Regenerate the win32/config_H.* files using the makefile targets

fixed-up by #33349.

There shouldn't be any real changes here. If there are then I've
screwed up.

p4raw-id: //depot/perl@33350

1 files changed, 1734 insertions, 1704 deletions

diff --git a/win32/config_H.gc b/win32/config_H.gc
index c9af417c74..9d594c4cdf 100644
--- a/win32/config_H.gc
+++ b/win32/config_H.gc
@@ -7,14 +7,14 @@
  * that running config_h.SH again will wipe out any changes you've made.
  * For a more permanent change edit undef and rerun config_h.SH.
  *
- * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
+ * $Id: Config_h.U 1 2006-08-24 12:32:52Z rmanfredi $
  */
 
 /*
  * Package name      : perl5
  * Source directory  : 
- * Configuration time: Mon Mar 17 20:15:35 2003
- * Configured by     : gsar
+ * Configuration time: Fri Feb 22 17:35:20 2008
+ * Configured by     : shay
  * Target system     : 
  */
 
@@ -68,17 +68,6 @@
  */
 #define	HAS_CHSIZE		/**/
 
-/* HASCONST:
- *	This symbol, if defined, indicates that this C compiler knows about
- *	the const type. There is no need to actually test for that symbol
- *	within your programs. The mere use of the "const" keyword will
- *	trigger the necessary tests.
- */
-#define HASCONST	/**/
-#ifndef HASCONST
-#define const
-#endif
-
 /* HAS_CTERMID:
  *	This symbol, if defined, indicates that the ctermid routine is
  *	available to generate filename for terminal.
@@ -512,13 +501,6 @@
  */
 #define HAS_STRCOLL	/**/
 
-/* USE_STRUCT_COPY:
- *	This symbol, if defined, indicates that this C compiler knows how
- *	to copy structures.  If undefined, you'll need to use a block copy
- *	routine of some sort instead.
- */
-#define	USE_STRUCT_COPY	/**/
-
 /* HAS_STRTOD:
  *	This symbol, if defined, indicates that the strtod routine is
  *	available to provide better numeric string conversion than atof().
@@ -597,15 +579,6 @@
  */
 /*#define HAS_USLEEP		/**/
 
-/* HASVOLATILE:
- *	This symbol, if defined, indicates that this C compiler knows about
- *	the volatile declaration.
- */
-#define	HASVOLATILE	/**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
 /* HAS_WAIT4:
  *	This symbol, if defined, indicates that wait4() exists.
  */
@@ -635,12 +608,6 @@
  */
 #define	I_ARPA_INET		/**/
 
-/* I_ASSERT:
- *	This symbol, if defined, indicates to the C program that it could
- *	include <assert.h> to get the assert() macro.
- */
-#define	I_ASSERT		/**/
-
 /* I_DBM:
  *	This symbol, if defined, indicates that <dbm.h> exists and should
  *	be included.
@@ -652,26 +619,6 @@
 /*#define I_DBM	/**/
 #define I_RPCSVC_DBM	/**/
 
-/* I_DIRENT:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <dirent.h>. Using this symbol also triggers the definition
- *	of the Direntry_t define which ends up being 'struct dirent' or
- *	'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- *	This symbol, if defined, indicates to the C program that the length
- *	of directory entry names is provided by a d_namlen field.  Otherwise
- *	you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- *	This symbol is set to 'struct direct' or 'struct dirent' depending on
- *	whether dirent is available or not. You should use this pseudo type to
- *	portably declare your directory entries.
- */
-#define I_DIRENT		/**/
-#define DIRNAMLEN	/**/
-#define Direntry_t struct direct
-
 /* I_DLFCN:
  *	This symbol, if defined, indicates that <dlfcn.h> exists and should
  *	be included.
@@ -690,6 +637,12 @@
  */
 #define I_FLOAT		/**/
 
+/* I_GDBM:
+ *	This symbol, if defined, indicates that <gdbm.h> exists and should
+ *	be included.
+ */
+/*#define I_GDBM	/**/
+
 /* I_LIMITS:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <limits.h> to get definition of symbols like WORD_BIT or
@@ -715,12 +668,6 @@
  */
 /*#define I_MEMORY		/**/
 
-/* I_NET_ERRNO:
- *	This symbol, if defined, indicates that <net/errno.h> exists and 
- *	should be included.
- */
-/*#define I_NET_ERRNO		/**/
-
 /* I_NETINET_IN:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
@@ -874,40 +821,50 @@
  */
 /*#define I_VFORK	/**/
 
-/* HAS_ACCESSX:
- *	This symbol, if defined, indicates that the accessx routine is
- *	available to do extended access checks.
+/* INTSIZE:
+ *	This symbol contains the value of sizeof(int) so that the C
+ *	preprocessor can make decisions based on it.
  */
-/*#define HAS_ACCESSX		/**/
-
-/* HAS_EACCESS:
- *	This symbol, if defined, indicates that the eaccess routine is
- *	available to do extended access checks.
+/* LONGSIZE:
+ *	This symbol contains the value of sizeof(long) so that the C
+ *	preprocessor can make decisions based on it.
  */
-/*#define HAS_EACCESS		/**/
-
-/* I_SYS_ACCESS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <sys/access.h>.
+/* SHORTSIZE:
+ *	This symbol contains the value of sizeof(short) so that the C
+ *	preprocessor can make decisions based on it.
  */
-/*#define   I_SYS_ACCESS                /**/
+#define INTSIZE 4		/**/
+#define LONGSIZE 4		/**/
+#define SHORTSIZE 2		/**/
 
-/* I_SYS_SECURITY:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <sys/security.h>.
+/* MULTIARCH:
+ *	This symbol, if defined, signifies that the build
+ *	process will produce some binary files that are going to be
+ *	used in a cross-platform environment.  This is the case for
+ *	example with the NeXT "fat" binaries that contain executables
+ *	for several CPUs.
  */
-/*#define   I_SYS_SECURITY	/**/
+/*#define MULTIARCH		/**/
 
-/* USE_CROSS_COMPILE:
- *	This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- *	This symbol, if defined, indicates the target architecture
- *	Perl has been cross-compiled to.  Undefined if not a cross-compile.
+/* HAS_QUAD:
+ *	This symbol, if defined, tells that there's a 64-bit integer type,
+ *	Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ *	of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
  */
-#ifndef USE_CROSS_COMPILE
-/*#define	USE_CROSS_COMPILE	/**/
-#define	PERL_TARGETARCH	""	/**/
+/*#define HAS_QUAD	/**/
+#ifdef HAS_QUAD
+#   ifndef _MSC_VER
+#	define Quad_t long long	/**/
+#	define Uquad_t unsigned long long	/**/
+#   else
+#	define Quad_t __int64	/**/
+#	define Uquad_t unsigned __int64	/**/
+#   endif
+#   define QUADKIND 5	/**/
+#   define QUAD_IS_INT	1
+#   define QUAD_IS_LONG	2
+#   define QUAD_IS_LONG_LONG	3
+#   define QUAD_IS_INT64_T	4
 #endif
 
 /* OSNAME:
@@ -921,27 +878,7 @@
  *	feature tests from Configure are generally more reliable.
  */
 #define OSNAME "MSWin32"		/**/
-#define OSVERS "4.0"		/**/
-
-/* MULTIARCH:
- *	This symbol, if defined, signifies that the build
- *	process will produce some binary files that are going to be
- *	used in a cross-platform environment.  This is the case for
- *	example with the NeXT "fat" binaries that contain executables
- *	for several CPUs.
- */
-/*#define MULTIARCH		/**/
-
-/* MEM_ALIGNBYTES:
- *	This symbol contains the number of bytes required to align a
- *	double, or a long double when applicable. Usual values are 2,
- *	4 and 8. The default is eight, for safety.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-#  define MEM_ALIGNBYTES 8
-#else
-#define MEM_ALIGNBYTES 8
-#endif
+#define OSVERS "5.1"		/**/
 
 /* ARCHLIB:
  *	This variable, if defined, holds the name of the directory in
@@ -956,7 +893,7 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.11.0\\lib\\MSWin32-x86"		/**/
+#define ARCHLIB "c:\\perl\\lib"		/**/
 /*#define ARCHLIB_EXP ""	/**/
 
 /* ARCHNAME:
@@ -967,18 +904,6 @@
  */
 #define ARCHNAME "MSWin32-x86"		/**/
 
-/* HAS_ATOLF:
- *	This symbol, if defined, indicates that the atolf routine is
- *	available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF		/**/
-
-/* HAS_ATOLL:
- *	This symbol, if defined, indicates that the atoll routine is
- *	available to convert strings into long longs.
- */
-/*#define HAS_ATOLL		/**/
-
 /* BIN:
  *	This symbol holds the path of the bin directory where the package will
  *	be installed. Program must be prepared to deal with ~name substitution.
@@ -991,68 +916,9 @@
  *	This symbol, if defined, indicates that we'd like to relocate entries
  *	in @INC at run time based on the location of the perl binary.
  */
-#define BIN "c:\\perl\\5.11.0\\bin\\MSWin32-x86"	/**/
-#define BIN_EXP "c:\\perl\\5.11.0\\bin\\MSWin32-x86"	/**/
-/*#define PERL_RELOCATABLE_INC "" 		/**/
-
-/* INTSIZE:
- *	This symbol contains the value of sizeof(int) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- *	This symbol contains the value of sizeof(long) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- *	This symbol contains the value of sizeof(short) so that the C
- *	preprocessor can make decisions based on it.
- */
-#define INTSIZE 4		/**/
-#define LONGSIZE 4		/**/
-#define SHORTSIZE 2		/**/
-
-/* BYTEORDER:
- *	This symbol holds the hexadecimal constant defined in byteorder,
- *	in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
- *	If the compiler supports cross-compiling or multiple-architecture
- *	binaries (eg. on NeXT systems), use compiler-defined macros to
- *	determine the byte order.
- *	On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- *	Binaries (MAB) on either big endian or little endian machines.
- *	The endian-ness is available at compile-time.  This only matters
- *	for perl, where the config.h can be generated and installed on 
- *	one system, and used by a different architecture to build an
- *	extension.  Older versions of NeXT that might not have
- *	defined either *_ENDIAN__ were all on Motorola 680x0 series,
- *	so the default case (for NeXT) is big endian to catch them. 
- *	This might matter for NeXT 3.0.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-#  ifdef __LITTLE_ENDIAN__
-#    if LONGSIZE == 4
-#      define BYTEORDER 0x1234
-#    else
-#      if LONGSIZE == 8
-#        define BYTEORDER 0x12345678
-#      endif
-#    endif
-#  else
-#    ifdef __BIG_ENDIAN__
-#      if LONGSIZE == 4
-#        define BYTEORDER 0x4321
-#      else
-#        if LONGSIZE == 8
-#          define BYTEORDER 0x87654321
-#        endif
-#      endif
-#    endif
-#  endif
-#  if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-#    define BYTEORDER 0x4321
-#  endif
-#else
-#define BYTEORDER 0x1234	/* large digits for MSB */
-#endif /* NeXT */
+#define BIN "c:\\perl\\bin"	/**/
+#define BIN_EXP "c:\\perl\\bin"	/**/
+#define PERL_RELOCATABLE_INC "undef" 		/**/
 
 /* CAT2:
  *	This macro concatenates 2 tokens together.
@@ -1063,19 +929,16 @@
 #if 42 == 1
 #define CAT2(a,b)	a/**/b
 #define STRINGIFY(a)	"a"
-		/* If you can get stringification with catify, tell me how! */
 #endif
 #if 42 == 42
-#define PeRl_CaTiFy(a, b)	a ## b	
+#define PeRl_CaTiFy(a, b)	a ## b
 #define PeRl_StGiFy(a)	#a
-/* the additional level of indirection enables these macros to be
- * used as arguments to other macros.  See K&R 2nd ed., page 231. */
 #define CAT2(a,b)	PeRl_CaTiFy(a,b)
 #define StGiFy(a)	PeRl_StGiFy(a)
 #define STRINGIFY(a)	PeRl_StGiFy(a)
 #endif
 #if 42 != 1 && 42 != 42
-#   include "Bletch: How does this C preprocessor concatenate tokens?"
+#include "Bletch: How does this C preprocessor concatenate tokens?"
 #endif
 
 /* CPPSTDIN:
@@ -1114,12 +977,6 @@
 #endif
 #define CPPLAST ""
 
-/* HAS__FWALK:
- *	This symbol, if defined, indicates that the _fwalk system call is
- *	available to apply a function to all the file handles.
- */
-/*#define HAS__FWALK		/**/
-
 /* HAS_ACCESS:
  *	This manifest constant lets the C program know that the access()
  *	system call is available to check for accessibility using real UID/GID.
@@ -1127,11 +984,11 @@
  */
 #define HAS_ACCESS		/**/
 
-/* HAS_AINTL:
- *	This symbol, if defined, indicates that the aintl routine is
- *	available.  If copysignl is also present we can emulate modfl.
+/* HAS_ACCESSX:
+ *	This symbol, if defined, indicates that the accessx routine is
+ *	available to do extended access checks.
  */
-/*#define HAS_AINTL		/ **/
+/*#define HAS_ACCESSX		/**/
 
 /* HAS_ASCTIME_R:
  *	This symbol, if defined, indicates that the asctime_r routine
@@ -1176,99 +1033,24 @@
  */
 /*#define HASATTRIBUTE_FORMAT	/**/
 /*#define PRINTF_FORMAT_NULL_OK	/**/
+/*#define HASATTRIBUTE_NORETURN	/**/
 /*#define HASATTRIBUTE_MALLOC	/**/
 /*#define HASATTRIBUTE_NONNULL	/**/
-/*#define HASATTRIBUTE_NORETURN	/**/
 /*#define HASATTRIBUTE_PURE	/**/
 /*#define HASATTRIBUTE_UNUSED	/**/
 /*#define HASATTRIBUTE_WARN_UNUSED_RESULT	/**/
 
-/* HAS_BUILTIN_CHOOSE_EXPR:
- *	Can we handle GCC builtin for compile-time ternary-like expressions
- */
-/* HAS_BUILTIN_EXPECT:
- *	Can we handle GCC builtin for telling that certain values are more
- *	likely
- */
-/*#define HAS_BUILTIN_EXPECT    / **/
-/*#define HAS_BUILTIN_CHOOSE_EXPR /**/
-
-/* HAS_C99_VARIADIC_MACROS:
- *	If defined, the compiler supports C99 variadic macros.
- */
-/*#define HAS_C99_VARIADIC_MACROS	/**/
-
-/* CASTI32:
- *	This symbol is defined if the C compiler can cast negative
- *	or large floating point numbers to 32-bit ints.
+/* HASCONST:
+ *	This symbol, if defined, indicates that this C compiler knows about
+ *	the const type. There is no need to actually test for that symbol
+ *	within your programs. The mere use of the "const" keyword will
+ *	trigger the necessary tests.
  */
-#ifndef _MSC_VER
-#   define	CASTI32		/**/
+#define HASCONST	/**/
+#ifndef HASCONST
+#define const
 #endif
 
-/* CASTNEGFLOAT:
- *	This symbol is defined if the C compiler can cast negative
- *	numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- *	This symbol contains flags that say what difficulties the compiler
- *	has casting odd floating values to unsigned long:
- *		0 = ok
- *		1 = couldn't cast < 0
- *		2 = couldn't cast >= 0x80000000
- *		4 = couldn't cast in argument expression list
- */
-#define	CASTNEGFLOAT		/**/
-#define CASTFLAGS 0		/**/
-
-/* HAS_CLASS:
- *	This symbol, if defined, indicates that the class routine is
- *	available to classify doubles.  Available for example in AIX.
- *	The returned values are defined in <float.h> and are:
- *
- *	FP_PLUS_NORM	Positive normalized, nonzero
- *	FP_MINUS_NORM	Negative normalized, nonzero
- *	FP_PLUS_DENORM	Positive denormalized, nonzero
- *	FP_MINUS_DENORM	Negative denormalized, nonzero
- *	FP_PLUS_ZERO	+0.0
- *	FP_MINUS_ZERO	-0.0
- *	FP_PLUS_INF	+INF
- *	FP_MINUS_INF	-INF
- *	FP_NANS		Signaling Not a Number (NaNS)
- *	FP_NANQ		Quiet Not a Number (NaNQ)
- */
-/*#define HAS_CLASS		/**/
-
-/* HAS_CLEARENV:
- *	This symbol, if defined, indicates that the clearenv () routine is
- *	available for use.
- */
-/*#define HAS_CLEARENV		/**/
-
-/* VOID_CLOSEDIR:
- *	This symbol, if defined, indicates that the closedir() routine
- *	does not return a value.
- */
-/*#define VOID_CLOSEDIR		/**/
-
-/* HAS_STRUCT_CMSGHDR:
- *	This symbol, if defined, indicates that the struct cmsghdr
- *	is supported.
- */
-/*#define HAS_STRUCT_CMSGHDR	/**/
-
-/* HAS_COPYSIGNL:
- *	This symbol, if defined, indicates that the copysignl routine is
- *	available.  If aintl is also present we can emulate modfl.
- */
-/*#define HAS_COPYSIGNL		/**/
-
-/* USE_CPLUSPLUS:
- *	This symbol, if defined, indicates that a C++ compiler was
- *	used to compiled Perl and will be used to compile extensions.
- */
-/*#define USE_CPLUSPLUS		/**/
-
 /* HAS_CRYPT:
  *	This symbol, if defined, indicates that the crypt routine is available
  *	to encrypt passwords and the like.
@@ -1325,28 +1107,6 @@
 /*#define HAS_CTIME_R	   /**/
 #define CTIME_R_PROTO 0	   /**/
 
-/* HAS_DBMINIT_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the dbminit() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int dbminit(char *);
- */
-/*#define	HAS_DBMINIT_PROTO	/**/
-
-/* HAS_DIRFD:
- *	This manifest constant lets the C program know that dirfd
- *	is available.
- */
-/*#define HAS_DIRFD		/**/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- *	This symbol, if defined, indicates that we need to prepend an
- *	underscore to the symbol name before calling dlsym().  This only
- *	makes sense if you *have* dlsym, which we will presume is the
- *	case if you're using dl_dlopen.xs.
- */
-/*#define 	DLSYM_NEEDS_UNDERSCORE 	/**/
-
 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
  *	This symbol, if defined, indicates that the bug that prevents
  *	setuid scripts from being secure is not present in this kernel.
@@ -1388,6 +1148,12 @@
  */
 /*#define	HAS_DRAND48_PROTO	/**/
 
+/* HAS_EACCESS:
+ *	This symbol, if defined, indicates that the eaccess routine is
+ *	available to do extended access checks.
+ */
+/*#define HAS_EACCESS		/**/
+
 /* HAS_ENDGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for finalizing sequential access of the group database.
@@ -1502,210 +1268,12 @@
 /*#define HAS_ENDSERVENT_R	   /**/
 #define ENDSERVENT_R_PROTO 0	   /**/
 
-/* HAS_FAST_STDIO:
- *	This symbol, if defined, indicates that the "fast stdio"
- *	is available to manipulate the stdio buffers directly.
- */
-#define HAS_FAST_STDIO		/**/
-
-/* HAS_FCHDIR:
- *	This symbol, if defined, indicates that the fchdir routine is
- *	available to change directory using a file descriptor.
- */
-/*#define HAS_FCHDIR		/**/
-
-/* FCNTL_CAN_LOCK:
- *	This symbol, if defined, indicates that fcntl() can be used
- *	for file locking.  Normally on Unix systems this is defined.
- *	It may be undefined on VMS.
- */
-/*#define FCNTL_CAN_LOCK		/**/
-
-/* HAS_FD_SET:
- *	This symbol, when defined, indicates presence of the fd_set typedef
- *	in <sys/types.h>
- */
-#define HAS_FD_SET	/**/
-
-/* HAS_FINITE:
- *	This symbol, if defined, indicates that the finite routine is
- *	available to check whether a double is finite (non-infinity non-NaN).
- */
-/*#define HAS_FINITE		/**/
-
-/* HAS_FINITEL:
- *	This symbol, if defined, indicates that the finitel routine is
- *	available to check whether a long double is finite
- *	(non-infinity non-NaN).
- */
-/*#define HAS_FINITEL		/**/
-
 /* FLEXFILENAMES:
  *	This symbol, if defined, indicates that the system supports filenames
  *	longer than 14 characters.
  */
 #define	FLEXFILENAMES		/**/
 
-/* HAS_FLOCK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the flock() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int flock(int, int);
- */
-#define	HAS_FLOCK_PROTO	/**/
-
-/* HAS_FP_CLASS:
- *	This symbol, if defined, indicates that the fp_class routine is
- *	available to classify doubles.  Available for example in Digital UNIX.
- *	The returned values are defined in <math.h> and are:
- *
- *	FP_SNAN           Signaling NaN (Not-a-Number)
- *	FP_QNAN           Quiet NaN (Not-a-Number)
- *	FP_POS_INF        +infinity
- *	FP_NEG_INF        -infinity
- *	FP_POS_NORM       Positive normalized
- *	FP_NEG_NORM       Negative normalized
- *	FP_POS_DENORM     Positive denormalized
- *	FP_NEG_DENORM     Negative denormalized
- *	FP_POS_ZERO       +0.0 (positive zero)
- *	FP_NEG_ZERO       -0.0 (negative zero)
- */
-/*#define HAS_FP_CLASS		/**/
-
-/* HAS_FPCLASS:
- *	This symbol, if defined, indicates that the fpclass routine is
- *	available to classify doubles.  Available for example in Solaris/SVR4.
- *	The returned values are defined in <ieeefp.h> and are:
- *
- *	FP_SNAN		signaling NaN
- *	FP_QNAN		quiet NaN
- *	FP_NINF		negative infinity
- *	FP_PINF		positive infinity
- *	FP_NDENORM	negative denormalized non-zero
- *	FP_PDENORM	positive denormalized non-zero
- *	FP_NZERO	negative zero
- *	FP_PZERO	positive zero
- *	FP_NNORM	negative normalized non-zero
- *	FP_PNORM	positive normalized non-zero
- */
-/*#define HAS_FPCLASS		/**/
-
-/* HAS_FPCLASSIFY:
- *	This symbol, if defined, indicates that the fpclassify routine is
- *	available to classify doubles.  Available for example in HP-UX.
- *	The returned values are defined in <math.h> and are
- *
- *           FP_NORMAL     Normalized
- *           FP_ZERO       Zero
- *           FP_INFINITE   Infinity
- *           FP_SUBNORMAL  Denormalized
- *           FP_NAN        NaN
- *
- */
-/*#define HAS_FPCLASSIFY		/**/
-
-/* HAS_FPCLASSL:
- *	This symbol, if defined, indicates that the fpclassl routine is
- *	available to classify long doubles.  Available for example in IRIX.
- *	The returned values are defined in <ieeefp.h> and are:
- *
- *	FP_SNAN		signaling NaN
- *	FP_QNAN		quiet NaN
- *	FP_NINF		negative infinity
- *	FP_PINF		positive infinity
- *	FP_NDENORM	negative denormalized non-zero
- *	FP_PDENORM	positive denormalized non-zero
- *	FP_NZERO	negative zero
- *	FP_PZERO	positive zero
- *	FP_NNORM	negative normalized non-zero
- *	FP_PNORM	positive normalized non-zero
- */
-/*#define HAS_FPCLASSL		/**/
-
-/* HAS_FPOS64_T:
- *	This symbol will be defined if the C compiler supports fpos64_t.
- */
-/*#define	HAS_FPOS64_T    	/**/
-
-/* HAS_FREXPL:
- *	This symbol, if defined, indicates that the frexpl routine is
- *	available to break a long double floating-point number into
- *	a normalized fraction and an integral power of 2.
- */
-/*#define HAS_FREXPL		/**/
-
-/* HAS_STRUCT_FS_DATA:
- *	This symbol, if defined, indicates that the struct fs_data
- *	to do statfs() is supported.
- */
-/*#define HAS_STRUCT_FS_DATA	/**/
-
-/* HAS_FSEEKO:
- *	This symbol, if defined, indicates that the fseeko routine is
- *	available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FSEEKO		/**/
-
-/* HAS_FSTATFS:
- *	This symbol, if defined, indicates that the fstatfs routine is
- *	available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATFS		/**/
-
-/* HAS_FSYNC:
- *	This symbol, if defined, indicates that the fsync routine is
- *	available to write a file's modified data and attributes to
- *	permanent storage.
- */
-/*#define HAS_FSYNC		/**/
-
-/* HAS_FTELLO:
- *	This symbol, if defined, indicates that the ftello routine is
- *	available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FTELLO		/**/
-
-/* HAS_FUTIMES:
- *	This symbol, if defined, indicates that the futimes routine is
- *	available to change file descriptor time stamps with struct timevals.
- */
-/*#define HAS_FUTIMES		/**/
-
-/* Gconvert:
- *	This preprocessor macro is defined to convert a floating point
- *	number to a string without a trailing decimal point.  This
- *	emulates the behavior of sprintf("%g"), but is sometimes much more
- *	efficient.  If gconvert() is not available, but gcvt() drops the
- *	trailing decimal point, then gcvt() is used.  If all else fails,
- *	a macro using sprintf("%g") is used. Arguments for the Gconvert
- *	macro are: value, number of digits, whether trailing zeros should
- *	be retained, and the output buffer.
- *	The usual values are:
- *		d_Gconvert='gconvert((x),(n),(t),(b))'
- *		d_Gconvert='gcvt((x),(n),(b))'
- *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- *	The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GETCWD:
- *	This symbol, if defined, indicates that the getcwd routine is
- *	available to get the current working directory.
- */
-#define HAS_GETCWD		/**/
-
-/* HAS_GETESPWNAM:
- *	This symbol, if defined, indicates that the getespwnam system call is
- *	available to retrieve enchanced (shadow) password entries by name.
- */
-/*#define HAS_GETESPWNAM		/**/
-
-/* HAS_GETFSSTAT:
- *	This symbol, if defined, indicates that the getfsstat routine is
- *	available to stat filesystems in bulk.
- */
-/*#define HAS_GETFSSTAT		/**/
-
 /* HAS_GETGRENT:
  *	This symbol, if defined, indicates that the getgrent routine is
  *	available for sequential access of the group database.
@@ -1845,12 +1413,6 @@
  */
 #define	HAS_GETHOST_PROTOS	/**/
 
-/* HAS_GETITIMER:
- *	This symbol, if defined, indicates that the getitimer routine is
- *	available to return interval timers.
- */
-/*#define HAS_GETITIMER		/**/
-
 /* HAS_GETLOGIN_R:
  *	This symbol, if defined, indicates that the getlogin_r routine
  *	is available to getlogin re-entrantly.
@@ -1864,18 +1426,6 @@
 /*#define HAS_GETLOGIN_R	   /**/
 #define GETLOGIN_R_PROTO 0	   /**/
 
-/* HAS_GETMNT:
- *	This symbol, if defined, indicates that the getmnt routine is
- *	available to get filesystem mount info by filename.
- */
-/*#define HAS_GETMNT		/**/
-
-/* HAS_GETMNTENT:
- *	This symbol, if defined, indicates that the getmntent routine is
- *	available to iterate through mounted file systems to get their info.
- */
-/*#define HAS_GETMNTENT		/**/
-
 /* HAS_GETNETBYADDR:
  *	This symbol, if defined, indicates that the getnetbyaddr() routine is
  *	available to look up networks by their IP addresses.
@@ -1941,13 +1491,6 @@
  */
 /*#define	HAS_GETNET_PROTOS	/**/
 
-/* HAS_GETPAGESIZE:
- *	This symbol, if defined, indicates that the getpagesize system call
- *	is available to get system page size, which is the granularity of
- *	many memory management calls.
- */
-/*#define HAS_GETPAGESIZE		/**/
-
 /* HAS_GETPROTOENT:
  *	This symbol, if defined, indicates that the getprotoent() routine is
  *	available to look up protocols in some data base or another.
@@ -2023,12 +1566,6 @@
  */
 #define	HAS_GETPROTO_PROTOS	/**/
 
-/* HAS_GETPRPWNAM:
- *	This symbol, if defined, indicates that the getprpwnam system call is
- *	available to retrieve protected (shadow) password entries by name.
- */
-/*#define HAS_GETPRPWNAM		/**/
-
 /* HAS_GETPWENT:
  *	This symbol, if defined, indicates that the getpwent routine is
  *	available for sequential access of the passwd database.
@@ -2128,12 +1665,6 @@
  */
 #define	HAS_GETSERV_PROTOS	/**/
 
-/* HAS_GETSPNAM:
- *	This symbol, if defined, indicates that the getspnam system call is
- *	available to retrieve SysV shadow password entries by name.
- */
-/*#define HAS_GETSPNAM		/**/
-
 /* HAS_GETSPNAM_R:
  *	This symbol, if defined, indicates that the getspnam_r routine
  *	is available to getspnam re-entrantly.
@@ -2171,21 +1702,6 @@
 /*#define HAS_GMTIME_R	   /**/
 #define GMTIME_R_PROTO 0	   /**/
 
-/* HAS_GNULIBC:
- *	This symbol, if defined, indicates to the C program that 
- *	the GNU C library is being used.  A better check is to use
- *	the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
- */
-/*#define HAS_GNULIBC  	/**/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-#   define _GNU_SOURCE
-#endif
-/* HAS_HASMNTOPT:
- *	This symbol, if defined, indicates that the hasmntopt routine is
- *	available to query the mount options of file systems.
- */
-/*#define HAS_HASMNTOPT		/**/
-
 /* HAS_HTONL:
  *	This symbol, if defined, indicates that the htonl() routine (and
  *	friends htons() ntohl() ntohs()) are available to do network
@@ -2211,70 +1727,6 @@
 #define HAS_NTOHL		/**/
 #define HAS_NTOHS		/**/
 
-/* HAS_ILOGBL:
- *	This symbol, if defined, indicates that the ilogbl routine is
- *	available.  If scalbnl is also present we can emulate frexpl.
- */
-/*#define HAS_ILOGBL		/**/
-
-/* HAS_INT64_T:
- *     This symbol will defined if the C compiler supports int64_t.
- *     Usually the <inttypes.h> needs to be included, but sometimes
- *	<sys/types.h> is enough.
- */
-/*#define     HAS_INT64_T               /**/
-
-/* HAS_ISASCII:
- *	This manifest constant lets the C program know that isascii 
- *	is available.
- */
-#define HAS_ISASCII		/**/
-
-/* HAS_ISFINITE:
- *	This symbol, if defined, indicates that the isfinite routine is
- *	available to check whether a double is finite (non-infinity non-NaN).
- */
-/*#define HAS_ISFINITE		/**/
-
-/* HAS_ISINF:
- *	This symbol, if defined, indicates that the isinf routine is
- *	available to check whether a double is an infinity.
- */
-/*#define HAS_ISINF		/**/
-
-/* HAS_ISNAN:
- *	This symbol, if defined, indicates that the isnan routine is
- *	available to check whether a double is a NaN.
- */
-#define HAS_ISNAN		/**/
-
-/* HAS_ISNANL:
- *	This symbol, if defined, indicates that the isnanl routine is
- *	available to check whether a long double is a NaN.
- */
-/*#define HAS_ISNANL		/**/
-
-/* HAS_LCHOWN:
- *	This symbol, if defined, indicates that the lchown routine is
- *	available to operate on a symbolic link (instead of following the
- *	link).
- */
-/*#define HAS_LCHOWN		/**/
-
-/* HAS_LDBL_DIG:
- *	This symbol, if defined, indicates that this system's <float.h>
- *	or <limits.h> defines the symbol LDBL_DIG, which is the number
- *	of significant digits in a long double precision number. Unlike
- *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#define HAS_LDBL_DIG 	/**/
-
-/* LIBM_LIB_VERSION:
- *	This symbol, if defined, indicates that libm exports _LIB_VERSION
- *	and that math.h defines the enum to manipulate it.
- */
-/*#define LIBM_LIB_VERSION         /**/
-
 /* HAS_LOCALTIME_R:
  *	This symbol, if defined, indicates that the localtime_r routine
  *	is available to localtime re-entrantly.
@@ -2282,9 +1734,16 @@
 /* LOCALTIME_R_NEEDS_TZSET:
  *	Many libc's localtime_r implementations do not call tzset,
  *	making them differ from localtime(), and making timezone
- *	changes using $ENV{TZ} without explicitly calling tzset
+ *	changes using \undef{TZ} without explicitly calling tzset
  *	impossible. This symbol makes us call tzset before localtime_r
  */
+/*#define LOCALTIME_R_NEEDS_TZSET /**/
+#ifdef LOCALTIME_R_NEEDS_TZSET
+#define L_R_TZSET tzset(),
+#else
+#define L_R_TZSET
+#endif
+
 /* LOCALTIME_R_PROTO:
  *	This symbol encodes the prototype of localtime_r.
  *	It is zero if d_localtime_r is undef, and one of the
@@ -2292,7 +1751,6 @@
  *	is defined.
  */
 /*#define HAS_LOCALTIME_R	   /**/
-/*#define LOCALTIME_R_NEEDS_TZSET	   /**/
 #define LOCALTIME_R_PROTO 0	   /**/
 
 /* HAS_LONG_DOUBLE:
@@ -2300,7 +1758,7 @@
  *	doubles.
  */
 /* LONG_DOUBLESIZE:
- *	This symbol contains the size of a long double, so that the 
+ *	This symbol contains the size of a long double, so that the
  *	C preprocessor can make decisions based on it.  It is only
  *	defined if the system supports long doubles.
  */
@@ -2317,7 +1775,7 @@
  *	This symbol will be defined if the C compiler supports long long.
  */
 /* LONGLONGSIZE:
- *	This symbol contains the size of a long long, so that the 
+ *	This symbol contains the size of a long long, so that the
  *	C preprocessor can make decisions based on it.  It is only
  *	defined if the system supports long long.
  */
@@ -2334,36 +1792,12 @@
  */
 #define	HAS_LSEEK_PROTO	/**/
 
-/* HAS_MADVISE:
- *	This symbol, if defined, indicates that the madvise system call is
- *	available to map a file into memory.
- */
-/*#define HAS_MADVISE		/**/
-
-/* HAS_MALLOC_SIZE:
- *	This symbol, if defined, indicates that the malloc_size
- *	routine is available for use.
- */
-/*#define HAS_MALLOC_SIZE		/**/
-
-/* HAS_MALLOC_GOOD_SIZE:
- *	This symbol, if defined, indicates that the malloc_good_size
- *	routine is available for use.
- */
-/*#define HAS_MALLOC_GOOD_SIZE	/**/
-
 /* HAS_MEMCHR:
  *	This symbol, if defined, indicates that the memchr routine is available
  *	to locate characters within a C string.
  */
 #define HAS_MEMCHR	/**/
 
-/* HAS_MKDTEMP:
- *	This symbol, if defined, indicates that the mkdtemp routine is
- *	available to exclusively create a uniquely named temporary directory.
- */
-/*#define HAS_MKDTEMP		/**/
-
 /* HAS_MKSTEMP:
  *	This symbol, if defined, indicates that the mkstemp routine is
  *	available to exclusively create and open a uniquely named
@@ -2371,13 +1805,6 @@
  */
 /*#define HAS_MKSTEMP		/**/
 
-/* HAS_MKSTEMPS:
- *	This symbol, if defined, indicates that the mkstemps routine is
- *	available to excluslvely create and open a uniquely named
- *	(with a suffix) temporary file.
- */
-/*#define HAS_MKSTEMPS		/**/
-
 /* HAS_MMAP:
  *	This symbol, if defined, indicates that the mmap system call is
  *	available to map a file into memory.
@@ -2390,76 +1817,18 @@
 /*#define HAS_MMAP		/**/
 #define Mmap_t void *	/**/
 
-/* HAS_MODFL:
- *	This symbol, if defined, indicates that the modfl routine is
- *	available to split a long double x into a fractional part f and
- *	an integer part i such that |f| < 1.0 and (f + i) = x.
- */
-/* HAS_MODFL_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the modfl() function.  Otherwise, it is up
- *	to the program to supply one.
- */
-/* HAS_MODFL_POW32_BUG:
- *	This symbol, if defined, indicates that the modfl routine is
- *	broken for long doubles >= pow(2, 32).
- *	For example from 4294967303.150000 one would get 4294967302.000000
- *	and 1.150000.  The bug has been seen in certain versions of glibc,
- *	release 2.2.2 is known to be okay.
- */
-/*#define HAS_MODFL		/**/
-/*#define HAS_MODFL_PROTO		/**/
-/*#define HAS_MODFL_POW32_BUG		/**/
-
-/* HAS_MPROTECT:
- *	This symbol, if defined, indicates that the mprotect system call is
- *	available to modify the access protection of a memory mapped file.
- */
-/*#define HAS_MPROTECT		/**/
-
 /* HAS_MSG:
  *	This symbol, if defined, indicates that the entire msg*(2) library is
  *	supported (IPC mechanism based on message queues).
  */
 /*#define HAS_MSG		/**/
 
-/* HAS_STRUCT_MSGHDR:
- *	This symbol, if defined, indicates that the struct msghdr
- *	is supported.
- */
-/*#define HAS_STRUCT_MSGHDR	/**/
-
-/* HAS_NL_LANGINFO:
- *	This symbol, if defined, indicates that the nl_langinfo routine is
- *	available to return local data.  You will also need <langinfo.h>
- *	and therefore I_LANGINFO.
- */
-/*#define HAS_NL_LANGINFO		/**/
-
-/* HAS_OFF64_T:
- *	This symbol will be defined if the C compiler supports off64_t.
- */
-/*#define	HAS_OFF64_T    		/**/
-
-/* HAS_OPEN3:
- *	This manifest constant lets the C program know that the three
- *	argument form of open(2) is available.
- */
-/*#define HAS_OPEN3		/**/
-
-/* HAS_PROCSELFEXE:
- *	This symbol is defined if PROCSELFEXE_PATH is a symlink
- *	to the absolute pathname of the executing program.
- */
-/* PROCSELFEXE_PATH:
- *	If HAS_PROCSELFEXE is defined this symbol is the filename
- *	of the symbolic link pointing to the absolute pathname of
- *	the executing program.
+/* HAS_POLL:
+ *	This symbol, if defined, indicates that the poll routine is
+ *	available to poll active file descriptors.  Please check I_POLL and
+ *	I_SYS_POLL to know which header should be included as well.
  */
-/*#define HAS_PROCSELFEXE	/**/
-#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
-#define PROCSELFEXE_PATH		/**/
-#endif
+/*#define HAS_POLL		/**/
 
 /* OLD_PTHREAD_CREATE_JOINABLE:
  *	This symbol, if defined, indicates how to create pthread
@@ -2477,15 +1846,8 @@
  */
 /*#define HAS_PTHREAD_ATFORK		/**/
 
-/* HAS_PTHREAD_ATTR_SETSCOPE:
- *	This symbol, if defined, indicates that the pthread_attr_setscope
- *	system call is available to set the contention scope attribute of
- *	a thread attribute object.
- */
-/*#define HAS_PTHREAD_ATTR_SETSCOPE		/ **/
-
 /* HAS_PTHREAD_YIELD:
- *	This symbol, if defined, indicates that the pthread_yield 
+ *	This symbol, if defined, indicates that the pthread_yield
  *	routine is available to yield the execution of the current
  *	thread.	 sched_yield is preferable to pthread_yield.
  */
@@ -2542,69 +1904,12 @@
 /*#define HAS_READDIR_R	   /**/
 #define READDIR_R_PROTO 0	   /**/
 
-/* HAS_READV:
- *	This symbol, if defined, indicates that the readv routine is
- *	available to do gather reads.  You will also need <sys/uio.h>
- *	and there I_SYSUIO.
- */
-/*#define HAS_READV		/**/
-
-/* HAS_RECVMSG:
- *	This symbol, if defined, indicates that the recvmsg routine is
- *	available to send structured socket messages.
- */
-/*#define HAS_RECVMSG		/**/
-
-/* HAS_SAFE_BCOPY:
- *	This symbol, if defined, indicates that the bcopy routine is available
- *	to copy potentially overlapping memory blocks. Normally, you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-/*#define HAS_SAFE_BCOPY	/**/
-
-/* HAS_SAFE_MEMCPY:
- *	This symbol, if defined, indicates that the memcpy routine is available
- *	to copy potentially overlapping memory blocks.  If you need to
- *	copy overlapping memory blocks, you should check HAS_MEMMOVE and
- *	use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY	/**/
-
-/* HAS_SANE_MEMCMP:
- *	This symbol, if defined, indicates that the memcmp routine is available
- *	and can be used to compare relative magnitudes of chars with their high
- *	bits set.  If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP	/**/
-
-/* HAS_SBRK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the sbrk() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern void* sbrk(int);
- *		extern void* sbrk(size_t);
- */
-/*#define	HAS_SBRK_PROTO	/**/
-
-/* HAS_SCALBNL:
- *	This symbol, if defined, indicates that the scalbnl routine is
- *	available.  If ilogbl is also present we can emulate frexpl.
- */
-/*#define HAS_SCALBNL		/**/
-
 /* HAS_SEM:
  *	This symbol, if defined, indicates that the entire sem*(2) library is
  *	supported.
  */
 /*#define HAS_SEM		/**/
 
-/* HAS_SENDMSG:
- *	This symbol, if defined, indicates that the sendmsg routine is
- *	available to send structured socket messages.
- */
-/*#define HAS_SENDMSG		/**/
-
 /* HAS_SETGRENT:
  *	This symbol, if defined, indicates that the setgrent routine is
  *	available for initializing sequential access of the group database.
@@ -2650,12 +1955,6 @@
 /*#define HAS_SETHOSTENT_R	   /**/
 #define SETHOSTENT_R_PROTO 0	   /**/
 
-/* HAS_SETITIMER:
- *	This symbol, if defined, indicates that the setitimer routine is
- *	available to set interval timers.
- */
-/*#define HAS_SETITIMER		/**/
-
 /* HAS_SETLOCALE_R:
  *	This symbol, if defined, indicates that the setlocale_r routine
  *	is available to setlocale re-entrantly.
@@ -2706,12 +2005,6 @@
 /*#define HAS_SETPGRP		/**/
 /*#define USE_BSD_SETPGRP	/**/
 
-/* HAS_SETPROCTITLE:
- *	This symbol, if defined, indicates that the setproctitle routine is
- *	available to set process title.
- */
-/*#define HAS_SETPROCTITLE		/**/
-
 /* HAS_SETPROTOENT_R:
  *	This symbol, if defined, indicates that the setprotoent_r routine
  *	is available to setprotoent re-entrantly.
@@ -2770,12 +2063,6 @@
  */
 #define HAS_SETVBUF		/**/
 
-/* USE_SFIO:
- *	This symbol, if defined, indicates that sfio should
- *	be used.
- */
-/*#define	USE_SFIO		/**/
-
 /* HAS_SHM:
  *	This symbol, if defined, indicates that the entire shm*(2) library is
  *	supported.
@@ -2796,81 +2083,6 @@
 #define Shmat_t void *	/**/
 /*#define HAS_SHMAT_PROTOTYPE	/**/
 
-/* HAS_SIGACTION:
- *	This symbol, if defined, indicates that Vr4's sigaction() routine
- *	is available.
- */
-/*#define HAS_SIGACTION	/**/
-
-/* HAS_SIGPROCMASK:
- *	This symbol, if defined, indicates that the sigprocmask
- *	system call is available to examine or change the signal mask
- *	of the calling process.
- */
-/*#define HAS_SIGPROCMASK		/**/
-
-/* HAS_SIGSETJMP:
- *	This variable indicates to the C program that the sigsetjmp()
- *	routine is available to save the calling process's registers
- *	and stack environment for later use by siglongjmp(), and
- *	to optionally save the process's signal mask.  See
- *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- *	This macro is used in the same way as sigsetjmp(), but will invoke
- *	traditional setjmp() if sigsetjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- *	This macro is used in the same way as siglongjmp(), but will invoke
- *	traditional longjmp() if siglongjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP	/**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_SITECUSTOMIZE:
- *	This symbol, if defined, indicates that sitecustomize should
- *	be used.
- */
-/*#define	USE_SITECUSTOMIZE		/**/
-
-/* HAS_SNPRINTF:
- *	This symbol, if defined, indicates that the snprintf () library
- *	function is available for use.
- */
-/* HAS_VSNPRINTF:
- *	This symbol, if defined, indicates that the vsnprintf () library
- *	function is available for use.
- */
-#define HAS_SNPRINTF	/**/
-#define HAS_VSNPRINTF	/**/
-
-/* HAS_SOCKATMARK:
- *	This symbol, if defined, indicates that the sockatmark routine is
- *	available to test whether a socket is at the out-of-band mark.
- */
-/*#define HAS_SOCKATMARK		/**/
-
-/* HAS_SOCKATMARK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the sockatmark() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int sockatmark(int);
- */
-/*#define	HAS_SOCKATMARK_PROTO	/**/
-
 /* HAS_SOCKET:
  *	This symbol, if defined, indicates that the BSD socket interface is
  *	supported.
@@ -2918,26 +2130,6 @@
 /*#define	HAS_MSG_PROXY	/**/
 /*#define	HAS_SCM_RIGHTS	/**/
 
-/* HAS_SOCKS5_INIT:
- *	This symbol, if defined, indicates that the socks5_init routine is
- *	available to initialize SOCKS 5.
- */
-/*#define HAS_SOCKS5_INIT		/**/
-
-/* SPRINTF_RETURNS_STRLEN:
- *	This variable defines whether sprintf returns the length of the string
- *	(as per the ANSI spec). Some C libraries retain compatibility with
- *	pre-ANSI C and return a pointer to the passed in buffer; for these
- *	this variable will be undef.
- */
-#define SPRINTF_RETURNS_STRLEN       /**/
-
-/* HAS_SQRTL:
- *	This symbol, if defined, indicates that the sqrtl routine is
- *	available to do long double square roots.
- */
-/*#define HAS_SQRTL		/**/
-
 /* HAS_SRAND48_R:
  *	This symbol, if defined, indicates that the srand48_r routine
  *	is available to srand48 re-entrantly.
@@ -2964,22 +2156,6 @@
 /*#define HAS_SRANDOM_R	   /**/
 #define SRANDOM_R_PROTO 0	   /**/
 
-/* HAS_SETRESGID_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the setresgid() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
- */
-/*#define	HAS_SETRESGID_PROTO	/**/
-
-/* HAS_SETRESUID_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the setresuid() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
- */
-/*#define	HAS_SETRESUID_PROTO	/**/
-
 /* USE_STAT_BLOCKS:
  *	This symbol is defined if this system has a stat structure declaring
  *	st_blksize and st_blocks.
@@ -2988,28 +2164,894 @@
 /*#define USE_STAT_BLOCKS 	/**/
 #endif
 
-/* HAS_STRUCT_STATFS_F_FLAGS:
- *	This symbol, if defined, indicates that the struct statfs
- *	does have the f_flags member containing the mount flags of
- *	the filesystem containing the file.
- *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
- *	have statfs() and struct statfs, they have ustat() and getmnt()
- *	with struct ustat and struct fs_data.
+/* USE_STRUCT_COPY:
+ *	This symbol, if defined, indicates that this C compiler knows how
+ *	to copy structures.  If undefined, you'll need to use a block copy
+ *	routine of some sort instead.
  */
-/*#define HAS_STRUCT_STATFS_F_FLAGS		/**/
+#define	USE_STRUCT_COPY	/**/
 
-/* HAS_STRUCT_STATFS:
- *	This symbol, if defined, indicates that the struct statfs
- *	to do statfs() is supported.
+/* HAS_STRERROR:
+ *	This symbol, if defined, indicates that the strerror routine is
+ *	available to translate error numbers to strings. See the writeup
+ *	of Strerror() in this file before you try to define your own.
  */
-/*#define HAS_STRUCT_STATFS	/**/
+/* HAS_SYS_ERRLIST:
+ *	This symbol, if defined, indicates that the sys_errlist array is
+ *	available to translate error numbers to strings. The extern int
+ *	sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ *	This preprocessor symbol is defined as a macro if strerror() is
+ *	not available to translate error numbers to strings but sys_errlist[]
+ *	array is there.
+ */
+#define HAS_STRERROR		/**/
+#define HAS_SYS_ERRLIST	/**/
+#define Strerror(e) strerror(e)
 
-/* HAS_FSTATVFS:
- *	This symbol, if defined, indicates that the fstatvfs routine is
- *	available to stat filesystems by file descriptors.
+/* HAS_STRERROR_R:
+ *	This symbol, if defined, indicates that the strerror_r routine
+ *	is available to strerror re-entrantly.
  */
-/*#define HAS_FSTATVFS		/**/
+/* STRERROR_R_PROTO:
+ *	This symbol encodes the prototype of strerror_r.
+ *	It is zero if d_strerror_r is undef, and one of the
+ *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
+ *	is defined.
+ */
+/*#define HAS_STRERROR_R	   /**/
+#define STRERROR_R_PROTO 0	   /**/
+
+/* HAS_STRTOUL:
+ *	This symbol, if defined, indicates that the strtoul routine is
+ *	available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL	/**/
+
+/* HAS_TIME:
+ *	This symbol, if defined, indicates that the time() routine exists.
+ */
+/* Time_t:
+ *	This symbol holds the type returned by time(). It can be long,
+ *	or time_t on BSD sites (in which case <sys/types.h> should be
+ *	included).
+ */
+#define HAS_TIME		/**/
+#define Time_t time_t		/* Time type */
+
+/* HAS_TIMES:
+ *	This symbol, if defined, indicates that the times() routine exists.
+ *	Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES		/**/
+
+/* HAS_TMPNAM_R:
+ *	This symbol, if defined, indicates that the tmpnam_r routine
+ *	is available to tmpnam re-entrantly.
+ */
+/* TMPNAM_R_PROTO:
+ *	This symbol encodes the prototype of tmpnam_r.
+ *	It is zero if d_tmpnam_r is undef, and one of the
+ *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
+ *	is defined.
+ */
+/*#define HAS_TMPNAM_R	   /**/
+#define TMPNAM_R_PROTO 0	   /**/
+
+/* HAS_TTYNAME_R:
+ *	This symbol, if defined, indicates that the ttyname_r routine
+ *	is available to ttyname re-entrantly.
+ */
+/* TTYNAME_R_PROTO:
+ *	This symbol encodes the prototype of ttyname_r.
+ *	It is zero if d_ttyname_r is undef, and one of the
+ *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
+ *	is defined.
+ */
+/*#define HAS_TTYNAME_R	   /**/
+#define TTYNAME_R_PROTO 0	   /**/
+
+/* HAS_UNION_SEMUN:
+ *	This symbol, if defined, indicates that the union semun is
+ *	defined by including <sys/sem.h>.  If not, the user code
+ *	probably needs to define it as:
+ *	union semun {
+ *	    int val;
+ *	    struct semid_ds *buf;
+ *	    unsigned short *array;
+ *	}
+ */
+/* USE_SEMCTL_SEMUN:
+ *	This symbol, if defined, indicates that union semun is
+ *	used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ *	This symbol, if defined, indicates that struct semid_ds * is
+ *	used for semctl IPC_STAT.
+ */
+#define HAS_UNION_SEMUN	/**/
+/*#define USE_SEMCTL_SEMUN	/**/
+/*#define USE_SEMCTL_SEMID_DS	/**/
+
+/* HAS_VFORK:
+ *	This symbol, if defined, indicates that vfork() exists.
+ */
+/*#define HAS_VFORK	/**/
+
+/* HAS_PSEUDOFORK:
+ *	This symbol, if defined, indicates that an emulation of the
+ *	fork routine is available.
+ */
+/*#define HAS_PSEUDOFORK	/**/
+
+/* Signal_t:
+ *	This symbol's value is either "void" or "int", corresponding to the
+ *	appropriate return type of a signal handler.  Thus, you can declare
+ *	a signal handler using "Signal_t (*handler)()", and define the
+ *	handler using "Signal_t handler(sig)".
+ */
+#define Signal_t void	/* Signal handler's return type */
+
+/* HASVOLATILE:
+ *	This symbol, if defined, indicates that this C compiler knows about
+ *	the volatile declaration.
+ */
+#define	HASVOLATILE	/**/
+#ifndef HASVOLATILE
+#define volatile
+#endif
+
+/* Fpos_t:
+ *	This symbol holds the type used to declare file positions in libc.
+ *	It can be fpos_t, long, uint, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t		/* File position type */
+
+/* Gid_t_f:
+ *	This symbol defines the format string used for printing a Gid_t.
+ */
+#define	Gid_t_f		"ld"		/**/
+
+/* Gid_t_sign:
+ *	This symbol holds the signedess of a Gid_t.
+ *	1 for unsigned, -1 for signed.
+ */
+#define Gid_t_sign	-1		/* GID sign */
+
+/* Gid_t_size:
+ *	This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4		/* GID size */
+
+/* Gid_t:
+ *	This symbol holds the return type of getgid() and the type of
+ *	argument to setrgid() and related functions.  Typically,
+ *	it is the type of group ids in the kernel. It can be int, ushort,
+ *	gid_t, etc... It may be necessary to include <sys/types.h> to get
+ *	any typedef'ed information.
+ */
+#define Gid_t gid_t		/* Type for getgid(), etc... */
+
+/* Groups_t:
+ *	This symbol holds the type used for the second argument to
+ *	getgroups() and setgroups().  Usually, this is the same as
+ *	gidtype (gid_t) , but sometimes it isn't.
+ *	It can be int, ushort, gid_t, etc...
+ *	It may be necessary to include <sys/types.h> to get any
+ *	typedef'ed information.  This is only required if you have
+ *	getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t	/* Type for 2nd arg to [sg]etgroups() */
+#endif
+
+/* I_DIRENT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <dirent.h>. Using this symbol also triggers the definition
+ *	of the Direntry_t define which ends up being 'struct dirent' or
+ *	'struct direct' depending on the availability of <dirent.h>.
+ */
+/* DIRNAMLEN:
+ *	This symbol, if defined, indicates to the C program that the length
+ *	of directory entry names is provided by a d_namlen field.  Otherwise
+ *	you need to do strlen() on the d_name field.
+ */
+/* Direntry_t:
+ *	This symbol is set to 'struct direct' or 'struct dirent' depending on
+ *	whether dirent is available or not. You should use this pseudo type to
+ *	portably declare your directory entries.
+ */
+#define I_DIRENT		/**/
+#define DIRNAMLEN	/**/
+#define Direntry_t struct direct
+
+/* I_GRP:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <grp.h>.
+ */
+/* GRPASSWD:
+ *	This symbol, if defined, indicates to the C program that struct group
+ *	in <grp.h> contains gr_passwd.
+ */
+/*#define I_GRP		/**/
+/*#define GRPASSWD	/**/
+
+/* I_MACH_CTHREADS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <mach/cthreads.h>.
+ */
+/*#define   I_MACH_CTHREADS	/**/
+
+/* I_NDBM:
+ *	This symbol, if defined, indicates that <ndbm.h> exists and should
+ *	be included.
+ */
+/*#define I_NDBM	/**/
+
+/* I_NETDB:
+ *	This symbol, if defined, indicates that <netdb.h> exists and
+ *	should be included.
+ */
+/*#define I_NETDB		/**/
+
+/* I_NET_ERRNO:
+ *	This symbol, if defined, indicates that <net/errno.h> exists and
+ *	should be included.
+ */
+/*#define I_NET_ERRNO		/**/
+
+/* I_PTHREAD:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <pthread.h>.
+ */
+/*#define   I_PTHREAD	/**/
+
+/* I_PWD:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <pwd.h>.
+ */
+/* PWQUOTA:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_quota.
+ */
+/* PWAGE:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_age.
+ */
+/* PWCHANGE:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_change.
+ */
+/* PWCLASS:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_class.
+ */
+/* PWEXPIRE:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_expire.
+ */
+/* PWCOMMENT:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_comment.
+ */
+/* PWGECOS:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_gecos.
+ */
+/* PWPASSWD:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_passwd.
+ */
+/*#define I_PWD		/**/
+/*#define PWQUOTA	/**/
+/*#define PWAGE	/**/
+/*#define PWCHANGE	/**/
+/*#define PWCLASS	/**/
+/*#define PWEXPIRE	/**/
+/*#define PWCOMMENT	/**/
+/*#define PWGECOS	/**/
+/*#define PWPASSWD	/**/
+
+/* I_SYS_ACCESS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <sys/access.h>.
+ */
+/*#define   I_SYS_ACCESS                /**/
+
+/* I_SYS_SECURITY:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <sys/security.h>.
+ */
+/*#define   I_SYS_SECURITY	/**/
+
+/* I_SYSUIO:
+ *	This symbol, if defined, indicates that <sys/uio.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYSUIO		/**/
+
+/* I_STDARG:
+ *	This symbol, if defined, indicates that <stdarg.h> exists and should
+ *	be included.
+ */
+/* I_VARARGS:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <varargs.h>.
+ */
+#define I_STDARG		/**/
+/*#define I_VARARGS	/**/
+
+/* PERL_INC_VERSION_LIST:
+ *	This variable specifies the list of subdirectories in over
+ *	which perl.c:incpush() and lib/lib.pm will automatically
+ *	search when adding directories to @INC, in a format suitable
+ *	for a C initialization string.  See the inc_version_list entry
+ *	in Porting/Glossary for more details.
+ */
+/*#define PERL_INC_VERSION_LIST 0		/**/
+
+/* INSTALL_USR_BIN_PERL:
+ *	This symbol, if defined, indicates that Perl is to be installed
+ * 	also as /usr/bin/perl.
+ */
+/*#define INSTALL_USR_BIN_PERL	/**/
+
+/* Off_t:
+ *	This symbol holds the type used to declare offsets in the kernel.
+ *	It can be int, long, off_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t long		/* <offset> type */
+#define LSEEKSIZE 4		/* <offset> size */
+#define Off_t_size 4	/* <offset> size */
+
+/* Free_t:
+ *	This variable contains the return type of free().  It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ *	This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void *			/**/
+#define Free_t void			/**/
+
+/* PERL_MALLOC_WRAP:
+ *	This symbol, if defined, indicates that we'd like malloc wrap checks.
+ */
+#define PERL_MALLOC_WRAP		/**/
+
+/* MYMALLOC:
+ *	This symbol, if defined, indicates that we're using our own malloc.
+ */
+/*#define MYMALLOC			/**/
+
+/* Mode_t:
+ *	This symbol holds the type used to declare file modes
+ *	for systems calls.  It is usually mode_t, but may be
+ *	int or unsigned short.  It may be necessary to include <sys/types.h>
+ *	to get any typedef'ed information.
+ */
+#define Mode_t mode_t	 /* file mode parameter for system calls */
+
+/* Netdb_host_t:
+ *	This symbol holds the type used for the 1st argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ *	This symbol holds the type used for the 2nd argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ *	This symbol holds the type used for the argument to
+ *	gethostbyname().
+ */
+/* Netdb_net_t:
+ *	This symbol holds the type used for the 1st argument to
+ *	getnetbyaddr().
+ */
+#define Netdb_host_t		char * /**/
+#define Netdb_hlen_t		int /**/
+#define Netdb_name_t		char * /**/
+#define Netdb_net_t		long /**/
+
+/* PERL_OTHERLIBDIRS:
+ *	This variable contains a colon-separated set of paths for the perl
+ *	binary to search for additional library files or modules.
+ *	These directories will be tacked to the end of @INC.
+ *	Perl will automatically search below each path for version-
+ *	and architecture-specific directories.  See PERL_INC_VERSION_LIST
+ *	for more details.
+ */
+/*#define PERL_OTHERLIBDIRS ""		/**/
+
+/* Pid_t:
+ *	This symbol holds the type used to declare process ids in the kernel.
+ *	It can be int, uint, pid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t int		/* PID type */
+
+/* PRIVLIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ *	This symbol contains the ~name expanded version of PRIVLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "c:\\perl\\lib"		/**/
+#define PRIVLIB_EXP (win32_get_privlib("5.11.0"))	/**/
+
+/* CAN_PROTOTYPE:
+ *	If defined, this macro indicates that the C compiler can handle
+ *	function prototypes.
+ */
+/* _:
+ *	This macro is used to declare function parameters for folks who want
+ *	to make declarations with prototypes using a different style than
+ *	the above macros.  Use double parentheses.  For example:
+ *
+ *		int main _((int argc, char *argv[]));
+ */
+#define	CAN_PROTOTYPE	/**/
+#ifdef CAN_PROTOTYPE
+#define	_(args) args
+#else
+#define	_(args) ()
+#endif
+
+/* Select_fd_set_t:
+ *	This symbol holds the type used for the 2nd, 3rd, and 4th
+ *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
+ *	is defined, and 'int *' otherwise.  This is only useful if you
+ *	have select(), of course.
+ */
+#define Select_fd_set_t 	Perl_fd_set *	/**/
+
+/* SH_PATH:
+ *	This symbol contains the full pathname to the shell used on this
+ *	on this system to execute Bourne shell scripts.  Usually, this will be
+ *	/bin/sh, though it's possible that some systems will have /bin/ksh,
+ *	/bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ *	D:/bin/sh.exe.
+ */
+#define SH_PATH "cmd /x /c"  /**/
+
+/* SIG_NAME:
+ *	This symbol contains a list of signal names in order of
+ *	signal number. This is intended
+ *	to be used as a static array initialization, like this:
+ *		char *sig_name[] = { SIG_NAME };
+ *	The signals in the list are separated with commas, and each signal
+ *	is surrounded by double quotes. There is no leading SIG in the signal
+ *	name, i.e. SIGQUIT is known as "QUIT".
+ *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ *	etc., where nn is the actual signal number (e.g. NUM37).
+ *	The signal number for sig_name[i] is stored in sig_num[i].
+ *	The last element is 0 to terminate the list with a NULL.  This
+ *	corresponds to the 0 at the end of the sig_name_init list.
+ *	Note that this variable is initialized from the sig_name_init,
+ *	not from sig_name (which is unused).
+ */
+/* SIG_NUM:
+ *	This symbol contains a list of signal numbers, in the same order as the
+ *	SIG_NAME list. It is suitable for static array initialization, as in:
+ *		int sig_num[] = { SIG_NUM };
+ *	The signals in the list are separated with commas, and the indices
+ *	within that list and the SIG_NAME list match, so it's easy to compute
+ *	the signal name from a number or vice versa at the price of a small
+ *	dynamic linear lookup.
+ *	Duplicates are allowed, but are moved to the end of the list.
+ *	The signal number corresponding to sig_name[i] is sig_number[i].
+ *	if (i < NSIG) then sig_number[i] == i.
+ *	The last element is 0, corresponding to the 0 at the end of
+ *	the sig_name_init list.
+ *	Note that this variable is initialized from the sig_num_init,
+ *	not from sig_num (which is unused).
+ */
+/* SIG_SIZE:
+ *	This variable contains the number of elements of the SIG_NAME
+ *	and SIG_NUM arrays, excluding the final NULL entry.
+ */
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0		/**/
+#define SIG_NUM  0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0		/**/
+#define SIG_SIZE 27			/**/
+
+/* SITEARCH:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-dependent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ *	This symbol contains the ~name expanded version of SITEARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "c:\\perl\\site\\lib"		/**/
+/*#define SITEARCH_EXP ""	/**/
+
+/* SITELIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-independent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ *	This symbol contains the ~name expanded version of SITELIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ *	This define is SITELIB_EXP with any trailing version-specific component
+ *	removed.  The elements in inc_version_list (inc_version_list.U) can
+ *	be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "c:\\perl\\site\\lib"		/**/
+#define SITELIB_EXP (win32_get_sitelib("5.11.0"))	/**/
+#define SITELIB_STEM ""		/**/
+
+/* Size_t_size:
+ *	This symbol holds the size of a Size_t in bytes.
+ */
+#define Size_t_size 4		/**/
+
+/* Size_t:
+ *	This symbol holds the type used to declare length parameters
+ *	for string functions.  It is usually size_t, but may be
+ *	unsigned long, int, etc.  It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t	 /* length paramater for string functions */
+
+/* Sock_size_t:
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
+ */
+#define Sock_size_t		int /**/
+
+/* STDCHAR:
+ *	This symbol is defined to be the type of char used in stdio.h.
+ *	It has the values "unsigned char" or "char".
+ */
+#define STDCHAR char	/**/
+
+/* Uid_t_f:
+ *	This symbol defines the format string used for printing a Uid_t.
+ */
+#define	Uid_t_f		"ld"		/**/
+
+/* Uid_t_sign:
+ *	This symbol holds the signedess of a Uid_t.
+ *	1 for unsigned, -1 for signed.
+ */
+#define Uid_t_sign	-1		/* UID sign */
+
+/* Uid_t_size:
+ *	This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4		/* UID size */
+
+/* Uid_t:
+ *	This symbol holds the type used to declare user ids in the kernel.
+ *	It can be int, ushort, uid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t		/* UID type */
+
+/* USE_ITHREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the 5.005-based threading implementation.
+ *	Only valid up to 5.8.x.
+ */
+/* OLD_PTHREADS_API:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built to use the old draft POSIX threads API.
+ */
+/* USE_REENTRANT_API:
+ *	This symbol, if defined, indicates that Perl should
+ *	try to use the various _r versions of library functions.
+ *	This is extremely experimental.
+ */
+/*#define	USE_5005THREADS		/**/
+/*#define	USE_ITHREADS		/**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define		USE_THREADS		/* until src is revised*/
+#endif
+/*#define	OLD_PTHREADS_API		/**/
+/*#define	USE_REENTRANT_API	/**/
+
+/* PERL_VENDORARCH:
+ *	If defined, this symbol contains the name of a private library.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.
+ *	It may have a ~ on the front.
+ *	The standard distribution will put nothing in this directory.
+ *	Vendors who distribute perl may wish to place their own
+ *	architecture-dependent modules and extensions in this directory with
+ *		MakeMaker Makefile.PL INSTALLDIRS=vendor
+ *	or equivalent.  See INSTALL for details.
+ */
+/* PERL_VENDORARCH_EXP:
+ *	This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define PERL_VENDORARCH ""		/**/
+/*#define PERL_VENDORARCH_EXP ""		/**/
+
+/* PERL_VENDORLIB_EXP:
+ *	This symbol contains the ~name expanded version of VENDORLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* PERL_VENDORLIB_STEM:
+ *	This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ *	removed.  The elements in inc_version_list (inc_version_list.U) can
+ *	be tacked onto this variable to generate a list of directories to search.
+ */
+/*#define PERL_VENDORLIB_EXP ""		/**/
+/*#define PERL_VENDORLIB_STEM ""		/**/
+
+/* VOIDFLAGS:
+ *	This symbol indicates how much support of the void type is given by this
+ *	compiler.  What various bits mean:
+ *
+ *	    1 = supports declaration of void
+ *	    2 = supports arrays of pointers to functions returning void
+ *	    4 = supports comparisons between pointers to void functions and
+ *		    addresses of void functions
+ *	    8 = suports declaration of generic void pointers
+ *
+ *	The package designer should define VOIDUSED to indicate the requirements
+ *	of the package.  This can be done either by #defining VOIDUSED before
+ *	including config.h, or by defining defvoidused in Myinit.U.  If the
+ *	latter approach is taken, only those flags will be tested.  If the
+ *	level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int		/* is void to be avoided? */
+#define M_VOID			/* Xenix strikes again */
+#endif
+
+/* USE_CROSS_COMPILE:
+ *	This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ *	This symbol, if defined, indicates the target architecture
+ *	Perl has been cross-compiled to.  Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define	USE_CROSS_COMPILE	/**/
+#define	PERL_TARGETARCH	""	/**/
+#endif
+
+/* MEM_ALIGNBYTES:
+ *	This symbol contains the number of bytes required to align a
+ *	double, or a long double when applicable. Usual values are 2,
+ *	4 and 8. The default is eight, for safety.
+ */
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+#  define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES 8
+#endif
+
+/* BYTEORDER:
+ *	This symbol holds the hexadecimal constant defined in byteorder,
+ *	in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
+ *	If the compiler supports cross-compiling or multiple-architecture
+ *	binaries (eg. on NeXT systems), use compiler-defined macros to
+ *	determine the byte order.
+ *	On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
+ *	Binaries (MAB) on either big endian or little endian machines.
+ *	The endian-ness is available at compile-time.  This only matters
+ *	for perl, where the config.h can be generated and installed on
+ *	one system, and used by a different architecture to build an
+ *	extension.  Older versions of NeXT that might not have
+ *	defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ *	so the default case (for NeXT) is big endian to catch them.
+ *	This might matter for NeXT 3.0.
+ */
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+#  ifdef __LITTLE_ENDIAN__
+#    if LONGSIZE == 4
+#      define BYTEORDER 0x1234
+#    else
+#      if LONGSIZE == 8
+#        define BYTEORDER 0x12345678
+#      endif
+#    endif
+#  else
+#    ifdef __BIG_ENDIAN__
+#      if LONGSIZE == 4
+#        define BYTEORDER 0x4321
+#      else
+#        if LONGSIZE == 8
+#          define BYTEORDER 0x87654321
+#        endif
+#      endif
+#    endif
+#  endif
+#  if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+#    define BYTEORDER 0x4321
+#  endif
+#else
+#define BYTEORDER 0x1234	/* large digits for MSB */
+#endif /* NeXT */
+
+/* CASTI32:
+ *	This symbol is defined if the C compiler can cast negative
+ *	or large floating point numbers to 32-bit ints.
+ */
+#ifndef _MSC_VER
+#   define	CASTI32		/**/
+#endif
+
+/* CASTNEGFLOAT:
+ *	This symbol is defined if the C compiler can cast negative
+ *	numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ *	This symbol contains flags that say what difficulties the compiler
+ *	has casting odd floating values to unsigned long:
+ *		0 = ok
+ *		1 = couldn't cast < 0
+ *		2 = couldn't cast >= 0x80000000
+ *		4 = couldn't cast in argument expression list
+ */
+#define	CASTNEGFLOAT		/**/
+#define CASTFLAGS 0		/**/
+
+/* VOID_CLOSEDIR:
+ *	This symbol, if defined, indicates that the closedir() routine
+ *	does not return a value.
+ */
+/*#define VOID_CLOSEDIR		/**/
+
+/* HAS_FD_SET:
+ *	This symbol, when defined, indicates presence of the fd_set typedef
+ *	in <sys/types.h>
+ */
+#define HAS_FD_SET	/**/
+
+/* Gconvert:
+ *	This preprocessor macro is defined to convert a floating point
+ *	number to a string without a trailing decimal point.  This
+ *	emulates the behavior of sprintf("%g"), but is sometimes much more
+ *	efficient.  If gconvert() is not available, but gcvt() drops the
+ *	trailing decimal point, then gcvt() is used.  If all else fails,
+ *	a macro using sprintf("%g") is used. Arguments for the Gconvert
+ *	macro are: value, number of digits, whether trailing zeros should
+ *	be retained, and the output buffer.
+ *	The usual values are:
+ *		d_Gconvert='gconvert((x),(n),(t),(b))'
+ *		d_Gconvert='gcvt((x),(n),(b))'
+ *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ *	The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* HAS_GETPAGESIZE:
+ *	This symbol, if defined, indicates that the getpagesize system call
+ *	is available to get system page size, which is the granularity of
+ *	many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE		/**/
+
+/* HAS_GNULIBC:
+ *	This symbol, if defined, indicates to the C program that
+ *	the GNU C library is being used.  A better check is to use
+ *	the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+ */
+/*#define HAS_GNULIBC  	/**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+#   define _GNU_SOURCE
+#endif
+
+/* HAS_ISASCII:
+ *	This manifest constant lets the C program know that isascii
+ *	is available.
+ */
+#define HAS_ISASCII		/**/
+
+/* HAS_LCHOWN:
+ *	This symbol, if defined, indicates that the lchown routine is
+ *	available to operate on a symbolic link (instead of following the
+ *	link).
+ */
+/*#define HAS_LCHOWN		/**/
+
+/* HAS_OPEN3:
+ *	This manifest constant lets the C program know that the three
+ *	argument form of open(2) is available.
+ */
+/*#define HAS_OPEN3		/**/
+
+/* HAS_SAFE_BCOPY:
+ *	This symbol, if defined, indicates that the bcopy routine is available
+ *	to copy potentially overlapping memory blocks. Normally, you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+/*#define HAS_SAFE_BCOPY	/**/
+
+/* HAS_SAFE_MEMCPY:
+ *	This symbol, if defined, indicates that the memcpy routine is available
+ *	to copy potentially overlapping memory blocks.  If you need to
+ *	copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ *	use memmove() instead, if available.
+ */
+/*#define HAS_SAFE_MEMCPY	/**/
+
+/* HAS_SANE_MEMCMP:
+ *	This symbol, if defined, indicates that the memcmp routine is available
+ *	and can be used to compare relative magnitudes of chars with their high
+ *	bits set.  If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP	/**/
+
+/* HAS_SIGACTION:
+ *	This symbol, if defined, indicates that Vr4's sigaction() routine
+ *	is available.
+ */
+/*#define HAS_SIGACTION	/**/
+
+/* HAS_SIGSETJMP:
+ *	This variable indicates to the C program that the sigsetjmp()
+ *	routine is available to save the calling process's registers
+ *	and stack environment for later use by siglongjmp(), and
+ *	to optionally save the process's signal mask.  See
+ *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ *	This macro is used in the same way as sigsetjmp(), but will invoke
+ *	traditional setjmp() if sigsetjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ *	This macro is used in the same way as siglongjmp(), but will invoke
+ *	traditional longjmp() if siglongjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP	/**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
 
 /* USE_STDIO_PTR:
  *	This symbol is defined if the _ptr and _cnt fields (or similar)
@@ -3081,37 +3123,756 @@
 #define FILE_bufsiz(fp)	((fp)->_cnt + (fp)->_ptr - (fp)->_base)
 #endif
 
-/* HAS_STRERROR:
- *	This symbol, if defined, indicates that the strerror routine is
- *	available to translate error numbers to strings. See the writeup
- *	of Strerror() in this file before you try to define your own.
+/* HAS_VPRINTF:
+ *	This symbol, if defined, indicates that the vprintf routine is available
+ *	to printf with a pointer to an argument list.  If unavailable, you
+ *	may need to write your own, probably in terms of _doprnt().
  */
-/* HAS_SYS_ERRLIST:
- *	This symbol, if defined, indicates that the sys_errlist array is
- *	available to translate error numbers to strings. The extern int
- *	sys_nerr gives the size of that table.
+/* USE_CHAR_VSPRINTF:
+ *	This symbol is defined if this system has vsprintf() returning type
+ *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
+ *	is up to the package author to declare vsprintf correctly based on the
+ *	symbol.
  */
-/* Strerror:
- *	This preprocessor symbol is defined as a macro if strerror() is
- *	not available to translate error numbers to strings but sys_errlist[]
- *	array is there.
+#define HAS_VPRINTF	/**/
+/*#define USE_CHAR_VSPRINTF 	/**/
+
+/* DOUBLESIZE:
+ *	This symbol contains the size of a double, so that the C preprocessor
+ *	can make decisions based on it.
  */
-#define HAS_STRERROR		/**/
-#define HAS_SYS_ERRLIST	/**/
-#define Strerror(e) strerror(e)
+#define DOUBLESIZE 8		/**/
 
-/* HAS_STRERROR_R:
- *	This symbol, if defined, indicates that the strerror_r routine
- *	is available to strerror re-entrantly.
+/* I_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <time.h>.
  */
-/* STRERROR_R_PROTO:
- *	This symbol encodes the prototype of strerror_r.
- *	It is zero if d_strerror_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
- *	is defined.
+/* I_SYS_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h>.
  */
-/*#define HAS_STRERROR_R	   /**/
-#define STRERROR_R_PROTO 0	   /**/
+/* I_SYS_TIME_KERNEL:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h> with KERNEL defined.
+ */
+/* HAS_TM_TM_ZONE:
+ *	This symbol, if defined, indicates to the C program that
+ *	the struct tm has a tm_zone field.
+ */
+/* HAS_TM_TM_GMTOFF:
+ *	This symbol, if defined, indicates to the C program that
+ *	the struct tm has a tm_gmtoff field.
+ */
+#define I_TIME		/**/
+/*#define I_SYS_TIME		/**/
+/*#define I_SYS_TIME_KERNEL		/**/
+/*#define HAS_TM_TM_ZONE		/**/
+/*#define HAS_TM_TM_GMTOFF		/**/
+
+/* VAL_O_NONBLOCK:
+ *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ *	non-blocking I/O for the file descriptor. Note that there is no way
+ *	back, i.e. you cannot turn it blocking again this way. If you wish to
+ *	alternatively switch between blocking and non-blocking, use the
+ *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ *	This symbol holds the errno error code set by read() when no data was
+ *	present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ *	This symbol holds the return code from read() when no data is present
+ *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ *	not defined, then you can't distinguish between no data and EOF by
+ *	issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ *	This symbol, if defined, indicates to the C program that a read() on
+ *	a non-blocking file descriptor will return 0 on EOF, and not the value
+ *	held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* PTRSIZE:
+ *	This symbol contains the size of a pointer, so that the C preprocessor
+ *	can make decisions based on it.  It will be sizeof(void *) if
+ *	the compiler supports (void *); otherwise it will be
+ *	sizeof(char *).
+ */
+#define PTRSIZE 4		/**/
+
+/* Drand01:
+ *	This macro is to be used to generate uniformly distributed
+ *	random numbers over the range [0., 1.[.  You may have to supply
+ *	an 'extern double drand48();' in your program since SunOS 4.1.3
+ *	doesn't provide you with anything relevant in its headers.
+ *	See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ *	This symbol defines the type of the argument of the
+ *	random seed function.
+ */
+/* seedDrand01:
+ *	This symbol defines the macro to be used in seeding the
+ *	random number generator (see Drand01).
+ */
+/* RANDBITS:
+ *	This symbol indicates how many bits are produced by the
+ *	function used to generate normalized random numbers.
+ *	Values include 15, 16, 31, and 48.
+ */
+#define Drand01()		(rand()/(double)((unsigned)1<<RANDBITS))		/**/
+#define Rand_seed_t		unsigned		/**/
+#define seedDrand01(x)	srand((Rand_seed_t)x)	/**/
+#define RANDBITS		15		/**/
+
+/* SSize_t:
+ *	This symbol holds the type used by functions that return
+ *	a count of bytes or an error condition.  It must be a signed type.
+ *	It is usually ssize_t, but may be long or int, etc.
+ *	It may be necessary to include <sys/types.h> or <unistd.h>
+ *	to get any typedef'ed information.
+ *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t int	 /* signed count of bytes */
+
+/* EBCDIC:
+ *     This symbol, if defined, indicates that this system uses
+ *	EBCDIC encoding.
+ */
+/*#define	EBCDIC 		/**/
+
+/* HAS_ATOLF:
+ *	This symbol, if defined, indicates that the atolf routine is
+ *	available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF		/**/
+
+/* HAS_ATOLL:
+ *	This symbol, if defined, indicates that the atoll routine is
+ *	available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL		/**/
+
+/* HAS__FWALK:
+ *	This symbol, if defined, indicates that the _fwalk system call is
+ *	available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK		/**/
+
+/* HAS_AINTL:
+ *	This symbol, if defined, indicates that the aintl routine is
+ *	available.  If copysignl is also present we can emulate modfl.
+ */
+/*#define HAS_AINTL		/**/
+
+/* HAS_BUILTIN_CHOOSE_EXPR:
+ *	Can we handle GCC builtin for compile-time ternary-like expressions
+ */
+/* HAS_BUILTIN_EXPECT:
+ *	Can we handle GCC builtin for telling that certain values are more
+ *	likely
+ */
+/*#define HAS_BUILTIN_EXPECT	/**/
+/*#define HAS_BUILTIN_CHOOSE_EXPR	/**/
+
+/* HAS_C99_VARIADIC_MACROS:
+ *	If defined, the compiler supports C99 variadic macros.
+ */
+/*#define	HAS_C99_VARIADIC_MACROS	/**/
+
+/* HAS_CLASS:
+ *	This symbol, if defined, indicates that the class routine is
+ *	available to classify doubles.  Available for example in AIX.
+ *	The returned values are defined in <float.h> and are:
+ *
+ *	FP_PLUS_NORM	Positive normalized, nonzero
+ *	FP_MINUS_NORM	Negative normalized, nonzero
+ *	FP_PLUS_DENORM	Positive denormalized, nonzero
+ *	FP_MINUS_DENORM	Negative denormalized, nonzero
+ *	FP_PLUS_ZERO	+0.0
+ *	FP_MINUS_ZERO	-0.0
+ *	FP_PLUS_INF	+INF
+ *	FP_MINUS_INF	-INF
+ *	FP_NANS		Signaling Not a Number (NaNS)
+ *	FP_NANQ		Quiet Not a Number (NaNQ)
+ */
+/*#define HAS_CLASS		/**/
+
+/* HAS_CLEARENV:
+ *	This symbol, if defined, indicates that the clearenv () routine is
+ *	available for use.
+ */
+/*#define HAS_CLEARENV		/**/
+
+/* HAS_STRUCT_CMSGHDR:
+ *	This symbol, if defined, indicates that the struct cmsghdr
+ *	is supported.
+ */
+/*#define HAS_STRUCT_CMSGHDR	/**/
+
+/* HAS_COPYSIGNL:
+ *	This symbol, if defined, indicates that the copysignl routine is
+ *	available.  If aintl is also present we can emulate modfl.
+ */
+/*#define HAS_COPYSIGNL		/**/
+
+/* USE_CPLUSPLUS:
+ *	This symbol, if defined, indicates that a C++ compiler was
+ *	used to compiled Perl and will be used to compile extensions.
+ */
+/*#define USE_CPLUSPLUS		/**/
+
+/* HAS_DBMINIT_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the dbminit() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern int dbminit(char *);
+ */
+/*#define	HAS_DBMINIT_PROTO	/**/
+
+/* HAS_DIR_DD_FD:
+ *	This symbol, if defined, indicates that the the DIR* dirstream
+ *	structure contains a member variable named dd_fd.
+ */
+/*#define HAS_DIR_DD_FD		/**/
+
+/* HAS_DIRFD:
+ *	This manifest constant lets the C program know that dirfd
+ *	is available.
+ */
+/*#define HAS_DIRFD		/**/
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ *	This symbol, if defined, indicates that we need to prepend an
+ *	underscore to the symbol name before calling dlsym().  This only
+ *	makes sense if you *have* dlsym, which we will presume is the
+ *	case if you're using dl_dlopen.xs.
+ */
+/*#define 	DLSYM_NEEDS_UNDERSCORE 	/**/
+
+/* HAS_FAST_STDIO:
+ *	This symbol, if defined, indicates that the "fast stdio"
+ *	is available to manipulate the stdio buffers directly.
+ */
+#define HAS_FAST_STDIO		/**/
+
+/* HAS_FCHDIR:
+ *	This symbol, if defined, indicates that the fchdir routine is
+ *	available to change directory using a file descriptor.
+ */
+/*#define HAS_FCHDIR		/**/
+
+/* FCNTL_CAN_LOCK:
+ *	This symbol, if defined, indicates that fcntl() can be used
+ *	for file locking.  Normally on Unix systems this is defined.
+ *	It may be undefined on VMS.
+ */
+/*#define FCNTL_CAN_LOCK		/**/
+
+/* HAS_FINITE:
+ *	This symbol, if defined, indicates that the finite routine is
+ *	available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_FINITE		/**/
+
+/* HAS_FINITEL:
+ *	This symbol, if defined, indicates that the finitel routine is
+ *	available to check whether a long double is finite
+ *	(non-infinity non-NaN).
+ */
+/*#define HAS_FINITEL		/**/
+
+/* HAS_FLOCK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the flock() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern int flock(int, int);
+ */
+#define	HAS_FLOCK_PROTO	/**/
+
+/* HAS_FP_CLASS:
+ *	This symbol, if defined, indicates that the fp_class routine is
+ *	available to classify doubles.  Available for example in Digital UNIX.
+ *	The returned values are defined in <math.h> and are:
+ *
+ *	FP_SNAN           Signaling NaN (Not-a-Number)
+ *	FP_QNAN           Quiet NaN (Not-a-Number)
+ *	FP_POS_INF        +infinity
+ *	FP_NEG_INF        -infinity
+ *	FP_POS_NORM       Positive normalized
+ *	FP_NEG_NORM       Negative normalized
+ *	FP_POS_DENORM     Positive denormalized
+ *	FP_NEG_DENORM     Negative denormalized
+ *	FP_POS_ZERO       +0.0 (positive zero)
+ *	FP_NEG_ZERO       -0.0 (negative zero)
+ */
+/*#define HAS_FP_CLASS		/**/
+
+/* HAS_FPCLASS:
+ *	This symbol, if defined, indicates that the fpclass routine is
+ *	available to classify doubles.  Available for example in Solaris/SVR4.
+ *	The returned values are defined in <ieeefp.h> and are:
+ *
+ *	FP_SNAN		signaling NaN
+ *	FP_QNAN		quiet NaN
+ *	FP_NINF		negative infinity
+ *	FP_PINF		positive infinity
+ *	FP_NDENORM	negative denormalized non-zero
+ *	FP_PDENORM	positive denormalized non-zero
+ *	FP_NZERO	negative zero
+ *	FP_PZERO	positive zero
+ *	FP_NNORM	negative normalized non-zero
+ *	FP_PNORM	positive normalized non-zero
+ */
+/*#define HAS_FPCLASS		/**/
+
+/* HAS_FPCLASSIFY:
+ *	This symbol, if defined, indicates that the fpclassify routine is
+ *	available to classify doubles.  Available for example in HP-UX.
+ *	The returned values are defined in <math.h> and are
+ *
+ *           FP_NORMAL     Normalized
+ *           FP_ZERO       Zero
+ *           FP_INFINITE   Infinity
+ *           FP_SUBNORMAL  Denormalized
+ *           FP_NAN        NaN
+ *
+ */
+/*#define HAS_FPCLASSIFY		/**/
+
+/* HAS_FPCLASSL:
+ *	This symbol, if defined, indicates that the fpclassl routine is
+ *	available to classify long doubles.  Available for example in IRIX.
+ *	The returned values are defined in <ieeefp.h> and are:
+ *
+ *	FP_SNAN		signaling NaN
+ *	FP_QNAN		quiet NaN
+ *	FP_NINF		negative infinity
+ *	FP_PINF		positive infinity
+ *	FP_NDENORM	negative denormalized non-zero
+ *	FP_PDENORM	positive denormalized non-zero
+ *	FP_NZERO	negative zero
+ *	FP_PZERO	positive zero
+ *	FP_NNORM	negative normalized non-zero
+ *	FP_PNORM	positive normalized non-zero
+ */
+/*#define HAS_FPCLASSL		/**/
+
+/* HAS_FPOS64_T:
+ *	This symbol will be defined if the C compiler supports fpos64_t.
+ */
+/*#define	HAS_FPOS64_T    	/**/
+
+/* HAS_FREXPL:
+ *	This symbol, if defined, indicates that the frexpl routine is
+ *	available to break a long double floating-point number into
+ *	a normalized fraction and an integral power of 2.
+ */
+/*#define HAS_FREXPL		/**/
+
+/* HAS_STRUCT_FS_DATA:
+ *	This symbol, if defined, indicates that the struct fs_data
+ *	to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_FS_DATA	/**/
+
+/* HAS_FSEEKO:
+ *	This symbol, if defined, indicates that the fseeko routine is
+ *	available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FSEEKO		/**/
+
+/* HAS_FSTATFS:
+ *	This symbol, if defined, indicates that the fstatfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATFS		/**/
+
+/* HAS_FSYNC:
+ *	This symbol, if defined, indicates that the fsync routine is
+ *	available to write a file's modified data and attributes to
+ *	permanent storage.
+ */
+/*#define HAS_FSYNC		/**/
+
+/* HAS_FTELLO:
+ *	This symbol, if defined, indicates that the ftello routine is
+ *	available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FTELLO		/**/
+
+/* HAS_FUTIMES:
+ *	This symbol, if defined, indicates that the futimes routine is
+ *	available to change file descriptor time stamps with struct timevals.
+ */
+/*#define HAS_FUTIMES		/**/
+
+/* HAS_GETCWD:
+ *	This symbol, if defined, indicates that the getcwd routine is
+ *	available to get the current working directory.
+ */
+#define HAS_GETCWD		/**/
+
+/* HAS_GETESPWNAM:
+ *	This symbol, if defined, indicates that the getespwnam system call is
+ *	available to retrieve enchanced (shadow) password entries by name.
+ */
+/*#define HAS_GETESPWNAM		/**/
+
+/* HAS_GETFSSTAT:
+ *	This symbol, if defined, indicates that the getfsstat routine is
+ *	available to stat filesystems in bulk.
+ */
+/*#define HAS_GETFSSTAT		/**/
+
+/* HAS_GETITIMER:
+ *	This symbol, if defined, indicates that the getitimer routine is
+ *	available to return interval timers.
+ */
+/*#define HAS_GETITIMER		/**/
+
+/* HAS_GETMNT:
+ *	This symbol, if defined, indicates that the getmnt routine is
+ *	available to get filesystem mount info by filename.
+ */
+/*#define HAS_GETMNT		/**/
+
+/* HAS_GETMNTENT:
+ *	This symbol, if defined, indicates that the getmntent routine is
+ *	available to iterate through mounted file systems to get their info.
+ */
+/*#define HAS_GETMNTENT		/**/
+
+/* HAS_GETPRPWNAM:
+ *	This symbol, if defined, indicates that the getprpwnam system call is
+ *	available to retrieve protected (shadow) password entries by name.
+ */
+/*#define HAS_GETPRPWNAM		/**/
+
+/* HAS_GETSPNAM:
+ *	This symbol, if defined, indicates that the getspnam system call is
+ *	available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM		/**/
+
+/* HAS_HASMNTOPT:
+ *	This symbol, if defined, indicates that the hasmntopt routine is
+ *	available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT		/**/
+
+/* HAS_ILOGBL:
+ *	This symbol, if defined, indicates that the ilogbl routine is
+ *	available.  If scalbnl is also present we can emulate frexpl.
+ */
+/*#define HAS_ILOGBL		/**/
+
+/* HAS_INT64_T:
+ *     This symbol will defined if the C compiler supports int64_t.
+ *     Usually the <inttypes.h> needs to be included, but sometimes
+ *	<sys/types.h> is enough.
+ */
+/*#define     HAS_INT64_T               /**/
+
+/* HAS_ISFINITE:
+ *	This symbol, if defined, indicates that the isfinite routine is
+ *	available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_ISFINITE		/**/
+
+/* HAS_ISINF:
+ *	This symbol, if defined, indicates that the isinf routine is
+ *	available to check whether a double is an infinity.
+ */
+/*#define HAS_ISINF		/**/
+
+/* HAS_ISNAN:
+ *	This symbol, if defined, indicates that the isnan routine is
+ *	available to check whether a double is a NaN.
+ */
+#define HAS_ISNAN		/**/
+
+/* HAS_ISNANL:
+ *	This symbol, if defined, indicates that the isnanl routine is
+ *	available to check whether a long double is a NaN.
+ */
+/*#define HAS_ISNANL		/**/
+
+/* HAS_LDBL_DIG:
+ *	This symbol, if defined, indicates that this system's <float.h>
+ *	or <limits.h> defines the symbol LDBL_DIG, which is the number
+ *	of significant digits in a long double precision number. Unlike
+ *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG 	/**/
+
+/* LIBM_LIB_VERSION:
+ *	This symbol, if defined, indicates that libm exports _LIB_VERSION
+ *	and that math.h defines the enum to manipulate it.
+ */
+/*#define LIBM_LIB_VERSION		/**/
+
+/* HAS_MADVISE:
+ *	This symbol, if defined, indicates that the madvise system call is
+ *	available to map a file into memory.
+ */
+/*#define HAS_MADVISE		/**/
+
+/* HAS_MALLOC_SIZE:
+ *	This symbol, if defined, indicates that the malloc_size
+ *	routine is available for use.
+ */
+/*#define HAS_MALLOC_SIZE		/**/
+
+/* HAS_MALLOC_GOOD_SIZE:
+ *	This symbol, if defined, indicates that the malloc_good_size
+ *	routine is available for use.
+ */
+/*#define HAS_MALLOC_GOOD_SIZE	/**/
+
+/* HAS_MKDTEMP:
+ *	This symbol, if defined, indicates that the mkdtemp routine is
+ *	available to exclusively create a uniquely named temporary directory.
+ */
+/*#define HAS_MKDTEMP		/**/
+
+/* HAS_MKSTEMPS:
+ *	This symbol, if defined, indicates that the mkstemps routine is
+ *	available to excluslvely create and open a uniquely named
+ *	(with a suffix) temporary file.
+ */
+/*#define HAS_MKSTEMPS		/**/
+
+/* HAS_MODFL:
+ *	This symbol, if defined, indicates that the modfl routine is
+ *	available to split a long double x into a fractional part f and
+ *	an integer part i such that |f| < 1.0 and (f + i) = x.
+ */
+/* HAS_MODFL_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the modfl() function.  Otherwise, it is up
+ *	to the program to supply one.
+ */
+/* HAS_MODFL_POW32_BUG:
+ *	This symbol, if defined, indicates that the modfl routine is
+ *	broken for long doubles >= pow(2, 32).
+ *	For example from 4294967303.150000 one would get 4294967302.000000
+ *	and 1.150000.  The bug has been seen in certain versions of glibc,
+ *	release 2.2.2 is known to be okay.
+ */
+/*#define HAS_MODFL		/**/
+/*#define HAS_MODFL_PROTO		/**/
+/*#define HAS_MODFL_POW32_BUG		/**/
+
+/* HAS_MPROTECT:
+ *	This symbol, if defined, indicates that the mprotect system call is
+ *	available to modify the access protection of a memory mapped file.
+ */
+/*#define HAS_MPROTECT		/**/
+
+/* HAS_STRUCT_MSGHDR:
+ *	This symbol, if defined, indicates that the struct msghdr
+ *	is supported.
+ */
+/*#define HAS_STRUCT_MSGHDR	/**/
+
+/* HAS_NL_LANGINFO:
+ *	This symbol, if defined, indicates that the nl_langinfo routine is
+ *	available to return local data.  You will also need <langinfo.h>
+ *	and therefore I_LANGINFO.
+ */
+/*#define HAS_NL_LANGINFO		/**/
+
+/* HAS_OFF64_T:
+ *	This symbol will be defined if the C compiler supports off64_t.
+ */
+/*#define	HAS_OFF64_T    		/**/
+
+/* HAS_PROCSELFEXE:
+ *	This symbol is defined if PROCSELFEXE_PATH is a symlink
+ *	to the absolute pathname of the executing program.
+ */
+/* PROCSELFEXE_PATH:
+ *	If HAS_PROCSELFEXE is defined this symbol is the filename
+ *	of the symbolic link pointing to the absolute pathname of
+ *	the executing program.
+ */
+/*#define HAS_PROCSELFEXE	/**/
+#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
+#define PROCSELFEXE_PATH		/**/
+#endif
+
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ *	This symbol, if defined, indicates that the pthread_attr_setscope
+ *	system call is available to set the contention scope attribute of
+ *	a thread attribute object.
+ */
+/*#define HAS_PTHREAD_ATTR_SETSCOPE		/**/
+
+/* HAS_READV:
+ *	This symbol, if defined, indicates that the readv routine is
+ *	available to do gather reads.  You will also need <sys/uio.h>
+ *	and there I_SYSUIO.
+ */
+/*#define HAS_READV		/**/
+
+/* HAS_RECVMSG:
+ *	This symbol, if defined, indicates that the recvmsg routine is
+ *	available to send structured socket messages.
+ */
+/*#define HAS_RECVMSG		/**/
+
+/* HAS_SBRK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the sbrk() function.  Otherwise, it is up
+ *	to the program to supply one.  Good guesses are
+ *		extern void* sbrk(int);
+ *		extern void* sbrk(size_t);
+ */
+/*#define	HAS_SBRK_PROTO	/**/
+
+/* HAS_SCALBNL:
+ *	This symbol, if defined, indicates that the scalbnl routine is
+ *	available.  If ilogbl is also present we can emulate frexpl.
+ */
+/*#define HAS_SCALBNL		/**/
+
+/* HAS_SENDMSG:
+ *	This symbol, if defined, indicates that the sendmsg routine is
+ *	available to send structured socket messages.
+ */
+/*#define HAS_SENDMSG		/**/
+
+/* HAS_SETITIMER:
+ *	This symbol, if defined, indicates that the setitimer routine is
+ *	available to set interval timers.
+ */
+/*#define HAS_SETITIMER		/**/
+
+/* HAS_SETPROCTITLE:
+ *	This symbol, if defined, indicates that the setproctitle routine is
+ *	available to set process title.
+ */
+/*#define HAS_SETPROCTITLE		/**/
+
+/* USE_SFIO:
+ *	This symbol, if defined, indicates that sfio should
+ *	be used.
+ */
+/*#define	USE_SFIO		/**/
+
+/* HAS_SIGNBIT:
+ *	This symbol, if defined, indicates that the signbit routine is
+ *	available to check if the given number has the sign bit set.
+ *	This should include correct testing of -0.0.  This will only be set
+ *	if the signbit() routine is safe to use with the NV type used internally
+ *	in perl.  Users should call Perl_signbit(), which will be #defined to
+ *	the system's signbit() function or macro if this symbol is defined.
+ */
+/*#define HAS_SIGNBIT		/**/
+
+/* HAS_SIGPROCMASK:
+ *	This symbol, if defined, indicates that the sigprocmask
+ *	system call is available to examine or change the signal mask
+ *	of the calling process.
+ */
+/*#define HAS_SIGPROCMASK		/**/
+
+/* USE_SITECUSTOMIZE:
+ *	This symbol, if defined, indicates that sitecustomize should
+ *	be used.
+ */
+#ifndef USE_SITECUSTOMIZE
+/*#define	USE_SITECUSTOMIZE		/**/
+#endif
+
+/* HAS_SNPRINTF:
+ *	This symbol, if defined, indicates that the snprintf () library
+ *	function is available for use.
+ */
+/* HAS_VSNPRINTF:
+ *	This symbol, if defined, indicates that the vsnprintf () library
+ *	function is available for use.
+ */
+#define HAS_SNPRINTF	/**/
+#define HAS_VSNPRINTF	/**/
+
+/* HAS_SOCKATMARK:
+ *	This symbol, if defined, indicates that the sockatmark routine is
+ *	available to test whether a socket is at the out-of-band mark.
+ */
+/*#define HAS_SOCKATMARK		/**/
+
+/* HAS_SOCKATMARK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the sockatmark() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern int sockatmark(int);
+ */
+/*#define	HAS_SOCKATMARK_PROTO	/**/
+
+/* HAS_SOCKS5_INIT:
+ *	This symbol, if defined, indicates that the socks5_init routine is
+ *	available to initialize SOCKS 5.
+ */
+/*#define HAS_SOCKS5_INIT		/**/
+
+/* SPRINTF_RETURNS_STRLEN:
+ *	This variable defines whether sprintf returns the length of the string
+ *	(as per the ANSI spec). Some C libraries retain compatibility with
+ *	pre-ANSI C and return a pointer to the passed in buffer; for these
+ *	this variable will be undef.
+ */
+#define SPRINTF_RETURNS_STRLEN	/**/
+
+/* HAS_SQRTL:
+ *	This symbol, if defined, indicates that the sqrtl routine is
+ *	available to do long double square roots.
+ */
+/*#define HAS_SQRTL		/**/
+
+/* HAS_SETRESGID_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the setresgid() function.  Otherwise, it is up
+ *	to the program to supply one.  Good guesses are
+ *		extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
+ */
+/*#define	HAS_SETRESGID_PROTO	/**/
+
+/* HAS_SETRESUID_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the setresuid() function.  Otherwise, it is up
+ *	to the program to supply one.  Good guesses are
+ *		extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
+ */
+/*#define	HAS_SETRESUID_PROTO	/**/
+
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	does have the f_flags member containing the mount flags of
+ *	the filesystem containing the file.
+ *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
+ *	have statfs() and struct statfs, they have ustat() and getmnt()
+ *	with struct ustat and struct fs_data.
+ */
+/*#define HAS_STRUCT_STATFS_F_FLAGS		/**/
+
+/* HAS_STRUCT_STATFS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_STATFS	/**/
+
+/* HAS_FSTATVFS:
+ *	This symbol, if defined, indicates that the fstatvfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATVFS		/**/
 
 /* HAS_STRFTIME:
  *	This symbol, if defined, indicates that the strftime routine is
@@ -3123,13 +3884,13 @@
  *	This symbol, if defined, indicates that the strlcat () routine is
  *	available to do string concatenation.
  */
-/*#define HAS_STRLCAT			/**/
+/*#define HAS_STRLCAT		/**/
 
 /* HAS_STRLCPY:
  *	This symbol, if defined, indicates that the strlcpy () routine is
  *	available to do string copying.
  */
-/*#define HAS_STRLCPY			/**/
+/*#define HAS_STRLCPY		/**/
 
 /* HAS_STRTOLD:
  *	This symbol, if defined, indicates that the strtold routine is
@@ -3149,12 +3910,6 @@
  */
 /*#define HAS_STRTOQ		/**/
 
-/* HAS_STRTOUL:
- *	This symbol, if defined, indicates that the strtoul routine is
- *	available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL	/**/
-
 /* HAS_STRTOULL:
  *	This symbol, if defined, indicates that the strtoull routine is
  *	available to convert strings to unsigned long longs.
@@ -3184,50 +3939,6 @@
  */
 #define	HAS_TELLDIR_PROTO	/**/
 
-/* HAS_TIME:
- *	This symbol, if defined, indicates that the time() routine exists.
- */
-/* Time_t:
- *	This symbol holds the type returned by time(). It can be long,
- *	or time_t on BSD sites (in which case <sys/types.h> should be
- *	included).
- */
-#define HAS_TIME		/**/
-#define Time_t time_t		/* Time type */
-
-/* HAS_TIMES:
- *	This symbol, if defined, indicates that the times() routine exists.
- *	Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES		/**/
-
-/* HAS_TMPNAM_R:
- *	This symbol, if defined, indicates that the tmpnam_r routine
- *	is available to tmpnam re-entrantly.
- */
-/* TMPNAM_R_PROTO:
- *	This symbol encodes the prototype of tmpnam_r.
- *	It is zero if d_tmpnam_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
- *	is defined.
- */
-/*#define HAS_TMPNAM_R	   /**/
-#define TMPNAM_R_PROTO 0	   /**/
-
-/* HAS_TTYNAME_R:
- *	This symbol, if defined, indicates that the ttyname_r routine
- *	is available to ttyname re-entrantly.
- */
-/* TTYNAME_R_PROTO:
- *	This symbol encodes the prototype of ttyname_r.
- *	It is zero if d_ttyname_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
- *	is defined.
- */
-/*#define HAS_TTYNAME_R	   /**/
-#define TTYNAME_R_PROTO 0	   /**/
-
 /* U32_ALIGNMENT_REQUIRED:
  *	This symbol, if defined, indicates that you must access
  *	character data through U32-aligned pointers.
@@ -3242,28 +3953,6 @@
  */
 /*#define HAS_UALARM		/**/
 
-/* HAS_UNION_SEMUN:
- *	This symbol, if defined, indicates that the union semun is
- *	defined by including <sys/sem.h>.  If not, the user code
- *	probably needs to define it as:
- *	union semun {
- *	    int val;
- *	    struct semid_ds *buf;
- *	    unsigned short *array;
- *	}
- */
-/* USE_SEMCTL_SEMUN:
- *	This symbol, if defined, indicates that union semun is
- *	used for semctl IPC_STAT.
- */
-/* USE_SEMCTL_SEMID_DS:
- *	This symbol, if defined, indicates that struct semid_ds * is
- *	used for semctl IPC_STAT.
- */
-#define HAS_UNION_SEMUN	/**/
-/*#define USE_SEMCTL_SEMUN	/**/
-/*#define USE_SEMCTL_SEMID_DS	/**/
-
 /* HAS_UNORDERED:
  *	This symbol, if defined, indicates that the unordered routine is
  *	available to check whether two doubles are unordered
@@ -3291,39 +3980,6 @@
  */
 /*#define HAS_USTAT		/**/
 
-/* HAS_VFORK:
- *	This symbol, if defined, indicates that vfork() exists.
- */
-/*#define HAS_VFORK	/**/
-
-/* HAS_PSEUDOFORK:
- *	This symbol, if defined, indicates that an emulation of the
- *	fork routine is available.
- */
-/*#define HAS_PSEUDOFORK	/**/
-
-/* Signal_t:
- *	This symbol's value is either "void" or "int", corresponding to the
- *	appropriate return type of a signal handler.  Thus, you can declare
- *	a signal handler using "Signal_t (*handler)()", and define the
- *	handler using "Signal_t handler(sig)".
- */
-#define Signal_t void	/* Signal handler's return type */
-
-/* HAS_VPRINTF:
- *	This symbol, if defined, indicates that the vprintf routine is available
- *	to printf with a pointer to an argument list.  If unavailable, you
- *	may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- *	This symbol is defined if this system has vsprintf() returning type
- *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
- *	is up to the package author to declare vsprintf correctly based on the
- *	symbol.
- */
-#define HAS_VPRINTF	/**/
-/*#define USE_CHAR_VSPRINTF 	/**/
-
 /* HAS_WRITEV:
  *	This symbol, if defined, indicates that the writev routine is
  *	available to do scatter writes.
@@ -3336,18 +3992,6 @@
  */
 #define USE_DYNAMIC_LOADING		/**/
 
-/* DOUBLESIZE:
- *	This symbol contains the size of a double, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define DOUBLESIZE 8		/**/
-
-/* EBCDIC:
- *     This symbol, if defined, indicates that this system uses
- *	EBCDIC encoding.
- */
-/*#define	EBCDIC 		/**/
-
 /* FFLUSH_NULL:
  *	This symbol, if defined, tells that fflush(NULL) does flush
  *	all pending stdio output.
@@ -3362,50 +4006,11 @@
 #define	FFLUSH_NULL 		/**/
 /*#define	FFLUSH_ALL 		/**/
 
-/* Fpos_t:
- *	This symbol holds the type used to declare file positions in libc.
- *	It can be fpos_t, long, uint, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t		/* File position type */
-
-/* Gid_t_f:
- *	This symbol defines the format string used for printing a Gid_t.
- */
-#define	Gid_t_f		"ld"		/**/
-
-/* Gid_t_sign:
- *	This symbol holds the signedess of a Gid_t.
- *	1 for unsigned, -1 for signed.
- */
-#define Gid_t_sign	-1		/* GID sign */
-
-/* Gid_t_size:
- *	This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4		/* GID size */
-
-/* Gid_t:
- *	This symbol holds the return type of getgid() and the type of
- *	argument to setrgid() and related functions.  Typically,
- *	it is the type of group ids in the kernel. It can be int, ushort,
- *	gid_t, etc... It may be necessary to include <sys/types.h> to get
- *	any typedef'ed information.
- */
-#define Gid_t gid_t		/* Type for getgid(), etc... */
-
-/* Groups_t:
- *	This symbol holds the type used for the second argument to
- *	getgroups() and setgroups().  Usually, this is the same as
- *	gidtype (gid_t) , but sometimes it isn't.
- *	It can be int, ushort, gid_t, etc... 
- *	It may be necessary to include <sys/types.h> to get any 
- *	typedef'ed information.  This is only required if you have
- *	getgroups() or setgroups()..
+/* I_ASSERT:
+ *	This symbol, if defined, indicates that <assert.h> exists and
+ *	could be included by the C program to get the assert() macro.
  */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t	/* Type for 2nd arg to [sg]etgroups() */
-#endif
+#define	I_ASSERT		/**/
 
 /* I_CRYPT:
  *	This symbol, if defined, indicates that <crypt.h> exists and
@@ -3455,17 +4060,6 @@
  */
 /*#define	I_FP_CLASS		/**/
 
-/* I_GRP:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <grp.h>.
- */
-/* GRPASSWD:
- *	This symbol, if defined, indicates to the C program that struct group
- *	in <grp.h> contains gr_passwd.
- */
-/*#define I_GRP		/**/
-/*#define GRPASSWD	/**/
-
 /* I_IEEEFP:
  *	This symbol, if defined, indicates that <ieeefp.h> exists and
  *	should be included.
@@ -3490,30 +4084,12 @@
  */
 /*#define	I_LIBUTIL		/**/
 
-/* I_MACH_CTHREADS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <mach/cthreads.h>.
- */
-/*#define   I_MACH_CTHREADS	/**/
-
 /* I_MNTENT:
  *	This symbol, if defined, indicates that <mntent.h> exists and
  *	should be included.
  */
 /*#define	I_MNTENT		/**/
 
-/* I_NDBM:
- *	This symbol, if defined, indicates that <ndbm.h> exists and should
- *	be included.
- */
-/*#define I_NDBM	/**/
-
-/* I_NETDB:
- *	This symbol, if defined, indicates that <netdb.h> exists and
- *	should be included.
- */
-/*#define I_NETDB		/**/
-
 /* I_NETINET_TCP:
  *     This symbol, if defined, indicates to the C program that it should
  *     include <netinet/tcp.h>.
@@ -3532,58 +4108,6 @@
  */
 /*#define	I_PROT		/**/
 
-/* I_PTHREAD:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <pthread.h>.
- */
-/*#define   I_PTHREAD	/**/
-
-/* I_PWD:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <pwd.h>.
- */
-/* PWQUOTA:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_quota.
- */
-/* PWAGE:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_age.
- */
-/* PWCHANGE:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_change.
- */
-/* PWCLASS:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_class.
- */
-/* PWEXPIRE:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_expire.
- */
-/* PWCOMMENT:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_comment.
- */
-/* PWGECOS:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_gecos.
- */
-/* PWPASSWD:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_passwd.
- */
-/*#define I_PWD		/**/
-/*#define PWQUOTA	/**/
-/*#define PWAGE	/**/
-/*#define PWCHANGE	/**/
-/*#define PWCLASS	/**/
-/*#define PWEXPIRE	/**/
-/*#define PWCOMMENT	/**/
-/*#define PWGECOS	/**/
-/*#define PWPASSWD	/**/
-
 /* I_SHADOW:
  *	This symbol, if defined, indicates that <shadow.h> exists and
  *	should be included.
@@ -3631,12 +4155,6 @@
  */
 /*#define	I_SYS_STATVFS		/**/
 
-/* I_SYSUIO:
- *	This symbol, if defined, indicates that <sys/uio.h> exists and
- *	should be included.
- */
-/*#define	I_SYSUIO		/**/
-
 /* I_SYSUTSNAME:
  *	This symbol, if defined, indicates that <sys/utsname.h> exists and
  *	should be included.
@@ -3649,64 +4167,12 @@
  */
 /*#define	I_SYS_VFS		/**/
 
-/* I_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <time.h>.
- */
-/* I_SYS_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- *	This symbol, if defined, indicates to the C program that
- *	the struct tm has a tm_zone field.
- */
-/* HAS_TM_TM_GMTOFF:
- *	This symbol, if defined, indicates to the C program that
- *	the struct tm has a tm_gmtoff field.
- */
-#define I_TIME		/**/
-/*#define I_SYS_TIME		/**/
-/*#define I_SYS_TIME_KERNEL		/**/
-/*#define HAS_TM_TM_ZONE		/**/
-/*#define HAS_TM_TM_GMTOFF		/**/
-
 /* I_USTAT:
  *	This symbol, if defined, indicates that <ustat.h> exists and
  *	should be included.
  */
 /*#define	I_USTAT		/**/
 
-/* I_STDARG:
- *	This symbol, if defined, indicates that <stdarg.h> exists and should
- *	be included.
- */
-/* I_VARARGS:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <varargs.h>.
- */
-#define I_STDARG		/**/
-/*#define I_VARARGS	/**/
-
-/* PERL_INC_VERSION_LIST:
- *	This variable specifies the list of subdirectories in over
- *	which perl.c:incpush() and lib/lib.pm will automatically
- *	search when adding directories to @INC, in a format suitable
- *	for a C initialization string.  See the inc_version_list entry
- *	in Porting/Glossary for more details.
- */
-#define PERL_INC_VERSION_LIST 0		/**/
-
-/* INSTALL_USR_BIN_PERL:
- *	This symbol, if defined, indicates that Perl is to be installed
- * 	also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL	/**/
-
 /* PERL_PRIfldbl:
  *	This symbol, if defined, contains the string used by stdio to
  *	format long doubles (format 'f') for output.
@@ -3728,82 +4194,12 @@
 /*#define PERL_PRIeldbl	"e"	/**/
 /*#define PERL_SCNfldbl	"f"	/**/
 
-/* Off_t:
- *	This symbol holds the type used to declare offsets in the kernel.
- *	It can be int, long, off_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t long		/* <offset> type */
-#define LSEEKSIZE 4		/* <offset> size */
-#define Off_t_size 4	/* <offset> size */
-
 /* PERL_MAD:
  *	This symbol, if defined, indicates that the Misc Attribution
  *	Declaration code should be conditionally compiled.
  */
 /*#define	PERL_MAD		/**/
 
-/* Free_t:
- *	This variable contains the return type of free().  It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- *	This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t void *			/**/
-#define Free_t void			/**/
-
-/* PERL_MALLOC_WRAP:
- *	This symbol, if defined, indicates that we'd like malloc wrap checks.
- */
-#define PERL_MALLOC_WRAP		/**/
-
-/* MYMALLOC:
- *	This symbol, if defined, indicates that we're using our own malloc.
- */
-/*#define MYMALLOC			/**/
-
-/* Mode_t:
- *	This symbol holds the type used to declare file modes 
- *	for systems calls.  It is usually mode_t, but may be
- *	int or unsigned short.  It may be necessary to include <sys/types.h>
- *	to get any typedef'ed information.
- */
-#define Mode_t mode_t	 /* file mode parameter for system calls */
-
-/* VAL_O_NONBLOCK:
- *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- *	non-blocking I/O for the file descriptor. Note that there is no way
- *	back, i.e. you cannot turn it blocking again this way. If you wish to
- *	alternatively switch between blocking and non-blocking, use the
- *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- *	This symbol holds the errno error code set by read() when no data was
- *	present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- *	This symbol holds the return code from read() when no data is present
- *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- *	not defined, then you can't distinguish between no data and EOF by
- *	issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- *	This symbol, if defined, indicates to the C program that a read() on
- *	a non-blocking file descriptor will return 0 on EOF, and not the value
- *	held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
-
 /* NEED_VA_COPY:
  *	This symbol, if defined, indicates that the system stores
  *	the variable argument list datatype, va_list, in a format
@@ -3815,58 +4211,6 @@
  */
 /*#define	NEED_VA_COPY		/**/
 
-/* Netdb_host_t:
- *	This symbol holds the type used for the 1st argument
- *	to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- *	This symbol holds the type used for the 2nd argument
- *	to gethostbyaddr().
- */
-/* Netdb_name_t:
- *	This symbol holds the type used for the argument to
- *	gethostbyname().
- */
-/* Netdb_net_t:
- *	This symbol holds the type used for the 1st argument to
- *	getnetbyaddr().
- */
-#define Netdb_host_t		char * /**/
-#define Netdb_hlen_t		int /**/
-#define Netdb_name_t		char * /**/
-#define Netdb_net_t		long /**/
-
-/* PERL_OTHERLIBDIRS:
- *	This variable contains a colon-separated set of paths for the perl
- *	binary to search for additional library files or modules.
- *	These directories will be tacked to the end of @INC.
- *	Perl will automatically search below each path for version-
- *	and architecture-specific directories.  See PERL_INC_VERSION_LIST
- *	for more details.
- */
-/*#define PERL_OTHERLIBDIRS ""		/**/
-
-/* HAS_QUAD:
- *	This symbol, if defined, tells that there's a 64-bit integer type,
- *	Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- *	of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
- */
-/*#define HAS_QUAD	/**/
-#ifdef HAS_QUAD
-#   ifndef _MSC_VER
-#	define Quad_t long long	/**/
-#	define Uquad_t unsigned long long	/**/
-#   else
-#	define Quad_t __int64	/**/
-#	define Uquad_t unsigned __int64	/**/
-#   endif
-#   define QUADKIND 5	/**/
-#   define QUAD_IS_INT	1
-#   define QUAD_IS_LONG	2
-#   define QUAD_IS_LONG_LONG	3
-#   define QUAD_IS_INT64_T	4
-#endif
-
 /* IVTYPE:
  *	This symbol defines the C type used for Perl's IV.
  */
@@ -3941,13 +4285,13 @@
  *	This symbol contains the number of bits a variable of type NVTYPE
  *	can preserve of a variable of type UVTYPE.
  */
-/* NV_OVERFLOWS_INTEGERS_AT
+/* NV_OVERFLOWS_INTEGERS_AT:
  *	This symbol gives the largest integer value that NVs can hold. This
  *	value + 1.0 cannot be stored accurately. It is expressed as constant
  *	floating point expression to reduce the chance of decimale/binary
  *	conversion issues. If it can not be determined, the value 0 is given.
  */
-/* NV_ZERO_IS_ALLBITS_ZERO
+/* NV_ZERO_IS_ALLBITS_ZERO:
  *	This symbol, if defined, indicates that a variable of type NVTYPE
  *	stores 0.0 in memory as all bits zero.
  */
@@ -3985,8 +4329,8 @@
 #define	NV_PRESERVES_UV
 #define	NV_PRESERVES_UV_BITS	32
 #define	NV_OVERFLOWS_INTEGERS_AT	256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
-#define NV_ZERO_IS_ALLBITS_ZERO
-#if 4 == 8
+#define	NV_ZERO_IS_ALLBITS_ZERO
+#if UVSIZE == 8
 #   ifdef BYTEORDER
 #       if BYTEORDER == 0x1234
 #           undef BYTEORDER
@@ -4041,77 +4385,6 @@
 #define	NVff		"f"		/**/
 #define	NVgf		"g"		/**/
 
-/* Pid_t:
- *	This symbol holds the type used to declare process ids in the kernel.
- *	It can be int, uint, pid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t int		/* PID type */
-
-/* PRIVLIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- *	This symbol contains the ~name expanded version of PRIVLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "c:\\perl\\5.11.0\\lib"		/**/
-#define PRIVLIB_EXP (win32_get_privlib("5.11.0"))	/**/
-
-/* CAN_PROTOTYPE:
- *	If defined, this macro indicates that the C compiler can handle
- *	function prototypes.
- */
-/* _:
- *	This macro is used to declare function parameters for folks who want
- *	to make declarations with prototypes using a different style than
- *	the above macros.  Use double parentheses.  For example:
- *
- *		int main _((int argc, char *argv[]));
- */
-#define	CAN_PROTOTYPE	/**/
-#ifdef CAN_PROTOTYPE
-#define	_(args) args
-#else
-#define	_(args) ()
-#endif
-
-/* PTRSIZE:
- *	This symbol contains the size of a pointer, so that the C preprocessor
- *	can make decisions based on it.  It will be sizeof(void *) if
- *	the compiler supports (void *); otherwise it will be
- *	sizeof(char *).
- */
-#define PTRSIZE 4		/**/
-
-/* Drand01:
- *	This macro is to be used to generate uniformly distributed
- *	random numbers over the range [0., 1.[.  You may have to supply
- *	an 'extern double drand48();' in your program since SunOS 4.1.3
- *	doesn't provide you with anything relevant in its headers.
- *	See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- *	This symbol defines the type of the argument of the
- *	random seed function.
- */
-/* seedDrand01:
- *	This symbol defines the macro to be used in seeding the
- *	random number generator (see Drand01).
- */
-/* RANDBITS:
- *	This symbol indicates how many bits are produced by the
- *	function used to generate normalized random numbers.
- *	Values include 15, 16, 31, and 48.
- */
-#define Drand01()		(rand()/(double)((unsigned)1<<RANDBITS))		/**/
-#define Rand_seed_t		unsigned		/**/
-#define seedDrand01(x)	srand((Rand_seed_t)x)	/**/
-#define RANDBITS		15		/**/
-
 /* SELECT_MIN_BITS:
  *	This symbol holds the minimum number of bits operated by select.
  *	That is, if you do select(n, ...), how many bits at least will be
@@ -4121,134 +4394,6 @@
  */
 #define SELECT_MIN_BITS 	32	/**/
 
-/* Select_fd_set_t:
- *	This symbol holds the type used for the 2nd, 3rd, and 4th
- *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
- *	is defined, and 'int *' otherwise.  This is only useful if you 
- *	have select(), of course.
- */
-#define Select_fd_set_t 	Perl_fd_set *	/**/
-
-/* SH_PATH:
- *	This symbol contains the full pathname to the shell used on this
- *	on this system to execute Bourne shell scripts.  Usually, this will be
- *	/bin/sh, though it's possible that some systems will have /bin/ksh,
- *	/bin/pdksh, /bin/ash, /bin/bash, or even something such as
- *	D:/bin/sh.exe.
- */
-#define SH_PATH "cmd /x /c"  /**/
-
-/* SIG_NAME:
- *	This symbol contains a list of signal names in order of
- *	signal number. This is intended
- *	to be used as a static array initialization, like this:
- *		char *sig_name[] = { SIG_NAME };
- *	The signals in the list are separated with commas, and each signal
- *	is surrounded by double quotes. There is no leading SIG in the signal
- *	name, i.e. SIGQUIT is known as "QUIT".
- *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- *	etc., where nn is the actual signal number (e.g. NUM37).
- *	The signal number for sig_name[i] is stored in sig_num[i].
- *	The last element is 0 to terminate the list with a NULL.  This
- *	corresponds to the 0 at the end of the sig_name_init list.
- *	Note that this variable is initialized from the sig_name_init,
- *	not from sig_name (which is unused).
- */
-/* SIG_NUM:
- *	This symbol contains a list of signal numbers, in the same order as the
- *	SIG_NAME list. It is suitable for static array initialization, as in:
- *		int sig_num[] = { SIG_NUM };
- *	The signals in the list are separated with commas, and the indices
- *	within that list and the SIG_NAME list match, so it's easy to compute
- *	the signal name from a number or vice versa at the price of a small
- *	dynamic linear lookup. 
- *	Duplicates are allowed, but are moved to the end of the list.
- *	The signal number corresponding to sig_name[i] is sig_number[i].
- *	if (i < NSIG) then sig_number[i] == i.  
- *	The last element is 0, corresponding to the 0 at the end of
- *	the sig_name_init list.
- *	Note that this variable is initialized from the sig_num_init,
- *	not from sig_num (which is unused).
- */
-/* SIG_SIZE:
- *	This variable contains the number of elements of the SIG_NAME
- *	and SIG_NUM arrays, excluding the final NULL entry.
- */
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0		/**/
-#define SIG_NUM  0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0		/**/
-#define SIG_SIZE 27			/**/
-
-/* SITEARCH:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-dependent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITEARCH_EXP:
- *	This symbol contains the ~name expanded version of SITEARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITEARCH "c:\\perl\\site\\5.11.0\\lib\\MSWin32-x86"		/**/
-/*#define SITEARCH_EXP ""	/**/
-
-/* SITELIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-independent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITELIB_EXP:
- *	This symbol contains the ~name expanded version of SITELIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* SITELIB_STEM:
- *	This define is SITELIB_EXP with any trailing version-specific component
- *	removed.  The elements in inc_version_list (inc_version_list.U) can
- *	be tacked onto this variable to generate a list of directories to search.
- */
-#define SITELIB "c:\\perl\\site\\5.11.0\\lib"		/**/
-#define SITELIB_EXP (win32_get_sitelib("5.11.0"))	/**/
-#define SITELIB_STEM ""		/**/
-
-/* Size_t_size:
- *	This symbol holds the size of a Size_t in bytes.
- */
-#define Size_t_size 4		/**/
-
-/* Size_t:
- *	This symbol holds the type used to declare length parameters
- *	for string functions.  It is usually size_t, but may be
- *	unsigned long, int, etc.  It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t	 /* length paramater for string functions */
-
-/* Sock_size_t:
- *	This symbol holds the type used for the size argument of
- *	various socket calls (just the base type, not the pointer-to).
- */
-#define Sock_size_t		int /**/
-
-/* SSize_t:
- *	This symbol holds the type used by functions that return
- *	a count of bytes or an error condition.  It must be a signed type.
- *	It is usually ssize_t, but may be long or int, etc.
- *	It may be necessary to include <sys/types.h> or <unistd.h>
- *	to get any typedef'ed information.
- *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t int	 /* signed count of bytes */
-
 /* STARTPERL:
  *	This variable contains the string to put in front of a perl
  *	script to make sure (one hopes) that it runs with perl and not
@@ -4256,12 +4401,6 @@
  */
 #define STARTPERL "#!perl"		/**/
 
-/* STDCHAR:
- *	This symbol is defined to be the type of char used in stdio.h.
- *	It has the values "unsigned char" or "char".
- */
-#define STDCHAR char	/**/
-
 /* HAS_STDIO_STREAM_ARRAY:
  *	This symbol, if defined, tells that there is an array
  *	holding the stdio streams.
@@ -4271,30 +4410,9 @@
  *	Usual values include _iob, __iob, and __sF.
  */
 /*#define	HAS_STDIO_STREAM_ARRAY	/**/
+#ifdef HAS_STDIO_STREAM_ARRAY
 #define STDIO_STREAM_ARRAY	
-
-/* Uid_t_f:
- *	This symbol defines the format string used for printing a Uid_t.
- */
-#define	Uid_t_f		"ld"		/**/
-
-/* Uid_t_sign:
- *	This symbol holds the signedess of a Uid_t.
- *	1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign	-1		/* UID sign */
-
-/* Uid_t_size:
- *	This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4		/* UID size */
-
-/* Uid_t:
- *	This symbol holds the type used to declare user ids in the kernel.
- *	It can be int, ushort, uid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t		/* UID type */
+#endif
 
 /* USE_64_BIT_INT:
  *	This symbol, if defined, indicates that 64-bit integers should
@@ -4317,18 +4435,23 @@
 #ifndef USE_64_BIT_INT
 /*#define	USE_64_BIT_INT		/**/
 #endif
-
 #ifndef USE_64_BIT_ALL
 /*#define	USE_64_BIT_ALL		/**/
 #endif
 
+/* USE_DTRACE:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built with support for DTrace.
+ */
+/*#define USE_DTRACE		/**/
+
 /* USE_FAST_STDIO:
  *	This symbol, if defined, indicates that Perl should
  *	be built to use 'fast stdio'.
  *	Defaults to define in Perls 5.8 and earlier, to undef later.
  */
 #ifndef USE_FAST_STDIO
-/*#define	USE_FAST_STDIO		/ **/
+/*#define	USE_FAST_STDIO		/**/
 #endif
 
 /* USE_LARGE_FILES:
@@ -4380,97 +4503,4 @@
 /*#define	USE_SOCKS		/**/
 #endif
 
-/* USE_ITHREADS:
- *	This symbol, if defined, indicates that Perl should be built to
- *	use the interpreter-based threading implementation.
- */
-/* USE_5005THREADS:
- *	This symbol, if defined, indicates that Perl should be built to
- *	use the 5.005-based threading implementation.
- */
-/* OLD_PTHREADS_API:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use the old draft POSIX threads API.
- */
-/* USE_REENTRANT_API:
- *	This symbol, if defined, indicates that Perl should
- *	try to use the various _r versions of library functions.
- *	This is extremely experimental.
- */
-/*#define	USE_5005THREADS		/**/
-/*#define	USE_ITHREADS		/**/
-#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define		USE_THREADS		/* until src is revised*/
-#endif
-/*#define	OLD_PTHREADS_API		/**/
-/*#define	USE_REENTRANT_API	/**/
-
-/* USE_DTRACE
- *	This symbol, if defined, indicates that Perl should
- *	be built with support for DTrace.
- */
-/*#define USE_DTRACE			/ **/
-
-/* PERL_VENDORARCH:
- *	If defined, this symbol contains the name of a private library.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.
- *	It may have a ~ on the front.
- *	The standard distribution will put nothing in this directory.
- *	Vendors who distribute perl may wish to place their own
- *	architecture-dependent modules and extensions in this directory with
- *		MakeMaker Makefile.PL INSTALLDIRS=vendor
- *	or equivalent.  See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- *	This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define PERL_VENDORARCH ""		/**/
-/*#define PERL_VENDORARCH_EXP ""		/**/
-
-/* PERL_VENDORLIB_EXP:
- *	This symbol contains the ~name expanded version of VENDORLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- *	This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- *	removed.  The elements in inc_version_list (inc_version_list.U) can
- *	be tacked onto this variable to generate a list of directories to search.
- */
-/*#define PERL_VENDORLIB_EXP ""		/**/
-/*#define PERL_VENDORLIB_STEM ""		/**/
-
-/* VOIDFLAGS:
- *	This symbol indicates how much support of the void type is given by this
- *	compiler.  What various bits mean:
- *
- *	    1 = supports declaration of void
- *	    2 = supports arrays of pointers to functions returning void
- *	    4 = supports comparisons between pointers to void functions and
- *		    addresses of void functions
- *	    8 = suports declaration of generic void pointers
- *
- *	The package designer should define VOIDUSED to indicate the requirements
- *	of the package.  This can be done either by #defining VOIDUSED before
- *	including config.h, or by defining defvoidused in Myinit.U.  If the
- *	latter approach is taken, only those flags will be tested.  If the
- *	level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int		/* is void to be avoided? */
-#define M_VOID			/* Xenix strikes again */
-#endif
-
-/* HAS_POLL:
- *	This symbol, if defined, indicates that the poll routine is
- *	available to poll active file descriptors. You may safely
- *	include <poll.h> when both this symbol *and* I_POLL are defined.
- */
-/*#define HAS_POLL		/**/
-
 #endif