Remove win32/config*.gc64nox

The ARCHPREFIX setting from makefile.mk is now passed into config_sh.PL
and config_h.PL and used to apply the changes necessary to the
config*.gc64 files to support both the usual gcc suite and the
x86_64-w64-mingw32-gcc suite (used when GCCCROSS=define).

Also remove the redundant INST_VER argument in the config_h.PL calls.

6 files changed, 18 insertions, 5815 deletions

diff --git a/win32/Makefile b/win32/Makefile
index 11cea595cf..b82f90dbcb 100644
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -853,7 +853,7 @@ regen_config_h:
 	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
 	$(MINIPERL) -I..\lib ..\configpm --chdir=..
 	-del /f $(CFGH_TMPL)
-	-$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
+	-$(MINIPERL) -I..\lib $(ICWD) config_h.PL
 	rename config.h $(CFGH_TMPL)
 
 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
@@ -862,7 +862,7 @@ $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
 	$(XCOPY) ..\*.h $(COREDIR)\*.*
 	$(XCOPY) *.h $(COREDIR)\*.*
 	$(RCOPY) include $(COREDIR)\*.*
-	-$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
+	-$(MINIPERL) -I..\lib $(ICWD) config_h.PL
 	if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
 
 ..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl
diff --git a/win32/config.gc64 b/win32/config.gc64
index 3c4368a985..c0f79bcc5e 100644
--- a/win32/config.gc64
+++ b/win32/config.gc64
@@ -22,7 +22,7 @@ api_revision='~PERL_API_REVISION~'
 api_subversion='~PERL_API_SUBVERSION~'
 api_version='~PERL_API_VERSION~'
 api_versionstring='~PERL_API_REVISION~.~PERL_API_VERSION~.~PERL_API_SUBVERSION~'
-ar='x86_64-w64-mingw32-ar'
+ar='~ARCHPREFIX~ar'
 archlib='~INST_TOP~~INST_VER~\lib~INST_ARCH~'
 archlibexp='~INST_TOP~~INST_VER~\lib~INST_ARCH~'
 archname64=''
@@ -40,7 +40,7 @@ byteorder='1234'
 c=''
 castflags='0'
 cat='type'
-cc='x86_64-w64-mingw32-gcc'
+cc='~ARCHPREFIX~gcc'
 cccdlflags=' '
 ccdlflags=' '
 ccflags='-MD -DWIN32'
@@ -538,7 +538,7 @@ db_version_patch='0'
 defvoidused='15'
 direntrytype='struct direct'
 dlext='dll'
-dlltool='x86_64-w64-mingw32-dlltool'
+dlltool='~ARCHPREFIX~dlltool'
 dlsrc='dl_win32.xs'
 doublesize='8'
 drand01='(rand()/(double)((unsigned)1<<RANDBITS))'
@@ -756,7 +756,7 @@ ivsize='8'
 ivtype='long long'
 known_extensions='~static_ext~ ~dynamic_ext~ ~nonxs_ext~'
 ksh=''
-ld='x86_64-w64-mingw32-g++'
+ld='~ARCHPREFIX~g++'
 lddlflags='-mdll ~LINK_FLAGS~'
 ldflags='~LINK_FLAGS~'
 ldflags_uselargefiles=''
@@ -824,7 +824,7 @@ netdb_hlen_type='int'
 netdb_host_type='char *'
 netdb_name_type='char *'
 netdb_net_type='long'
-nm='x86_64-w64-mingw32-nm'
+nm='~ARCHPREFIX~nm'
 nm_opt=''
 nm_so_opt=''
 nonxs_ext='Errno'
diff --git a/win32/config.gc64nox b/win32/config.gc64nox
deleted file mode 100644
index 9f41cbbd33..0000000000
--- a/win32/config.gc64nox
+++ /dev/null
@@ -1,1093 +0,0 @@
-## Configured by: ~cf_email~
-## Target system: WIN32
-Author=''
-Date='$Date'
-Header=''
-Id='$Id'
-Locker=''
-Log='$Log'
-RCSfile='$RCSfile'
-Revision='$Revision'
-Source=''
-State=''
-_a='.a'
-_exe='.exe'
-_o='.o'
-afs='false'
-afsroot='/afs'
-alignbytes='8'
-ansi2knr=''
-aphostname=''
-api_revision='~PERL_API_REVISION~'
-api_subversion='~PERL_API_SUBVERSION~'
-api_version='~PERL_API_VERSION~'
-api_versionstring='~PERL_API_REVISION~.~PERL_API_VERSION~.~PERL_API_SUBVERSION~'
-ar='ar'
-archlib='~INST_TOP~~INST_VER~\lib~INST_ARCH~'
-archlibexp='~INST_TOP~~INST_VER~\lib~INST_ARCH~'
-archname64=''
-archname='MSWin32'
-archobjs=''
-asctime_r_proto='0'
-awk='awk'
-baserev='5'
-bash=''
-bin='~INST_TOP~~INST_VER~\bin~INST_ARCH~'
-binexp='~INST_TOP~~INST_VER~\bin~INST_ARCH~'
-bison=''
-byacc='byacc'
-byteorder='1234'
-c=''
-castflags='0'
-cat='type'
-cc='gcc'
-cccdlflags=' '
-ccdlflags=' '
-ccflags='-MD -DWIN32'
-ccflags_uselargefiles=''
-ccname='~cc~'
-ccsymbols=''
-ccversion=''
-cf_by='nobody'
-cf_email='nobody@no.where.net'
-cf_time=''
-charbits='8'
-chgrp=''
-chmod=''
-chown=''
-clocktype='clock_t'
-comm=''
-compress=''
-contains='grep'
-cp='copy'
-cpio=''
-cpp='~cc~ -E'
-cpp_stuff='42'
-cppccsymbols=''
-cppflags='-DWIN32'
-cpplast=''
-cppminus='-'
-cpprun='~cc~ -E'
-cppstdin='~cc~ -E'
-cppsymbols=''
-crypt_r_proto='0'
-cryptlib=''
-csh='undef'
-ctermid_r_proto='0'
-ctime_r_proto='0'
-d_Gconvert='sprintf((b),"%.*g",(n),(x))'
-d_PRIEUldbl='undef'
-d_PRIFUldbl='undef'
-d_PRIGUldbl='undef'
-d_PRIXU64='undef'
-d_PRId64='undef'
-d_PRIeldbl='undef'
-d_PRIfldbl='undef'
-d_PRIgldbl='undef'
-d_PRIi64='undef'
-d_PRIo64='undef'
-d_PRIu64='undef'
-d_PRIx64='undef'
-d_SCNfldbl='undef'
-d__fwalk='undef'
-d_access='define'
-d_accessx='undef'
-d_aintl='undef'
-d_alarm='define'
-d_archlib='define'
-d_asctime64='undef'
-d_asctime_r='undef'
-d_atolf='undef'
-d_atoll='define'
-d_attribute_deprecated='undef'
-d_attribute_format='undef'
-d_attribute_malloc='undef'
-d_attribute_nonnull='undef'
-d_attribute_noreturn='undef'
-d_attribute_pure='undef'
-d_attribute_unused='undef'
-d_attribute_warn_unused_result='undef'
-d_bcmp='undef'
-d_bcopy='undef'
-d_bsd='define'
-d_bsdgetpgrp='undef'
-d_bsdsetpgrp='undef'
-d_builtin_choose_expr='undef'
-d_builtin_expect='undef'
-d_bzero='undef'
-d_c99_variadic_macros='undef'
-d_casti32='define'
-d_castneg='define'
-d_charvspr='undef'
-d_chown='undef'
-d_chroot='undef'
-d_chsize='define'
-d_class='undef'
-d_clearenv='undef'
-d_closedir='define'
-d_cmsghdr_s='undef'
-d_const='define'
-d_copysignl='undef'
-d_cplusplus='undef'
-d_crypt='define'
-d_crypt_r='undef'
-d_csh='undef'
-d_ctermid='undef'
-d_ctermid_r='undef'
-d_ctime64='undef'
-d_ctime_r='undef'
-d_cuserid='undef'
-d_dbl_dig='define'
-d_dbminitproto='undef'
-d_difftime64='undef'
-d_difftime='define'
-d_dir_dd_fd='undef'
-d_dirfd='undef'
-d_dirnamlen='define'
-d_dlerror='define'
-d_dlopen='define'
-d_dlsymun='undef'
-d_dosuid='undef'
-d_drand48_r='undef'
-d_drand48proto='undef'
-d_dup2='define'
-d_eaccess='undef'
-d_endgrent='undef'
-d_endgrent_r='undef'
-d_endhent='undef'
-d_endhostent_r='undef'
-d_endnent='undef'
-d_endnetent_r='undef'
-d_endpent='undef'
-d_endprotoent_r='undef'
-d_endpwent='undef'
-d_endpwent_r='undef'
-d_endsent='undef'
-d_endservent_r='undef'
-d_eofnblk='define'
-d_eunice='undef'
-d_faststdio='define'
-d_fchdir='undef'
-d_fchmod='undef'
-d_fchown='undef'
-d_fcntl='undef'
-d_fcntl_can_lock='undef'
-d_fd_macros='define'
-d_fd_set='define'
-d_fds_bits='define'
-d_fgetpos='define'
-d_finite='undef'
-d_finitel='undef'
-d_flexfnam='define'
-d_flock='define'
-d_flockproto='define'
-d_fork='undef'
-d_fp_class='undef'
-d_fpathconf='undef'
-d_fpclass='undef'
-d_fpclassify='undef'
-d_fpclassl='undef'
-d_fpos64_t='undef'
-d_frexpl='undef'
-d_fs_data_s='undef'
-d_fseeko='undef'
-d_fsetpos='define'
-d_fstatfs='undef'
-d_fstatvfs='undef'
-d_fsync='undef'
-d_ftello='undef'
-d_ftime='define'
-d_futimes='undef'
-d_gdbm_ndbm_h_uses_prototypes='undef'
-d_gdbmndbm_h_uses_prototypes='undef'
-d_getaddrinfo='undef'
-d_getcwd='define'
-d_getespwnam='undef'
-d_getfsstat='undef'
-d_getgrent='undef'
-d_getgrent_r='undef'
-d_getgrgid_r='undef'
-d_getgrnam_r='undef'
-d_getgrps='undef'
-d_gethbyaddr='define'
-d_gethbyname='define'
-d_gethent='undef'
-d_gethname='define'
-d_gethostbyaddr_r='undef'
-d_gethostbyname_r='undef'
-d_gethostent_r='undef'
-d_gethostprotos='define'
-d_getitimer='undef'
-d_getlogin='define'
-d_getlogin_r='undef'
-d_getmnt='undef'
-d_getmntent='undef'
-d_getnameinfo='undef'
-d_getnbyaddr='undef'
-d_getnbyname='undef'
-d_getnent='undef'
-d_getnetbyaddr_r='undef'
-d_getnetbyname_r='undef'
-d_getnetent_r='undef'
-d_getnetprotos='undef'
-d_getpagsz='undef'
-d_getpbyname='define'
-d_getpbynumber='define'
-d_getpent='undef'
-d_getpgid='undef'
-d_getpgrp2='undef'
-d_getpgrp='undef'
-d_getppid='undef'
-d_getprior='undef'
-d_getprotobyname_r='undef'
-d_getprotobynumber_r='undef'
-d_getprotoent_r='undef'
-d_getprotoprotos='define'
-d_getprpwnam='undef'
-d_getpwent='undef'
-d_getpwent_r='undef'
-d_getpwnam_r='undef'
-d_getpwuid_r='undef'
-d_getsbyname='define'
-d_getsbyport='define'
-d_getsent='undef'
-d_getservbyname_r='undef'
-d_getservbyport_r='undef'
-d_getservent_r='undef'
-d_getservprotos='define'
-d_getspnam='undef'
-d_getspnam_r='undef'
-d_gettimeod='define'
-d_gmtime64='undef'
-d_gmtime_r='undef'
-d_gnulibc='undef'
-d_grpasswd='undef'
-d_hasmntopt='undef'
-d_htonl='define'
-d_ilogbl='undef'
-d_inc_version_list='undef'
-d_index='undef'
-d_inetaton='undef'
-d_inetntop='undef'
-d_inetpton='undef'
-d_int64_t='undef'
-d_ipv6_mreq='undef'
-d_isascii='define'
-d_isblank='undef'
-d_isfinite='undef'
-d_isinf='undef'
-d_isnan='define'
-d_isnanl='undef'
-d_killpg='define'
-d_lchown='undef'
-d_ldbl_dig='define'
-d_libm_lib_version='undef'
-d_link='define'
-d_localtime64='undef'
-d_localtime_r='undef'
-d_localtime_r_needs_tzset='undef'
-d_locconv='define'
-d_lockf='undef'
-d_longdbl='define'
-d_longlong='define'
-d_lseekproto='define'
-d_lstat='undef'
-d_madvise='undef'
-d_malloc_good_size='undef'
-d_malloc_size='undef'
-d_mblen='define'
-d_mbstowcs='define'
-d_mbtowc='define'
-d_memchr='define'
-d_memcmp='define'
-d_memcpy='define'
-d_memmove='define'
-d_memset='define'
-d_mkdir='define'
-d_mkdtemp='undef'
-d_mkfifo='undef'
-d_mkstemp='undef'
-d_mkstemps='undef'
-d_mktime64='undef'
-d_mktime='define'
-d_mmap='undef'
-d_modfl='undef'
-d_modfl_pow32_bug='undef'
-d_modflproto='undef'
-d_mprotect='undef'
-d_msg='undef'
-d_msg_ctrunc='undef'
-d_msg_dontroute='undef'
-d_msg_oob='undef'
-d_msg_peek='undef'
-d_msg_proxy='undef'
-d_msgctl='undef'
-d_msgget='undef'
-d_msghdr_s='undef'
-d_msgrcv='undef'
-d_msgsnd='undef'
-d_msync='undef'
-d_munmap='undef'
-d_mymalloc='undef'
-d_ndbm='undef'
-d_ndbm_h_uses_prototypes='undef'
-d_nice='undef'
-d_nl_langinfo='undef'
-d_nv_preserves_uv='undef'
-d_nv_zero_is_allbits_zero='define'
-d_off64_t='undef'
-d_old_pthread_create_joinable='undef'
-d_oldpthreads='undef'
-d_oldsock='undef'
-d_open3='undef'
-d_pathconf='undef'
-d_pause='define'
-d_perl_otherlibdirs='undef'
-d_phostname='undef'
-d_pipe='define'
-d_poll='undef'
-d_portable='define'
-d_prctl='undef'
-d_prctl_set_name='undef'
-d_printf_format_null='undef'
-d_procselfexe='undef'
-d_pseudofork='undef'
-d_pthread_atfork='undef'
-d_pthread_attr_setscope='undef'
-d_pthread_yield='undef'
-d_pwage='undef'
-d_pwchange='undef'
-d_pwclass='undef'
-d_pwcomment='undef'
-d_pwexpire='undef'
-d_pwgecos='undef'
-d_pwpasswd='undef'
-d_pwquota='undef'
-d_qgcvt='undef'
-d_quad='define'
-d_random_r='undef'
-d_readdir64_r='undef'
-d_readdir='define'
-d_readdir_r='undef'
-d_readlink='undef'
-d_readv='undef'
-d_recvmsg='undef'
-d_rename='define'
-d_rewinddir='define'
-d_rmdir='define'
-d_safebcpy='undef'
-d_safemcpy='undef'
-d_sanemcmp='define'
-d_sbrkproto='undef'
-d_scalbnl='undef'
-d_sched_yield='undef'
-d_scm_rights='undef'
-d_seekdir='define'
-d_select='define'
-d_sem='undef'
-d_semctl='undef'
-d_semctl_semid_ds='undef'
-d_semctl_semun='undef'
-d_semget='undef'
-d_semop='undef'
-d_sendmsg='undef'
-d_setegid='undef'
-d_seteuid='undef'
-d_setgrent='undef'
-d_setgrent_r='undef'
-d_setgrps='undef'
-d_sethent='undef'
-d_sethostent_r='undef'
-d_setitimer='undef'
-d_setlinebuf='undef'
-d_setlocale='define'
-d_setlocale_r='undef'
-d_setnent='undef'
-d_setnetent_r='undef'
-d_setpent='undef'
-d_setpgid='undef'
-d_setpgrp2='undef'
-d_setpgrp='undef'
-d_setprior='undef'
-d_setproctitle='undef'
-d_setprotoent_r='undef'
-d_setpwent='undef'
-d_setpwent_r='undef'
-d_setregid='undef'
-d_setresgid='undef'
-d_setresuid='undef'
-d_setreuid='undef'
-d_setrgid='undef'
-d_setruid='undef'
-d_setsent='undef'
-d_setservent_r='undef'
-d_setsid='undef'
-d_setvbuf='define'
-d_sfio='undef'
-d_shm='undef'
-d_shmat='undef'
-d_shmatprototype='undef'
-d_shmctl='undef'
-d_shmdt='undef'
-d_shmget='undef'
-d_sigaction='undef'
-d_signbit='undef'
-d_sigprocmask='undef'
-d_sigsetjmp='undef'
-d_sin6_scope_id='define'
-d_sitearch='define'
-d_snprintf='define'
-d_sockaddr_in6='undef'
-d_sockaddr_sa_len='undef'
-d_sockatmark='undef'
-d_sockatmarkproto='undef'
-d_socket='define'
-d_socklen_t='undef'
-d_sockpair='undef'
-d_socks5_init='undef'
-d_sprintf_returns_strlen='define'
-d_sqrtl='undef'
-d_srand48_r='undef'
-d_srandom_r='undef'
-d_sresgproto='undef'
-d_sresuproto='undef'
-d_statblks='undef'
-d_statfs_f_flags='undef'
-d_statfs_s='undef'
-d_static_inline='define'
-d_statvfs='undef'
-d_stdio_cnt_lval='define'
-d_stdio_ptr_lval='define'
-d_stdio_ptr_lval_nochange_cnt='define'
-d_stdio_ptr_lval_sets_cnt='undef'
-d_stdio_stream_array='undef'
-d_stdiobase='define'
-d_stdstdio='define'
-d_strchr='define'
-d_strcoll='define'
-d_strctcpy='define'
-d_strerrm='strerror(e)'
-d_strerror='define'
-d_strerror_r='undef'
-d_strftime='define'
-d_strlcat='undef'
-d_strlcpy='undef'
-d_strtod='define'
-d_strtol='define'
-d_strtold='undef'
-d_strtoll='define'
-d_strtoq='undef'
-d_strtoul='define'
-d_strtoull='define'
-d_strtouq='undef'
-d_strxfrm='define'
-d_suidsafe='undef'
-d_symlink='undef'
-d_syscall='undef'
-d_syscallproto='undef'
-d_sysconf='undef'
-d_sysernlst=''
-d_syserrlst='define'
-d_system='define'
-d_tcgetpgrp='undef'
-d_tcsetpgrp='undef'
-d_telldir='define'
-d_telldirproto='define'
-d_time='define'
-d_timegm='undef'
-d_times='define'
-d_tm_tm_gmtoff='undef'
-d_tm_tm_zone='undef'
-d_tmpnam_r='undef'
-d_truncate='undef'
-d_ttyname_r='undef'
-d_tzname='define'
-d_u32align='define'
-d_ualarm='undef'
-d_umask='define'
-d_uname='define'
-d_union_semun='define'
-d_unordered='undef'
-d_unsetenv='undef'
-d_usleep='undef'
-d_usleepproto='undef'
-d_ustat='undef'
-d_vendorarch='undef'
-d_vendorbin='undef'
-d_vendorlib='undef'
-d_vendorscript='undef'
-d_vfork='undef'
-d_void_closedir='undef'
-d_voidsig='define'
-d_voidtty=''
-d_volatile='define'
-d_vprintf='define'
-d_vsnprintf='define'
-d_wait4='undef'
-d_waitpid='define'
-d_wcstombs='define'
-d_wctomb='define'
-d_writev='undef'
-d_xenix='undef'
-date='date'
-db_hashtype='int'
-db_prefixtype='int'
-db_version_major='0'
-db_version_minor='0'
-db_version_patch='0'
-defvoidused='15'
-direntrytype='struct direct'
-dlext='dll'
-dlltool='dlltool'
-dlsrc='dl_win32.xs'
-doublesize='8'
-drand01='(rand()/(double)((unsigned)1<<RANDBITS))'
-drand48_r_proto='0'
-dtrace=''
-dynamic_ext='Socket IO Fcntl Opcode SDBM_File attributes'
-eagain='EAGAIN'
-ebcdic='undef'
-echo='echo'
-egrep='egrep'
-emacs=''
-endgrent_r_proto='0'
-endhostent_r_proto='0'
-endnetent_r_proto='0'
-endprotoent_r_proto='0'
-endpwent_r_proto='0'
-endservent_r_proto='0'
-eunicefix=':'
-exe_ext='.exe'
-expr='expr'
-extensions='~static_ext~ ~dynamic_ext~ ~nonxs_ext~'
-extern_C='extern'
-extras=''
-fflushNULL='define'
-fflushall='undef'
-find='find'
-firstmakefile='makefile'
-flex=''
-fpossize='8'
-fpostype='fpos_t'
-freetype='void'
-from=':'
-full_ar=''
-full_csh=''
-full_sed=''
-gccansipedantic=''
-gccosandvers=''
-gccversion=''
-getgrent_r_proto='0'
-getgrgid_r_proto='0'
-getgrnam_r_proto='0'
-gethostbyaddr_r_proto='0'
-gethostbyname_r_proto='0'
-gethostent_r_proto='0'
-getlogin_r_proto='0'
-getnetbyaddr_r_proto='0'
-getnetbyname_r_proto='0'
-getnetent_r_proto='0'
-getprotobyname_r_proto='0'
-getprotobynumber_r_proto='0'
-getprotoent_r_proto='0'
-getpwent_r_proto='0'
-getpwnam_r_proto='0'
-getpwuid_r_proto='0'
-getservbyname_r_proto='0'
-getservbyport_r_proto='0'
-getservent_r_proto='0'
-getspnam_r_proto='0'
-gidformat='"ld"'
-gidsign='-1'
-gidsize='4'
-gidtype='gid_t'
-glibpth='/usr/shlib  /lib/pa1.1 /usr/lib/large /lib /usr/lib /usr/lib/386 /lib/386 /lib/large /usr/lib/small /lib/small /usr/ccs/lib /usr/ucblib /usr/shlib '
-gmake='gmake'
-gmtime_r_proto='0'
-gnulibc_version=''
-grep='grep'
-groupcat=''
-groupstype='gid_t'
-gzip='gzip'
-h_fcntl='false'
-h_sysfile='true'
-hint='recommended'
-hostcat='ypcat hosts'
-html1dir=' '
-html1direxp=''
-html3dir=' '
-html3direxp=''
-i16size='2'
-i16type='short'
-i32size='4'
-i32type='long'
-i64size='8'
-i64type='long long'
-i8size='1'
-i8type='char'
-i_arpainet='define'
-i_assert='define'
-i_bsdioctl=''
-i_crypt='undef'
-i_db='undef'
-i_dbm='undef'
-i_dirent='define'
-i_dld='undef'
-i_dlfcn='define'
-i_fcntl='define'
-i_float='define'
-i_fp='undef'
-i_fp_class='undef'
-i_gdbm='undef'
-i_gdbm_ndbm='undef'
-i_gdbmndbm='undef'
-i_grp='undef'
-i_ieeefp='undef'
-i_inttypes='undef'
-i_langinfo='undef'
-i_libutil='undef'
-i_limits='define'
-i_locale='define'
-i_machcthr='undef'
-i_malloc='define'
-i_mallocmalloc='undef'
-i_math='define'
-i_memory='undef'
-i_mntent='undef'
-i_ndbm='undef'
-i_netdb='undef'
-i_neterrno='undef'
-i_netinettcp='undef'
-i_niin='undef'
-i_poll='undef'
-i_prot='undef'
-i_pthread='undef'
-i_pwd='undef'
-i_rpcsvcdbm='define'
-i_sfio='undef'
-i_sgtty='undef'
-i_shadow='undef'
-i_socks='undef'
-i_stdarg='define'
-i_stdbool='undef'
-i_stddef='define'
-i_stdlib='define'
-i_string='define'
-i_sunmath='undef'
-i_sysaccess='undef'
-i_sysdir='undef'
-i_sysfile='undef'
-i_sysfilio='define'
-i_sysin='undef'
-i_sysioctl='undef'
-i_syslog='undef'
-i_sysmman='undef'
-i_sysmode='undef'
-i_sysmount='undef'
-i_sysndir='undef'
-i_sysparam='undef'
-i_syspoll='undef'
-i_sysresrc='undef'
-i_syssecrt='undef'
-i_sysselct='undef'
-i_syssockio='undef'
-i_sysstat='define'
-i_sysstatfs='undef'
-i_sysstatvfs='undef'
-i_systime='undef'
-i_systimek='undef'
-i_systimes='undef'
-i_systypes='define'
-i_sysuio='undef'
-i_sysun='undef'
-i_sysutsname='undef'
-i_sysvfs='undef'
-i_syswait='undef'
-i_termio='undef'
-i_termios='undef'
-i_time='define'
-i_unistd='undef'
-i_ustat='undef'
-i_utime='define'
-i_values='undef'
-i_varargs='undef'
-i_varhdr='varargs.h'
-i_vfork='undef'
-ignore_versioned_solibs=''
-inc_version_list=''
-inc_version_list_init='0'
-incpath=''
-inews=''
-initialinstalllocation=''
-installarchlib='~INST_TOP~~INST_VER~\lib~INST_ARCH~'
-installbin='~INST_TOP~~INST_VER~\bin~INST_ARCH~'
-installhtml1dir=''
-installhtml3dir=''
-installhtmldir='~INST_TOP~~INST_VER~\html'
-installhtmlhelpdir='~INST_TOP~~INST_VER~\htmlhelp'
-installman1dir='~INST_TOP~~INST_VER~\man\man1'
-installman3dir='~INST_TOP~~INST_VER~\man\man3'
-installprefix='~INST_TOP~~INST_VER~'
-installprefixexp='~INST_TOP~~INST_VER~'
-installprivlib='~INST_TOP~~INST_VER~\lib'
-installscript='~INST_TOP~~INST_VER~\bin'
-installsitearch='~INST_TOP~\site~INST_VER~\lib~INST_ARCH~'
-installsitebin='~INST_TOP~~INST_VER~\bin~INST_ARCH~'
-installsitehtml1dir=''
-installsitehtml3dir=''
-installsitelib='~INST_TOP~\site~INST_VER~\lib'
-installsiteman1dir=''
-installsiteman3dir=''
-installsitescript=''
-installstyle='lib'
-installusrbinperl='undef'
-installvendorarch=''
-installvendorbin=''
-installvendorhtml1dir=''
-installvendorhtml3dir=''
-installvendorlib=''
-installvendorman1dir=''
-installvendorman3dir=''
-installvendorscript=''
-intsize='4'
-issymlink=''
-ivdformat='"I64d"'
-ivsize='8'
-ivtype='long long'
-known_extensions='~static_ext~ ~dynamic_ext~ ~nonxs_ext~'
-ksh=''
-ld='g++'
-lddlflags='-mdll ~LINK_FLAGS~'
-ldflags='~LINK_FLAGS~'
-ldflags_uselargefiles=''
-ldlibpthname=''
-less='less'
-lib_ext='.a'
-libc='libmsvcrt.a'
-libperl='libperl.a'
-libpth=''
-libs=''
-libsdirs=''
-libsfiles=''
-libsfound=''
-libspath=''
-libswanted='net socket inet nsl nm ndbm gdbm dbm db malloc dl dld ld sun m c cposix posix ndir dir crypt ucb bsd BSD PW x'
-libswanted_uselargefiles='net socket inet nsl nm ndbm gdbm dbm db malloc dl dld ld sun m c cposix posix ndir dir crypt ucb bsd BSD PW x'
-line='line'
-lint=''
-lkflags=''
-ln=''
-lns='copy'
-localtime_r_proto='0'
-locincpth='/usr/local/include /opt/local/include /usr/gnu/include /opt/gnu/include /usr/GNU/include /opt/GNU/include'
-loclibpth='/usr/local/lib /opt/local/lib /usr/gnu/lib /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib'
-longdblsize='12'
-longlongsize='8'
-longsize='4'
-lp=''
-lpr=''
-ls='dir'
-lseeksize='4'
-lseektype='long'
-mad='undef'
-madlyh=''
-madlyobj=''
-madlysrc=''
-mail=''
-mailx=''
-make='dmake'
-make_set_make='#'
-mallocobj='malloc.o'
-mallocsrc='malloc.c'
-malloctype='void *'
-man1dir='~INST_TOP~~INST_VER~\man\man1'
-man1direxp='~INST_TOP~~INST_VER~\man\man1'
-man1ext='1'
-man3dir='~INST_TOP~~INST_VER~\man\man3'
-man3direxp='~INST_TOP~~INST_VER~\man\man3'
-man3ext='3'
-mips_type=''
-mistrustnm=''
-mkdir='mkdir'
-mmaptype='void *'
-modetype='mode_t'
-more='more /e'
-multiarch='undef'
-mv=''
-myarchname='MSWin32'
-mydomain=''
-myhostname=''
-myuname=''
-n='-n'
-need_va_copy='undef'
-netdb_hlen_type='int'
-netdb_host_type='char *'
-netdb_name_type='char *'
-netdb_net_type='long'
-nm='nm'
-nm_opt=''
-nm_so_opt=''
-nonxs_ext='Errno'
-nroff=''
-nvEUformat='"E"'
-nvFUformat='"F"'
-nvGUformat='"G"'
-nv_overflows_integers_at='256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0'
-nv_preserves_uv_bits='53'
-nveformat='"e"'
-nvfformat='"f"'
-nvgformat='"g"'
-nvsize='8'
-nvtype='double'
-o_nonblock='O_NONBLOCK'
-obj_ext='.o'
-old_pthread_create_joinable=''
-optimize='-O2'
-orderlib='false'
-osname='MSWin32'
-osvers='4.0'
-otherlibdirs=''
-package='perl5'
-pager='more /e'
-passcat=''
-patchlevel='~PERL_VERSION~'
-path_sep=';'
-perl5=''
-perl='perl'
-perl_patchlevel='~PERL_PATCHLEVEL~'
-perl_static_inline='static __inline__'
-perladmin=''
-perllibs='~libs~'
-perlpath='~INST_TOP~~INST_VER~\bin~INST_ARCH~\perl.exe'
-pg=''
-phostname='hostname'
-pidtype='int'
-plibpth=''
-pmake=''
-pr=''
-prefix='~INST_TOP~'
-prefixexp='~INST_TOP~'
-privlib='~INST_TOP~~INST_VER~\lib'
-privlibexp='~INST_TOP~~INST_VER~\lib'
-procselfexe=''
-prototype='define'
-ptrsize='8'
-quadkind='3'
-quadtype='long long'
-randbits='15'
-randfunc='rand'
-random_r_proto='0'
-randseedtype='unsigned'
-ranlib='rem'
-rd_nodata='-1'
-readdir64_r_proto='0'
-readdir_r_proto='0'
-revision='5'
-rm='del'
-rm_try=''
-rmail=''
-run=''
-runnm='true'
-sGMTIME_max="2147483647"
-sGMTIME_min="0"
-sLOCALTIME_max="2147483647"
-sLOCALTIME_min="0"
-sPRIEUldbl='"E"'
-sPRIFUldbl='"F"'
-sPRIGUldbl='"G"'
-sPRIXU64='"I64X"'
-sPRId64='"I64d"'
-sPRIeldbl='"e"'
-sPRIfldbl='"f"'
-sPRIgldbl='"g"'
-sPRIi64='"I64i"'
-sPRIo64='"I64o"'
-sPRIu64='"I64u"'
-sPRIx64='"I64x"'
-sSCNfldbl='"f"'
-sched_yield=''
-scriptdir='~INST_TOP~~INST_VER~\bin'
-scriptdirexp='~INST_TOP~~INST_VER~\bin'
-sed='sed'
-seedfunc='srand'
-selectminbits='32'
-selecttype='Perl_fd_set *'
-sendmail='blat'
-setgrent_r_proto='0'
-sethostent_r_proto='0'
-setlocale_r_proto='0'
-setnetent_r_proto='0'
-setprotoent_r_proto='0'
-setpwent_r_proto='0'
-setservent_r_proto='0'
-sh='cmd /x /c'
-shar=''
-sharpbang='#!'
-shmattype='void *'
-shortsize='2'
-shrpenv=''
-shsharp='true'
-sig_count='26'
-sig_name='ZERO HUP INT QUIT ILL NUM05 NUM06 NUM07 FPE KILL NUM10 SEGV NUM12 PIPE ALRM TERM NUM16 NUM17 NUM18 NUM19 CHLD BREAK ABRT STOP NUM24 CONT CLD'
-sig_name_init='"ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0'
-sig_num='0 1 2 21 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 20'
-sig_num_init='0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0'
-sig_size='27'
-signal_t='void'
-sitearch='~INST_TOP~\site~INST_VER~\lib~INST_ARCH~'
-sitearchexp='~INST_TOP~\site~INST_VER~\lib~INST_ARCH~'
-sitebin='~INST_TOP~\site~INST_VER~\bin~INST_ARCH~'
-sitebinexp='~INST_TOP~\site~INST_VER~\bin~INST_ARCH~'
-sitehtml1dir=''
-sitehtml1direxp=''
-sitehtml3dir=''
-sitehtml3direxp=''
-sitelib='~INST_TOP~\site~INST_VER~\lib'
-sitelib_stem=''
-sitelibexp='~INST_TOP~\site~INST_VER~\lib'
-siteman1dir=''
-siteman1direxp=''
-siteman3dir=''
-siteman3direxp=''
-siteprefix='~INST_TOP~\site~INST_VER~'
-siteprefixexp='~INST_TOP~\site~INST_VER~'
-sitescript=''
-sitescriptexp=''
-sizesize='8'
-sizetype='size_t'
-sleep=''
-smail=''
-so='dll'
-sockethdr=''
-socketlib=''
-socksizetype='int'
-sort='sort'
-spackage='Perl5'
-spitshell=''
-srand48_r_proto='0'
-srandom_r_proto='0'
-src=''
-ssizetype='long long'
-st_ino_sign='1'
-st_ino_size='8'
-startperl='#!perl'
-startsh='#!/bin/sh'
-static_ext=' '
-stdchar='char'
-stdio_base='((fp)->_base)'
-stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)'
-stdio_cnt='((fp)->_cnt)'
-stdio_filbuf=''
-stdio_ptr='((fp)->_ptr)'
-stdio_stream_array=''
-strerror_r_proto='0'
-strings='/usr/include/string.h'
-submit=''
-subversion='~PERL_SUBVERSION~'
-sysman='/usr/man/man1'
-tail=''
-tar=''
-targetarch=''
-tbl=''
-tee=''
-test=''
-timeincl='/usr/include/sys/time.h '
-timetype='time_t'
-tmpnam_r_proto='0'
-to=':'
-touch='touch'
-tr=''
-trnl='\012'
-troff=''
-ttyname_r_proto='0'
-u16size='2'
-u16type='unsigned short'
-u32size='4'
-u32type='unsigned long'
-u64size='8'
-u64type='unsigned long long'
-u8size='1'
-u8type='unsigned char'
-uidformat='"ld"'
-uidsign='-1'
-uidsize='4'
-uidtype='uid_t'
-uname='uname'
-uniq='uniq'
-uquadtype='unsigned long long'
-use5005threads='undef'
-use64bitall='undef'
-use64bitint='define'
-usecrosscompile='undef'
-usedevel='undef'
-usedl='define'
-usedtrace='undef'
-usefaststdio='undef'
-useithreads='undef'
-usekernprocpathname='undef'
-uselargefiles='undef'
-uselongdouble='undef'
-usemallocwrap='define'
-usemorebits='undef'
-usemultiplicity='undef'
-usemymalloc='n'
-usenm='false'
-usensgetexecutablepath='undef'
-useopcode='true'
-useperlio='undef'
-useposix='true'
-usereentrant='undef'
-userelocatableinc='undef'
-usesfio='false'
-useshrplib='true'
-usesitecustomize='undef'
-usesocks='undef'
-usethreads='undef'
-usevendorprefix='undef'
-usevfork='false'
-usrinc='/usr/include'
-uuname=''
-uvXUformat='"I64X"'
-uvoformat='"I64o"'
-uvsize='8'
-uvtype='unsigned long long'
-uvuformat='"I64u"'
-uvxformat='"I64x"'
-vaproto='undef'
-vendorarch=''
-vendorarchexp=''
-vendorbin=''
-vendorbinexp=''
-vendorhtml1dir=' '
-vendorhtml1direxp=''
-vendorhtml3dir=' '
-vendorhtml3direxp=''
-vendorlib=''
-vendorlib_stem=''
-vendorlibexp=''
-vendorman1dir=' '
-vendorman1direxp=''
-vendorman3dir=' '
-vendorman3direxp=''
-vendorprefix=''
-vendorprefixexp=''
-vendorscript=''
-vendorscriptexp=''
-version=''
-version_patchlevel_string=''
-versiononly='undef'
-vi=''
-voidflags='15'
-xlibpth='/usr/lib/386 /lib/386'
-yacc='yacc'
-yaccflags=''
-zcat=''
-zip='zip'
-PERL_REVISION='~PERL_REVISION~'
-PERL_SUBVERSION='~PERL_SUBVERSION~'
-PERL_VERSION='~PERL_VERSION~'
-PERL_API_REVISION='~PERL_API_REVISION~'
-PERL_API_SUBVERSION='~PERL_API_SUBVERSION~'
-PERL_API_VERSION='~PERL_API_VERSION~'
-PERL_PATCHLEVEL='~PERL_PATCHLEVEL~'
-PERL_CONFIG_SH='true'
diff --git a/win32/config_H.gc64nox b/win32/config_H.gc64nox
deleted file mode 100644
index 60f7e3dce9..0000000000
--- a/win32/config_H.gc64nox
+++ /dev/null
@@ -1,4704 +0,0 @@
-/* This file was produced by running the config_h.SH script, which
- * gets its values from undef, which is generally produced by
- * running Configure.
- *
- * Feel free to modify any of this as the need arises.  Note, however,
- * that running config_h.SH again will wipe out any changes you've made.
- * For a more permanent change edit undef and rerun config_h.SH.
- */
-
-/* Package name      : perl5
- * Source directory  : 
- * Configuration time: Thu Sep  1 13:36:38 2011
- * Configured by     : shay
- * Target system     : 
- */
-
-#ifndef _config_h_
-#define _config_h_
-
-/* LOC_SED:
- *	This symbol holds the complete pathname to the sed program.
- */
-#define LOC_SED 	""	/**/
-
-/* HAS_ALARM:
- *	This symbol, if defined, indicates that the alarm routine is
- *	available.
- */
-#define HAS_ALARM		/**/
-
-/* HAS_BCMP:
- *	This symbol is defined if the bcmp() routine is available to
- *	compare blocks of memory.
- */
-/*#define HAS_BCMP	/ **/
-
-/* HAS_BCOPY:
- *	This symbol is defined if the bcopy() routine is available to
- *	copy blocks of memory.
- */
-/*#define HAS_BCOPY	/ **/
-
-/* HAS_BZERO:
- *	This symbol is defined if the bzero() routine is available to
- *	set a memory block to 0.
- */
-/*#define HAS_BZERO	/ **/
-
-/* HAS_CHOWN:
- *	This symbol, if defined, indicates that the chown routine is
- *	available.
- */
-/*#define HAS_CHOWN		/ **/
-
-/* HAS_CHROOT:
- *	This symbol, if defined, indicates that the chroot routine is
- *	available.
- */
-/*#define HAS_CHROOT		/ **/
-
-/* HAS_CHSIZE:
- *	This symbol, if defined, indicates that the chsize routine is available
- *	to truncate files.  You might need a -lx to get this routine.
- */
-#define	HAS_CHSIZE		/**/
-
-/* HAS_CRYPT:
- *	This symbol, if defined, indicates that the crypt routine is available
- *	to encrypt passwords and the like.
- */
-#define HAS_CRYPT		/**/
-
-/* HAS_CTERMID:
- *	This symbol, if defined, indicates that the ctermid routine is
- *	available to generate filename for terminal.
- */
-/*#define HAS_CTERMID		/ **/
-
-/* HAS_CUSERID:
- *	This symbol, if defined, indicates that the cuserid routine is
- *	available to get character login names.
- */
-/*#define HAS_CUSERID		/ **/
-
-/* HAS_DBL_DIG:
- *	This symbol, if defined, indicates that this system's <float.h>
- *	or <limits.h> defines the symbol DBL_DIG, which is the number
- *	of significant digits in a double precision number.  If this
- *	symbol is not defined, a guess of 15 is usually pretty good.
- */
-#define HAS_DBL_DIG 	/**/
-
-/* HAS_DIFFTIME:
- *	This symbol, if defined, indicates that the difftime routine is
- *	available.
- */
-#define HAS_DIFFTIME		/**/
-
-/* HAS_DLERROR:
- *	This symbol, if defined, indicates that the dlerror routine is
- *	available to return a string describing the last error that
- *	occurred from a call to dlopen(), dlclose() or dlsym().
- */
-#define HAS_DLERROR	/**/
-
-/* HAS_DUP2:
- *	This symbol, if defined, indicates that the dup2 routine is
- *	available to duplicate file descriptors.
- */
-#define HAS_DUP2	/**/
-
-/* HAS_FCHMOD:
- *	This symbol, if defined, indicates that the fchmod routine is available
- *	to change mode of opened files.  If unavailable, use chmod().
- */
-/*#define HAS_FCHMOD		/ **/
-
-/* HAS_FCHOWN:
- *	This symbol, if defined, indicates that the fchown routine is available
- *	to change ownership of opened files.  If unavailable, use chown().
- */
-/*#define HAS_FCHOWN		/ **/
-
-/* HAS_FCNTL:
- *	This symbol, if defined, indicates to the C program that
- *	the fcntl() function exists.
- */
-/*#define HAS_FCNTL		/ **/
-
-/* HAS_FGETPOS:
- *	This symbol, if defined, indicates that the fgetpos routine is
- *	available to get the file position indicator, similar to ftell().
- */
-#define HAS_FGETPOS	/**/
-
-/* HAS_FLOCK:
- *	This symbol, if defined, indicates that the flock routine is
- *	available to do file locking.
- */
-#define HAS_FLOCK		/**/
-
-/* HAS_FORK:
- *	This symbol, if defined, indicates that the fork routine is
- *	available.
- */
-/*#define HAS_FORK		/ **/
-
-/* HAS_FSETPOS:
- *	This symbol, if defined, indicates that the fsetpos routine is
- *	available to set the file position indicator, similar to fseek().
- */
-#define HAS_FSETPOS	/**/
-
-/* HAS_GETTIMEOFDAY:
- *	This symbol, if defined, indicates that the gettimeofday() system
- *	call is available for a sub-second accuracy clock. Usually, the file
- *	<sys/resource.h> needs to be included (see I_SYS_RESOURCE).
- *	The type "Timeval" should be used to refer to "struct timeval".
- */
-#define HAS_GETTIMEOFDAY	/**/
-#ifdef HAS_GETTIMEOFDAY
-#define Timeval struct timeval	/* Structure used by gettimeofday() */
-#endif
-
-/* HAS_GETGROUPS:
- *	This symbol, if defined, indicates that the getgroups() routine is
- *	available to get the list of process groups.  If unavailable, multiple
- *	groups are probably not supported.
- */
-/*#define HAS_GETGROUPS		/ **/
-
-/* HAS_GETLOGIN:
- *	This symbol, if defined, indicates that the getlogin routine is
- *	available to get the login name.
- */
-#define HAS_GETLOGIN		/**/
-
-/* HAS_GETPGID:
- *	This symbol, if defined, indicates to the C program that 
- *	the getpgid(pid) function is available to get the
- *	process group id.
- */
-/*#define HAS_GETPGID		/ **/
-
-/* HAS_GETPGRP2:
- *	This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
- *	routine is available to get the current process group.
- */
-/*#define HAS_GETPGRP2		/ **/
-
-/* HAS_GETPPID:
- *	This symbol, if defined, indicates that the getppid routine is
- *	available to get the parent process ID.
- */
-/*#define HAS_GETPPID		/ **/
-
-/* HAS_GETPRIORITY:
- *	This symbol, if defined, indicates that the getpriority routine is
- *	available to get a process's priority.
- */
-/*#define HAS_GETPRIORITY		/ **/
-
-/* HAS_INET_ATON:
- *	This symbol, if defined, indicates to the C program that the
- *	inet_aton() function is available to parse IP address "dotted-quad"
- *	strings.
- */
-/*#define HAS_INET_ATON		/ **/
-
-/* HAS_KILLPG:
- *	This symbol, if defined, indicates that the killpg routine is available
- *	to kill process groups.  If unavailable, you probably should use kill
- *	with a negative process number.
- */
-#define HAS_KILLPG	/**/
-
-/* HAS_LINK:
- *	This symbol, if defined, indicates that the link routine is
- *	available to create hard links.
- */
-#define HAS_LINK	/**/
-
-/* HAS_LOCALECONV:
- *	This symbol, if defined, indicates that the localeconv routine is
- *	available for numeric and monetary formatting conventions.
- */
-#define HAS_LOCALECONV	/**/
-
-/* HAS_LOCKF:
- *	This symbol, if defined, indicates that the lockf routine is
- *	available to do file locking.
- */
-/*#define HAS_LOCKF		/ **/
-
-/* HAS_LSTAT:
- *	This symbol, if defined, indicates that the lstat routine is
- *	available to do file stats on symbolic links.
- */
-/*#define HAS_LSTAT		/ **/
-
-/* HAS_MBLEN:
- *	This symbol, if defined, indicates that the mblen routine is available
- *	to find the number of bytes in a multibye character.
- */
-#define HAS_MBLEN		/**/
-
-/* HAS_MBSTOWCS:
- *	This symbol, if defined, indicates that the mbstowcs routine is
- *	available to covert a multibyte string into a wide character string.
- */
-#define	HAS_MBSTOWCS		/**/
-
-/* HAS_MBTOWC:
- *	This symbol, if defined, indicates that the mbtowc routine is available
- *	to covert a multibyte to a wide character.
- */
-#define HAS_MBTOWC		/**/
-
-/* HAS_MEMCMP:
- *	This symbol, if defined, indicates that the memcmp routine is available
- *	to compare blocks of memory.
- */
-#define HAS_MEMCMP	/**/
-
-/* HAS_MEMCPY:
- *	This symbol, if defined, indicates that the memcpy routine is available
- *	to copy blocks of memory.
- */
-#define HAS_MEMCPY	/**/
-
-/* HAS_MEMMOVE:
- *	This symbol, if defined, indicates that the memmove routine is available
- *	to copy potentially overlapping blocks of memory. This should be used
- *	only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
- *	own version.
- */
-#define HAS_MEMMOVE	/**/
-
-/* HAS_MEMSET:
- *	This symbol, if defined, indicates that the memset routine is available
- *	to set blocks of memory.
- */
-#define HAS_MEMSET	/**/
-
-/* HAS_MKDIR:
- *	This symbol, if defined, indicates that the mkdir routine is available
- *	to create directories.  Otherwise you should fork off a new process to
- *	exec /bin/mkdir.
- */
-#define HAS_MKDIR		/**/
-
-/* HAS_MKFIFO:
- *	This symbol, if defined, indicates that the mkfifo routine is
- *	available to create FIFOs. Otherwise, mknod should be able to
- *	do it for you. However, if mkfifo is there, mknod might require
- *	super-user privileges which mkfifo will not.
- */
-/*#define HAS_MKFIFO		/ **/
-
-/* HAS_MKTIME:
- *	This symbol, if defined, indicates that the mktime routine is
- *	available.
- */
-#define HAS_MKTIME		/**/
-
-/* HAS_MSYNC:
- *	This symbol, if defined, indicates that the msync system call is
- *	available to synchronize a mapped file.
- */
-/*#define HAS_MSYNC		/ **/
-
-/* HAS_MUNMAP:
- *	This symbol, if defined, indicates that the munmap system call is
- *	available to unmap a region, usually mapped by mmap().
- */
-/*#define HAS_MUNMAP		/ **/
-
-/* HAS_NICE:
- *	This symbol, if defined, indicates that the nice routine is
- *	available.
- */
-/*#define HAS_NICE		/ **/
-
-/* HAS_PATHCONF:
- *	This symbol, if defined, indicates that pathconf() is available
- *	to determine file-system related limits and options associated
- *	with a given filename.
- */
-/* HAS_FPATHCONF:
- *	This symbol, if defined, indicates that pathconf() is available
- *	to determine file-system related limits and options associated
- *	with a given open file descriptor.
- */
-/*#define HAS_PATHCONF		/ **/
-/*#define HAS_FPATHCONF		/ **/
-
-/* HAS_PAUSE:
- *	This symbol, if defined, indicates that the pause routine is
- *	available to suspend a process until a signal is received.
- */
-#define HAS_PAUSE		/**/
-
-/* HAS_PIPE:
- *	This symbol, if defined, indicates that the pipe routine is
- *	available to create an inter-process channel.
- */
-#define HAS_PIPE		/**/
-
-/* HAS_POLL:
- *	This symbol, if defined, indicates that the poll routine is
- *	available to poll active file descriptors.  Please check I_POLL and
- *	I_SYS_POLL to know which header should be included as well.
- */
-/*#define HAS_POLL		/ **/
-
-/* HAS_READDIR:
- *	This symbol, if defined, indicates that the readdir routine is
- *	available to read directory entries. You may have to include
- *	<dirent.h>. See I_DIRENT.
- */
-#define HAS_READDIR		/**/
-
-/* HAS_SEEKDIR:
- *	This symbol, if defined, indicates that the seekdir routine is
- *	available. You may have to include <dirent.h>. See I_DIRENT.
- */
-#define HAS_SEEKDIR		/**/
-
-/* HAS_TELLDIR:
- *	This symbol, if defined, indicates that the telldir routine is
- *	available. You may have to include <dirent.h>. See I_DIRENT.
- */
-#define HAS_TELLDIR		/**/
-
-/* HAS_REWINDDIR:
- *	This symbol, if defined, indicates that the rewinddir routine is
- *	available. You may have to include <dirent.h>. See I_DIRENT.
- */
-#define HAS_REWINDDIR		/**/
-
-/* HAS_READLINK:
- *	This symbol, if defined, indicates that the readlink routine is
- *	available to read the value of a symbolic link.
- */
-/*#define HAS_READLINK		/ **/
-
-/* HAS_RENAME:
- *	This symbol, if defined, indicates that the rename routine is available
- *	to rename files.  Otherwise you should do the unlink(), link(), unlink()
- *	trick.
- */
-#define HAS_RENAME	/**/
-
-/* HAS_RMDIR:
- *	This symbol, if defined, indicates that the rmdir routine is
- *	available to remove directories. Otherwise you should fork off a
- *	new process to exec /bin/rmdir.
- */
-#define HAS_RMDIR		/**/
-
-/* HAS_SELECT:
- *	This symbol, if defined, indicates that the select routine is
- *	available to select active file descriptors. If the timeout field
- *	is used, <sys/time.h> may need to be included.
- */
-#define HAS_SELECT	/**/
-
-/* HAS_SETEGID:
- *	This symbol, if defined, indicates that the setegid routine is available
- *	to change the effective gid of the current program.
- */
-/*#define HAS_SETEGID		/ **/
-
-/* HAS_SETEUID:
- *	This symbol, if defined, indicates that the seteuid routine is available
- *	to change the effective uid of the current program.
- */
-/*#define HAS_SETEUID		/ **/
-
-/* HAS_SETGROUPS:
- *	This symbol, if defined, indicates that the setgroups() routine is
- *	available to set the list of process groups.  If unavailable, multiple
- *	groups are probably not supported.
- */
-/*#define HAS_SETGROUPS		/ **/
-
-/* HAS_SETLINEBUF:
- *	This symbol, if defined, indicates that the setlinebuf routine is
- *	available to change stderr or stdout from block-buffered or unbuffered
- *	to a line-buffered mode.
- */
-/*#define HAS_SETLINEBUF		/ **/
-
-/* HAS_SETLOCALE:
- *	This symbol, if defined, indicates that the setlocale routine is
- *	available to handle locale-specific ctype implementations.
- */
-#define HAS_SETLOCALE	/**/
-
-/* HAS_SETPGID:
- *	This symbol, if defined, indicates that the setpgid(pid, gpid)
- *	routine is available to set process group ID.
- */
-/*#define HAS_SETPGID	/ **/
-
-/* HAS_SETPGRP2:
- *	This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
- *	routine is available to set the current process group.
- */
-/*#define HAS_SETPGRP2		/ **/
-
-/* HAS_SETPRIORITY:
- *	This symbol, if defined, indicates that the setpriority routine is
- *	available to set a process's priority.
- */
-/*#define HAS_SETPRIORITY		/ **/
-
-/* HAS_SETREGID:
- *	This symbol, if defined, indicates that the setregid routine is
- *	available to change the real and effective gid of the current
- *	process.
- */
-/* HAS_SETRESGID:
- *	This symbol, if defined, indicates that the setresgid routine is
- *	available to change the real, effective and saved gid of the current
- *	process.
- */
-/*#define HAS_SETREGID		/ **/
-/*#define HAS_SETRESGID		/ **/
-
-/* HAS_SETREUID:
- *	This symbol, if defined, indicates that the setreuid routine is
- *	available to change the real and effective uid of the current
- *	process.
- */
-/* HAS_SETRESUID:
- *	This symbol, if defined, indicates that the setresuid routine is
- *	available to change the real, effective and saved uid of the current
- *	process.
- */
-/*#define HAS_SETREUID		/ **/
-/*#define HAS_SETRESUID		/ **/
-
-/* HAS_SETRGID:
- *	This symbol, if defined, indicates that the setrgid routine is available
- *	to change the real gid of the current program.
- */
-/*#define HAS_SETRGID		/ **/
-
-/* HAS_SETRUID:
- *	This symbol, if defined, indicates that the setruid routine is available
- *	to change the real uid of the current program.
- */
-/*#define HAS_SETRUID		/ **/
-
-/* HAS_SETSID:
- *	This symbol, if defined, indicates that the setsid routine is
- *	available to set the process group ID.
- */
-/*#define HAS_SETSID	/ **/
-
-/* HAS_STRCHR:
- *	This symbol is defined to indicate that the strchr()/strrchr()
- *	functions are available for string searching. If not, try the
- *	index()/rindex() pair.
- */
-/* HAS_INDEX:
- *	This symbol is defined to indicate that the index()/rindex()
- *	functions are available for string searching.
- */
-#define HAS_STRCHR	/**/
-/*#define HAS_INDEX	/ **/
-
-/* HAS_STRCOLL:
- *	This symbol, if defined, indicates that the strcoll routine is
- *	available to compare strings using collating information.
- */
-#define HAS_STRCOLL	/**/
-
-/* HAS_STRTOD:
- *	This symbol, if defined, indicates that the strtod routine is
- *	available to provide better numeric string conversion than atof().
- */
-#define HAS_STRTOD	/**/
-
-/* HAS_STRTOL:
- *	This symbol, if defined, indicates that the strtol routine is available
- *	to provide better numeric string conversion than atoi() and friends.
- */
-#define HAS_STRTOL	/**/
-
-/* HAS_STRXFRM:
- *	This symbol, if defined, indicates that the strxfrm() routine is
- *	available to transform strings.
- */
-#define HAS_STRXFRM	/**/
-
-/* HAS_SYMLINK:
- *	This symbol, if defined, indicates that the symlink routine is available
- *	to create symbolic links.
- */
-/*#define HAS_SYMLINK	/ **/
-
-/* HAS_SYSCALL:
- *	This symbol, if defined, indicates that the syscall routine is
- *	available to call arbitrary system calls. If undefined, that's tough.
- */
-/*#define HAS_SYSCALL	/ **/
-
-/* HAS_SYSCONF:
- *	This symbol, if defined, indicates that sysconf() is available
- *	to determine system related limits and options.
- */
-/*#define HAS_SYSCONF	/ **/
-
-/* HAS_SYSTEM:
- *	This symbol, if defined, indicates that the system routine is
- *	available to issue a shell command.
- */
-#define HAS_SYSTEM	/**/
-
-/* HAS_TCGETPGRP:
- *	This symbol, if defined, indicates that the tcgetpgrp routine is
- *	available to get foreground process group ID.
- */
-/*#define HAS_TCGETPGRP		/ **/
-
-/* HAS_TCSETPGRP:
- *	This symbol, if defined, indicates that the tcsetpgrp routine is
- *	available to set foreground process group ID.
- */
-/*#define HAS_TCSETPGRP		/ **/
-
-/* HAS_TRUNCATE:
- *	This symbol, if defined, indicates that the truncate routine is
- *	available to truncate files.
- */
-/*#define HAS_TRUNCATE	/ **/
-
-/* HAS_TZNAME:
- *	This symbol, if defined, indicates that the tzname[] array is
- *	available to access timezone names.
- */
-#define HAS_TZNAME		/**/
-
-/* HAS_UMASK:
- *	This symbol, if defined, indicates that the umask routine is
- *	available to set and get the value of the file creation mask.
- */
-#define HAS_UMASK		/**/
-
-/* HAS_USLEEP:
- *	This symbol, if defined, indicates that the usleep routine is
- *	available to let the process sleep on a sub-second accuracy.
- */
-/*#define HAS_USLEEP		/ **/
-
-/* HAS_WAIT4:
- *	This symbol, if defined, indicates that wait4() exists.
- */
-/*#define HAS_WAIT4	/ **/
-
-/* HAS_WAITPID:
- *	This symbol, if defined, indicates that the waitpid routine is
- *	available to wait for child process.
- */
-#define HAS_WAITPID	/**/
-
-/* HAS_WCSTOMBS:
- *	This symbol, if defined, indicates that the wcstombs routine is
- *	available to convert wide character strings to multibyte strings.
- */
-#define HAS_WCSTOMBS	/**/
-
-/* HAS_WCTOMB:
- *	This symbol, if defined, indicates that the wctomb routine is available
- *	to covert a wide character to a multibyte.
- */
-#define HAS_WCTOMB		/**/
-
-/* Groups_t:
- *	This symbol holds the type used for the second argument to
- *	getgroups() and setgroups().  Usually, this is the same as
- *	gidtype (gid_t) , but sometimes it isn't.
- *	It can be int, ushort, gid_t, etc... 
- *	It may be necessary to include <sys/types.h> to get any 
- *	typedef'ed information.  This is only required if you have
- *	getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t	/* Type for 2nd arg to [sg]etgroups() */
-#endif
-
-/* I_ARPA_INET:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <arpa/inet.h> to get inet_addr and friends declarations.
- */
-#define	I_ARPA_INET		/**/
-
-/* I_DBM:
- *	This symbol, if defined, indicates that <dbm.h> exists and should
- *	be included.
- */
-/* I_RPCSVC_DBM:
- *	This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
- *	should be included.
- */
-/*#define I_DBM	/ **/
-#define I_RPCSVC_DBM	/**/
-
-/* I_DLFCN:
- *	This symbol, if defined, indicates that <dlfcn.h> exists and should
- *	be included.
- */
-#define I_DLFCN		/**/
-
-/* I_FCNTL:
- *	This manifest constant tells the C program to include <fcntl.h>.
- */
-#define I_FCNTL	/**/
-
-/* I_FLOAT:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <float.h> to get definition of symbols like DBL_MAX or
- *	DBL_MIN, i.e. machine dependent floating point values.
- */
-#define I_FLOAT		/**/
-
-/* I_GDBM:
- *	This symbol, if defined, indicates that <gdbm.h> exists and should
- *	be included.
- */
-/*#define I_GDBM	/ **/
-
-/* I_LIMITS:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <limits.h> to get definition of symbols like WORD_BIT or
- *	LONG_MAX, i.e. machine dependant limitations.
- */
-#define I_LIMITS		/**/
-
-/* I_LOCALE:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <locale.h>.
- */
-#define	I_LOCALE		/**/
-
-/* I_MATH:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <math.h>.
- */
-#define I_MATH		/**/
-
-/* I_MEMORY:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <memory.h>.
- */
-/*#define I_MEMORY		/ **/
-
-/* I_NETINET_IN:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
- */
-/*#define I_NETINET_IN	/ **/
-
-/* I_SFIO:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sfio.h>.
- */
-/*#define	I_SFIO		/ **/
-
-/* I_STDDEF:
- *	This symbol, if defined, indicates that <stddef.h> exists and should
- *	be included.
- */
-#define I_STDDEF	/**/
-
-/* I_STDLIB:
- *	This symbol, if defined, indicates that <stdlib.h> exists and should
- *	be included.
- */
-#define I_STDLIB		/**/
-
-/* I_STRING:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <string.h> (USG systems) instead of <strings.h> (BSD systems).
- */
-#define I_STRING		/**/
-
-/* I_SYS_DIR:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/dir.h>.
- */
-/*#define I_SYS_DIR		/ **/
-
-/* I_SYS_FILE:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/file.h> to get definition of R_OK and friends.
- */
-/*#define I_SYS_FILE		/ **/
-
-/* I_SYS_IOCTL:
- *	This symbol, if defined, indicates that <sys/ioctl.h> exists and should
- *	be included. Otherwise, include <sgtty.h> or <termio.h>.
- */
-/* I_SYS_SOCKIO:
- *	This symbol, if defined, indicates the <sys/sockio.h> should be included
- *	to get socket ioctl options, like SIOCATMARK.
- */
-/*#define	I_SYS_IOCTL		/ **/
-/*#define I_SYS_SOCKIO	/ **/
-
-/* I_SYS_NDIR:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/ndir.h>.
- */
-/*#define I_SYS_NDIR	/ **/
-
-/* I_SYS_PARAM:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/param.h>.
- */
-/*#define I_SYS_PARAM		/ **/
-
-/* I_SYS_POLL:
- *	This symbol, if defined, indicates that the program may include
- *	<sys/poll.h>.  When I_POLL is also defined, it's probably safest
- *	to only include <poll.h>.
- */
-/*#define I_SYS_POLL	/ **/
-
-/* I_SYS_RESOURCE:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/resource.h>.
- */
-/*#define I_SYS_RESOURCE		/ **/
-
-/* I_SYS_SELECT:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/select.h> in order to get definition of struct timeval.
- */
-/*#define I_SYS_SELECT	/ **/
-
-/* I_SYS_STAT:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/stat.h>.
- */
-#define	I_SYS_STAT		/**/
-
-/* I_SYS_TIMES:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/times.h>.
- */
-/*#define	I_SYS_TIMES		/ **/
-
-/* I_SYS_TYPES:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/types.h>.
- */
-#define	I_SYS_TYPES		/**/
-
-/* I_SYS_UN:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/un.h> to get UNIX domain socket definitions.
- */
-/*#define I_SYS_UN		/ **/
-
-/* I_SYS_WAIT:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/wait.h>.
- */
-/*#define I_SYS_WAIT	/ **/
-
-/* I_TERMIO:
- *	This symbol, if defined, indicates that the program should include
- *	<termio.h> rather than <sgtty.h>.  There are also differences in
- *	the ioctl() calls that depend on the value of this symbol.
- */
-/* I_TERMIOS:
- *	This symbol, if defined, indicates that the program should include
- *	the POSIX termios.h rather than sgtty.h or termio.h.
- *	There are also differences in the ioctl() calls that depend on the
- *	value of this symbol.
- */
-/* I_SGTTY:
- *	This symbol, if defined, indicates that the program should include
- *	<sgtty.h> rather than <termio.h>.  There are also differences in
- *	the ioctl() calls that depend on the value of this symbol.
- */
-/*#define I_TERMIO		/ **/
-/*#define I_TERMIOS		/ **/
-/*#define I_SGTTY		/ **/
-
-/* I_UNISTD:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <unistd.h>.
- */
-/*#define I_UNISTD		/ **/
-
-/* I_UTIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <utime.h>.
- */
-#define I_UTIME		/**/
-
-/* I_VALUES:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <values.h> to get definition of symbols like MINFLOAT or
- *	MAXLONG, i.e. machine dependant limitations.  Probably, you
- *	should use <limits.h> instead, if it is available.
- */
-/*#define I_VALUES		/ **/
-
-/* I_VFORK:
- *	This symbol, if defined, indicates to the C program that it should
- *	include vfork.h.
- */
-/*#define I_VFORK	/ **/
-
-/* CAN_VAPROTO:
- *	This variable is defined on systems supporting prototype declaration
- *	of functions with a variable number of arguments.
- */
-/* _V:
- *	This macro is used to declare function parameters in prototypes for
- *	functions with a variable number of parameters. Use double parentheses.
- *	For example:
- *
- *		int printf _V((char *fmt, ...));
- *
- *	Remember to use the plain simple _() macro when declaring a function
- *	with no variable number of arguments, since it might be possible to
- *	have a non-effect _V() macro and still get prototypes via _().
- */
-/*#define CAN_VAPROTO	/ **/
-#ifdef CAN_VAPROTO
-#define	_V(args) args
-#else
-#define	_V(args) ()
-#endif
-
-/* INTSIZE:
- *	This symbol contains the value of sizeof(int) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- *	This symbol contains the value of sizeof(long) so that the C
- *	preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- *	This symbol contains the value of sizeof(short) so that the C
- *	preprocessor can make decisions based on it.
- */
-#define INTSIZE 4		/**/
-#define LONGSIZE 4		/**/
-#define SHORTSIZE 2		/**/
-
-/* MULTIARCH:
- *	This symbol, if defined, signifies that the build
- *	process will produce some binary files that are going to be
- *	used in a cross-platform environment.  This is the case for
- *	example with the NeXT "fat" binaries that contain executables
- *	for several CPUs.
- */
-/*#define MULTIARCH		/ **/
-
-/* HAS_QUAD:
- *	This symbol, if defined, tells that there's a 64-bit integer type,
- *	Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one
- *	of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
- *	or QUAD_IS___INT64.
- */
-#define HAS_QUAD	/**/
-#ifdef HAS_QUAD
-#   define Quad_t long long	/**/
-#   define Uquad_t unsigned long long	/**/
-#   define QUADKIND 3	/**/
-#   define QUAD_IS_INT	1
-#   define QUAD_IS_LONG	2
-#   define QUAD_IS_LONG_LONG	3
-#   define QUAD_IS_INT64_T	4
-#   define QUAD_IS___INT64	5
-#endif
-
-/* USE_CROSS_COMPILE:
- *	This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- *	This symbol, if defined, indicates the target architecture
- *	Perl has been cross-compiled to.  Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-/*#define	USE_CROSS_COMPILE	/ **/
-#define	PERL_TARGETARCH	""	/**/
-#endif
-
-/* MEM_ALIGNBYTES:
- *	This symbol contains the number of bytes required to align a
- *	double, or a long double when applicable. Usual values are 2,
- *	4 and 8. The default is eight, for safety.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-#  define MEM_ALIGNBYTES 8
-#else
-#define MEM_ALIGNBYTES 8
-#endif
-
-/* ARCHLIB:
- *	This variable, if defined, holds the name of the directory in
- *	which the user wants to put architecture-dependent public
- *	library files for perl5.  It is most often a local directory
- *	such as /usr/local/lib.  Programs using this variable must be
- *	prepared to deal with filename expansion.  If ARCHLIB is the
- *	same as PRIVLIB, it is not defined, since presumably the
- *	program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- *	This symbol contains the ~name expanded version of ARCHLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB "c:\\perl\\lib"		/**/
-/*#define ARCHLIB_EXP ""	/ **/
-
-/* ARCHNAME:
- *	This symbol holds a string representing the architecture name.
- *	It may be used to construct an architecture-dependant pathname
- *	where library files may be held under a private library, for
- *	instance.
- */
-#define ARCHNAME "MSWin32-x86"		/**/
-
-/* BIN:
- *	This symbol holds the path of the bin directory where the package will
- *	be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- *	This symbol is the filename expanded version of the BIN symbol, for
- *	programs that do not want to deal with that at run-time.
- */
-/* PERL_RELOCATABLE_INC:
- *	This symbol, if defined, indicates that we'd like to relocate entries
- *	in @INC at run time based on the location of the perl binary.
- */
-#define BIN "c:\\perl\\bin"	/**/
-#define BIN_EXP "c:\\perl\\bin"	/**/
-#define PERL_RELOCATABLE_INC "undef" 		/**/
-
-/* BYTEORDER:
- *	This symbol holds the hexadecimal constant defined in byteorder,
- *	in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
- *	If the compiler supports cross-compiling or multiple-architecture
- *	binaries (eg. on NeXT systems), use compiler-defined macros to
- *	determine the byte order.
- *	On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- *	Binaries (MAB) on either big endian or little endian machines.
- *	The endian-ness is available at compile-time.  This only matters
- *	for perl, where the config.h can be generated and installed on
- *	one system, and used by a different architecture to build an
- *	extension.  Older versions of NeXT that might not have
- *	defined either *_ENDIAN__ were all on Motorola 680x0 series,
- *	so the default case (for NeXT) is big endian to catch them.
- *	This might matter for NeXT 3.0.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-#  ifdef __LITTLE_ENDIAN__
-#    if LONGSIZE == 4
-#      define BYTEORDER 0x1234
-#    else
-#      if LONGSIZE == 8
-#        define BYTEORDER 0x12345678
-#      endif
-#    endif
-#  else
-#    ifdef __BIG_ENDIAN__
-#      if LONGSIZE == 4
-#        define BYTEORDER 0x4321
-#      else
-#        if LONGSIZE == 8
-#          define BYTEORDER 0x87654321
-#        endif
-#      endif
-#    endif
-#  endif
-#  if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-#    define BYTEORDER 0x4321
-#  endif
-#else
-#define BYTEORDER 0x1234	/* large digits for MSB */
-#endif /* NeXT */
-
-/* CHARBITS:
- *	This symbol contains the size of a char, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define CHARBITS 8		/**/
-
-/* HAS_ACCESSX:
- *	This symbol, if defined, indicates that the accessx routine is
- *	available to do extended access checks.
- */
-/*#define HAS_ACCESSX		/ **/
-
-/* HAS_ASCTIME_R:
- *	This symbol, if defined, indicates that the asctime_r routine
- *	is available to asctime re-entrantly.
- */
-/* ASCTIME_R_PROTO:
- *	This symbol encodes the prototype of asctime_r.
- *	It is zero if d_asctime_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
- *	is defined.
- */
-/*#define HAS_ASCTIME_R	   / **/
-#define ASCTIME_R_PROTO 0	   /**/
-
-/* CASTI32:
- *	This symbol is defined if the C compiler can cast negative
- *	or large floating point numbers to 32-bit ints.
- */
-#define	CASTI32		/**/
-
-/* CASTNEGFLOAT:
- *	This symbol is defined if the C compiler can cast negative
- *	numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- *	This symbol contains flags that say what difficulties the compiler
- *	has casting odd floating values to unsigned long:
- *		0 = ok
- *		1 = couldn't cast < 0
- *		2 = couldn't cast >= 0x80000000
- *		4 = couldn't cast in argument expression list
- */
-#define	CASTNEGFLOAT		/**/
-#define CASTFLAGS 0		/**/
-
-/* VOID_CLOSEDIR:
- *	This symbol, if defined, indicates that the closedir() routine
- *	does not return a value.
- */
-/*#define VOID_CLOSEDIR		/ **/
-
-/* HAS_CRYPT_R:
- *	This symbol, if defined, indicates that the crypt_r routine
- *	is available to crypt re-entrantly.
- */
-/* CRYPT_R_PROTO:
- *	This symbol encodes the prototype of crypt_r.
- *	It is zero if d_crypt_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
- *	is defined.
- */
-/*#define HAS_CRYPT_R	   / **/
-#define CRYPT_R_PROTO 0	   /**/
-
-/* HAS_CTERMID_R:
- *	This symbol, if defined, indicates that the ctermid_r routine
- *	is available to ctermid re-entrantly.
- */
-/* CTERMID_R_PROTO:
- *	This symbol encodes the prototype of ctermid_r.
- *	It is zero if d_ctermid_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
- *	is defined.
- */
-/*#define HAS_CTERMID_R	   / **/
-#define CTERMID_R_PROTO 0	   /**/
-
-/* HAS_CTIME_R:
- *	This symbol, if defined, indicates that the ctime_r routine
- *	is available to ctime re-entrantly.
- */
-/* CTIME_R_PROTO:
- *	This symbol encodes the prototype of ctime_r.
- *	It is zero if d_ctime_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
- *	is defined.
- */
-/*#define HAS_CTIME_R	   / **/
-#define CTIME_R_PROTO 0	   /**/
-
-/* HAS_DRAND48_R:
- *	This symbol, if defined, indicates that the drand48_r routine
- *	is available to drand48 re-entrantly.
- */
-/* DRAND48_R_PROTO:
- *	This symbol encodes the prototype of drand48_r.
- *	It is zero if d_drand48_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
- *	is defined.
- */
-/*#define HAS_DRAND48_R	   / **/
-#define DRAND48_R_PROTO 0	   /**/
-
-/* HAS_EACCESS:
- *	This symbol, if defined, indicates that the eaccess routine is
- *	available to do extended access checks.
- */
-/*#define HAS_EACCESS		/ **/
-
-/* HAS_ENDGRENT_R:
- *	This symbol, if defined, indicates that the endgrent_r routine
- *	is available to endgrent re-entrantly.
- */
-/* ENDGRENT_R_PROTO:
- *	This symbol encodes the prototype of endgrent_r.
- *	It is zero if d_endgrent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
- *	is defined.
- */
-/*#define HAS_ENDGRENT_R	   / **/
-#define ENDGRENT_R_PROTO 0	   /**/
-
-/* HAS_ENDHOSTENT_R:
- *	This symbol, if defined, indicates that the endhostent_r routine
- *	is available to endhostent re-entrantly.
- */
-/* ENDHOSTENT_R_PROTO:
- *	This symbol encodes the prototype of endhostent_r.
- *	It is zero if d_endhostent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
- *	is defined.
- */
-/*#define HAS_ENDHOSTENT_R	   / **/
-#define ENDHOSTENT_R_PROTO 0	   /**/
-
-/* HAS_ENDNETENT_R:
- *	This symbol, if defined, indicates that the endnetent_r routine
- *	is available to endnetent re-entrantly.
- */
-/* ENDNETENT_R_PROTO:
- *	This symbol encodes the prototype of endnetent_r.
- *	It is zero if d_endnetent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
- *	is defined.
- */
-/*#define HAS_ENDNETENT_R	   / **/
-#define ENDNETENT_R_PROTO 0	   /**/
-
-/* HAS_ENDPROTOENT_R:
- *	This symbol, if defined, indicates that the endprotoent_r routine
- *	is available to endprotoent re-entrantly.
- */
-/* ENDPROTOENT_R_PROTO:
- *	This symbol encodes the prototype of endprotoent_r.
- *	It is zero if d_endprotoent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
- *	is defined.
- */
-/*#define HAS_ENDPROTOENT_R	   / **/
-#define ENDPROTOENT_R_PROTO 0	   /**/
-
-/* HAS_ENDPWENT_R:
- *	This symbol, if defined, indicates that the endpwent_r routine
- *	is available to endpwent re-entrantly.
- */
-/* ENDPWENT_R_PROTO:
- *	This symbol encodes the prototype of endpwent_r.
- *	It is zero if d_endpwent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
- *	is defined.
- */
-/*#define HAS_ENDPWENT_R	   / **/
-#define ENDPWENT_R_PROTO 0	   /**/
-
-/* HAS_ENDSERVENT_R:
- *	This symbol, if defined, indicates that the endservent_r routine
- *	is available to endservent re-entrantly.
- */
-/* ENDSERVENT_R_PROTO:
- *	This symbol encodes the prototype of endservent_r.
- *	It is zero if d_endservent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
- *	is defined.
- */
-/*#define HAS_ENDSERVENT_R	   / **/
-#define ENDSERVENT_R_PROTO 0	   /**/
-
-/* HAS_FD_SET:
- *	This symbol, when defined, indicates presence of the fd_set typedef
- *	in <sys/types.h>
- */
-#define HAS_FD_SET	/**/
-
-/* Gconvert:
- *	This preprocessor macro is defined to convert a floating point
- *	number to a string without a trailing decimal point.  This
- *	emulates the behavior of sprintf("%g"), but is sometimes much more
- *	efficient.  If gconvert() is not available, but gcvt() drops the
- *	trailing decimal point, then gcvt() is used.  If all else fails,
- *	a macro using sprintf("%g") is used. Arguments for the Gconvert
- *	macro are: value, number of digits, whether trailing zeros should
- *	be retained, and the output buffer.
- *	The usual values are:
- *		d_Gconvert='gconvert((x),(n),(t),(b))'
- *		d_Gconvert='gcvt((x),(n),(b))'
- *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- *	The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GETGRENT_R:
- *	This symbol, if defined, indicates that the getgrent_r routine
- *	is available to getgrent re-entrantly.
- */
-/* GETGRENT_R_PROTO:
- *	This symbol encodes the prototype of getgrent_r.
- *	It is zero if d_getgrent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
- *	is defined.
- */
-/*#define HAS_GETGRENT_R	   / **/
-#define GETGRENT_R_PROTO 0	   /**/
-
-/* HAS_GETGRGID_R:
- *	This symbol, if defined, indicates that the getgrgid_r routine
- *	is available to getgrgid re-entrantly.
- */
-/* GETGRGID_R_PROTO:
- *	This symbol encodes the prototype of getgrgid_r.
- *	It is zero if d_getgrgid_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
- *	is defined.
- */
-/*#define HAS_GETGRGID_R	   / **/
-#define GETGRGID_R_PROTO 0	   /**/
-
-/* HAS_GETGRNAM_R:
- *	This symbol, if defined, indicates that the getgrnam_r routine
- *	is available to getgrnam re-entrantly.
- */
-/* GETGRNAM_R_PROTO:
- *	This symbol encodes the prototype of getgrnam_r.
- *	It is zero if d_getgrnam_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
- *	is defined.
- */
-/*#define HAS_GETGRNAM_R	   / **/
-#define GETGRNAM_R_PROTO 0	   /**/
-
-/* HAS_GETHOSTBYADDR_R:
- *	This symbol, if defined, indicates that the gethostbyaddr_r routine
- *	is available to gethostbyaddr re-entrantly.
- */
-/* GETHOSTBYADDR_R_PROTO:
- *	This symbol encodes the prototype of gethostbyaddr_r.
- *	It is zero if d_gethostbyaddr_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
- *	is defined.
- */
-/*#define HAS_GETHOSTBYADDR_R	   / **/
-#define GETHOSTBYADDR_R_PROTO 0	   /**/
-
-/* HAS_GETHOSTBYNAME_R:
- *	This symbol, if defined, indicates that the gethostbyname_r routine
- *	is available to gethostbyname re-entrantly.
- */
-/* GETHOSTBYNAME_R_PROTO:
- *	This symbol encodes the prototype of gethostbyname_r.
- *	It is zero if d_gethostbyname_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
- *	is defined.
- */
-/*#define HAS_GETHOSTBYNAME_R	   / **/
-#define GETHOSTBYNAME_R_PROTO 0	   /**/
-
-/* HAS_GETHOSTENT_R:
- *	This symbol, if defined, indicates that the gethostent_r routine
- *	is available to gethostent re-entrantly.
- */
-/* GETHOSTENT_R_PROTO:
- *	This symbol encodes the prototype of gethostent_r.
- *	It is zero if d_gethostent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
- *	is defined.
- */
-/*#define HAS_GETHOSTENT_R	   / **/
-#define GETHOSTENT_R_PROTO 0	   /**/
-
-/* HAS_GETLOGIN_R:
- *	This symbol, if defined, indicates that the getlogin_r routine
- *	is available to getlogin re-entrantly.
- */
-/* GETLOGIN_R_PROTO:
- *	This symbol encodes the prototype of getlogin_r.
- *	It is zero if d_getlogin_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
- *	is defined.
- */
-/*#define HAS_GETLOGIN_R	   / **/
-#define GETLOGIN_R_PROTO 0	   /**/
-
-/* HAS_GETNETBYADDR_R:
- *	This symbol, if defined, indicates that the getnetbyaddr_r routine
- *	is available to getnetbyaddr re-entrantly.
- */
-/* GETNETBYADDR_R_PROTO:
- *	This symbol encodes the prototype of getnetbyaddr_r.
- *	It is zero if d_getnetbyaddr_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
- *	is defined.
- */
-/*#define HAS_GETNETBYADDR_R	   / **/
-#define GETNETBYADDR_R_PROTO 0	   /**/
-
-/* HAS_GETNETBYNAME_R:
- *	This symbol, if defined, indicates that the getnetbyname_r routine
- *	is available to getnetbyname re-entrantly.
- */
-/* GETNETBYNAME_R_PROTO:
- *	This symbol encodes the prototype of getnetbyname_r.
- *	It is zero if d_getnetbyname_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
- *	is defined.
- */
-/*#define HAS_GETNETBYNAME_R	   / **/
-#define GETNETBYNAME_R_PROTO 0	   /**/
-
-/* HAS_GETNETENT_R:
- *	This symbol, if defined, indicates that the getnetent_r routine
- *	is available to getnetent re-entrantly.
- */
-/* GETNETENT_R_PROTO:
- *	This symbol encodes the prototype of getnetent_r.
- *	It is zero if d_getnetent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
- *	is defined.
- */
-/*#define HAS_GETNETENT_R	   / **/
-#define GETNETENT_R_PROTO 0	   /**/
-
-/* HAS_GETPAGESIZE:
- *	This symbol, if defined, indicates that the getpagesize system call
- *	is available to get system page size, which is the granularity of
- *	many memory management calls.
- */
-/*#define HAS_GETPAGESIZE		/ **/
-
-/* HAS_GETPROTOBYNAME_R:
- *	This symbol, if defined, indicates that the getprotobyname_r routine
- *	is available to getprotobyname re-entrantly.
- */
-/* GETPROTOBYNAME_R_PROTO:
- *	This symbol encodes the prototype of getprotobyname_r.
- *	It is zero if d_getprotobyname_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
- *	is defined.
- */
-/*#define HAS_GETPROTOBYNAME_R	   / **/
-#define GETPROTOBYNAME_R_PROTO 0	   /**/
-
-/* HAS_GETPROTOBYNUMBER_R:
- *	This symbol, if defined, indicates that the getprotobynumber_r routine
- *	is available to getprotobynumber re-entrantly.
- */
-/* GETPROTOBYNUMBER_R_PROTO:
- *	This symbol encodes the prototype of getprotobynumber_r.
- *	It is zero if d_getprotobynumber_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
- *	is defined.
- */
-/*#define HAS_GETPROTOBYNUMBER_R	   / **/
-#define GETPROTOBYNUMBER_R_PROTO 0	   /**/
-
-/* HAS_GETPROTOENT_R:
- *	This symbol, if defined, indicates that the getprotoent_r routine
- *	is available to getprotoent re-entrantly.
- */
-/* GETPROTOENT_R_PROTO:
- *	This symbol encodes the prototype of getprotoent_r.
- *	It is zero if d_getprotoent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
- *	is defined.
- */
-/*#define HAS_GETPROTOENT_R	   / **/
-#define GETPROTOENT_R_PROTO 0	   /**/
-
-/* HAS_GETPWENT_R:
- *	This symbol, if defined, indicates that the getpwent_r routine
- *	is available to getpwent re-entrantly.
- */
-/* GETPWENT_R_PROTO:
- *	This symbol encodes the prototype of getpwent_r.
- *	It is zero if d_getpwent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
- *	is defined.
- */
-/*#define HAS_GETPWENT_R	   / **/
-#define GETPWENT_R_PROTO 0	   /**/
-
-/* HAS_GETPWNAM_R:
- *	This symbol, if defined, indicates that the getpwnam_r routine
- *	is available to getpwnam re-entrantly.
- */
-/* GETPWNAM_R_PROTO:
- *	This symbol encodes the prototype of getpwnam_r.
- *	It is zero if d_getpwnam_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
- *	is defined.
- */
-/*#define HAS_GETPWNAM_R	   / **/
-#define GETPWNAM_R_PROTO 0	   /**/
-
-/* HAS_GETPWUID_R:
- *	This symbol, if defined, indicates that the getpwuid_r routine
- *	is available to getpwuid re-entrantly.
- */
-/* GETPWUID_R_PROTO:
- *	This symbol encodes the prototype of getpwuid_r.
- *	It is zero if d_getpwuid_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
- *	is defined.
- */
-/*#define HAS_GETPWUID_R	   / **/
-#define GETPWUID_R_PROTO 0	   /**/
-
-/* HAS_GETSERVBYNAME_R:
- *	This symbol, if defined, indicates that the getservbyname_r routine
- *	is available to getservbyname re-entrantly.
- */
-/* GETSERVBYNAME_R_PROTO:
- *	This symbol encodes the prototype of getservbyname_r.
- *	It is zero if d_getservbyname_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
- *	is defined.
- */
-/*#define HAS_GETSERVBYNAME_R	   / **/
-#define GETSERVBYNAME_R_PROTO 0	   /**/
-
-/* HAS_GETSERVBYPORT_R:
- *	This symbol, if defined, indicates that the getservbyport_r routine
- *	is available to getservbyport re-entrantly.
- */
-/* GETSERVBYPORT_R_PROTO:
- *	This symbol encodes the prototype of getservbyport_r.
- *	It is zero if d_getservbyport_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
- *	is defined.
- */
-/*#define HAS_GETSERVBYPORT_R	   / **/
-#define GETSERVBYPORT_R_PROTO 0	   /**/
-
-/* HAS_GETSERVENT_R:
- *	This symbol, if defined, indicates that the getservent_r routine
- *	is available to getservent re-entrantly.
- */
-/* GETSERVENT_R_PROTO:
- *	This symbol encodes the prototype of getservent_r.
- *	It is zero if d_getservent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
- *	is defined.
- */
-/*#define HAS_GETSERVENT_R	   / **/
-#define GETSERVENT_R_PROTO 0	   /**/
-
-/* HAS_GETSPNAM_R:
- *	This symbol, if defined, indicates that the getspnam_r routine
- *	is available to getspnam re-entrantly.
- */
-/* GETSPNAM_R_PROTO:
- *	This symbol encodes the prototype of getspnam_r.
- *	It is zero if d_getspnam_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
- *	is defined.
- */
-/*#define HAS_GETSPNAM_R	   / **/
-#define GETSPNAM_R_PROTO 0	   /**/
-
-/* HAS_GMTIME_R:
- *	This symbol, if defined, indicates that the gmtime_r routine
- *	is available to gmtime re-entrantly.
- */
-/* GMTIME_R_PROTO:
- *	This symbol encodes the prototype of gmtime_r.
- *	It is zero if d_gmtime_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
- *	is defined.
- */
-/*#define HAS_GMTIME_R	   / **/
-#define GMTIME_R_PROTO 0	   /**/
-
-/* HAS_GNULIBC:
- *	This symbol, if defined, indicates to the C program that
- *	the GNU C library is being used.  A better check is to use
- *	the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
- */
-/*#define HAS_GNULIBC  	/ **/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-#   define _GNU_SOURCE
-#endif
-
-/* HAS_ISASCII:
- *	This manifest constant lets the C program know that isascii
- *	is available.
- */
-#define HAS_ISASCII		/**/
-
-/* HAS_LCHOWN:
- *	This symbol, if defined, indicates that the lchown routine is
- *	available to operate on a symbolic link (instead of following the
- *	link).
- */
-/*#define HAS_LCHOWN		/ **/
-
-/* HAS_LOCALTIME_R:
- *	This symbol, if defined, indicates that the localtime_r routine
- *	is available to localtime re-entrantly.
- */
-/* LOCALTIME_R_NEEDS_TZSET:
- *	Many libc's localtime_r implementations do not call tzset,
- *	making them differ from localtime(), and making timezone
- *	changes using \undef{TZ} without explicitly calling tzset
- *	impossible. This symbol makes us call tzset before localtime_r
- */
-/*#define LOCALTIME_R_NEEDS_TZSET / **/
-#ifdef LOCALTIME_R_NEEDS_TZSET
-#define L_R_TZSET tzset(),
-#else
-#define L_R_TZSET
-#endif
-
-/* LOCALTIME_R_PROTO:
- *	This symbol encodes the prototype of localtime_r.
- *	It is zero if d_localtime_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
- *	is defined.
- */
-/*#define HAS_LOCALTIME_R	   / **/
-#define LOCALTIME_R_PROTO 0	   /**/
-
-/* HAS_OPEN3:
- *	This manifest constant lets the C program know that the three
- *	argument form of open(2) is available.
- */
-/*#define HAS_OPEN3		/ **/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- *	This symbol, if defined, indicates how to create pthread
- *	in joinable (aka undetached) state.  NOTE: not defined
- *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- *	(the new version of the constant).
- *	If defined, known values are PTHREAD_CREATE_UNDETACHED
- *	and __UNDETACHED.
- */
-/*#define OLD_PTHREAD_CREATE_JOINABLE  / **/
-
-/* HAS_PTHREAD_ATFORK:
- *	This symbol, if defined, indicates that the pthread_atfork routine
- *	is available to setup fork handlers.
- */
-/*#define HAS_PTHREAD_ATFORK		/ **/
-
-/* HAS_PTHREAD_YIELD:
- *	This symbol, if defined, indicates that the pthread_yield
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- *	This symbol defines the way to yield the execution of
- *	the current thread.  Known ways are sched_yield,
- *	pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- *	This symbol, if defined, indicates that the sched_yield
- *	routine is available to yield the execution of the current
- *	thread.	 sched_yield is preferable to pthread_yield.
- */
-/*#define HAS_PTHREAD_YIELD	/ **/
-#define SCHED_YIELD		/**/
-/*#define HAS_SCHED_YIELD	/ **/
-
-/* HAS_RANDOM_R:
- *	This symbol, if defined, indicates that the random_r routine
- *	is available to random re-entrantly.
- */
-/* RANDOM_R_PROTO:
- *	This symbol encodes the prototype of random_r.
- *	It is zero if d_random_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
- *	is defined.
- */
-/*#define HAS_RANDOM_R	   / **/
-#define RANDOM_R_PROTO 0	   /**/
-
-/* HAS_READDIR64_R:
- *	This symbol, if defined, indicates that the readdir64_r routine
- *	is available to readdir64 re-entrantly.
- */
-/* READDIR64_R_PROTO:
- *	This symbol encodes the prototype of readdir64_r.
- *	It is zero if d_readdir64_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
- *	is defined.
- */
-/*#define HAS_READDIR64_R	   / **/
-#define READDIR64_R_PROTO 0	   /**/
-
-/* HAS_READDIR_R:
- *	This symbol, if defined, indicates that the readdir_r routine
- *	is available to readdir re-entrantly.
- */
-/* READDIR_R_PROTO:
- *	This symbol encodes the prototype of readdir_r.
- *	It is zero if d_readdir_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
- *	is defined.
- */
-/*#define HAS_READDIR_R	   / **/
-#define READDIR_R_PROTO 0	   /**/
-
-/* HAS_SAFE_BCOPY:
- *	This symbol, if defined, indicates that the bcopy routine is available
- *	to copy potentially overlapping memory blocks. Normally, you should
- *	probably use memmove() or memcpy(). If neither is defined, roll your
- *	own version.
- */
-/*#define HAS_SAFE_BCOPY	/ **/
-
-/* HAS_SAFE_MEMCPY:
- *	This symbol, if defined, indicates that the memcpy routine is available
- *	to copy potentially overlapping memory blocks.  If you need to
- *	copy overlapping memory blocks, you should check HAS_MEMMOVE and
- *	use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY	/ **/
-
-/* HAS_SANE_MEMCMP:
- *	This symbol, if defined, indicates that the memcmp routine is available
- *	and can be used to compare relative magnitudes of chars with their high
- *	bits set.  If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP	/**/
-
-/* HAS_SETGRENT_R:
- *	This symbol, if defined, indicates that the setgrent_r routine
- *	is available to setgrent re-entrantly.
- */
-/* SETGRENT_R_PROTO:
- *	This symbol encodes the prototype of setgrent_r.
- *	It is zero if d_setgrent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
- *	is defined.
- */
-/*#define HAS_SETGRENT_R	   / **/
-#define SETGRENT_R_PROTO 0	   /**/
-
-/* HAS_SETHOSTENT_R:
- *	This symbol, if defined, indicates that the sethostent_r routine
- *	is available to sethostent re-entrantly.
- */
-/* SETHOSTENT_R_PROTO:
- *	This symbol encodes the prototype of sethostent_r.
- *	It is zero if d_sethostent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
- *	is defined.
- */
-/*#define HAS_SETHOSTENT_R	   / **/
-#define SETHOSTENT_R_PROTO 0	   /**/
-
-/* HAS_SETLOCALE_R:
- *	This symbol, if defined, indicates that the setlocale_r routine
- *	is available to setlocale re-entrantly.
- */
-/* SETLOCALE_R_PROTO:
- *	This symbol encodes the prototype of setlocale_r.
- *	It is zero if d_setlocale_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
- *	is defined.
- */
-/*#define HAS_SETLOCALE_R	   / **/
-#define SETLOCALE_R_PROTO 0	   /**/
-
-/* HAS_SETNETENT_R:
- *	This symbol, if defined, indicates that the setnetent_r routine
- *	is available to setnetent re-entrantly.
- */
-/* SETNETENT_R_PROTO:
- *	This symbol encodes the prototype of setnetent_r.
- *	It is zero if d_setnetent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
- *	is defined.
- */
-/*#define HAS_SETNETENT_R	   / **/
-#define SETNETENT_R_PROTO 0	   /**/
-
-/* HAS_SETPROTOENT_R:
- *	This symbol, if defined, indicates that the setprotoent_r routine
- *	is available to setprotoent re-entrantly.
- */
-/* SETPROTOENT_R_PROTO:
- *	This symbol encodes the prototype of setprotoent_r.
- *	It is zero if d_setprotoent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
- *	is defined.
- */
-/*#define HAS_SETPROTOENT_R	   / **/
-#define SETPROTOENT_R_PROTO 0	   /**/
-
-/* HAS_SETPWENT_R:
- *	This symbol, if defined, indicates that the setpwent_r routine
- *	is available to setpwent re-entrantly.
- */
-/* SETPWENT_R_PROTO:
- *	This symbol encodes the prototype of setpwent_r.
- *	It is zero if d_setpwent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
- *	is defined.
- */
-/*#define HAS_SETPWENT_R	   / **/
-#define SETPWENT_R_PROTO 0	   /**/
-
-/* HAS_SETSERVENT_R:
- *	This symbol, if defined, indicates that the setservent_r routine
- *	is available to setservent re-entrantly.
- */
-/* SETSERVENT_R_PROTO:
- *	This symbol encodes the prototype of setservent_r.
- *	It is zero if d_setservent_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
- *	is defined.
- */
-/*#define HAS_SETSERVENT_R	   / **/
-#define SETSERVENT_R_PROTO 0	   /**/
-
-/* HAS_SIGACTION:
- *	This symbol, if defined, indicates that Vr4's sigaction() routine
- *	is available.
- */
-/*#define HAS_SIGACTION	/ **/
-
-/* HAS_SIGSETJMP:
- *	This variable indicates to the C program that the sigsetjmp()
- *	routine is available to save the calling process's registers
- *	and stack environment for later use by siglongjmp(), and
- *	to optionally save the process's signal mask.  See
- *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- *	This macro is used in the same way as sigsetjmp(), but will invoke
- *	traditional setjmp() if sigsetjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- *	This macro is used in the same way as siglongjmp(), but will invoke
- *	traditional longjmp() if siglongjmp isn't available.
- *	See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP	/ **/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* HAS_SRAND48_R:
- *	This symbol, if defined, indicates that the srand48_r routine
- *	is available to srand48 re-entrantly.
- */
-/* SRAND48_R_PROTO:
- *	This symbol encodes the prototype of srand48_r.
- *	It is zero if d_srand48_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
- *	is defined.
- */
-/*#define HAS_SRAND48_R	   / **/
-#define SRAND48_R_PROTO 0	   /**/
-
-/* HAS_SRANDOM_R:
- *	This symbol, if defined, indicates that the srandom_r routine
- *	is available to srandom re-entrantly.
- */
-/* SRANDOM_R_PROTO:
- *	This symbol encodes the prototype of srandom_r.
- *	It is zero if d_srandom_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
- *	is defined.
- */
-/*#define HAS_SRANDOM_R	   / **/
-#define SRANDOM_R_PROTO 0	   /**/
-
-/* USE_STDIO_PTR:
- *	This symbol is defined if the _ptr and _cnt fields (or similar)
- *	of the stdio FILE structure can be used to access the stdio buffer
- *	for a file handle.  If this is defined, then the FILE_ptr(fp)
- *	and FILE_cnt(fp) macros will also be defined and should be used
- *	to access these fields.
- */
-/* FILE_ptr:
- *	This macro is used to access the _ptr field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- *	This symbol is defined if the FILE_ptr macro can be used as an
- *	lvalue.
- */
-/* FILE_cnt:
- *	This macro is used to access the _cnt field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- *	This symbol is defined if the FILE_cnt macro can be used as an
- *	lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- *	This symbol is defined if using the FILE_ptr macro as an lvalue
- *	to increase the pointer by n has the side effect of decreasing the
- *	value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- *	This symbol is defined if using the FILE_ptr macro as an lvalue
- *	to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-#define USE_STDIO_PTR 	/**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp)	((fp)->_ptr)
-#define STDIO_PTR_LVALUE 		/**/
-#define FILE_cnt(fp)	((fp)->_cnt)
-#define STDIO_CNT_LVALUE 		/**/
-/*#define STDIO_PTR_LVAL_SETS_CNT	/ **/
-#define STDIO_PTR_LVAL_NOCHANGE_CNT	/**/
-#endif
-
-/* USE_STDIO_BASE:
- *	This symbol is defined if the _base field (or similar) of the
- *	stdio FILE structure can be used to access the stdio buffer for
- *	a file handle.  If this is defined, then the FILE_base(fp) macro
- *	will also be defined and should be used to access this field.
- *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
- *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
- *	will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- *	This macro is used to access the _base field (or equivalent) of the
- *	FILE structure pointed to by its argument. This macro will always be
- *	defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- *	This macro is used to determine the number of bytes in the I/O
- *	buffer pointed to by _base field (or equivalent) of the FILE
- *	structure pointed to its argument. This macro will always be defined
- *	if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE 	/**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp)	((fp)->_base)
-#define FILE_bufsiz(fp)	((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* HAS_STRERROR_R:
- *	This symbol, if defined, indicates that the strerror_r routine
- *	is available to strerror re-entrantly.
- */
-/* STRERROR_R_PROTO:
- *	This symbol encodes the prototype of strerror_r.
- *	It is zero if d_strerror_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
- *	is defined.
- */
-/*#define HAS_STRERROR_R	   / **/
-#define STRERROR_R_PROTO 0	   /**/
-
-/* HAS_TMPNAM_R:
- *	This symbol, if defined, indicates that the tmpnam_r routine
- *	is available to tmpnam re-entrantly.
- */
-/* TMPNAM_R_PROTO:
- *	This symbol encodes the prototype of tmpnam_r.
- *	It is zero if d_tmpnam_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
- *	is defined.
- */
-/*#define HAS_TMPNAM_R	   / **/
-#define TMPNAM_R_PROTO 0	   /**/
-
-/* HAS_TTYNAME_R:
- *	This symbol, if defined, indicates that the ttyname_r routine
- *	is available to ttyname re-entrantly.
- */
-/* TTYNAME_R_PROTO:
- *	This symbol encodes the prototype of ttyname_r.
- *	It is zero if d_ttyname_r is undef, and one of the
- *	REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
- *	is defined.
- */
-/*#define HAS_TTYNAME_R	   / **/
-#define TTYNAME_R_PROTO 0	   /**/
-
-/* HAS_VPRINTF:
- *	This symbol, if defined, indicates that the vprintf routine is available
- *	to printf with a pointer to an argument list.  If unavailable, you
- *	may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- *	This symbol is defined if this system has vsprintf() returning type
- *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
- *	is up to the package author to declare vsprintf correctly based on the
- *	symbol.
- */
-#define HAS_VPRINTF	/**/
-/*#define USE_CHAR_VSPRINTF 	/ **/
-
-/* DOUBLESIZE:
- *	This symbol contains the size of a double, so that the C preprocessor
- *	can make decisions based on it.
- */
-#define DOUBLESIZE 8		/**/
-
-/* I_MACH_CTHREADS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <mach/cthreads.h>.
- */
-/*#define   I_MACH_CTHREADS	/ **/
-
-/* I_PTHREAD:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <pthread.h>.
- */
-/*#define   I_PTHREAD	/ **/
-
-/* I_SYS_ACCESS:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <sys/access.h>.
- */
-/*#define   I_SYS_ACCESS                / **/
-
-/* I_SYS_SECURITY:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <sys/security.h>.
- */
-/*#define   I_SYS_SECURITY	/ **/
-
-/* I_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <time.h>.
- */
-/* I_SYS_TIME:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- *	This symbol, if defined, indicates to the C program that
- *	the struct tm has a tm_zone field.
- */
-/* HAS_TM_TM_GMTOFF:
- *	This symbol, if defined, indicates to the C program that
- *	the struct tm has a tm_gmtoff field.
- */
-#define I_TIME		/**/
-/*#define I_SYS_TIME		/ **/
-/*#define I_SYS_TIME_KERNEL		/ **/
-/*#define HAS_TM_TM_ZONE		/ **/
-/*#define HAS_TM_TM_GMTOFF		/ **/
-
-/* PERL_INC_VERSION_LIST:
- *	This variable specifies the list of subdirectories in over
- *	which perl.c:incpush() and lib/lib.pm will automatically
- *	search when adding directories to @INC, in a format suitable
- *	for a C initialization string.  See the inc_version_list entry
- *	in Porting/Glossary for more details.
- */
-/*#define PERL_INC_VERSION_LIST 0		/ **/
-
-/* INSTALL_USR_BIN_PERL:
- *	This symbol, if defined, indicates that Perl is to be installed
- * 	also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL	/ **/
-
-/* VAL_O_NONBLOCK:
- *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- *	non-blocking I/O for the file descriptor. Note that there is no way
- *	back, i.e. you cannot turn it blocking again this way. If you wish to
- *	alternatively switch between blocking and non-blocking, use the
- *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- *	This symbol holds the errno error code set by read() when no data was
- *	present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- *	This symbol holds the return code from read() when no data is present
- *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- *	not defined, then you can't distinguish between no data and EOF by
- *	issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- *	This symbol, if defined, indicates to the C program that a read() on
- *	a non-blocking file descriptor will return 0 on EOF, and not the value
- *	held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
-
-/* PERL_OTHERLIBDIRS:
- *	This variable contains a colon-separated set of paths for the perl
- *	binary to search for additional library files or modules.
- *	These directories will be tacked to the end of @INC.
- *	Perl will automatically search below each path for version-
- *	and architecture-specific directories.  See PERL_INC_VERSION_LIST
- *	for more details.
- */
-/*#define PERL_OTHERLIBDIRS ""		/ **/
-
-/* PRIVLIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- *	This symbol contains the ~name expanded version of PRIVLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "c:\\perl\\lib"		/**/
-#define PRIVLIB_EXP (win32_get_privlib(PERL_VERSION_STRING, NULL))	/**/
-
-/* PTRSIZE:
- *	This symbol contains the size of a pointer, so that the C preprocessor
- *	can make decisions based on it.  It will be sizeof(void *) if
- *	the compiler supports (void *); otherwise it will be
- *	sizeof(char *).
- */
-#define PTRSIZE 8		/**/
-
-/* Drand01:
- *	This macro is to be used to generate uniformly distributed
- *	random numbers over the range [0., 1.[.  You may have to supply
- *	an 'extern double drand48();' in your program since SunOS 4.1.3
- *	doesn't provide you with anything relevant in its headers.
- *	See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- *	This symbol defines the type of the argument of the
- *	random seed function.
- */
-/* seedDrand01:
- *	This symbol defines the macro to be used in seeding the
- *	random number generator (see Drand01).
- */
-/* RANDBITS:
- *	This symbol indicates how many bits are produced by the
- *	function used to generate normalized random numbers.
- *	Values include 15, 16, 31, and 48.
- */
-#define Drand01()		(rand()/(double)((unsigned)1<<RANDBITS))		/**/
-#define Rand_seed_t		unsigned		/**/
-#define seedDrand01(x)	srand((Rand_seed_t)x)	/**/
-#define RANDBITS		15		/**/
-
-/* SITEARCH:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-dependent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITEARCH_EXP:
- *	This symbol contains the ~name expanded version of SITEARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITEARCH "c:\\perl\\site\\lib"		/**/
-/*#define SITEARCH_EXP ""	/ **/
-
-/* SITELIB:
- *	This symbol contains the name of the private library for this package.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.  The program
- *	should be prepared to do ~ expansion.
- *	The standard distribution will put nothing in this directory.
- *	After perl has been installed, users may install their own local
- *	architecture-independent modules in this directory with
- *		MakeMaker Makefile.PL
- *	or equivalent.  See INSTALL for details.
- */
-/* SITELIB_EXP:
- *	This symbol contains the ~name expanded version of SITELIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* SITELIB_STEM:
- *	This define is SITELIB_EXP with any trailing version-specific component
- *	removed.  The elements in inc_version_list (inc_version_list.U) can
- *	be tacked onto this variable to generate a list of directories to search.
- */
-#define SITELIB "c:\\perl\\site\\lib"		/**/
-#define SITELIB_EXP (win32_get_sitelib(PERL_VERSION_STRING, NULL))	/**/
-#define SITELIB_STEM ""		/**/
-
-/* SSize_t:
- *	This symbol holds the type used by functions that return
- *	a count of bytes or an error condition.  It must be a signed type.
- *	It is usually ssize_t, but may be long or int, etc.
- *	It may be necessary to include <sys/types.h> or <unistd.h>
- *	to get any typedef'ed information.
- *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t long long	 /* signed count of bytes */
-
-/* USE_ITHREADS:
- *	This symbol, if defined, indicates that Perl should be built to
- *	use the interpreter-based threading implementation.
- */
-/* USE_5005THREADS:
- *	This symbol, if defined, indicates that Perl should be built to
- *	use the 5.005-based threading implementation.
- *	Only valid up to 5.8.x.
- */
-/* OLD_PTHREADS_API:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use the old draft POSIX threads API.
- */
-/* USE_REENTRANT_API:
- *	This symbol, if defined, indicates that Perl should
- *	try to use the various _r versions of library functions.
- *	This is extremely experimental.
- */
-/*#define	USE_5005THREADS		/ **/
-/*#define	USE_ITHREADS		/ **/
-#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define		USE_THREADS		/* until src is revised*/
-#endif
-/*#define	OLD_PTHREADS_API		/ **/
-/*#define	USE_REENTRANT_API	/ **/
-
-/* PERL_VENDORARCH:
- *	If defined, this symbol contains the name of a private library.
- *	The library is private in the sense that it needn't be in anyone's
- *	execution path, but it should be accessible by the world.
- *	It may have a ~ on the front.
- *	The standard distribution will put nothing in this directory.
- *	Vendors who distribute perl may wish to place their own
- *	architecture-dependent modules and extensions in this directory with
- *		MakeMaker Makefile.PL INSTALLDIRS=vendor
- *	or equivalent.  See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- *	This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define PERL_VENDORARCH ""		/ **/
-/*#define PERL_VENDORARCH_EXP ""		/ **/
-
-/* PERL_VENDORLIB_EXP:
- *	This symbol contains the ~name expanded version of VENDORLIB, to be used
- *	in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- *	This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- *	removed.  The elements in inc_version_list (inc_version_list.U) can
- *	be tacked onto this variable to generate a list of directories to search.
- */
-/*#define PERL_VENDORLIB_EXP ""		/ **/
-/*#define PERL_VENDORLIB_STEM ""		/ **/
-
-/* HAS_STATIC_INLINE:
- *	This symbol, if defined, indicates that the C compiler supports
- *	C99-style static inline.  That is, the function can't be called
- *	from another translation unit.
- */
-/* PERL_STATIC_INLINE:
- *	This symbol gives the best-guess incantation to use for static
- *	inline functions.  If HAS_STATIC_INLINE is defined, this will
- *	give C99-style inline.  If HAS_STATIC_INLINE is not defined,
- *	this will give a plain 'static'.  It will always be defined
- *	to something that gives static linkage.
- *	Possibilities include
- *		static inline       (c99)
- *		static __inline__   (gcc -ansi)
- *		static __inline     (MSVC)
- *		static _inline      (older MSVC)
- *		static              (c89 compilers)
- */
-#define HAS_STATIC_INLINE				/**/
-#define PERL_STATIC_INLINE static __inline__	/**/
-
-/* EBCDIC:
- *     This symbol, if defined, indicates that this system uses
- *	EBCDIC encoding.
- */
-/*#define	EBCDIC 		/ **/
-
-/* OSNAME:
- *	This symbol contains the name of the operating system, as determined
- *	by Configure.  You shouldn't rely on it too much; the specific
- *	feature tests from Configure are generally more reliable.
- */
-/* OSVERS:
- *	This symbol contains the version of the operating system, as determined
- *	by Configure.  You shouldn't rely on it too much; the specific
- *	feature tests from Configure are generally more reliable.
- */
-#define OSNAME "MSWin32"		/**/
-#define OSVERS "5.1"		/**/
-
-/* CAT2:
- *	This macro concatenates 2 tokens together.
- */
-/* STRINGIFY:
- *	This macro surrounds its token with double quotes.
- */
-#if 42 == 1
-#define CAT2(a,b)	a/**/b
-#undef STRINGIFY
-#define STRINGIFY(a)	"a"
-#endif
-#if 42 == 42
-#define PeRl_CaTiFy(a, b)	a ## b
-#define PeRl_StGiFy(a)	#a
-#define CAT2(a,b)	PeRl_CaTiFy(a,b)
-#define StGiFy(a)	PeRl_StGiFy(a)
-#undef STRINGIFY
-#define STRINGIFY(a)	PeRl_StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-#include "Bletch: How does this C preprocessor concatenate tokens?"
-#endif
-
-/* CPPSTDIN:
- *	This symbol contains the first part of the string which will invoke
- *	the C preprocessor on the standard input and produce to standard
- *	output.	 Typical value of "cc -E" or "/lib/cpp", but it can also
- *	call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- *	This symbol contains the second part of the string which will invoke
- *	the C preprocessor on the standard input and produce to standard
- *	output.  This symbol will have the value "-" if CPPSTDIN needs a minus
- *	to specify standard input, otherwise the value is "".
- */
-/* CPPRUN:
- *	This symbol contains the string which will invoke a C preprocessor on
- *	the standard input and produce to standard output. It needs to end
- *	with CPPLAST, after all other preprocessor flags have been specified.
- *	The main difference with CPPSTDIN is that this program will never be a
- *	pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- *	available directly to the user. Note that it may well be different from
- *	the preprocessor used to compile the C program.
- */
-/* CPPLAST:
- *	This symbol is intended to be used along with CPPRUN in the same manner
- *	symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
- */
-#define CPPSTDIN "gcc -E"
-#define CPPMINUS "-"
-#define CPPRUN "gcc -E"
-#define CPPLAST ""
-
-/* HAS_ACCESS:
- *	This manifest constant lets the C program know that the access()
- *	system call is available to check for accessibility using real UID/GID.
- *	(always present on UNIX.)
- */
-#define HAS_ACCESS		/**/
-
-/* The HASATTRIBUTE_* defines are left undefined here because they vary from
- * one version of GCC to another.  Instead, they are defined on the basis of
- * the compiler version in <perl.h>.
- */
-/* HASATTRIBUTE_FORMAT:
- *	Can we handle GCC attribute for checking printf-style formats
- */
-/* PRINTF_FORMAT_NULL_OK:
- *	Allows __printf__ format to be null when checking printf-style
- */
-/* HASATTRIBUTE_MALLOC:
- *	Can we handle GCC attribute for malloc-style functions.
- */
-/* HASATTRIBUTE_NONNULL:
- *	Can we handle GCC attribute for nonnull function parms.
- */
-/* HASATTRIBUTE_NORETURN:
- *	Can we handle GCC attribute for functions that do not return
- */
-/* HASATTRIBUTE_PURE:
- *	Can we handle GCC attribute for pure functions
- */
-/* HASATTRIBUTE_UNUSED:
- *	Can we handle GCC attribute for unused variables and arguments
- */
-/* HASATTRIBUTE_DEPRECATED:
- *	Can we handle GCC attribute for marking deprecated APIs
- */
-/* HASATTRIBUTE_WARN_UNUSED_RESULT:
- *	Can we handle GCC attribute for warning on unused results
- */
-/*#define HASATTRIBUTE_DEPRECATED	/ **/
-/*#define HASATTRIBUTE_FORMAT	/ **/
-/*#define PRINTF_FORMAT_NULL_OK	/ **/
-/*#define HASATTRIBUTE_NORETURN	/ **/
-/*#define HASATTRIBUTE_MALLOC	/ **/
-/*#define HASATTRIBUTE_NONNULL	/ **/
-/*#define HASATTRIBUTE_PURE	/ **/
-/*#define HASATTRIBUTE_UNUSED	/ **/
-/*#define HASATTRIBUTE_WARN_UNUSED_RESULT	/ **/
-
-/* HASCONST:
- *	This symbol, if defined, indicates that this C compiler knows about
- *	the const type. There is no need to actually test for that symbol
- *	within your programs. The mere use of the "const" keyword will
- *	trigger the necessary tests.
- */
-#define HASCONST	/**/
-#ifndef HASCONST
-#define const
-#endif
-
-/* HAS_CSH:
- *	This symbol, if defined, indicates that the C-shell exists.
- */
-/* CSH:
- *	This symbol, if defined, contains the full pathname of csh.
- */
-/*#define HAS_CSH		/ **/
-#ifdef HAS_CSH
-#define CSH ""	/**/
-#endif
-
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- *	This symbol, if defined, indicates that the bug that prevents
- *	setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- *	This symbol, if defined, indicates that the C program should
- *	check the script that it is executing for setuid/setgid bits, and
- *	attempt to emulate setuid/setgid on systems that have disabled
- *	setuid #! scripts because the kernel can't do it securely.
- *	It is up to the package designer to make sure that this emulation
- *	is done securely.  Among other things, it should do an fstat on
- *	the script it just opened to make sure it really is a setuid/setgid
- *	script, it should make sure the arguments passed correspond exactly
- *	to the argument on the #! line, and it should not trust any
- *	subprocesses to which it must pass the filename rather than the
- *	file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW	/ **/
-/*#define DOSUID		/ **/
-
-/* HAS_ENDGRENT:
- *	This symbol, if defined, indicates that the getgrent routine is
- *	available for finalizing sequential access of the group database.
- */
-/*#define HAS_ENDGRENT		/ **/
-
-/* HAS_ENDHOSTENT:
- *	This symbol, if defined, indicates that the endhostent() routine is
- *	available to close whatever was being used for host queries.
- */
-/*#define HAS_ENDHOSTENT		/ **/
-
-/* HAS_ENDNETENT:
- *	This symbol, if defined, indicates that the endnetent() routine is
- *	available to close whatever was being used for network queries.
- */
-/*#define HAS_ENDNETENT		/ **/
-
-/* HAS_ENDPROTOENT:
- *	This symbol, if defined, indicates that the endprotoent() routine is
- *	available to close whatever was being used for protocol queries.
- */
-/*#define HAS_ENDPROTOENT		/ **/
-
-/* HAS_ENDPWENT:
- *	This symbol, if defined, indicates that the getgrent routine is
- *	available for finalizing sequential access of the passwd database.
- */
-/*#define HAS_ENDPWENT		/ **/
-
-/* HAS_ENDSERVENT:
- *	This symbol, if defined, indicates that the endservent() routine is
- *	available to close whatever was being used for service queries.
- */
-/*#define HAS_ENDSERVENT		/ **/
-
-/* FLEXFILENAMES:
- *	This symbol, if defined, indicates that the system supports filenames
- *	longer than 14 characters.
- */
-#define	FLEXFILENAMES		/**/
-
-/* HAS_GETGRENT:
- *	This symbol, if defined, indicates that the getgrent routine is
- *	available for sequential access of the group database.
- */
-/*#define HAS_GETGRENT		/ **/
-
-/* HAS_GETHOSTBYADDR:
- *	This symbol, if defined, indicates that the gethostbyaddr() routine is
- *	available to look up hosts by their IP addresses.
- */
-#define HAS_GETHOSTBYADDR		/**/
-
-/* HAS_GETHOSTBYNAME:
- *	This symbol, if defined, indicates that the gethostbyname() routine is
- *	available to look up host names in some data base or other.
- */
-#define HAS_GETHOSTBYNAME		/**/
-
-/* HAS_GETHOSTENT:
- *	This symbol, if defined, indicates that the gethostent() routine is
- *	available to look up host names in some data base or another.
- */
-/*#define HAS_GETHOSTENT		/ **/
-
-/* HAS_GETHOSTNAME:
- *	This symbol, if defined, indicates that the C program may use the
- *	gethostname() routine to derive the host name.  See also HAS_UNAME
- *	and PHOSTNAME.
- */
-/* HAS_UNAME:
- *	This symbol, if defined, indicates that the C program may use the
- *	uname() routine to derive the host name.  See also HAS_GETHOSTNAME
- *	and PHOSTNAME.
- */
-/* PHOSTNAME:
- *	This symbol, if defined, indicates the command to feed to the
- *	popen() routine to derive the host name.  See also HAS_GETHOSTNAME
- *	and HAS_UNAME.	Note that the command uses a fully qualified path,
- *	so that it is safe even if used by a process with super-user
- *	privileges.
- */
-/* HAS_PHOSTNAME:
- *	This symbol, if defined, indicates that the C program may use the
- *	contents of PHOSTNAME as a command to feed to the popen() routine
- *	to derive the host name.
- */
-#define HAS_GETHOSTNAME	/**/
-#define HAS_UNAME		/**/
-/*#define HAS_PHOSTNAME	/ **/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME ""	/* How to get the host name */
-#endif
-
-/* HAS_GETNETBYADDR:
- *	This symbol, if defined, indicates that the getnetbyaddr() routine is
- *	available to look up networks by their IP addresses.
- */
-/*#define HAS_GETNETBYADDR		/ **/
-
-/* HAS_GETNETBYNAME:
- *	This symbol, if defined, indicates that the getnetbyname() routine is
- *	available to look up networks by their names.
- */
-/*#define HAS_GETNETBYNAME		/ **/
-
-/* HAS_GETNETENT:
- *	This symbol, if defined, indicates that the getnetent() routine is
- *	available to look up network names in some data base or another.
- */
-/*#define HAS_GETNETENT		/ **/
-
-/* HAS_GETPROTOENT:
- *	This symbol, if defined, indicates that the getprotoent() routine is
- *	available to look up protocols in some data base or another.
- */
-/*#define HAS_GETPROTOENT		/ **/
-
-/* HAS_GETPGRP:
- *	This symbol, if defined, indicates that the getpgrp routine is
- *	available to get the current process group.
- */
-/* USE_BSD_GETPGRP:
- *	This symbol, if defined, indicates that getpgrp needs one
- *	arguments whereas USG one needs none.
- */
-/*#define HAS_GETPGRP		/ **/
-/*#define USE_BSD_GETPGRP	/ **/
-
-/* HAS_GETPROTOBYNAME:
- *	This symbol, if defined, indicates that the getprotobyname()
- *	routine is available to look up protocols by their name.
- */
-/* HAS_GETPROTOBYNUMBER:
- *	This symbol, if defined, indicates that the getprotobynumber()
- *	routine is available to look up protocols by their number.
- */
-#define HAS_GETPROTOBYNAME		/**/
-#define HAS_GETPROTOBYNUMBER		/**/
-
-/* HAS_GETPWENT:
- *	This symbol, if defined, indicates that the getpwent routine is
- *	available for sequential access of the passwd database.
- *	If this is not available, the older getpw() function may be available.
- */
-/*#define HAS_GETPWENT		/ **/
-
-/* HAS_GETSERVENT:
- *	This symbol, if defined, indicates that the getservent() routine is
- *	available to look up network services in some data base or another.
- */
-/*#define HAS_GETSERVENT		/ **/
-
-/* HAS_GETSERVBYNAME:
- *	This symbol, if defined, indicates that the getservbyname()
- *	routine is available to look up services by their name.
- */
-/* HAS_GETSERVBYPORT:
- *	This symbol, if defined, indicates that the getservbyport()
- *	routine is available to look up services by their port.
- */
-#define HAS_GETSERVBYNAME		/**/
-#define HAS_GETSERVBYPORT		/**/
-
-/* HAS_HTONL:
- *	This symbol, if defined, indicates that the htonl() routine (and
- *	friends htons() ntohl() ntohs()) are available to do network
- *	order byte swapping.
- */
-/* HAS_HTONS:
- *	This symbol, if defined, indicates that the htons() routine (and
- *	friends htonl() ntohl() ntohs()) are available to do network
- *	order byte swapping.
- */
-/* HAS_NTOHL:
- *	This symbol, if defined, indicates that the ntohl() routine (and
- *	friends htonl() htons() ntohs()) are available to do network
- *	order byte swapping.
- */
-/* HAS_NTOHS:
- *	This symbol, if defined, indicates that the ntohs() routine (and
- *	friends htonl() htons() ntohl()) are available to do network
- *	order byte swapping.
- */
-#define HAS_HTONL		/**/
-#define HAS_HTONS		/**/
-#define HAS_NTOHL		/**/
-#define HAS_NTOHS		/**/
-
-/* HAS_LONG_DOUBLE:
- *	This symbol will be defined if the C compiler supports long
- *	doubles.
- */
-/* LONG_DOUBLESIZE:
- *	This symbol contains the size of a long double, so that the
- *	C preprocessor can make decisions based on it.  It is only
- *	defined if the system supports long doubles.
- */
-#define HAS_LONG_DOUBLE		/**/
-#ifdef HAS_LONG_DOUBLE
-#   define LONG_DOUBLESIZE 12		/**/
-#endif
-
-/* HAS_LONG_LONG:
- *	This symbol will be defined if the C compiler supports long long.
- */
-/* LONGLONGSIZE:
- *	This symbol contains the size of a long long, so that the
- *	C preprocessor can make decisions based on it.  It is only
- *	defined if the system supports long long.
- */
-#define HAS_LONG_LONG		/**/
-#ifdef HAS_LONG_LONG
-#define LONGLONGSIZE 8		/**/
-#endif
-
-/* HAS_MEMCHR:
- *	This symbol, if defined, indicates that the memchr routine is available
- *	to locate characters within a C string.
- */
-#define HAS_MEMCHR	/**/
-
-/* HAS_MKSTEMP:
- *	This symbol, if defined, indicates that the mkstemp routine is
- *	available to exclusively create and open a uniquely named
- *	temporary file.
- */
-/*#define HAS_MKSTEMP		/ **/
-
-/* HAS_MMAP:
- *	This symbol, if defined, indicates that the mmap system call is
- *	available to map a file into memory.
- */
-/* Mmap_t:
- *	This symbol holds the return type of the mmap() system call
- *	(and simultaneously the type of the first argument).
- *	Usually set to 'void *' or 'caddr_t'.
- */
-/*#define HAS_MMAP		/ **/
-#define Mmap_t void *	/**/
-
-/* HAS_MSG:
- *	This symbol, if defined, indicates that the entire msg*(2) library is
- *	supported (IPC mechanism based on message queues).
- */
-/*#define HAS_MSG		/ **/
-
-/* HAS_SEM:
- *	This symbol, if defined, indicates that the entire sem*(2) library is
- *	supported.
- */
-/*#define HAS_SEM		/ **/
-
-/* HAS_SETGRENT:
- *	This symbol, if defined, indicates that the setgrent routine is
- *	available for initializing sequential access of the group database.
- */
-/*#define HAS_SETGRENT		/ **/
-
-/* HAS_SETHOSTENT:
- *	This symbol, if defined, indicates that the sethostent() routine is
- *	available.
- */
-/*#define HAS_SETHOSTENT		/ **/
-
-/* HAS_SETNETENT:
- *	This symbol, if defined, indicates that the setnetent() routine is
- *	available.
- */
-/*#define HAS_SETNETENT		/ **/
-
-/* HAS_SETPROTOENT:
- *	This symbol, if defined, indicates that the setprotoent() routine is
- *	available.
- */
-/*#define HAS_SETPROTOENT		/ **/
-
-/* HAS_SETPGRP:
- *	This symbol, if defined, indicates that the setpgrp routine is
- *	available to set the current process group.
- */
-/* USE_BSD_SETPGRP:
- *	This symbol, if defined, indicates that setpgrp needs two
- *	arguments whereas USG one needs none.  See also HAS_SETPGID
- *	for a POSIX interface.
- */
-/*#define HAS_SETPGRP		/ **/
-/*#define USE_BSD_SETPGRP	/ **/
-
-/* HAS_SETPWENT:
- *	This symbol, if defined, indicates that the setpwent routine is
- *	available for initializing sequential access of the passwd database.
- */
-/*#define HAS_SETPWENT		/ **/
-
-/* HAS_SETSERVENT:
- *	This symbol, if defined, indicates that the setservent() routine is
- *	available.
- */
-/*#define HAS_SETSERVENT		/ **/
-
-/* HAS_SETVBUF:
- *	This symbol, if defined, indicates that the setvbuf routine is
- *	available to change buffering on an open stdio stream.
- *	to a line-buffered mode.
- */
-#define HAS_SETVBUF		/**/
-
-/* HAS_SHM:
- *	This symbol, if defined, indicates that the entire shm*(2) library is
- *	supported.
- */
-/*#define HAS_SHM		/ **/
-
-/* Shmat_t:
- *	This symbol holds the return type of the shmat() system call.
- *	Usually set to 'void *' or 'char *'.
- */
-/* HAS_SHMAT_PROTOTYPE:
- *	This symbol, if defined, indicates that the sys/shm.h includes
- *	a prototype for shmat().  Otherwise, it is up to the program to
- *	guess one.  Shmat_t shmat(int, Shmat_t, int) is a good guess,
- *	but not always right so it should be emitted by the program only
- *	when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
- */
-#define Shmat_t void *	/**/
-/*#define HAS_SHMAT_PROTOTYPE	/ **/
-
-/* HAS_SOCKET:
- *	This symbol, if defined, indicates that the BSD socket interface is
- *	supported.
- */
-/* HAS_SOCKETPAIR:
- *	This symbol, if defined, indicates that the BSD socketpair() call is
- *	supported.
- */
-/* HAS_MSG_CTRUNC:
- *	This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- *	Checking just with #ifdef might not be enough because this symbol
- *	has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- *	This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- *	Checking just with #ifdef might not be enough because this symbol
- *	has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- *	This symbol, if defined, indicates that the MSG_OOB is supported.
- *	Checking just with #ifdef might not be enough because this symbol
- *	has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- *	This symbol, if defined, indicates that the MSG_PEEK is supported.
- *	Checking just with #ifdef might not be enough because this symbol
- *	has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- *	This symbol, if defined, indicates that the MSG_PROXY is supported.
- *	Checking just with #ifdef might not be enough because this symbol
- *	has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- *	This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- *	Checking just with #ifdef might not be enough because this symbol
- *	has been known to be an enum.
- */
-/* HAS_SOCKADDR_SA_LEN:
- *	This symbol, if defined, indicates that the struct sockaddr
- *	structure has a member called sa_len, indicating the length of
- *	the structure.
- */
-/* HAS_SIN6_SCOPE_ID:
- *	This symbol, if defined, indicates that the struct sockaddr_in6
- *	structure has a member called sin6_scope_id.
- */
-#define	HAS_SOCKET		/**/
-/*#define	HAS_SOCKETPAIR	/ **/
-/*#define	HAS_SOCKADDR_SA_LEN	/ **/
-/*#define	HAS_MSG_CTRUNC	/ **/
-/*#define	HAS_MSG_DONTROUTE	/ **/
-/*#define	HAS_MSG_OOB	/ **/
-/*#define	HAS_MSG_PEEK	/ **/
-/*#define	HAS_MSG_PROXY	/ **/
-/*#define	HAS_SCM_RIGHTS	/ **/
-#define	HAS_SIN6_SCOPE_ID	/**/
-
-/* USE_STAT_BLOCKS:
- *	This symbol is defined if this system has a stat structure declaring
- *	st_blksize and st_blocks.
- */
-#ifndef USE_STAT_BLOCKS
-/*#define USE_STAT_BLOCKS 	/ **/
-#endif
-
-/* USE_STRUCT_COPY:
- *	This symbol, if defined, indicates that this C compiler knows how
- *	to copy structures.  If undefined, you'll need to use a block copy
- *	routine of some sort instead.
- */
-#define	USE_STRUCT_COPY	/**/
-
-/* HAS_STRERROR:
- *	This symbol, if defined, indicates that the strerror routine is
- *	available to translate error numbers to strings. See the writeup
- *	of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- *	This symbol, if defined, indicates that the sys_errlist array is
- *	available to translate error numbers to strings. The extern int
- *	sys_nerr gives the size of that table.
- */
-/* Strerror:
- *	This preprocessor symbol is defined as a macro if strerror() is
- *	not available to translate error numbers to strings but sys_errlist[]
- *	array is there.
- */
-#define HAS_STRERROR		/**/
-#define HAS_SYS_ERRLIST	/**/
-#define Strerror(e) strerror(e)
-
-/* HAS_STRTOUL:
- *	This symbol, if defined, indicates that the strtoul routine is
- *	available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL	/**/
-
-/* HAS_UNION_SEMUN:
- *	This symbol, if defined, indicates that the union semun is
- *	defined by including <sys/sem.h>.  If not, the user code
- *	probably needs to define it as:
- *	union semun {
- *	    int val;
- *	    struct semid_ds *buf;
- *	    unsigned short *array;
- *	}
- */
-/* USE_SEMCTL_SEMUN:
- *	This symbol, if defined, indicates that union semun is
- *	used for semctl IPC_STAT.
- */
-/* USE_SEMCTL_SEMID_DS:
- *	This symbol, if defined, indicates that struct semid_ds * is
- *	used for semctl IPC_STAT.
- */
-#define HAS_UNION_SEMUN	/**/
-/*#define USE_SEMCTL_SEMUN	/ **/
-/*#define USE_SEMCTL_SEMID_DS	/ **/
-
-/* HAS_VFORK:
- *	This symbol, if defined, indicates that vfork() exists.
- */
-/*#define HAS_VFORK	/ **/
-
-/* HAS_PSEUDOFORK:
- *	This symbol, if defined, indicates that an emulation of the
- *	fork routine is available.
- */
-/*#define HAS_PSEUDOFORK	/ **/
-
-/* Signal_t:
- *	This symbol's value is either "void" or "int", corresponding to the
- *	appropriate return type of a signal handler.  Thus, you can declare
- *	a signal handler using "Signal_t (*handler)()", and define the
- *	handler using "Signal_t handler(sig)".
- */
-#define Signal_t void	/* Signal handler's return type */
-
-/* HASVOLATILE:
- *	This symbol, if defined, indicates that this C compiler knows about
- *	the volatile declaration.
- */
-#define	HASVOLATILE	/**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
-/* I_DIRENT:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <dirent.h>. Using this symbol also triggers the definition
- *	of the Direntry_t define which ends up being 'struct dirent' or
- *	'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- *	This symbol, if defined, indicates to the C program that the length
- *	of directory entry names is provided by a d_namlen field.  Otherwise
- *	you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- *	This symbol is set to 'struct direct' or 'struct dirent' depending on
- *	whether dirent is available or not. You should use this pseudo type to
- *	portably declare your directory entries.
- */
-#define I_DIRENT		/**/
-#define DIRNAMLEN	/**/
-#define Direntry_t struct direct
-
-/* I_GRP:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <grp.h>.
- */
-/* GRPASSWD:
- *	This symbol, if defined, indicates to the C program that struct group
- *	in <grp.h> contains gr_passwd.
- */
-/*#define I_GRP		/ **/
-/*#define GRPASSWD	/ **/
-
-/* I_NDBM:
- *	This symbol, if defined, indicates that <ndbm.h> exists and should
- *	be included.
- */
-/* I_GDBMNDBM:
- *	This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
- *	be included.  This was the location of the ndbm.h compatibility file
- *	in RedHat 7.1.
- */
-/* I_GDBM_NDBM:
- *	This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
- *	be included.  This is the location of the ndbm.h compatibility file
- *	in Debian 4.0.
- */
-/* NDBM_H_USES_PROTOTYPES:
- *	This symbol, if defined, indicates that <ndbm.h> uses real ANSI C
- *	prototypes instead of K&R style function declarations without any
- *	parameter information. While ANSI C prototypes are supported in C++,
- *	K&R style function declarations will yield errors.
- */
-/* GDBMNDBM_H_USES_PROTOTYPES:
- *	This symbol, if defined, indicates that <gdbm/ndbm.h> uses real ANSI C
- *	prototypes instead of K&R style function declarations without any
- *	parameter information. While ANSI C prototypes are supported in C++,
- *	K&R style function declarations will yield errors.
- */
-/* GDBM_NDBM_H_USES_PROTOTYPES:
- *	This symbol, if defined, indicates that <gdbm-ndbm.h> uses real ANSI C
- *	prototypes instead of K&R style function declarations without any
- *	parameter information. While ANSI C prototypes are supported in C++,
- *	K&R style function declarations will yield errors.
- */
-/*#define I_NDBM	/ **/
-/*#define I_GDBMNDBM	/ **/
-/*#define I_GDBM_NDBM	/ **/
-/*#define NDBM_H_USES_PROTOTYPES	/ **/
-/*#define GDBMNDBM_H_USES_PROTOTYPES	/ **/
-/*#define GDBM_NDBM_H_USES_PROTOTYPES	/ **/
-
-/* I_NETDB:
- *	This symbol, if defined, indicates that <netdb.h> exists and
- *	should be included.
- */
-/*#define I_NETDB		/ **/
-
-/* I_NET_ERRNO:
- *	This symbol, if defined, indicates that <net/errno.h> exists and
- *	should be included.
- */
-/*#define I_NET_ERRNO		/ **/
-
-/* I_PWD:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <pwd.h>.
- */
-/* PWQUOTA:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_quota.
- */
-/* PWAGE:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_age.
- */
-/* PWCHANGE:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_change.
- */
-/* PWCLASS:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_class.
- */
-/* PWEXPIRE:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_expire.
- */
-/* PWCOMMENT:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_comment.
- */
-/* PWGECOS:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_gecos.
- */
-/* PWPASSWD:
- *	This symbol, if defined, indicates to the C program that struct passwd
- *	contains pw_passwd.
- */
-/*#define I_PWD		/ **/
-/*#define PWQUOTA	/ **/
-/*#define PWAGE	/ **/
-/*#define PWCHANGE	/ **/
-/*#define PWCLASS	/ **/
-/*#define PWEXPIRE	/ **/
-/*#define PWCOMMENT	/ **/
-/*#define PWGECOS	/ **/
-/*#define PWPASSWD	/ **/
-
-/* I_SYSUIO:
- *	This symbol, if defined, indicates that <sys/uio.h> exists and
- *	should be included.
- */
-/*#define	I_SYSUIO		/ **/
-
-/* I_STDARG:
- *	This symbol, if defined, indicates that <stdarg.h> exists and should
- *	be included.
- */
-/* I_VARARGS:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <varargs.h>.
- */
-#define I_STDARG		/**/
-/*#define I_VARARGS	/ **/
-
-/* Free_t:
- *	This variable contains the return type of free().  It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- *	This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t void *			/**/
-#define Free_t void			/**/
-
-/* PERL_MALLOC_WRAP:
- *	This symbol, if defined, indicates that we'd like malloc wrap checks.
- */
-#define PERL_MALLOC_WRAP		/**/
-
-/* MYMALLOC:
- *	This symbol, if defined, indicates that we're using our own malloc.
- */
-/*#define MYMALLOC			/ **/
-
-/* CAN_PROTOTYPE:
- *	If defined, this macro indicates that the C compiler can handle
- *	function prototypes.
- */
-/* _:
- *	This macro is used to declare function parameters for folks who want
- *	to make declarations with prototypes using a different style than
- *	the above macros.  Use double parentheses.  For example:
- *
- *		int main _((int argc, char *argv[]));
- */
-#define	CAN_PROTOTYPE	/**/
-#ifdef CAN_PROTOTYPE
-#define	_(args) args
-#else
-#define	_(args) ()
-#endif
-
-/* SH_PATH:
- *	This symbol contains the full pathname to the shell used on this
- *	on this system to execute Bourne shell scripts.  Usually, this will be
- *	/bin/sh, though it's possible that some systems will have /bin/ksh,
- *	/bin/pdksh, /bin/ash, /bin/bash, or even something such as
- *	D:/bin/sh.exe.
- */
-#define SH_PATH "cmd /x /c"  /**/
-
-/* SIG_NAME:
- *	This symbol contains a list of signal names in order of
- *	signal number. This is intended
- *	to be used as a static array initialization, like this:
- *		char *sig_name[] = { SIG_NAME };
- *	The signals in the list are separated with commas, and each signal
- *	is surrounded by double quotes. There is no leading SIG in the signal
- *	name, i.e. SIGQUIT is known as "QUIT".
- *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- *	etc., where nn is the actual signal number (e.g. NUM37).
- *	The signal number for sig_name[i] is stored in sig_num[i].
- *	The last element is 0 to terminate the list with a NULL.  This
- *	corresponds to the 0 at the end of the sig_name_init list.
- *	Note that this variable is initialized from the sig_name_init,
- *	not from sig_name (which is unused).
- */
-/* SIG_NUM:
- *	This symbol contains a list of signal numbers, in the same order as the
- *	SIG_NAME list. It is suitable for static array initialization, as in:
- *		int sig_num[] = { SIG_NUM };
- *	The signals in the list are separated with commas, and the indices
- *	within that list and the SIG_NAME list match, so it's easy to compute
- *	the signal name from a number or vice versa at the price of a small
- *	dynamic linear lookup.
- *	Duplicates are allowed, but are moved to the end of the list.
- *	The signal number corresponding to sig_name[i] is sig_number[i].
- *	if (i < NSIG) then sig_number[i] == i.
- *	The last element is 0, corresponding to the 0 at the end of
- *	the sig_name_init list.
- *	Note that this variable is initialized from the sig_num_init,
- *	not from sig_num (which is unused).
- */
-/* SIG_SIZE:
- *	This variable contains the number of elements of the SIG_NAME
- *	and SIG_NUM arrays, excluding the final NULL entry.
- */
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0		/**/
-#define SIG_NUM  0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0		/**/
-#define SIG_SIZE 27			/**/
-
-/* STDCHAR:
- *	This symbol is defined to be the type of char used in stdio.h.
- *	It has the values "unsigned char" or "char".
- */
-#define STDCHAR char	/**/
-
-/* VOIDFLAGS:
- *	This symbol indicates how much support of the void type is given by this
- *	compiler.  What various bits mean:
- *
- *	    1 = supports declaration of void
- *	    2 = supports arrays of pointers to functions returning void
- *	    4 = supports comparisons between pointers to void functions and
- *		    addresses of void functions
- *	    8 = supports declaration of generic void pointers
- *
- *	The package designer should define VOIDUSED to indicate the requirements
- *	of the package.  This can be done either by #defining VOIDUSED before
- *	including config.h, or by defining defvoidused in Myinit.U.  If the
- *	latter approach is taken, only those flags will be tested.  If the
- *	level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int		/* is void to be avoided? */
-#define M_VOID			/* Xenix strikes again */
-#endif
-
-/* PERL_USE_DEVEL:
- *	This symbol, if defined, indicates that Perl was configured with
- *	-Dusedevel, to enable development features.  This should not be
- *	done for production builds.
- */
-/*#define	PERL_USE_DEVEL		/ **/
-
-/* HAS_ATOLF:
- *	This symbol, if defined, indicates that the atolf routine is
- *	available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF		/ **/
-
-/* HAS_ATOLL:
- *	This symbol, if defined, indicates that the atoll routine is
- *	available to convert strings into long longs.
- */
-#define HAS_ATOLL		/**/
-
-/* HAS__FWALK:
- *	This symbol, if defined, indicates that the _fwalk system call is
- *	available to apply a function to all the file handles.
- */
-/*#define HAS__FWALK		/ **/
-
-/* HAS_AINTL:
- *	This symbol, if defined, indicates that the aintl routine is
- *	available.  If copysignl is also present we can emulate modfl.
- */
-/*#define HAS_AINTL		/ **/
-
-/* HAS_BUILTIN_CHOOSE_EXPR:
- *	Can we handle GCC builtin for compile-time ternary-like expressions
- */
-/* HAS_BUILTIN_EXPECT:
- *	Can we handle GCC builtin for telling that certain values are more
- *	likely
- */
-/*#define HAS_BUILTIN_EXPECT	/ **/
-/*#define HAS_BUILTIN_CHOOSE_EXPR	/ **/
-
-/* HAS_C99_VARIADIC_MACROS:
- *	If defined, the compiler supports C99 variadic macros.
- */
-/*#define	HAS_C99_VARIADIC_MACROS	/ **/
-
-/* HAS_CLASS:
- *	This symbol, if defined, indicates that the class routine is
- *	available to classify doubles.  Available for example in AIX.
- *	The returned values are defined in <float.h> and are:
- *
- *	FP_PLUS_NORM	Positive normalized, nonzero
- *	FP_MINUS_NORM	Negative normalized, nonzero
- *	FP_PLUS_DENORM	Positive denormalized, nonzero
- *	FP_MINUS_DENORM	Negative denormalized, nonzero
- *	FP_PLUS_ZERO	+0.0
- *	FP_MINUS_ZERO	-0.0
- *	FP_PLUS_INF	+INF
- *	FP_MINUS_INF	-INF
- *	FP_NANS		Signaling Not a Number (NaNS)
- *	FP_NANQ		Quiet Not a Number (NaNQ)
- */
-/*#define HAS_CLASS		/ **/
-
-/* HAS_CLEARENV:
- *	This symbol, if defined, indicates that the clearenv () routine is
- *	available for use.
- */
-/*#define HAS_CLEARENV		/ **/
-
-/* HAS_STRUCT_CMSGHDR:
- *	This symbol, if defined, indicates that the struct cmsghdr
- *	is supported.
- */
-/*#define HAS_STRUCT_CMSGHDR	/ **/
-
-/* HAS_COPYSIGNL:
- *	This symbol, if defined, indicates that the copysignl routine is
- *	available.  If aintl is also present we can emulate modfl.
- */
-/*#define HAS_COPYSIGNL		/ **/
-
-/* USE_CPLUSPLUS:
- *	This symbol, if defined, indicates that a C++ compiler was
- *	used to compiled Perl and will be used to compile extensions.
- */
-/*#define USE_CPLUSPLUS		/ **/
-
-/* HAS_DBMINIT_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the dbminit() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int dbminit(char *);
- */
-/*#define	HAS_DBMINIT_PROTO	/ **/
-
-/* HAS_DIR_DD_FD:
- *	This symbol, if defined, indicates that the the DIR* dirstream
- *	structure contains a member variable named dd_fd.
- */
-/*#define HAS_DIR_DD_FD		/ **/
-
-/* HAS_DIRFD:
- *	This manifest constant lets the C program know that dirfd
- *	is available.
- */
-/*#define HAS_DIRFD		/ **/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- *	This symbol, if defined, indicates that we need to prepend an
- *	underscore to the symbol name before calling dlsym().  This only
- *	makes sense if you *have* dlsym, which we will presume is the
- *	case if you're using dl_dlopen.xs.
- */
-/*#define 	DLSYM_NEEDS_UNDERSCORE 	/ **/
-
-/* HAS_FAST_STDIO:
- *	This symbol, if defined, indicates that the "fast stdio"
- *	is available to manipulate the stdio buffers directly.
- */
-#define HAS_FAST_STDIO		/**/
-
-/* HAS_FCHDIR:
- *	This symbol, if defined, indicates that the fchdir routine is
- *	available to change directory using a file descriptor.
- */
-/*#define HAS_FCHDIR		/ **/
-
-/* FCNTL_CAN_LOCK:
- *	This symbol, if defined, indicates that fcntl() can be used
- *	for file locking.  Normally on Unix systems this is defined.
- *	It may be undefined on VMS.
- */
-/*#define FCNTL_CAN_LOCK		/ **/
-
-/* HAS_FINITE:
- *	This symbol, if defined, indicates that the finite routine is
- *	available to check whether a double is finite (non-infinity non-NaN).
- */
-/*#define HAS_FINITE		/ **/
-
-/* HAS_FINITEL:
- *	This symbol, if defined, indicates that the finitel routine is
- *	available to check whether a long double is finite
- *	(non-infinity non-NaN).
- */
-/*#define HAS_FINITEL		/ **/
-
-/* HAS_FLOCK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the flock() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int flock(int, int);
- */
-#define	HAS_FLOCK_PROTO	/**/
-
-/* HAS_FP_CLASS:
- *	This symbol, if defined, indicates that the fp_class routine is
- *	available to classify doubles.  Available for example in Digital UNIX.
- *	The returned values are defined in <math.h> and are:
- *
- *	FP_SNAN           Signaling NaN (Not-a-Number)
- *	FP_QNAN           Quiet NaN (Not-a-Number)
- *	FP_POS_INF        +infinity
- *	FP_NEG_INF        -infinity
- *	FP_POS_NORM       Positive normalized
- *	FP_NEG_NORM       Negative normalized
- *	FP_POS_DENORM     Positive denormalized
- *	FP_NEG_DENORM     Negative denormalized
- *	FP_POS_ZERO       +0.0 (positive zero)
- *	FP_NEG_ZERO       -0.0 (negative zero)
- */
-/*#define HAS_FP_CLASS		/ **/
-
-/* HAS_FPCLASS:
- *	This symbol, if defined, indicates that the fpclass routine is
- *	available to classify doubles.  Available for example in Solaris/SVR4.
- *	The returned values are defined in <ieeefp.h> and are:
- *
- *	FP_SNAN		signaling NaN
- *	FP_QNAN		quiet NaN
- *	FP_NINF		negative infinity
- *	FP_PINF		positive infinity
- *	FP_NDENORM	negative denormalized non-zero
- *	FP_PDENORM	positive denormalized non-zero
- *	FP_NZERO	negative zero
- *	FP_PZERO	positive zero
- *	FP_NNORM	negative normalized non-zero
- *	FP_PNORM	positive normalized non-zero
- */
-/*#define HAS_FPCLASS		/ **/
-
-/* HAS_FPCLASSIFY:
- *	This symbol, if defined, indicates that the fpclassify routine is
- *	available to classify doubles.  Available for example in HP-UX.
- *	The returned values are defined in <math.h> and are
- *
- *           FP_NORMAL     Normalized
- *           FP_ZERO       Zero
- *           FP_INFINITE   Infinity
- *           FP_SUBNORMAL  Denormalized
- *           FP_NAN        NaN
- *
- */
-/*#define HAS_FPCLASSIFY		/ **/
-
-/* HAS_FPCLASSL:
- *	This symbol, if defined, indicates that the fpclassl routine is
- *	available to classify long doubles.  Available for example in IRIX.
- *	The returned values are defined in <ieeefp.h> and are:
- *
- *	FP_SNAN		signaling NaN
- *	FP_QNAN		quiet NaN
- *	FP_NINF		negative infinity
- *	FP_PINF		positive infinity
- *	FP_NDENORM	negative denormalized non-zero
- *	FP_PDENORM	positive denormalized non-zero
- *	FP_NZERO	negative zero
- *	FP_PZERO	positive zero
- *	FP_NNORM	negative normalized non-zero
- *	FP_PNORM	positive normalized non-zero
- */
-/*#define HAS_FPCLASSL		/ **/
-
-/* HAS_FPOS64_T:
- *	This symbol will be defined if the C compiler supports fpos64_t.
- */
-/*#define	HAS_FPOS64_T    	/ **/
-
-/* HAS_FREXPL:
- *	This symbol, if defined, indicates that the frexpl routine is
- *	available to break a long double floating-point number into
- *	a normalized fraction and an integral power of 2.
- */
-/*#define HAS_FREXPL		/ **/
-
-/* HAS_STRUCT_FS_DATA:
- *	This symbol, if defined, indicates that the struct fs_data
- *	to do statfs() is supported.
- */
-/*#define HAS_STRUCT_FS_DATA	/ **/
-
-/* HAS_FSEEKO:
- *	This symbol, if defined, indicates that the fseeko routine is
- *	available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FSEEKO		/ **/
-
-/* HAS_FSTATFS:
- *	This symbol, if defined, indicates that the fstatfs routine is
- *	available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATFS		/ **/
-
-/* HAS_FSYNC:
- *	This symbol, if defined, indicates that the fsync routine is
- *	available to write a file's modified data and attributes to
- *	permanent storage.
- */
-/*#define HAS_FSYNC		/ **/
-
-/* HAS_FTELLO:
- *	This symbol, if defined, indicates that the ftello routine is
- *	available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FTELLO		/ **/
-
-/* HAS_FUTIMES:
- *	This symbol, if defined, indicates that the futimes routine is
- *	available to change file descriptor time stamps with struct timevals.
- */
-/*#define HAS_FUTIMES		/ **/
-
-/* HAS_GETADDRINFO:
- *	This symbol, if defined, indicates that the getaddrinfo() function
- *	is available for use.
- */
-/*#define HAS_GETADDRINFO		/ **/
-
-/* HAS_GETCWD:
- *	This symbol, if defined, indicates that the getcwd routine is
- *	available to get the current working directory.
- */
-#define HAS_GETCWD		/**/
-
-/* HAS_GETESPWNAM:
- *	This symbol, if defined, indicates that the getespwnam system call is
- *	available to retrieve enhanced (shadow) password entries by name.
- */
-/*#define HAS_GETESPWNAM		/ **/
-
-/* HAS_GETFSSTAT:
- *	This symbol, if defined, indicates that the getfsstat routine is
- *	available to stat filesystems in bulk.
- */
-/*#define HAS_GETFSSTAT		/ **/
-
-/* HAS_GETITIMER:
- *	This symbol, if defined, indicates that the getitimer routine is
- *	available to return interval timers.
- */
-/*#define HAS_GETITIMER		/ **/
-
-/* HAS_GETMNT:
- *	This symbol, if defined, indicates that the getmnt routine is
- *	available to get filesystem mount info by filename.
- */
-/*#define HAS_GETMNT		/ **/
-
-/* HAS_GETMNTENT:
- *	This symbol, if defined, indicates that the getmntent routine is
- *	available to iterate through mounted file systems to get their info.
- */
-/*#define HAS_GETMNTENT		/ **/
-
-/* HAS_GETNAMEINFO:
- *	This symbol, if defined, indicates that the getnameinfo() function
- *	is available for use.
- */
-/*#define HAS_GETNAMEINFO		/ **/
-
-/* HAS_GETPRPWNAM:
- *	This symbol, if defined, indicates that the getprpwnam system call is
- *	available to retrieve protected (shadow) password entries by name.
- */
-/*#define HAS_GETPRPWNAM		/ **/
-
-/* HAS_GETSPNAM:
- *	This symbol, if defined, indicates that the getspnam system call is
- *	available to retrieve SysV shadow password entries by name.
- */
-/*#define HAS_GETSPNAM		/ **/
-
-/* HAS_HASMNTOPT:
- *	This symbol, if defined, indicates that the hasmntopt routine is
- *	available to query the mount options of file systems.
- */
-/*#define HAS_HASMNTOPT		/ **/
-
-/* HAS_ILOGBL:
- *	This symbol, if defined, indicates that the ilogbl routine is
- *	available.  If scalbnl is also present we can emulate frexpl.
- */
-/*#define HAS_ILOGBL		/ **/
-
-/* HAS_INETNTOP:
- *	This symbol, if defined, indicates that the inet_ntop() function
- *	is available to parse IPv4 and IPv6 strings.
- */
-/*#define HAS_INETNTOP		/ **/
-
-/* HAS_INETPTON:
- *	This symbol, if defined, indicates that the inet_pton() function
- *	is available to parse IPv4 and IPv6 strings.
- */
-/*#define HAS_INETPTON		/ **/
-
-/* HAS_INT64_T:
- *     This symbol will defined if the C compiler supports int64_t.
- *     Usually the <inttypes.h> needs to be included, but sometimes
- *	<sys/types.h> is enough.
- */
-/*#define     HAS_INT64_T               / **/
-
-/* HAS_ISFINITE:
- *	This symbol, if defined, indicates that the isfinite routine is
- *	available to check whether a double is finite (non-infinity non-NaN).
- */
-/*#define HAS_ISFINITE		/ **/
-
-/* HAS_ISINF:
- *	This symbol, if defined, indicates that the isinf routine is
- *	available to check whether a double is an infinity.
- */
-/*#define HAS_ISINF		/ **/
-
-/* HAS_ISNAN:
- *	This symbol, if defined, indicates that the isnan routine is
- *	available to check whether a double is a NaN.
- */
-#define HAS_ISNAN		/**/
-
-/* HAS_ISNANL:
- *	This symbol, if defined, indicates that the isnanl routine is
- *	available to check whether a long double is a NaN.
- */
-/*#define HAS_ISNANL		/ **/
-
-/* HAS_LDBL_DIG:
- *	This symbol, if defined, indicates that this system's <float.h>
- *	or <limits.h> defines the symbol LDBL_DIG, which is the number
- *	of significant digits in a long double precision number. Unlike
- *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#define HAS_LDBL_DIG 	/**/
-
-/* LIBM_LIB_VERSION:
- *	This symbol, if defined, indicates that libm exports _LIB_VERSION
- *	and that math.h defines the enum to manipulate it.
- */
-/*#define LIBM_LIB_VERSION		/ **/
-
-/* HAS_MADVISE:
- *	This symbol, if defined, indicates that the madvise system call is
- *	available to map a file into memory.
- */
-/*#define HAS_MADVISE		/ **/
-
-/* HAS_MALLOC_SIZE:
- *	This symbol, if defined, indicates that the malloc_size
- *	routine is available for use.
- */
-/*#define HAS_MALLOC_SIZE		/ **/
-
-/* HAS_MALLOC_GOOD_SIZE:
- *	This symbol, if defined, indicates that the malloc_good_size
- *	routine is available for use.
- */
-/*#define HAS_MALLOC_GOOD_SIZE	/ **/
-
-/* HAS_MKDTEMP:
- *	This symbol, if defined, indicates that the mkdtemp routine is
- *	available to exclusively create a uniquely named temporary directory.
- */
-/*#define HAS_MKDTEMP		/ **/
-
-/* HAS_MKSTEMPS:
- *	This symbol, if defined, indicates that the mkstemps routine is
- *	available to exclusively create and open a uniquely named
- *	(with a suffix) temporary file.
- */
-/*#define HAS_MKSTEMPS		/ **/
-
-/* HAS_MODFL:
- *	This symbol, if defined, indicates that the modfl routine is
- *	available to split a long double x into a fractional part f and
- *	an integer part i such that |f| < 1.0 and (f + i) = x.
- */
-/* HAS_MODFL_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the modfl() function.  Otherwise, it is up
- *	to the program to supply one.
- */
-/* HAS_MODFL_POW32_BUG:
- *	This symbol, if defined, indicates that the modfl routine is
- *	broken for long doubles >= pow(2, 32).
- *	For example from 4294967303.150000 one would get 4294967302.000000
- *	and 1.150000.  The bug has been seen in certain versions of glibc,
- *	release 2.2.2 is known to be okay.
- */
-/*#define HAS_MODFL		/ **/
-/*#define HAS_MODFL_PROTO		/ **/
-/*#define HAS_MODFL_POW32_BUG		/ **/
-
-/* HAS_MPROTECT:
- *	This symbol, if defined, indicates that the mprotect system call is
- *	available to modify the access protection of a memory mapped file.
- */
-/*#define HAS_MPROTECT		/ **/
-
-/* HAS_STRUCT_MSGHDR:
- *	This symbol, if defined, indicates that the struct msghdr
- *	is supported.
- */
-/*#define HAS_STRUCT_MSGHDR	/ **/
-
-/* HAS_NL_LANGINFO:
- *	This symbol, if defined, indicates that the nl_langinfo routine is
- *	available to return local data.  You will also need <langinfo.h>
- *	and therefore I_LANGINFO.
- */
-/*#define HAS_NL_LANGINFO		/ **/
-
-/* HAS_OFF64_T:
- *	This symbol will be defined if the C compiler supports off64_t.
- */
-/*#define	HAS_OFF64_T    		/ **/
-
-/* HAS_PRCTL:
- *	This symbol, if defined, indicates that the prctl routine is
- *	available to set process title.
- */
-/* HAS_PRCTL_SET_NAME:
- *	This symbol, if defined, indicates that the prctl routine is
- *	available to set process title and supports PR_SET_NAME.
- */
-/*#define HAS_PRCTL		/ **/
-/*#define HAS_PRCTL_SET_NAME		/ **/
-
-/* HAS_PROCSELFEXE:
- *	This symbol is defined if PROCSELFEXE_PATH is a symlink
- *	to the absolute pathname of the executing program.
- */
-/* PROCSELFEXE_PATH:
- *	If HAS_PROCSELFEXE is defined this symbol is the filename
- *	of the symbolic link pointing to the absolute pathname of
- *	the executing program.
- */
-/*#define HAS_PROCSELFEXE	/ **/
-#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
-#define PROCSELFEXE_PATH		/**/
-#endif
-
-/* HAS_PTHREAD_ATTR_SETSCOPE:
- *	This symbol, if defined, indicates that the pthread_attr_setscope
- *	system call is available to set the contention scope attribute of
- *	a thread attribute object.
- */
-/*#define HAS_PTHREAD_ATTR_SETSCOPE		/ **/
-
-/* HAS_READV:
- *	This symbol, if defined, indicates that the readv routine is
- *	available to do gather reads.  You will also need <sys/uio.h>
- *	and there I_SYSUIO.
- */
-/*#define HAS_READV		/ **/
-
-/* HAS_RECVMSG:
- *	This symbol, if defined, indicates that the recvmsg routine is
- *	available to send structured socket messages.
- */
-/*#define HAS_RECVMSG		/ **/
-
-/* HAS_SBRK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the sbrk() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern void* sbrk(int);
- *		extern void* sbrk(size_t);
- */
-/*#define	HAS_SBRK_PROTO	/ **/
-
-/* HAS_SCALBNL:
- *	This symbol, if defined, indicates that the scalbnl routine is
- *	available.  If ilogbl is also present we can emulate frexpl.
- */
-/*#define HAS_SCALBNL		/ **/
-
-/* HAS_SENDMSG:
- *	This symbol, if defined, indicates that the sendmsg routine is
- *	available to send structured socket messages.
- */
-/*#define HAS_SENDMSG		/ **/
-
-/* HAS_SETITIMER:
- *	This symbol, if defined, indicates that the setitimer routine is
- *	available to set interval timers.
- */
-/*#define HAS_SETITIMER		/ **/
-
-/* HAS_SETPROCTITLE:
- *	This symbol, if defined, indicates that the setproctitle routine is
- *	available to set process title.
- */
-/*#define HAS_SETPROCTITLE		/ **/
-
-/* USE_SFIO:
- *	This symbol, if defined, indicates that sfio should
- *	be used.
- */
-/*#define	USE_SFIO		/ **/
-
-/* HAS_SIGNBIT:
- *	This symbol, if defined, indicates that the signbit routine is
- *	available to check if the given number has the sign bit set.
- *	This should include correct testing of -0.0.  This will only be set
- *	if the signbit() routine is safe to use with the NV type used internally
- *	in perl.  Users should call Perl_signbit(), which will be #defined to
- *	the system's signbit() function or macro if this symbol is defined.
- */
-/*#define HAS_SIGNBIT		/ **/
-
-/* HAS_SIGPROCMASK:
- *	This symbol, if defined, indicates that the sigprocmask
- *	system call is available to examine or change the signal mask
- *	of the calling process.
- */
-/*#define HAS_SIGPROCMASK		/ **/
-
-/* USE_SITECUSTOMIZE:
- *	This symbol, if defined, indicates that sitecustomize should
- *	be used.
- */
-#ifndef USE_SITECUSTOMIZE
-/*#define	USE_SITECUSTOMIZE		/ **/
-#endif
-
-/* HAS_SNPRINTF:
- *	This symbol, if defined, indicates that the snprintf () library
- *	function is available for use.
- */
-/* HAS_VSNPRINTF:
- *	This symbol, if defined, indicates that the vsnprintf () library
- *	function is available for use.
- */
-#define HAS_SNPRINTF	/**/
-#define HAS_VSNPRINTF	/**/
-
-/* HAS_SOCKATMARK:
- *	This symbol, if defined, indicates that the sockatmark routine is
- *	available to test whether a socket is at the out-of-band mark.
- */
-/*#define HAS_SOCKATMARK		/ **/
-
-/* HAS_SOCKATMARK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the sockatmark() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int sockatmark(int);
- */
-/*#define	HAS_SOCKATMARK_PROTO	/ **/
-
-/* HAS_SOCKS5_INIT:
- *	This symbol, if defined, indicates that the socks5_init routine is
- *	available to initialize SOCKS 5.
- */
-/*#define HAS_SOCKS5_INIT		/ **/
-
-/* SPRINTF_RETURNS_STRLEN:
- *	This variable defines whether sprintf returns the length of the string
- *	(as per the ANSI spec). Some C libraries retain compatibility with
- *	pre-ANSI C and return a pointer to the passed in buffer; for these
- *	this variable will be undef.
- */
-#define SPRINTF_RETURNS_STRLEN	/**/
-
-/* HAS_SQRTL:
- *	This symbol, if defined, indicates that the sqrtl routine is
- *	available to do long double square roots.
- */
-/*#define HAS_SQRTL		/ **/
-
-/* HAS_SETRESGID_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the setresgid() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
- */
-/*#define	HAS_SETRESGID_PROTO	/ **/
-
-/* HAS_SETRESUID_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the setresuid() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
- */
-/*#define	HAS_SETRESUID_PROTO	/ **/
-
-/* HAS_STRUCT_STATFS_F_FLAGS:
- *	This symbol, if defined, indicates that the struct statfs
- *	does have the f_flags member containing the mount flags of
- *	the filesystem containing the file.
- *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
- *	have statfs() and struct statfs, they have ustat() and getmnt()
- *	with struct ustat and struct fs_data.
- */
-/*#define HAS_STRUCT_STATFS_F_FLAGS		/ **/
-
-/* HAS_STRUCT_STATFS:
- *	This symbol, if defined, indicates that the struct statfs
- *	to do statfs() is supported.
- */
-/*#define HAS_STRUCT_STATFS	/ **/
-
-/* HAS_FSTATVFS:
- *	This symbol, if defined, indicates that the fstatvfs routine is
- *	available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATVFS		/ **/
-
-/* HAS_STRFTIME:
- *	This symbol, if defined, indicates that the strftime routine is
- *	available to do time formatting.
- */
-#define HAS_STRFTIME		/**/
-
-/* HAS_STRLCAT:
- *	This symbol, if defined, indicates that the strlcat () routine is
- *	available to do string concatenation.
- */
-/*#define HAS_STRLCAT		/ **/
-
-/* HAS_STRLCPY:
- *	This symbol, if defined, indicates that the strlcpy () routine is
- *	available to do string copying.
- */
-/*#define HAS_STRLCPY		/ **/
-
-/* HAS_STRTOLD:
- *	This symbol, if defined, indicates that the strtold routine is
- *	available to convert strings to long doubles.
- */
-/*#define HAS_STRTOLD		/ **/
-
-/* HAS_STRTOLL:
- *	This symbol, if defined, indicates that the strtoll routine is
- *	available to convert strings to long longs.
- */
-#define HAS_STRTOLL		/**/
-
-/* HAS_STRTOQ:
- *	This symbol, if defined, indicates that the strtoq routine is
- *	available to convert strings to long longs (quads).
- */
-/*#define HAS_STRTOQ		/ **/
-
-/* HAS_STRTOULL:
- *	This symbol, if defined, indicates that the strtoull routine is
- *	available to convert strings to unsigned long longs.
- */
-#define HAS_STRTOULL		/**/
-
-/* HAS_STRTOUQ:
- *	This symbol, if defined, indicates that the strtouq routine is
- *	available to convert strings to unsigned long longs (quads).
- */
-/*#define HAS_STRTOUQ		/ **/
-
-/* HAS_SYSCALL_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the syscall() function.  Otherwise, it is up
- *	to the program to supply one.  Good guesses are
- *		extern int syscall(int,  ...);
- *		extern int syscall(long, ...);
- */
-/*#define	HAS_SYSCALL_PROTO	/ **/
-
-/* HAS_TELLDIR_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the telldir() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern long telldir(DIR*);
- */
-#define	HAS_TELLDIR_PROTO	/**/
-
-/* HAS_CTIME64:
- *	This symbol, if defined, indicates that the ctime64 () routine is
- *	available to do the 64bit variant of ctime ()
- */
-/* HAS_LOCALTIME64:
- *	This symbol, if defined, indicates that the localtime64 () routine is
- *	available to do the 64bit variant of localtime ()
- */
-/* HAS_GMTIME64:
- *	This symbol, if defined, indicates that the gmtime64 () routine is
- *	available to do the 64bit variant of gmtime ()
- */
-/* HAS_MKTIME64:
- *	This symbol, if defined, indicates that the mktime64 () routine is
- *	available to do the 64bit variant of mktime ()
- */
-/* HAS_DIFFTIME64:
- *	This symbol, if defined, indicates that the difftime64 () routine is
- *	available to do the 64bit variant of difftime ()
- */
-/* HAS_ASCTIME64:
- *	This symbol, if defined, indicates that the asctime64 () routine is
- *	available to do the 64bit variant of asctime ()
- */
-/*#define	HAS_CTIME64		/ **/
-/*#define	HAS_LOCALTIME64		/ **/
-/*#define	HAS_GMTIME64		/ **/
-/*#define	HAS_MKTIME64		/ **/
-/*#define	HAS_DIFFTIME64		/ **/
-/*#define	HAS_ASCTIME64		/ **/
-
-/* HAS_TIMEGM:
- *	This symbol, if defined, indicates that the timegm routine is
- *	available to do the opposite of gmtime ()
- */
-/*#define HAS_TIMEGM		/ **/
-
-/* U32_ALIGNMENT_REQUIRED:
- *	This symbol, if defined, indicates that you must access
- *	character data through U32-aligned pointers.
- */
-#ifndef U32_ALIGNMENT_REQUIRED
-#define U32_ALIGNMENT_REQUIRED	/**/
-#endif
-
-/* HAS_UALARM:
- *	This symbol, if defined, indicates that the ualarm routine is
- *	available to do alarms with microsecond granularity.
- */
-/*#define HAS_UALARM		/ **/
-
-/* HAS_UNORDERED:
- *	This symbol, if defined, indicates that the unordered routine is
- *	available to check whether two doubles are unordered
- *	(effectively: whether either of them is NaN)
- */
-/*#define HAS_UNORDERED		/ **/
-
-/* HAS_UNSETENV:
- *	This symbol, if defined, indicates that the unsetenv () routine is
- *	available for use.
- */
-/*#define HAS_UNSETENV		/ **/
-
-/* HAS_USLEEP_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the usleep() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern int usleep(useconds_t);
- */
-/*#define	HAS_USLEEP_PROTO	/ **/
-
-/* HAS_USTAT:
- *	This symbol, if defined, indicates that the ustat system call is
- *	available to query file system statistics by dev_t.
- */
-/*#define HAS_USTAT		/ **/
-
-/* HAS_WRITEV:
- *	This symbol, if defined, indicates that the writev routine is
- *	available to do scatter writes.
- */
-/*#define HAS_WRITEV		/ **/
-
-/* USE_DYNAMIC_LOADING:
- *	This symbol, if defined, indicates that dynamic loading of
- *	some sort is available.
- */
-#define USE_DYNAMIC_LOADING		/**/
-
-/* FFLUSH_NULL:
- *	This symbol, if defined, tells that fflush(NULL) does flush
- *	all pending stdio output.
- */
-/* FFLUSH_ALL:
- *	This symbol, if defined, tells that to flush
- *	all pending stdio output one must loop through all
- *	the stdio file handles stored in an array and fflush them.
- *	Note that if fflushNULL is defined, fflushall will not
- *	even be probed for and will be left undefined.
- */
-#define	FFLUSH_NULL 		/**/
-/*#define	FFLUSH_ALL 		/ **/
-
-/* I_ASSERT:
- *	This symbol, if defined, indicates that <assert.h> exists and
- *	could be included by the C program to get the assert() macro.
- */
-#define	I_ASSERT		/**/
-
-/* I_CRYPT:
- *	This symbol, if defined, indicates that <crypt.h> exists and
- *	should be included.
- */
-/*#define	I_CRYPT		/ **/
-
-/* DB_Prefix_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- *	This symbol contains the type of the prefix structure element
- *	in the <db.h> header file.  In older versions of DB, it was
- *	int, while in newer ones it is size_t.
- */
-/* DB_VERSION_MAJOR_CFG:
- *	This symbol, if defined, defines the major version number of
- *	Berkeley DB found in the <db.h> header when Perl was configured.
- */
-/* DB_VERSION_MINOR_CFG:
- *	This symbol, if defined, defines the minor version number of
- *	Berkeley DB found in the <db.h> header when Perl was configured.
- *	For DB version 1 this is always 0.
- */
-/* DB_VERSION_PATCH_CFG:
- *	This symbol, if defined, defines the patch version number of
- *	Berkeley DB found in the <db.h> header when Perl was configured.
- *	For DB version 1 this is always 0.
- */
-#define DB_Hash_t	int		/**/
-#define DB_Prefix_t	int  	/**/
-#define DB_VERSION_MAJOR_CFG	0  	/**/
-#define DB_VERSION_MINOR_CFG	0  	/**/
-#define DB_VERSION_PATCH_CFG	0  	/**/
-
-/* I_FP:
- *	This symbol, if defined, indicates that <fp.h> exists and
- *	should be included.
- */
-/*#define	I_FP		/ **/
-
-/* I_FP_CLASS:
- *	This symbol, if defined, indicates that <fp_class.h> exists and
- *	should be included.
- */
-/*#define	I_FP_CLASS		/ **/
-
-/* I_IEEEFP:
- *	This symbol, if defined, indicates that <ieeefp.h> exists and
- *	should be included.
- */
-/*#define	I_IEEEFP		/ **/
-
-/* I_INTTYPES:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <inttypes.h>.
- */
-/*#define   I_INTTYPES                / **/
-
-/* I_LANGINFO:
- *	This symbol, if defined, indicates that <langinfo.h> exists and
- *	should be included.
- */
-/*#define	I_LANGINFO		/ **/
-
-/* I_LIBUTIL:
- *	This symbol, if defined, indicates that <libutil.h> exists and
- *	should be included.
- */
-/*#define	I_LIBUTIL		/ **/
-
-/* I_MALLOCMALLOC:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <malloc/malloc.h>.
- */
-/*#define I_MALLOCMALLOC		/ **/
-
-/* I_MNTENT:
- *	This symbol, if defined, indicates that <mntent.h> exists and
- *	should be included.
- */
-/*#define	I_MNTENT		/ **/
-
-/* I_NETINET_TCP:
- *     This symbol, if defined, indicates to the C program that it should
- *     include <netinet/tcp.h>.
- */
-/*#define   I_NETINET_TCP                / **/
-
-/* I_POLL:
- *	This symbol, if defined, indicates that <poll.h> exists and
- *	should be included. (see also HAS_POLL)
- */
-/*#define	I_POLL		/ **/
-
-/* I_PROT:
- *	This symbol, if defined, indicates that <prot.h> exists and
- *	should be included.
- */
-/*#define	I_PROT		/ **/
-
-/* I_SHADOW:
- *	This symbol, if defined, indicates that <shadow.h> exists and
- *	should be included.
- */
-/*#define	I_SHADOW		/ **/
-
-/* I_SOCKS:
- *	This symbol, if defined, indicates that <socks.h> exists and
- *	should be included.
- */
-/*#define	I_SOCKS		/ **/
-
-/* I_SUNMATH:
- *	This symbol, if defined, indicates that <sunmath.h> exists and
- *	should be included.
- */
-/*#define	I_SUNMATH		/ **/
-
-/* I_SYSLOG:
- *	This symbol, if defined, indicates that <syslog.h> exists and
- *	should be included.
- */
-/*#define	I_SYSLOG		/ **/
-
-/* I_SYSMODE:
- *	This symbol, if defined, indicates that <sys/mode.h> exists and
- *	should be included.
- */
-/*#define	I_SYSMODE		/ **/
-
-/* I_SYS_MOUNT:
- *	This symbol, if defined, indicates that <sys/mount.h> exists and
- *	should be included.
- */
-/*#define	I_SYS_MOUNT		/ **/
-
-/* I_SYS_STATFS:
- *	This symbol, if defined, indicates that <sys/statfs.h> exists.
- */
-/*#define	I_SYS_STATFS		/ **/
-
-/* I_SYS_STATVFS:
- *	This symbol, if defined, indicates that <sys/statvfs.h> exists and
- *	should be included.
- */
-/*#define	I_SYS_STATVFS		/ **/
-
-/* I_SYSUTSNAME:
- *	This symbol, if defined, indicates that <sys/utsname.h> exists and
- *	should be included.
- */
-/*#define	I_SYSUTSNAME		/ **/
-
-/* I_SYS_VFS:
- *	This symbol, if defined, indicates that <sys/vfs.h> exists and
- *	should be included.
- */
-/*#define	I_SYS_VFS		/ **/
-
-/* I_USTAT:
- *	This symbol, if defined, indicates that <ustat.h> exists and
- *	should be included.
- */
-/*#define	I_USTAT		/ **/
-
-/* PERL_PRIfldbl:
- *	This symbol, if defined, contains the string used by stdio to
- *	format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- *	This symbol, if defined, contains the string used by stdio to
- *	format long doubles (format 'g') for output.
- */
-/* PERL_PRIeldbl:
- *	This symbol, if defined, contains the string used by stdio to
- *	format long doubles (format 'e') for output.
- */
-/* PERL_SCNfldbl:
- *	This symbol, if defined, contains the string used by stdio to
- *	format long doubles (format 'f') for input.
- */
-/*#define PERL_PRIfldbl	"f"	/ **/
-/*#define PERL_PRIgldbl	"g"	/ **/
-/*#define PERL_PRIeldbl	"e"	/ **/
-/*#define PERL_SCNfldbl	"f"	/ **/
-
-/* PERL_MAD:
- *	This symbol, if defined, indicates that the Misc Attribution
- *	Declaration code should be conditionally compiled.
- */
-/*#define	PERL_MAD		/ **/
-
-/* NEED_VA_COPY:
- *	This symbol, if defined, indicates that the system stores
- *	the variable argument list datatype, va_list, in a format
- *	that cannot be copied by simple assignment, so that some
- *	other means must be used when copying is required.
- *	As such systems vary in their provision (or non-provision)
- *	of copying mechanisms, handy.h defines a platform-
- *	independent macro, Perl_va_copy(src, dst), to do the job.
- */
-/*#define	NEED_VA_COPY		/ **/
-
-/* IVTYPE:
- *	This symbol defines the C type used for Perl's IV.
- */
-/* UVTYPE:
- *	This symbol defines the C type used for Perl's UV.
- */
-/* I8TYPE:
- *	This symbol defines the C type used for Perl's I8.
- */
-/* U8TYPE:
- *	This symbol defines the C type used for Perl's U8.
- */
-/* I16TYPE:
- *	This symbol defines the C type used for Perl's I16.
- */
-/* U16TYPE:
- *	This symbol defines the C type used for Perl's U16.
- */
-/* I32TYPE:
- *	This symbol defines the C type used for Perl's I32.
- */
-/* U32TYPE:
- *	This symbol defines the C type used for Perl's U32.
- */
-/* I64TYPE:
- *	This symbol defines the C type used for Perl's I64.
- */
-/* U64TYPE:
- *	This symbol defines the C type used for Perl's U64.
- */
-/* NVTYPE:
- *	This symbol defines the C type used for Perl's NV.
- */
-/* IVSIZE:
- *	This symbol contains the sizeof(IV).
- */
-/* UVSIZE:
- *	This symbol contains the sizeof(UV).
- */
-/* I8SIZE:
- *	This symbol contains the sizeof(I8).
- */
-/* U8SIZE:
- *	This symbol contains the sizeof(U8).
- */
-/* I16SIZE:
- *	This symbol contains the sizeof(I16).
- */
-/* U16SIZE:
- *	This symbol contains the sizeof(U16).
- */
-/* I32SIZE:
- *	This symbol contains the sizeof(I32).
- */
-/* U32SIZE:
- *	This symbol contains the sizeof(U32).
- */
-/* I64SIZE:
- *	This symbol contains the sizeof(I64).
- */
-/* U64SIZE:
- *	This symbol contains the sizeof(U64).
- */
-/* NVSIZE:
- *	This symbol contains the sizeof(NV).
- */
-/* NV_PRESERVES_UV:
- *	This symbol, if defined, indicates that a variable of type NVTYPE
- *	can preserve all the bits of a variable of type UVTYPE.
- */
-/* NV_PRESERVES_UV_BITS:
- *	This symbol contains the number of bits a variable of type NVTYPE
- *	can preserve of a variable of type UVTYPE.
- */
-/* NV_OVERFLOWS_INTEGERS_AT:
- *	This symbol gives the largest integer value that NVs can hold. This
- *	value + 1.0 cannot be stored accurately. It is expressed as constant
- *	floating point expression to reduce the chance of decimal/binary
- *	conversion issues. If it can not be determined, the value 0 is given.
- */
-/* NV_ZERO_IS_ALLBITS_ZERO:
- *	This symbol, if defined, indicates that a variable of type NVTYPE
- *	stores 0.0 in memory as all bits zero.
- */
-#define	IVTYPE		long long		/**/
-#define	UVTYPE		unsigned long long		/**/
-#define	I8TYPE		char		/**/
-#define	U8TYPE		unsigned char		/**/
-#define	I16TYPE		short	/**/
-#define	U16TYPE		unsigned short	/**/
-#define	I32TYPE		long	/**/
-#define	U32TYPE		unsigned long	/**/
-#ifdef HAS_QUAD
-#define	I64TYPE		long long	/**/
-#define	U64TYPE		unsigned long long	/**/
-#endif
-#define	NVTYPE		double		/**/
-#define	IVSIZE		8		/**/
-#define	UVSIZE		8		/**/
-#define	I8SIZE		1		/**/
-#define	U8SIZE		1		/**/
-#define	I16SIZE		2	/**/
-#define	U16SIZE		2	/**/
-#define	I32SIZE		4	/**/
-#define	U32SIZE		4	/**/
-#ifdef HAS_QUAD
-#define	I64SIZE		8	/**/
-#define	U64SIZE		8	/**/
-#endif
-#define	NVSIZE		8		/**/
-#undef	NV_PRESERVES_UV
-#define	NV_PRESERVES_UV_BITS	53
-#define	NV_OVERFLOWS_INTEGERS_AT	256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
-#define	NV_ZERO_IS_ALLBITS_ZERO
-#if UVSIZE == 8
-#   ifdef BYTEORDER
-#       if BYTEORDER == 0x1234
-#           undef BYTEORDER
-#           define BYTEORDER 0x12345678
-#       else
-#           if BYTEORDER == 0x4321
-#               undef BYTEORDER
-#               define BYTEORDER 0x87654321
-#           endif
-#       endif
-#   endif
-#endif
-
-/* IVdf:
- *	This symbol defines the format string used for printing a Perl IV
- *	as a signed decimal integer.
- */
-/* UVuf:
- *	This symbol defines the format string used for printing a Perl UV
- *	as an unsigned decimal integer.
- */
-/* UVof:
- *	This symbol defines the format string used for printing a Perl UV
- *	as an unsigned octal integer.
- */
-/* UVxf:
- *	This symbol defines the format string used for printing a Perl UV
- *	as an unsigned hexadecimal integer in lowercase abcdef.
- */
-/* UVXf:
- *	This symbol defines the format string used for printing a Perl UV
- *	as an unsigned hexadecimal integer in uppercase ABCDEF.
- */
-/* NVef:
- *	This symbol defines the format string used for printing a Perl NV
- *	using %e-ish floating point format.
- */
-/* NVff:
- *	This symbol defines the format string used for printing a Perl NV
- *	using %f-ish floating point format.
- */
-/* NVgf:
- *	This symbol defines the format string used for printing a Perl NV
- *	using %g-ish floating point format.
- */
-#define	IVdf		"I64d"		/**/
-#define	UVuf		"I64u"		/**/
-#define	UVof		"I64o"		/**/
-#define	UVxf		"I64x"		/**/
-#define	UVXf		"I64X"		/**/
-#define	NVef		"e"		/**/
-#define	NVff		"f"		/**/
-#define	NVgf		"g"		/**/
-
-/* SELECT_MIN_BITS:
- *	This symbol holds the minimum number of bits operated by select.
- *	That is, if you do select(n, ...), how many bits at least will be
- *	cleared in the masks if some activity is detected.  Usually this
- *	is either n or 32*ceil(n/32), especially many little-endians do
- *	the latter.  This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS 	32	/**/
-
-/* ST_INO_SIZE:
- *	This variable contains the size of struct stat's st_ino in bytes.
- */
-/* ST_INO_SIGN:
- *	This symbol holds the signedess of struct stat's st_ino.
- *	1 for unsigned, -1 for signed.
- */
-#define ST_INO_SIGN 1	/* st_ino sign */
-#define ST_INO_SIZE 4	/* st_ino size */
-
-/* STARTPERL:
- *	This variable contains the string to put in front of a perl
- *	script to make sure (one hopes) that it runs with perl and not
- *	some shell.
- */
-#define STARTPERL "#!perl"		/**/
-
-/* HAS_STDIO_STREAM_ARRAY:
- *	This symbol, if defined, tells that there is an array
- *	holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- *	This symbol tells the name of the array holding the stdio streams.
- *	Usual values include _iob, __iob, and __sF.
- */
-/*#define	HAS_STDIO_STREAM_ARRAY	/ **/
-#ifdef HAS_STDIO_STREAM_ARRAY
-#define STDIO_STREAM_ARRAY	
-#endif
-
-/* GMTIME_MAX:
- *	This symbol contains the maximum value for the time_t offset that
- *	the system function gmtime () accepts, and defaults to 0
- */
-/* GMTIME_MIN:
- *	This symbol contains the minimum value for the time_t offset that
- *	the system function gmtime () accepts, and defaults to 0
- */
-/* LOCALTIME_MAX:
- *	This symbol contains the maximum value for the time_t offset that
- *	the system function localtime () accepts, and defaults to 0
- */
-/* LOCALTIME_MIN:
- *	This symbol contains the minimum value for the time_t offset that
- *	the system function localtime () accepts, and defaults to 0
- */
-#define GMTIME_MAX		2147483647	/**/
-#define GMTIME_MIN		0	/**/
-#define LOCALTIME_MAX	2147483647	/**/
-#define LOCALTIME_MIN	0	/**/
-
-/* USE_64_BIT_INT:
- *	This symbol, if defined, indicates that 64-bit integers should
- *	be used when available.  If not defined, the native integers
- *	will be employed (be they 32 or 64 bits).  The minimal possible
- *	64-bitness is used, just enough to get 64-bit integers into Perl.
- *	This may mean using for example "long longs", while your memory
- *	may still be limited to 2 gigabytes.
- */
-/* USE_64_BIT_ALL:
- *	This symbol, if defined, indicates that 64-bit integers should
- *	be used when available.  If not defined, the native integers
- *	will be used (be they 32 or 64 bits).  The maximal possible
- *	64-bitness is employed: LP64 or ILP64, meaning that you will
- *	be able to use more than 2 gigabytes of memory.  This mode is
- *	even more binary incompatible than USE_64_BIT_INT. You may not
- *	be able to run the resulting executable in a 32-bit CPU at all or
- *	you may need at least to reboot your OS to 64-bit mode.
- */
-#ifndef USE_64_BIT_INT
-#define	USE_64_BIT_INT		/**/
-#endif
-#ifndef USE_64_BIT_ALL
-/*#define	USE_64_BIT_ALL		/ **/
-#endif
-
-/* USE_DTRACE:
- *	This symbol, if defined, indicates that Perl should
- *	be built with support for DTrace.
- */
-/*#define USE_DTRACE		/ **/
-
-/* USE_FAST_STDIO:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use 'fast stdio'.
- *	Defaults to define in Perls 5.8 and earlier, to undef later.
- */
-#ifndef USE_FAST_STDIO
-/*#define	USE_FAST_STDIO		/ **/
-#endif
-
-/* USE_LARGE_FILES:
- *	This symbol, if defined, indicates that large file support
- *	should be used when available.
- */
-#ifndef USE_LARGE_FILES
-/*#define	USE_LARGE_FILES		/ **/
-#endif
-
-/* USE_LONG_DOUBLE:
- *	This symbol, if defined, indicates that long doubles should
- *	be used when available.
- */
-#ifndef USE_LONG_DOUBLE
-/*#define	USE_LONG_DOUBLE		/ **/
-#endif
-
-/* USE_MORE_BITS:
- *	This symbol, if defined, indicates that 64-bit interfaces and
- *	long doubles should be used when available.
- */
-#ifndef USE_MORE_BITS
-/*#define	USE_MORE_BITS		/ **/
-#endif
-
-/* MULTIPLICITY:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use multiplicity.
- */
-#ifndef MULTIPLICITY
-/*#define	MULTIPLICITY		/ **/
-#endif
-
-/* USE_PERLIO:
- *	This symbol, if defined, indicates that the PerlIO abstraction should
- *	be used throughout.  If not defined, stdio should be
- *	used in a fully backward compatible manner.
- */
-#ifndef USE_PERLIO
-/*#define	USE_PERLIO		/ **/
-#endif
-
-/* USE_SOCKS:
- *	This symbol, if defined, indicates that Perl should
- *	be built to use socks.
- */
-#ifndef USE_SOCKS
-/*#define	USE_SOCKS		/ **/
-#endif
-
-/* HAS_DRAND48_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the drand48() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern double drand48(void);
- */
-/*#define	HAS_DRAND48_PROTO	/ **/
-
-/* HAS_GETHOST_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for gethostent(), gethostbyname(), and
- *	gethostbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETHOST_PROTOS	/**/
-
-/* HAS_GETNET_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getnetent(), getnetbyname(), and
- *	getnetbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-/*#define	HAS_GETNET_PROTOS	/ **/
-
-/* HAS_GETPROTO_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getprotoent(), getprotobyname(), and
- *	getprotobyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETPROTO_PROTOS	/**/
-
-/* HAS_GETSERV_PROTOS:
- *	This symbol, if defined, indicates that <netdb.h> includes
- *	prototypes for getservent(), getservbyname(), and
- *	getservbyaddr().  Otherwise, it is up to the program to guess
- *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define	HAS_GETSERV_PROTOS	/**/
-
-/* HAS_LSEEK_PROTO:
- *	This symbol, if defined, indicates that the system provides
- *	a prototype for the lseek() function.  Otherwise, it is up
- *	to the program to supply one.  A good guess is
- *		extern off_t lseek(int, off_t, int);
- */
-#define	HAS_LSEEK_PROTO	/**/
-
-/* Netdb_host_t:
- *	This symbol holds the type used for the 1st argument
- *	to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- *	This symbol holds the type used for the 2nd argument
- *	to gethostbyaddr().
- */
-/* Netdb_name_t:
- *	This symbol holds the type used for the argument to
- *	gethostbyname().
- */
-/* Netdb_net_t:
- *	This symbol holds the type used for the 1st argument to
- *	getnetbyaddr().
- */
-#define Netdb_host_t		char * /**/
-#define Netdb_hlen_t		int /**/
-#define Netdb_name_t		char * /**/
-#define Netdb_net_t		long /**/
-
-/* Select_fd_set_t:
- *	This symbol holds the type used for the 2nd, 3rd, and 4th
- *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
- *	is defined, and 'int *' otherwise.  This is only useful if you
- *	have select(), of course.
- */
-#define Select_fd_set_t 	Perl_fd_set *	/**/
-
-/* Sock_size_t:
- *	This symbol holds the type used for the size argument of
- *	various socket calls (just the base type, not the pointer-to).
- */
-#define Sock_size_t		int /**/
-
-/* HAS_TIME:
- *	This symbol, if defined, indicates that the time() routine exists.
- */
-/* Time_t:
- *	This symbol holds the type returned by time(). It can be long,
- *	or time_t on BSD sites (in which case <sys/types.h> should be
- *	included).
- */
-#define HAS_TIME		/**/
-#define Time_t time_t		/* Time type */
-
-/* HAS_TIMES:
- *	This symbol, if defined, indicates that the times() routine exists.
- *	Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES		/**/
-
-/* Fpos_t:
- *	This symbol holds the type used to declare file positions in libc.
- *	It can be fpos_t, long, uint, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t		/* File position type */
-
-/* Gid_t_f:
- *	This symbol defines the format string used for printing a Gid_t.
- */
-#define	Gid_t_f		"ld"		/**/
-
-/* Gid_t_sign:
- *	This symbol holds the signedess of a Gid_t.
- *	1 for unsigned, -1 for signed.
- */
-#define Gid_t_sign	-1		/* GID sign */
-
-/* Gid_t_size:
- *	This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4		/* GID size */
-
-/* Gid_t:
- *	This symbol holds the return type of getgid() and the type of
- *	argument to setrgid() and related functions.  Typically,
- *	it is the type of group ids in the kernel. It can be int, ushort,
- *	gid_t, etc... It may be necessary to include <sys/types.h> to get
- *	any typedef'ed information.
- */
-#define Gid_t gid_t		/* Type for getgid(), etc... */
-
-/* Off_t:
- *	This symbol holds the type used to declare offsets in the kernel.
- *	It can be int, long, off_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- *	This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t long		/* <offset> type */
-#define LSEEKSIZE 4		/* <offset> size */
-#define Off_t_size 4	/* <offset> size */
-
-/* Mode_t:
- *	This symbol holds the type used to declare file modes
- *	for systems calls.  It is usually mode_t, but may be
- *	int or unsigned short.  It may be necessary to include <sys/types.h>
- *	to get any typedef'ed information.
- */
-#define Mode_t mode_t	 /* file mode parameter for system calls */
-
-/* Pid_t:
- *	This symbol holds the type used to declare process ids in the kernel.
- *	It can be int, uint, pid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t int		/* PID type */
-
-/* Size_t_size:
- *	This symbol holds the size of a Size_t in bytes.
- */
-#define Size_t_size 8		/**/
-
-/* Size_t:
- *	This symbol holds the type used to declare length parameters
- *	for string functions.  It is usually size_t, but may be
- *	unsigned long, int, etc.  It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t	 /* length parameter for string functions */
-
-/* Uid_t_f:
- *	This symbol defines the format string used for printing a Uid_t.
- */
-#define	Uid_t_f		"ld"		/**/
-
-/* Uid_t_sign:
- *	This symbol holds the signedess of a Uid_t.
- *	1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign	-1		/* UID sign */
-
-/* Uid_t_size:
- *	This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4		/* UID size */
-
-/* Uid_t:
- *	This symbol holds the type used to declare user ids in the kernel.
- *	It can be int, ushort, uid_t, etc... It may be necessary to include
- *	<sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t		/* UID type */
-
-#endif
diff --git a/win32/config_h.PL b/win32/config_h.PL
index 7ce39d5e0e..b817c92672 100644
--- a/win32/config_h.PL
+++ b/win32/config_h.PL
@@ -69,6 +69,10 @@ while (<SH>)
    {
      $_ = "/*#define ". $1 . "_EXP \"\"\t/ **/\n";
    }
+  elsif (/^\s*#define\s+CPP(STDIN|RUN)\s+"gcc(.*)"\s*$/)
+   {
+     $_ = "#define CPP" . $1 . " \"" . $opt{ARCHPREFIX} . "gcc" . $2 . "\"\n";
+   }
   print H;
  }
 close(H);
diff --git a/win32/makefile.mk b/win32/makefile.mk
index 0a9560d845..7cd1b42e89 100644
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -694,14 +694,9 @@ UTILS		=			\
 .IF "$(CCTYPE)" == "GCC"
 
 .IF "$(WIN64)" == "define"
-.IF "$(GCCCROSS)" == "define"
 CFGSH_TMPL	= config.gc64
 CFGH_TMPL	= config_H.gc64
 .ELSE
-CFGSH_TMPL	= config.gc64nox
-CFGH_TMPL	= config_H.gc64nox
-.ENDIF
-.ELSE
 CFGSH_TMPL	= config.gc
 CFGH_TMPL	= config_H.gc
 .ENDIF
@@ -908,7 +903,8 @@ CFG_VARS	=					\
 		uselargefiles=$(USE_LARGE_FILES)	~	\
 		usesitecustomize=$(USE_SITECUST)	~	\
 		LINK_FLAGS=$(LINK_FLAGS)	~	\
-		optimize=$(OPTIMIZE)
+		optimize=$(OPTIMIZE)	~	\
+		ARCHPREFIX=$(ARCHPREFIX)
 
 ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
 
@@ -975,15 +971,15 @@ config.w32 : $(CFGSH_TMPL)
 # edit config.gc, then make perl using GCC in a minimal configuration (i.e.
 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
 # this target to regenerate config_H.gc.
-# repeat for config.gc64 and config_H.gc64, and again for config.gc64nox and
-# config_H.gc64nox, if you have suitable build environments, otherwise hand-edit
-# them to maintain the same differences with config.gc and config_H.gc as before.
+# repeat for config.gc64 and config_H.gc64, if you have a suitable build
+# environment, otherwise hand-edit them to maintain the same differences with
+# config.gc and config_H.gc as before.
 regen_config_h:
 	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
 	    $(CFGSH_TMPL) > ..\config.sh
 	$(MINIPERL) -I..\lib ..\configpm --chdir=..
 	-del /f $(CFGH_TMPL)
-	-$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
+	-$(MINIPERL) -I..\lib $(ICWD) config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
 	rename config.h $(CFGH_TMPL)
 
 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
@@ -992,7 +988,7 @@ $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
 	$(XCOPY) ..\*.h $(COREDIR)\*.*
 	$(XCOPY) *.h $(COREDIR)\*.*
 	$(RCOPY) include $(COREDIR)\*.*
-	$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \
+	$(MINIPERL) -I..\lib $(ICWD) config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
 	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
 
 ..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl