diff options
| author | Gurusamy Sarathy <gsar@cpan.org> | 2002-04-21 01:55:35 +0000 |
|---|---|---|
| committer | Gurusamy Sarathy <gsar@cpan.org> | 2002-04-21 01:55:35 +0000 |
| commit | c623ac675720b3145d48cc2ea9474a0f3e0cbbca (patch) | |
| tree | 72f97c16f706a1538dd9a5726323e59d251c8c53 /win32 | |
| parent | 6d1c0808b641926567cd16e07679f427c5fedc61 (diff) | |
| download | perl-c623ac675720b3145d48cc2ea9474a0f3e0cbbca.tar.gz | |
Windows 64-bit support:
* support for building it in the regular makefiles
* large files support via the _*i64() functions (this should be
portable to the 32-bit universe too, but quite untested and
and binary-incompatible, therefore not enabled there)
* three additional test failures in addition to the t/end.t one
(see README.win32)
* sprintf() on Windows gets %I{32,64,}[xoud] format that parallel
the ones available from the CRT (needed because Perl uses
the UVxf macros in both sprintf() *and* in sv_catpvf() et al.)
* add a few 64-bit notes to README.win32
The following general problems were also fixed:
* s/struct stat/Stat_t/g
* Data::Dumper had some naughty 'long' typecasts
* Errno_pm.PL didn't work safe when winsock.h was not in the same
directory as errno.h
* various tell/seek things were incorrectly prototyped
* squelch ugly looking noise when running tests
* Embed.t wasn't linking in all the libraries
* perl57.dll is now perl58.dll (anticipating 5.8.0-RC1)
* re-enable all the disabled warnings (additional fixes may be
needed for the warnings uncovered by this)
p4raw-id: //depot/perl@16033
Diffstat (limited to 'win32')
| -rw-r--r-- | win32/Makefile | 42 | ||||
| -rw-r--r-- | win32/config.gc | 2 | ||||
| -rw-r--r-- | win32/config.vc | 2 | ||||
| -rw-r--r-- | win32/config.vc64 | 953 | ||||
| -rw-r--r-- | win32/config_H.vc64 | 3600 | ||||
| -rw-r--r-- | win32/makefile.mk | 58 | ||||
| -rw-r--r-- | win32/perlglob.c | 2 | ||||
| -rw-r--r-- | win32/perlhost.h | 18 | ||||
| -rw-r--r-- | win32/win32.c | 83 | ||||
| -rw-r--r-- | win32/win32.h | 24 | ||||
| -rw-r--r-- | win32/win32io.c | 4 | ||||
| -rw-r--r-- | win32/win32iop.h | 18 | ||||
| -rw-r--r-- | win32/win32sck.c | 15 |
13 files changed, 4746 insertions, 75 deletions
diff --git a/win32/Makefile b/win32/Makefile index 0277728f84..17c4bc2cfd 100644 --- a/win32/Makefile +++ b/win32/Makefile @@ -1,10 +1,11 @@ # # Makefile to build perl on Windows NT using Microsoft NMAKE. # Supported compilers: -# Visual C++ 5.x (possibly other versions) +# Visual C++ 2.0 through 6.0 (and possibly newer versions) +# MS Platform SDK 64-bit compiler and tools **experimental** # # This is set up to build a perl.exe that runs off a shared library -# (perl57.dll). Also makes individual DLLs for the XS extensions. +# (perl58.dll). Also makes individual DLLs for the XS extensions. # ## @@ -252,6 +253,19 @@ BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS PROCESSOR_ARCHITECTURE = x86 !ENDIF +!IF "$(WIN64)" == "" +!IF "$(PROCESSOR_ARCHITEW6432)" != "" +PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432) +WIN64 = define +!ELSE +!IF "$(PROCESSOR_ARCHITECTURE)" == "IA64" +WIN64 = define +!ELSE +WIN64 = undef +!ENDIF +!ENDIF +!ENDIF + !IF "$(USE_5005THREADS)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread !ELSE @@ -334,7 +348,7 @@ OPTIMIZE = -Od -MD -Z7 -DDEBUGGING ! ELSE OPTIMIZE = -Od -MD -Zi -DDEBUGGING ! ENDIF -LINK_DBG = -debug -pdb:none +LINK_DBG = -debug !ELSE # -O1 yields smaller code, which turns out to be faster than -O2 #OPTIMIZE = -O2 -MD -DNDEBUG @@ -342,6 +356,11 @@ OPTIMIZE = -O1 -MD -DNDEBUG LINK_DBG = -release !ENDIF +!IF "$(WIN64)" == "define" +DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE +OPTIMIZE = $(OPTIMIZE) -Wp64 -Op +!ENDIF + !IF "$(USE_PERLCRT)" != "define" BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX !ENDIF @@ -350,7 +369,12 @@ LIBBASEFILES = $(CRYPT_LIB) \ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib + version.lib + +# win64 doesn't have some libs +!IF "$(WIN64)" != "define" +LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib +!ENDIF # we add LIBC here, since we may be using PerlCRT.dll LIBFILES = $(LIBBASEFILES) $(LIBC) @@ -394,9 +418,8 @@ $(o).dll: # makedef.pl must be updated if this changes, and this should normally # only change when there is an incompatible revision of the public API. -# XXX so why did we change it from perl56 to perl57? -PERLIMPLIB = ..\perl57.lib -PERLDLL = ..\perl57.dll +PERLIMPLIB = ..\perl58.lib +PERLDLL = ..\perl58.dll MINIPERL = ..\miniperl.exe MINIDIR = .\mini @@ -448,8 +471,13 @@ UTILS = \ MAKE = nmake -nologo MAKE_BARE = nmake +!IF "$(WIN64)" == "define" +CFGSH_TMPL = config.vc64 +CFGH_TMPL = config_H.vc64 +!ELSE CFGSH_TMPL = config.vc CFGH_TMPL = config_H.vc +!ENDIF XCOPY = xcopy /f /r /i /d RCOPY = xcopy /f /r /i /e /d diff --git a/win32/config.gc b/win32/config.gc index 5597d8eabd..014381b507 100644 --- a/win32/config.gc +++ b/win32/config.gc @@ -535,7 +535,7 @@ fflushall='undef' find='find' firstmakefile='makefile' flex='' -fpossize='4' +fpossize='8' fpostype='fpos_t' freetype='void' full_ar='' diff --git a/win32/config.vc b/win32/config.vc index 3eb41e6bb3..e4e47ecc23 100644 --- a/win32/config.vc +++ b/win32/config.vc @@ -497,7 +497,7 @@ fflushall='undef' find='find' firstmakefile='makefile' flex='' -fpossize='4' +fpossize='8' fpostype='fpos_t' freetype='void' full_ar='' diff --git a/win32/config.vc64 b/win32/config.vc64 new file mode 100644 index 0000000000..37b05d8928 --- /dev/null +++ b/win32/config.vc64 @@ -0,0 +1,953 @@ +# Configured by: ~cf_email~ +## Target system: WIN32 +Author='' +PERL_CONFIG_SH='true' +Date='$Date' +Header='' +Id='$Id' +Locker='' +Log='$Log' +RCSfile='$RCSfile' +Revision='$Revision' +Source='' +State='' +_a='.lib' +_exe='.exe' +_o='.obj' +afs='false' +afsroot='/afs' +alignbytes='8' +ansi2knr='' +aphostname='' +api_revision='~PERL_API_REVISION~' +api_subversion='~PERL_API_SUBVERSION~' +api_version='~PERL_API_VERSION~' +api_versionstring='~PERL_API_REVISION~.~PERL_API_VERSION~.~PERL_API_SUBVERSION~' +ar='lib' +archlib='~INST_TOP~~INST_VER~\lib~INST_ARCH~' +archlibexp='~INST_TOP~~INST_VER~\lib~INST_ARCH~' +archname64='' +archname='MSWin32' +archobjs='' +asctime_r_proto='0' +awk='awk' +baserev='5' +bash='' +bin='~INST_TOP~~INST_VER~\bin~INST_ARCH~' +bincompat5005='undef' +binexp='~INST_TOP~~INST_VER~\bin~INST_ARCH~' +bison='' +byacc='byacc' +byteorder='1234' +c='' +castflags='0' +cat='type' +cc='~CC~' +cccdlflags=' ' +ccdlflags=' ' +ccflags='-MD -DWIN32' +ccsymbols='' +cf_by='nobody' +cf_email='nobody@no.where.net' +cf_time='' +charsize='1' +chgrp='' +chmod='' +chown='' +clocktype='clock_t' +comm='' +compress='' +contains='grep' +cp='copy' +cpio='' +cpp='cl -nologo -E' +cpp_stuff='42' +cppccsymbols='' +cppflags='-DWIN32' +cpplast='' +cppminus='' +cpprun='cl -nologo -E' +cppstdin='cppstdin' +cppsymbols='' +crypt_r_proto='0' +cryptlib='' +csh='undef' +ctermid_r_proto='0' +ctime_r_proto='0' +d_Gconvert='sprintf((b),"%.*g",(n),(x))' +d_PRIEUldbl='undef' +d_PRIFUldbl='undef' +d_PRIGUldbl='undef' +d_PRIXU64='undef' +d_PRId64='undef' +d_PRIeldbl='undef' +d_PRIfldbl='undef' +d_PRIgldbl='undef' +d_PRIi64='undef' +d_PRIo64='undef' +d_PRIu64='undef' +d_PRIx64='undef' +d__fwalk='undef' +d_access='define' +d_accessx='undef' +d_alarm='define' +d_archlib='define' +d_asctime_r='undef' +d_atolf='undef' +d_atoll='define' +d_attribut='undef' +d_bcmp='undef' +d_bcopy='undef' +d_bincompat5005='undef' +d_bsd='define' +d_bsdgetpgrp='undef' +d_bsdsetpgrp='undef' +d_bzero='undef' +d_casti32='undef' +d_castneg='define' +d_charvspr='undef' +d_chown='undef' +d_chroot='undef' +d_chsize='define' +d_class='undef' +d_closedir='define' +d_cmsghdr_s='undef' +d_const='define' +d_crypt='undef' +d_crypt_r='undef' +d_csh='undef' +d_ctermid_r='undef' +d_ctime_r='undef' +d_cuserid='undef' +d_dbl_dig='define' +d_dbminitproto='undef' +d_difftime='define' +d_dirfd='undef' +d_dirnamlen='define' +d_dlerror='define' +d_dlopen='define' +d_dlsymun='undef' +d_dosuid='undef' +d_drand48_r='undef' +d_drand48proto='undef' +d_dup2='define' +d_eaccess='undef' +d_endgrent='undef' +d_endgrent_r='undef' +d_endhent='undef' +d_endhostent_r='undef' +d_endnent='undef' +d_endnetent_r='undef' +d_endpent='undef' +d_endprotoent_r='undef' +d_endpwent='undef' +d_endpwent_r='undef' +d_endsent='undef' +d_endservent_r='undef' +d_eofnblk='define' +d_eunice='undef' +d_fchdir='undef' +d_fchmod='undef' +d_fchown='undef' +d_fcntl='undef' +d_fcntl_can_lock='undef' +d_fd_macros='define' +d_fd_set='define' +d_fds_bits='define' +d_fgetpos='define' +d_finite='undef' +d_finitel='undef' +d_flexfnam='define' +d_flock='define' +d_flockproto='undef' +d_fork='undef' +d_fp_class='undef' +d_fpathconf='undef' +d_fpclass='undef' +d_fpclassify='undef' +d_fpclassl='undef' +d_fpos64_t='undef' +d_frexpl='undef' +d_fs_data_s='undef' +d_fseeko='undef' +d_fsetpos='define' +d_fstatfs='undef' +d_fstatvfs='undef' +d_fsync='undef' +d_ftello='undef' +d_ftime='define' +d_getcwd='define' +d_getespwnam='undef' +d_getfsstat='undef' +d_getgrent='undef' +d_getgrent_r='undef' +d_getgrgid_r='undef' +d_getgrnam_r='undef' +d_getgrps='undef' +d_gethbyaddr='define' +d_gethbyname='define' +d_gethent='undef' +d_gethname='define' +d_gethostbyaddr_r='undef' +d_gethostbyname_r='undef' +d_gethostent_r='undef' +d_gethostprotos='define' +d_getitimer='undef' +d_getlogin='define' +d_getlogin_r='undef' +d_getmnt='undef' +d_getmntent='undef' +d_getnbyaddr='undef' +d_getnbyname='undef' +d_getnent='undef' +d_getnetbyaddr_r='undef' +d_getnetbyname_r='undef' +d_getnetent_r='undef' +d_getnetprotos='undef' +d_getpagsz='undef' +d_getpbyname='define' +d_getpbynumber='define' +d_getpent='undef' +d_getpgid='undef' +d_getpgrp2='undef' +d_getpgrp='undef' +d_getppid='undef' +d_getprior='undef' +d_getprotobyname_r='undef' +d_getprotobynumber_r='undef' +d_getprotoent_r='undef' +d_getprotoprotos='define' +d_getprpwnam='undef' +d_getpwent='undef' +d_getpwent_r='undef' +d_getpwnam_r='undef' +d_getpwuid_r='undef' +d_getsbyname='define' +d_getsbyport='define' +d_getsent='undef' +d_getservbyname_r='undef' +d_getservbyport_r='undef' +d_getservent_r='undef' +d_getservprotos='define' +d_getspnam='undef' +d_getspnam_r='undef' +d_gettimeod='undef' +d_gmtime_r='undef' +d_gnulibc='undef' +d_grpasswd='undef' +d_hasmntopt='undef' +d_htonl='define' +d_index='undef' +d_inetaton='undef' +d_int64_t='undef' +d_isascii='define' +d_isfinite='undef' +d_isinf='undef' +d_isnan='define' +d_isnanl='undef' +d_killpg='undef' +d_lchown='undef' +d_ldbl_dig='define' +d_link='define' +d_localtime_r='undef' +d_locconv='define' +d_lockf='undef' +d_longdbl='define' +d_longlong='undef' +d_lseekproto='define' +d_lstat='undef' +d_madvise='undef' +d_mblen='define' +d_mbstowcs='define' +d_mbtowc='define' +d_memchr='define' +d_memcmp='define' +d_memcpy='define' +d_memmove='define' +d_memset='define' +d_mkdir='define' +d_mkdtemp='undef' +d_mkfifo='undef' +d_mkstemp='undef' +d_mkstemps='undef' +d_mktime='define' +d_mmap='undef' +d_modfl='undef' +d_modfl_pow32_bug='undef' +d_mprotect='undef' +d_msg='undef' +d_msg_ctrunc='undef' +d_msg_dontroute='undef' +d_msg_oob='undef' +d_msg_peek='undef' +d_msg_proxy='undef' +d_msgctl='undef' +d_msgget='undef' +d_msghdr_s='undef' +d_msgrcv='undef' +d_msgsnd='undef' +d_msync='undef' +d_munmap='undef' +d_mymalloc='undef' +d_nice='undef' +d_nl_langinfo='undef' +d_nv_preserves_uv='undef' +nv_preserves_uv_bits='53' +d_off64_t='undef' +d_old_pthread_create_joinable='undef' +d_oldpthreads='undef' +d_oldsock='undef' +d_open3='undef' +d_pathconf='undef' +d_pause='define' +d_perl_otherlibdirs='undef' +d_phostname='undef' +d_pipe='define' +d_poll='undef' +d_portable='define' +d_procselfexe='undef' +d_pthread_atfork='undef' +d_pthread_yield='undef' +d_pwage='undef' +d_pwchange='undef' +d_pwclass='undef' +d_pwcomment='undef' +d_pwexpire='undef' +d_pwgecos='undef' +d_pwpasswd='undef' +d_pwquota='undef' +d_qgcvt='undef' +d_quad='define' +d_random_r='undef' +d_readdir64_r='undef' +d_readdir='define' +d_readdir_r='undef' +d_readlink='undef' +d_readv='undef' +d_recvmsg='undef' +d_rename='define' +d_rewinddir='define' +d_rmdir='define' +d_safebcpy='undef' +d_safemcpy='undef' +d_sanemcmp='define' +d_sbrkproto='undef' +d_sched_yield='undef' +d_scm_rights='undef' +d_seekdir='define' +d_select='define' +d_sem='undef' +d_semctl='undef' +d_semctl_semid_ds='undef' +d_semctl_semun='undef' +d_semget='undef' +d_semop='undef' +d_sendmsg='undef' +d_setegid='undef' +d_seteuid='undef' +d_setgrent='undef' +d_setgrent_r='undef' +d_setgrps='undef' +d_sethent='undef' +d_sethostent_r='undef' +d_setitimer='undef' +d_setlinebuf='undef' +d_setlocale='define' +d_setlocale_r='undef' +d_setnent='undef' +d_setnetent_r='undef' +d_setpent='undef' +d_setpgid='undef' +d_setpgrp2='undef' +d_setpgrp='undef' +d_setprior='undef' +d_setprotoent_r='undef' +d_setpwent='undef' +d_setpwent_r='undef' +d_setregid='undef' +d_setresgid='undef' +d_setresuid='undef' +d_setreuid='undef' +d_setrgid='undef' +d_setruid='undef' +d_setsent='undef' +d_setservent_r='undef' +d_setsid='undef' +d_setvbuf='define' +d_sfio='undef' +d_shm='undef' +d_shmat='undef' +d_shmatprototype='undef' +d_shmctl='undef' +d_shmdt='undef' +d_shmget='undef' +d_sigaction='undef' +d_sigprocmask='undef' +d_sigsetjmp='undef' +d_sockatmark='undef' +d_sockatmarkproto='undef' +d_socket='define' +d_socklen_t='undef' +d_sockpair='undef' +d_socks5_init='undef' +d_sqrtl='undef' +d_srand48_r='undef' +d_srandom_r='undef' +d_sresgproto='undef' +d_sresuproto='undef' +d_statblks='undef' +d_statfs_f_flags='undef' +d_statfs_s='undef' +d_statvfs='undef' +d_stdio_cnt_lval='define' +d_stdio_ptr_lval='define' +d_stdio_ptr_lval_nochange_cnt='define' +d_stdio_ptr_lval_sets_cnt='undef' +d_stdio_stream_array='undef' +d_stdiobase='define' +d_stdstdio='define' +d_strchr='define' +d_strcoll='define' +d_strctcpy='define' +d_strerrm='strerror(e)' +d_strerror='define' +d_strerror_r='undef' +d_strftime='define' +d_strtod='define' +d_strtol='define' +d_strtold='undef' +d_strtoll='define' +d_strtoq='undef' +d_strtoul='define' +d_strtoull='define' +d_strtouq='undef' +d_strxfrm='define' +d_suidsafe='undef' +d_symlink='undef' +d_syscall='undef' +d_syscallproto='undef' +d_sysconf='undef' +d_sysernlst='' +d_syserrlst='define' +d_system='define' +d_tcgetpgrp='undef' +d_tcsetpgrp='undef' +d_telldir='define' +d_telldirproto='define' +d_time='define' +d_times='define' +d_tm_tm_gmtoff='undef' +d_tm_tm_zone='undef' +d_tmpnam_r='undef' +d_truncate='undef' +d_ttyname_r='undef' +d_tzname='define' +d_u32align='define' +d_ualarm='undef' +d_umask='define' +d_uname='define' +d_union_semun='define' +d_unordered='undef' +d_usleep='undef' +d_usleepproto='undef' +d_ustat='undef' +d_vendorarch='undef' +d_vendorbin='undef' +d_vendorlib='undef' +d_vfork='undef' +d_void_closedir='undef' +d_voidsig='define' +d_voidtty='' +d_volatile='define' +d_vprintf='define' +d_wait4='undef' +d_waitpid='define' +d_wcstombs='define' +d_wctomb='define' +d_writev='undef' +d_xenix='undef' +date='date' +db_hashtype='int' +db_prefixtype='int' +defvoidused='15' +direntrytype='struct direct' +dlext='dll' +dlsrc='dl_win32.xs' +doublesize='8' +drand01='(rand()/(double)((unsigned)1<<RANDBITS))' +drand48_r_proto='0' +dynamic_ext='Socket IO Fcntl Opcode SDBM_File attrs Thread' +eagain='EAGAIN' +ebcdic='undef' +echo='echo' +egrep='egrep' +emacs='' +endgrent_r_proto='0' +endhostent_r_proto='0' +endnetent_r_proto='0' +endprotoent_r_proto='0' +endpwent_r_proto='0' +endservent_r_proto='0' +eunicefix=':' +exe_ext='.exe' +expr='expr' +extensions='~static_ext~ ~dynamic_ext~ ~nonxs_ext~' +fflushNULL='define' +fflushall='undef' +find='find' +firstmakefile='makefile' +flex='' +fpossize='8' +fpostype='fpos_t' +freetype='void' +full_ar='' +full_csh='' +full_sed='' +gccversion='' +getgrent_r_proto='0' +getgrgid_r_proto='0' +getgrnam_r_proto='0' +gethostbyaddr_r_proto='0' +gethostbyname_r_proto='0' +gethostent_r_proto='0' +getlogin_r_proto='0' +getnetbyaddr_r_proto='0' +getnetbyname_r_proto='0' +getnetent_r_proto='0' +getprotobyname_r_proto='0' +getprotobynumber_r_proto='0' +getprotoent_r_proto='0' +getpwent_r_proto='0' +getpwnam_r_proto='0' +getpwuid_r_proto='0' +getservbyname_r_proto='0' +getservbyport_r_proto='0' +getservent_r_proto='0' +getspnam_r_proto='0' +gidformat='"ld"' +gidsign='-1' +gidsize='4' +gidtype='gid_t' +glibpth='/usr/shlib /lib/pa1.1 /usr/lib/large /lib /usr/lib /usr/lib/386 /lib/386 /lib/large /usr/lib/small /lib/small /usr/ccs/lib /usr/ucblib /usr/shlib ' +gmtime_r_proto='0' +grep='grep' +groupcat='' +groupstype='gid_t' +gzip='gzip' +h_fcntl='false' +h_sysfile='true' +hint='recommended' +hostcat='ypcat hosts' +i16size='2' +i16type='short' +i32size='4' +i32type='long' +i64size='8' +i64type='__int64' +i8size='1' +i8type='char' +i_arpainet='define' +i_bsdioctl='' +i_crypt='undef' +i_db='undef' +i_dbm='undef' +i_dirent='define' +i_dld='undef' +i_dlfcn='define' +i_fcntl='define' +i_float='define' +i_fp='undef' +i_fp_class='undef' +i_gdbm='undef' +i_grp='undef' +i_ieeefp='undef' +i_inttypes='undef' +i_langinfo='undef' +i_limits='define' +i_locale='define' +i_machcthr='undef' +i_malloc='define' +i_math='define' +i_memory='undef' +i_mntent='undef' +i_ndbm='undef' +i_netdb='undef' +i_neterrno='undef' +i_netinettcp='undef' +i_niin='undef' +i_poll='undef' +i_prot='undef' +i_pthread='undef' +i_pwd='undef' +i_rpcsvcdbm='define' +i_sfio='undef' +i_sgtty='undef' +i_shadow='undef' +i_socks='undef' +i_stdarg='define' +i_stddef='define' +i_stdlib='define' +i_string='define' +i_sunmath='undef' +i_sysaccess='undef' +i_sysdir='undef' +i_sysfile='undef' +i_sysfilio='define' +i_sysin='undef' +i_sysioctl='undef' +i_syslog='undef' +i_sysmman='undef' +i_sysmode='undef' +i_sysmount='undef' +i_sysndir='undef' +i_sysparam='undef' +i_sysresrc='undef' +i_syssecrt='undef' +i_sysselct='undef' +i_syssockio='undef' +i_sysstat='define' +i_sysstatfs='undef' +i_sysstatvfs='undef' +i_systime='undef' +i_systimek='undef' +i_systimes='undef' +i_systypes='define' +i_sysuio='undef' +i_sysun='undef' +i_sysutsname='undef' +i_sysvfs='undef' +i_syswait='undef' +i_termio='undef' +i_termios='undef' +i_time='define' +i_unistd='undef' +i_ustat='undef' +i_utime='define' +i_values='undef' +i_varargs='undef' +i_varhdr='varargs.h' +i_vfork='undef' +ignore_versioned_solibs='' +inc_version_list='' +inc_version_list_init='0' +incpath='' +inews='' +installarchlib='~INST_TOP~~INST_VER~\lib~INST_ARCH~' +installbin='~INST_TOP~~INST_VER~\bin~INST_ARCH~' +installhtmldir='~INST_TOP~~INST_VER~\html' +installhtmlhelpdir='~INST_TOP~~INST_VER~\htmlhelp' +installman1dir='~INST_TOP~~INST_VER~\man\man1' +installman3dir='~INST_TOP~~INST_VER~\man\man3' +installprefix='~INST_TOP~~INST_VER~' +installprefixexp='~INST_TOP~~INST_VER~' +installprivlib='~INST_TOP~~INST_VER~\lib' +installscript='~INST_TOP~~INST_VER~\bin' +installsitearch='~INST_TOP~\site~INST_VER~\lib~INST_ARCH~' +installsitebin='~INST_TOP~~INST_VER~\bin~INST_ARCH~' +installsitelib='~INST_TOP~\site~INST_VER~\lib' +installstyle='lib' +installusrbinperl='undef' +installvendorarch='' +installvendorbin='' +installvendorlib='' +intsize='4' +issymlink='' +ivdformat='"I64d"' +ivsize='8' +ivtype='__int64' +known_extensions='~static_ext~ ~dynamic_ext~ ~nonxs_ext~' +ksh='' +ld='~LINK32~' +lddlflags='-dll ~LINK_FLAGS~' +ldflags='~LINK_FLAGS~' +ldlibpthname='' +less='less' +lib_ext='.lib' +libc='msvcrt.lib' +libperl='perl.lib' +libpth='' +libs='' +libsdirs='' +libsfiles='' +libsfound='' +libspath='' +libswanted='net socket inet nsl nm ndbm gdbm dbm db malloc dl dld ld sun m c cposix posix ndir dir crypt ucb bsd BSD PW x' +line='line' +lint='' +lkflags='' +ln='' +lns='copy' +localtime_r_proto='0' +locincpth='/usr/local/include /opt/local/include /usr/gnu/include /opt/gnu/include /usr/GNU/include /opt/GNU/include' +loclibpth='/usr/local/lib /opt/local/lib /usr/gnu/lib /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib' +longdblsize='10' +longlongsize='8' +longsize='4' +lp='' +lpr='' +ls='dir' +lseeksize='8' +lseektype='__int64' +mail='' +mailx='' +make='nmake' +make_set_make='#' +mallocobj='malloc.o' +mallocsrc='malloc.c' +malloctype='void *' +man1='man1' +man1dir='~INST_TOP~~INST_VER~\man\man1' +man1direxp='~INST_TOP~~INST_VER~\man\man1' +man1ext='1' +man2='man2' +man2ext='2' +man3='man3' +man3dir='~INST_TOP~~INST_VER~\man\man3' +man3direxp='~INST_TOP~~INST_VER~\man\man3' +man3ext='3' +man4='man4' +man4ext='4' +man5='man5' +man5ext='5' +man6='man6' +man6ext='6' +man7='man7' +man7ext='7' +man8='man8' +man8ext='8' +mandirstyle='bsd' +mips_type='' +mkdir='mkdir' +mmaptype='void *' +modetype='mode_t' +more='more /e' +multiarch='undef' +mv='' +myarchname='MSWin32' +mydomain='' +myhostname='' +myuname='' +n='-n' +need_va_copy='undef' +netdb_hlen_type='int' +netdb_host_type='char *' +netdb_name_type='char *' +netdb_net_type='long' +nm='' +nm_opt='' +nm_so_opt='' +nonxs_ext='Errno' +nroff='' +nveformat='"e"' +nvfformat='"f"' +nvgformat='"g"' +nvsize='8' +nvtype='double' +o_nonblock='O_NONBLOCK' +obj_ext='.obj' +old_pthread_create_joinable='' +optimize='-O' +orderlib='false' +osname='MSWin32' +osvers='4.0' +otherlibdirs='' +package='perl5' +pager='more /e' +passcat='' +patchlevel='~PATCHLEVEL~' +path_sep=';' +perl5='' +perl='perl' +perladmin='' +perlpath='~INST_TOP~~INST_VER~\bin~INST_ARCH~\perl.exe' +pg='' +phostname='hostname' +pidtype='int' +plibpth='' +pm_apiversion='5.005' +pmake='' +pr='' +prefix='~INST_TOP~' +prefixexp='~INST_DRV~' +privlib='~INST_TOP~~INST_VER~\lib' +privlibexp='~INST_TOP~~INST_VER~\lib' +procselfexe='' +prototype='define' +ptrsize='8' +quadkind='4' +quadtype='__int64' +randbits='15' +randfunc='rand' +random_r_proto='0' +randseedtype='unsigned' +ranlib='rem' +rd_nodata='-1' +readdir64_r_proto='0' +readdir_r_proto='0' +revision='5' +rm='del' +rmail='' +runnm='true' +sPRIEUldbl='"E"' +sPRIFUldbl='"F"' +sPRIGUldbl='"G"' +sPRIXU64='"I64X"' +sPRId64='"I64d"' +sPRIeldbl='"e"' +sPRIfldbl='"f"' +sPRIgldbl='"g"' +sPRIi64='"I64i"' +sPRIo64='"I64o"' +sPRIu64='"I64u"' +sPRIx64='"I64x"' +sched_yield='' +scriptdir='~INST_TOP~~INST_VER~\bin' +scriptdirexp='~INST_TOP~~INST_VER~\bin' +sed='sed' +seedfunc='srand' +selectminbits='32' +selecttype='Perl_fd_set *' +sendmail='blat' +setgrent_r_proto='0' +sethostent_r_proto='0' +setlocale_r_proto='0' +setnetent_r_proto='0' +setprotoent_r_proto='0' +setpwent_r_proto='0' +setservent_r_proto='0' +sh='cmd /x /c' +shar='' +sharpbang='#!' +shmattype='void *' +shortsize='2' +shrpenv='' +shsharp='true' +sig_name='ZERO HUP INT QUIT ILL NUM05 NUM06 NUM07 FPE KILL NUM10 SEGV NUM12 PIPE ALRM TERM NUM16 NUM17 NUM18 NUM19 CHLD BREAK ABRT STOP NUM24 CONT CLD' +sig_name_init='"ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0' +sig_num='0 1 2 21 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 20 0' +sig_num_init='0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0' +sig_size='27' +signal_t='void' +sitearch='~INST_TOP~\site~INST_VER~\lib~INST_ARCH~' +sitearchexp='~INST_TOP~\site~INST_VER~\lib~INST_ARCH~' +sitebin='~INST_TOP~\site~INST_VER~\bin~INST_ARCH~' +sitebinexp='~INST_TOP~\site~INST_VER~\bin~INST_ARCH~' +sitelib='~INST_TOP~\site~INST_VER~\lib' +sitelib_stem='' +sitelibexp='~INST_TOP~\site~INST_VER~\lib' +siteprefix='~INST_TOP~\site~INST_VER~' +siteprefixexp='~INST_TOP~\site~INST_VER~' +sizesize='8' +sizetype='size_t' +sleep='' +smail='' +so='dll' +sockethdr='' +socketlib='' +socksizetype='int' +sort='sort' +spackage='Perl5' +spitshell='' +srand48_r_proto='0' +srandom_r_proto='0' +src='' +ssizetype='__int64' +startperl='#!perl' +startsh='#!/bin/sh' +static_ext=' ' +stdchar='char' +stdio_base='((fp)->_base)' +stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)' +stdio_cnt='((fp)->_cnt)' +stdio_filbuf='' +stdio_ptr='((fp)->_ptr)' +stdio_stream_array='' +strerror_r_proto='0' +strings='/usr/include/string.h' +submit='' +subversion='~SUBVERSION~' +sysman='/usr/man/man1' +tail='' +tar='' +tbl='' +tee='' +test='' +timeincl='/usr/include/sys/time.h ' +timetype='time_t' +tmpnam_r_proto='0' +touch='touch' +tr='' +trnl='\012' +troff='' +ttyname_r_proto='0' +u16size='2' +u16type='unsigned short' +u32size='4' +u32type='unsigned long' +u64size='8' +u64type='unsigned __int64' +u8size='1' +u8type='unsigned char' +uidformat='"ld"' +uidsign='-1' +uidsize='4' +uidtype='uid_t' +uname='uname' +uniq='uniq' +uquadtype='unsigned __int64' +use5005threads='undef' +use64bitall='undef' +use64bitint='define' +usecrosscompile='undef' +usedl='define' +useithreads='undef' +uselargefiles='undef' +uselongdouble='undef' +usemorebits='undef' +usemultiplicity='undef' +usemymalloc='n' +usenm='false' +useopcode='true' +useperlio='~USE_PERLIO~' +useposix='true' +usereentrant='undef' +usesfio='false' +useshrplib='yes' +usesocks='undef' +usethreads='undef' +usevendorprefix='undef' +usevfork='false' +usrinc='/usr/include' +uuname='' +uvXUformat='"I64X"' +uvoformat='"I64o"' +uvsize='8' +uvtype='unsigned __int64' +uvuformat='"I64u"' +uvxformat='"I64x"' +vendorarch='' +vendorarchexp='' +vendorbin='' +vendorbinexp='' +vendorlib='' +vendorlib_stem='' +vendorlibexp='' +vendorprefix='' +vendorprefixexp='' +version='~VERSION~' +versiononly='undef' +vi='' +voidflags='15' +xlibpth='/usr/lib/386 /lib/386' +xs_apiversion='5.6.0' +zcat='' +zip='zip' +PERL_REVISION='~PERL_REVISION~' +PERL_SUBVERSION='~PERL_SUBVERSION~' +PERL_VERSION='~PERL_VERSION~' +PERL_API_REVISION='~PERL_API_REVISION~' +PERL_API_SUBVERSION='~PERL_API_SUBVERSION~' +PERL_API_VERSION='~PERL_API_VERSION~' +PATCHLEVEL='~PERL_VERSION~' +SUBVERSION='~PERL_SUBVERSION~' +version_patchlevel_string='' diff --git a/win32/config_H.vc64 b/win32/config_H.vc64 new file mode 100644 index 0000000000..f78e51e051 --- /dev/null +++ b/win32/config_H.vc64 @@ -0,0 +1,3600 @@ +/* + * This file was produced by running the config_h.SH script, which + * gets its values from undef, which is generally produced by + * running Configure. + * + * Feel free to modify any of this as the need arises. Note, however, + * that running config_h.SH again will wipe out any changes you've made. + * For a more permanent change edit undef and rerun config_h.SH. + * + * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ + */ + +/* + * Package name : perl5 + * Source directory : + * Configuration time: Sat Jan 26 22:15:55 2002 + * Configured by : nick + * Target system : + */ + +#ifndef _config_h_ +#define _config_h_ + +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. + */ +#define LOC_SED "" /**/ + +/* HAS_ALARM: + * This symbol, if defined, indicates that the alarm routine is + * available. + */ +#define HAS_ALARM /**/ + +/* HASATTRIBUTE: + * This symbol indicates the C compiler can check for function attributes, + * such as printf formats. This is normally only supported by GNU cc. + */ +/*#define HASATTRIBUTE /**/ +#ifndef HASATTRIBUTE +#define __attribute__(_arg_) +#endif + +/* HAS_BCMP: + * This symbol is defined if the bcmp() routine is available to + * compare blocks of memory. + */ +/*#define HAS_BCMP /**/ + +/* HAS_BCOPY: + * This symbol is defined if the bcopy() routine is available to + * copy blocks of memory. + */ +/*#define HAS_BCOPY /**/ + +/* HAS_BZERO: + * This symbol is defined if the bzero() routine is available to + * set a memory block to 0. + */ +/*#define HAS_BZERO /**/ + +/* HAS_CHOWN: + * This symbol, if defined, indicates that the chown routine is + * available. + */ +/*#define HAS_CHOWN /**/ + +/* HAS_CHROOT: + * This symbol, if defined, indicates that the chroot routine is + * available. + */ +/*#define HAS_CHROOT /**/ + +/* HAS_CHSIZE: + * This symbol, if defined, indicates that the chsize routine is available + * to truncate files. You might need a -lx to get this routine. + */ +#define HAS_CHSIZE /**/ + +/* HASCONST: + * This symbol, if defined, indicates that this C compiler knows about + * the const type. There is no need to actually test for that symbol + * within your programs. The mere use of the "const" keyword will + * trigger the necessary tests. + */ +#define HASCONST /**/ +#ifndef HASCONST +#define const +#endif + +/* HAS_CUSERID: + * This symbol, if defined, indicates that the cuserid routine is + * available to get character login names. + */ +/*#define HAS_CUSERID /**/ + +/* HAS_DBL_DIG: + * This symbol, if defined, indicates that this system's <float.h> + * or <limits.h> defines the symbol DBL_DIG, which is the number + * of significant digits in a double precision number. If this + * symbol is not defined, a guess of 15 is usually pretty good. + */ +#define HAS_DBL_DIG /**/ + +/* HAS_DIFFTIME: + * This symbol, if defined, indicates that the difftime routine is + * available. + */ +#define HAS_DIFFTIME /**/ + +/* HAS_DLERROR: + * This symbol, if defined, indicates that the dlerror routine is + * available to return a string describing the last error that + * occurred from a call to dlopen(), dlclose() or dlsym(). + */ +#define HAS_DLERROR /**/ + +/* HAS_DUP2: + * This symbol, if defined, indicates that the dup2 routine is + * available to duplicate file descriptors. + */ +#define HAS_DUP2 /**/ + +/* HAS_FCHMOD: + * This symbol, if defined, indicates that the fchmod routine is available + * to change mode of opened files. If unavailable, use chmod(). + */ +/*#define HAS_FCHMOD /**/ + +/* HAS_FCHOWN: + * This symbol, if defined, indicates that the fchown routine is available + * to change ownership of opened files. If unavailable, use chown(). + */ +/*#define HAS_FCHOWN /**/ + +/* HAS_FCNTL: + * This symbol, if defined, indicates to the C program that + * the fcntl() function exists. + */ +/*#define HAS_FCNTL /**/ + +/* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). + */ +#define HAS_FGETPOS /**/ + +/* HAS_FLOCK: + * This symbol, if defined, indicates that the flock routine is + * available to do file locking. + */ +#define HAS_FLOCK /**/ + +/* HAS_FORK: + * This symbol, if defined, indicates that the fork routine is + * available. + */ +/*#define HAS_FORK /**/ + +/* HAS_FSETPOS: + * This symbol, if defined, indicates that the fsetpos routine is + * available to set the file position indicator, similar to fseek(). + */ +#define HAS_FSETPOS /**/ + +/* HAS_GETTIMEOFDAY: + * This symbol, if defined, indicates that the gettimeofday() system + * call is available for a sub-second accuracy clock. Usually, the file + * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). + * The type "Timeval" should be used to refer to "struct timeval". + */ +/*#define HAS_GETTIMEOFDAY /**/ +#ifdef HAS_GETTIMEOFDAY +#define Timeval struct timeval /* Structure used by gettimeofday() */ +#endif + +/* HAS_GETGROUPS: + * This symbol, if defined, indicates that the getgroups() routine is + * available to get the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +/*#define HAS_GETGROUPS /**/ + +/* HAS_GETLOGIN: + * This symbol, if defined, indicates that the getlogin routine is + * available to get the login name. + */ +#define HAS_GETLOGIN /**/ + +/* HAS_GETPGID: + * This symbol, if defined, indicates to the C program that + * the getpgid(pid) function is available to get the + * process group id. + */ +/*#define HAS_GETPGID /**/ + +/* HAS_GETPGRP2: + * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) + * routine is available to get the current process group. + */ +/*#define HAS_GETPGRP2 /**/ + +/* HAS_GETPPID: + * This symbol, if defined, indicates that the getppid routine is + * available to get the parent process ID. + */ +/*#define HAS_GETPPID /**/ + +/* HAS_GETPRIORITY: + * This symbol, if defined, indicates that the getpriority routine is + * available to get a process's priority. + */ +/*#define HAS_GETPRIORITY /**/ + +/* HAS_INET_ATON: + * This symbol, if defined, indicates to the C program that the + * inet_aton() function is available to parse IP address "dotted-quad" + * strings. + */ +/*#define HAS_INET_ATON /**/ + +/* HAS_KILLPG: + * This symbol, if defined, indicates that the killpg routine is available + * to kill process groups. If unavailable, you probably should use kill + * with a negative process number. + */ +/*#define HAS_KILLPG /**/ + +/* HAS_LINK: + * This symbol, if defined, indicates that the link routine is + * available to create hard links. + */ +#define HAS_LINK /**/ + +/* HAS_LOCALECONV: + * This symbol, if defined, indicates that the localeconv routine is + * available for numeric and monetary formatting conventions. + */ +#define HAS_LOCALECONV /**/ + +/* HAS_LOCKF: + * This symbol, if defined, indicates that the lockf routine is + * available to do file locking. + */ +/*#define HAS_LOCKF /**/ + +/* HAS_LSTAT: + * This symbol, if defined, indicates that the lstat routine is + * available to do file stats on symbolic links. + */ +/*#define HAS_LSTAT /**/ + +/* HAS_MBLEN: + * This symbol, if defined, indicates that the mblen routine is available + * to find the number of bytes in a multibye character. + */ +#define HAS_MBLEN /**/ + +/* HAS_MBSTOWCS: + * This symbol, if defined, indicates that the mbstowcs routine is + * available to covert a multibyte string into a wide character string. + */ +#define HAS_MBSTOWCS /**/ + +/* HAS_MBTOWC: + * This symbol, if defined, indicates that the mbtowc routine is available + * to covert a multibyte to a wide character. + */ +#define HAS_MBTOWC /**/ + +/* HAS_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * to compare blocks of memory. + */ +#define HAS_MEMCMP /**/ + +/* HAS_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy blocks of memory. + */ +#define HAS_MEMCPY /**/ + +/* HAS_MEMMOVE: + * This symbol, if defined, indicates that the memmove routine is available + * to copy potentially overlapping blocks of memory. This should be used + * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your + * own version. + */ +#define HAS_MEMMOVE /**/ + +/* HAS_MEMSET: + * This symbol, if defined, indicates that the memset routine is available + * to set blocks of memory. + */ +#define HAS_MEMSET /**/ + +/* HAS_MKDIR: + * This symbol, if defined, indicates that the mkdir routine is available + * to create directories. Otherwise you should fork off a new process to + * exec /bin/mkdir. + */ +#define HAS_MKDIR /**/ + +/* HAS_MKFIFO: + * This symbol, if defined, indicates that the mkfifo routine is + * available to create FIFOs. Otherwise, mknod should be able to + * do it for you. However, if mkfifo is there, mknod might require + * super-user privileges which mkfifo will not. + */ +/*#define HAS_MKFIFO /**/ + +/* HAS_MKTIME: + * This symbol, if defined, indicates that the mktime routine is + * available. + */ +#define HAS_MKTIME /**/ + +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. + */ +/*#define HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +/*#define HAS_MUNMAP /**/ + +/* HAS_NICE: + * This symbol, if defined, indicates that the nice routine is + * available. + */ +/*#define HAS_NICE /**/ + +/* HAS_PATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given filename. + */ +/* HAS_FPATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given open file descriptor. + */ +/*#define HAS_PATHCONF /**/ +/*#define HAS_FPATHCONF /**/ + +/* HAS_PAUSE: + * This symbol, if defined, indicates that the pause routine is + * available to suspend a process until a signal is received. + */ +#define HAS_PAUSE /**/ + +/* HAS_PIPE: + * This symbol, if defined, indicates that the pipe routine is + * available to create an inter-process channel. + */ +#define HAS_PIPE /**/ + +/* HAS_POLL: + * This symbol, if defined, indicates that the poll routine is + * available to poll active file descriptors. You may safely + * include <poll.h> when this symbol is defined. + */ +/*#define HAS_POLL /**/ + +/* HAS_READDIR: + * This symbol, if defined, indicates that the readdir routine is + * available to read directory entries. You may have to include + * <dirent.h>. See I_DIRENT. + */ +#define HAS_READDIR /**/ + +/* HAS_SEEKDIR: + * This symbol, if defined, indicates that the seekdir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_SEEKDIR /**/ + +/* HAS_TELLDIR: + * This symbol, if defined, indicates that the telldir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_TELLDIR /**/ + +/* HAS_REWINDDIR: + * This symbol, if defined, indicates that the rewinddir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_REWINDDIR /**/ + +/* HAS_READLINK: + * This symbol, if defined, indicates that the readlink routine is + * available to read the value of a symbolic link. + */ +/*#define HAS_READLINK /**/ + +/* HAS_RENAME: + * This symbol, if defined, indicates that the rename routine is available + * to rename files. Otherwise you should do the unlink(), link(), unlink() + * trick. + */ +#define HAS_RENAME /**/ + +/* HAS_RMDIR: + * This symbol, if defined, indicates that the rmdir routine is + * available to remove directories. Otherwise you should fork off a + * new process to exec /bin/rmdir. + */ +#define HAS_RMDIR /**/ + +/* HAS_SELECT: + * This symbol, if defined, indicates that the select routine is + * available to select active file descriptors. If the timeout field + * is used, <sys/time.h> may need to be included. + */ +#define HAS_SELECT /**/ + +/* HAS_SETEGID: + * This symbol, if defined, indicates that the setegid routine is available + * to change the effective gid of the current program. + */ +/*#define HAS_SETEGID /**/ + +/* HAS_SETEUID: + * This symbol, if defined, indicates that the seteuid routine is available + * to change the effective uid of the current program. + */ +/*#define HAS_SETEUID /**/ + +/* HAS_SETLINEBUF: + * This symbol, if defined, indicates that the setlinebuf routine is + * available to change stderr or stdout from block-buffered or unbuffered + * to a line-buffered mode. + */ +/*#define HAS_SETLINEBUF /**/ + +/* HAS_SETLOCALE: + * This symbol, if defined, indicates that the setlocale routine is + * available to handle locale-specific ctype implementations. + */ +#define HAS_SETLOCALE /**/ + +/* HAS_SETPGID: + * This symbol, if defined, indicates that the setpgid(pid, gpid) + * routine is available to set process group ID. + */ +/*#define HAS_SETPGID /**/ + +/* HAS_SETPGRP2: + * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) + * routine is available to set the current process group. + */ +/*#define HAS_SETPGRP2 /**/ + +/* HAS_SETPRIORITY: + * This symbol, if defined, indicates that the setpriority routine is + * available to set a process's priority. + */ +/*#define HAS_SETPRIORITY /**/ + +/* HAS_SETREGID: + * This symbol, if defined, indicates that the setregid routine is + * available to change the real and effective gid of the current + * process. + */ +/* HAS_SETRESGID: + * This symbol, if defined, indicates that the setresgid routine is + * available to change the real, effective and saved gid of the current + * process. + */ +/*#define HAS_SETREGID /**/ +/*#define HAS_SETRESGID /**/ + +/* HAS_SETREUID: + * This symbol, if defined, indicates that the setreuid routine is + * available to change the real and effective uid of the current + * process. + */ +/* HAS_SETRESUID: + * This symbol, if defined, indicates that the setresuid routine is + * available to change the real, effective and saved uid of the current + * process. + */ +/*#define HAS_SETREUID /**/ +/*#define HAS_SETRESUID /**/ + +/* HAS_SETRGID: + * This symbol, if defined, indicates that the setrgid routine is available + * to change the real gid of the current program. + */ +/*#define HAS_SETRGID /**/ + +/* HAS_SETRUID: + * This symbol, if defined, indicates that the setruid routine is available + * to change the real uid of the current program. + */ +/*#define HAS_SETRUID /**/ + +/* HAS_SETSID: + * This symbol, if defined, indicates that the setsid routine is + * available to set the process group ID. + */ +/*#define HAS_SETSID /**/ + +/* HAS_STRCHR: + * This symbol is defined to indicate that the strchr()/strrchr() + * functions are available for string searching. If not, try the + * index()/rindex() pair. + */ +/* HAS_INDEX: + * This symbol is defined to indicate that the index()/rindex() + * functions are available for string searching. + */ +#define HAS_STRCHR /**/ +/*#define HAS_INDEX /**/ + +/* HAS_STRCOLL: + * This symbol, if defined, indicates that the strcoll routine is + * available to compare strings using collating information. + */ +#define HAS_STRCOLL /**/ + +/* USE_STRUCT_COPY: + * This symbol, if defined, indicates that this C compiler knows how + * to copy structures. If undefined, you'll need to use a block copy + * routine of some sort instead. + */ +#define USE_STRUCT_COPY /**/ + +/* HAS_STRTOD: + * This symbol, if defined, indicates that the strtod routine is + * available to provide better numeric string conversion than atof(). + */ +#define HAS_STRTOD /**/ + +/* HAS_STRTOL: + * This symbol, if defined, indicates that the strtol routine is available + * to provide better numeric string conversion than atoi() and friends. + */ +#define HAS_STRTOL /**/ + +/* HAS_STRXFRM: + * This symbol, if defined, indicates that the strxfrm() routine is + * available to transform strings. + */ +#define HAS_STRXFRM /**/ + +/* HAS_SYMLINK: + * This symbol, if defined, indicates that the symlink routine is available + * to create symbolic links. + */ +/*#define HAS_SYMLINK /**/ + +/* HAS_SYSCALL: + * This symbol, if defined, indicates that the syscall routine is + * available to call arbitrary system calls. If undefined, that's tough. + */ +/*#define HAS_SYSCALL /**/ + +/* HAS_SYSCONF: + * This symbol, if defined, indicates that sysconf() is available + * to determine system related limits and options. + */ +/*#define HAS_SYSCONF /**/ + +/* HAS_SYSTEM: + * This symbol, if defined, indicates that the system routine is + * available to issue a shell command. + */ +#define HAS_SYSTEM /**/ + +/* HAS_TCGETPGRP: + * This symbol, if defined, indicates that the tcgetpgrp routine is + * available to get foreground process group ID. + */ +/*#define HAS_TCGETPGRP /**/ + +/* HAS_TCSETPGRP: + * This symbol, if defined, indicates that the tcsetpgrp routine is + * available to set foreground process group ID. + */ +/*#define HAS_TCSETPGRP /**/ + +/* HAS_TRUNCATE: + * This symbol, if defined, indicates that the truncate routine is + * available to truncate files. + */ +/*#define HAS_TRUNCATE /**/ + +/* HAS_TZNAME: + * This symbol, if defined, indicates that the tzname[] array is + * available to access timezone names. + */ +#define HAS_TZNAME /**/ + +/* HAS_UMASK: + * This symbol, if defined, indicates that the umask routine is + * available to set and get the value of the file creation mask. + */ +#define HAS_UMASK /**/ + +/* HAS_USLEEP: + * This symbol, if defined, indicates that the usleep routine is + * available to let the process sleep on a sub-second accuracy. + */ +/*#define HAS_USLEEP /**/ + +/* HASVOLATILE: + * This symbol, if defined, indicates that this C compiler knows about + * the volatile declaration. + */ +#define HASVOLATILE /**/ +#ifndef HASVOLATILE +#define volatile +#endif + +/* HAS_WAIT4: + * This symbol, if defined, indicates that wait4() exists. + */ +/*#define HAS_WAIT4 /**/ + +/* HAS_WAITPID: + * This symbol, if defined, indicates that the waitpid routine is + * available to wait for child process. + */ +#define HAS_WAITPID /**/ + +/* HAS_WCSTOMBS: + * This symbol, if defined, indicates that the wcstombs routine is + * available to convert wide character strings to multibyte strings. + */ +#define HAS_WCSTOMBS /**/ + +/* HAS_WCTOMB: + * This symbol, if defined, indicates that the wctomb routine is available + * to covert a wide character to a multibyte. + */ +#define HAS_WCTOMB /**/ + +/* I_ARPA_INET: + * This symbol, if defined, indicates to the C program that it should + * include <arpa/inet.h> to get inet_addr and friends declarations. + */ +#define I_ARPA_INET /**/ + +/* I_DBM: + * This symbol, if defined, indicates that <dbm.h> exists and should + * be included. + */ +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and + * should be included. + */ +/*#define I_DBM /**/ +#define I_RPCSVC_DBM /**/ + +/* I_DIRENT: + * This symbol, if defined, indicates to the C program that it should + * include <dirent.h>. Using this symbol also triggers the definition + * of the Direntry_t define which ends up being 'struct dirent' or + * 'struct direct' depending on the availability of <dirent.h>. + */ +/* DIRNAMLEN: + * This symbol, if defined, indicates to the C program that the length + * of directory entry names is provided by a d_namlen field. Otherwise + * you need to do strlen() on the d_name field. + */ +/* Direntry_t: + * This symbol is set to 'struct direct' or 'struct dirent' depending on + * whether dirent is available or not. You should use this pseudo type to + * portably declare your directory entries. + */ +#define I_DIRENT /**/ +#define DIRNAMLEN /**/ +#define Direntry_t struct direct + +/* I_DLFCN: + * This symbol, if defined, indicates that <dlfcn.h> exists and should + * be included. + */ +#define I_DLFCN /**/ + +/* I_FCNTL: + * This manifest constant tells the C program to include <fcntl.h>. + */ +#define I_FCNTL /**/ + +/* I_FLOAT: + * This symbol, if defined, indicates to the C program that it should + * include <float.h> to get definition of symbols like DBL_MAX or + * DBL_MIN, i.e. machine dependent floating point values. + */ +#define I_FLOAT /**/ + +/* I_LIMITS: + * This symbol, if defined, indicates to the C program that it should + * include <limits.h> to get definition of symbols like WORD_BIT or + * LONG_MAX, i.e. machine dependant limitations. + */ +#define I_LIMITS /**/ + +/* I_LOCALE: + * This symbol, if defined, indicates to the C program that it should + * include <locale.h>. + */ +#define I_LOCALE /**/ + +/* I_MATH: + * This symbol, if defined, indicates to the C program that it should + * include <math.h>. + */ +#define I_MATH /**/ + +/* I_MEMORY: + * This symbol, if defined, indicates to the C program that it should + * include <memory.h>. + */ +/*#define I_MEMORY /**/ + +/* I_NET_ERRNO: + * This symbol, if defined, indicates that <net/errno.h> exists and + * should be included. + */ +/*#define I_NET_ERRNO /**/ + +/* I_NETINET_IN: + * This symbol, if defined, indicates to the C program that it should + * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. + */ +/*#define I_NETINET_IN /**/ + +/* I_SFIO: + * This symbol, if defined, indicates to the C program that it should + * include <sfio.h>. + */ +/*#define I_SFIO /**/ + +/* I_STDDEF: + * This symbol, if defined, indicates that <stddef.h> exists and should + * be included. + */ +#define I_STDDEF /**/ + +/* I_STDLIB: + * This symbol, if defined, indicates that <stdlib.h> exists and should + * be included. + */ +#define I_STDLIB /**/ + +/* I_STRING: + * This symbol, if defined, indicates to the C program that it should + * include <string.h> (USG systems) instead of <strings.h> (BSD systems). + */ +#define I_STRING /**/ + +/* I_SYS_DIR: + * This symbol, if defined, indicates to the C program that it should + * include <sys/dir.h>. + */ +/*#define I_SYS_DIR /**/ + +/* I_SYS_FILE: + * This symbol, if defined, indicates to the C program that it should + * include <sys/file.h> to get definition of R_OK and friends. + */ +/*#define I_SYS_FILE /**/ + +/* I_SYS_IOCTL: + * This symbol, if defined, indicates that <sys/ioctl.h> exists and should + * be included. Otherwise, include <sgtty.h> or <termio.h>. + */ +/* I_SYS_SOCKIO: + * This symbol, if defined, indicates the <sys/sockio.h> should be included + * to get socket ioctl options, like SIOCATMARK. + */ +/*#define I_SYS_IOCTL /**/ +/*#define I_SYS_SOCKIO /**/ + +/* I_SYS_NDIR: + * This symbol, if defined, indicates to the C program that it should + * include <sys/ndir.h>. + */ +/*#define I_SYS_NDIR /**/ + +/* I_SYS_PARAM: + * This symbol, if defined, indicates to the C program that it should + * include <sys/param.h>. + */ +/*#define I_SYS_PARAM /**/ + +/* I_SYS_RESOURCE: + * This symbol, if defined, indicates to the C program that it should + * include <sys/resource.h>. + */ +/*#define I_SYS_RESOURCE /**/ + +/* I_SYS_SELECT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/select.h> in order to get definition of struct timeval. + */ +/*#define I_SYS_SELECT /**/ + +/* I_SYS_STAT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/stat.h>. + */ +#define I_SYS_STAT /**/ + +/* I_SYS_TIMES: + * This symbol, if defined, indicates to the C program that it should + * include <sys/times.h>. + */ +/*#define I_SYS_TIMES /**/ + +/* I_SYS_TYPES: + * This symbol, if defined, indicates to the C program that it should + * include <sys/types.h>. + */ +#define I_SYS_TYPES /**/ + +/* I_SYS_UN: + * This symbol, if defined, indicates to the C program that it should + * include <sys/un.h> to get UNIX domain socket definitions. + */ +/*#define I_SYS_UN /**/ + +/* I_SYS_WAIT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/wait.h>. + */ +/*#define I_SYS_WAIT /**/ + +/* I_TERMIO: + * This symbol, if defined, indicates that the program should include + * <termio.h> rather than <sgtty.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/* I_TERMIOS: + * This symbol, if defined, indicates that the program should include + * the POSIX termios.h rather than sgtty.h or termio.h. + * There are also differences in the ioctl() calls that depend on the + * value of this symbol. + */ +/* I_SGTTY: + * This symbol, if defined, indicates that the program should include + * <sgtty.h> rather than <termio.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/*#define I_TERMIO /**/ +/*#define I_TERMIOS /**/ +/*#define I_SGTTY /**/ + +/* I_UNISTD: + * This symbol, if defined, indicates to the C program that it should + * include <unistd.h>. + */ +/*#define I_UNISTD /**/ + +/* I_UTIME: + * This symbol, if defined, indicates to the C program that it should + * include <utime.h>. + */ +#define I_UTIME /**/ + +/* I_VALUES: + * This symbol, if defined, indicates to the C program that it should + * include <values.h> to get definition of symbols like MINFLOAT or + * MAXLONG, i.e. machine dependant limitations. Probably, you + * should use <limits.h> instead, if it is available. + */ +/*#define I_VALUES /**/ + +/* I_VFORK: + * This symbol, if defined, indicates to the C program that it should + * include vfork.h. + */ +/*#define I_VFORK /**/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE 4 /**/ +#define LONGSIZE 4 /**/ +#define SHORTSIZE 2 /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +/*#define MULTIARCH /**/ + +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#define HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t __int64 /**/ +# define Uquad_t unsigned __int64 /**/ +# define QUADKIND 4 /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. + */ +/*#define HAS_ACCESSX /**/ + +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. + */ +/*#define HAS_EACCESS /**/ + +/* I_SYS_ACCESS: + * This symbol, if defined, indicates to the C program that it should + * include <sys/access.h>. + */ +/*#define I_SYS_ACCESS /**/ + +/* I_SYS_SECURITY: + * This symbol, if defined, indicates to the C program that it should + * include <sys/security.h>. + */ +/*#define I_SYS_SECURITY /**/ + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +/* OSVERS: + * This symbol contains the version of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "MSWin32" /**/ +#define OSVERS "4.0" /**/ + +/* MEM_ALIGNBYTES: + * This symbol contains the number of bytes required to align a + * double, or a long double when applicable. Usual values are 2, + * 4 and 8. The default is eight, for safety. + */ +#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) +# define MEM_ALIGNBYTES 8 +#else +#define MEM_ALIGNBYTES 8 +#endif + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define ARCHLIB "c:\\perl\\5.7.3\\lib\\MSWin32-x86-multi-thread" /**/ +/*#define ARCHLIB_EXP "" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "MSWin32-x86-multi-thread" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +/*#define HAS_ATOLF /**/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. + */ +#define HAS_ATOLL /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread" /**/ +#define BIN_EXP "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread" /**/ + +/* PERL_BINCOMPAT_5005: + * This symbol, if defined, indicates that this version of Perl should be + * binary-compatible with Perl 5.005. This is impossible for builds + * that use features like threads and multiplicity it is always undef + * for those versions. + */ +/*#define PERL_BINCOMPAT_5005 /**/ + +/* BYTEORDER: + * This symbol holds the hexadecimal constant defined in byteorder, + * i.e. 0x1234 or 0x4321, etc... + * If the compiler supports cross-compiling or multiple-architecture + * binaries (eg. on NeXT systems), use compiler-defined macros to + * determine the byte order. + * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture + * Binaries (MAB) on either big endian or little endian machines. + * The endian-ness is available at compile-time. This only matters + * for perl, where the config.h can be generated and installed on + * one system, and used by a different architecture to build an + * extension. Older versions of NeXT that might not have + * defined either *_ENDIAN__ were all on Motorola 680x0 series, + * so the default case (for NeXT) is big endian to catch them. + * This might matter for NeXT 3.0. + */ +#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) +# ifdef __LITTLE_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x1234 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x12345678 +# endif +# endif +# else +# ifdef __BIG_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x4321 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +# endif +# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) +# define BYTEORDER 0x4321 +# endif +#else +#define BYTEORDER 0x1234 /* large digits for MSB */ +#endif /* NeXT */ + +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if 42 == 1 +#define CAT2(a,b) a/**/b +#define STRINGIFY(a) "a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if 42 == 42 +#define PeRl_CaTiFy(a, b) a ## b +#define PeRl_StGiFy(a) #a +/* the additional level of indirection enables these macros to be + * used as arguments to other macros. See K&R 2nd ed., page 231. */ +#define CAT2(a,b) PeRl_CaTiFy(a,b) +#define StGiFy(a) PeRl_StGiFy(a) +#define STRINGIFY(a) PeRl_StGiFy(a) +#endif +#if 42 != 1 && 42 != 42 +# include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "cppstdin" +#define CPPMINUS "" +#define CPPRUN "cl -nologo -E" +#define CPPLAST "" + +/* HAS__FWALK: + * This symbol, if defined, indicates that the _fwalk system call is + * available to apply a function to all the file handles. + */ +/*#define HAS__FWALK /**/ + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#define HAS_ACCESS /**/ + +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +/*#define CASTI32 /**/ + +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + * 4 = couldn't cast in argument expression list + */ +#define CASTNEGFLOAT /**/ +#define CASTFLAGS 0 /**/ + +/* HAS_CLASS: + * This symbol, if defined, indicates that the class routine is + * available to classify doubles. Available for example in AIX. + * The returned values are defined in <float.h> and are: + * + * FP_PLUS_NORM Positive normalized, nonzero + * FP_MINUS_NORM Negative normalized, nonzero + * FP_PLUS_DENORM Positive denormalized, nonzero + * FP_MINUS_DENORM Negative denormalized, nonzero + * FP_PLUS_ZERO +0.0 + * FP_MINUS_ZERO -0.0 + * FP_PLUS_INF +INF + * FP_MINUS_INF -INF + * FP_NANS Signaling Not a Number (NaNS) + * FP_NANQ Quiet Not a Number (NaNQ) + */ +/*#define HAS_CLASS /**/ + +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. + */ +/*#define VOID_CLOSEDIR /**/ + +/* HAS_STRUCT_CMSGHDR: + * This symbol, if defined, indicates that the struct cmsghdr + * is supported. + */ +/*#define HAS_STRUCT_CMSGHDR /**/ + +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +/*#define HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "" /**/ +#endif + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +/*#define DLSYM_NEEDS_UNDERSCORE /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48(void); + */ +/*#define HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +/*#define HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +/*#define HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +/*#define HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +/*#define HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +/*#define HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +/*#define HAS_ENDSERVENT /**/ + +/* HAS_FCHDIR: + * This symbol, if defined, indicates that the fchdir routine is + * available to change directory using a file descriptor. + */ +/*#define HAS_FCHDIR /**/ + +/* FCNTL_CAN_LOCK: + * This symbol, if defined, indicates that fcntl() can be used + * for file locking. Normally on Unix systems this is defined. + * It may be undefined on VMS. + */ +/*#define FCNTL_CAN_LOCK /**/ + +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in <sys/types.h> + */ +#define HAS_FD_SET /**/ + +/* HAS_FINITE: + * This symbol, if defined, indicates that the finite routine is + * available to check whether a double is finite (non-infinity non-NaN). + */ +/*#define HAS_FINITE /**/ + +/* HAS_FINITEL: + * This symbol, if defined, indicates that the finitel routine is + * available to check whether a long double is finite + * (non-infinity non-NaN). + */ +/*#define HAS_FINITEL /**/ + +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#define FLEXFILENAMES /**/ + +/* HAS_FP_CLASS: + * This symbol, if defined, indicates that the fp_class routine is + * available to classify doubles. Available for example in Digital UNIX. + * The returned values are defined in <math.h> and are: + * + * FP_SNAN Signaling NaN (Not-a-Number) + * FP_QNAN Quiet NaN (Not-a-Number) + * FP_POS_INF +infinity + * FP_NEG_INF -infinity + * FP_POS_NORM Positive normalized + * FP_NEG_NORM Negative normalized + * FP_POS_DENORM Positive denormalized + * FP_NEG_DENORM Negative denormalized + * FP_POS_ZERO +0.0 (positive zero) + * FP_NEG_ZERO -0.0 (negative zero) + */ +/*#define HAS_FP_CLASS /**/ + +/* HAS_FPCLASS: + * This symbol, if defined, indicates that the fpclass routine is + * available to classify doubles. Available for example in Solaris/SVR4. + * The returned values are defined in <ieeefp.h> and are: + * + * FP_SNAN signaling NaN + * FP_QNAN quiet NaN + * FP_NINF negative infinity + * FP_PINF positive infinity + * FP_NDENORM negative denormalized non-zero + * FP_PDENORM positive denormalized non-zero + * FP_NZERO negative zero + * FP_PZERO positive zero + * FP_NNORM negative normalized non-zero + * FP_PNORM positive normalized non-zero + */ +/*#define HAS_FPCLASS /**/ + +/* HAS_FPCLASSIFY: + * This symbol, if defined, indicates that the fpclassify routine is + * available to classify doubles. Available for example in HP-UX. + * The returned values are defined in <math.h> and are + * + * FP_NORMAL Normalized + * FP_ZERO Zero + * FP_INFINITE Infinity + * FP_SUBNORMAL Denormalized + * FP_NAN NaN + * + */ +/*#define HAS_FPCLASSIFY /**/ + +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. + */ +/*#define HAS_FPOS64_T /**/ + +/* HAS_FREXPL: + * This symbol, if defined, indicates that the frexpl routine is + * available to break a long double floating-point number into + * a normalized fraction and an integral power of 2. + */ +/*#define HAS_FREXPL /**/ + +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. + */ +/*#define HAS_STRUCT_FS_DATA /**/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FSEEKO /**/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. + */ +/*#define HAS_FSTATFS /**/ + +/* HAS_FSYNC: + * This symbol, if defined, indicates that the fsync routine is + * available to write a file's modified data and attributes to + * permanent storage. + */ +/*#define HAS_FSYNC /**/ + +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FTELLO /**/ + +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. Arguments for the Gconvert + * macro are: value, number of digits, whether trailing zeros should + * be retained, and the output buffer. + * Possible values are: + * d_Gconvert='gconvert((x),(n),(t),(b))' + * d_Gconvert='gcvt((x),(n),(b))' + * d_Gconvert='sprintf((b),"%.*g",(n),(x))' + * The last two assume trailing zeros should not be kept. + */ +#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) + +/* HAS_GETCWD: + * This symbol, if defined, indicates that the getcwd routine is + * available to get the current working directory. + */ +#define HAS_GETCWD /**/ + +/* HAS_GETESPWNAM: + * This symbol, if defined, indicates that the getespwnam system call is + * available to retrieve enchanced (shadow) password entries by name. + */ +/*#define HAS_GETESPWNAM /**/ + +/* HAS_GETFSSTAT: + * This symbol, if defined, indicates that the getfsstat routine is + * available to stat filesystems in bulk. + */ +/*#define HAS_GETFSSTAT /**/ + +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. + */ +/*#define HAS_GETGRENT /**/ + +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. + */ +#define HAS_GETHOSTBYADDR /**/ + +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. + */ +#define HAS_GETHOSTBYNAME /**/ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. + */ +/*#define HAS_GETHOSTENT /**/ + +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. + */ +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. + */ +/* HAS_PHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * contents of PHOSTNAME as a command to feed to the popen() routine + * to derive the host name. + */ +#define HAS_GETHOSTNAME /**/ +#define HAS_UNAME /**/ +/*#define HAS_PHOSTNAME /**/ +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "" /* How to get the host name */ +#endif + +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETHOST_PROTOS /**/ + +/* HAS_GETITIMER: + * This symbol, if defined, indicates that the getitimer routine is + * available to return interval timers. + */ +/*#define HAS_GETITIMER /**/ + +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. + */ +/*#define HAS_GETMNT /**/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. + */ +/*#define HAS_GETMNTENT /**/ + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. + */ +/*#define HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. + */ +/*#define HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. + */ +/*#define HAS_GETNETENT /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +/*#define HAS_GETNET_PROTOS /**/ + +/* HAS_GETPAGESIZE: + * This symbol, if defined, indicates that the getpagesize system call + * is available to get system page size, which is the granularity of + * many memory management calls. + */ +/*#define HAS_GETPAGESIZE /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. + */ +/*#define HAS_GETPROTOENT /**/ + +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. + */ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ +/*#define HAS_GETPGRP /**/ +/*#define USE_BSD_GETPGRP /**/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. + */ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#define HAS_GETPROTOBYNAME /**/ +#define HAS_GETPROTOBYNUMBER /**/ + +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETPRPWNAM: + * This symbol, if defined, indicates that the getprpwnam system call is + * available to retrieve protected (shadow) password entries by name. + */ +/*#define HAS_GETPRPWNAM /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. + */ +/*#define HAS_GETPWENT /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. + */ +/*#define HAS_GETSERVENT /**/ + +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. + */ +/*#define HAS_GETSPNAM /**/ + +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. + */ +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. + */ +#define HAS_GETSERVBYNAME /**/ +#define HAS_GETSERVBYPORT /**/ + +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. + */ +/*#define HAS_GNULIBC /**/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +/*#define HAS_HASMNTOPT /**/ + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ + +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the <inttypes.h> needs to be included, but sometimes + * <sys/types.h> is enough. + */ +/*#define HAS_INT64_T /**/ + +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#define HAS_ISASCII /**/ + +/* HAS_ISFINITE: + * This symbol, if defined, indicates that the isfinite routine is + * available to check whether a double is finite (non-infinity non-NaN). + */ +/*#define HAS_ISFINITE /**/ + +/* HAS_ISINF: + * This symbol, if defined, indicates that the isinf routine is + * available to check whether a double is an infinity. + */ +/*#define HAS_ISINF /**/ + +/* HAS_ISNAN: + * This symbol, if defined, indicates that the isnan routine is + * available to check whether a double is a NaN. + */ +#define HAS_ISNAN /**/ + +/* HAS_ISNANL: + * This symbol, if defined, indicates that the isnanl routine is + * available to check whether a long double is a NaN. + */ +/*#define HAS_ISNANL /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +/*#define HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's <float.h> + * or <limits.h> defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. + */ +#define HAS_LDBL_DIG /**/ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. + */ +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. + */ +#define HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE 10 /**/ +#endif + +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. + */ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +/*#define HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE 8 /**/ +#endif + +/* HAS_LSEEK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the lseek() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern off_t lseek(int, off_t, int); + */ +#define HAS_LSEEK_PROTO /**/ + +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. + */ +/*#define HAS_MADVISE /**/ + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#define HAS_MEMCHR /**/ + +/* HAS_MKDTEMP: + * This symbol, if defined, indicates that the mkdtemp routine is + * available to exclusively create a uniquely named temporary directory. + */ +/*#define HAS_MKDTEMP /**/ + +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. + */ +/*#define HAS_MKSTEMP /**/ + +/* HAS_MKSTEMPS: + * This symbol, if defined, indicates that the mkstemps routine is + * available to excluslvely create and open a uniquely named + * (with a suffix) temporary file. + */ +/*#define HAS_MKSTEMPS /**/ + +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. + */ +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. + */ +/*#define HAS_MMAP /**/ +#define Mmap_t void * /**/ + +/* HAS_MODFL: + * This symbol, if defined, indicates that the modfl routine is + * available to split a long double x into a fractional part f and + * an integer part i such that |f| < 1.0 and (f + i) = x. + */ +/* HAS_MODFL_POW32_BUG: + * This symbol, if defined, indicates that the modfl routine is + * broken for long doubles >= pow(2, 32). + * For example from 4294967303.150000 one would get 4294967302.000000 + * and 1.150000. The bug has been seen in certain versions of glibc, + * release 2.2.2 is known to be okay. + */ +/*#define HAS_MODFL /**/ +/*#define HAS_MODFL_POW32_BUG /**/ + +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. + */ +/*#define HAS_MPROTECT /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +/*#define HAS_MSG /**/ + +/* HAS_STRUCT_MSGHDR: + * This symbol, if defined, indicates that the struct msghdr + * is supported. + */ +/*#define HAS_STRUCT_MSGHDR /**/ + +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +/*#define HAS_OFF64_T /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +/*#define HAS_OPEN3 /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +/*#define OLD_PTHREAD_CREATE_JOINABLE /**/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/*#define HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD /**/ +/*#define HAS_SCHED_YIELD /**/ + +/* HAS_READV: + * This symbol, if defined, indicates that the readv routine is + * available to do gather reads. You will also need <sys/uio.h> + * and there I_SYSUIO. + */ +/*#define HAS_READV /**/ + +/* HAS_RECVMSG: + * This symbol, if defined, indicates that the recvmsg routine is + * available to send structured socket messages. + */ +/*#define HAS_RECVMSG /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Normally, you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +/*#define HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. If you need to + * copy overlapping memory blocks, you should check HAS_MEMMOVE and + * use memmove() instead, if available. + */ +/*#define HAS_SAFE_MEMCPY /**/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. + */ +#define HAS_SANE_MEMCMP /**/ + +/* HAS_SBRK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the sbrk() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern void* sbrk(int); + * extern void* sbrk(size_t); + */ +/*#define HAS_SBRK_PROTO /**/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +/*#define HAS_SEM /**/ + +/* HAS_SENDMSG: + * This symbol, if defined, indicates that the sendmsg routine is + * available to send structured socket messages. + */ +/*#define HAS_SENDMSG /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. + */ +/*#define HAS_SETGRENT /**/ + +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +/*#define HAS_SETGROUPS /**/ + +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. + */ +/*#define HAS_SETHOSTENT /**/ + +/* HAS_SETITIMER: + * This symbol, if defined, indicates that the setitimer routine is + * available to set interval timers. + */ +/*#define HAS_SETITIMER /**/ + +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. + */ +/*#define HAS_SETNETENT /**/ + +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. + */ +/*#define HAS_SETPROTOENT /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. + */ +/*#define HAS_SETPGRP /**/ +/*#define USE_BSD_SETPGRP /**/ + +/* HAS_SETPROCTITLE: + * This symbol, if defined, indicates that the setproctitle routine is + * available to set process title. + */ +/*#define HAS_SETPROCTITLE /**/ + +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +/*#define HAS_SETPWENT /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. + */ +/*#define HAS_SETSERVENT /**/ + +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +#define HAS_SETVBUF /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +/*#define USE_SFIO /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +/*#define HAS_SHM /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +/*#define HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +/*#define HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +#define HAS_SOCKET /**/ +/*#define HAS_SOCKETPAIR /**/ +/*#define HAS_MSG_CTRUNC /**/ +/*#define HAS_MSG_DONTROUTE /**/ +/*#define HAS_MSG_OOB /**/ +/*#define HAS_MSG_PEEK /**/ +/*#define HAS_MSG_PROXY /**/ +/*#define HAS_SCM_RIGHTS /**/ + +/* HAS_SOCKS5_INIT: + * This symbol, if defined, indicates that the socks5_init routine is + * available to initialize SOCKS 5. + */ +/*#define HAS_SOCKS5_INIT /**/ + +/* HAS_SQRTL: + * This symbol, if defined, indicates that the sqrtl routine is + * available to do long double square roots. + */ +/*#define HAS_SQRTL /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#ifndef USE_STAT_BLOCKS +/*#define USE_STAT_BLOCKS /**/ +#endif + +/* HAS_STRUCT_STATFS_F_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem containing the file. + * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), + * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not + * have statfs() and struct statfs, they have ustat() and getmnt() + * with struct ustat and struct fs_data. + */ +/*#define HAS_STRUCT_STATFS_F_FLAGS /**/ + +/* HAS_STRUCT_STATFS: + * This symbol, if defined, indicates that the struct statfs + * to do statfs() is supported. + */ +/*#define HAS_STRUCT_STATFS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems by file descriptors. + */ +/*#define HAS_FSTATVFS /**/ + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +/* STDIO_PTR_LVAL_SETS_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n has the side effect of decreasing the + * value of File_cnt(fp) by n. + */ +/* STDIO_PTR_LVAL_NOCHANGE_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n leaves File_cnt(fp) unchanged. + */ +#define USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) ((fp)->_ptr) +#define STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) ((fp)->_cnt) +#define STDIO_CNT_LVALUE /**/ +/*#define STDIO_PTR_LVAL_SETS_CNT /**/ +#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/ +#endif + +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +#define USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) ((fp)->_base) +#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) +#endif + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#define HAS_STRERROR /**/ +#define HAS_SYS_ERRLIST /**/ +#define Strerror(e) strerror(e) + +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. + */ +/*#define HAS_STRTOLD /**/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. + */ +#define HAS_STRTOLL /**/ + +/* HAS_STRTOQ: + * This symbol, if defined, indicates that the strtoq routine is + * available to convert strings to long longs (quads). + */ +/*#define HAS_STRTOQ /**/ + +/* HAS_STRTOUL: + * This symbol, if defined, indicates that the strtoul routine is + * available to provide conversion of strings to unsigned long. + */ +#define HAS_STRTOUL /**/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. + */ +#define HAS_STRTOULL /**/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). + */ +/*#define HAS_STRTOUQ /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir(DIR*); + */ +#define HAS_TELLDIR_PROTO /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case <sys/types.h> should be + * included). + */ +#define Time_t time_t /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include <sys/times.h>. + */ +#define HAS_TIMES /**/ + +/* HAS_UALARM: + * This symbol, if defined, indicates that the ualarm routine is + * available to do alarms with microsecond granularity. + */ +/*#define HAS_UALARM /**/ + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including <sys/sem.h>. If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +#define HAS_UNION_SEMUN /**/ +/*#define USE_SEMCTL_SEMUN /**/ +/*#define USE_SEMCTL_SEMID_DS /**/ + +/* HAS_UNORDERED: + * This symbol, if defined, indicates that the unordered routine is + * available to check whether two doubles are unordered + * (effectively: whether either of them is NaN) + */ +/*#define HAS_UNORDERED /**/ + +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +/*#define HAS_USTAT /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +/*#define HAS_VFORK /**/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t void /* Signal handler's return type */ + +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#define HAS_VPRINTF /**/ +/*#define USE_CHAR_VSPRINTF /**/ + +/* HAS_WRITEV: + * This symbol, if defined, indicates that the writev routine is + * available to do scatter writes. + */ +/*#define HAS_WRITEV /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +#define USE_DYNAMIC_LOADING /**/ + +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE 8 /**/ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +/*#define EBCDIC /**/ + +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. + */ +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. + */ +#define FFLUSH_NULL /**/ +/*#define FFLUSH_ALL /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Fpos_t fpos_t /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. + */ +#define Gid_t_f "ld" /**/ + +/* Gid_t_sign: + * This symbol holds the signedess of a Gid_t. + * 1 for unsigned, -1 for signed. + */ +#define Gid_t_sign -1 /* GID sign */ + +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. + */ +#define Gid_t_size 4 /* GID size */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * gid_t, etc... It may be necessary to include <sys/types.h> to get + * any typedef'ed information. + */ +#define Gid_t gid_t /* Type for getgid(), etc... */ + +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups() and setgroups(). Usually, this is the same as + * gidtype (gid_t) , but sometimes it isn't. + * It can be int, ushort, gid_t, etc... + * It may be necessary to include <sys/types.h> to get any + * typedef'ed information. This is only required if you have + * getgroups() or setgroups().. + */ +#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) +#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ +#endif + +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the <db.h> header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the <db.h> header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +/* DB_VERSION_MAJOR_CFG: + * This symbol, if defined, defines the major version number of + * Berkeley DB found in the <db.h> header when Perl was configured. + */ +/* DB_VERSION_MINOR_CFG: + * This symbol, if defined, defines the minor version number of + * Berkeley DB found in the <db.h> header when Perl was configured. + * For DB version 1 this is always 0. + */ +/* DB_VERSION_PATCH_CFG: + * This symbol, if defined, defines the patch version number of + * Berkeley DB found in the <db.h> header when Perl was configured. + * For DB version 1 this is always 0. + */ +#define DB_Hash_t int /**/ +#define DB_Prefix_t int /**/ +#define DB_VERSION_MAJOR_CFG undef /**/ +#define DB_VERSION_MINOR_CFG undef /**/ +#define DB_VERSION_PATCH_CFG undef /**/ + +/* I_FP_CLASS: + * This symbol, if defined, indicates that <fp_class.h> exists and + * should be included. + */ +/*#define I_FP_CLASS /**/ + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include <grp.h>. + */ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in <grp.h> contains gr_passwd. + */ +/*#define I_GRP /**/ +/*#define GRPASSWD /**/ + +/* I_IEEEFP: + * This symbol, if defined, indicates that <ieeefp.h> exists and + * should be included. + */ +/*#define I_IEEEFP /**/ + +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include <inttypes.h>. + */ +/*#define I_INTTYPES /**/ + +/* I_LIBUTIL: + * This symbol, if defined, indicates that <libutil.h> exists and + * should be included. + */ +/*#define I_LIBUTIL /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include <mach/cthreads.h>. + */ +/*#define I_MACH_CTHREADS /**/ + +/* I_MNTENT: + * This symbol, if defined, indicates that <mntent.h> exists and + * should be included. + */ +/*#define I_MNTENT /**/ + +/* I_NETDB: + * This symbol, if defined, indicates that <netdb.h> exists and + * should be included. + */ +/*#define I_NETDB /**/ + +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include <netinet/tcp.h>. + */ +/*#define I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that <poll.h> exists and + * should be included. + */ +/*#define I_POLL /**/ + +/* I_PROT: + * This symbol, if defined, indicates that <prot.h> exists and + * should be included. + */ +/*#define I_PROT /**/ + +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include <pthread.h>. + */ +/*#define I_PTHREAD /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include <pwd.h>. + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. + */ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +/*#define I_PWD /**/ +/*#define PWQUOTA /**/ +/*#define PWAGE /**/ +/*#define PWCHANGE /**/ +/*#define PWCLASS /**/ +/*#define PWEXPIRE /**/ +/*#define PWCOMMENT /**/ +/*#define PWGECOS /**/ +/*#define PWPASSWD /**/ + +/* I_SHADOW: + * This symbol, if defined, indicates that <shadow.h> exists and + * should be included. + */ +/*#define I_SHADOW /**/ + +/* I_SOCKS: + * This symbol, if defined, indicates that <socks.h> exists and + * should be included. + */ +/*#define I_SOCKS /**/ + +/* I_SUNMATH: + * This symbol, if defined, indicates that <sunmath.h> exists and + * should be included. + */ +/*#define I_SUNMATH /**/ + +/* I_SYSLOG: + * This symbol, if defined, indicates that <syslog.h> exists and + * should be included. + */ +/*#define I_SYSLOG /**/ + +/* I_SYSMODE: + * This symbol, if defined, indicates that <sys/mode.h> exists and + * should be included. + */ +/*#define I_SYSMODE /**/ + +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that <sys/mount.h> exists and + * should be included. + */ +/*#define I_SYS_MOUNT /**/ + +/* I_SYS_STATFS: + * This symbol, if defined, indicates that <sys/statfs.h> exists. + */ +/*#define I_SYS_STATFS /**/ + +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that <sys/statvfs.h> exists and + * should be included. + */ +/*#define I_SYS_STATVFS /**/ + +/* I_SYSUIO: + * This symbol, if defined, indicates that <sys/uio.h> exists and + * should be included. + */ +/*#define I_SYSUIO /**/ + +/* I_SYSUTSNAME: + * This symbol, if defined, indicates that <sys/utsname.h> exists and + * should be included. + */ +/*#define I_SYSUTSNAME /**/ + +/* I_SYS_VFS: + * This symbol, if defined, indicates that <sys/vfs.h> exists and + * should be included. + */ +/*#define I_SYS_VFS /**/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include <time.h>. + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include <sys/time.h>. + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include <sys/time.h> with KERNEL defined. + */ +#define I_TIME /**/ +/*#define I_SYS_TIME /**/ +/*#define I_SYS_TIME_KERNEL /**/ + +/* I_USTAT: + * This symbol, if defined, indicates that <ustat.h> exists and + * should be included. + */ +/*#define I_USTAT /**/ + +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. + */ +#define PERL_INC_VERSION_LIST 0 /**/ + +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. + */ +/*#define INSTALL_USR_BIN_PERL /**/ + +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. + */ +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. + */ +/* PERL_PRIeldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'e') for output. + */ +/* PERL_SCNfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for input. + */ +/*#define PERL_PRIfldbl "f" /**/ +/*#define PERL_PRIgldbl "g" /**/ +/*#define PERL_PRIeldbl "e" /**/ +/*#define PERL_SCNfldbl undef /**/ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. + */ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t __int64 /* <offset> type */ +#define LSEEKSIZE 8 /* <offset> size */ +#define Off_t_size 8 /* <offset> size */ + +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. + */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t void * /**/ +#define Free_t void /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +/*#define MYMALLOC /**/ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include <sys/types.h> + * to get any typedef'ed information. + */ +#define Mode_t mode_t /* file mode parameter for system calls */ + +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK O_NONBLOCK +#define VAL_EAGAIN EAGAIN +#define RD_NODATA -1 +#define EOF_NONBLOCK + +/* NEED_VA_COPY: + * This symbol, if defined, indicates that the system stores + * the variable argument list datatype, va_list, in a format + * that cannot be copied by simple assignment, so that some + * other means must be used when copying is required. + * As such systems vary in their provision (or non-provision) + * of copying mechanisms, handy.h defines a platform- + * independent macro, Perl_va_copy(src, dst), to do the job. + */ +/*#define NEED_VA_COPY /**/ + +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). + */ +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). + */ +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). + */ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t char * /**/ +#define Netdb_hlen_t int /**/ +#define Netdb_name_t char * /**/ +#define Netdb_net_t long /**/ + +/* PERL_OTHERLIBDIRS: + * This variable contains a colon-separated set of paths for the perl + * binary to search for additional library files or modules. + * These directories will be tacked to the end of @INC. + * Perl will automatically search below each path for version- + * and architecture-specific directories. See PERL_INC_VERSION_LIST + * for more details. + */ +/*#define PERL_OTHERLIBDIRS "" /**/ + +/* IVTYPE: + * This symbol defines the C type used for Perl's IV. + */ +/* UVTYPE: + * This symbol defines the C type used for Perl's UV. + */ +/* I8TYPE: + * This symbol defines the C type used for Perl's I8. + */ +/* U8TYPE: + * This symbol defines the C type used for Perl's U8. + */ +/* I16TYPE: + * This symbol defines the C type used for Perl's I16. + */ +/* U16TYPE: + * This symbol defines the C type used for Perl's U16. + */ +/* I32TYPE: + * This symbol defines the C type used for Perl's I32. + */ +/* U32TYPE: + * This symbol defines the C type used for Perl's U32. + */ +/* I64TYPE: + * This symbol defines the C type used for Perl's I64. + */ +/* U64TYPE: + * This symbol defines the C type used for Perl's U64. + */ +/* NVTYPE: + * This symbol defines the C type used for Perl's NV. + */ +/* IVSIZE: + * This symbol contains the sizeof(IV). + */ +/* UVSIZE: + * This symbol contains the sizeof(UV). + */ +/* I8SIZE: + * This symbol contains the sizeof(I8). + */ +/* U8SIZE: + * This symbol contains the sizeof(U8). + */ +/* I16SIZE: + * This symbol contains the sizeof(I16). + */ +/* U16SIZE: + * This symbol contains the sizeof(U16). + */ +/* I32SIZE: + * This symbol contains the sizeof(I32). + */ +/* U32SIZE: + * This symbol contains the sizeof(U32). + */ +/* I64SIZE: + * This symbol contains the sizeof(I64). + */ +/* U64SIZE: + * This symbol contains the sizeof(U64). + */ +/* NVSIZE: + * This symbol contains the sizeof(NV). + */ +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bits of a variable of type UVTYPE. + */ +/* NV_PRESERVES_UV_BITS: + * This symbol contains the number of bits a variable of type NVTYPE + * can preserve of a variable of type UVTYPE. + */ +#define IVTYPE __int64 /**/ +#define UVTYPE unsigned __int64 /**/ +#define I8TYPE char /**/ +#define U8TYPE unsigned char /**/ +#define I16TYPE short /**/ +#define U16TYPE unsigned short /**/ +#define I32TYPE long /**/ +#define U32TYPE unsigned long /**/ +#ifdef HAS_QUAD +#define I64TYPE __int64 /**/ +#define U64TYPE unsigned __int64 /**/ +#endif +#define NVTYPE double /**/ +#define IVSIZE 8 /**/ +#define UVSIZE 8 /**/ +#define I8SIZE 1 /**/ +#define U8SIZE 1 /**/ +#define I16SIZE 2 /**/ +#define U16SIZE 2 /**/ +#define I32SIZE 4 /**/ +#define U32SIZE 4 /**/ +#ifdef HAS_QUAD +#define I64SIZE 8 /**/ +#define U64SIZE 8 /**/ +#endif +#define NVSIZE 8 /**/ +#undef NV_PRESERVES_UV +#define NV_PRESERVES_UV_BITS 53 + +/* IVdf: + * This symbol defines the format string used for printing a Perl IV + * as a signed decimal integer. + */ +/* UVuf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned decimal integer. + */ +/* UVof: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned octal integer. + */ +/* UVxf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer in lowercase abcdef. + */ +/* UVXf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer in uppercase ABCDEF. + */ +/* NVef: + * This symbol defines the format string used for printing a Perl NV + * using %e-ish floating point format. + */ +/* NVff: + * This symbol defines the format string used for printing a Perl NV + * using %f-ish floating point format. + */ +/* NVgf: + * This symbol defines the format string used for printing a Perl NV + * using %g-ish floating point format. + */ +#define IVdf "I64d" /**/ +#define UVuf "I64u" /**/ +#define UVof "I64o" /**/ +#define UVxf "I64x" /**/ +#define UVXf "I64X" /**/ +#define NVef "e" /**/ +#define NVff "f" /**/ +#define NVgf "g" /**/ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Pid_t int /* PID type */ + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PRIVLIB "c:\\perl\\5.7.3\\lib" /**/ +#define PRIVLIB_EXP (win32_get_privlib("5.7.3")) /**/ + +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE 8 /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in its headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/ +#define Rand_seed_t unsigned /**/ +#define seedDrand01(x) srand((Rand_seed_t)x) /**/ +#define RANDBITS 15 /**/ + +/* SELECT_MIN_BITS: + * This symbol holds the minimum number of bits operated by select. + * That is, if you do select(n, ...), how many bits at least will be + * cleared in the masks if some activity is detected. Usually this + * is either n or 32*ceil(n/32), especially many little-endians do + * the latter. This is only useful if you have select(), naturally. + */ +#define SELECT_MIN_BITS 32 /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t Perl_fd_set * /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +/* SIG_SIZE: + * This variable contains the number of elements of the sig_name + * and sig_num arrays, excluding the final NULL entry. + */ +#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/ +#define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/ +#define SIG_SIZE 27 /**/ + +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. + */ +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define SITEARCH "c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread" /**/ +/*#define SITEARCH_EXP "" /**/ + +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. + */ +/* SITELIB_EXP: + * This symbol contains the ~name expanded version of SITELIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/* SITELIB_STEM: + * This define is SITELIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ +#define SITELIB "c:\\perl\\site\\5.7.3\\lib" /**/ +#define SITELIB_EXP (win32_get_sitelib("5.7.3")) /**/ +#define SITELIB_STEM "" /**/ + +/* Size_t_size: + * This symbol holds the size of a Size_t in bytes. + */ +#define Size_t_size 8 /**/ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Size_t size_t /* length paramater for string functions */ + +/* Sock_size_t: + * This symbol holds the type used for the size argument of + * various socket calls (just the base type, not the pointer-to). + */ +#define Sock_size_t int /**/ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include <sys/types.h> or <unistd.h> + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t __int64 /* signed count of bytes */ + +/* STARTPERL: + * This variable contains the string to put in front of a perl + * script to make sure (one hopes) that it runs with perl and not + * some shell. + */ +#define STARTPERL "#!perl" /**/ + +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". + */ +#define STDCHAR char /**/ + +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. + */ +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. + */ +/*#define HAS_STDIO_STREAM_ARRAY /**/ +#define STDIO_STREAM_ARRAY + +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. + */ +#define Uid_t_f "ld" /**/ + +/* Uid_t_sign: + * This symbol holds the signedess of a Uid_t. + * 1 for unsigned, -1 for signed. + */ +#define Uid_t_sign -1 /* UID sign */ + +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. + */ +#define Uid_t_size 4 /* UID size */ + +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Uid_t uid_t /* UID type */ + +/* USE_64_BIT_INT: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be employed (be they 32 or 64 bits). The minimal possible + * 64-bitness is used, just enough to get 64-bit integers into Perl. + * This may mean using for example "long longs", while your memory + * may still be limited to 2 gigabytes. + */ +/* USE_64_BIT_ALL: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). The maximal possible + * 64-bitness is employed: LP64 or ILP64, meaning that you will + * be able to use more than 2 gigabytes of memory. This mode is + * even more binary incompatible than USE_64_BIT_INT. You may not + * be able to run the resulting executable in a 32-bit CPU at all or + * you may need at least to reboot your OS to 64-bit mode. + */ +#ifndef USE_64_BIT_INT +#define USE_64_BIT_INT /**/ +#endif + +#ifndef USE_64_BIT_ALL +/*#define USE_64_BIT_ALL /**/ +#endif + +/* USE_LARGE_FILES: + * This symbol, if defined, indicates that large file support + * should be used when available. + */ +#ifndef USE_LARGE_FILES +/*#define USE_LARGE_FILES /**/ +#endif + +/* USE_LONG_DOUBLE: + * This symbol, if defined, indicates that long doubles should + * be used when available. + */ +#ifndef USE_LONG_DOUBLE +/*#define USE_LONG_DOUBLE /**/ +#endif + +/* USE_MORE_BITS: + * This symbol, if defined, indicates that 64-bit interfaces and + * long doubles should be used when available. + */ +#ifndef USE_MORE_BITS +/*#define USE_MORE_BITS /**/ +#endif + +/* MULTIPLICITY: + * This symbol, if defined, indicates that Perl should + * be built to use multiplicity. + */ +#ifndef MULTIPLICITY +#define MULTIPLICITY /**/ +#endif + +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. + */ +#ifndef USE_PERLIO +#define USE_PERLIO /**/ +#endif + +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. + */ +#ifndef USE_SOCKS +/*#define USE_SOCKS /**/ +#endif + +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. + */ +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. + */ +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. + */ +/* USE_REENTRANT_API: + * This symbol, if defined, indicates that Perl should + * try to use the various _r versions of library functions. + * This is extremely experimental. + */ +/*#define USE_5005THREADS /**/ +#define USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif +/*#define OLD_PTHREADS_API /**/ +/*#define USE_REENTRANT_API /**/ + +/* PERL_VENDORARCH: + * If defined, this symbol contains the name of a private library. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. + * It may have a ~ on the front. + * The standard distribution will put nothing in this directory. + * Vendors who distribute perl may wish to place their own + * architecture-dependent modules and extensions in this directory with + * MakeMaker Makefile.PL INSTALLDIRS=vendor + * or equivalent. See INSTALL for details. + */ +/* PERL_VENDORARCH_EXP: + * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/*#define PERL_VENDORARCH "" /**/ +/*#define PERL_VENDORARCH_EXP "" /**/ + +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/* PERL_VENDORLIB_STEM: + * This define is PERL_VENDORLIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ +/*#define PERL_VENDORLIB_EXP "" /**/ +/*#define PERL_VENDORLIB_STEM "" /**/ + +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + +/* PERL_XS_APIVERSION: + * This variable contains the version of the oldest perl binary + * compatible with the present perl. perl.c:incpush() and + * lib/lib.pm will automatically search in c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread for older + * directories across major versions back to xs_apiversion. + * This is only useful if you have a perl library directory tree + * structured like the default one. + * See INSTALL for how this works. + * The versioned site_perl directory was introduced in 5.005, + * so that is the lowest possible value. + * Since this can depend on compile time options (such as + * bincompat) it is set by Configure. Other non-default sources + * of potential incompatibility, such as multiplicity, threads, + * debugging, 64bits, sfio, etc., are not checked for currently, + * though in principle we could go snooping around in old + * Config.pm files. + */ +/* PERL_PM_APIVERSION: + * This variable contains the version of the oldest perl + * compatible with the present perl. (That is, pure perl modules + * written for pm_apiversion will still work for the current + * version). perl.c:incpush() and lib/lib.pm will automatically + * search in c:\\perl\\site\\5.7.3\\lib for older directories across major versions + * back to pm_apiversion. This is only useful if you have a perl + * library directory tree structured like the default one. The + * versioned site_perl library was introduced in 5.005, so that's + * the default setting for this variable. It's hard to imagine + * it changing before Perl6. It is included here for symmetry + * with xs_apiveprsion -- the searching algorithms will + * (presumably) be similar. + * See the INSTALL file for how this works. + */ +#define PERL_XS_APIVERSION "5.6.0" +#define PERL_PM_APIVERSION "5.005" + +/* HAS_CRYPT: + * This symbol, if defined, indicates that the crypt routine is available + * to encrypt passwords and the like. + */ +/*#define HAS_CRYPT /**/ + +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that the bug that prevents + * setuid scripts from being secure is not present in this kernel. + */ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. + */ +/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ +/*#define DOSUID /**/ + +/* Shmat_t: + * This symbol holds the return type of the shmat() system call. + * Usually set to 'void *' or 'char *'. + */ +/* HAS_SHMAT_PROTOTYPE: + * This symbol, if defined, indicates that the sys/shm.h includes + * a prototype for shmat(). Otherwise, it is up to the program to + * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, + * but not always right so it should be emitted by the program only + * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. + */ +#define Shmat_t void * /**/ +/*#define HAS_SHMAT_PROTOTYPE /**/ + +/* I_NDBM: + * This symbol, if defined, indicates that <ndbm.h> exists and should + * be included. + */ +/*#define I_NDBM /**/ + +/* I_STDARG: + * This symbol, if defined, indicates that <stdarg.h> exists and should + * be included. + */ +/* I_VARARGS: + * This symbol, if defined, indicates to the C program that it should + * include <varargs.h>. + */ +#define I_STDARG /**/ +/*#define I_VARARGS /**/ + +/* CAN_PROTOTYPE: + * If defined, this macro indicates that the C compiler can handle + * function prototypes. + */ +/* _: + * This macro is used to declare function parameters for folks who want + * to make declarations with prototypes using a different style than + * the above macros. Use double parentheses. For example: + * + * int main _((int argc, char *argv[])); + */ +#define CAN_PROTOTYPE /**/ +#ifdef CAN_PROTOTYPE +#define _(args) args +#else +#define _(args) () +#endif + +/* SH_PATH: + * This symbol contains the full pathname to the shell used on this + * on this system to execute Bourne shell scripts. Usually, this will be + * /bin/sh, though it's possible that some systems will have /bin/ksh, + * /bin/pdksh, /bin/ash, /bin/bash, or even something such as + * D:/bin/sh.exe. + */ +#define SH_PATH "cmd /x /c" /**/ + +/* USE_CROSS_COMPILE: + * This symbol, if defined, indicates that Perl is being cross-compiled. + */ +/* PERL_TARGETARCH: + * This symbol, if defined, indicates the target architecture + * Perl has been cross-compiled to. Undefined if not a cross-compile. + */ +#ifndef USE_CROSS_COMPILE +/*#define USE_CROSS_COMPILE /**/ +#define PERL_TARGETARCH "undef" /**/ +#endif + +/* HAS_DBMINIT_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the dbminit() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int dbminit(char *); + */ +/*#define HAS_DBMINIT_PROTO /**/ + +/* HAS_DIRFD: + * This manifest constant lets the C program know that dirfd + * is available. + */ +/*#define HAS_DIRFD /**/ + +/* HAS_FLOCK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the flock() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int flock(int, int); + */ +/*#define HAS_FLOCK_PROTO /**/ + +/* HAS_FPCLASSL: + * This symbol, if defined, indicates that the fpclassl routine is + * available to classify long doubles. Available for example in IRIX. + * The returned values are defined in <ieeefp.h> and are: + * + * FP_SNAN signaling NaN + * FP_QNAN quiet NaN + * FP_NINF negative infinity + * FP_PINF positive infinity + * FP_NDENORM negative denormalized non-zero + * FP_PDENORM positive denormalized non-zero + * FP_NZERO negative zero + * FP_PZERO positive zero + * FP_NNORM negative normalized non-zero + * FP_PNORM positive normalized non-zero + */ +/*#define HAS_FPCLASSL /**/ + +/* HAS_NL_LANGINFO: + * This symbol, if defined, indicates that the nl_langinfo routine is + * available to return local data. You will also need <langinfo.h> + * and therefore I_LANGINFO. + */ +/*#define HAS_NL_LANGINFO /**/ + +/* HAS_PROCSELFEXE: + * This symbol is defined if PROCSELFEXE_PATH is a symlink + * to the absolute pathname of the executing program. + */ +/* PROCSELFEXE_PATH: + * If HAS_PROCSELFEXE is defined this symbol is the filename + * of the symbolic link pointing to the absolute pathname of + * the executing program. + */ +/*#define HAS_PROCSELFEXE /**/ +#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH) +#define PROCSELFEXE_PATH /**/ +#endif + +/* HAS_SIGPROCMASK: + * This symbol, if defined, indicates that the sigprocmask + * system call is available to examine or change the signal mask + * of the calling process. + */ +/*#define HAS_SIGPROCMASK /**/ + +/* HAS_SOCKATMARK: + * This symbol, if defined, indicates that the sockatmark routine is + * available to test whether a socket is at the out-of-band mark. + */ +/*#define HAS_SOCKATMARK /**/ + +/* HAS_SOCKATMARK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the sockatmark() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int sockatmark(int); + */ +/*#define HAS_SOCKATMARK_PROTO /**/ + +/* HAS_SETRESGID_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the setresgid() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); + */ +/*#define HAS_SETRESGID_PROTO /**/ + +/* HAS_SETRESUID_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the setresuid() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); + */ +/*#define HAS_SETRESUID_PROTO /**/ + +/* HAS_STRFTIME: + * This symbol, if defined, indicates that the strftime routine is + * available to do time formatting. + */ +#define HAS_STRFTIME /**/ + +/* HAS_SYSCALL_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the syscall() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern int syscall(int, ...); + * extern int syscall(long, ...); + */ +/*#define HAS_SYSCALL_PROTO /**/ + +/* U32_ALIGNMENT_REQUIRED: + * This symbol, if defined, indicates that you must access + * character data through U32-aligned pointers. + */ +#define U32_ALIGNMENT_REQUIRED /**/ + +/* HAS_USLEEP_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the usleep() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int usleep(useconds_t); + */ +/*#define HAS_USLEEP_PROTO /**/ + +/* I_FP: + * This symbol, if defined, indicates that <fp.h> exists and + * should be included. + */ +/*#define I_FP /**/ + +/* I_LANGINFO: + * This symbol, if defined, indicates that <langinfo.h> exists and + * should be included. + */ +/*#define I_LANGINFO /**/ + +/* HAS_PTHREAD_ATFORK: + * This symbol, if defined, indicates that the pthread_atfork routine + * is available setup fork handlers. + */ +/*#define HAS_PTHREAD_ATFORK /**/ + +#endif diff --git a/win32/makefile.mk b/win32/makefile.mk index 28c513c64b..1527b27444 100644 --- a/win32/makefile.mk +++ b/win32/makefile.mk @@ -1,12 +1,13 @@ # # Makefile to build perl on Windows NT using DMAKE. # Supported compilers: -# Visual C++ 2.0 thro 6.0 +# Visual C++ 2.0 through 6.0 (and possibly newer versions) # Borland C++ 5.02 # Mingw32 with gcc-2.95.2 or better **experimental** +# MS Platform SDK 64-bit compiler and tools **experimental** # # This is set up to build a perl.exe that runs off a shared library -# (perl57.dll). Also makes individual DLLs for the XS extensions. +# (perl58.dll). Also makes individual DLLs for the XS extensions. # ## @@ -264,10 +265,21 @@ BUILDOPT += -DPERL_IMPLICIT_CONTEXT BUILDOPT += -DPERL_IMPLICIT_SYS .ENDIF -.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE +.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 PROCESSOR_ARCHITECTURE *= x86 +.IF "$(WIN64)" == "" +.IF "$(PROCESSOR_ARCHITEW6432)" != "" +PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432) +WIN64 = define +.ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64" +WIN64 = define +.ELSE +WIN64 = undef +.ENDIF +.ENDIF + .IF "$(USE_5005THREADS)" == "define" ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread .ELIF "$(USE_MULTI)" == "define" @@ -450,14 +462,10 @@ PERLDLL_RES = .IF "$(CFG)" == "Debug" .IF "$(CCTYPE)" == "MSVC20" OPTIMIZE = -Od -MD -Z7 -DDEBUGGING -LINK_DBG = -debug -pdb:none .ELSE -# -Zi requires .pdb file(s) -#OPTIMIZE = -Od -MD -Zi -DDEBUGGING -#LINK_DBG = -debug -OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING -LINK_DBG = -debug -debugtype:both -pdb:none +OPTIMIZE = -O1 -MD -Zi -DDEBUGGING .ENDIF +LINK_DBG = -debug .ELSE .IF "$(CFG)" == "Optimize" # -O1 yields smaller code, which turns out to be faster than -O2 @@ -469,11 +477,25 @@ OPTIMIZE = -Od -MD -DNDEBUG LINK_DBG = -release .ENDIF +.IF "$(WIN64)" == "define" +DEFINES += -DWIN64 -DCONSERVATIVE +OPTIMIZE += -Wp64 -Op +.ENDIF + +.IF "$(USE_PERLCRT)" != "define" +BUILDOPT += -DPERL_MSVCRT_READFIX +.ENDIF + LIBBASEFILES = $(CRYPT_LIB) \ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib + version.lib + +# win64 doesn't have some libs +.IF "$(WIN64)" != "define" +LIBBASEFILES += odbc32.lib odbccp32.lib +.ENDIF # we add LIBC here, since we may be using PerlCRT.dll LIBFILES = $(LIBBASEFILES) $(LIBC) @@ -487,10 +509,6 @@ OBJOUT_FLAG = -Fo EXEOUT_FLAG = -Fe LIBOUT_FLAG = /out: -.IF "$(USE_PERLCRT)" != "define" -BUILDOPT += -DPERL_MSVCRT_READFIX -.ENDIF - .ENDIF CFLAGS_O = $(CFLAGS) $(BUILDOPT) @@ -599,20 +617,24 @@ CFGH_TMPL = config_H.bc CFGSH_TMPL = config.gc CFGH_TMPL = config_H.gc -PERLIMPLIB = ..\libperl57$(a) +PERLIMPLIB = ..\libperl58$(a) .ELSE +.IF "$(WIN64)" == "define" +CFGSH_TMPL = config.vc64 +CFGH_TMPL = config_H.vc64 +.ELSE CFGSH_TMPL = config.vc CFGH_TMPL = config_H.vc +.ENDIF .ENDIF # makedef.pl must be updated if this changes, and this should normally # only change when there is an incompatible revision of the public API. -# XXX so why did we change it from perl56 to perl57? -PERLIMPLIB *= ..\perl57$(a) -PERLDLL = ..\perl57.dll +PERLIMPLIB *= ..\perl58$(a) +PERLDLL = ..\perl58.dll XCOPY = xcopy /f /r /i /d RCOPY = xcopy /f /r /i /e /d diff --git a/win32/perlglob.c b/win32/perlglob.c index be9d55052c..5625294e44 100644 --- a/win32/perlglob.c +++ b/win32/perlglob.c @@ -13,7 +13,7 @@ int main(int argc, char *argv[]) { int i; - int len; + size_t len; char root[MAX_PATH]; char *dummy; char volname[MAX_PATH]; diff --git a/win32/perlhost.h b/win32/perlhost.h index c0b53d6919..dfc1ebf947 100644 --- a/win32/perlhost.h +++ b/win32/perlhost.h @@ -763,14 +763,14 @@ PerlStdIOVprintf(struct IPerlStdIO* piPerl, FILE* pf, const char *format, va_lis return win32_vfprintf(pf, format, arglist); } -long +Off_t PerlStdIOTell(struct IPerlStdIO* piPerl, FILE* pf) { return win32_ftell(pf); } int -PerlStdIOSeek(struct IPerlStdIO* piPerl, FILE* pf, off_t offset, int origin) +PerlStdIOSeek(struct IPerlStdIO* piPerl, FILE* pf, Off_t offset, int origin) { return win32_fseek(pf, offset, origin); } @@ -810,12 +810,12 @@ PerlStdIOInitOSExtras(struct IPerlStdIO* piPerl) } int -PerlStdIOOpenOSfhandle(struct IPerlStdIO* piPerl, long osfhandle, int flags) +PerlStdIOOpenOSfhandle(struct IPerlStdIO* piPerl, intptr_t osfhandle, int flags) { return win32_open_osfhandle(osfhandle, flags); } -int +intptr_t PerlStdIOGetOSfhandle(struct IPerlStdIO* piPerl, int filenum) { return win32_get_osfhandle(filenum); @@ -970,7 +970,7 @@ PerlLIOFlock(struct IPerlLIO* piPerl, int fd, int oper) } int -PerlLIOFileStat(struct IPerlLIO* piPerl, int handle, struct stat *buffer) +PerlLIOFileStat(struct IPerlLIO* piPerl, int handle, Stat_t *buffer) { return win32_fstat(handle, buffer); } @@ -993,14 +993,14 @@ PerlLIOLink(struct IPerlLIO* piPerl, const char*oldname, const char *newname) return win32_link(oldname, newname); } -long -PerlLIOLseek(struct IPerlLIO* piPerl, int handle, long offset, int origin) +Off_t +PerlLIOLseek(struct IPerlLIO* piPerl, int handle, Off_t offset, int origin) { return win32_lseek(handle, offset, origin); } int -PerlLIOLstat(struct IPerlLIO* piPerl, const char *path, struct stat *buffer) +PerlLIOLstat(struct IPerlLIO* piPerl, const char *path, Stat_t *buffer) { return win32_stat(path, buffer); } @@ -1042,7 +1042,7 @@ PerlLIOSetmode(struct IPerlLIO* piPerl, int handle, int mode) } int -PerlLIONameStat(struct IPerlLIO* piPerl, const char *path, struct stat *buffer) +PerlLIONameStat(struct IPerlLIO* piPerl, const char *path, Stat_t *buffer) { return win32_stat(path, buffer); } diff --git a/win32/win32.c b/win32/win32.c index 325531e29f..67aeae68ec 100644 --- a/win32/win32.c +++ b/win32/win32.c @@ -733,7 +733,7 @@ win32_opendir(char *filename) long len; long idx; char scanname[MAX_PATH+3]; - struct stat sbuf; + Stat_t sbuf; WIN32_FIND_DATAA aFindData; WIN32_FIND_DATAW wFindData; HANDLE fh; @@ -1160,7 +1160,7 @@ alien_process: } DllExport int -win32_stat(const char *path, struct stat *sbuf) +win32_stat(const char *path, Stat_t *sbuf) { dTHX; char buffer[MAX_PATH+1]; @@ -1217,10 +1217,18 @@ win32_stat(const char *path, struct stat *sbuf) /* pwbuffer or path will be mapped correctly above */ if (USING_WIDE()) { - res = _wstat(pwbuffer, (struct _stat *)sbuf); +#if defined(WIN64) || defined(USE_LARGE_FILES) + res = _wstati64(pwbuffer, sbuf); +#else + res = _wstat(pwbuffer, sbuf); +#endif } else { +#if defined(WIN64) || defined(USE_LARGE_FILES) + res = _stati64(path, sbuf); +#else res = stat(path, sbuf); +#endif } sbuf->st_nlink = nlink; @@ -1238,7 +1246,7 @@ win32_stat(const char *path, struct stat *sbuf) } if (r != 0xffffffff && (r & FILE_ATTRIBUTE_DIRECTORY)) { /* sbuf may still contain old garbage since stat() failed */ - Zero(sbuf, 1, struct stat); + Zero(sbuf, 1, Stat_t); sbuf->st_mode = S_IFDIR | S_IREAD; errno = 0; if (!(r & FILE_ATTRIBUTE_READONLY)) @@ -2092,7 +2100,7 @@ win32_crypt(const char *txt, const char *salt) #define FTEXT 0x80 /* file handle is in text mode */ /*** -*int my_open_osfhandle(long osfhandle, int flags) - open C Runtime file handle +*int my_open_osfhandle(intptr_t osfhandle, int flags) - open C Runtime file handle * *Purpose: * This function allocates a free C Runtime file handle and associates @@ -2103,7 +2111,7 @@ win32_crypt(const char *txt, const char *salt) * This works with MSVC++ 4.0+ or GCC/Mingw32 * *Entry: -* long osfhandle - Win32 HANDLE to associate with C Runtime file handle. +* intptr_t osfhandle - Win32 HANDLE to associate with C Runtime file handle. * int flags - flags to associate with C Runtime file handle. * *Exit: @@ -2127,7 +2135,7 @@ static int _alloc_osfhnd(void) { HANDLE hF = CreateFile("NUL", 0, 0, NULL, OPEN_ALWAYS, 0, NULL); - int fh = _open_osfhandle((long)hF, 0); + int fh = _open_osfhandle((intptr_t)hF, 0); CloseHandle(hF); if (fh == -1) return fh; @@ -2136,7 +2144,7 @@ _alloc_osfhnd(void) } static int -my_open_osfhandle(long osfhandle, int flags) +my_open_osfhandle(intptr_t osfhandle, int flags) { int fh; char fileflags; /* _osfile flags */ @@ -2489,16 +2497,45 @@ win32_fflush(FILE *pf) return fflush(pf); } -DllExport long +DllExport Off_t win32_ftell(FILE *pf) { +#if defined(WIN64) || defined(USE_LARGE_FILES) + fpos_t pos; + if (fgetpos(pf, &pos)) + return -1; + return (Off_t)pos; +#else return ftell(pf); +#endif } DllExport int -win32_fseek(FILE *pf,long offset,int origin) +win32_fseek(FILE *pf, Off_t offset,int origin) { +#if defined(WIN64) || defined(USE_LARGE_FILES) + fpos_t pos; + switch (origin) { + case SEEK_CUR: + if (fgetpos(pf, &pos)) + return -1; + offset += pos; + break; + case SEEK_END: + fseek(pf, 0, SEEK_END); + pos = _telli64(fileno(pf)); + offset += pos; + break; + case SEEK_SET: + break; + default: + errno = EINVAL; + return -1; + } + return fsetpos(pf, &offset); +#else return fseek(pf, offset, origin); +#endif } DllExport int @@ -2538,7 +2575,7 @@ win32_tmpfile(void) | FILE_FLAG_DELETE_ON_CLOSE, NULL); if (fh != INVALID_HANDLE_VALUE) { - int fd = win32_open_osfhandle((long)fh, 0); + int fd = win32_open_osfhandle((intptr_t)fh, 0); if (fd >= 0) { #if defined(__BORLANDC__) setmode(fd,O_BINARY); @@ -2561,7 +2598,7 @@ win32_abort(void) } DllExport int -win32_fstat(int fd,struct stat *sbufptr) +win32_fstat(int fd, Stat_t *sbufptr) { #ifdef __BORLANDC__ /* A file designated by filehandle is not shown as accessible @@ -2953,16 +2990,24 @@ win32_setmode(int fd, int mode) return setmode(fd, mode); } -DllExport long -win32_lseek(int fd, long offset, int origin) +DllExport Off_t +win32_lseek(int fd, Off_t offset, int origin) { +#if defined(WIN64) || defined(USE_LARGE_FILES) + return _lseeki64(fd, offset, origin); +#else return lseek(fd, offset, origin); +#endif } -DllExport long +DllExport Off_t win32_tell(int fd) { +#if defined(WIN64) || defined(USE_LARGE_FILES) + return _telli64(fd); +#else return tell(fd); +#endif } DllExport int @@ -3887,7 +3932,7 @@ static DWORD pagesize = 0; /* XXX threadead */ static DWORD allocsize = 0; /* XXX threadead */ void * -sbrk(int need) +sbrk(ptrdiff_t need) { void *result; if (!pagesize) @@ -3980,7 +4025,7 @@ win32_free(void *block) int -win32_open_osfhandle(long handle, int flags) +win32_open_osfhandle(intptr_t handle, int flags) { #ifdef USE_FIXED_OSFHANDLE if (IsWin95()) @@ -3989,10 +4034,10 @@ win32_open_osfhandle(long handle, int flags) return _open_osfhandle(handle, flags); } -long +intptr_t win32_get_osfhandle(int fd) { - return _get_osfhandle(fd); + return (intptr_t)_get_osfhandle(fd); } DllExport void* diff --git a/win32/win32.h b/win32/win32.h index 299d8f1ed5..91baa822c8 100644 --- a/win32/win32.h +++ b/win32/win32.h @@ -72,6 +72,7 @@ #include <stdio.h> #include <direct.h> #include <stdlib.h> +#include <stddef.h> #include <fcntl.h> #ifndef EXT #include "EXTERN.h" @@ -200,7 +201,7 @@ struct utsname { typedef long uid_t; typedef long gid_t; typedef unsigned short mode_t; -#pragma warning(disable: 4018 4035 4101 4102 4244 4245 4761) +#pragma warning(disable: 4102) /* "unreferenced label" */ /* Visual C thinks that a pointer to a member variable is 16 bytes in size. */ #define PERL_MEMBER_PTR_SIZE 16 @@ -236,6 +237,16 @@ typedef long gid_t; /* compatibility stuff for other compilers goes here */ +#ifndef _INTPTR_T_DEFINED +typedef int intptr_t; +# define _INTPTR_T_DEFINED +#endif + +#ifndef _UINTPTR_T_DEFINED +typedef unsigned int uintptr_t; +# define _UINTPTR_T_DEFINED +#endif + START_EXTERN_C /* For UNIX compatibility. */ @@ -247,7 +258,10 @@ extern gid_t getegid(void); extern int setuid(uid_t uid); extern int setgid(gid_t gid); extern int kill(int pid, int sig); -extern void *sbrk(int need); +#ifndef USE_PERL_SBRK +extern void *sbrk(ptrdiff_t need); +# define HAS_SBRK_PROTO +#endif extern char * getlogin(void); extern int chown(const char *p, uid_t o, gid_t g); extern int mkstemp(const char *path); @@ -292,7 +306,7 @@ DllExport void win32_get_child_IO(child_IO_table* ptr); extern FILE * my_fdopen(int, char *); #endif extern int my_fclose(FILE *); -extern int my_fstat(int fd, struct stat *sbufptr); +extern int my_fstat(int fd, Stat_t *sbufptr); extern int do_aspawn(void *really, void **mark, void **sp); extern int do_spawn(char *cmd); extern int do_spawn_nowait(char *cmd); @@ -477,7 +491,7 @@ DllExport int win32_async_check(pTHX); * Control structure for lowio file handles */ typedef struct { - long osfhnd; /* underlying OS file HANDLE */ + intptr_t osfhnd;/* underlying OS file HANDLE */ char osfile; /* attributes of file (e.g., open in text mode?) */ char pipech; /* one char buffer for handles opened on pipes */ int lockinitflag; @@ -511,7 +525,7 @@ EXTERN_C _CRTIMP ioinfo* __pioinfo[]; #define _pipech(i) (_pioinfo(i)->pipech) /* since we are not doing a dup2(), this works fine */ -#define _set_osfhnd(fh, osfh) (void)(_osfhnd(fh) = (long)osfh) +#define _set_osfhnd(fh, osfh) (void)(_osfhnd(fh) = (intptr_t)osfh) #endif #endif diff --git a/win32/win32io.c b/win32/win32io.c index 8e74608d3c..d10adb46ef 100644 --- a/win32/win32io.c +++ b/win32/win32io.c @@ -179,7 +179,7 @@ PerlIOWin32_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, IV n, const ch } } if (h != INVALID_HANDLE_VALUE) - fd = win32_open_osfhandle((long) h, PerlIOUnix_oflags(tmode)); + fd = win32_open_osfhandle((intptr_t) h, PerlIOUnix_oflags(tmode)); if (fd >= 0) { PerlIOWin32 *s; @@ -303,7 +303,7 @@ PerlIOWin32_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *params, int flags) if (DuplicateHandle(proc, os->h, proc, &new, 0, FALSE, DUPLICATE_SAME_ACCESS)) { char mode[8]; - int fd = win32_open_osfhandle((long) new, PerlIOUnix_oflags(PerlIO_modestr(o,mode))); + int fd = win32_open_osfhandle((intptr_t) new, PerlIOUnix_oflags(PerlIO_modestr(o,mode))); if (fd >= 0) { f = PerlIOBase_dup(aTHX_ f, o, params, flags); diff --git a/win32/win32iop.h b/win32/win32iop.h index 6ddafa5bb5..ebfb6c21e7 100644 --- a/win32/win32iop.h +++ b/win32/win32iop.h @@ -62,23 +62,23 @@ DllExport int win32_getc(FILE *pf); DllExport int win32_fileno(FILE *pf); DllExport void win32_clearerr(FILE *pf); DllExport int win32_fflush(FILE *pf); -DllExport long win32_ftell(FILE *pf); -DllExport int win32_fseek(FILE *pf,long offset,int origin); +DllExport Off_t win32_ftell(FILE *pf); +DllExport int win32_fseek(FILE *pf,Off_t offset,int origin); DllExport int win32_fgetpos(FILE *pf,fpos_t *p); DllExport int win32_fsetpos(FILE *pf,const fpos_t *p); DllExport void win32_rewind(FILE *pf); DllExport FILE* win32_tmpfile(void); DllExport void win32_abort(void); -DllExport int win32_fstat(int fd,struct stat *sbufptr); -DllExport int win32_stat(const char *name,struct stat *sbufptr); +DllExport int win32_fstat(int fd,Stat_t *sbufptr); +DllExport int win32_stat(const char *name,Stat_t *sbufptr); DllExport int win32_pipe( int *phandles, unsigned int psize, int textmode ); DllExport PerlIO* win32_popen( const char *command, const char *mode ); DllExport PerlIO* win32_popenlist(const char *mode, IV narg, SV **args); DllExport int win32_pclose( PerlIO *pf); DllExport int win32_rename( const char *oname, const char *newname); DllExport int win32_setmode( int fd, int mode); -DllExport long win32_lseek( int fd, long offset, int origin); -DllExport long win32_tell( int fd); +DllExport Off_t win32_lseek( int fd, Off_t offset, int origin); +DllExport Off_t win32_tell( int fd); DllExport int win32_dup( int fd); DllExport int win32_dup2(int h1, int h2); DllExport int win32_open(const char *path, int oflag,...); @@ -111,8 +111,8 @@ DllExport void* win32_calloc(size_t numitems, size_t size); DllExport void* win32_realloc(void *block, size_t size); DllExport void win32_free(void *block); -DllExport int win32_open_osfhandle(long handle, int flags); -DllExport long win32_get_osfhandle(int fd); +DllExport int win32_open_osfhandle(intptr_t handle, int flags); +DllExport intptr_t win32_get_osfhandle(int fd); DllExport DIR* win32_opendir(char *filename); DllExport struct direct* win32_readdir(DIR *dirp); @@ -127,7 +127,7 @@ DllExport int win32_putenv(const char *name); DllExport unsigned win32_sleep(unsigned int); DllExport int win32_times(struct tms *timebuf); DllExport unsigned win32_alarm(unsigned int sec); -DllExport int win32_stat(const char *path, struct stat *buf); +DllExport int win32_stat(const char *path, Stat_t *buf); DllExport char* win32_longpath(char *path); DllExport int win32_ioctl(int i, unsigned int u, char *data); DllExport int win32_link(const char *oldname, const char *newname); diff --git a/win32/win32sck.c b/win32/win32sck.c index 4fb20473b4..70a3038a36 100644 --- a/win32/win32sck.c +++ b/win32/win32sck.c @@ -482,7 +482,7 @@ my_fclose (FILE *pf) #undef fstat int -my_fstat(int fd, struct stat *sbufptr) +my_fstat(int fd, Stat_t *sbufptr) { /* This fixes a bug in fstat() on Windows 9x. fstat() uses the * GetFileType() win32 syscall, which will fail on Windows 9x. @@ -492,8 +492,13 @@ my_fstat(int fd, struct stat *sbufptr) * sbufptr->st_mode. */ int osf; - if (!wsock_started || IsWinNT()) + if (!wsock_started || IsWinNT()) { +#if defined(WIN64) || defined(USE_LARGE_FILES) + return _fstati64(fd, sbufptr); +#else return fstat(fd, sbufptr); +#endif + } osf = TO_SOCKET(fd); if (osf != -1) { @@ -512,11 +517,15 @@ my_fstat(int fd, struct stat *sbufptr) sbufptr->st_nlink = 1; sbufptr->st_uid = sbufptr->st_gid = sbufptr->st_ino = 0; sbufptr->st_atime = sbufptr->st_mtime = sbufptr->st_ctime = 0; - sbufptr->st_size = (off_t)0; + sbufptr->st_size = (Off_t)0; return 0; } } +#if defined(WIN64) || defined(USE_LARGE_FILES) + return _fstati64(fd, sbufptr); +#else return fstat(fd, sbufptr); +#endif } struct hostent * |