WIN64 (Itanium) port of Perl 5.6.1

Message-ID: <816D93CCC927D31188570008C75D1DE10A5CB1F8@dbwdfx1a.wdf.sap-ag.de>

p4raw-id: //depot/perl@12457

1 files changed, 1173 insertions, 0 deletions

diff --git a/win32/Makefile.win64 b/win32/Makefile.win64
new file mode 100644
index 0000000000..11b96f463e
--- /dev/null
+++ b/win32/Makefile.win64
@@ -0,0 +1,1173 @@
+#
+# Makefile to build perl on Windows NT 64 Bit using Microsoft NMAKE.
+#
+# Building for Itanium requires the latest SDK, a (currently unsupported)
+# native Microsoft IA64 Compiler (13.00.9367.7 for IA-64 or higher), and
+# of course an Itanium box running Windows XP.
+# Quick start:
+# 1) Edit INST_TOP and INST_DRV in this Makefile if necessary.
+# 2) nmake -f Makefile.win64
+# 3) nmake -f Makefile.win64 test
+#    => Currently lib/posix.t 2 and op/64bitint.t 23, 53-55 will fail
+# 4) nmake -f Makefile.win64 install
+#
+# This Configuration eanbles 64 Bit porting warning (/Wp64). Watch out for C4700
+# warnings when porting addon modules to WIN64, most of them will result in runtime
+# crashes. Remember that most data types remain unchanged on WIN64. Especially long
+# is still 32 Bit. Native 64 Bit datatypes are for example __int64 or size_t. If
+# you really need to add WIN64 specific code use ifdef _WIN64.
+#
+# randolf.werner@sap.com
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+## If you want a configuration that is the same as ActivePerl (see
+## www.ActiveState.com) make sure you set at least BUILD_FLAVOR below!
+##
+
+##
+## Build configuration.  Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "nmake install" to put your newly
+# built perl.  Setting it to a path with spaces is NOT recommended.
+#
+INST_DRV	= c:
+INST_TOP	= $(INST_DRV)\perl64
+
+#
+# uncomment one of the following lines if you are using either
+# Visual C++ 2.x, or Visual C++ 5.x (aka Visual Studio 97) _without_
+# service pack 3 applied.
+#
+# If you have 5.x SP3 or later, or 6.x, no change is required.
+#
+#CCTYPE		= MSVC20
+#CCTYPE		= MSVC_PRE_50SP3
+
+#
+# set the install locations of the compiler include/libraries. Running
+# VCVARS32.BAT is *required* when using Visual C.  Some versions of
+# Visual C earlier than 5.x SP3 don't define MSVCDIR in the environment.
+# If such is the case you may have to set CCHOME explicitly.  Spaces in
+# the path name should not be quoted.
+#
+# If you have run VCVARS32.BAT and have VC 5.x SP3 or later, the defaults
+# should just work.
+#
+#CCHOME		= f:\msvc20
+CCHOME		= $(MSVCDIR)
+CCINCDIR	= $(CCHOME)\include
+CCLIBDIR	= $(CCHOME)\lib
+
+#
+# if you have the source for des_fcrypt(), uncomment CRYPT_SRC and make sure
+# the file exists (see README.win32).  File should be located in the same
+# directory as this makefile.
+#
+# If you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment CRYPT_LIB, and make sure the library exists (see
+# README.win32).  Specify the full pathname of the library.
+#
+# If you don't enable one of these, the crypt() builtin will fail to work.
+# (Generally not critical.)
+#
+#CRYPT_SRC	= fcrypt.c
+#CRYPT_LIB	= fcrypt.lib
+
+#
+# uncomment this option if you want to bulk-enable all the options that
+# ActiveState uses to build their ActivePerl distribution.  If you set this,
+# there should be no need to set any of the other options that follow.
+#
+# If you don't enable this, the defaults below will get you the most
+# efficient perl configuration possible that will also be compatible
+# with the build defaults used on Unix platforms.  On the other hand,
+# the ActivePerl configuration will get you fork() emulation at the
+# cost of some added bloat.
+#
+#BUILD_FLAVOR	= ActivePerl
+
+#
+# uncomment next line if you want debug version of perl (big and slow).
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
+#CFG		= Debug
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location.  Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to.  If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+INST_VER = \5.6.1
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components.  This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files.  Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location.  Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+INST_ARCH = \$(ARCHNAME)
+
+#
+# uncomment to enable multiple interpreters.  This is need for fork()
+# emulation.
+#
+#USE_MULTI = define
+
+#
+# Beginnings of interpreter cloning/threads; still very incomplete.
+# This should be enabled to get the fork() emulation.  This needs
+# USE_MULTI as well.
+#
+#USE_ITHREADS = define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl.  This needs USE_MULTI above.  This is also needed to
+# get fork().
+#
+#USE_IMP_SYS = define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_ITHREADS instead).
+#
+# uncomment to enable threads-capabilities.  This is incompatible with
+# USE_ITHREADS, and is only here for people who may have come to rely
+# on the experimental Thread support that was in 5.005.
+#
+#USE_5005THREADS= define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_MULTI instead).
+#
+# uncomment next line if you want to use the PERL_OBJECT build option.
+# DO NOT ENABLE unless you have legacy code that relies on the C++
+# CPerlObj class that was available in 5.005.  This cannot be enabled
+# if you ask for USE_5005THREADS or USE_MULTI above.
+#
+#USE_OBJECT	= define
+
+#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
+#USE_PERLCRT	= define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this option enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful, or use perl inside shells
+# that do the expansion for you.  This option is supported only
+# with Visual C.
+#
+#USE_SETARGV	= define
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it.  Be prepared to recompile all
+# extensions if you change the default.  Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC	= define
+
+#
+# Additional compiler flags can be specified here.
+#
+
+#
+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution.  You most
+# probably just want to build modules that won't compile with
+#         perl Makefile.PL POLLUTE=1
+# instead of enabling this.  Please report such modules to the respective
+# authors.
+#
+#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE
+
+#
+# This should normally be disabled.  Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled.  Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS	=
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL		=
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+!IF "$(BUILD_FLAVOR)" == "ActivePerl"
+INST_VER	= 
+INST_ARCH	= 
+USE_MULTI	= define
+USE_ITHREADS	= define
+USE_IMP_SYS	= define
+USE_5005THREADS	= undef
+USE_OBJECT	= undef
+USE_PERLCRT	= undef
+USE_SETARGV	=
+PERL_MALLOC	= undef
+!ENDIF
+
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT		= undef
+!ELSE
+D_CRYPT		= define
+CRYPT_FLAG	= -DHAVE_DES_FCRYPT
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+PERL_MALLOC	= undef
+USE_5005THREADS	= undef
+USE_MULTI	= undef
+USE_IMP_SYS	= define
+!ENDIF
+
+!IF "$(PERL_MALLOC)" == ""
+PERL_MALLOC	= undef
+!ENDIF
+
+!IF "$(USE_5005THREADS)" == ""
+USE_5005THREADS	= undef
+!ENDIF
+
+!IF "$(USE_5005THREADS)" == "define"
+USE_ITHREADS	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC	= undef
+!ENDIF
+
+!IF "$(CCTYPE)" == ""
+CCTYPE		= MSVC60
+!ENDIF
+
+!IF "$(USE_MULTI)" == ""
+USE_MULTI	= undef
+!ENDIF
+
+!IF "$(USE_OBJECT)" == ""
+USE_OBJECT	= undef
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == ""
+USE_ITHREADS	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == ""
+USE_IMP_SYS	= undef
+!ENDIF
+
+!IF "$(USE_PERLCRT)" == ""
+USE_PERLCRT	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+USE_MULTI	= define
+!ENDIF
+
+!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+USE_MULTI	= define
+USE_5005THREADS	= undef
+!ENDIF
+
+!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
+!ENDIF
+
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""
+PROCESSOR_ARCHITECTURE	= x86
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+!ELSE
+!IF "$(USE_5005THREADS)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+!ELSE
+!IF "$(USE_MULTI)" == "define"
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+!ELSE
+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
+!ENDIF
+!ENDIF
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == "define"
+ARCHNAME	= $(ARCHNAME)-thread
+!ENDIF
+
+# Visual Studio 98 specific
+!IF "$(CCTYPE)" == "MSVC60"
+# VC 6.0 can load the socket dll on demand.  Makes the test suite
+# run in about 10% less time.
+DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib 
+!ENDIF
+
+
+ARCHDIR		= ..\lib\$(ARCHNAME)
+COREDIR		= ..\lib\CORE
+AUTODIR		= ..\lib\auto
+LIBDIR		= ..\lib
+EXTDIR		= ..\ext
+PODDIR		= ..\pod
+EXTUTILSDIR	= $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB	= $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
+INST_COREDIR	= $(INST_ARCHLIB)\CORE
+INST_POD	= $(INST_LIB)\pod
+INST_HTML	= $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+CC		= cl
+LINK32		= link
+LIB32		= $(LINK32) -lib
+RSC		= rc
+
+#
+# Options
+#
+
+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 
+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -TP -GX
+
+!IF "$(USE_PERLCRT)" != "define"
+LIBC	= msvcrt.lib
+!ELSE
+LIBC	= PerlCRT.lib
+!ENDIF
+
+PERLEXE_RES	=
+PERLDLL_RES	=
+
+!IF  "$(CFG)" == "Debug"
+!  IF "$(CCTYPE)" == "MSVC20"
+OPTIMIZE	= -DCONSERVATIVE -Wp64 -Od -Op -MD -Z7 -DDEBUGGING
+!  ELSE
+OPTIMIZE	= -DCONSERVATIVE -Wp64 -Od -Op -MD -Zi -DDEBUGGING
+!  ENDIF
+LINK_DBG	= -debug
+!ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2
+OPTIMIZE	= -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG
+# VC 6.0 seems capable of compiling perl correctly with optimizations
+# enabled.  Anything earlier fails tests.
+!  IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC_PRE_50SP3"
+OPTIMIZE	= -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG
+!  ENDIF
+LINK_DBG	= -debug
+!ENDIF
+
+
+!IF "$(USE_OBJECT)" == "define"
+OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)
+BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT
+!ENDIF
+
+!IF "$(USE_PERLCRT)" != "define"
+BUILDOPT	= $(BUILDOPT)
+!ENDIF
+
+LIBBASEFILES	= $(CRYPT_LIB) \
+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+		version.lib odbc32.lib odbccp32.lib
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES	= $(LIBBASEFILES) $(LIBC)
+
+CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+		$(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
+		-libpath:"$(INST_COREDIR)" \
+		-machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG	= -Fo
+EXEOUT_FLAG	= -Fe
+
+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o = .obj
+
+#
+# Rules
+# 
+
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
+
+.c$(o):
+	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+	$(NOOP)
+
+$(o).dll:
+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  
+
+.rc.res:
+	$(RSC) -i.. $<
+
+#
+# various targets
+PERLIMPLIB	= ..\perl56.lib
+PERLDLL		= ..\perl56.dll
+
+MINIPERL	= ..\miniperl.exe
+MINIDIR		= .\mini
+PERLEXE		= ..\perl.exe
+WPERLEXE	= ..\wperl.exe
+GLOBEXE		= ..\perlglob.exe
+CONFIGPM	= ..\lib\Config.pm
+MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
+X2P		= ..\x2p\a2p.exe
+
+PL2BAT		= bin\pl2bat.pl
+GLOBBAT		= bin\perlglob.bat
+
+UTILS		=			\
+		..\utils\h2ph		\
+		..\utils\splain		\
+		..\utils\dprofpp	\
+		..\utils\perlbug	\
+		..\utils\pl2pm 		\
+		..\utils\c2ph		\
+		..\utils\h2xs		\
+		..\utils\perldoc	\
+		..\utils\perlcc		\
+		..\pod\checkpods	\
+		..\pod\pod2html		\
+		..\pod\pod2latex	\
+		..\pod\pod2man		\
+		..\pod\pod2text		\
+		..\pod\pod2usage	\
+		..\pod\podchecker	\
+		..\pod\podselect	\
+		..\x2p\find2perl	\
+		..\x2p\s2p		\
+		bin\exetype.pl		\
+		bin\runperl.pl		\
+		bin\pl2bat.pl		\
+		bin\perlglob.pl		\
+		bin\search.pl
+
+MAKE		= nmake -nologo
+
+CFGSH_TMPL	= config.win64
+CFGH_TMPL	= config_H.win64
+
+XCOPY		= xcopy /f /r /i /d
+RCOPY		= xcopy /f /r /i /e /d
+NOOP		= @echo
+NULL		=
+
+#
+# filenames given to xsubpp must have forward slashes (since it puts
+# full pathnames in #line strings)
+XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+		-C++ -prototypes
+
+MICROCORE_SRC	=		\
+		..\av.c		\
+		..\deb.c	\
+		..\doio.c	\
+		..\doop.c	\
+		..\dump.c	\
+		..\globals.c	\
+		..\gv.c		\
+		..\hv.c		\
+		..\mg.c		\
+		..\op.c		\
+		..\perl.c	\
+		..\perlapi.c	\
+		..\perly.c	\
+		..\pp.c		\
+		..\pp_ctl.c	\
+		..\pp_hot.c	\
+		..\pp_sys.c	\
+		..\regcomp.c	\
+		..\regexec.c	\
+		..\run.c	\
+		..\scope.c	\
+		..\sv.c		\
+		..\taint.c	\
+		..\toke.c	\
+		..\universal.c	\
+		..\utf8.c	\
+		..\util.c	\
+		..\xsutils.c
+
+EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c
+
+!IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
+!ENDIF
+
+!IF "$(USE_OBJECT)" != "define"
+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
+!ENDIF
+
+WIN32_SRC	=		\
+		.\win32.c	\
+		.\win32sck.c	\
+		.\win32thread.c 
+
+!IF "$(CRYPT_SRC)" != ""
+WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
+!ENDIF
+
+DLL_SRC		= $(DYNALOADER).c
+
+X2P_SRC		=		\
+		..\x2p\a2p.c	\
+		..\x2p\hash.c	\
+		..\x2p\str.c	\
+		..\x2p\util.c	\
+		..\x2p\walk.c
+
+CORE_NOCFG_H	=		\
+		..\av.h		\
+		..\cop.h	\
+		..\cv.h		\
+		..\dosish.h	\
+		..\embed.h	\
+		..\form.h	\
+		..\gv.h		\
+		..\handy.h	\
+		..\hv.h		\
+		..\iperlsys.h	\
+		..\mg.h		\
+		..\nostdio.h	\
+		..\op.h		\
+		..\opcode.h	\
+		..\perl.h	\
+		..\perlapi.h	\
+		..\perlsdio.h	\
+		..\perlsfio.h	\
+		..\perly.h	\
+		..\pp.h		\
+		..\proto.h	\
+		..\regexp.h	\
+		..\scope.h	\
+		..\sv.h		\
+		..\thread.h	\
+		..\unixish.h	\
+		..\utf8.h	\
+		..\util.h	\
+		..\warnings.h	\
+		..\XSUB.h	\
+		..\EXTERN.h	\
+		..\perlvars.h	\
+		..\intrpvar.h	\
+		..\thrdvar.h	\
+		.\include\dirent.h	\
+		.\include\netdb.h	\
+		.\include\sys\socket.h	\
+		.\win32.h
+
+CORE_H		= $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
+WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
+MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
+		  $(MINIDIR)\miniperlmain$(o)	\
+		  $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ		= $(DLL_SRC:.c=.obj)
+X2P_OBJ		= $(X2P_SRC:.c=.obj)
+
+PERLDLL_OBJ	= $(CORE_OBJ)
+PERLEXE_OBJ	= perlmain$(o)
+
+PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ	= setargv$(o)
+!ENDIF
+
+DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
+		Sys/Hostname
+STATIC_EXT	= DynaLoader
+NONXS_EXT	= Errno
+
+DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
+SOCKET		= $(EXTDIR)\Socket\Socket
+FCNTL		= $(EXTDIR)\Fcntl\Fcntl
+OPCODE		= $(EXTDIR)\Opcode\Opcode
+SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File
+IO		= $(EXTDIR)\IO\IO
+POSIX		= $(EXTDIR)\POSIX\POSIX
+ATTRS		= $(EXTDIR)\attrs\attrs
+THREAD		= $(EXTDIR)\Thread\Thread
+B		= $(EXTDIR)\B\B
+RE		= $(EXTDIR)\re\re
+DUMPER		= $(EXTDIR)\Data\Dumper\Dumper
+ERRNO		= $(EXTDIR)\Errno\Errno
+PEEK		= $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader
+DPROF		= $(EXTDIR)\Devel\DProf\DProf
+GLOB		= $(EXTDIR)\File\Glob\Glob
+HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname
+
+SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll
+FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll
+OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll
+SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll
+IO_DLL		= $(AUTODIR)\IO\IO.dll
+POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll
+ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll
+THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll
+B_DLL		= $(AUTODIR)\B\B.dll
+DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL		= $(AUTODIR)\re\re.dll
+BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll
+GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll
+HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll
+
+ERRNO_PM	= $(LIBDIR)\Errno.pm
+
+EXTENSION_C	= 		\
+		$(SOCKET).c	\
+		$(FCNTL).c	\
+		$(OPCODE).c	\
+		$(SDBM_FILE).c	\
+		$(IO).c		\
+		$(POSIX).c	\
+		$(ATTRS).c	\
+		$(THREAD).c	\
+		$(RE).c		\
+		$(DUMPER).c	\
+		$(PEEK).c	\
+		$(B).c		\
+		$(BYTELOADER).c	\
+		$(DPROF).c	\
+		$(GLOB).c	\
+		$(HOSTNAME).c
+
+EXTENSION_DLL	= 		\
+		$(SOCKET_DLL)	\
+		$(FCNTL_DLL)	\
+		$(OPCODE_DLL)	\
+		$(SDBM_FILE_DLL)\
+		$(IO_DLL)	\
+		$(POSIX_DLL)	\
+		$(ATTRS_DLL)	\
+		$(DUMPER_DLL)	\
+		$(PEEK_DLL)	\
+		$(B_DLL)	\
+		$(RE_DLL)	\
+		$(THREAD_DLL)	\
+		$(BYTELOADER_DLL)	\
+		$(DPROF_DLL)	\
+		$(GLOB_DLL)	\
+		$(HOSTNAME_DLL)
+
+EXTENSION_PM	=		\
+		$(ERRNO_PM)
+
+POD2HTML	= $(PODDIR)\pod2html
+POD2MAN		= $(PODDIR)\pod2man
+POD2LATEX	= $(PODDIR)\pod2latex
+POD2TEXT	= $(PODDIR)\pod2text
+
+CFG_VARS	=					\
+		"INST_DRV=$(INST_DRV)"			\
+		"INST_TOP=$(INST_TOP)"			\
+		"INST_VER=$(INST_VER)"			\
+		"INST_ARCH=$(INST_ARCH)"		\
+		"archname=$(ARCHNAME)"			\
+		"cc=$(CC)"				\
+		"ccflags=-nologo $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
+		"cf_email=$(EMAIL)"			\
+		"d_crypt=$(D_CRYPT)"			\
+		"d_mymalloc=$(PERL_MALLOC)"		\
+		"libs=$(LIBFILES)"			\
+		"incpath=$(CCINCDIR:"=\")"		\
+		"libperl=$(PERLIMPLIB:..\=)"		\
+		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
+		"libc=$(LIBC)"				\
+		"make=nmake"				\
+		"static_ext=$(STATIC_EXT)"		\
+		"dynamic_ext=$(DYNAMIC_EXT)"		\
+		"nonxs_ext=$(NONXS_EXT)"		\
+		"use5005threads=$(USE_5005THREADS)"	\
+		"useithreads=$(USE_ITHREADS)"		\
+		"usethreads=$(USE_5005THREADS)"		\
+		"usemultiplicity=$(USE_MULTI)"		\
+		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
+		"optimize=$(OPTIMIZE:"=\")"
+
+#
+# Top targets
+#
+
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
+
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+
+#------------------------------------------------------------
+
+$(GLOBEXE) : perlglob$(o)
+	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+	    perlglob$(o) setargv$(o) 
+
+perlglob$(o)  : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+	copy $(CFGSH_TMPL) config.w32
+
+.\config.h : $(CFGH_TMPL)
+	-del /f config.h
+	copy $(CFGH_TMPL) config.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL
+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+	cd ..
+	-del /f perl.exe
+	perl configpm
+	cd win32
+	-del /f $(CFGH_TMPL)
+	-mkdir $(COREDIR)
+	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+	rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
+	cd .. && miniperl configpm
+	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(XCOPY) *.h $(COREDIR)\*.*
+	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+	$(RCOPY) include $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+	    || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
+	$(LINK32) -subsystem:console -out:$@ @<<
+	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
+<<
+
+$(MINIDIR) :
+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+!ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ)	: $(CORE_NOCFG_H)
+
+$(WIN32_OBJ)	: $(CORE_H)
+$(CORE_OBJ)	: $(CORE_H)
+$(DLL_OBJ)	: $(CORE_H)
+$(X2P_OBJ)	: $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
+	    CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
+		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
+<<
+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl
+	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+	$(MINIPERL) ..\x2p\find2perl.PL
+	$(MINIPERL) ..\x2p\s2p.PL
+	$(LINK32) -subsystem:console -out:$@ @<<
+		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
+<<
+
+perlmain.c : runperl.c 
+	copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
+	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+	copy $(PERLEXE) $(WPERLEXE)
+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+	copy splittree.pl .. 
+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
+	if not exist $(AUTODIR) mkdir $(AUTODIR)
+	cd $(EXTDIR)\$(*B)
+	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
+	cd ..\..\win32
+	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
+	cd $(EXTDIR)\$(*B)
+	$(XSUBPP) dl_win32.xs > $(*B).c
+	cd ..\..\win32
+
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+	cd $(EXTDIR)\Data\$(*B)
+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\..\win32
+
+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
+	cd $(EXTDIR)\Devel\$(*B)
+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\..\win32
+
+$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
+	cd $(EXTDIR)\File\$(*B)
+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\..\win32
+
+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
+	cd $(EXTDIR)\Devel\$(*B)
+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\..\win32
+
+$(RE_DLL): $(PERLEXE) $(RE).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(B_DLL): $(PERLEXE) $(B).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(IO_DLL): $(PERLEXE) $(IO).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
+	cd $(EXTDIR)\Sys\$(*B)
+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\..\win32
+
+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
+	cd $(EXTDIR)\$(*B)
+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+	$(MAKE)
+	cd ..\..\win32
+
+doc: $(PERLEXE)
+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
+	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+
+utils: $(PERLEXE) $(X2P)
+	cd ..\utils
+	$(MAKE) PERL=$(MINIPERL)
+	cd ..\pod
+	copy ..\README.aix	.\perlaix.pod
+	copy ..\README.amiga	.\perlamiga.pod
+	copy ..\README.bs2000	.\perlbs2000.pod
+	copy ..\README.cygwin	.\perlcygwin.pod
+	copy ..\README.dos	.\perldos.pod
+	copy ..\README.epoc	.\perlepoc.pod
+	copy ..\README.hpux	.\perlhpux.pod
+	copy ..\README.mpeix	.\perlmpeix.pod
+	copy ..\README.os2	.\perlos2.pod
+	copy ..\README.os390	.\perlos390.pod
+	copy ..\README.solaris	.\perlsolaris.pod
+	copy ..\README.vmesa	.\perlvmesa.pod
+	copy ..\vms\perlvms.pod	.\perlvms.pod
+	copy ..\README.vos	.\perlvos.pod
+	copy ..\README.win32	.\perlwin32.pod
+	$(MAKE) -f ..\win32\pod.mak converters
+	cd ..\win32
+	$(PERLEXE) $(PL2BAT) $(UTILS)
+
+distclean: clean
+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
+	-del /f *.def *.map
+	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
+	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs $(EXTDIR)\DynaLoader\DynaLoader.pm
+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+	-del /f $(LIBDIR)\XSLoader.pm $(EXTDIR)\DynaLoader\XSLoader.pm
+	-del /f $(LIBDIR)\Devel\.exists $(LIBDIR)\File\.exists $(LIBDIR)\Sys\.exists
+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+	-del /f $(LIBDIR)\B.pm $(EXTDIR)\B\defsubs.h $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+	-del /f $(LIBDIR)\File\Glob.pm
+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
+	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
+	cd $(PODDIR)
+	-del /f *.html *.bat checkpods \
+	    perlaix.pod perlamiga.pod perlbs2000.pod perlcygwin.pod \
+	    perldos.pod perlepoc.pod perlhpux.pod perlmachten.pod \
+	    perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \
+	    perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \
+	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+	    podchecker podselect
+	cd ..\utils
+	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp \
+	    *.bat perlcc pstruct
+	cd ..\win32
+	cd ..\x2p
+	-del /f find2perl s2p
+	-del /f *.bat
+	cd ..\win32
+	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+	-del /f $(CONFIGPM)
+	-del /f bin\*.bat
+	cd $(EXTDIR)
+	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
+	cd ..\win32
+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
+	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : utils
+	$(PERLEXE) ..\installperl
+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+	$(RCOPY) html\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+	copy splittree.pl .. 
+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+	$(RCOPY) ..\lib $(INST_LIB)\*.*
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+	$(XCOPY) $(MINIPERL) ..\t\perl.exe
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	attrib -r ..\t\*.*
+	copy test ..\t
+	cd ..\t
+	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+	cd ..\win32
+
+test-prep : all utils
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+
+test : test-prep
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+test-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+test-wide : test-prep
+	set HARNESS_PERL_SWITCHES=-C
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+test-wide-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1
+	set HARNESS_PERL_SWITCHES=-C
+	cd ..\t
+	$(PERLEXE) -I..\lib harness
+	cd ..\win32
+
+clean : 
+	-@erase miniperlmain$(o)
+	-@erase $(MINIPERL)
+	-@erase perlglob$(o)
+	-@erase perlmain$(o)
+	-@erase config.w32
+	-@erase /f config.h
+	-@erase $(GLOBEXE)
+	-@erase $(PERLEXE)
+	-@erase $(WPERLEXE)
+	-@erase $(PERLDLL)
+	-@erase $(CORE_OBJ)
+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
+	-@erase $(WIN32_OBJ)
+	-@erase $(DLL_OBJ)
+	-@erase $(X2P_OBJ)
+	-@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
+	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+	-@erase ..\x2p\*.exe ..\x2p\*.bat
+	-@erase *.ilk
+	-@erase *.pdb
+ 
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "nmake nok" instead.
+ok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+ 
+nok: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+ 
+nokfile: utils
+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok