+ifeq ($(WIN64),define)
+	@echo #define PTRSIZE ^8>>$@
+	@echo #define SSize_t $(INT64)>>$@
+	@echo #define HAS_ATOLL>>$@
+	@echo #define HAS_STRTOLL>>$@
+	@echo #define HAS_STRTOULL>>$@
+	@echo #define Size_t_size ^8>>$@
+else
+	@echo #define PTRSIZE ^4>>$@
+	@echo #define SSize_t int>>$@
+	@echo #undef HAS_ATOLL>>$@
+	@echo #undef HAS_STRTOLL>>$@
+	@echo #undef HAS_STRTOULL>>$@
+	@echo #define Size_t_size ^4>>$@
+endif
+ifeq ($(USE_64_BIT_INT),define)
+	@echo #define IVTYPE $(INT64)>>$@
+	@echo #define UVTYPE unsigned $(INT64)>>$@
+	@echo #define IVSIZE ^8>>$@
+	@echo #define UVSIZE ^8>>$@
+ifeq ($(USE_LONG_DOUBLE),define)
+	@echo #define NV_PRESERVES_UV>>$@
+	@echo #define NV_PRESERVES_UV_BITS 64>>$@
+else
+	@echo #undef NV_PRESERVES_UV>>$@
+	@echo #define NV_PRESERVES_UV_BITS 53>>$@
+endif
+	@echo #define IVdf "I64d">>$@
+	@echo #define UVuf "I64u">>$@
+	@echo #define UVof "I64o">>$@
+	@echo #define UVxf "I64x">>$@
+	@echo #define UVXf "I64X">>$@
+	@echo #define USE_64_BIT_INT>>$@
+else
+	@echo #define IVTYPE long>>$@
+	@echo #define UVTYPE unsigned long>>$@
+	@echo #define IVSIZE ^4>>$@
+	@echo #define UVSIZE ^4>>$@
+	@echo #define NV_PRESERVES_UV>>$@
+	@echo #define NV_PRESERVES_UV_BITS 32>>$@
+	@echo #define IVdf "ld">>$@
+	@echo #define UVuf "lu">>$@
+	@echo #define UVof "lo">>$@
+	@echo #define UVxf "lx">>$@
+	@echo #define UVXf "lX">>$@
+	@echo #undef USE_64_BIT_INT>>$@
+endif
+ifeq ($(USE_LONG_DOUBLE),define)
+	@echo #define Gconvert(x,n,t,b) sprintf((b),"%%.*""Lg",(n),(x))>>$@
+	@echo #define HAS_FREXPL>>$@
+	@echo #define HAS_ISNANL>>$@
+	@echo #define HAS_MODFL>>$@
+	@echo #define HAS_MODFL_PROTO>>$@
+	@echo #define HAS_SQRTL>>$@
+	@echo #define HAS_STRTOLD>>$@
+	@echo #define PERL_PRIfldbl "Lf">>$@
+	@echo #define PERL_PRIgldbl "Lg">>$@
+	@echo #define PERL_PRIeldbl "Le">>$@
+	@echo #define PERL_SCNfldbl "Lf">>$@
+	@echo #define NVTYPE long double>>$@
+ifeq ($(WIN64),define)
+	@echo #define NVSIZE ^16>>$@
+	@echo #define LONG_DOUBLESIZE ^16>>$@
+else
+	@echo #define NVSIZE ^12>>$@
+	@echo #define LONG_DOUBLESIZE ^12>>$@
+endif
+	@echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0>>$@
+	@echo #define NVef "Le">>$@
+	@echo #define NVff "Lf">>$@
+	@echo #define NVgf "Lg">>$@
+	@echo #define USE_LONG_DOUBLE>>$@
+else
+	@echo #define Gconvert(x,n,t,b) sprintf((b),"%%.*g",(n),(x))>>$@
+	@echo #undef HAS_FREXPL>>$@
+	@echo #undef HAS_ISNANL>>$@
+	@echo #undef HAS_MODFL>>$@
+	@echo #undef HAS_MODFL_PROTO>>$@
+	@echo #undef HAS_SQRTL>>$@
+	@echo #undef HAS_STRTOLD>>$@
+	@echo #undef PERL_PRIfldbl>>$@
+	@echo #undef PERL_PRIgldbl>>$@
+	@echo #undef PERL_PRIeldbl>>$@
+	@echo #undef PERL_SCNfldbl>>$@
+	@echo #define NVTYPE double>>$@
+	@echo #define NVSIZE ^8>>$@
+	@echo #define LONG_DOUBLESIZE ^8>>$@
+	@echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0>>$@
+	@echo #define NVef "e">>$@
+	@echo #define NVff "f">>$@
+	@echo #define NVgf "g">>$@
+	@echo #undef USE_LONG_DOUBLE>>$@
+endif
+	@echo #endif>>$@
+
+..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
+	cd .. && miniperl -Ilib make_patchnum.pl
+
+# make sure that we recompile perl.c if the git version changes
+..\perl$(o) : ..\git_version.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# This target is for when changes to the main config.sh happen.
+# Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
+# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
+# this target to regenerate config_H.gc.
+regen_config_h:
+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS)) $(CFGSH_TMPL) > ..\config.sh
+	$(MINIPERL) -I..\lib ..\configpm --chdir=..
+	-del /f $(CFGH_TMPL)
+	-$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
+	rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
+	$(MINIPERL) -I..\lib ..\configpm --chdir=..
+	if exist lib\* $(RCOPY) "lib\*.*" ..\lib\$(NULL)
+	$(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
+	$(XCOPY) "*.h" $(COREDIR)\$(NULL)
+	$(RCOPY) include $(COREDIR)\$(NULL)
+	$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
+	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
+
+# See the comment in Makefile.SH explaining this seemingly cranky ordering
+$(MINIPERL) : ..\lib\buildcustomize.pl
+
+..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) ..\write_buildcustomize.pl
+	$(LINK32) -mconsole -o $(MINIPERL) $(BLINK_FLAGS) $(MINI_OBJ) $(LIBFILES)
+	$(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
+
+$(MINIDIR) :
+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*F).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
+# unless the .IF is true), so instead we use a else with the default.
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+
+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
+ifeq ($(USE_IMP_SYS),define)
+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+else
+	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+endif
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
+$(MINI_OBJ)	: $(CORE_NOCFG_H)
+
+$(WIN32_OBJ)	: $(CORE_H)
+
+$(CORE_OBJ)	: $(CORE_H)
+
+$(DLL_OBJ)	: $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
+	$(MINIPERL) -I..\lib create_perllibst_h.pl
+	$(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
+	$(BUILDOPT) CCTYPE=GCC TARG_DIR=..\ > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
+	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
+	   $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES)
+	$(IMPLIB) --output-lib $(PERLIMPLIB) \
+		--dllname $(PERLDLL) \
+		--def perldll.def \
+		--base-file perl.base \
+		--output-exp perl.exp
+	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
+	    $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES) perl.exp
+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
+	$(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
+	if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
+	for %%i in ($(shell type Extensions_static)) do \
+		@mkdir $(STATICDIR) && cd $(STATICDIR) && \
+		$(ARCHPREFIX)ar x ..\%%i && \
+		$(ARCHPREFIX)ar q ..\$@ *$(o) && \
+		cd .. && rmdir /s /q $(STATICDIR)
+	$(XCOPY) $(PERLSTATICLIB) $(COREDIR)
+
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
+
+$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
+
+$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
+
+$(BITCOUNT_H) : $(GENUUDMAP)
+	$(GENUUDMAP) $(GENERATED_HEADERS)
+
+$(GENUUDMAP_OBJ) : ..\mg_raw.h
+
+$(GENUUDMAP) : $(GENUUDMAP_OBJ)
+	$(LINK32) -o $@ $(BLINK_FLAGS) $(GENUUDMAP_OBJ) $(LIBFILES)
+
+perlmain.c : runperl.c
+	copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+	$(CC) $(subst -DPERLDLL,-UPERLDLL,$(CFLAGS_O)) $(OBJOUT_FLAG)$@ -c perlmain.c
+
+perlmainst.c : runperl.c
+	copy runperl.c perlmainst.c
+
+perlmainst$(o) : perlmainst.c
+	$(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \
+	    $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
+	copy $(PERLEXE) $(WPERLEXE)
+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+
+$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
+	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
+	    $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
+
+MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
+	$(MINIPERL) -I..\lib ..\mkppport
+
+#-------------------------------------------------------------------------------
+# There's no direct way to mark a dependency on
+# DynaLoader.pm, so this will have to do
+Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+	$(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
+
+Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+	$(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
+
+Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
+	$(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
+	$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
+
+Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
+	$(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
+
+$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
+	$(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
+
+Extensions_clean :
+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
+
+Extensions_realclean :
+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
+
+#-------------------------------------------------------------------------------
+
+doc: $(PERLEXE) ..\pod\perltoc.pod
+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
+	    --podpath=pod:lib:utils --htmlroot="file://$(subst :,|,$(INST_HTML))"\
+	    --recurse
+
+..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
+	$(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
+
+# Note that this next section is parsed (and regenerated) by pod/buildtoc
+# so please check that script before making structural changes here
+utils: $(PERLEXE) ..\utils\Makefile
+	cd ..\utils && $(MAKE) PERL=$(MINIPERL)
+	copy ..\README.aix      ..\pod\perlaix.pod
+	copy ..\README.amiga    ..\pod\perlamiga.pod
+	copy ..\README.android  ..\pod\perlandroid.pod
+	copy ..\README.bs2000   ..\pod\perlbs2000.pod
+	copy ..\README.ce       ..\pod\perlce.pod
+	copy ..\README.cn       ..\pod\perlcn.pod
+	copy ..\README.cygwin   ..\pod\perlcygwin.pod
+	copy ..\README.dos      ..\pod\perldos.pod
+	copy ..\README.freebsd  ..\pod\perlfreebsd.pod
+	copy ..\README.haiku    ..\pod\perlhaiku.pod
+	copy ..\README.hpux     ..\pod\perlhpux.pod
+	copy ..\README.hurd     ..\pod\perlhurd.pod
+	copy ..\README.irix     ..\pod\perlirix.pod
+	copy ..\README.jp       ..\pod\perljp.pod
+	copy ..\README.ko       ..\pod\perlko.pod
+	copy ..\README.linux    ..\pod\perllinux.pod
+	copy ..\README.macos    ..\pod\perlmacos.pod
+	copy ..\README.macosx   ..\pod\perlmacosx.pod
+	copy ..\README.netware  ..\pod\perlnetware.pod
+	copy ..\README.openbsd  ..\pod\perlopenbsd.pod
+	copy ..\README.os2      ..\pod\perlos2.pod
+	copy ..\README.os390    ..\pod\perlos390.pod
+	copy ..\README.os400    ..\pod\perlos400.pod
+	copy ..\README.plan9    ..\pod\perlplan9.pod
+	copy ..\README.qnx      ..\pod\perlqnx.pod
+	copy ..\README.riscos   ..\pod\perlriscos.pod
+	copy ..\README.solaris  ..\pod\perlsolaris.pod
+	copy ..\README.symbian  ..\pod\perlsymbian.pod
+	copy ..\README.synology ..\pod\perlsynology.pod
+	copy ..\README.tru64    ..\pod\perltru64.pod
+	copy ..\README.tw       ..\pod\perltw.pod
+	copy ..\README.vos      ..\pod\perlvos.pod
+	copy ..\README.win32    ..\pod\perlwin32.pod
+	copy ..\pod\perldelta.pod ..\pod\perl5217delta.pod
+	$(PERLEXE) $(PL2BAT) $(UTILS)
+	$(MINIPERL) -I..\lib ..\autodoc.pl ..
+	$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
+
+..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
+	$(PERLEXE) -f ..\pod\buildtoc -q
+
+# Note that the pod cleanup in this next section is parsed (and regenerated
+# by pod/buildtoc so please check that script before making changes here
+
+distclean: realclean
+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+		$(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
+	-del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
+	-del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+	-del /f $(LIBDIR)\File\Glob.pm
+	-del /f $(LIBDIR)\Storable.pm
+	-del /f $(LIBDIR)\Sys\Hostname.pm
+	-del /f $(LIBDIR)\Time\HiRes.pm
+	-del /f $(LIBDIR)\Unicode\Normalize.pm
+	-del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
+	-del /f $(LIBDIR)\Win32.pm
+	-del /f $(LIBDIR)\Win32CORE.pm
+	-del /f $(LIBDIR)\Win32API\File.pm
+	-del /f $(LIBDIR)\Win32API\File\cFile.pc
+	-del /f $(LIBDIR)\buildcustomize.pl
+	-del /f $(DISTDIR)\XSLoader\XSLoader.pm
+	-del /f *.def *.map
+	-if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
+	-if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
+	-if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
+	-if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
+	-if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
+	-if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
+	-if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
+	-if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+	-if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
+	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
+	-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
+	-if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
+	-if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
+	-if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
+	-if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
+	-if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
+	-if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
+	-if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
+	-if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
+	-if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
+	-if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
+	-if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
+	-if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+	-if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
+	-if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+	-if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
+	-if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
+	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+	-if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
+	-if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
+	-if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
+	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+	-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
+	-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+	-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
+	-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
+	-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
+	-if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
+	-if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
+	-if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
+	-if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
+	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+	-if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
+	-if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
+	-if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+	-if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
+	-if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
+	-if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
+	-if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
+	-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+	-if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
+	-if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
+	-if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
+	-if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
+	-if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
+	-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
+	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+	-cd $(PODDIR) && del /f *.html *.bat roffitall \
+	    perl5217delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+	    perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
+	    perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
+	    perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
+	    perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
+	    perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+	    perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
+	    perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
+	    perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
+	    perlwin32.pod
+	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+	    perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
+	    xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
+	-del /f ..\config.sh perlmain.c dlutils.c config.h.new \
+	    perlmainst.c
+	-del /f $(CONFIGPM)
+	-del /f ..\lib\Config_git.pl
+	-del /f "bin\*.bat"
+	-del /f perllibst.h
+	-del /f $(PERLEXE_RES) perl.base
+	-cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
+	-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+	-cd $(DISTDIR) && del /s *.def Makefile Makefile.old
+	-cd $(CPANDIR) && del /s *.def Makefile Makefile.old
+	-del /s ..\utils\Makefile
+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+	-if exist $(COREDIR) rmdir /s /q $(COREDIR)
+	-if exist pod2htmd.tmp del pod2htmd.tmp
+	-if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
+	-del /f ..\t\test_state
+
+install : all installbare installhtml
+
+installbare : utils ..\pod\perltoc.pod
+	$(PERLEXE) ..\installperl
+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\$(NULL)
+	if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\$(NULL)
+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\$(NULL)
+	if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\$(NULL)
+	$(XCOPY) "bin\*.bat" $(INST_SCRIPT)\$(NULL)
+
+installhtml : doc
+	$(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\$(NULL)
+
+inst_lib : $(CONFIGPM)
+	$(RCOPY) ..\lib $(INST_LIB)\$(NULL)
+
+$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
+	cd ..\lib\unicore && \
+	..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
+	$(XCOPY) $(MINIPERL) ..\t\$(NULL)
+	if exist ..\t\perl.exe del /f ..\t\perl.exe
+	rename ..\t\miniperl.exe perl.exe
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	attrib -r "..\t\*.*"
+	cd ..\t && \
+	$(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
+
+test-prep : all utils ..\pod\perltoc.pod
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+# If building with gcc versions 4.x.x or greater, then
+# the GCC helper DLL will also need copied to the test directory.
+# The name of the dll can change, depending upon which vendor has supplied
+# your compiler, and upon the values of "x".
+# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
+# Without this copying, the op/taint.t test script will fail.
+	if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
+	if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
+	if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
+	if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
+	if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)
+
+test : test-prep
+	set PERL_STATIC_EXT=$(STATIC_EXT) && \
+	    cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+
+test_porting : test-prep
+	set PERL_STATIC_EXT=$(STATIC_EXT) && \
+	    cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
+
+test-reonly : reonly utils
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	cd ..\t && \
+	$(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
+	cd ..\win32
+
+regen :
+	cd .. && regen.pl && cd win32
+
+test-notty : test-prep
+	set PERL_STATIC_EXT=$(STATIC_EXT) && \
+	    set PERL_SKIP_TTY_TEST=1 && \
+	    cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+
+_test :
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	set PERL_STATIC_EXT=$(STATIC_EXT) && \
+	    cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+
+_clean :
+	-@erase miniperlmain$(o)
+	-@erase $(MINIPERL)
+	-@erase perlglob$(o)
+	-@erase perlmain$(o)
+	-@erase perlmainst$(o)
+	-@erase config.w32
+	-@erase /f config.h
+	-@erase /f ..\git_version.h
+	-@erase $(GLOBEXE)
+	-@erase $(PERLEXE)
+	-@erase $(WPERLEXE)
+	-@erase $(PERLEXESTATIC)
+	-@erase $(PERLSTATICLIB)
+	-@erase $(PERLDLL)
+	-@erase $(CORE_OBJ)
+	-@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+	-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
+	-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
+	-@erase $(UNIDATAFILES)
+	-@erase $(WIN32_OBJ)
+	-@erase $(DLL_OBJ)
+	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
+	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+	-@erase *.ilk
+	-@erase *.pdb
+	-@erase Extensions_static
+
+clean : Extensions_clean _clean
+
+realclean : Extensions_realclean _clean
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "gmake nok" instead.
+ok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok