diff options
author | Gurusamy Sarathy <gsar@cpan.org> | 2001-07-02 06:25:22 +0000 |
---|---|---|
committer | Gurusamy Sarathy <gsar@cpan.org> | 2001-07-02 06:25:22 +0000 |
commit | f341dd84acf9fcf54aaae4728b96117b8fa43aea (patch) | |
tree | 33420c484dde2c0786124d547ea20a7b13d09f88 /win32/makefile.mk | |
parent | f5eac2152adebf3de703707e233f00e2cd249b47 (diff) | |
download | perl-f341dd84acf9fcf54aaae4728b96117b8fa43aea.tar.gz |
win32 tweaks: remove extra CRs from makefile.mk; move mdelete.bat
from win32/bin (or it gets deleted by distclean); don't delete
lib/Cwd.pm during distclean; mdelete.bat doesn't work properly on
NT (should be made Win9x specific, and added to makefile.mk)
p4raw-id: //depot/perl@11064
Diffstat (limited to 'win32/makefile.mk')
-rw-r--r-- | win32/makefile.mk | 2532 |
1 files changed, 1266 insertions, 1266 deletions
diff --git a/win32/makefile.mk b/win32/makefile.mk index f99b4ce668..142bc2e6a7 100644 --- a/win32/makefile.mk +++ b/win32/makefile.mk @@ -1,1266 +1,1266 @@ -#
-# Makefile to build perl on Windows NT using DMAKE.
-# Supported compilers:
-# Visual C++ 2.0 thro 6.0
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll). Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration. Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "dmake install" to put your
-# newly built perl.
-#
-INST_DRV *= c:
-INST_TOP *= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location. Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to. If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER *= \5.7.1
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components. This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files. Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location. Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH *= \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
-#
-USE_MULTI *= define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
-#
-USE_ITHREADS *= define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
-#
-USE_IMP_SYS *= define
-
-#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS *= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT *= define
-
-#
-# uncomment exactly one of the following
-#
-# Visual C++ 2.x
-#CCTYPE *= MSVC20
-# Visual C++ > 2.x and < 6.x
-#CCTYPE *= MSVC
-# Visual C++ >= 6.x
-CCTYPE *= MSVC60
-# Borland 5.02 or later
-#CCTYPE *= BORLAND
-# mingw32+gcc-2.95.2 or better
-#CCTYPE *= GCC
-
-#
-# uncomment this if your Borland compiler is older than v5.4.
-BCCOLD = define
-#
-# uncomment this if you want to use Borland's VCL as your CRT
-#BCCVCL = define
-
-#
-# uncomment this if you are compiling under Windows 95/98 and command.com
-# (not needed if you're running under 4DOS/NT 6.01 or later)
-#IS_WIN95 *= define
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-# If not enabled, we automatically try to use maximum optimization
-# with all compilers that are known to have a working optimizer.
-#
-CFG *= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT *= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful. This option is supported only with
-# Visual C.
-#
-#USE_SETARGV *= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC *= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB *= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all
-# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC *= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME *= F:\borland\bc5
-CCHOME *= $(MSVCDIR)
-#CCHOME *= c:\gcc-2.95.2
-CCINCDIR *= $(CCHOME)\include
-CCLIBDIR *= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution. You most
-# probably just want to build modules that won't compile with
-# perl Makefile.PL POLLUTE=1
-# instead of enabling this. Please report such modules to the respective
-# authors.
-#
-#BUILDOPT += -DPERL_POLLUTE
-
-#
-# This should normally be disabled. Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT += -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS *=
-
-#
-# set this to point to cmd.exe (only needed if you use some
-# alternate shell that doesn't grok cmd.exe style commands)
-#
-#SHELL *= g:\winnt\system32\cmd.exe
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL *=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-.ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC != undef
-USE_5005THREADS != undef
-USE_MULTI != undef
-USE_IMP_SYS != define
-.ENDIF
-
-PERL_MALLOC *= undef
-
-USE_5005THREADS *= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS != undef
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC != undef
-.ENDIF
-
-USE_MULTI *= undef
-USE_OBJECT *= undef
-USE_ITHREADS *= undef
-USE_IMP_SYS *= undef
-USE_PERLIO *= undef
-USE_PERLCRT *= undef
-
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI != define
-.ENDIF
-
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI != define
-USE_5005THREADS != undef
-.ENDIF
-
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT += -DPERL_IMPLICIT_CONTEXT
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT += -DPERL_IMPLICIT_SYS
-.ENDIF
-
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
-
-PROCESSOR_ARCHITECTURE *= x86
-
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-.ELSE
-.IF "$(USE_PERLIO)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
-.ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-
-.IF "$(USE_ITHREADS)" == "define"
-ARCHNAME !:= $(ARCHNAME)-thread
-.ENDIF
-
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-.IF "$(CFG)" == "Debug"
-.ELSE
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
-.ENDIF
-.ENDIF
-
-ARCHDIR = ..\lib\$(ARCHNAME)
-COREDIR = ..\lib\CORE
-AUTODIR = ..\lib\auto
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_TOP)$(INST_VER)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-.USESHELL :
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CC = bcc32
-.IF "$(BCCOLD)" != "define"
-LINK32 = ilink32
-.ELSE
-LINK32 = tlink32
-.ENDIF
-LIB32 = tlib /P128
-IMPLIB = implib -c
-RSC = rc
-
-#
-# Options
-#
-INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -P
-
-LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
-LINK_DBG = -v
-.ELSE
-OPTIMIZE = -O2 -D_RTLDLL
-LINK_DBG =
-.ENDIF
-
-CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -e
-LIBOUT_FLAG =
-.IF "$(BCCOLD)" != "define"
-LINK_FLAGS += -Gn
-DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
-.END
-.IF "$(BCCVCL)" == "define"
-LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
-LINK_FLAGS += -L"$(CCLIBDIR)\Release"
-.END
-
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CC = gcc
-LINK32 = gcc
-LIB32 = ar rc
-IMPLIB = dlltool
-RSC = rc
-
-i = .i
-o = .o
-a = .a
-
-#
-# Options
-#
-
-INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -xc++
-
-LIBC = -lmsvcrt
-
-# same libs as MSVC
-LIBFILES = $(CRYPT_LIB) $(LIBC) \
- -lmoldname -lkernel32 -luser32 -lgdi32 \
- -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
- -lwinmm -lversion -lodbc32
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -g -O2 -DDEBUGGING
-LINK_DBG = -g
-.ELSE
-OPTIMIZE = -g -O2
-LINK_DBG = -g
-.ENDIF
-
-CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -o
-LIBOUT_FLAG =
-
-# NOTE: we assume that GCC uses MSVCRT.DLL
-BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-
-.ELSE
-
-CC = cl
-LINK32 = link
-LIB32 = $(LINK32) -lib
-RSC = rc
-
-#
-# Options
-#
-
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -TP -GX
-
-.IF "$(USE_PERLCRT)" != "define"
-LIBC = msvcrt.lib
-.ELSE
-LIBC = PerlCRT.lib
-.ENDIF
-
-PERLEXE_RES =
-PERLDLL_RES =
-
-.IF "$(CFG)" == "Debug"
-.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
-LINK_DBG = -debug -pdb:none
-.ELSE
-# -Zi requires .pdb file(s)
-#OPTIMIZE = -Od -MD -Zi -DDEBUGGING
-#LINK_DBG = -debug
-OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING
-LINK_DBG = -debug -debugtype:both -pdb:none
-.ENDIF
-.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
-.ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
-.ENDIF
-LINK_DBG = -release
-.ENDIF
-
-LIBBASEFILES = $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
- -libpath:"$(INST_COREDIR)" \
- -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG = -Fo
-EXEOUT_FLAG = -Fe
-LIBOUT_FLAG = /out:
-
-.IF "$(USE_PERLCRT)" != "define"
-BUILDOPT += -DPERL_MSVCRT_READFIX
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE += $(CXX_FLAG)
-BUILDOPT += -DPERL_OBJECT
-.ENDIF
-
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)
-
-# used to allow local linking flags that are not propogated into Config.pm,
-# currently unused
-# -- BKS, 12-12-1999
-PRIV_LINK_FLAGS *=
-BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o *= .obj
-a *= .lib
-
-LKPRE = INPUT (
-LKPOST = )
-
-#
-# Rules
-#
-
-.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
-
-.c$(o):
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.c.i:
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
-
-.y.c:
- $(NOOP)
-
-$(o).dll:
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
- $(IMPLIB) $(*B).lib $@
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
- $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
-.ELSE
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-.ENDIF
-
-.rc.res:
- $(RSC) -i.. $<
-
-#
-# various targets
-MINIPERL = ..\miniperl.exe
-MINIDIR = .\mini
-PERLEXE = ..\perl.exe
-WPERLEXE = ..\wperl.exe
-GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm
-X2P = ..\x2p\a2p.exe
-
-# Nominate a target which causes extensions to be re-built
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend
-# on and really only the interface - i.e. the .def file used to export symbols
-# from the .dll
-PERLDEP = perldll.def
-
-
-PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
-
-UTILS = \
- ..\utils\h2ph \
- ..\utils\splain \
- ..\utils\dprofpp \
- ..\utils\perlbug \
- ..\utils\pl2pm \
- ..\utils\c2ph \
- ..\utils\h2xs \
- ..\utils\perldoc \
- ..\utils\perlcc \
- ..\pod\checkpods \
- ..\pod\pod2html \
- ..\pod\pod2latex \
- ..\pod\pod2man \
- ..\pod\pod2text \
- ..\pod\pod2usage \
- ..\pod\podchecker \
- ..\pod\podselect \
- ..\x2p\find2perl \
- ..\x2p\s2p \
- bin\exetype.pl \
- bin\runperl.pl \
- bin\pl2bat.pl \
- bin\perlglob.pl \
- bin\search.pl
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CFGSH_TMPL = config.bc
-CFGH_TMPL = config_H.bc
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CFGSH_TMPL = config.gc
-CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl57$(a)
-
-.ELSE
-
-CFGSH_TMPL = config.vc
-CFGH_TMPL = config_H.vc
-
-.ENDIF
-
-# makedef.pl must be updated if this changes, and this should normally
-# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB *= ..\perl57$(a)
-PERLDLL = ..\perl57.dll
-
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
-MICROCORE_SRC = \
- ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\locale.c \
- ..\mg.c \
- ..\numeric.c \
- ..\op.c \
- ..\perl.c \
- ..\perlapi.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_pack.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\utf8.c \
- ..\util.c \
- ..\xsutils.c
-
-EXTRACORE_SRC += perllib.c
-
-.IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC += ..\malloc.c
-.ENDIF
-
-.IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC += ..\perlio.c
-.ENDIF
-
-WIN32_SRC = \
- .\win32.c \
- .\win32io.c \
- .\win32sck.c \
- .\win32thread.c
-
-.IF "$(CRYPT_SRC)" != ""
-WIN32_SRC += .\$(CRYPT_SRC)
-.ENDIF
-
-DLL_SRC = $(DYNALOADER).c
-
-X2P_SRC = \
- ..\x2p\a2p.c \
- ..\x2p\hash.c \
- ..\x2p\str.c \
- ..\x2p\util.c \
- ..\x2p\walk.c
-
-CORE_NOCFG_H = \
- ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\iperlsys.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlapi.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\thread.h \
- ..\unixish.h \
- ..\utf8.h \
- ..\util.h \
- ..\warnings.h \
- ..\XSUB.h \
- ..\EXTERN.h \
- ..\perlvars.h \
- ..\intrpvar.h \
- ..\thrdvar.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h
-
-CORE_H = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
-WIN32_OBJ = $(WIN32_SRC:db:+$(o))
-MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
-MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:db:+$(o))
-X2P_OBJ = $(X2P_SRC:db:+$(o))
-
-PERLDLL_OBJ = $(CORE_OBJ)
-PERLEXE_OBJ = perlmain$(o)
-
-PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
-
-.IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ = setargv$(o)
-.ENDIF
-
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
- Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece
-STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
-# vars must be separated by "\t+~\t+", since we're using the tempfile
-# version of config_sh.pl (we were overflowing someone's buffer by
-# trying to fit them all on the command line)
-# -- BKS 10-17-1999
-CFG_VARS = \
- INST_DRV=$(INST_DRV) ~ \
- INST_TOP=$(INST_TOP:s/\/\\/) ~ \
- INST_VER=$(INST_VER:s/\/\\/) ~ \
- INST_ARCH=$(INST_ARCH) ~ \
- archname=$(ARCHNAME) ~ \
- cc=$(CC) ~ \
- ld=$(LINK32) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
- cf_email=$(EMAIL) ~ \
- d_crypt=$(D_CRYPT) ~ \
- d_mymalloc=$(PERL_MALLOC) ~ \
- libs=$(LIBFILES:f) ~ \
- incpath=$(CCINCDIR:s/\/\\/) ~ \
- libperl=$(PERLIMPLIB:f) ~ \
- libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
- libc=$(LIBC) ~ \
- make=dmake ~ \
- _o=$(o) obj_ext=$(o) ~ \
- _a=$(a) lib_ext=$(a) ~ \
- static_ext=$(STATIC_EXT) ~ \
- use5005threads=$(USE_5005THREADS) ~ \
- useithreads=$(USE_ITHREADS) ~ \
- usethreads=$(USE_5005THREADS) ~ \
- usemultiplicity=$(USE_MULTI) ~ \
- useperlio=$(USE_PERLIO) ~ \
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
- optimize=$(OPTIMIZE)
-
-#
-# set up targets varying between Win95 and WinNT builds
-#
-
-.IF "$(IS_WIN95)" == "define"
-MK2 = .\makefile.95
-RIGHTMAKE = __switch_makefiles
-NOOP = @rem
-.ELSE
-MK2 = __not_needed
-RIGHTMAKE =
-.ENDIF
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) Extensions
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#----------------------------------------------------------------
-
-#-------------------- BEGIN Win95 SPECIFIC ----------------------
-
-# this target is a jump-off point for Win95
-# 1. it switches to the Win95-specific makefile if it exists
-# (__do_switch_makefiles)
-# 2. it prints a message when the Win95-specific one finishes (__done)
-# 3. it then kills this makefile by trying to make __no_such_target
-
-__switch_makefiles: __do_switch_makefiles __done __no_such_target
-
-__do_switch_makefiles:
-.IF "$(NOTFIRST)" != "true"
- if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
-.ELSE
- $(NOOP)
-.ENDIF
-
-.IF "$(NOTFIRST)" != "true"
-__done:
- @echo Build process complete. Ignore any errors after this message.
- @echo Run "dmake test" to test and "dmake install" to install
-
-.ELSE
-# dummy targets for Win95-specific makefile
-
-__done:
- $(NOOP)
-
-__no_such_target:
- $(NOOP)
-
-.ENDIF
-
-# This target is used to generate the new makefile (.\makefile.95) for Win95
-
-.\makefile.95: .\makefile.mk
- $(MINIPERL) genmk95.pl makefile.mk $(MK2)
-
-#--------------------- END Win95 SPECIFIC ---------------------
-
-# a blank target for when builds don't need to do certain things
-# this target added for Win95 port but used to keep the WinNT port able to
-# use this file
-__not_needed:
- $(NOOP)
-
-$(GLOBEXE) : perlglob$(o)
-.IF "$(CCTYPE)" == "BORLAND"
- $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
- "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
-.ELSE
- $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
-.ENDIF
-
-perlglob$(o) : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
- copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
- $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
- $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
- perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
- $(CFGSH_TMPL) > ..\config.sh
- -cd .. && del /f perl.exe
- cd .. && perl configpm
- -del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
-.ENDIF
-
-$(MINIDIR) :
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
-# unless the .IF is true), so instead we use a .ELSE with the default.
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-.ELSE
- $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
-.ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ) : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
-$(X2P_OBJ) : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
- $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
- $(IMPLIB) $*.lib $@
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
- dlltool --output-lib $(PERLIMPLIB) \
- --dllname $(PERLDLL:b).dll \
- --def perldll.def \
- --base-file perl.base \
- --output-exp perl.exp
- $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
- perl.exp $(LKPOST))
-.ELSE
- $(LINK32) -dll -def:perldll.def -out:$@ \
- @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
- $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
-.ENDIF
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
-.ENDIF
-
-perlmain.c : runperl.c
- copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
- $(@:s,\,\\),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
- $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
-.ELSE
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-.ENDIF
- copy $(PERLEXE) $(WPERLEXE)
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
- $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-#----------------------------------------------------------------------------------
-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-
-Extensions_clean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-
-#----------------------------------------------------------------------------------
-
-
-doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
- cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\README.aix ..\pod\perlaix.pod
- copy ..\README.amiga ..\pod\perlamiga.pod
- copy ..\README.apollo ..\pod\perlapollo.pod
- copy ..\README.beos ..\pod\perlbeos.pod
- copy ..\README.bs2000 ..\pod\perlbs2000.pod
- copy ..\README.cygwin ..\pod\perlcygwin.pod
- copy ..\README.dgux ..\pod\perldgux.pod
- copy ..\README.dos ..\pod\perldos.pod
- copy ..\README.epoc ..\pod\perlepoc.pod
- copy ..\README.hpux ..\pod\perlhpux.pod
- copy ..\README.hurd ..\pod\perlhurd.pod
- copy ..\README.machten ..\pod\perlmachten.pod
- copy ..\README.macos ..\pod\perlmacos.pod
- copy ..\README.mint ..\pod\perlmint.pod
- copy ..\README.mpeix ..\pod\perlmpeix.pod
- copy ..\README.netware ..\pod\perlnetware.pod
- copy ..\README.os2 ..\pod\perlos2.pod
- copy ..\README.os390 ..\pod\perlos390.pod
- copy ..\README.plan9 ..\pod\perlplan9.pod
- copy ..\README.qnx ..\pod\perlqnx.pod
- copy ..\README.solaris ..\pod\perlsolaris.pod
- copy ..\README.tru64 ..\pod\perltru64.pod
- copy ..\README.vmesa ..\pod\perlvmesa.pod
- copy ..\vms\perlvms.pod ..\pod\perlvms.pod
- copy ..\README.vos ..\pod\perlvos.pod
- copy ..\README.win32 ..\pod\perlwin32.pod
- cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
- cd ..\lib && $(PERLEXE) lib_pm.PL
- $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
- -del /f *.def *.map
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\PerlIO\Scalar.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\File\Glob.pm
- -del /f $(LIBDIR)\Storable.pm
- -del /f $(LIBDIR)\Filter\Util\Call.pm
- -del /f $(LIBDIR)\Digest\MD5.pm
- -del /f $(LIBDIR)\MIME\Base64.pm
- -del /f $(LIBDIR)\MIME\QuotedPrint.pm
- -del /f $(LIBDIR)\Time\HiRes.pm
- -del /f $(LIBDIR)\List\Util.pm
- -del /f $(LIBDIR)\Scalar\Util.pm
- -del /f $(LIBDIR)\Time\Piece.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
- -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
- -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
- -cd $(PODDIR) && del /f *.html *.bat checkpods \
- perlaix.pod perlamiga.pod perlapollo.pod \
- perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \
- perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
- perlmachten.pod perlmint.pod \
- perlmacos.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod \
- perlplan9.pod perlqnx.pod \
- perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
- podchecker podselect
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- dprofpp *.bat
- -cd ..\x2p && del /f find2perl s2p *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
- -del /f $(CONFIGPM)
- -del /f bin\*.bat
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
- pm_to_blib
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : $(RIGHTMAKE) utils
- $(PERLEXE) ..\installperl
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
- $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
- attrib -r ..\t\*.*
- copy test ..\t
- cd ..\t && \
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-
-test-prep : all utils
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-
-test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
-
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-clean : Extensions_clean
- -@erase miniperlmain$(o)
- -@erase $(MINIPERL)
- -@erase perlglob$(o)
- -@erase perlmain$(o)
- -@erase config.w32
- -@erase /f config.h
- -@erase $(GLOBEXE)
- -@erase $(PERLEXE)
- -@erase $(WPERLEXE)
- -@erase $(PERLDLL)
- -@erase $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
- -@erase $(WIN32_OBJ)
- -@erase $(DLL_OBJ)
- -@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@erase ..\x2p\*.exe ..\x2p\*.bat
- -@erase *.ilk
- -@erase *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "dmake nok" instead.
-ok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+# +# Makefile to build perl on Windows NT using DMAKE. +# Supported compilers: +# Visual C++ 2.0 thro 6.0 +# Borland C++ 5.02 +# Mingw32 with gcc-2.95.2 or better **experimental** +# +# This is set up to build a perl.exe that runs off a shared library +# (perl57.dll). Also makes individual DLLs for the XS extensions. +# + +## +## Make sure you read README.win32 *before* you mess with anything here! +## + +## +## Build configuration. Edit the values below to suit your needs. +## + +# +# Set these to wherever you want "dmake install" to put your +# newly built perl. +# +INST_DRV *= c: +INST_TOP *= $(INST_DRV)\perl + +# +# Comment this out if you DON'T want your perl installation to be versioned. +# This means that the new installation will overwrite any files from the +# old installation at the same INST_TOP location. Leaving it enabled is +# the safest route, as perl adds the extra version directory to all the +# locations it installs files to. If you disable it, an alternative +# versioned installation can be obtained by setting INST_TOP above to a +# path that includes an arbitrary version string. +# +INST_VER *= \5.7.1 + +# +# Comment this out if you DON'T want your perl installation to have +# architecture specific components. This means that architecture- +# specific files will be installed along with the architecture-neutral +# files. Leaving it enabled is safer and more flexible, in case you +# want to build multiple flavors of perl and install them together in +# the same location. Commenting it out gives you a simpler +# installation that is easier to understand for beginners. +# +INST_ARCH *= \$(ARCHNAME) + +# +# uncomment to enable multiple interpreters. This is need for fork() +# emulation. +# +USE_MULTI *= define + +# +# Beginnings of interpreter cloning/threads; still very incomplete. +# This should be enabled to get the fork() emulation. This needs +# USE_MULTI as well. +# +USE_ITHREADS *= define + +# +# uncomment to enable the implicit "host" layer for all system calls +# made by perl. This needs USE_MULTI above. This is also needed to +# get fork(). +# +USE_IMP_SYS *= define + +# +# uncomment to enable the experimental PerlIO I/O subsystem. +USE_PERLIO = define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_ITHREADS instead). +# +# uncomment to enable threads-capabilities. This is incompatible with +# USE_ITHREADS, and is only here for people who may have come to rely +# on the experimental Thread support that was in 5.005. +# +#USE_5005THREADS *= define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_MULTI instead). +# +# uncomment next line if you want to use the PERL_OBJECT build option. +# DO NOT ENABLE unless you have legacy code that relies on the C++ +# CPerlObj class that was available in 5.005. This cannot be enabled +# if you ask for USE_5005THREADS above. +# +#USE_OBJECT *= define + +# +# uncomment exactly one of the following +# +# Visual C++ 2.x +#CCTYPE *= MSVC20 +# Visual C++ > 2.x and < 6.x +#CCTYPE *= MSVC +# Visual C++ >= 6.x +CCTYPE *= MSVC60 +# Borland 5.02 or later +#CCTYPE *= BORLAND +# mingw32+gcc-2.95.2 or better +#CCTYPE *= GCC + +# +# uncomment this if your Borland compiler is older than v5.4. +BCCOLD = define +# +# uncomment this if you want to use Borland's VCL as your CRT +#BCCVCL = define + +# +# uncomment this if you are compiling under Windows 95/98 and command.com +# (not needed if you're running under 4DOS/NT 6.01 or later) +#IS_WIN95 *= define + +# +# uncomment next line if you want debug version of perl (big,slow) +# If not enabled, we automatically try to use maximum optimization +# with all compilers that are known to have a working optimizer. +# +CFG *= Debug + +# +# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. +# It has patches that fix known bugs in older versions of MSVCRT.DLL. +# This currently requires VC 5.0 with Service Pack 3 or later. +# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ +# and follow the directions in the package to install. +# +# Not recommended if you have VC 6.x and you're not running Windows 9x. +# +#USE_PERLCRT *= define + +# +# uncomment to enable linking with setargv.obj under the Visual C +# compiler. Setting this options enables perl to expand wildcards in +# arguments, but it may be harder to use alternate methods like +# File::DosGlob that are more powerful. This option is supported only with +# Visual C. +# +#USE_SETARGV *= define + +# +# if you have the source for des_fcrypt(), uncomment this and make sure the +# file exists (see README.win32). File should be located in the same +# directory as this file. +# +#CRYPT_SRC *= fcrypt.c + +# +# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a +# library, uncomment this, and make sure the library exists (see README.win32) +# Specify the full pathname of the library. +# +#CRYPT_LIB *= fcrypt.lib + +# +# set this if you wish to use perl's malloc +# WARNING: Turning this on/off WILL break binary compatibility with extensions +# you may have compiled with/without it. Be prepared to recompile all +# extensions if you change the default. Currently, this cannot be enabled +# if you ask for USE_IMP_SYS above. +# +#PERL_MALLOC *= define + +# +# set the install locations of the compiler include/libraries +# Running VCVARS32.BAT is *required* when using Visual C. +# Some versions of Visual C don't define MSVCDIR in the environment, +# so you may have to set CCHOME explicitly (spaces in the path name should +# not be quoted) +# +#CCHOME *= F:\borland\bc5 +CCHOME *= $(MSVCDIR) +#CCHOME *= c:\gcc-2.95.2 +CCINCDIR *= $(CCHOME)\include +CCLIBDIR *= $(CCHOME)\lib + +# +# Additional compiler flags can be specified here. +# + +# +# This should normally be disabled. Adding -DPERL_POLLUTE enables support +# for old symbols by default, at the expense of extreme pollution. You most +# probably just want to build modules that won't compile with +# perl Makefile.PL POLLUTE=1 +# instead of enabling this. Please report such modules to the respective +# authors. +# +#BUILDOPT += -DPERL_POLLUTE + +# +# This should normally be disabled. Enabling it will disable the File::Glob +# implementation of CORE::glob. +# +#BUILDOPT += -DPERL_EXTERNAL_GLOB + +# +# This should normally be disabled. Enabling it causes perl to read scripts +# in text mode (which is the 5.005 behavior) and will break ByteLoader. +#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS + +# +# specify semicolon-separated list of extra directories that modules will +# look for libraries (spaces in path names need not be quoted) +# +EXTRALIBDIRS *= + +# +# set this to point to cmd.exe (only needed if you use some +# alternate shell that doesn't grok cmd.exe style commands) +# +#SHELL *= g:\winnt\system32\cmd.exe + +# +# set this to your email address (perl will guess a value from +# from your loginname and your hostname, which may not be right) +# +#EMAIL *= + +## +## Build configuration ends. +## + +##################### CHANGE THESE ONLY IF YOU MUST ##################### + +.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" +D_CRYPT = undef +.ELSE +D_CRYPT = define +CRYPT_FLAG = -DHAVE_DES_FCRYPT +.ENDIF + +.IF "$(USE_OBJECT)" == "define" +PERL_MALLOC != undef +USE_5005THREADS != undef +USE_MULTI != undef +USE_IMP_SYS != define +.ENDIF + +PERL_MALLOC *= undef + +USE_5005THREADS *= undef + +.IF "$(USE_5005THREADS)" == "define" +USE_ITHREADS != undef +.ENDIF + +.IF "$(USE_IMP_SYS)" == "define" +PERL_MALLOC != undef +.ENDIF + +USE_MULTI *= undef +USE_OBJECT *= undef +USE_ITHREADS *= undef +USE_IMP_SYS *= undef +USE_PERLIO *= undef +USE_PERLCRT *= undef + +.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" +USE_MULTI != define +.ENDIF + +.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" +USE_MULTI != define +USE_5005THREADS != undef +.ENDIF + +.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" +BUILDOPT += -DPERL_IMPLICIT_CONTEXT +.ENDIF + +.IF "$(USE_IMP_SYS)" != "undef" +BUILDOPT += -DPERL_IMPLICIT_SYS +.ENDIF + +.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE + +PROCESSOR_ARCHITECTURE *= x86 + +.IF "$(USE_OBJECT)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object +.ELIF "$(USE_5005THREADS)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread +.ELIF "$(USE_MULTI)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi +.ELSE +.IF "$(USE_PERLIO)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio +.ELSE +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +.ENDIF +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +.ENDIF + +.IF "$(USE_ITHREADS)" == "define" +ARCHNAME !:= $(ARCHNAME)-thread +.ENDIF + +# Visual Studio 98 specific +.IF "$(CCTYPE)" == "MSVC60" + +# VC 6.0 can load the socket dll on demand. Makes the test suite +# run in about 10% less time. +DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib + +.IF "$(CFG)" == "Debug" +.ELSE +# VC 6.0 seems capable of compiling perl correctly with optimizations +# enabled. Anything earlier fails tests. +CFG *= Optimize +.ENDIF +.ENDIF + +ARCHDIR = ..\lib\$(ARCHNAME) +COREDIR = ..\lib\CORE +AUTODIR = ..\lib\auto +LIBDIR = ..\lib +EXTDIR = ..\ext +PODDIR = ..\pod +EXTUTILSDIR = $(LIBDIR)\ExtUtils + +# +INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin +INST_BIN = $(INST_SCRIPT)$(INST_ARCH) +INST_LIB = $(INST_TOP)$(INST_VER)\lib +INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) +INST_COREDIR = $(INST_ARCHLIB)\CORE +INST_POD = $(INST_LIB)\pod +INST_HTML = $(INST_TOP)$(INST_VER)\html + +# +# Programs to compile, build .lib files and link +# + +.USESHELL : + +.IF "$(CCTYPE)" == "BORLAND" + +CC = bcc32 +.IF "$(BCCOLD)" != "define" +LINK32 = ilink32 +.ELSE +LINK32 = tlink32 +.ENDIF +LIB32 = tlib /P128 +IMPLIB = implib -c +RSC = rc + +# +# Options +# +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)" +#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch +DEFINES = -DWIN32 $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -P + +LIBC = cw32mti.lib +LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) + +.IF "$(CFG)" == "Debug" +OPTIMIZE = -v -D_RTLDLL -DDEBUGGING +LINK_DBG = -v +.ELSE +OPTIMIZE = -O2 -D_RTLDLL +LINK_DBG = +.ENDIF + +CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" +OBJOUT_FLAG = -o +EXEOUT_FLAG = -e +LIBOUT_FLAG = +.IF "$(BCCOLD)" != "define" +LINK_FLAGS += -Gn +DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410 +.END +.IF "$(BCCVCL)" == "define" +LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib +LINK_FLAGS += -L"$(CCLIBDIR)\Release" +.END + + +.ELIF "$(CCTYPE)" == "GCC" + +CC = gcc +LINK32 = gcc +LIB32 = ar rc +IMPLIB = dlltool +RSC = rc + +i = .i +o = .o +a = .a + +# +# Options +# + +INCLUDES = -I.\include -I. -I.. -I$(COREDIR) +DEFINES = -DWIN32 $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -xc++ + +LIBC = -lmsvcrt + +# same libs as MSVC +LIBFILES = $(CRYPT_LIB) $(LIBC) \ + -lmoldname -lkernel32 -luser32 -lgdi32 \ + -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \ + -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \ + -lwinmm -lversion -lodbc32 + +.IF "$(CFG)" == "Debug" +OPTIMIZE = -g -O2 -DDEBUGGING +LINK_DBG = -g +.ELSE +OPTIMIZE = -g -O2 +LINK_DBG = -g +.ENDIF + +CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) +LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" +OBJOUT_FLAG = -o +EXEOUT_FLAG = -o +LIBOUT_FLAG = + +# NOTE: we assume that GCC uses MSVCRT.DLL +BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX + +.ELSE + +CC = cl +LINK32 = link +LIB32 = $(LINK32) -lib +RSC = rc + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX +DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -TP -GX + +.IF "$(USE_PERLCRT)" != "define" +LIBC = msvcrt.lib +.ELSE +LIBC = PerlCRT.lib +.ENDIF + +PERLEXE_RES = +PERLDLL_RES = + +.IF "$(CFG)" == "Debug" +.IF "$(CCTYPE)" == "MSVC20" +OPTIMIZE = -Od -MD -Z7 -DDEBUGGING +LINK_DBG = -debug -pdb:none +.ELSE +# -Zi requires .pdb file(s) +#OPTIMIZE = -Od -MD -Zi -DDEBUGGING +#LINK_DBG = -debug +OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING +LINK_DBG = -debug -debugtype:both -pdb:none +.ENDIF +.ELSE +.IF "$(CFG)" == "Optimize" +# -O1 yields smaller code, which turns out to be faster than -O2 +#OPTIMIZE = -O2 -MD -DNDEBUG +OPTIMIZE = -O1 -MD -DNDEBUG +.ELSE +OPTIMIZE = -Od -MD -DNDEBUG +.ENDIF +LINK_DBG = -release +.ENDIF + +LIBBASEFILES = $(CRYPT_LIB) \ + oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ + comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ + netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ + version.lib odbc32.lib odbccp32.lib + +# we add LIBC here, since we may be using PerlCRT.dll +LIBFILES = $(LIBBASEFILES) $(LIBC) + +CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ + -libpath:"$(INST_COREDIR)" \ + -machine:$(PROCESSOR_ARCHITECTURE) +OBJOUT_FLAG = -Fo +EXEOUT_FLAG = -Fe +LIBOUT_FLAG = /out: + +.IF "$(USE_PERLCRT)" != "define" +BUILDOPT += -DPERL_MSVCRT_READFIX +.ENDIF + +.ENDIF + +.IF "$(USE_OBJECT)" == "define" +OPTIMIZE += $(CXX_FLAG) +BUILDOPT += -DPERL_OBJECT +.ENDIF + +CFLAGS_O = $(CFLAGS) $(BUILDOPT) + +# used to allow local linking flags that are not propogated into Config.pm, +# currently unused +# -- BKS, 12-12-1999 +PRIV_LINK_FLAGS *= +BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) + +#################### do not edit below this line ####################### +############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## + +o *= .obj +a *= .lib + +LKPRE = INPUT ( +LKPOST = ) + +# +# Rules +# + +.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res + +.c$(o): + $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< + +.c.i: + $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@ + +.y.c: + $(NOOP) + +$(o).dll: +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def + $(IMPLIB) $(*B).lib $@ +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) + $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ +.ELSE + $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ + -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) +.ENDIF + +.rc.res: + $(RSC) -i.. $< + +# +# various targets +MINIPERL = ..\miniperl.exe +MINIDIR = .\mini +PERLEXE = ..\perl.exe +WPERLEXE = ..\wperl.exe +GLOBEXE = ..\perlglob.exe +CONFIGPM = ..\lib\Config.pm +MINIMOD = ..\lib\ExtUtils\Miniperl.pm +X2P = ..\x2p\a2p.exe + +# Nominate a target which causes extensions to be re-built +# This used to be $(PERLEXE), but at worst it is the .dll that they depend +# on and really only the interface - i.e. the .def file used to export symbols +# from the .dll +PERLDEP = perldll.def + + +PL2BAT = bin\pl2bat.pl +GLOBBAT = bin\perlglob.bat + +UTILS = \ + ..\utils\h2ph \ + ..\utils\splain \ + ..\utils\dprofpp \ + ..\utils\perlbug \ + ..\utils\pl2pm \ + ..\utils\c2ph \ + ..\utils\h2xs \ + ..\utils\perldoc \ + ..\utils\perlcc \ + ..\pod\checkpods \ + ..\pod\pod2html \ + ..\pod\pod2latex \ + ..\pod\pod2man \ + ..\pod\pod2text \ + ..\pod\pod2usage \ + ..\pod\podchecker \ + ..\pod\podselect \ + ..\x2p\find2perl \ + ..\x2p\s2p \ + bin\exetype.pl \ + bin\runperl.pl \ + bin\pl2bat.pl \ + bin\perlglob.pl \ + bin\search.pl + +.IF "$(CCTYPE)" == "BORLAND" + +CFGSH_TMPL = config.bc +CFGH_TMPL = config_H.bc + +.ELIF "$(CCTYPE)" == "GCC" + +CFGSH_TMPL = config.gc +CFGH_TMPL = config_H.gc +PERLIMPLIB = ..\libperl57$(a) + +.ELSE + +CFGSH_TMPL = config.vc +CFGH_TMPL = config_H.vc + +.ENDIF + +# makedef.pl must be updated if this changes, and this should normally +# only change when there is an incompatible revision of the public API. +# XXX so why did we change it from perl56 to perl57? +PERLIMPLIB *= ..\perl57$(a) +PERLDLL = ..\perl57.dll + +XCOPY = xcopy /f /r /i /d +RCOPY = xcopy /f /r /i /e /d +NOOP = @echo + +# +# filenames given to xsubpp must have forward slashes (since it puts +# full pathnames in #line strings) +XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ + -C++ -prototypes + +MICROCORE_SRC = \ + ..\av.c \ + ..\deb.c \ + ..\doio.c \ + ..\doop.c \ + ..\dump.c \ + ..\globals.c \ + ..\gv.c \ + ..\hv.c \ + ..\locale.c \ + ..\mg.c \ + ..\numeric.c \ + ..\op.c \ + ..\perl.c \ + ..\perlapi.c \ + ..\perly.c \ + ..\pp.c \ + ..\pp_ctl.c \ + ..\pp_hot.c \ + ..\pp_pack.c \ + ..\pp_sys.c \ + ..\regcomp.c \ + ..\regexec.c \ + ..\run.c \ + ..\scope.c \ + ..\sv.c \ + ..\taint.c \ + ..\toke.c \ + ..\universal.c \ + ..\utf8.c \ + ..\util.c \ + ..\xsutils.c + +EXTRACORE_SRC += perllib.c + +.IF "$(PERL_MALLOC)" == "define" +EXTRACORE_SRC += ..\malloc.c +.ENDIF + +.IF "$(USE_OBJECT)" != "define" +EXTRACORE_SRC += ..\perlio.c +.ENDIF + +WIN32_SRC = \ + .\win32.c \ + .\win32io.c \ + .\win32sck.c \ + .\win32thread.c + +.IF "$(CRYPT_SRC)" != "" +WIN32_SRC += .\$(CRYPT_SRC) +.ENDIF + +DLL_SRC = $(DYNALOADER).c + +X2P_SRC = \ + ..\x2p\a2p.c \ + ..\x2p\hash.c \ + ..\x2p\str.c \ + ..\x2p\util.c \ + ..\x2p\walk.c + +CORE_NOCFG_H = \ + ..\av.h \ + ..\cop.h \ + ..\cv.h \ + ..\dosish.h \ + ..\embed.h \ + ..\form.h \ + ..\gv.h \ + ..\handy.h \ + ..\hv.h \ + ..\iperlsys.h \ + ..\mg.h \ + ..\nostdio.h \ + ..\op.h \ + ..\opcode.h \ + ..\perl.h \ + ..\perlapi.h \ + ..\perlsdio.h \ + ..\perlsfio.h \ + ..\perly.h \ + ..\pp.h \ + ..\proto.h \ + ..\regexp.h \ + ..\scope.h \ + ..\sv.h \ + ..\thread.h \ + ..\unixish.h \ + ..\utf8.h \ + ..\util.h \ + ..\warnings.h \ + ..\XSUB.h \ + ..\EXTERN.h \ + ..\perlvars.h \ + ..\intrpvar.h \ + ..\thrdvar.h \ + .\include\dirent.h \ + .\include\netdb.h \ + .\include\sys\socket.h \ + .\win32.h + +CORE_H = $(CORE_NOCFG_H) .\config.h + +MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o)) +CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o)) +WIN32_OBJ = $(WIN32_SRC:db:+$(o)) +MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)} +MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)} +MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) +DLL_OBJ = $(DLL_SRC:db:+$(o)) +X2P_OBJ = $(X2P_SRC:db:+$(o)) + +PERLDLL_OBJ = $(CORE_OBJ) +PERLEXE_OBJ = perlmain$(o) + +PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) + +.IF "$(USE_SETARGV)" != "" +SETARGV_OBJ = setargv$(o) +.ENDIF + +DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ + Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ + Sys/Hostname Storable Filter/Util/Call Encode \ + Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece +STATIC_EXT = DynaLoader +NONXS_EXT = Errno + +DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader + +POD2HTML = $(PODDIR)\pod2html +POD2MAN = $(PODDIR)\pod2man +POD2LATEX = $(PODDIR)\pod2latex +POD2TEXT = $(PODDIR)\pod2text + +# vars must be separated by "\t+~\t+", since we're using the tempfile +# version of config_sh.pl (we were overflowing someone's buffer by +# trying to fit them all on the command line) +# -- BKS 10-17-1999 +CFG_VARS = \ + INST_DRV=$(INST_DRV) ~ \ + INST_TOP=$(INST_TOP:s/\/\\/) ~ \ + INST_VER=$(INST_VER:s/\/\\/) ~ \ + INST_ARCH=$(INST_ARCH) ~ \ + archname=$(ARCHNAME) ~ \ + cc=$(CC) ~ \ + ld=$(LINK32) ~ \ + ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \ + cf_email=$(EMAIL) ~ \ + d_crypt=$(D_CRYPT) ~ \ + d_mymalloc=$(PERL_MALLOC) ~ \ + libs=$(LIBFILES:f) ~ \ + incpath=$(CCINCDIR:s/\/\\/) ~ \ + libperl=$(PERLIMPLIB:f) ~ \ + libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \ + libc=$(LIBC) ~ \ + make=dmake ~ \ + _o=$(o) obj_ext=$(o) ~ \ + _a=$(a) lib_ext=$(a) ~ \ + static_ext=$(STATIC_EXT) ~ \ + use5005threads=$(USE_5005THREADS) ~ \ + useithreads=$(USE_ITHREADS) ~ \ + usethreads=$(USE_5005THREADS) ~ \ + usemultiplicity=$(USE_MULTI) ~ \ + useperlio=$(USE_PERLIO) ~ \ + LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \ + optimize=$(OPTIMIZE) + +# +# set up targets varying between Win95 and WinNT builds +# + +.IF "$(IS_WIN95)" == "define" +MK2 = .\makefile.95 +RIGHTMAKE = __switch_makefiles +NOOP = @rem +.ELSE +MK2 = __not_needed +RIGHTMAKE = +.ENDIF + +# +# Top targets +# + +all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \ + $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ + $(X2P) Extensions + +$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c + +#---------------------------------------------------------------- + +#-------------------- BEGIN Win95 SPECIFIC ---------------------- + +# this target is a jump-off point for Win95 +# 1. it switches to the Win95-specific makefile if it exists +# (__do_switch_makefiles) +# 2. it prints a message when the Win95-specific one finishes (__done) +# 3. it then kills this makefile by trying to make __no_such_target + +__switch_makefiles: __do_switch_makefiles __done __no_such_target + +__do_switch_makefiles: +.IF "$(NOTFIRST)" != "true" + if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true +.ELSE + $(NOOP) +.ENDIF + +.IF "$(NOTFIRST)" != "true" +__done: + @echo Build process complete. Ignore any errors after this message. + @echo Run "dmake test" to test and "dmake install" to install + +.ELSE +# dummy targets for Win95-specific makefile + +__done: + $(NOOP) + +__no_such_target: + $(NOOP) + +.ENDIF + +# This target is used to generate the new makefile (.\makefile.95) for Win95 + +.\makefile.95: .\makefile.mk + $(MINIPERL) genmk95.pl makefile.mk $(MK2) + +#--------------------- END Win95 SPECIFIC --------------------- + +# a blank target for when builds don't need to do certain things +# this target added for Win95 port but used to keep the WinNT port able to +# use this file +__not_needed: + $(NOOP) + +$(GLOBEXE) : perlglob$(o) +.IF "$(CCTYPE)" == "BORLAND" + $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c + $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \ + "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib, +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) +.ELSE + $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ + perlglob$(o) setargv$(o) +.ENDIF + +perlglob$(o) : perlglob.c + +config.w32 : $(CFGSH_TMPL) + copy $(CFGSH_TMPL) config.w32 + +.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H) + -del /f config.h + copy $(CFGH_TMPL) config.h + +..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm + $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \ + $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh + +# this target is for when changes to the main config.sh happen +# edit config.{b,v,g}c and make this target once for each supported +# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) +regen_config_h: + perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ + $(CFGSH_TMPL) > ..\config.sh + -cd .. && del /f perl.exe + cd .. && perl configpm + -del /f $(CFGH_TMPL) + -mkdir $(COREDIR) + -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" + rename config.h $(CFGH_TMPL) + +$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl + cd .. && miniperl configpm + if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) + $(XCOPY) ..\*.h $(COREDIR)\*.* + $(XCOPY) *.h $(COREDIR)\*.* + $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* + $(RCOPY) include $(COREDIR)\*.* + $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ + || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE) + +$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) +.ELSE + $(LINK32) -subsystem:console -out:$@ \ + @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\)) +.ENDIF + +$(MINIDIR) : + if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" + +$(MINICORE_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c + +$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c + +# -DPERL_IMPLICIT_SYS needs C++ for perllib.c +# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless +# unless the .IF is true), so instead we use a .ELSE with the default. +# This is the only file that depends on perlhost.h, vmem.h, and vdir.h + +perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h +.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" + $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c +.ELSE + $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c +.ENDIF + +# 1. we don't want to rebuild miniperl.exe when config.h changes +# 2. we don't want to rebuild miniperl.exe with non-default config.h +$(MINI_OBJ) : $(CORE_NOCFG_H) + +$(WIN32_OBJ) : $(CORE_H) +$(CORE_OBJ) : $(CORE_H) +$(DLL_OBJ) : $(CORE_H) +$(X2P_OBJ) : $(CORE_H) + +perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl + $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ + $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def + +$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpd -ap $(BLINK_FLAGS) \ + @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \ + $@,\n \ + $(LIBFILES)\n \ + perldll.def\n) + $(IMPLIB) $*.lib $@ +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) + dlltool --output-lib $(PERLIMPLIB) \ + --dllname $(PERLDLL:b).dll \ + --def perldll.def \ + --base-file perl.base \ + --output-exp perl.exp + $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \ + perl.exp $(LKPOST)) +.ELSE + $(LINK32) -dll -def:perldll.def -out:$@ \ + @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \ + $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\)) +.ENDIF + $(XCOPY) $(PERLIMPLIB) $(COREDIR) + +$(MINIMOD) : $(MINIPERL) ..\minimod.pl + cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm + +..\x2p\a2p$(o) : ..\x2p\a2p.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c + +..\x2p\hash$(o) : ..\x2p\hash.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c + +..\x2p\str$(o) : ..\x2p\str.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c + +..\x2p\util$(o) : ..\x2p\util.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c + +..\x2p\walk$(o) : ..\x2p\walk.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c + +$(X2P) : $(MINIPERL) $(X2P_OBJ) + $(MINIPERL) ..\x2p\find2perl.PL + $(MINIPERL) ..\x2p\s2p.PL +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -v -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) +.ELSE + $(LINK32) -subsystem:console -out:$@ \ + @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)) +.ENDIF + +perlmain.c : runperl.c + copy runperl.c perlmain.c + +perlmain$(o) : perlmain.c + $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c + +$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \ + $(@:s,\,\\),\n \ + $(PERLIMPLIB) $(LIBFILES)\n) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ + $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES) +.ELSE + $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \ + $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) +.ENDIF + copy $(PERLEXE) $(WPERLEXE) + $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + +$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) + if not exist $(AUTODIR) mkdir $(AUTODIR) + cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL + cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL + $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) + $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) + cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c + $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c . + +$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs + copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs + +#---------------------------------------------------------------------------------- +Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) + $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) + +Extensions_clean : + -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean + +#---------------------------------------------------------------------------------- + + +doc: $(PERLEXE) + $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ + --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\ + --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse + +utils: $(PERLEXE) $(X2P) + cd ..\utils && $(MAKE) PERL=$(MINIPERL) + copy ..\README.aix ..\pod\perlaix.pod + copy ..\README.amiga ..\pod\perlamiga.pod + copy ..\README.apollo ..\pod\perlapollo.pod + copy ..\README.beos ..\pod\perlbeos.pod + copy ..\README.bs2000 ..\pod\perlbs2000.pod + copy ..\README.cygwin ..\pod\perlcygwin.pod + copy ..\README.dgux ..\pod\perldgux.pod + copy ..\README.dos ..\pod\perldos.pod + copy ..\README.epoc ..\pod\perlepoc.pod + copy ..\README.hpux ..\pod\perlhpux.pod + copy ..\README.hurd ..\pod\perlhurd.pod + copy ..\README.machten ..\pod\perlmachten.pod + copy ..\README.macos ..\pod\perlmacos.pod + copy ..\README.mint ..\pod\perlmint.pod + copy ..\README.mpeix ..\pod\perlmpeix.pod + copy ..\README.netware ..\pod\perlnetware.pod + copy ..\README.os2 ..\pod\perlos2.pod + copy ..\README.os390 ..\pod\perlos390.pod + copy ..\README.plan9 ..\pod\perlplan9.pod + copy ..\README.qnx ..\pod\perlqnx.pod + copy ..\README.solaris ..\pod\perlsolaris.pod + copy ..\README.tru64 ..\pod\perltru64.pod + copy ..\README.vmesa ..\pod\perlvmesa.pod + copy ..\vms\perlvms.pod ..\pod\perlvms.pod + copy ..\README.vos ..\pod\perlvos.pod + copy ..\README.win32 ..\pod\perlwin32.pod + cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters + cd ..\lib && $(PERLEXE) lib_pm.PL + $(PERLEXE) $(PL2BAT) $(UTILS) + +distclean: clean + -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ + $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) + -del /f *.def *.map + -del /f $(EXTDIR)\DynaLoader\dl_win32.xs + -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm + -del /f $(LIBDIR)\XSLoader.pm + -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm + -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm + -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm + -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm + -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm + -del /f $(LIBDIR)\PerlIO\Scalar.pm + -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm + -del /f $(LIBDIR)\File\Glob.pm + -del /f $(LIBDIR)\Storable.pm + -del /f $(LIBDIR)\Filter\Util\Call.pm + -del /f $(LIBDIR)\Digest\MD5.pm + -del /f $(LIBDIR)\MIME\Base64.pm + -del /f $(LIBDIR)\MIME\QuotedPrint.pm + -del /f $(LIBDIR)\Time\HiRes.pm + -del /f $(LIBDIR)\List\Util.pm + -del /f $(LIBDIR)\Scalar\Util.pm + -del /f $(LIBDIR)\Time\Piece.pm + -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO + -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread + -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B + -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data + -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter + -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter + -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest + -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME + -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List + -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar + -cd $(PODDIR) && del /f *.html *.bat checkpods \ + perlaix.pod perlamiga.pod perlapollo.pod \ + perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \ + perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \ + perlmachten.pod perlmint.pod \ + perlmacos.pod perlmpeix.pod perlnetware.pod \ + perlos2.pod perlos390.pod \ + perlplan9.pod perlqnx.pod \ + perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \ + perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ + podchecker podselect + -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \ + dprofpp *.bat + -cd ..\x2p && del /f find2perl s2p *.bat + -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new + -del /f $(CONFIGPM) + -del /f bin\*.bat + -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \ + pm_to_blib + -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) + -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) + +install : all installbare installhtml + +installbare : $(RIGHTMAKE) utils + $(PERLEXE) ..\installperl + if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* + $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* + $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* + +installhtml : doc + $(RCOPY) html\*.* $(INST_HTML)\*.* + +inst_lib : $(CONFIGPM) + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + $(RCOPY) ..\lib $(INST_LIB)\*.* + +minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils + $(XCOPY) $(MINIPERL) ..\t\perl.exe +.IF "$(CCTYPE)" == "BORLAND" + $(XCOPY) $(GLOBBAT) ..\t\$(NULL) +.ELSE + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) +.ENDIF + attrib -r ..\t\*.* + copy test ..\t + cd ..\t && \ + $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t + +test-prep : all utils + $(XCOPY) $(PERLEXE) ..\t\$(NULL) + $(XCOPY) $(PERLDLL) ..\t\$(NULL) +.IF "$(CCTYPE)" == "BORLAND" + $(XCOPY) $(GLOBBAT) ..\t\$(NULL) +.ELSE + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) +.ENDIF + +test : $(RIGHTMAKE) test-prep + cd ..\t && $(PERLEXE) -I..\lib harness + +test-notty : test-prep + set PERL_SKIP_TTY_TEST=1 && \ + cd ..\t && $(PERLEXE) -I.\lib harness + +test-wide : test-prep + set HARNESS_PERL_SWITCHES=-C && \ + cd ..\t && $(PERLEXE) -I..\lib harness + +test-wide-notty : test-prep + set PERL_SKIP_TTY_TEST=1 && \ + set HARNESS_PERL_SWITCHES=-C && \ + cd ..\t && $(PERLEXE) -I..\lib harness + +clean : Extensions_clean + -@erase miniperlmain$(o) + -@erase $(MINIPERL) + -@erase perlglob$(o) + -@erase perlmain$(o) + -@erase config.w32 + -@erase /f config.h + -@erase $(GLOBEXE) + -@erase $(PERLEXE) + -@erase $(WPERLEXE) + -@erase $(PERLDLL) + -@erase $(CORE_OBJ) + -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) + -@erase $(WIN32_OBJ) + -@erase $(DLL_OBJ) + -@erase $(X2P_OBJ) + -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res + -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat + -@erase ..\x2p\*.exe ..\x2p\*.bat + -@erase *.ilk + -@erase *.pdb + +# Handy way to run perlbug -ok without having to install and run the +# installed perlbug. We don't re-run the tests here - we trust the user. +# Please *don't* use this unless all tests pass. +# If you want to report test failures, use "dmake nok" instead. +ok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" + +okfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok + +nok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" + +nokfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok |