Experimenting in DOS arcana.

p4raw-id: //depot/perl@7451

2 files changed, 2449 insertions, 2449 deletions

diff --git a/win32/Makefile b/win32/Makefile
index af119909e8..094f93c212 100644
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -1,1120 +1,1120 @@
-#
-# Makefile to build perl on Windows NT using Microsoft NMAKE.
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl56.dll).  Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration.  Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "nmake install" to put your
-# newly built perl.
-#
-INST_DRV	= c:
-INST_TOP	= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location.  Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to.  If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER	= \5.6.0
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components.  This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files.  Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location.  Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH	= \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters.  This is need for fork()
-# emulation.
-#
-#USE_MULTI	= define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation.  This needs
-# USE_MULTI as well.
-#
-#USE_ITHREADS	= define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl.  This needs USE_MULTI above.  This is also needed to
-# get fork().
-#
-#USE_IMP_SYS	= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities.  This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005.  This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT	= define
-
-#
-# uncomment one of the following lines if you are using either
-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
-#
-#CCTYPE		= MSVC20
-#CCTYPE		= MSVC60
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-#
-#CFG		= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT	= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful.  This option is supported only with
-# Visual C.
-#
-#USE_SETARGV	= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32).  File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC	= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB	= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it.  Be prepared to recompile all
-# extensions if you change the default.  Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC	= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME		= f:\msvc20
-CCHOME		= $(MSVCDIR)
-CCINCDIR	= $(CCHOME)\include
-CCLIBDIR	= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution.  You most
-# probably just want to build modules that won't compile with
-#         perl Makefile.PL POLLUTE=1
-# instead of enabling this.  Please report such modules to the respective
-# authors.
-#
-#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE
-
-#
-# This should normally be disabled.  Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled.  Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS	=
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL		=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT		= undef
-!ELSE
-D_CRYPT		= define
-CRYPT_FLAG	= -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC	= undef
-USE_5005THREADS	= undef
-USE_MULTI	= undef
-USE_IMP_SYS	= define
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC	= undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS	= undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC	= undef
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI	= undef
-!ENDIF
-
-!IF "$(USE_OBJECT)" == ""
-USE_OBJECT	= undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS	= undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI	= define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI	= define
-USE_5005THREADS	= undef
-!ENDIF
-
-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""
-PROCESSOR_ARCHITECTURE	= x86
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-!ELSE
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
-!IF "$(USE_MULTI)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-!ELSE
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
-!ENDIF
-!ENDIF
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == "define"
-ARCHNAME	= $(ARCHNAME)-thread
-!ENDIF
-
-# Visual Studio 98 specific
-!IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand.  Makes the test suite
-# run in about 10% less time.
-DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib 
-
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled.  Anything earlier fails tests.
-!IF "$(CFG)" == ""
-CFG		= Optimize
-!ENDIF
-!ENDIF
-
-ARCHDIR		= ..\lib\$(ARCHNAME)
-COREDIR		= ..\lib\CORE
-AUTODIR		= ..\lib\auto
-LIBDIR		= ..\lib
-EXTDIR		= ..\ext
-PODDIR		= ..\pod
-EXTUTILSDIR	= $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
-INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB	= $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
-INST_COREDIR	= $(INST_ARCHLIB)\CORE
-INST_POD	= $(INST_LIB)\pod
-INST_HTML	= $(INST_POD)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-CC		= cl
-LINK32		= link
-LIB32		= $(LINK32) -lib
-RSC		= rc
-
-#
-# Options
-#
-
-INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 
-DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS		= -DPERLDLL -DPERL_CORE
-SUBSYS		= console
-CXX_FLAG	= -TP -GX
-
-!IF "$(USE_PERLCRT)" != "define"
-LIBC	= msvcrt.lib
-!ELSE
-LIBC	= PerlCRT.lib
-!ENDIF
-
-PERLEXE_RES	=
-PERLDLL_RES	=
-
-!IF  "$(CFG)" == "Debug"
-!  IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
-!  ELSE
-OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
-!  ENDIF
-LINK_DBG	= -debug -pdb:none
-!ELSE
-!  IF  "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE	= -O2 -MD -DNDEBUG
-OPTIMIZE	= -O1 -MD -DNDEBUG
-!  ELSE
-OPTIMIZE	= -Od -MD -DNDEBUG
-!  ENDIF
-LINK_DBG	= -release
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)
-BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT
-!ENDIF
-
-!IF "$(USE_PERLCRT)" != "define"
-BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX
-!ENDIF
-
-LIBBASEFILES	= $(CRYPT_LIB) \
-		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
-		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
-		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
-		version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES	= $(LIBBASEFILES) $(LIBC)
-
-CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-		$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
-		-libpath:"$(INST_COREDIR)" \
-		-machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG	= -Fo
-EXEOUT_FLAG	= -Fe
-
-CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o = .obj
-
-#
-# Rules
-# 
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
-	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
-	$(NOOP)
-
-$(o).dll:
-	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  
-
-.rc.res:
-	$(RSC) -i.. $<
-
-#
-# various targets
-PERLIMPLIB	= ..\perl56.lib
-PERLDLL		= ..\perl56.dll
-
-MINIPERL	= ..\miniperl.exe
-MINIDIR		= .\mini
-PERLEXE		= ..\perl.exe
-WPERLEXE	= ..\wperl.exe
-GLOBEXE		= ..\perlglob.exe
-CONFIGPM	= ..\lib\Config.pm
-MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
-X2P		= ..\x2p\a2p.exe
-
-PL2BAT		= bin\pl2bat.pl
-GLOBBAT		= bin\perlglob.bat
-
-UTILS		=			\
-		..\utils\h2ph		\
-		..\utils\splain		\
-		..\utils\dprofpp	\
-		..\utils\perlbug	\
-		..\utils\pl2pm 		\
-		..\utils\c2ph		\
-		..\utils\h2xs		\
-		..\utils\perldoc	\
-		..\utils\perlcc		\
-		..\pod\checkpods	\
-		..\pod\pod2html		\
-		..\pod\pod2latex	\
-		..\pod\pod2man		\
-		..\pod\pod2text		\
-		..\pod\pod2usage	\
-		..\pod\podchecker	\
-		..\pod\podselect	\
-		..\x2p\find2perl	\
-		..\x2p\s2p		\
-		bin\exetype.pl		\
-		bin\runperl.pl		\
-		bin\pl2bat.pl		\
-		bin\perlglob.pl		\
-		bin\search.pl
-
-MAKE		= nmake -nologo
-
-CFGSH_TMPL	= config.vc
-CFGH_TMPL	= config_H.vc
-
-XCOPY		= xcopy /f /r /i /d
-RCOPY		= xcopy /f /r /i /e /d
-NOOP		= @echo
-NULL		=
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-		-C++ -prototypes
-
-MICROCORE_SRC	=		\
-		..\av.c		\
-		..\deb.c	\
-		..\doio.c	\
-		..\doop.c	\
-		..\dump.c	\
-		..\globals.c	\
-		..\gv.c		\
-		..\hv.c		\
-		..\mg.c		\
-		..\op.c		\
-		..\perl.c	\
-		..\perlapi.c	\
-		..\perly.c	\
-		..\pp.c		\
-		..\pp_ctl.c	\
-		..\pp_hot.c	\
-		..\pp_sys.c	\
-		..\regcomp.c	\
-		..\regexec.c	\
-		..\run.c	\
-		..\scope.c	\
-		..\sv.c		\
-		..\taint.c	\
-		..\toke.c	\
-		..\universal.c	\
-		..\utf8.c	\
-		..\util.c	\
-		..\xsutils.c
-
-EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-!IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
-!ENDIF
-
-WIN32_SRC	=		\
-		.\win32.c	\
-		.\win32sck.c	\
-		.\win32thread.c 
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC		= $(DYNALOADER).c
-
-X2P_SRC		=		\
-		..\x2p\a2p.c	\
-		..\x2p\hash.c	\
-		..\x2p\str.c	\
-		..\x2p\util.c	\
-		..\x2p\walk.c
-
-CORE_NOCFG_H	=		\
-		..\av.h		\
-		..\cop.h	\
-		..\cv.h		\
-		..\dosish.h	\
-		..\embed.h	\
-		..\form.h	\
-		..\gv.h		\
-		..\handy.h	\
-		..\hv.h		\
-		..\iperlsys.h	\
-		..\mg.h		\
-		..\nostdio.h	\
-		..\op.h		\
-		..\opcode.h	\
-		..\perl.h	\
-		..\perlapi.h	\
-		..\perlsdio.h	\
-		..\perlsfio.h	\
-		..\perly.h	\
-		..\pp.h		\
-		..\proto.h	\
-		..\regexp.h	\
-		..\scope.h	\
-		..\sv.h		\
-		..\thread.h	\
-		..\unixish.h	\
-		..\utf8.h	\
-		..\util.h	\
-		..\warnings.h	\
-		..\XSUB.h	\
-		..\EXTERN.h	\
-		..\perlvars.h	\
-		..\intrpvar.h	\
-		..\thrdvar.h	\
-		.\include\dirent.h	\
-		.\include\netdb.h	\
-		.\include\sys\socket.h	\
-		.\win32.h
-
-CORE_H		= $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
-		  $(MINIDIR)\miniperlmain$(o)	\
-		  $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
-MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ		= $(DLL_SRC:.c=.obj)
-X2P_OBJ		= $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ	= $(CORE_OBJ)
-PERLEXE_OBJ	= perlmain$(o)
-
-PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ	= setargv$(o)
-!ENDIF
-
-DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
-		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
-		Sys/Hostname Storable
-STATIC_EXT	= DynaLoader
-NONXS_EXT	= Errno
-
-DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET		= $(EXTDIR)\Socket\Socket
-FCNTL		= $(EXTDIR)\Fcntl\Fcntl
-OPCODE		= $(EXTDIR)\Opcode\Opcode
-SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File
-IO		= $(EXTDIR)\IO\IO
-POSIX		= $(EXTDIR)\POSIX\POSIX
-ATTRS		= $(EXTDIR)\attrs\attrs
-THREAD		= $(EXTDIR)\Thread\Thread
-B		= $(EXTDIR)\B\B
-RE		= $(EXTDIR)\re\re
-DUMPER		= $(EXTDIR)\Data\Dumper\Dumper
-ERRNO		= $(EXTDIR)\Errno\Errno
-PEEK		= $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader
-DPROF		= $(EXTDIR)\Devel\DProf\DProf
-GLOB		= $(EXTDIR)\File\Glob\Glob
-HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE	= $(EXTDIR)\Storable\Storable
-
-SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL		= $(AUTODIR)\IO\IO.dll
-POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll
-B_DLL		= $(AUTODIR)\B\B.dll
-DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL		= $(AUTODIR)\re\re.dll
-BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL	= $(AUTODIR)\Storable\Storable.dll
-
-ERRNO_PM	= $(LIBDIR)\Errno.pm
-
-EXTENSION_C	= 		\
-		$(SOCKET).c	\
-		$(FCNTL).c	\
-		$(OPCODE).c	\
-		$(SDBM_FILE).c	\
-		$(IO).c		\
-		$(POSIX).c	\
-		$(ATTRS).c	\
-		$(THREAD).c	\
-		$(RE).c		\
-		$(DUMPER).c	\
-		$(PEEK).c	\
-		$(B).c		\
-		$(BYTELOADER).c	\
-		$(DPROF).c	\
-		$(GLOB).c	\
-		$(HOSTNAME).c	\
-		$(STORABLE).c
-
-EXTENSION_DLL	= 		\
-		$(SOCKET_DLL)	\
-		$(FCNTL_DLL)	\
-		$(OPCODE_DLL)	\
-		$(SDBM_FILE_DLL)\
-		$(IO_DLL)	\
-		$(POSIX_DLL)	\
-		$(ATTRS_DLL)	\
-		$(DUMPER_DLL)	\
-		$(PEEK_DLL)	\
-		$(B_DLL)	\
-		$(RE_DLL)	\
-		$(THREAD_DLL)	\
-		$(BYTELOADER_DLL)	\
-		$(DPROF_DLL)	\
-		$(GLOB_DLL)	\
-		$(HOSTNAME_DLL)	\
-		$(STORABLE_DLL)
-
-EXTENSION_PM	=		\
-		$(ERRNO_PM)
-
-POD2HTML	= $(PODDIR)\pod2html
-POD2MAN		= $(PODDIR)\pod2man
-POD2LATEX	= $(PODDIR)\pod2latex
-POD2TEXT	= $(PODDIR)\pod2text
-
-CFG_VARS	=					\
-		"INST_DRV=$(INST_DRV)"			\
-		"INST_TOP=$(INST_TOP)"			\
-		"INST_VER=$(INST_VER)"			\
-		"INST_ARCH=$(INST_ARCH)"		\
-		"archname=$(ARCHNAME)"			\
-		"cc=$(CC)"				\
-		"ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
-		"cf_email=$(EMAIL)"			\
-		"d_crypt=$(D_CRYPT)"			\
-		"d_mymalloc=$(PERL_MALLOC)"		\
-		"libs=$(LIBFILES)"			\
-		"incpath=$(CCINCDIR:"=\")"		\
-		"libperl=$(PERLIMPLIB:..\=)"		\
-		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
-		"libc=$(LIBC)"				\
-		"make=nmake"				\
-		"static_ext=$(STATIC_EXT)"		\
-		"dynamic_ext=$(DYNAMIC_EXT)"		\
-		"nonxs_ext=$(NONXS_EXT)"		\
-		"use5005threads=$(USE_5005THREADS)"	\
-		"useithreads=$(USE_ITHREADS)"		\
-		"usethreads=$(USE_5005THREADS)"		\
-		"usemultiplicity=$(USE_MULTI)"		\
-		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
-		"optimize=$(OPTIMIZE:"=\")"
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
-	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#------------------------------------------------------------
-
-$(GLOBEXE) : perlglob$(o)
-	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
-	    perlglob$(o) setargv$(o) 
-
-perlglob$(o)  : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
-	copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL)
-	-del /f config.h
-	copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
-	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
-	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
-	cd ..
-	-del /f perl.exe
-	perl configpm
-	cd win32
-	-del /f $(CFGH_TMPL)
-	-mkdir $(COREDIR)
-	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-	rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
-	cd .. && miniperl configpm
-	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
-	$(XCOPY) ..\*.h $(COREDIR)\*.*
-	$(XCOPY) *.h $(COREDIR)\*.*
-	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
-	$(RCOPY) include $(COREDIR)\*.*
-	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
-	    || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
-	$(LINK32) -subsystem:console -out:$@ @<<
-	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
-<<
-
-$(MINIDIR) :
-	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
-	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
-	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
-perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
-	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-!ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ)	: $(CORE_NOCFG_H)
-
-$(WIN32_OBJ)	: $(CORE_H)
-$(CORE_OBJ)	: $(CORE_H)
-$(DLL_OBJ)	: $(CORE_H)
-$(X2P_OBJ)	: $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
-	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
-	    CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
-		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
-<<
-	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
-	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
-	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
-	$(MINIPERL) ..\x2p\find2perl.PL
-	$(MINIPERL) ..\x2p\s2p.PL
-	$(LINK32) -subsystem:console -out:$@ @<<
-		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
-<<
-
-perlmain.c : runperl.c 
-	copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
-	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
-	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-	copy $(PERLEXE) $(WPERLEXE)
-	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
-	copy splittree.pl .. 
-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
-	if not exist $(AUTODIR) mkdir $(AUTODIR)
-	cd $(EXTDIR)\$(*B)
-	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
-	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
-	cd ..\..\win32
-	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
-	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
-	cd $(EXTDIR)\$(*B)
-	$(XSUBPP) dl_win32.xs > $(*B).c
-	cd ..\..\win32
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
-	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
-	cd $(EXTDIR)\Data\$(*B)
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\..\win32
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
-	cd $(EXTDIR)\Devel\$(*B)
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\..\win32
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
-	cd $(EXTDIR)\File\$(*B)
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\..\win32
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
-	cd $(EXTDIR)\Devel\$(*B)
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\..\win32
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(B_DLL): $(PERLEXE) $(B).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
-	cd $(EXTDIR)\Sys\$(*B)
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\..\win32
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
-	cd $(EXTDIR)\$(*B)
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	$(MAKE)
-	cd ..\..\win32
-
-doc: $(PERLEXE)
-	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
-	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
-	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
-	cd ..\utils
-	$(MAKE) PERL=$(MINIPERL)
-	cd ..\pod
-	copy ..\README.amiga .\perlamiga.pod
-	copy ..\README.cygwin .\perlcygwin.pod
-	copy ..\README.dos .\perldos.pod
-	copy ..\README.hpux .\perlhpux.pod
-	copy ..\README.machten .\perlmachten.pod
-	copy ..\README.os2 .\perlos2.pod
-	copy ..\vms\perlvms.pod .\perlvms.pod
-	copy ..\README.win32 .\perlwin32.pod
-	$(MAKE) -f ..\win32\pod.mak converters
-	cd ..\lib
-	$(PERLEXE) lib_pm.PL
-	cd ..\win32
-	$(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
-	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
-		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-	-del /f *.def *.map
-	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)
-	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-	-del /f $(LIBDIR)\XSLoader.pm
-	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-	-del /f $(LIBDIR)\File\Glob.pm
-	-del /f $(LIBDIR)\Storable.pm
-	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
-	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-	-del /f $(PODDIR)\*.html
-	-del /f $(PODDIR)\*.bat
-	cd ..\utils
-	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
-	-del /f *.bat
-	cd ..\win32
-	cd ..\x2p
-	-del /f find2perl s2p
-	-del /f *.bat
-	cd ..\win32
-	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-	-del /f $(CONFIGPM)
-	-del /f bin\*.bat
-	cd $(EXTDIR)
-	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
-	cd ..\win32
-	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
-	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : utils
-	$(PERLEXE) ..\installperl
-	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
-	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
-	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
-	$(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
-	copy splittree.pl .. 
-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-	$(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
-	$(XCOPY) $(MINIPERL) ..\t\perl.exe
-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-	attrib -r ..\t\*.*
-	copy test ..\t
-	cd ..\t
-	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-	cd ..\win32
-
-test-prep : all utils
-	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
-	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-
-test : test-prep
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-test-notty : test-prep
-	set PERL_SKIP_TTY_TEST=1
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-test-wide : test-prep
-	set HARNESS_PERL_SWITCHES=-C
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-test-wide-notty : test-prep
-	set PERL_SKIP_TTY_TEST=1
-	set HARNESS_PERL_SWITCHES=-C
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-clean : 
-	-@erase miniperlmain$(o)
-	-@erase $(MINIPERL)
-	-@erase perlglob$(o)
-	-@erase perlmain$(o)
-	-@erase config.w32
-	-@erase /f config.h
-	-@erase $(GLOBEXE)
-	-@erase $(PERLEXE)
-	-@erase $(WPERLEXE)
-	-@erase $(PERLDLL)
-	-@erase $(CORE_OBJ)
-	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
-	-@erase $(WIN32_OBJ)
-	-@erase $(DLL_OBJ)
-	-@erase $(X2P_OBJ)
-	-@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
-	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-	-@erase ..\x2p\*.exe ..\x2p\*.bat
-	-@erase *.ilk
-	-@erase *.pdb
- 
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "nmake nok" instead.
-ok: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
- 
-nok: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
- 
-nokfile: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#

+# Makefile to build perl on Windows NT using Microsoft NMAKE.

+#

+# This is set up to build a perl.exe that runs off a shared library

+# (perl56.dll).  Also makes individual DLLs for the XS extensions.

+#

+

+##

+## Make sure you read README.win32 *before* you mess with anything here!

+##

+

+##

+## Build configuration.  Edit the values below to suit your needs.

+##

+

+#

+# Set these to wherever you want "nmake install" to put your

+# newly built perl.

+#

+INST_DRV	= c:

+INST_TOP	= $(INST_DRV)\perl

+

+#

+# Comment this out if you DON'T want your perl installation to be versioned.

+# This means that the new installation will overwrite any files from the

+# old installation at the same INST_TOP location.  Leaving it enabled is

+# the safest route, as perl adds the extra version directory to all the

+# locations it installs files to.  If you disable it, an alternative

+# versioned installation can be obtained by setting INST_TOP above to a

+# path that includes an arbitrary version string.

+#

+INST_VER	= \5.6.0

+

+#

+# Comment this out if you DON'T want your perl installation to have

+# architecture specific components.  This means that architecture-

+# specific files will be installed along with the architecture-neutral

+# files.  Leaving it enabled is safer and more flexible, in case you

+# want to build multiple flavors of perl and install them together in

+# the same location.  Commenting it out gives you a simpler

+# installation that is easier to understand for beginners.

+#

+INST_ARCH	= \$(ARCHNAME)

+

+#

+# uncomment to enable multiple interpreters.  This is need for fork()

+# emulation.

+#

+#USE_MULTI	= define

+

+#

+# Beginnings of interpreter cloning/threads; still very incomplete.

+# This should be enabled to get the fork() emulation.  This needs

+# USE_MULTI as well.

+#

+#USE_ITHREADS	= define

+

+#

+# uncomment to enable the implicit "host" layer for all system calls

+# made by perl.  This needs USE_MULTI above.  This is also needed to

+# get fork().

+#

+#USE_IMP_SYS	= define

+

+#

+# WARNING! This option is deprecated and will eventually go away (enable

+# USE_ITHREADS instead).

+#

+# uncomment to enable threads-capabilities.  This is incompatible with

+# USE_ITHREADS, and is only here for people who may have come to rely

+# on the experimental Thread support that was in 5.005.

+#

+#USE_5005THREADS= define

+

+#

+# WARNING! This option is deprecated and will eventually go away (enable

+# USE_MULTI instead).

+#

+# uncomment next line if you want to use the PERL_OBJECT build option.

+# DO NOT ENABLE unless you have legacy code that relies on the C++

+# CPerlObj class that was available in 5.005.  This cannot be enabled

+# if you ask for USE_5005THREADS above.

+#

+#USE_OBJECT	= define

+

+#

+# uncomment one of the following lines if you are using either

+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)

+#

+#CCTYPE		= MSVC20

+#CCTYPE		= MSVC60

+

+#

+# uncomment next line if you want debug version of perl (big,slow)

+#

+#CFG		= Debug

+

+#

+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.

+# It has patches that fix known bugs in older versions of MSVCRT.DLL.

+# This currently requires VC 5.0 with Service Pack 3 or later.

+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/

+# and follow the directions in the package to install.

+#

+# Not recommended if you have VC 6.x and you're not running Windows 9x.

+#

+#USE_PERLCRT	= define

+

+#

+# uncomment to enable linking with setargv.obj under the Visual C

+# compiler. Setting this options enables perl to expand wildcards in

+# arguments, but it may be harder to use alternate methods like

+# File::DosGlob that are more powerful.  This option is supported only with

+# Visual C.

+#

+#USE_SETARGV	= define

+

+#

+# if you have the source for des_fcrypt(), uncomment this and make sure the

+# file exists (see README.win32).  File should be located in the same

+# directory as this file.

+#

+#CRYPT_SRC	= fcrypt.c

+

+#

+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a

+# library, uncomment this, and make sure the library exists (see README.win32)

+# Specify the full pathname of the library.

+#

+#CRYPT_LIB	= fcrypt.lib

+

+#

+# set this if you wish to use perl's malloc

+# WARNING: Turning this on/off WILL break binary compatibility with extensions

+# you may have compiled with/without it.  Be prepared to recompile all

+# extensions if you change the default.  Currently, this cannot be enabled

+# if you ask for USE_IMP_SYS above.

+#

+#PERL_MALLOC	= define

+

+#

+# set the install locations of the compiler include/libraries

+# Running VCVARS32.BAT is *required* when using Visual C.

+# Some versions of Visual C don't define MSVCDIR in the environment,

+# so you may have to set CCHOME explicitly (spaces in the path name should

+# not be quoted)

+#

+#CCHOME		= f:\msvc20

+CCHOME		= $(MSVCDIR)

+CCINCDIR	= $(CCHOME)\include

+CCLIBDIR	= $(CCHOME)\lib

+

+#

+# Additional compiler flags can be specified here.

+#

+

+#

+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support

+# for old symbols by default, at the expense of extreme pollution.  You most

+# probably just want to build modules that won't compile with

+#         perl Makefile.PL POLLUTE=1

+# instead of enabling this.  Please report such modules to the respective

+# authors.

+#

+#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE

+

+#

+# This should normally be disabled.  Enabling it will disable the File::Glob

+# implementation of CORE::glob.

+#

+#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB

+

+#

+# This should normally be disabled.  Enabling it causes perl to read scripts

+# in text mode (which is the 5.005 behavior) and will break ByteLoader.

+#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS

+

+#

+# specify semicolon-separated list of extra directories that modules will

+# look for libraries (spaces in path names need not be quoted)

+#

+EXTRALIBDIRS	=

+

+#

+# set this to your email address (perl will guess a value from

+# from your loginname and your hostname, which may not be right)

+#

+#EMAIL		=

+

+##

+## Build configuration ends.

+##

+

+##################### CHANGE THESE ONLY IF YOU MUST #####################

+

+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""

+D_CRYPT		= undef

+!ELSE

+D_CRYPT		= define

+CRYPT_FLAG	= -DHAVE_DES_FCRYPT

+!ENDIF

+

+!IF "$(USE_OBJECT)" == "define"

+PERL_MALLOC	= undef

+USE_5005THREADS	= undef

+USE_MULTI	= undef

+USE_IMP_SYS	= define

+!ENDIF

+

+!IF "$(PERL_MALLOC)" == ""

+PERL_MALLOC	= undef

+!ENDIF

+

+!IF "$(USE_5005THREADS)" == ""

+USE_5005THREADS	= undef

+!ENDIF

+

+!IF "$(USE_5005THREADS)" == "define"

+USE_ITHREADS	= undef

+!ENDIF

+

+!IF "$(USE_IMP_SYS)" == "define"

+PERL_MALLOC	= undef

+!ENDIF

+

+!IF "$(USE_MULTI)" == ""

+USE_MULTI	= undef

+!ENDIF

+

+!IF "$(USE_OBJECT)" == ""

+USE_OBJECT	= undef

+!ENDIF

+

+!IF "$(USE_ITHREADS)" == ""

+USE_ITHREADS	= undef

+!ENDIF

+

+!IF "$(USE_IMP_SYS)" == ""

+USE_IMP_SYS	= undef

+!ENDIF

+

+!IF "$(USE_PERLCRT)" == ""

+USE_PERLCRT	= undef

+!ENDIF

+

+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"

+USE_MULTI	= define

+!ENDIF

+

+!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"

+USE_MULTI	= define

+USE_5005THREADS	= undef

+!ENDIF

+

+!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"

+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT

+!ENDIF

+

+!IF "$(USE_IMP_SYS)" != "undef"

+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS

+!ENDIF

+

+!IF "$(PROCESSOR_ARCHITECTURE)" == ""

+PROCESSOR_ARCHITECTURE	= x86

+!ENDIF

+

+!IF "$(USE_OBJECT)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object

+!ELSE

+!IF "$(USE_5005THREADS)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread

+!ELSE

+!IF "$(USE_MULTI)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi

+!ELSE

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)

+!ENDIF

+!ENDIF

+!ENDIF

+

+!IF "$(USE_ITHREADS)" == "define"

+ARCHNAME	= $(ARCHNAME)-thread

+!ENDIF

+

+# Visual Studio 98 specific

+!IF "$(CCTYPE)" == "MSVC60"

+

+# VC 6.0 can load the socket dll on demand.  Makes the test suite

+# run in about 10% less time.

+DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib 

+

+# VC 6.0 seems capable of compiling perl correctly with optimizations

+# enabled.  Anything earlier fails tests.

+!IF "$(CFG)" == ""

+CFG		= Optimize

+!ENDIF

+!ENDIF

+

+ARCHDIR		= ..\lib\$(ARCHNAME)

+COREDIR		= ..\lib\CORE

+AUTODIR		= ..\lib\auto

+LIBDIR		= ..\lib

+EXTDIR		= ..\ext

+PODDIR		= ..\pod

+EXTUTILSDIR	= $(LIBDIR)\ExtUtils

+

+#

+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin

+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)

+INST_LIB	= $(INST_TOP)$(INST_VER)\lib

+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)

+INST_COREDIR	= $(INST_ARCHLIB)\CORE

+INST_POD	= $(INST_LIB)\pod

+INST_HTML	= $(INST_POD)\html

+

+#

+# Programs to compile, build .lib files and link

+#

+

+CC		= cl

+LINK32		= link

+LIB32		= $(LINK32) -lib

+RSC		= rc

+

+#

+# Options

+#

+

+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..

+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 

+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)

+LOCDEFS		= -DPERLDLL -DPERL_CORE

+SUBSYS		= console

+CXX_FLAG	= -TP -GX

+

+!IF "$(USE_PERLCRT)" != "define"

+LIBC	= msvcrt.lib

+!ELSE

+LIBC	= PerlCRT.lib

+!ENDIF

+

+PERLEXE_RES	=

+PERLDLL_RES	=

+

+!IF  "$(CFG)" == "Debug"

+!  IF "$(CCTYPE)" == "MSVC20"

+OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING

+!  ELSE

+OPTIMIZE	= -Od -MD -Zi -DDEBUGGING

+!  ENDIF

+LINK_DBG	= -debug -pdb:none

+!ELSE

+!  IF  "$(CFG)" == "Optimize"

+# -O1 yields smaller code, which turns out to be faster than -O2

+#OPTIMIZE	= -O2 -MD -DNDEBUG

+OPTIMIZE	= -O1 -MD -DNDEBUG

+!  ELSE

+OPTIMIZE	= -Od -MD -DNDEBUG

+!  ENDIF

+LINK_DBG	= -release

+!ENDIF

+

+!IF "$(USE_OBJECT)" == "define"

+OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)

+BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT

+!ENDIF

+

+!IF "$(USE_PERLCRT)" != "define"

+BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX

+!ENDIF

+

+LIBBASEFILES	= $(CRYPT_LIB) \

+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \

+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \

+		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \

+		version.lib odbc32.lib odbccp32.lib

+

+# we add LIBC here, since we may be using PerlCRT.dll

+LIBFILES	= $(LIBBASEFILES) $(LIBC)

+

+CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \

+		$(PCHFLAGS) $(OPTIMIZE)

+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \

+		-libpath:"$(INST_COREDIR)" \

+		-machine:$(PROCESSOR_ARCHITECTURE)

+OBJOUT_FLAG	= -Fo

+EXEOUT_FLAG	= -Fe

+

+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

+

+#################### do not edit below this line #######################

+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

+

+o = .obj

+

+#

+# Rules

+# 

+

+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res

+

+.c$(o):

+	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

+

+.y.c:

+	$(NOOP)

+

+$(o).dll:

+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \

+	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  

+

+.rc.res:

+	$(RSC) -i.. $<

+

+#

+# various targets

+PERLIMPLIB	= ..\perl56.lib

+PERLDLL		= ..\perl56.dll

+

+MINIPERL	= ..\miniperl.exe

+MINIDIR		= .\mini

+PERLEXE		= ..\perl.exe

+WPERLEXE	= ..\wperl.exe

+GLOBEXE		= ..\perlglob.exe

+CONFIGPM	= ..\lib\Config.pm

+MINIMOD		= ..\lib\ExtUtils\Miniperl.pm

+X2P		= ..\x2p\a2p.exe

+

+PL2BAT		= bin\pl2bat.pl

+GLOBBAT		= bin\perlglob.bat

+

+UTILS		=			\

+		..\utils\h2ph		\

+		..\utils\splain		\

+		..\utils\dprofpp	\

+		..\utils\perlbug	\

+		..\utils\pl2pm 		\

+		..\utils\c2ph		\

+		..\utils\h2xs		\

+		..\utils\perldoc	\

+		..\utils\perlcc		\

+		..\pod\checkpods	\

+		..\pod\pod2html		\

+		..\pod\pod2latex	\

+		..\pod\pod2man		\

+		..\pod\pod2text		\

+		..\pod\pod2usage	\

+		..\pod\podchecker	\

+		..\pod\podselect	\

+		..\x2p\find2perl	\

+		..\x2p\s2p		\

+		bin\exetype.pl		\

+		bin\runperl.pl		\

+		bin\pl2bat.pl		\

+		bin\perlglob.pl		\

+		bin\search.pl

+

+MAKE		= nmake -nologo

+

+CFGSH_TMPL	= config.vc

+CFGH_TMPL	= config_H.vc

+

+XCOPY		= xcopy /f /r /i /d

+RCOPY		= xcopy /f /r /i /e /d

+NOOP		= @echo

+NULL		=

+

+#

+# filenames given to xsubpp must have forward slashes (since it puts

+# full pathnames in #line strings)

+XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \

+		-C++ -prototypes

+

+MICROCORE_SRC	=		\

+		..\av.c		\

+		..\deb.c	\

+		..\doio.c	\

+		..\doop.c	\

+		..\dump.c	\

+		..\globals.c	\

+		..\gv.c		\

+		..\hv.c		\

+		..\mg.c		\

+		..\op.c		\

+		..\perl.c	\

+		..\perlapi.c	\

+		..\perly.c	\

+		..\pp.c		\

+		..\pp_ctl.c	\

+		..\pp_hot.c	\

+		..\pp_sys.c	\

+		..\regcomp.c	\

+		..\regexec.c	\

+		..\run.c	\

+		..\scope.c	\

+		..\sv.c		\

+		..\taint.c	\

+		..\toke.c	\

+		..\universal.c	\

+		..\utf8.c	\

+		..\util.c	\

+		..\xsutils.c

+

+EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c

+

+!IF "$(PERL_MALLOC)" == "define"

+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c

+!ENDIF

+

+!IF "$(USE_OBJECT)" != "define"

+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c

+!ENDIF

+

+WIN32_SRC	=		\

+		.\win32.c	\

+		.\win32sck.c	\

+		.\win32thread.c 

+

+!IF "$(CRYPT_SRC)" != ""

+WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)

+!ENDIF

+

+DLL_SRC		= $(DYNALOADER).c

+

+X2P_SRC		=		\

+		..\x2p\a2p.c	\

+		..\x2p\hash.c	\

+		..\x2p\str.c	\

+		..\x2p\util.c	\

+		..\x2p\walk.c

+

+CORE_NOCFG_H	=		\

+		..\av.h		\

+		..\cop.h	\

+		..\cv.h		\

+		..\dosish.h	\

+		..\embed.h	\

+		..\form.h	\

+		..\gv.h		\

+		..\handy.h	\

+		..\hv.h		\

+		..\iperlsys.h	\

+		..\mg.h		\

+		..\nostdio.h	\

+		..\op.h		\

+		..\opcode.h	\

+		..\perl.h	\

+		..\perlapi.h	\

+		..\perlsdio.h	\

+		..\perlsfio.h	\

+		..\perly.h	\

+		..\pp.h		\

+		..\proto.h	\

+		..\regexp.h	\

+		..\scope.h	\

+		..\sv.h		\

+		..\thread.h	\

+		..\unixish.h	\

+		..\utf8.h	\

+		..\util.h	\

+		..\warnings.h	\

+		..\XSUB.h	\

+		..\EXTERN.h	\

+		..\perlvars.h	\

+		..\intrpvar.h	\

+		..\thrdvar.h	\

+		.\include\dirent.h	\

+		.\include\netdb.h	\

+		.\include\sys\socket.h	\

+		.\win32.h

+

+CORE_H		= $(CORE_NOCFG_H) .\config.h

+

+MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)

+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)

+WIN32_OBJ	= $(WIN32_SRC:.c=.obj)

+MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\

+		  $(MINIDIR)\miniperlmain$(o)	\

+		  $(MINIDIR)\perlio$(o)

+MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)

+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)

+DLL_OBJ		= $(DLL_SRC:.c=.obj)

+X2P_OBJ		= $(X2P_SRC:.c=.obj)

+

+PERLDLL_OBJ	= $(CORE_OBJ)

+PERLEXE_OBJ	= perlmain$(o)

+

+PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

+#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

+

+!IF "$(USE_SETARGV)" != ""

+SETARGV_OBJ	= setargv$(o)

+!ENDIF

+

+DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \

+		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \

+		Sys/Hostname Storable

+STATIC_EXT	= DynaLoader

+NONXS_EXT	= Errno

+

+DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader

+SOCKET		= $(EXTDIR)\Socket\Socket

+FCNTL		= $(EXTDIR)\Fcntl\Fcntl

+OPCODE		= $(EXTDIR)\Opcode\Opcode

+SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File

+IO		= $(EXTDIR)\IO\IO

+POSIX		= $(EXTDIR)\POSIX\POSIX

+ATTRS		= $(EXTDIR)\attrs\attrs

+THREAD		= $(EXTDIR)\Thread\Thread

+B		= $(EXTDIR)\B\B

+RE		= $(EXTDIR)\re\re

+DUMPER		= $(EXTDIR)\Data\Dumper\Dumper

+ERRNO		= $(EXTDIR)\Errno\Errno

+PEEK		= $(EXTDIR)\Devel\Peek\Peek

+BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader

+DPROF		= $(EXTDIR)\Devel\DProf\DProf

+GLOB		= $(EXTDIR)\File\Glob\Glob

+HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname

+STORABLE	= $(EXTDIR)\Storable\Storable

+

+SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll

+FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll

+OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll

+SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll

+IO_DLL		= $(AUTODIR)\IO\IO.dll

+POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll

+ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll

+THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll

+B_DLL		= $(AUTODIR)\B\B.dll

+DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll

+PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll

+RE_DLL		= $(AUTODIR)\re\re.dll

+BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll

+DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll

+GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll

+HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll

+STORABLE_DLL	= $(AUTODIR)\Storable\Storable.dll

+

+ERRNO_PM	= $(LIBDIR)\Errno.pm

+

+EXTENSION_C	= 		\

+		$(SOCKET).c	\

+		$(FCNTL).c	\

+		$(OPCODE).c	\

+		$(SDBM_FILE).c	\

+		$(IO).c		\

+		$(POSIX).c	\

+		$(ATTRS).c	\

+		$(THREAD).c	\

+		$(RE).c		\

+		$(DUMPER).c	\

+		$(PEEK).c	\

+		$(B).c		\

+		$(BYTELOADER).c	\

+		$(DPROF).c	\

+		$(GLOB).c	\

+		$(HOSTNAME).c	\

+		$(STORABLE).c

+

+EXTENSION_DLL	= 		\

+		$(SOCKET_DLL)	\

+		$(FCNTL_DLL)	\

+		$(OPCODE_DLL)	\

+		$(SDBM_FILE_DLL)\

+		$(IO_DLL)	\

+		$(POSIX_DLL)	\

+		$(ATTRS_DLL)	\

+		$(DUMPER_DLL)	\

+		$(PEEK_DLL)	\

+		$(B_DLL)	\

+		$(RE_DLL)	\

+		$(THREAD_DLL)	\

+		$(BYTELOADER_DLL)	\

+		$(DPROF_DLL)	\

+		$(GLOB_DLL)	\

+		$(HOSTNAME_DLL)	\

+		$(STORABLE_DLL)

+

+EXTENSION_PM	=		\

+		$(ERRNO_PM)

+

+POD2HTML	= $(PODDIR)\pod2html

+POD2MAN		= $(PODDIR)\pod2man

+POD2LATEX	= $(PODDIR)\pod2latex

+POD2TEXT	= $(PODDIR)\pod2text

+

+CFG_VARS	=					\

+		"INST_DRV=$(INST_DRV)"			\

+		"INST_TOP=$(INST_TOP)"			\

+		"INST_VER=$(INST_VER)"			\

+		"INST_ARCH=$(INST_ARCH)"		\

+		"archname=$(ARCHNAME)"			\

+		"cc=$(CC)"				\

+		"ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\

+		"cf_email=$(EMAIL)"			\

+		"d_crypt=$(D_CRYPT)"			\

+		"d_mymalloc=$(PERL_MALLOC)"		\

+		"libs=$(LIBFILES)"			\

+		"incpath=$(CCINCDIR:"=\")"		\

+		"libperl=$(PERLIMPLIB:..\=)"		\

+		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\

+		"libc=$(LIBC)"				\

+		"make=nmake"				\

+		"static_ext=$(STATIC_EXT)"		\

+		"dynamic_ext=$(DYNAMIC_EXT)"		\

+		"nonxs_ext=$(NONXS_EXT)"		\

+		"use5005threads=$(USE_5005THREADS)"	\

+		"useithreads=$(USE_ITHREADS)"		\

+		"usethreads=$(USE_5005THREADS)"		\

+		"usemultiplicity=$(USE_MULTI)"		\

+		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\

+		"optimize=$(OPTIMIZE:"=\")"

+

+#

+# Top targets

+#

+

+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \

+	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)

+

+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

+

+#------------------------------------------------------------

+

+$(GLOBEXE) : perlglob$(o)

+	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \

+	    perlglob$(o) setargv$(o) 

+

+perlglob$(o)  : perlglob.c

+

+config.w32 : $(CFGSH_TMPL)

+	copy $(CFGSH_TMPL) config.w32

+

+.\config.h : $(CFGH_TMPL)

+	-del /f config.h

+	copy $(CFGH_TMPL) config.h

+

+..\config.sh : config.w32 $(MINIPERL) config_sh.PL

+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh

+

+# this target is for when changes to the main config.sh happen

+# edit config.{b,v,g}c and make this target once for each supported

+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)

+regen_config_h:

+	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh

+	cd ..

+	-del /f perl.exe

+	perl configpm

+	cd win32

+	-del /f $(CFGH_TMPL)

+	-mkdir $(COREDIR)

+	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"

+	rename config.h $(CFGH_TMPL)

+

+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl

+	cd .. && miniperl configpm

+	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)

+	$(XCOPY) ..\*.h $(COREDIR)\*.*

+	$(XCOPY) *.h $(COREDIR)\*.*

+	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*

+	$(RCOPY) include $(COREDIR)\*.*

+	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \

+	    || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)

+

+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)

+	$(LINK32) -subsystem:console -out:$@ @<<

+	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)

+<<

+

+$(MINIDIR) :

+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

+

+$(MINICORE_OBJ) : $(CORE_NOCFG_H)

+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c

+

+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)

+	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c

+

+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c

+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

+!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"

+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h

+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c

+!ENDIF

+

+# 1. we don't want to rebuild miniperl.exe when config.h changes

+# 2. we don't want to rebuild miniperl.exe with non-default config.h

+$(MINI_OBJ)	: $(CORE_NOCFG_H)

+

+$(WIN32_OBJ)	: $(CORE_H)

+$(CORE_OBJ)	: $(CORE_H)

+$(DLL_OBJ)	: $(CORE_H)

+$(X2P_OBJ)	: $(CORE_H)

+

+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl

+	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \

+	    CCTYPE=$(CCTYPE) > perldll.def

+

+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)

+	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<

+		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)

+<<

+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

+

+$(MINIMOD) : $(MINIPERL) ..\minimod.pl

+	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

+

+..\x2p\a2p$(o) : ..\x2p\a2p.c

+	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

+

+..\x2p\hash$(o) : ..\x2p\hash.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

+

+..\x2p\str$(o) : ..\x2p\str.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

+

+..\x2p\util$(o) : ..\x2p\util.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

+

+..\x2p\walk$(o) : ..\x2p\walk.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

+

+$(X2P) : $(MINIPERL) $(X2P_OBJ)

+	$(MINIPERL) ..\x2p\find2perl.PL

+	$(MINIPERL) ..\x2p\s2p.PL

+	$(LINK32) -subsystem:console -out:$@ @<<

+		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)

+<<

+

+perlmain.c : runperl.c 

+	copy runperl.c perlmain.c

+

+perlmain$(o) : perlmain.c

+	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

+

+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)

+	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \

+	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)

+	copy $(PERLEXE) $(WPERLEXE)

+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS

+	copy splittree.pl .. 

+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

+

+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)

+	if not exist $(AUTODIR) mkdir $(AUTODIR)

+	cd $(EXTDIR)\$(*B)

+	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL

+	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL

+	cd ..\..\win32

+	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)

+	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)

+	cd $(EXTDIR)\$(*B)

+	$(XSUBPP) dl_win32.xs > $(*B).c

+	cd ..\..\win32

+

+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs

+	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

+

+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs

+	cd $(EXTDIR)\Data\$(*B)

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\..\win32

+

+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs

+	cd $(EXTDIR)\Devel\$(*B)

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\..\win32

+

+$(GLOB_DLL): $(PERLEXE) $(GLOB).xs

+	cd $(EXTDIR)\File\$(*B)

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\..\win32

+

+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs

+	cd $(EXTDIR)\Devel\$(*B)

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\..\win32

+

+$(RE_DLL): $(PERLEXE) $(RE).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(B_DLL): $(PERLEXE) $(B).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(IO_DLL): $(PERLEXE) $(IO).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs

+	cd $(EXTDIR)\Sys\$(*B)

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\..\win32

+

+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL

+	cd $(EXTDIR)\$(*B)

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	$(MAKE)

+	cd ..\..\win32

+

+doc: $(PERLEXE)

+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \

+	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \

+	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

+

+utils: $(PERLEXE) $(X2P)

+	cd ..\utils

+	$(MAKE) PERL=$(MINIPERL)

+	cd ..\pod

+	copy ..\README.amiga .\perlamiga.pod

+	copy ..\README.cygwin .\perlcygwin.pod

+	copy ..\README.dos .\perldos.pod

+	copy ..\README.hpux .\perlhpux.pod

+	copy ..\README.machten .\perlmachten.pod

+	copy ..\README.os2 .\perlos2.pod

+	copy ..\vms\perlvms.pod .\perlvms.pod

+	copy ..\README.win32 .\perlwin32.pod

+	$(MAKE) -f ..\win32\pod.mak converters

+	cd ..\lib

+	$(PERLEXE) lib_pm.PL

+	cd ..\win32

+	$(PERLEXE) $(PL2BAT) $(UTILS)

+

+distclean: clean

+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \

+		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)

+	-del /f *.def *.map

+	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)

+	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm

+	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs

+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm

+	-del /f $(LIBDIR)\XSLoader.pm

+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm

+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm

+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm

+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm

+	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm

+	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm

+	-del /f $(LIBDIR)\File\Glob.pm

+	-del /f $(LIBDIR)\Storable.pm

+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO

+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread

+	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B

+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data

+	-del /f $(PODDIR)\*.html

+	-del /f $(PODDIR)\*.bat

+	cd ..\utils

+	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp

+	-del /f *.bat

+	cd ..\win32

+	cd ..\x2p

+	-del /f find2perl s2p

+	-del /f *.bat

+	cd ..\win32

+	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new

+	-del /f $(CONFIGPM)

+	-del /f bin\*.bat

+	cd $(EXTDIR)

+	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib

+	cd ..\win32

+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)

+	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)

+

+install : all installbare installhtml

+

+installbare : utils

+	$(PERLEXE) ..\installperl

+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*

+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*

+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

+

+installhtml : doc

+	$(RCOPY) html\*.* $(INST_HTML)\*.*

+

+inst_lib : $(CONFIGPM)

+	copy splittree.pl .. 

+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

+	$(RCOPY) ..\lib $(INST_LIB)\*.*

+

+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils

+	$(XCOPY) $(MINIPERL) ..\t\perl.exe

+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

+	attrib -r ..\t\*.*

+	copy test ..\t

+	cd ..\t

+	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

+	cd ..\win32

+

+test-prep : all utils

+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)

+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)

+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

+

+test : test-prep

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+test-notty : test-prep

+	set PERL_SKIP_TTY_TEST=1

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+test-wide : test-prep

+	set HARNESS_PERL_SWITCHES=-C

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+test-wide-notty : test-prep

+	set PERL_SKIP_TTY_TEST=1

+	set HARNESS_PERL_SWITCHES=-C

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+clean : 

+	-@erase miniperlmain$(o)

+	-@erase $(MINIPERL)

+	-@erase perlglob$(o)

+	-@erase perlmain$(o)

+	-@erase config.w32

+	-@erase /f config.h

+	-@erase $(GLOBEXE)

+	-@erase $(PERLEXE)

+	-@erase $(WPERLEXE)

+	-@erase $(PERLDLL)

+	-@erase $(CORE_OBJ)

+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)

+	-@erase $(WIN32_OBJ)

+	-@erase $(DLL_OBJ)

+	-@erase $(X2P_OBJ)

+	-@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res

+	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat

+	-@erase ..\x2p\*.exe ..\x2p\*.bat

+	-@erase *.ilk

+	-@erase *.pdb

+ 

+# Handy way to run perlbug -ok without having to install and run the

+# installed perlbug. We don't re-run the tests here - we trust the user.

+# Please *don't* use this unless all tests pass.

+# If you want to report test failures, use "nmake nok" instead.

+ok: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

+

+okfile: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

+ 

+nok: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"

+ 

+nokfile: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok

diff --git a/win32/makefile.mk b/win32/makefile.mk
index 86a2bf4bfa..33deee535b 100644
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -1,1329 +1,1329 @@
-#
-# Makefile to build perl on Windows NT using DMAKE.
-# Supported compilers:
-#	Visual C++ 2.0 thro 6.0
-#	Borland C++ 5.02
-#	Mingw32 with gcc-2.95.2 or better  **experimental**
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl56.dll).  Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration.  Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "dmake install" to put your
-# newly built perl.
-#
-INST_DRV	*= c:
-INST_TOP	*= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location.  Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to.  If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER	*= \5.6.0
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components.  This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files.  Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location.  Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH	*= \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters.  This is need for fork()
-# emulation.
-#
-#USE_MULTI	*= define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation.  This needs
-# USE_MULTI as well.
-#
-#USE_ITHREADS	*= define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl.  This needs USE_MULTI above.  This is also needed to
-# get fork().
-#
-#USE_IMP_SYS	*= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities.  This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS	*= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005.  This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT	*= define
-
-#
-# uncomment exactly one of the following
-# 
-# Visual C++ 2.x
-#CCTYPE		*= MSVC20
-# Visual C++ > 2.x and < 6.x
-#CCTYPE		*= MSVC
-# Visual C++ >= 6.x
-#CCTYPE		*= MSVC60
-# Borland 5.02 or later
-#CCTYPE		*= BORLAND
-# mingw32+gcc-2.95.2 or better
-CCTYPE		*= GCC
-
-#
-# uncomment this if you are compiling under Windows 95/98 and command.com
-# (not needed if you're running under 4DOS/NT 6.01 or later)
-#IS_WIN95	*= define
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-# If not enabled, we automatically try to use maximum optimization
-# with all compilers that are known to have a working optimizer.
-#
-#CFG		*= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT	*= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful.  This option is supported only with
-# Visual C.
-#
-#USE_SETARGV	*= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32).  File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC	*= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB	*= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it.  Be prepared to recompile all
-# extensions if you change the default.  Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC	*= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME		*= c:\bc5
-#CCHOME		*= $(MSVCDIR)
-CCHOME		*= c:\gcc-2.95.2-msvcrt
-CCINCDIR	*= $(CCHOME)\include
-CCLIBDIR	*= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution.  You most
-# probably just want to build modules that won't compile with
-#         perl Makefile.PL POLLUTE=1
-# instead of enabling this.  Please report such modules to the respective
-# authors.
-#
-#BUILDOPT	+= -DPERL_POLLUTE
-
-#
-# This should normally be disabled.  Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT	+= -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled.  Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS	*=
-
-#
-# set this to point to cmd.exe (only needed if you use some
-# alternate shell that doesn't grok cmd.exe style commands)
-#
-#SHELL		*= g:\winnt\system32\cmd.exe
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL		*=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT		= undef
-.ELSE
-D_CRYPT		= define
-CRYPT_FLAG	= -DHAVE_DES_FCRYPT
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC	!= undef
-USE_5005THREADS	!= undef
-USE_MULTI	!= undef
-USE_IMP_SYS	!= define
-.ENDIF
-
-PERL_MALLOC	*= undef
-
-USE_5005THREADS	*= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS	!= undef
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC	!= undef
-.ENDIF
-
-USE_MULTI	*= undef
-USE_OBJECT	*= undef
-USE_ITHREADS	*= undef
-USE_IMP_SYS	*= undef
-USE_PERLCRT	*= undef
-
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI	!= define
-.ENDIF
-
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI	!= define
-USE_5005THREADS	!= undef
-.ENDIF
-
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT	+= -DPERL_IMPLICIT_SYS
-.ENDIF
-
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
-
-PROCESSOR_ARCHITECTURE *= x86
-
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-.ELSE
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-
-.IF "$(USE_ITHREADS)" == "define"
-ARCHNAME	!:= $(ARCHNAME)-thread
-.ENDIF
-
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand.  Makes the test suite
-# run in about 10% less time.
-DELAYLOAD	*= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib 
-
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled.  Anything earlier fails tests.
-CFG		*= Optimize
-.ENDIF
-
-ARCHDIR		= ..\lib\$(ARCHNAME)
-COREDIR		= ..\lib\CORE
-AUTODIR		= ..\lib\auto
-LIBDIR		= ..\lib
-EXTDIR		= ..\ext
-PODDIR		= ..\pod
-EXTUTILSDIR	= $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
-INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB	= $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
-INST_COREDIR	= $(INST_ARCHLIB)\CORE
-INST_POD	= $(INST_LIB)\pod
-INST_HTML	= $(INST_POD)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-.USESHELL :
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CC		= bcc32
-LINK32		= tlink32
-LIB32		= tlib /P128
-IMPLIB		= implib -c
-RSC		= rc
-
-#
-# Options
-#
-INCLUDES	= -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS	= -H -Hc -H=c:\temp\bcmoduls.pch 
-DEFINES		= -DWIN32 $(CRYPT_FLAG)
-LOCDEFS		= -DPERLDLL -DPERL_CORE
-SUBSYS		= console
-CXX_FLAG	= -P
-
-LIBC		= cw32mti.lib
-LIBFILES	= $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib
-
-.IF  "$(CFG)" == "Debug"
-OPTIMIZE	= -v -D_RTLDLL -DDEBUGGING
-LINK_DBG	= -v
-.ELSE
-OPTIMIZE	= -O2 -D_RTLDLL
-LINK_DBG	= 
-.ENDIF
-
-CFLAGS		= -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-		$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG	= -o
-EXEOUT_FLAG	= -e
-LIBOUT_FLAG	= 
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CC		= gcc
-LINK32		= gcc
-LIB32		= ar rc
-IMPLIB		= dlltool
-RSC		= rc
-
-o = .o
-a = .a
-
-#
-# Options
-#
-
-INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
-DEFINES		= -DWIN32 $(CRYPT_FLAG)
-LOCDEFS		= -DPERLDLL -DPERL_CORE
-SUBSYS		= console
-CXX_FLAG	= -xc++
-
-LIBC		= -lmsvcrt
-
-# same libs as MSVC
-LIBFILES	= $(CRYPT_LIB) $(LIBC) \
-		  -lmoldname -lkernel32 -luser32 -lgdi32 \
-		  -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-		  -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
-		  -lwinmm -lversion -lodbc32
-
-.IF  "$(CFG)" == "Debug"
-OPTIMIZE	= -g -DDEBUGGING
-LINK_DBG	= -g
-.ELSE
-OPTIMIZE	= -g -O2
-LINK_DBG	= 
-.ENDIF
-
-CFLAGS		= $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG	= -o
-EXEOUT_FLAG	= -o
-LIBOUT_FLAG	= 
-
-# NOTE: we assume that GCC uses MSVCRT.DLL
-BUILDOPT	+= -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-
-.ELSE
-
-CC		= cl
-LINK32		= link
-LIB32		= $(LINK32) -lib
-RSC		= rc
-
-#
-# Options
-#
-
-INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 
-DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS		= -DPERLDLL -DPERL_CORE
-SUBSYS		= console
-CXX_FLAG	= -TP -GX
-
-.IF "$(USE_PERLCRT)" != "define"
-LIBC	= msvcrt.lib
-.ELSE
-LIBC	= PerlCRT.lib
-.ENDIF
-
-PERLEXE_RES	=
-PERLDLL_RES	=
-
-.IF  "$(CFG)" == "Debug"
-.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
-.ELSE
-OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
-.ENDIF
-LINK_DBG	= -debug -pdb:none
-.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE	= -O2 -MD -DNDEBUG
-OPTIMIZE	= -O1 -MD -DNDEBUG
-.ELSE
-OPTIMIZE	= -Od -MD -DNDEBUG
-.ENDIF
-LINK_DBG	= -release
-.ENDIF
-
-LIBBASEFILES	= $(CRYPT_LIB) \
-		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
-		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
-		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
-		version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES	= $(LIBBASEFILES) $(LIBC)
-
-CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-		$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
-		-libpath:"$(INST_COREDIR)" \
-		-machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG	= -Fo
-EXEOUT_FLAG	= -Fe
-LIBOUT_FLAG	= /out:
-
-.IF "$(USE_PERLCRT)" != "define"
-BUILDOPT	+= -DPERL_MSVCRT_READFIX
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE	+= $(CXX_FLAG)
-BUILDOPT	+= -DPERL_OBJECT
-.ENDIF
-
-CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
-
-# used to allow local linking flags that are not propogated into Config.pm,
-# currently unused
-#   -- BKS, 12-12-1999
-PRIV_LINK_FLAGS	*=
-BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o *= .obj
-a *= .lib
-
-LKPRE		= INPUT (
-LKPOST		= )
-
-#
-# Rules
-# 
-
-.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res
-
-.c$(o):
-	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
-	$(NOOP)
-
-$(o).dll:
-.IF "$(CCTYPE)" == "BORLAND"
-	$(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
-	$(IMPLIB) $(*B).lib $@
-.ELIF "$(CCTYPE)" == "GCC"
-	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
-	$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
-.ELSE
-	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-	    -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  
-.ENDIF
-
-.rc.res:
-	$(RSC) -i.. $<
-
-#
-# various targets
-MINIPERL	= ..\miniperl.exe
-MINIDIR		= .\mini
-PERLEXE		= ..\perl.exe
-WPERLEXE	= ..\wperl.exe
-GLOBEXE		= ..\perlglob.exe
-CONFIGPM	= ..\lib\Config.pm
-MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
-X2P		= ..\x2p\a2p.exe
-
-PL2BAT		= bin\pl2bat.pl
-GLOBBAT		= bin\perlglob.bat
-
-UTILS		=			\
-		..\utils\h2ph		\
-		..\utils\splain		\
-		..\utils\dprofpp	\
-		..\utils\perlbug	\
-		..\utils\pl2pm 		\
-		..\utils\c2ph		\
-		..\utils\h2xs		\
-		..\utils\perldoc	\
-		..\utils\perlcc		\
-		..\pod\checkpods	\
-		..\pod\pod2html		\
-		..\pod\pod2latex	\
-		..\pod\pod2man		\
-		..\pod\pod2text		\
-		..\pod\pod2usage	\
-		..\pod\podchecker	\
-		..\pod\podselect	\
-		..\x2p\find2perl	\
-		..\x2p\s2p		\
-		bin\exetype.pl		\
-		bin\runperl.pl		\
-		bin\pl2bat.pl		\
-		bin\perlglob.pl		\
-		bin\search.pl
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CFGSH_TMPL	= config.bc
-CFGH_TMPL	= config_H.bc
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CFGSH_TMPL	= config.gc
-CFGH_TMPL	= config_H.gc
-PERLIMPLIB	= ..\libperl56$(a)
-
-.ELSE
-
-CFGSH_TMPL	= config.vc
-CFGH_TMPL	= config_H.vc
-
-.ENDIF
-
-PERLIMPLIB	*= ..\perl56$(a)
-PERLDLL		= ..\perl56.dll
-
-XCOPY		= xcopy /f /r /i /d
-RCOPY		= xcopy /f /r /i /e /d
-NOOP		= @echo
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-		-C++ -prototypes
-
-MICROCORE_SRC	=		\
-		..\av.c		\
-		..\deb.c	\
-		..\doio.c	\
-		..\doop.c	\
-		..\dump.c	\
-		..\globals.c	\
-		..\gv.c		\
-		..\hv.c		\
-		..\mg.c		\
-		..\op.c		\
-		..\perl.c	\
-		..\perlapi.c	\
-		..\perly.c	\
-		..\pp.c		\
-		..\pp_ctl.c	\
-		..\pp_hot.c	\
-		..\pp_sys.c	\
-		..\regcomp.c	\
-		..\regexec.c	\
-		..\run.c	\
-		..\scope.c	\
-		..\sv.c		\
-		..\taint.c	\
-		..\toke.c	\
-		..\universal.c	\
-		..\utf8.c	\
-		..\util.c	\
-		..\xsutils.c
-
-EXTRACORE_SRC	+= perllib.c
-
-.IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC	+= ..\malloc.c
-.ENDIF
-
-.IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC	+= ..\perlio.c
-.ENDIF
-
-WIN32_SRC	=		\
-		.\win32.c	\
-		.\win32sck.c	\
-		.\win32thread.c 
-
-.IF "$(CRYPT_SRC)" != ""
-WIN32_SRC	+= .\$(CRYPT_SRC)
-.ENDIF
-
-DLL_SRC		= $(DYNALOADER).c
-
-X2P_SRC		=		\
-		..\x2p\a2p.c	\
-		..\x2p\hash.c	\
-		..\x2p\str.c	\
-		..\x2p\util.c	\
-		..\x2p\walk.c
-
-CORE_NOCFG_H	=		\
-		..\av.h		\
-		..\cop.h	\
-		..\cv.h		\
-		..\dosish.h	\
-		..\embed.h	\
-		..\form.h	\
-		..\gv.h		\
-		..\handy.h	\
-		..\hv.h		\
-		..\iperlsys.h	\
-		..\mg.h		\
-		..\nostdio.h	\
-		..\op.h		\
-		..\opcode.h	\
-		..\perl.h	\
-		..\perlapi.h	\
-		..\perlsdio.h	\
-		..\perlsfio.h	\
-		..\perly.h	\
-		..\pp.h		\
-		..\proto.h	\
-		..\regexp.h	\
-		..\scope.h	\
-		..\sv.h		\
-		..\thread.h	\
-		..\unixish.h	\
-		..\utf8.h	\
-		..\util.h	\
-		..\warnings.h	\
-		..\XSUB.h	\
-		..\EXTERN.h	\
-		..\perlvars.h	\
-		..\intrpvar.h	\
-		..\thrdvar.h	\
-		.\include\dirent.h	\
-		.\include\netdb.h	\
-		.\include\sys\socket.h	\
-		.\win32.h
-
-CORE_H		= $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ	= $(MICROCORE_SRC:db:+$(o))
-CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
-WIN32_OBJ	= $(WIN32_SRC:db:+$(o))
-MINICORE_OBJ	= $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
-MINIWIN32_OBJ	= $(MINIDIR)\{$(WIN32_OBJ:f)}
-MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ		= $(DLL_SRC:db:+$(o))
-X2P_OBJ		= $(X2P_SRC:db:+$(o))
-
-PERLDLL_OBJ	= $(CORE_OBJ)
-PERLEXE_OBJ	= perlmain$(o)
-
-PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)
-
-.IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ	= setargv$(o)
-.ENDIF
-
-DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
-		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
-		Sys/Hostname Storable
-STATIC_EXT	= DynaLoader
-NONXS_EXT	= Errno
-
-DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET		= $(EXTDIR)\Socket\Socket
-FCNTL		= $(EXTDIR)\Fcntl\Fcntl
-OPCODE		= $(EXTDIR)\Opcode\Opcode
-SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File
-IO		= $(EXTDIR)\IO\IO
-POSIX		= $(EXTDIR)\POSIX\POSIX
-ATTRS		= $(EXTDIR)\attrs\attrs
-THREAD		= $(EXTDIR)\Thread\Thread
-B		= $(EXTDIR)\B\B
-RE		= $(EXTDIR)\re\re
-DUMPER		= $(EXTDIR)\Data\Dumper\Dumper
-ERRNO		= $(EXTDIR)\Errno\Errno
-PEEK		= $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader
-DPROF		= $(EXTDIR)\Devel\DProf\DProf
-GLOB		= $(EXTDIR)\File\Glob\Glob
-HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE	= $(EXTDIR)\Storable\Storable
-
-SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL		= $(AUTODIR)\IO\IO.dll
-POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll
-B_DLL		= $(AUTODIR)\B\B.dll
-DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL		= $(AUTODIR)\re\re.dll
-BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL	= $(AUTODIR)\Storable\Storable.dll
-
-ERRNO_PM	= $(LIBDIR)\Errno.pm
-
-EXTENSION_C	=		\
-		$(SOCKET).c	\
-		$(FCNTL).c	\
-		$(OPCODE).c	\
-		$(SDBM_FILE).c	\
-		$(IO).c		\
-		$(POSIX).c	\
-		$(ATTRS).c	\
-		$(THREAD).c	\
-		$(RE).c		\
-		$(DUMPER).c	\
-		$(PEEK).c	\
-		$(B).c		\
-		$(BYTELOADER).c	\
-		$(DPROF).c	\
-		$(GLOB).c	\
-		$(HOSTNAME).c	\
-		$(STORABLE).c
-
-EXTENSION_DLL	=		\
-		$(SOCKET_DLL)	\
-		$(FCNTL_DLL)	\
-		$(OPCODE_DLL)	\
-		$(SDBM_FILE_DLL)\
-		$(IO_DLL)	\
-		$(POSIX_DLL)	\
-		$(ATTRS_DLL)	\
-		$(DUMPER_DLL)	\
-		$(PEEK_DLL)	\
-		$(B_DLL)	\
-		$(RE_DLL)	\
-		$(THREAD_DLL)	\
-		$(BYTELOADER_DLL)	\
-		$(DPROF_DLL)	\
-		$(GLOB_DLL)	\
-		$(HOSTNAME_DLL)	\
-		$(STORABLE_DLL)
-
-EXTENSION_PM	=		\
-		$(ERRNO_PM)
-
-POD2HTML	= $(PODDIR)\pod2html
-POD2MAN		= $(PODDIR)\pod2man
-POD2LATEX	= $(PODDIR)\pod2latex
-POD2TEXT	= $(PODDIR)\pod2text
-
-# vars must be separated by "\t+~\t+", since we're using the tempfile
-# version of config_sh.pl (we were overflowing someone's buffer by
-# trying to fit them all on the command line)
-#	-- BKS 10-17-1999
-CFG_VARS	=					\
-		INST_DRV=$(INST_DRV)		~	\
-		INST_TOP=$(INST_TOP:s/\/\\/)	~	\
-		INST_VER=$(INST_VER:s/\/\\/)	~	\
-		INST_ARCH=$(INST_ARCH)		~	\
-		archname=$(ARCHNAME)		~	\
-		cc=$(CC)			~	\
-		ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)	~	\
-		cf_email=$(EMAIL)		~	\
-		d_crypt=$(D_CRYPT)		~	\
-		d_mymalloc=$(PERL_MALLOC)	~	\
-		libs=$(LIBFILES:f)		~	\
-		incpath=$(CCINCDIR:s/\/\\/)	~	\
-		libperl=$(PERLIMPLIB:f)		~	\
-		libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)	~	\
-		libc=$(LIBC)			~	\
-		make=dmake			~	\
-		_o=$(o)	obj_ext=$(o)		~	\
-		_a=$(a)	lib_ext=$(a)		~	\
-		static_ext=$(STATIC_EXT)	~	\
-		dynamic_ext=$(DYNAMIC_EXT)	~	\
-		nonxs_ext=$(NONXS_EXT)		~	\
-		use5005threads=$(USE_5005THREADS)	~	\
-		useithreads=$(USE_ITHREADS)	~	\
-		usethreads=$(USE_5005THREADS)	~	\
-		usemultiplicity=$(USE_MULTI)	~	\
-		LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)		~	\
-		optimize=$(OPTIMIZE)
-
-#
-# set up targets varying between Win95 and WinNT builds
-#
-
-.IF "$(IS_WIN95)" == "define"
-MK2 		= .\makefile.95
-RIGHTMAKE	= __switch_makefiles
-NOOP		= @rem
-.ELSE
-MK2		= __not_needed
-RIGHTMAKE	= __not_needed
-.ENDIF
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)		\
-	$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)	\
-	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#----------------------------------------------------------------
-
-#-------------------- BEGIN Win95 SPECIFIC ----------------------
-
-# this target is a jump-off point for Win95
-#  1. it switches to the Win95-specific makefile if it exists
-#     (__do_switch_makefiles)
-#  2. it prints a message when the Win95-specific one finishes (__done)
-#  3. it then kills this makefile by trying to make __no_such_target
-
-__switch_makefiles: __do_switch_makefiles __done __no_such_target
-
-__do_switch_makefiles:
-.IF "$(NOTFIRST)" != "true"
-	if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
-.ELSE
-	$(NOOP)
-.ENDIF
-
-.IF "$(NOTFIRST)" != "true"
-__done:
-	@echo Build process complete. Ignore any errors after this message.
-	@echo Run "dmake test" to test and "dmake install" to install
-
-.ELSE
-# dummy targets for Win95-specific makefile
-
-__done:
-	$(NOOP)
-
-__no_such_target:
-	$(NOOP)
-
-.ENDIF
-
-# This target is used to generate the new makefile (.\makefile.95) for Win95
-
-.\makefile.95: .\makefile.mk
-	$(MINIPERL) genmk95.pl makefile.mk $(MK2)
-
-#--------------------- END Win95 SPECIFIC ---------------------
-
-# a blank target for when builds don't need to do certain things
-# this target added for Win95 port but used to keep the WinNT port able to 
-# use this file
-__not_needed:
-	$(NOOP)
-
-$(GLOBEXE) : perlglob$(o)
-.IF "$(CCTYPE)" == "BORLAND"
-	$(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
-	    "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
-.ELIF "$(CCTYPE)" == "GCC"
-	$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
-.ELSE
-	$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
-	    perlglob$(o) setargv$(o) 
-.ENDIF
-
-perlglob$(o)  : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
-	copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
-	-del /f config.h
-	copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
-	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
-	    $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
-	perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
-	    $(CFGSH_TMPL) > ..\config.sh
-	-cd .. && del /f perl.exe
-	cd .. && perl configpm
-	-del /f $(CFGH_TMPL)
-	-mkdir $(COREDIR)
-	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-	rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
-	cd .. && miniperl configpm
-	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
-	$(XCOPY) ..\*.h $(COREDIR)\*.*
-	$(XCOPY) *.h $(COREDIR)\*.*
-	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
-	$(RCOPY) include $(COREDIR)\*.*
-	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
-	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
-.IF "$(CCTYPE)" == "BORLAND"
-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
-	    @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
-	$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
-	    $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) 
-.ELSE
-	$(LINK32) -subsystem:console -out:$@ \
-	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
-.ENDIF
-
-$(MINIDIR) :
-	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
-	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
-	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
-# unless the .IF is true), so instead we use a .ELSE with the default.
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-
-perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
-	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-.ELSE
-	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
-.ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ)	: $(CORE_NOCFG_H)
-
-$(WIN32_OBJ)	: $(CORE_H)
-$(CORE_OBJ)	: $(CORE_H)
-$(DLL_OBJ)	: $(CORE_H)
-$(X2P_OBJ)	: $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
-	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
-	$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-.IF "$(CCTYPE)" == "BORLAND"
-	$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
-	    @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
-		$@,\n \
-		$(LIBFILES)\n \
-		perldll.def\n)
-	$(IMPLIB) $*.lib $@
-.ELIF "$(CCTYPE)" == "GCC"
-	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
-	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-	dlltool --output-lib $(PERLIMPLIB) \
-		--dllname $(PERLDLL:b).dll \
-		--def perldll.def \
-		--base-file perl.base \
-		--output-exp perl.exp
-	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
-	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
-		perl.exp $(LKPOST))
-.ELSE
-	$(LINK32) -dll -def:perldll.def -out:$@ \
-	    @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
-	        $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
-.ENDIF
-	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
-	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
-	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
-	$(MINIPERL) ..\x2p\find2perl.PL
-	$(MINIPERL) ..\x2p\s2p.PL
-.IF "$(CCTYPE)" == "BORLAND"
-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
-	    @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
-	$(LINK32) -v -o $@ $(BLINK_FLAGS) \
-	    $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
-	$(LINK32) -subsystem:console -out:$@ \
-	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
-.ENDIF
-
-perlmain.c : runperl.c 
-	copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
-	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
-	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
-	    @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
-	    $(@:s,\,\\),\n \
-	    $(PERLIMPLIB) $(LIBFILES)\n)
-.ELIF "$(CCTYPE)" == "GCC"
-	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \
-	    $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
-.ELSE
-	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
-	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-.ENDIF
-	copy $(PERLEXE) $(WPERLEXE)
-	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
-	copy splittree.pl .. 
-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
-	if not exist $(AUTODIR) mkdir $(AUTODIR)
-	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
-	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
-	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
-	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
-	cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
-	$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
-	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
-	cd $(EXTDIR)\Data\$(*B) && \
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\Data\$(*B) && $(MAKE)
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
-	cd $(EXTDIR)\Devel\$(*B) && \
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
-	cd $(EXTDIR)\File\$(*B) && \
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\File\$(*B) && $(MAKE)
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
-	cd $(EXTDIR)\Devel\$(*B) && \
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(B_DLL): $(PERLEXE) $(B).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
-	cd $(EXTDIR)\Sys\$(*B) && \
-	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\Sys\$(*B) && $(MAKE)
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
-	cd $(EXTDIR)\$(*B) && \
-	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
-	cd $(EXTDIR)\$(*B) && $(MAKE)
-
-doc: $(PERLEXE)
-	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
-	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
-	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
-	cd ..\utils && $(MAKE) PERL=$(MINIPERL)
-	copy ..\README.amiga ..\pod\perlamiga.pod
-	copy ..\README.cygwin ..\pod\perlcygwin.pod
-	copy ..\README.dos ..\pod\perldos.pod
-	copy ..\README.hpux ..\pod\perlhpux.pod
-	copy ..\README.machten ..\pod\perlmachten.pod
-	copy ..\README.os2 ..\pod\perlos2.pod
-	copy ..\README.os2 ..\pod\perlos2.pod
-	copy ..\vms\perlvms.pod ..\pod\perlvms.pod
-	cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
-	cd ..\lib && $(PERLEXE) lib_pm.PL
-	$(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
-	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
-		$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-	-del /f *.def *.map
-	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)
-	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-	-del /f $(LIBDIR)\XSLoader.pm
-	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-	-del /f $(LIBDIR)\File\Glob.pm
-	-del /f $(LIBDIR)\Storable.pm
-	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
-	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-	-del /f $(PODDIR)\*.html
-	-del /f $(PODDIR)\*.bat
-	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
-	    dprofpp *.bat
-	-cd ..\x2p && del /f find2perl s2p *.bat
-	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-	-del /f $(CONFIGPM)
-	-del /f bin\*.bat
-	-cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
-	    pm_to_blib
-	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
-	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : $(RIGHTMAKE) utils
-	$(PERLEXE) ..\installperl
-	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
-	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
-	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
-	$(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
-	copy splittree.pl .. 
-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-	$(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
-	$(XCOPY) $(MINIPERL) ..\t\perl.exe
-.IF "$(CCTYPE)" == "BORLAND"
-	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-	attrib -r ..\t\*.*
-	copy test ..\t
-	cd ..\t && \
-	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-
-test-prep : all utils
-	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
-	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
-	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-
-test : $(RIGHTMAKE) test-prep
-	cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-notty : test-prep
-	set PERL_SKIP_TTY_TEST=1 && \
-	    cd ..\t && $(PERLEXE) -I.\lib harness
-
-test-wide : test-prep
-	set HARNESS_PERL_SWITCHES=-C && \
-	    cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-wide-notty : test-prep
-	set PERL_SKIP_TTY_TEST=1 && \
-	    set HARNESS_PERL_SWITCHES=-C && \
-	    cd ..\t && $(PERLEXE) -I..\lib harness
-
-clean : 
-	-@erase miniperlmain$(o)
-	-@erase $(MINIPERL)
-	-@erase perlglob$(o)
-	-@erase perlmain$(o)
-	-@erase config.w32
-	-@erase /f config.h
-	-@erase $(GLOBEXE)
-	-@erase $(PERLEXE)
-	-@erase $(WPERLEXE)
-	-@erase $(PERLDLL)
-	-@erase $(CORE_OBJ)
-	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
-	-@erase $(WIN32_OBJ)
-	-@erase $(DLL_OBJ)
-	-@erase $(X2P_OBJ)
-	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
-	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-	-@erase ..\x2p\*.exe ..\x2p\*.bat
-	-@erase *.ilk
-	-@erase *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "dmake nok" instead.
-ok: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
- 
-nok: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
- 
-nokfile: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#

+# Makefile to build perl on Windows NT using DMAKE.

+# Supported compilers:

+#	Visual C++ 2.0 thro 6.0

+#	Borland C++ 5.02

+#	Mingw32 with gcc-2.95.2 or better  **experimental**

+#

+# This is set up to build a perl.exe that runs off a shared library

+# (perl56.dll).  Also makes individual DLLs for the XS extensions.

+#

+

+##

+## Make sure you read README.win32 *before* you mess with anything here!

+##

+

+##

+## Build configuration.  Edit the values below to suit your needs.

+##

+

+#

+# Set these to wherever you want "dmake install" to put your

+# newly built perl.

+#

+INST_DRV	*= c:

+INST_TOP	*= $(INST_DRV)\perl

+

+#

+# Comment this out if you DON'T want your perl installation to be versioned.

+# This means that the new installation will overwrite any files from the

+# old installation at the same INST_TOP location.  Leaving it enabled is

+# the safest route, as perl adds the extra version directory to all the

+# locations it installs files to.  If you disable it, an alternative

+# versioned installation can be obtained by setting INST_TOP above to a

+# path that includes an arbitrary version string.

+#

+INST_VER	*= \5.6.0

+

+#

+# Comment this out if you DON'T want your perl installation to have

+# architecture specific components.  This means that architecture-

+# specific files will be installed along with the architecture-neutral

+# files.  Leaving it enabled is safer and more flexible, in case you

+# want to build multiple flavors of perl and install them together in

+# the same location.  Commenting it out gives you a simpler

+# installation that is easier to understand for beginners.

+#

+INST_ARCH	*= \$(ARCHNAME)

+

+#

+# uncomment to enable multiple interpreters.  This is need for fork()

+# emulation.

+#

+#USE_MULTI	*= define

+

+#

+# Beginnings of interpreter cloning/threads; still very incomplete.

+# This should be enabled to get the fork() emulation.  This needs

+# USE_MULTI as well.

+#

+#USE_ITHREADS	*= define

+

+#

+# uncomment to enable the implicit "host" layer for all system calls

+# made by perl.  This needs USE_MULTI above.  This is also needed to

+# get fork().

+#

+#USE_IMP_SYS	*= define

+

+#

+# WARNING! This option is deprecated and will eventually go away (enable

+# USE_ITHREADS instead).

+#

+# uncomment to enable threads-capabilities.  This is incompatible with

+# USE_ITHREADS, and is only here for people who may have come to rely

+# on the experimental Thread support that was in 5.005.

+#

+#USE_5005THREADS	*= define

+

+#

+# WARNING! This option is deprecated and will eventually go away (enable

+# USE_MULTI instead).

+#

+# uncomment next line if you want to use the PERL_OBJECT build option.

+# DO NOT ENABLE unless you have legacy code that relies on the C++

+# CPerlObj class that was available in 5.005.  This cannot be enabled

+# if you ask for USE_5005THREADS above.

+#

+#USE_OBJECT	*= define

+

+#

+# uncomment exactly one of the following

+# 

+# Visual C++ 2.x

+#CCTYPE		*= MSVC20

+# Visual C++ > 2.x and < 6.x

+#CCTYPE		*= MSVC

+# Visual C++ >= 6.x

+#CCTYPE		*= MSVC60

+# Borland 5.02 or later

+#CCTYPE		*= BORLAND

+# mingw32+gcc-2.95.2 or better

+CCTYPE		*= GCC

+

+#

+# uncomment this if you are compiling under Windows 95/98 and command.com

+# (not needed if you're running under 4DOS/NT 6.01 or later)

+#IS_WIN95	*= define

+

+#

+# uncomment next line if you want debug version of perl (big,slow)

+# If not enabled, we automatically try to use maximum optimization

+# with all compilers that are known to have a working optimizer.

+#

+#CFG		*= Debug

+

+#

+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.

+# It has patches that fix known bugs in older versions of MSVCRT.DLL.

+# This currently requires VC 5.0 with Service Pack 3 or later.

+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/

+# and follow the directions in the package to install.

+#

+# Not recommended if you have VC 6.x and you're not running Windows 9x.

+#

+#USE_PERLCRT	*= define

+

+#

+# uncomment to enable linking with setargv.obj under the Visual C

+# compiler. Setting this options enables perl to expand wildcards in

+# arguments, but it may be harder to use alternate methods like

+# File::DosGlob that are more powerful.  This option is supported only with

+# Visual C.

+#

+#USE_SETARGV	*= define

+

+#

+# if you have the source for des_fcrypt(), uncomment this and make sure the

+# file exists (see README.win32).  File should be located in the same

+# directory as this file.

+#

+#CRYPT_SRC	*= fcrypt.c

+

+#

+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a

+# library, uncomment this, and make sure the library exists (see README.win32)

+# Specify the full pathname of the library.

+#

+#CRYPT_LIB	*= fcrypt.lib

+

+#

+# set this if you wish to use perl's malloc

+# WARNING: Turning this on/off WILL break binary compatibility with extensions

+# you may have compiled with/without it.  Be prepared to recompile all

+# extensions if you change the default.  Currently, this cannot be enabled

+# if you ask for USE_IMP_SYS above.

+#

+#PERL_MALLOC	*= define

+

+#

+# set the install locations of the compiler include/libraries

+# Running VCVARS32.BAT is *required* when using Visual C.

+# Some versions of Visual C don't define MSVCDIR in the environment,

+# so you may have to set CCHOME explicitly (spaces in the path name should

+# not be quoted)

+#

+#CCHOME		*= c:\bc5

+#CCHOME		*= $(MSVCDIR)

+CCHOME		*= c:\gcc-2.95.2-msvcrt

+CCINCDIR	*= $(CCHOME)\include

+CCLIBDIR	*= $(CCHOME)\lib

+

+#

+# Additional compiler flags can be specified here.

+#

+

+#

+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support

+# for old symbols by default, at the expense of extreme pollution.  You most

+# probably just want to build modules that won't compile with

+#         perl Makefile.PL POLLUTE=1

+# instead of enabling this.  Please report such modules to the respective

+# authors.

+#

+#BUILDOPT	+= -DPERL_POLLUTE

+

+#

+# This should normally be disabled.  Enabling it will disable the File::Glob

+# implementation of CORE::glob.

+#

+#BUILDOPT	+= -DPERL_EXTERNAL_GLOB

+

+#

+# This should normally be disabled.  Enabling it causes perl to read scripts

+# in text mode (which is the 5.005 behavior) and will break ByteLoader.

+#BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS

+

+#

+# specify semicolon-separated list of extra directories that modules will

+# look for libraries (spaces in path names need not be quoted)

+#

+EXTRALIBDIRS	*=

+

+#

+# set this to point to cmd.exe (only needed if you use some

+# alternate shell that doesn't grok cmd.exe style commands)

+#

+#SHELL		*= g:\winnt\system32\cmd.exe

+

+#

+# set this to your email address (perl will guess a value from

+# from your loginname and your hostname, which may not be right)

+#

+#EMAIL		*=

+

+##

+## Build configuration ends.

+##

+

+##################### CHANGE THESE ONLY IF YOU MUST #####################

+

+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""

+D_CRYPT		= undef

+.ELSE

+D_CRYPT		= define

+CRYPT_FLAG	= -DHAVE_DES_FCRYPT

+.ENDIF

+

+.IF "$(USE_OBJECT)" == "define"

+PERL_MALLOC	!= undef

+USE_5005THREADS	!= undef

+USE_MULTI	!= undef

+USE_IMP_SYS	!= define

+.ENDIF

+

+PERL_MALLOC	*= undef

+

+USE_5005THREADS	*= undef

+

+.IF "$(USE_5005THREADS)" == "define"

+USE_ITHREADS	!= undef

+.ENDIF

+

+.IF "$(USE_IMP_SYS)" == "define"

+PERL_MALLOC	!= undef

+.ENDIF

+

+USE_MULTI	*= undef

+USE_OBJECT	*= undef

+USE_ITHREADS	*= undef

+USE_IMP_SYS	*= undef

+USE_PERLCRT	*= undef

+

+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"

+USE_MULTI	!= define

+.ENDIF

+

+.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"

+USE_MULTI	!= define

+USE_5005THREADS	!= undef

+.ENDIF

+

+.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"

+BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT

+.ENDIF

+

+.IF "$(USE_IMP_SYS)" != "undef"

+BUILDOPT	+= -DPERL_IMPLICIT_SYS

+.ENDIF

+

+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE

+

+PROCESSOR_ARCHITECTURE *= x86

+

+.IF "$(USE_OBJECT)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object

+.ELIF "$(USE_5005THREADS)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread

+.ELIF "$(USE_MULTI)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi

+.ELSE

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)

+.ENDIF

+

+.IF "$(USE_ITHREADS)" == "define"

+ARCHNAME	!:= $(ARCHNAME)-thread

+.ENDIF

+

+# Visual Studio 98 specific

+.IF "$(CCTYPE)" == "MSVC60"

+

+# VC 6.0 can load the socket dll on demand.  Makes the test suite

+# run in about 10% less time.

+DELAYLOAD	*= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib 

+

+# VC 6.0 seems capable of compiling perl correctly with optimizations

+# enabled.  Anything earlier fails tests.

+CFG		*= Optimize

+.ENDIF

+

+ARCHDIR		= ..\lib\$(ARCHNAME)

+COREDIR		= ..\lib\CORE

+AUTODIR		= ..\lib\auto

+LIBDIR		= ..\lib

+EXTDIR		= ..\ext

+PODDIR		= ..\pod

+EXTUTILSDIR	= $(LIBDIR)\ExtUtils

+

+#

+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin

+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)

+INST_LIB	= $(INST_TOP)$(INST_VER)\lib

+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)

+INST_COREDIR	= $(INST_ARCHLIB)\CORE

+INST_POD	= $(INST_LIB)\pod

+INST_HTML	= $(INST_POD)\html

+

+#

+# Programs to compile, build .lib files and link

+#

+

+.USESHELL :

+

+.IF "$(CCTYPE)" == "BORLAND"

+

+CC		= bcc32

+LINK32		= tlink32

+LIB32		= tlib /P128

+IMPLIB		= implib -c

+RSC		= rc

+

+#

+# Options

+#

+INCLUDES	= -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"

+#PCHFLAGS	= -H -Hc -H=c:\temp\bcmoduls.pch 

+DEFINES		= -DWIN32 $(CRYPT_FLAG)

+LOCDEFS		= -DPERLDLL -DPERL_CORE

+SUBSYS		= console

+CXX_FLAG	= -P

+

+LIBC		= cw32mti.lib

+LIBFILES	= $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib

+

+.IF  "$(CFG)" == "Debug"

+OPTIMIZE	= -v -D_RTLDLL -DDEBUGGING

+LINK_DBG	= -v

+.ELSE

+OPTIMIZE	= -O2 -D_RTLDLL

+LINK_DBG	= 

+.ENDIF

+

+CFLAGS		= -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \

+		$(PCHFLAGS) $(OPTIMIZE)

+LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"

+OBJOUT_FLAG	= -o

+EXEOUT_FLAG	= -e

+LIBOUT_FLAG	= 

+

+.ELIF "$(CCTYPE)" == "GCC"

+

+CC		= gcc

+LINK32		= gcc

+LIB32		= ar rc

+IMPLIB		= dlltool

+RSC		= rc

+

+o = .o

+a = .a

+

+#

+# Options

+#

+

+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..

+DEFINES		= -DWIN32 $(CRYPT_FLAG)

+LOCDEFS		= -DPERLDLL -DPERL_CORE

+SUBSYS		= console

+CXX_FLAG	= -xc++

+

+LIBC		= -lmsvcrt

+

+# same libs as MSVC

+LIBFILES	= $(CRYPT_LIB) $(LIBC) \

+		  -lmoldname -lkernel32 -luser32 -lgdi32 \

+		  -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \

+		  -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \

+		  -lwinmm -lversion -lodbc32

+

+.IF  "$(CFG)" == "Debug"

+OPTIMIZE	= -g -DDEBUGGING

+LINK_DBG	= -g

+.ELSE

+OPTIMIZE	= -g -O2

+LINK_DBG	= 

+.ENDIF

+

+CFLAGS		= $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)

+LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"

+OBJOUT_FLAG	= -o

+EXEOUT_FLAG	= -o

+LIBOUT_FLAG	= 

+

+# NOTE: we assume that GCC uses MSVCRT.DLL

+BUILDOPT	+= -fno-strict-aliasing -DPERL_MSVCRT_READFIX

+

+.ELSE

+

+CC		= cl

+LINK32		= link

+LIB32		= $(LINK32) -lib

+RSC		= rc

+

+#

+# Options

+#

+

+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..

+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 

+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)

+LOCDEFS		= -DPERLDLL -DPERL_CORE

+SUBSYS		= console

+CXX_FLAG	= -TP -GX

+

+.IF "$(USE_PERLCRT)" != "define"

+LIBC	= msvcrt.lib

+.ELSE

+LIBC	= PerlCRT.lib

+.ENDIF

+

+PERLEXE_RES	=

+PERLDLL_RES	=

+

+.IF  "$(CFG)" == "Debug"

+.IF "$(CCTYPE)" == "MSVC20"

+OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING

+.ELSE

+OPTIMIZE	= -Od -MD -Zi -DDEBUGGING

+.ENDIF

+LINK_DBG	= -debug -pdb:none

+.ELSE

+.IF "$(CFG)" == "Optimize"

+# -O1 yields smaller code, which turns out to be faster than -O2

+#OPTIMIZE	= -O2 -MD -DNDEBUG

+OPTIMIZE	= -O1 -MD -DNDEBUG

+.ELSE

+OPTIMIZE	= -Od -MD -DNDEBUG

+.ENDIF

+LINK_DBG	= -release

+.ENDIF

+

+LIBBASEFILES	= $(CRYPT_LIB) \

+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \

+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \

+		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \

+		version.lib odbc32.lib odbccp32.lib

+

+# we add LIBC here, since we may be using PerlCRT.dll

+LIBFILES	= $(LIBBASEFILES) $(LIBC)

+

+CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \

+		$(PCHFLAGS) $(OPTIMIZE)

+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \

+		-libpath:"$(INST_COREDIR)" \

+		-machine:$(PROCESSOR_ARCHITECTURE)

+OBJOUT_FLAG	= -Fo

+EXEOUT_FLAG	= -Fe

+LIBOUT_FLAG	= /out:

+

+.IF "$(USE_PERLCRT)" != "define"

+BUILDOPT	+= -DPERL_MSVCRT_READFIX

+.ENDIF

+

+.ENDIF

+

+.IF "$(USE_OBJECT)" == "define"

+OPTIMIZE	+= $(CXX_FLAG)

+BUILDOPT	+= -DPERL_OBJECT

+.ENDIF

+

+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

+

+# used to allow local linking flags that are not propogated into Config.pm,

+# currently unused

+#   -- BKS, 12-12-1999

+PRIV_LINK_FLAGS	*=

+BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)

+

+#################### do not edit below this line #######################

+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

+

+o *= .obj

+a *= .lib

+

+LKPRE		= INPUT (

+LKPOST		= )

+

+#

+# Rules

+# 

+

+.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res

+

+.c$(o):

+	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

+

+.y.c:

+	$(NOOP)

+

+$(o).dll:

+.IF "$(CCTYPE)" == "BORLAND"

+	$(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def

+	$(IMPLIB) $(*B).lib $@

+.ELIF "$(CCTYPE)" == "GCC"

+	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)

+	$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@

+.ELSE

+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \

+	    -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  

+.ENDIF

+

+.rc.res:

+	$(RSC) -i.. $<

+

+#

+# various targets

+MINIPERL	= ..\miniperl.exe

+MINIDIR		= .\mini

+PERLEXE		= ..\perl.exe

+WPERLEXE	= ..\wperl.exe

+GLOBEXE		= ..\perlglob.exe

+CONFIGPM	= ..\lib\Config.pm

+MINIMOD		= ..\lib\ExtUtils\Miniperl.pm

+X2P		= ..\x2p\a2p.exe

+

+PL2BAT		= bin\pl2bat.pl

+GLOBBAT		= bin\perlglob.bat

+

+UTILS		=			\

+		..\utils\h2ph		\

+		..\utils\splain		\

+		..\utils\dprofpp	\

+		..\utils\perlbug	\

+		..\utils\pl2pm 		\

+		..\utils\c2ph		\

+		..\utils\h2xs		\

+		..\utils\perldoc	\

+		..\utils\perlcc		\

+		..\pod\checkpods	\

+		..\pod\pod2html		\

+		..\pod\pod2latex	\

+		..\pod\pod2man		\

+		..\pod\pod2text		\

+		..\pod\pod2usage	\

+		..\pod\podchecker	\

+		..\pod\podselect	\

+		..\x2p\find2perl	\

+		..\x2p\s2p		\

+		bin\exetype.pl		\

+		bin\runperl.pl		\

+		bin\pl2bat.pl		\

+		bin\perlglob.pl		\

+		bin\search.pl

+

+.IF "$(CCTYPE)" == "BORLAND"

+

+CFGSH_TMPL	= config.bc

+CFGH_TMPL	= config_H.bc

+

+.ELIF "$(CCTYPE)" == "GCC"

+

+CFGSH_TMPL	= config.gc

+CFGH_TMPL	= config_H.gc

+PERLIMPLIB	= ..\libperl56$(a)

+

+.ELSE

+

+CFGSH_TMPL	= config.vc

+CFGH_TMPL	= config_H.vc

+

+.ENDIF

+

+PERLIMPLIB	*= ..\perl56$(a)

+PERLDLL		= ..\perl56.dll

+

+XCOPY		= xcopy /f /r /i /d

+RCOPY		= xcopy /f /r /i /e /d

+NOOP		= @echo

+

+#

+# filenames given to xsubpp must have forward slashes (since it puts

+# full pathnames in #line strings)

+XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \

+		-C++ -prototypes

+

+MICROCORE_SRC	=		\

+		..\av.c		\

+		..\deb.c	\

+		..\doio.c	\

+		..\doop.c	\

+		..\dump.c	\

+		..\globals.c	\

+		..\gv.c		\

+		..\hv.c		\

+		..\mg.c		\

+		..\op.c		\

+		..\perl.c	\

+		..\perlapi.c	\

+		..\perly.c	\

+		..\pp.c		\

+		..\pp_ctl.c	\

+		..\pp_hot.c	\

+		..\pp_sys.c	\

+		..\regcomp.c	\

+		..\regexec.c	\

+		..\run.c	\

+		..\scope.c	\

+		..\sv.c		\

+		..\taint.c	\

+		..\toke.c	\

+		..\universal.c	\

+		..\utf8.c	\

+		..\util.c	\

+		..\xsutils.c

+

+EXTRACORE_SRC	+= perllib.c

+

+.IF "$(PERL_MALLOC)" == "define"

+EXTRACORE_SRC	+= ..\malloc.c

+.ENDIF

+

+.IF "$(USE_OBJECT)" != "define"

+EXTRACORE_SRC	+= ..\perlio.c

+.ENDIF

+

+WIN32_SRC	=		\

+		.\win32.c	\

+		.\win32sck.c	\

+		.\win32thread.c 

+

+.IF "$(CRYPT_SRC)" != ""

+WIN32_SRC	+= .\$(CRYPT_SRC)

+.ENDIF

+

+DLL_SRC		= $(DYNALOADER).c

+

+X2P_SRC		=		\

+		..\x2p\a2p.c	\

+		..\x2p\hash.c	\

+		..\x2p\str.c	\

+		..\x2p\util.c	\

+		..\x2p\walk.c

+

+CORE_NOCFG_H	=		\

+		..\av.h		\

+		..\cop.h	\

+		..\cv.h		\

+		..\dosish.h	\

+		..\embed.h	\

+		..\form.h	\

+		..\gv.h		\

+		..\handy.h	\

+		..\hv.h		\

+		..\iperlsys.h	\

+		..\mg.h		\

+		..\nostdio.h	\

+		..\op.h		\

+		..\opcode.h	\

+		..\perl.h	\

+		..\perlapi.h	\

+		..\perlsdio.h	\

+		..\perlsfio.h	\

+		..\perly.h	\

+		..\pp.h		\

+		..\proto.h	\

+		..\regexp.h	\

+		..\scope.h	\

+		..\sv.h		\

+		..\thread.h	\

+		..\unixish.h	\

+		..\utf8.h	\

+		..\util.h	\

+		..\warnings.h	\

+		..\XSUB.h	\

+		..\EXTERN.h	\

+		..\perlvars.h	\

+		..\intrpvar.h	\

+		..\thrdvar.h	\

+		.\include\dirent.h	\

+		.\include\netdb.h	\

+		.\include\sys\socket.h	\

+		.\win32.h

+

+CORE_H		= $(CORE_NOCFG_H) .\config.h

+

+MICROCORE_OBJ	= $(MICROCORE_SRC:db:+$(o))

+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))

+WIN32_OBJ	= $(WIN32_SRC:db:+$(o))

+MINICORE_OBJ	= $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}

+MINIWIN32_OBJ	= $(MINIDIR)\{$(WIN32_OBJ:f)}

+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)

+DLL_OBJ		= $(DLL_SRC:db:+$(o))

+X2P_OBJ		= $(X2P_SRC:db:+$(o))

+

+PERLDLL_OBJ	= $(CORE_OBJ)

+PERLEXE_OBJ	= perlmain$(o)

+

+PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)

+

+.IF "$(USE_SETARGV)" != ""

+SETARGV_OBJ	= setargv$(o)

+.ENDIF

+

+DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \

+		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \

+		Sys/Hostname Storable

+STATIC_EXT	= DynaLoader

+NONXS_EXT	= Errno

+

+DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader

+SOCKET		= $(EXTDIR)\Socket\Socket

+FCNTL		= $(EXTDIR)\Fcntl\Fcntl

+OPCODE		= $(EXTDIR)\Opcode\Opcode

+SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File

+IO		= $(EXTDIR)\IO\IO

+POSIX		= $(EXTDIR)\POSIX\POSIX

+ATTRS		= $(EXTDIR)\attrs\attrs

+THREAD		= $(EXTDIR)\Thread\Thread

+B		= $(EXTDIR)\B\B

+RE		= $(EXTDIR)\re\re

+DUMPER		= $(EXTDIR)\Data\Dumper\Dumper

+ERRNO		= $(EXTDIR)\Errno\Errno

+PEEK		= $(EXTDIR)\Devel\Peek\Peek

+BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader

+DPROF		= $(EXTDIR)\Devel\DProf\DProf

+GLOB		= $(EXTDIR)\File\Glob\Glob

+HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname

+STORABLE	= $(EXTDIR)\Storable\Storable

+

+SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll

+FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll

+OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll

+SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll

+IO_DLL		= $(AUTODIR)\IO\IO.dll

+POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll

+ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll

+THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll

+B_DLL		= $(AUTODIR)\B\B.dll

+DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll

+PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll

+RE_DLL		= $(AUTODIR)\re\re.dll

+BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll

+DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll

+GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll

+HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll

+STORABLE_DLL	= $(AUTODIR)\Storable\Storable.dll

+

+ERRNO_PM	= $(LIBDIR)\Errno.pm

+

+EXTENSION_C	=		\

+		$(SOCKET).c	\

+		$(FCNTL).c	\

+		$(OPCODE).c	\

+		$(SDBM_FILE).c	\

+		$(IO).c		\

+		$(POSIX).c	\

+		$(ATTRS).c	\

+		$(THREAD).c	\

+		$(RE).c		\

+		$(DUMPER).c	\

+		$(PEEK).c	\

+		$(B).c		\

+		$(BYTELOADER).c	\

+		$(DPROF).c	\

+		$(GLOB).c	\

+		$(HOSTNAME).c	\

+		$(STORABLE).c

+

+EXTENSION_DLL	=		\

+		$(SOCKET_DLL)	\

+		$(FCNTL_DLL)	\

+		$(OPCODE_DLL)	\

+		$(SDBM_FILE_DLL)\

+		$(IO_DLL)	\

+		$(POSIX_DLL)	\

+		$(ATTRS_DLL)	\

+		$(DUMPER_DLL)	\

+		$(PEEK_DLL)	\

+		$(B_DLL)	\

+		$(RE_DLL)	\

+		$(THREAD_DLL)	\

+		$(BYTELOADER_DLL)	\

+		$(DPROF_DLL)	\

+		$(GLOB_DLL)	\

+		$(HOSTNAME_DLL)	\

+		$(STORABLE_DLL)

+

+EXTENSION_PM	=		\

+		$(ERRNO_PM)

+

+POD2HTML	= $(PODDIR)\pod2html

+POD2MAN		= $(PODDIR)\pod2man

+POD2LATEX	= $(PODDIR)\pod2latex

+POD2TEXT	= $(PODDIR)\pod2text

+

+# vars must be separated by "\t+~\t+", since we're using the tempfile

+# version of config_sh.pl (we were overflowing someone's buffer by

+# trying to fit them all on the command line)

+#	-- BKS 10-17-1999

+CFG_VARS	=					\

+		INST_DRV=$(INST_DRV)		~	\

+		INST_TOP=$(INST_TOP:s/\/\\/)	~	\

+		INST_VER=$(INST_VER:s/\/\\/)	~	\

+		INST_ARCH=$(INST_ARCH)		~	\

+		archname=$(ARCHNAME)		~	\

+		cc=$(CC)			~	\

+		ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)	~	\

+		cf_email=$(EMAIL)		~	\

+		d_crypt=$(D_CRYPT)		~	\

+		d_mymalloc=$(PERL_MALLOC)	~	\

+		libs=$(LIBFILES:f)		~	\

+		incpath=$(CCINCDIR:s/\/\\/)	~	\

+		libperl=$(PERLIMPLIB:f)		~	\

+		libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)	~	\

+		libc=$(LIBC)			~	\

+		make=dmake			~	\

+		_o=$(o)	obj_ext=$(o)		~	\

+		_a=$(a)	lib_ext=$(a)		~	\

+		static_ext=$(STATIC_EXT)	~	\

+		dynamic_ext=$(DYNAMIC_EXT)	~	\

+		nonxs_ext=$(NONXS_EXT)		~	\

+		use5005threads=$(USE_5005THREADS)	~	\

+		useithreads=$(USE_ITHREADS)	~	\

+		usethreads=$(USE_5005THREADS)	~	\

+		usemultiplicity=$(USE_MULTI)	~	\

+		LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)		~	\

+		optimize=$(OPTIMIZE)

+

+#

+# set up targets varying between Win95 and WinNT builds

+#

+

+.IF "$(IS_WIN95)" == "define"

+MK2 		= .\makefile.95

+RIGHTMAKE	= __switch_makefiles

+NOOP		= @rem

+.ELSE

+MK2		= __not_needed

+RIGHTMAKE	= __not_needed

+.ENDIF

+

+#

+# Top targets

+#

+

+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)		\

+	$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)	\

+	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)

+

+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

+

+#----------------------------------------------------------------

+

+#-------------------- BEGIN Win95 SPECIFIC ----------------------

+

+# this target is a jump-off point for Win95

+#  1. it switches to the Win95-specific makefile if it exists

+#     (__do_switch_makefiles)

+#  2. it prints a message when the Win95-specific one finishes (__done)

+#  3. it then kills this makefile by trying to make __no_such_target

+

+__switch_makefiles: __do_switch_makefiles __done __no_such_target

+

+__do_switch_makefiles:

+.IF "$(NOTFIRST)" != "true"

+	if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true

+.ELSE

+	$(NOOP)

+.ENDIF

+

+.IF "$(NOTFIRST)" != "true"

+__done:

+	@echo Build process complete. Ignore any errors after this message.

+	@echo Run "dmake test" to test and "dmake install" to install

+

+.ELSE

+# dummy targets for Win95-specific makefile

+

+__done:

+	$(NOOP)

+

+__no_such_target:

+	$(NOOP)

+

+.ENDIF

+

+# This target is used to generate the new makefile (.\makefile.95) for Win95

+

+.\makefile.95: .\makefile.mk

+	$(MINIPERL) genmk95.pl makefile.mk $(MK2)

+

+#--------------------- END Win95 SPECIFIC ---------------------

+

+# a blank target for when builds don't need to do certain things

+# this target added for Win95 port but used to keep the WinNT port able to 

+# use this file

+__not_needed:

+	$(NOOP)

+

+$(GLOBEXE) : perlglob$(o)

+.IF "$(CCTYPE)" == "BORLAND"

+	$(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c

+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \

+	    "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,

+.ELIF "$(CCTYPE)" == "GCC"

+	$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)

+.ELSE

+	$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \

+	    perlglob$(o) setargv$(o) 

+.ENDIF

+

+perlglob$(o)  : perlglob.c

+

+config.w32 : $(CFGSH_TMPL)

+	copy $(CFGSH_TMPL) config.w32

+

+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)

+	-del /f config.h

+	copy $(CFGH_TMPL) config.h

+

+..\config.sh : config.w32 $(MINIPERL) config_sh.PL

+	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \

+	    $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh

+

+# this target is for when changes to the main config.sh happen

+# edit config.{b,v,g}c and make this target once for each supported

+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)

+regen_config_h:

+	perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \

+	    $(CFGSH_TMPL) > ..\config.sh

+	-cd .. && del /f perl.exe

+	cd .. && perl configpm

+	-del /f $(CFGH_TMPL)

+	-mkdir $(COREDIR)

+	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"

+	rename config.h $(CFGH_TMPL)

+

+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl

+	cd .. && miniperl configpm

+	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)

+	$(XCOPY) ..\*.h $(COREDIR)\*.*

+	$(XCOPY) *.h $(COREDIR)\*.*

+	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*

+	$(RCOPY) include $(COREDIR)\*.*

+	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \

+	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)

+

+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)

+.IF "$(CCTYPE)" == "BORLAND"

+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \

+	    @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)

+.ELIF "$(CCTYPE)" == "GCC"

+	$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \

+	    $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) 

+.ELSE

+	$(LINK32) -subsystem:console -out:$@ \

+	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))

+.ENDIF

+

+$(MINIDIR) :

+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

+

+$(MINICORE_OBJ) : $(CORE_NOCFG_H)

+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c

+

+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)

+	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c

+

+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c

+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless

+# unless the .IF is true), so instead we use a .ELSE with the default.

+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

+

+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h

+.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"

+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c

+.ELSE

+	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c

+.ENDIF

+

+# 1. we don't want to rebuild miniperl.exe when config.h changes

+# 2. we don't want to rebuild miniperl.exe with non-default config.h

+$(MINI_OBJ)	: $(CORE_NOCFG_H)

+

+$(WIN32_OBJ)	: $(CORE_H)

+$(CORE_OBJ)	: $(CORE_H)

+$(DLL_OBJ)	: $(CORE_H)

+$(X2P_OBJ)	: $(CORE_H)

+

+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl

+	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \

+	$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def

+

+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)

+.IF "$(CCTYPE)" == "BORLAND"

+	$(LINK32) -Tpd -ap $(BLINK_FLAGS) \

+	    @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \

+		$@,\n \

+		$(LIBFILES)\n \

+		perldll.def\n)

+	$(IMPLIB) $*.lib $@

+.ELIF "$(CCTYPE)" == "GCC"

+	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \

+	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))

+	dlltool --output-lib $(PERLIMPLIB) \

+		--dllname $(PERLDLL:b).dll \

+		--def perldll.def \

+		--base-file perl.base \

+		--output-exp perl.exp

+	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \

+	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \

+		perl.exp $(LKPOST))

+.ELSE

+	$(LINK32) -dll -def:perldll.def -out:$@ \

+	    @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \

+	        $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))

+.ENDIF

+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

+

+$(MINIMOD) : $(MINIPERL) ..\minimod.pl

+	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

+

+..\x2p\a2p$(o) : ..\x2p\a2p.c

+	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

+

+..\x2p\hash$(o) : ..\x2p\hash.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

+

+..\x2p\str$(o) : ..\x2p\str.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

+

+..\x2p\util$(o) : ..\x2p\util.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

+

+..\x2p\walk$(o) : ..\x2p\walk.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

+

+$(X2P) : $(MINIPERL) $(X2P_OBJ)

+	$(MINIPERL) ..\x2p\find2perl.PL

+	$(MINIPERL) ..\x2p\s2p.PL

+.IF "$(CCTYPE)" == "BORLAND"

+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \

+	    @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)

+.ELIF "$(CCTYPE)" == "GCC"

+	$(LINK32) -v -o $@ $(BLINK_FLAGS) \

+	    $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))

+.ELSE

+	$(LINK32) -subsystem:console -out:$@ \

+	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))

+.ENDIF

+

+perlmain.c : runperl.c 

+	copy runperl.c perlmain.c

+

+perlmain$(o) : perlmain.c

+	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

+

+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)

+.IF "$(CCTYPE)" == "BORLAND"

+	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \

+	    @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \

+	    $(@:s,\,\\),\n \

+	    $(PERLIMPLIB) $(LIBFILES)\n)

+.ELIF "$(CCTYPE)" == "GCC"

+	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \

+	    $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)

+.ELSE

+	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \

+	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)

+.ENDIF

+	copy $(PERLEXE) $(WPERLEXE)

+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS

+	copy splittree.pl .. 

+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

+

+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)

+	if not exist $(AUTODIR) mkdir $(AUTODIR)

+	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL

+	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL

+	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)

+	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)

+	cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c

+	$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .

+

+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs

+	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

+

+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs

+	cd $(EXTDIR)\Data\$(*B) && \

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\Data\$(*B) && $(MAKE)

+

+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs

+	cd $(EXTDIR)\Devel\$(*B) && \

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\Devel\$(*B) && $(MAKE)

+

+$(GLOB_DLL): $(PERLEXE) $(GLOB).xs

+	cd $(EXTDIR)\File\$(*B) && \

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\File\$(*B) && $(MAKE)

+

+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs

+	cd $(EXTDIR)\Devel\$(*B) && \

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\Devel\$(*B) && $(MAKE)

+

+$(RE_DLL): $(PERLEXE) $(RE).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(B_DLL): $(PERLEXE) $(B).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(IO_DLL): $(PERLEXE) $(IO).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs

+	cd $(EXTDIR)\Sys\$(*B) && \

+	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\Sys\$(*B) && $(MAKE)

+

+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL

+	cd $(EXTDIR)\$(*B) && \

+	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl

+	cd $(EXTDIR)\$(*B) && $(MAKE)

+

+doc: $(PERLEXE)

+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \

+	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\

+	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

+

+utils: $(PERLEXE) $(X2P)

+	cd ..\utils && $(MAKE) PERL=$(MINIPERL)

+	copy ..\README.amiga ..\pod\perlamiga.pod

+	copy ..\README.cygwin ..\pod\perlcygwin.pod

+	copy ..\README.dos ..\pod\perldos.pod

+	copy ..\README.hpux ..\pod\perlhpux.pod

+	copy ..\README.machten ..\pod\perlmachten.pod

+	copy ..\README.os2 ..\pod\perlos2.pod

+	copy ..\README.os2 ..\pod\perlos2.pod

+	copy ..\vms\perlvms.pod ..\pod\perlvms.pod

+	cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters

+	cd ..\lib && $(PERLEXE) lib_pm.PL

+	$(PERLEXE) $(PL2BAT) $(UTILS)

+

+distclean: clean

+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \

+		$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)

+	-del /f *.def *.map

+	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)

+	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm

+	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs

+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm

+	-del /f $(LIBDIR)\XSLoader.pm

+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm

+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm

+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm

+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm

+	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm

+	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm

+	-del /f $(LIBDIR)\File\Glob.pm

+	-del /f $(LIBDIR)\Storable.pm

+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO

+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread

+	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B

+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data

+	-del /f $(PODDIR)\*.html

+	-del /f $(PODDIR)\*.bat

+	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \

+	    dprofpp *.bat

+	-cd ..\x2p && del /f find2perl s2p *.bat

+	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new

+	-del /f $(CONFIGPM)

+	-del /f bin\*.bat

+	-cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \

+	    pm_to_blib

+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)

+	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)

+

+install : all installbare installhtml

+

+installbare : $(RIGHTMAKE) utils

+	$(PERLEXE) ..\installperl

+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*

+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*

+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

+

+installhtml : doc

+	$(RCOPY) html\*.* $(INST_HTML)\*.*

+

+inst_lib : $(CONFIGPM)

+	copy splittree.pl .. 

+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

+	$(RCOPY) ..\lib $(INST_LIB)\*.*

+

+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils

+	$(XCOPY) $(MINIPERL) ..\t\perl.exe

+.IF "$(CCTYPE)" == "BORLAND"

+	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)

+.ELSE

+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

+.ENDIF

+	attrib -r ..\t\*.*

+	copy test ..\t

+	cd ..\t && \

+	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

+

+test-prep : all utils

+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)

+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)

+.IF "$(CCTYPE)" == "BORLAND"

+	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)

+.ELSE

+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

+.ENDIF

+

+test : $(RIGHTMAKE) test-prep

+	cd ..\t && $(PERLEXE) -I..\lib harness

+

+test-notty : test-prep

+	set PERL_SKIP_TTY_TEST=1 && \

+	    cd ..\t && $(PERLEXE) -I.\lib harness

+

+test-wide : test-prep

+	set HARNESS_PERL_SWITCHES=-C && \

+	    cd ..\t && $(PERLEXE) -I..\lib harness

+

+test-wide-notty : test-prep

+	set PERL_SKIP_TTY_TEST=1 && \

+	    set HARNESS_PERL_SWITCHES=-C && \

+	    cd ..\t && $(PERLEXE) -I..\lib harness

+

+clean : 

+	-@erase miniperlmain$(o)

+	-@erase $(MINIPERL)

+	-@erase perlglob$(o)

+	-@erase perlmain$(o)

+	-@erase config.w32

+	-@erase /f config.h

+	-@erase $(GLOBEXE)

+	-@erase $(PERLEXE)

+	-@erase $(WPERLEXE)

+	-@erase $(PERLDLL)

+	-@erase $(CORE_OBJ)

+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)

+	-@erase $(WIN32_OBJ)

+	-@erase $(DLL_OBJ)

+	-@erase $(X2P_OBJ)

+	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res

+	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat

+	-@erase ..\x2p\*.exe ..\x2p\*.bat

+	-@erase *.ilk

+	-@erase *.pdb

+

+# Handy way to run perlbug -ok without having to install and run the

+# installed perlbug. We don't re-run the tests here - we trust the user.

+# Please *don't* use this unless all tests pass.

+# If you want to report test failures, use "dmake nok" instead.

+ok: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

+

+okfile: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

+ 

+nok: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"

+ 

+nokfile: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok