Re: perl@15047 WinCE

From: "H.Merijn Brand" <h.m.brand@hccnet.nl>
Date: Wed, 06 Mar 2002 13:41:30 +0100
Message-Id: <20020306134107.C6F8.H.M.BRAND@hccnet.nl>

Subject: Re: perl@15047 Win32
From: "H.Merijn Brand" <h.m.brand@hccnet.nl>
Date: Wed, 06 Mar 2002 13:46:02 +0100
Message-Id: <20020306134539.C6FB.H.M.BRAND@hccnet.nl>

Subject: Re: perl@15047 Epoc
From: "H.Merijn Brand" <h.m.brand@hccnet.nl>
Date: Wed, 06 Mar 2002 13:48:31 +0100
Message-Id: <20020306134811.C6FE.H.M.BRAND@hccnet.nl>

Subject: Re: perl@15047 NetWare
From: "H.Merijn Brand" <h.m.brand@hccnet.nl>
Date: Wed, 06 Mar 2002 13:55:46 +0100
Message-Id: <20020306135406.C701.H.M.BRAND@hccnet.nl>

p4raw-id: //depot/perl@15063

4 files changed, 1146 insertions, 1146 deletions

diff --git a/win32/Makefile b/win32/Makefile
index b1c7beee03..7b7bf345fb 100644
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -1,1116 +1,1116 @@
-#
-# Makefile to build perl on Windows NT using Microsoft NMAKE.
-# Supported compilers:
-#	Visual C++ 5.x (possibly other versions)
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll).  Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration.  Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "nmake install" to put your
-# newly built perl.
-#
-INST_DRV	= c:
-INST_TOP	= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location.  Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to.  If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-#INST_VER = \5.7.2
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components.  This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files.  Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location.  Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-#INST_ARCH = \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters.  This is need for fork()
-# emulation.
-#
-USE_MULTI = define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation.  This needs
-# USE_MULTI as well.
-#
-USE_ITHREADS = define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl.  This needs USE_MULTI above.  This is also needed to
-# get fork().
-#
-USE_IMP_SYS = define
-
-#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO	= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities.  This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS	= define
-
-#
-# uncomment one of the following lines if you are using either
-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
-#
-#CCTYPE		= MSVC20
-#CCTYPE		= MSVC60
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-#
-#CFG		= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT	= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful.  This option is supported only with
-# Visual C.
-#
-#USE_SETARGV	= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32).  File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC	= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB	= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it.  Be prepared to recompile all
-# extensions if you change the default.  Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC	= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME		= f:\msvc20
-CCHOME		= $(MSVCDIR)
-CCINCDIR	= $(CCHOME)\include
-CCLIBDIR	= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution.  You most
-# probably just want to build modules that won't compile with
-#         perl Makefile.PL POLLUTE=1
-# instead of enabling this.  Please report such modules to the respective
-# authors.
-#
-#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE
-
-#
-# This should normally be disabled.  Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled.  Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS	=
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL		=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT		= undef
-!ELSE
-D_CRYPT		= define
-CRYPT_FLAG	= -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC	= undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS	= undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC	= undef
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI	= undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS	= undef
-!ENDIF
-
-!IF "$(USE_PERLIO)" == ""
-USE_PERLIO	= undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
-USE_MULTI	= define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
-USE_MULTI	= define
-USE_5005THREADS	= undef
-!ENDIF
-
-!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""
-PROCESSOR_ARCHITECTURE	= x86
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
-!IF "$(USE_MULTI)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-!ELSE
-!IF "$(USE_PERLIO)" == "define"
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
-!ELSE
-ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
-!ENDIF
-!ENDIF
-!ENDIF
-
-!IF "$(USE_PERLIO)" == "define"
-BUILDOPT	= $(BUILDOPT) -DUSE_PERLIO
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == "define"
-ARCHNAME	= $(ARCHNAME)-thread
-!ENDIF
-
-# Visual Studio 98 specific
-!IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand.  Makes the test suite
-# run in about 10% less time.
-DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-!ENDIF
-
-ARCHDIR		= ..\lib\$(ARCHNAME)
-COREDIR		= ..\lib\CORE
-AUTODIR		= ..\lib\auto
-LIBDIR		= ..\lib
-EXTDIR		= ..\ext
-PODDIR		= ..\pod
-EXTUTILSDIR	= $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
-INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB	= $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
-INST_COREDIR	= $(INST_ARCHLIB)\CORE
-INST_POD	= $(INST_LIB)\pod
-INST_HTML	= $(INST_TOP)$(INST_VER)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-CC		= cl
-LINK32		= link
-LIB32		= $(LINK32) -lib
-RSC		= rc
-
-#
-# Options
-#
-
-INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX
-DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS		= -DPERLDLL -DPERL_CORE
-SUBSYS		= console
-CXX_FLAG	= -TP -GX
-
-!IF "$(USE_PERLCRT)" != "define"
-LIBC	= msvcrt.lib
-!ELSE
-LIBC	= PerlCRT.lib
-!ENDIF
-
-PERLEXE_RES	=
-PERLDLL_RES	=
-
-!IF  "$(CFG)" == "Debug"
-!  IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
-!  ELSE
-OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
-!  ENDIF
-LINK_DBG	= -debug -pdb:none
-!ELSE
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE	= -O2 -MD -DNDEBUG
-OPTIMIZE	= -O1 -MD -DNDEBUG
-LINK_DBG	= -release
-!ENDIF
-
-!IF "$(USE_PERLCRT)" != "define"
-BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX
-!ENDIF
-
-LIBBASEFILES	= $(CRYPT_LIB) \
-		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
-		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
-		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
-		version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES	= $(LIBBASEFILES) $(LIBC)
-
-CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-		$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
-		-libpath:"$(INST_COREDIR)" \
-		-machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG	= -Fo
-EXEOUT_FLAG	= -Fe
-
-CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o = .obj
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
-	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
-	$(NOOP)
-
-$(o).dll:
-	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-
-.rc.res:
-	$(RSC) -i.. $<
-
-#
-# various targets
-
-# makedef.pl must be updated if this changes, and this should normally
-# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB	= ..\perl57.lib
-PERLDLL		= ..\perl57.dll
-
-MINIPERL	= ..\miniperl.exe
-MINIDIR		= .\mini
-PERLEXE		= ..\perl.exe
-WPERLEXE	= ..\wperl.exe
-GLOBEXE		= ..\perlglob.exe
-CONFIGPM	= ..\lib\Config.pm
-MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
-X2P		= ..\x2p\a2p.exe
-
-# Nominate a target which causes extensions to be re-built
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend
-# on and really only the interface - i.e. the .def file used to export symbols
-# from the .dll
-PERLDEP		= perldll.def
-
-PL2BAT		= bin\pl2bat.pl
-GLOBBAT		= bin\perlglob.bat
-
-UTILS		=			\
-		..\utils\h2ph		\
-		..\utils\splain		\
-		..\utils\dprofpp	\
-		..\utils\perlbug	\
-		..\utils\pl2pm 		\
-		..\utils\c2ph		\
-		..\utils\h2xs		\
-		..\utils\perldoc	\
-		..\utils\perlcc		\
-		..\utils\perlivp	\
-		..\utils\libnetcfg	\
-		..\pod\checkpods	\
-		..\pod\pod2html		\
-		..\pod\pod2latex	\
-		..\pod\pod2man		\
-		..\pod\pod2text		\
-		..\pod\pod2usage	\
-		..\pod\podchecker	\
-		..\pod\podselect	\
-		..\x2p\find2perl	\
-		..\x2p\s2p		\
-		..\lib\ExtUtils\xsubpp	\
-		bin\exetype.pl		\
-		bin\runperl.pl		\
-		bin\pl2bat.pl		\
-		bin\perlglob.pl		\
-		bin\search.pl
-
-MAKE		= nmake -nologo
-MAKE_BARE	= nmake
-
-CFGSH_TMPL	= config.vc
-CFGH_TMPL	= config_H.vc
-
-XCOPY		= xcopy /f /r /i /d
-RCOPY		= xcopy /f /r /i /e /d
-NOOP		= @echo
-NULL		=
-
-DEL		= del
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-		-C++ -prototypes
-
-MICROCORE_SRC	=		\
-		..\av.c		\
-		..\deb.c	\
-		..\doio.c	\
-		..\doop.c	\
-		..\dump.c	\
-		..\globals.c	\
-		..\gv.c		\
-		..\hv.c		\
-		..\locale.c	\
-		..\mg.c		\
-		..\numeric.c	\
-		..\op.c		\
-		..\perl.c	\
-		..\perlapi.c	\
-		..\perly.c	\
-		..\pp.c		\
-		..\pp_ctl.c	\
-		..\pp_hot.c	\
-		..\pp_pack.c	\
-		..\pp_sort.c	\
-		..\pp_sys.c	\
-		..\regcomp.c	\
-		..\regexec.c	\
-		..\run.c	\
-		..\scope.c	\
-		..\sv.c		\
-		..\taint.c	\
-		..\toke.c	\
-		..\universal.c	\
-		..\utf8.c	\
-		..\util.c	\
-		..\xsutils.c
-
-EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
-
-WIN32_SRC	=		\
-		.\win32.c	\
-		.\win32sck.c	\
-		.\win32thread.c
-
-!IF "$(USE_PERLIO)" == "define"
-WIN32_SRC	= $(WIN32_SRC) .\win32io.c
-!ENDIF
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC		= $(DYNALOADER).c
-
-X2P_SRC		=		\
-		..\x2p\a2p.c	\
-		..\x2p\hash.c	\
-		..\x2p\str.c	\
-		..\x2p\util.c	\
-		..\x2p\walk.c
-
-CORE_NOCFG_H	=		\
-		..\av.h		\
-		..\cop.h	\
-		..\cv.h		\
-		..\dosish.h	\
-		..\embed.h	\
-		..\form.h	\
-		..\gv.h		\
-		..\handy.h	\
-		..\hv.h		\
-		..\iperlsys.h	\
-		..\mg.h		\
-		..\nostdio.h	\
-		..\op.h		\
-		..\opcode.h	\
-		..\perl.h	\
-		..\perlapi.h	\
-		..\perlsdio.h	\
-		..\perlsfio.h	\
-		..\perly.h	\
-		..\pp.h		\
-		..\proto.h	\
-		..\regexp.h	\
-		..\scope.h	\
-		..\sv.h		\
-		..\thread.h	\
-		..\unixish.h	\
-		..\utf8.h	\
-		..\util.h	\
-		..\warnings.h	\
-		..\XSUB.h	\
-		..\EXTERN.h	\
-		..\perlvars.h	\
-		..\intrpvar.h	\
-		..\thrdvar.h	\
-		.\include\dirent.h	\
-		.\include\netdb.h	\
-		.\include\sys\socket.h	\
-		.\win32.h
-
-CORE_H		= $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
-		  $(MINIDIR)\miniperlmain$(o)	\
-		  $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
-MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ		= $(DLL_SRC:.c=.obj)
-X2P_OBJ		= $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ	= $(CORE_OBJ)
-PERLEXE_OBJ	= perlmain$(o)
-
-PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ	= setargv$(o)
-!ENDIF
-
-DYNALOADER		= $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET			= $(EXTDIR)\Socket\Socket
-FCNTL			= $(EXTDIR)\Fcntl\Fcntl
-OPCODE			= $(EXTDIR)\Opcode\Opcode
-SDBM_FILE		= $(EXTDIR)\SDBM_File\SDBM_File
-IO			= $(EXTDIR)\IO\IO
-POSIX			= $(EXTDIR)\POSIX\POSIX
-ATTRS			= $(EXTDIR)\attrs\attrs
-THREAD			= $(EXTDIR)\Thread\Thread
-B			= $(EXTDIR)\B\B
-RE			= $(EXTDIR)\re\re
-DUMPER			= $(EXTDIR)\Data\Dumper\Dumper
-ERRNO			= $(EXTDIR)\Errno\Errno
-PEEK			= $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER		= $(EXTDIR)\ByteLoader\ByteLoader
-DPROF			= $(EXTDIR)\Devel\DProf\DProf
-GLOB			= $(EXTDIR)\File\Glob\Glob
-HOSTNAME		= $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE		= $(EXTDIR)\Storable\Storable
-FILTER			= $(EXTDIR)\Filter\Util\Call\Call
-ENCODE			= $(EXTDIR)\Encode\Encode
-MD5			= $(EXTDIR)\Digest\MD5\MD5
-PERLIOSCALAR		= $(EXTDIR)\PerlIO\Scalar\Scalar
-MIMEBASE64		= $(EXTDIR)\MIME\Base64\Base64
-TIMEHIRES		= $(EXTDIR)\Time\HiRes\HiRes
-CWD			= $(EXTDIR)\Cwd\Cwd
-LISTUTIL  		= $(EXTDIR)\List\Util\Util
-PERLIOVIA		= $(EXTDIR)\PerlIO\Via\Via
-XSTYPEMAP		= $(EXTDIR)\XS\Typemap\Typemap
-UNICODENORMALIZE	= $(EXTDIR)\Unicode\Normalize\Normalize
-
-SOCKET_DLL		= $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL		= $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL		= $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL		= $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL			= $(AUTODIR)\IO\IO.dll
-POSIX_DLL		= $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL		= $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL		= $(AUTODIR)\Thread\Thread.dll
-B_DLL			= $(AUTODIR)\B\B.dll
-DUMPER_DLL		= $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL		= $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL			= $(AUTODIR)\re\re.dll
-BYTELOADER_DLL		= $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL		= $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL		= $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL		= $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL		= $(AUTODIR)\Storable\Storable.dll
-FILTER_DLL		= $(AUTODIR)\Filter\Util\Call\Call.dll
-ENCODE_DLL		= $(AUTODIR)\Encode\Encode.dll
-MD5_DLL			= $(AUTODIR)\Digest\MD5\MD5.dll
-PERLIOSCALAR_DLL	= $(AUTODIR)\PerlIO\Scalar\Scalar.dll
-MIMEBASE64_DLL		= $(AUTODIR)\MIME\Base64\Base64.dll
-TIMEHIRES_DLL		= $(AUTODIR)\Time\HiRes\HiRes.dll
-CWD_DLL			= $(AUTODIR)\Cwd\Cwd.dll
-LISTUTIL_DLL		= $(AUTODIR)\List\Util\Util.dll
-PERLIOVIA_DLL		= $(AUTODIR)\PerlIO\Via\Via.dll
-XSTYPEMAP_DLL		= $(AUTODIR)\XS\Typemap\Typemap.dll
-UNICODENORMALIZE_DLL	= $(AUTODIR)\Unicode\Normalize\Normalize.dll
-
-EXTENSION_C	= 		\
-		$(SOCKET).c	\
-		$(FCNTL).c	\
-		$(OPCODE).c	\
-		$(SDBM_FILE).c	\
-		$(IO).c		\
-		$(POSIX).c	\
-		$(ATTRS).c	\
-		$(THREAD).c	\
-		$(RE).c		\
-		$(DUMPER).c	\
-		$(PEEK).c	\
-		$(B).c		\
-		$(BYTELOADER).c	\
-		$(DPROF).c	\
-		$(GLOB).c	\
-		$(HOSTNAME).c	\
-		$(STORABLE).c	\
-		$(FILTER).c	\
-		$(ENCODE).c	\
-		$(MD5).c	\
-		$(PERLIOSCALAR).c	\
-		$(MIMEBASE64).c	\
-		$(TIMEHIRES).c	\
-		$(CWD).c	\
-		$(LISTUTIL).c	\
-		$(PERLIOVIA).c	\
-		$(XSTYPEMAP).c	\
-		$(UNICODENORMALIZE).c
-
-EXTENSION_DLL	= 		\
-		$(SOCKET_DLL)	\
-		$(FCNTL_DLL)	\
-		$(OPCODE_DLL)	\
-		$(SDBM_FILE_DLL)\
-		$(IO_DLL)	\
-		$(POSIX_DLL)	\
-		$(ATTRS_DLL)	\
-		$(DUMPER_DLL)	\
-		$(PEEK_DLL)	\
-		$(B_DLL)	\
-		$(RE_DLL)	\
-		$(THREAD_DLL)	\
-		$(BYTELOADER_DLL)	\
-		$(DPROF_DLL)	\
-		$(GLOB_DLL)	\
-		$(HOSTNAME_DLL)	\
-		$(STORABLE_DLL)	\
-		$(FILTER_DLL)   \
-		$(ENCODE_DLL)   \
-		$(MD5_DLL)	\
-		$(PERLIOSCALAR_DLL) \
-		$(MIMEBASE64_DLL) \
-		$(TIMEHIRES_DLL)  \
-		$(CWD_DLL)	\
-		$(LISTUTIL_DLL)	\
-		$(PERLIOVIA_DLL)	\
-		$(XSTYPEMAP_DLL)	\
-		$(UNICODENORMALIZE_DLL)
-
-POD2HTML	= $(PODDIR)\pod2html
-POD2MAN		= $(PODDIR)\pod2man
-POD2LATEX	= $(PODDIR)\pod2latex
-POD2TEXT	= $(PODDIR)\pod2text
-
-CFG_VARS	=					\
-		"INST_DRV=$(INST_DRV)"			\
-		"INST_TOP=$(INST_TOP)"			\
-		"INST_VER=$(INST_VER)"			\
-		"INST_ARCH=$(INST_ARCH)"		\
-		"archname=$(ARCHNAME)"			\
-		"cc=$(CC)"				\
-		"ld=$(LINK32)"				\
-		"ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
-		"cf_email=$(EMAIL)"	 		\
-		"d_crypt=$(D_CRYPT)"			\
-		"d_mymalloc=$(PERL_MALLOC)"		\
-		"libs=$(LIBFILES)"			\
-		"incpath=$(CCINCDIR:"=\")"		\
-		"libperl=$(PERLIMPLIB:..\=)"		\
-		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
-		"libc=$(LIBC)"				\
-		"make=$(MAKE_BARE)"				\
-		"use5005threads=$(USE_5005THREADS)"	\
-		"useithreads=$(USE_ITHREADS)"		\
-		"usethreads=$(USE_5005THREADS)"		\
-		"usemultiplicity=$(USE_MULTI)"		\
-		"useperlio=$(USE_PERLIO)"		\
-		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
-		"optimize=$(OPTIMIZE:"=\")"
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
-	$(X2P) Extensions
-	@echo	Everything is up to date. '$(MAKE_BARE) test' to run test suite.
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#------------------------------------------------------------
-
-$(GLOBEXE) : perlglob$(o)
-	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
-	    perlglob$(o) setargv$(o)
-
-perlglob$(o)  : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
-	copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL)
-	-del /f config.h
-	copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
-	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
-	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
-	cd ..
-	-del /f perl.exe
-	perl configpm
-	cd win32
-	-del /f $(CFGH_TMPL)
-	-mkdir $(COREDIR)
-	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-	rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
-	cd ..
-	miniperl configpm
-	cd win32
-	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
-	$(XCOPY) ..\*.h $(COREDIR)\*.*
-	$(XCOPY) *.h $(COREDIR)\*.*
-	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
-	$(RCOPY) include $(COREDIR)\*.*
-	-$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-	if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
-	$(LINK32) -subsystem:console -out:$@ @<<
-	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
-<<
-
-$(MINIDIR) :
-	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
-	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
-	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)" == "define"
-perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
-	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-!ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ)	: $(CORE_NOCFG_H)
-
-$(WIN32_OBJ)	: $(CORE_H)
-$(CORE_OBJ)	: $(CORE_H)
-$(DLL_OBJ)	: $(CORE_H)
-$(X2P_OBJ)	: $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
-	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
-	    CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
-		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
-<<
-	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
-	cd ..
-	miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-	cd win32
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
-	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
-	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
-	$(MINIPERL) ..\x2p\find2perl.PL
-	$(MINIPERL) ..\x2p\s2p.PL
-	$(LINK32) -subsystem:console -out:$@ @<<
-		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
-<<
-
-perlmain.c : runperl.c
-	copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
-	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
-	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-	copy $(PERLEXE) $(WPERLEXE)
-	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
-	copy splittree.pl ..
-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
-	if not exist $(AUTODIR) mkdir $(AUTODIR)
-	cd $(EXTDIR)\$(*B)
-	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
-	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
-	cd ..\..\win32
-	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
-	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
-	cd $(EXTDIR)\$(*B)
-	$(XSUBPP) dl_win32.xs > $(*B).c
-	cd ..\..\win32
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
-	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-#----------------------------------------------------------------------------------
-Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
-	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-
-Extensions_clean: 
-	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-
-#----------------------------------------------------------------------------------
-
-doc: $(PERLEXE)
-	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
-	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
-	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
-	cd ..\utils
-	$(MAKE) PERL=$(MINIPERL)
-	cd ..\pod
-	copy ..\README.aix      .\perlaix.pod
-	copy ..\README.amiga    .\perlamiga.pod
-	copy ..\README.apollo   .\perlapollo.pod
-	copy ..\README.beos     .\perlbeos.pod
-	copy ..\README.bs2000   .\perlbs2000.pod
-	copy ..\README.ce	.\perlce.pod
-	copy ..\README.cygwin   .\perlcygwin.pod
-	copy ..\README.dgux     .\perldgux.pod
-	copy ..\README.dos      .\perldos.pod
-	copy ..\README.epoc     .\perlepoc.pod
-	copy ..\README.hurd     .\perlhurd.pod
-	copy ..\README.hpux     .\perlhpux.pod
-	copy ..\README.machten  .\perlmachten.pod
-	copy ..\README.macos    .\perlmacos.pod
-	copy ..\README.mint     .\perlmint.pod
-	copy ..\README.mpeix    .\perlmpeix.pod
-	copy ..\README.netware  .\perlnetware.pod
-	copy ..\README.os2      .\perlos2.pod
-	copy ..\README.os390    .\perlos390.pod
-	copy ..\README.plan9    .\perlplan9.pod
-	copy ..\README.qnx      .\perlqnx.pod
-	copy ..\README.solaris  .\perlsolaris.pod
-	copy ..\README.tru64    .\perltru64.pod
-	copy ..\README.uts      .\perluts.pod
-	copy ..\README.vmesa    .\perlvmesa.pod
-	copy ..\vms\perlvms.pod .\perlvms.pod
-	copy ..\README.vos      .\perlvos.pod
-	copy ..\README.win32    .\perlwin32.pod
-	$(MAKE) -f ..\win32\pod.mak converters
-	cd ..\lib
-	$(PERLEXE) lib_pm.PL
-	cd ..\win32
-	$(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
-	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
-		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-	-del /f *.def *.map
-	-del /f $(EXTENSION_DLL)
-	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-	-del /f $(LIBDIR)\XSLoader.pm
-	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-	-del /f $(LIBDIR)\File\Glob.pm
-	-del /f $(LIBDIR)\Storable.pm
-	-del /f $(LIBDIR)\Filter\Util\Call.pm
-	-del /f $(LIBDIR)\Digest\MD5.pm
-	-del /f $(LIBDIR)\PerlIO\Scalar.pm
-	-del /f $(LIBDIR)\PerlIO\Via.pm
-	-del /f $(LIBDIR)\MIME\Base64.pm
-	-del /f $(LIBDIR)\MIME\QuotedPrint.pm
-	-del /f $(LIBDIR)\List\Util.pm
-	-del /f $(LIBDIR)\Scalar\Util.pm
-	-del /f $(LIBDIR)\Time\HiRes.pm
-	-del /f $(LIBDIR)\XS\Typemap.pm
-	-del /f $(LIBDIR)\Unicode\Normalize.pm
-	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
-	-rmdir /s $(LIBDIR)\IO
-	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
-	-rmdir /s $(LIBDIR)\Thread
-	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
-	-rmdir /s $(LIBDIR)\B
-	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
-	-rmdir /s $(LIBDIR)\Data
-	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
-	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
-	-rmdir /s $(LIBDIR)\Digest
-	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-	-rmdir /s $(LIBDIR)\MIME
-	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
-	-rmdir /s $(LIBDIR)\List
-	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
-	-rmdir /s $(LIBDIR)\Scalar
-	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-	-rmdir /s $(LIBDIR)\XS
-	cd $(PODDIR)
-	-del /f *.html *.bat checkpods \
-	    perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
-	    perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
-	    perldos.pod perlepoc.pod perlhurd.pod \
-	    perlhpux.pod perlmachten.pod \
-	    perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
-	    perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
-	    perlsolaris.pod perltru64.pod perluts.pod \
-	    perlvmesa.pod perlvms.pod perlvos.pod \
-	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
-	    podchecker podselect
-	cd ..\utils
-	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp
-	-del /f *.bat
-	cd ..\win32
-	cd ..\x2p
-	-del /f find2perl s2p
-	-del /f *.bat
-	cd ..\win32
-	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-	-del /f $(CONFIGPM)
-	-del /f bin\*.bat
-	cd $(EXTDIR)
-	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
-	cd ..\win32
-	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-	-rmdir /s $(AUTODIR)
-	-if exist $(COREDIR) rmdir /s /q $(COREDIR)
-	-rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : utils
-	$(PERLEXE) ..\installperl
-	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
-	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
-	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
-	$(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
-	copy splittree.pl ..
-	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-	$(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
-	$(XCOPY) $(MINIPERL) ..\t\perl.exe
-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-	attrib -r ..\t\*.*
-	copy test ..\t
-	cd ..\t
-	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-	cd ..\win32
-
-test-prep : all utils
-	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
-	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
-	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-
-test : test-prep
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-test-notty : test-prep
-	set PERL_SKIP_TTY_TEST=1
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-test-wide : test-prep
-	set HARNESS_PERL_SWITCHES=-C
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-test-wide-notty : test-prep
-	set PERL_SKIP_TTY_TEST=1
-	set HARNESS_PERL_SWITCHES=-C
-	cd ..\t
-	$(PERLEXE) -I..\lib harness
-	cd ..\win32
-
-clean : Extensions_clean
-	-@$(DEL) miniperlmain$(o)
-	-@$(DEL) $(MINIPERL)
-	-@$(DEL) perlglob$(o)
-	-@$(DEL) perlmain$(o)
-	-@$(DEL) config.w32
-	-@$(DEL) config.h
-	-@$(DEL) $(GLOBEXE)
-	-@$(DEL) $(PERLEXE)
-	-@$(DEL) $(WPERLEXE)
-	-@$(DEL) $(PERLDLL)
-	-@$(DEL) $(CORE_OBJ)
-	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
-	-rmdir /s $(MINIDIR)
-	-@$(DEL) $(WIN32_OBJ)
-	-@$(DEL) $(DLL_OBJ)
-	-@$(DEL) $(X2P_OBJ)
-	-@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
-	-@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
-	-@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
-	-@$(DEL) *.ilk
-	-@$(DEL) *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "nmake nok" instead.
-ok: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
-	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#

+# Makefile to build perl on Windows NT using Microsoft NMAKE.

+# Supported compilers:

+#	Visual C++ 5.x (possibly other versions)

+#

+# This is set up to build a perl.exe that runs off a shared library

+# (perl57.dll).  Also makes individual DLLs for the XS extensions.

+#

+

+##

+## Make sure you read README.win32 *before* you mess with anything here!

+##

+

+##

+## Build configuration.  Edit the values below to suit your needs.

+##

+

+#

+# Set these to wherever you want "nmake install" to put your

+# newly built perl.

+#

+INST_DRV	= c:

+INST_TOP	= $(INST_DRV)\perl

+

+#

+# Comment this out if you DON'T want your perl installation to be versioned.

+# This means that the new installation will overwrite any files from the

+# old installation at the same INST_TOP location.  Leaving it enabled is

+# the safest route, as perl adds the extra version directory to all the

+# locations it installs files to.  If you disable it, an alternative

+# versioned installation can be obtained by setting INST_TOP above to a

+# path that includes an arbitrary version string.

+#

+#INST_VER = \5.7.2

+

+#

+# Comment this out if you DON'T want your perl installation to have

+# architecture specific components.  This means that architecture-

+# specific files will be installed along with the architecture-neutral

+# files.  Leaving it enabled is safer and more flexible, in case you

+# want to build multiple flavors of perl and install them together in

+# the same location.  Commenting it out gives you a simpler

+# installation that is easier to understand for beginners.

+#

+#INST_ARCH = \$(ARCHNAME)

+

+#

+# uncomment to enable multiple interpreters.  This is need for fork()

+# emulation.

+#

+USE_MULTI = define

+

+#

+# Beginnings of interpreter cloning/threads; still very incomplete.

+# This should be enabled to get the fork() emulation.  This needs

+# USE_MULTI as well.

+#

+USE_ITHREADS = define

+

+#

+# uncomment to enable the implicit "host" layer for all system calls

+# made by perl.  This needs USE_MULTI above.  This is also needed to

+# get fork().

+#

+USE_IMP_SYS = define

+

+#

+# uncomment to enable the experimental PerlIO I/O subsystem.

+USE_PERLIO	= define

+

+#

+# WARNING! This option is deprecated and will eventually go away (enable

+# USE_ITHREADS instead).

+#

+# uncomment to enable threads-capabilities.  This is incompatible with

+# USE_ITHREADS, and is only here for people who may have come to rely

+# on the experimental Thread support that was in 5.005.

+#

+#USE_5005THREADS	= define

+

+#

+# uncomment one of the following lines if you are using either

+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)

+#

+#CCTYPE		= MSVC20

+#CCTYPE		= MSVC60

+

+#

+# uncomment next line if you want debug version of perl (big,slow)

+#

+#CFG		= Debug

+

+#

+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.

+# It has patches that fix known bugs in older versions of MSVCRT.DLL.

+# This currently requires VC 5.0 with Service Pack 3 or later.

+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/

+# and follow the directions in the package to install.

+#

+# Not recommended if you have VC 6.x and you're not running Windows 9x.

+#

+#USE_PERLCRT	= define

+

+#

+# uncomment to enable linking with setargv.obj under the Visual C

+# compiler. Setting this options enables perl to expand wildcards in

+# arguments, but it may be harder to use alternate methods like

+# File::DosGlob that are more powerful.  This option is supported only with

+# Visual C.

+#

+#USE_SETARGV	= define

+

+#

+# if you have the source for des_fcrypt(), uncomment this and make sure the

+# file exists (see README.win32).  File should be located in the same

+# directory as this file.

+#

+#CRYPT_SRC	= fcrypt.c

+

+#

+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a

+# library, uncomment this, and make sure the library exists (see README.win32)

+# Specify the full pathname of the library.

+#

+#CRYPT_LIB	= fcrypt.lib

+

+#

+# set this if you wish to use perl's malloc

+# WARNING: Turning this on/off WILL break binary compatibility with extensions

+# you may have compiled with/without it.  Be prepared to recompile all

+# extensions if you change the default.  Currently, this cannot be enabled

+# if you ask for USE_IMP_SYS above.

+#

+#PERL_MALLOC	= define

+

+#

+# set the install locations of the compiler include/libraries

+# Running VCVARS32.BAT is *required* when using Visual C.

+# Some versions of Visual C don't define MSVCDIR in the environment,

+# so you may have to set CCHOME explicitly (spaces in the path name should

+# not be quoted)

+#

+#CCHOME		= f:\msvc20

+CCHOME		= $(MSVCDIR)

+CCINCDIR	= $(CCHOME)\include

+CCLIBDIR	= $(CCHOME)\lib

+

+#

+# Additional compiler flags can be specified here.

+#

+

+#

+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support

+# for old symbols by default, at the expense of extreme pollution.  You most

+# probably just want to build modules that won't compile with

+#         perl Makefile.PL POLLUTE=1

+# instead of enabling this.  Please report such modules to the respective

+# authors.

+#

+#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE

+

+#

+# This should normally be disabled.  Enabling it will disable the File::Glob

+# implementation of CORE::glob.

+#

+#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB

+

+#

+# This should normally be disabled.  Enabling it causes perl to read scripts

+# in text mode (which is the 5.005 behavior) and will break ByteLoader.

+#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS

+

+#

+# specify semicolon-separated list of extra directories that modules will

+# look for libraries (spaces in path names need not be quoted)

+#

+EXTRALIBDIRS	=

+

+#

+# set this to your email address (perl will guess a value from

+# from your loginname and your hostname, which may not be right)

+#

+#EMAIL		=

+

+##

+## Build configuration ends.

+##

+

+##################### CHANGE THESE ONLY IF YOU MUST #####################

+

+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""

+D_CRYPT		= undef

+!ELSE

+D_CRYPT		= define

+CRYPT_FLAG	= -DHAVE_DES_FCRYPT

+!ENDIF

+

+!IF "$(PERL_MALLOC)" == ""

+PERL_MALLOC	= undef

+!ENDIF

+

+!IF "$(USE_5005THREADS)" == ""

+USE_5005THREADS	= undef

+!ENDIF

+

+!IF "$(USE_5005THREADS)" == "define"

+USE_ITHREADS	= undef

+!ENDIF

+

+!IF "$(USE_IMP_SYS)" == "define"

+PERL_MALLOC	= undef

+!ENDIF

+

+!IF "$(USE_MULTI)" == ""

+USE_MULTI	= undef

+!ENDIF

+

+!IF "$(USE_ITHREADS)" == ""

+USE_ITHREADS	= undef

+!ENDIF

+

+!IF "$(USE_IMP_SYS)" == ""

+USE_IMP_SYS	= undef

+!ENDIF

+

+!IF "$(USE_PERLIO)" == ""

+USE_PERLIO	= undef

+!ENDIF

+

+!IF "$(USE_PERLCRT)" == ""

+USE_PERLCRT	= undef

+!ENDIF

+

+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"

+USE_MULTI	= define

+!ENDIF

+

+!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"

+USE_MULTI	= define

+USE_5005THREADS	= undef

+!ENDIF

+

+!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"

+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT

+!ENDIF

+

+!IF "$(USE_IMP_SYS)" != "undef"

+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS

+!ENDIF

+

+!IF "$(PROCESSOR_ARCHITECTURE)" == ""

+PROCESSOR_ARCHITECTURE	= x86

+!ENDIF

+

+!IF "$(USE_5005THREADS)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread

+!ELSE

+!IF "$(USE_MULTI)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi

+!ELSE

+!IF "$(USE_PERLIO)" == "define"

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio

+!ELSE

+ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)

+!ENDIF

+!ENDIF

+!ENDIF

+

+!IF "$(USE_PERLIO)" == "define"

+BUILDOPT	= $(BUILDOPT) -DUSE_PERLIO

+!ENDIF

+

+!IF "$(USE_ITHREADS)" == "define"

+ARCHNAME	= $(ARCHNAME)-thread

+!ENDIF

+

+# Visual Studio 98 specific

+!IF "$(CCTYPE)" == "MSVC60"

+

+# VC 6.0 can load the socket dll on demand.  Makes the test suite

+# run in about 10% less time.

+DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib

+!ENDIF

+

+ARCHDIR		= ..\lib\$(ARCHNAME)

+COREDIR		= ..\lib\CORE

+AUTODIR		= ..\lib\auto

+LIBDIR		= ..\lib

+EXTDIR		= ..\ext

+PODDIR		= ..\pod

+EXTUTILSDIR	= $(LIBDIR)\ExtUtils

+

+#

+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin

+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)

+INST_LIB	= $(INST_TOP)$(INST_VER)\lib

+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)

+INST_COREDIR	= $(INST_ARCHLIB)\CORE

+INST_POD	= $(INST_LIB)\pod

+INST_HTML	= $(INST_TOP)$(INST_VER)\html

+

+#

+# Programs to compile, build .lib files and link

+#

+

+CC		= cl

+LINK32		= link

+LIB32		= $(LINK32) -lib

+RSC		= rc

+

+#

+# Options

+#

+

+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..

+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX

+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)

+LOCDEFS		= -DPERLDLL -DPERL_CORE

+SUBSYS		= console

+CXX_FLAG	= -TP -GX

+

+!IF "$(USE_PERLCRT)" != "define"

+LIBC	= msvcrt.lib

+!ELSE

+LIBC	= PerlCRT.lib

+!ENDIF

+

+PERLEXE_RES	=

+PERLDLL_RES	=

+

+!IF  "$(CFG)" == "Debug"

+!  IF "$(CCTYPE)" == "MSVC20"

+OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING

+!  ELSE

+OPTIMIZE	= -Od -MD -Zi -DDEBUGGING

+!  ENDIF

+LINK_DBG	= -debug -pdb:none

+!ELSE

+# -O1 yields smaller code, which turns out to be faster than -O2

+#OPTIMIZE	= -O2 -MD -DNDEBUG

+OPTIMIZE	= -O1 -MD -DNDEBUG

+LINK_DBG	= -release

+!ENDIF

+

+!IF "$(USE_PERLCRT)" != "define"

+BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX

+!ENDIF

+

+LIBBASEFILES	= $(CRYPT_LIB) \

+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \

+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \

+		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \

+		version.lib odbc32.lib odbccp32.lib

+

+# we add LIBC here, since we may be using PerlCRT.dll

+LIBFILES	= $(LIBBASEFILES) $(LIBC)

+

+CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \

+		$(PCHFLAGS) $(OPTIMIZE)

+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \

+		-libpath:"$(INST_COREDIR)" \

+		-machine:$(PROCESSOR_ARCHITECTURE)

+OBJOUT_FLAG	= -Fo

+EXEOUT_FLAG	= -Fe

+

+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

+

+#################### do not edit below this line #######################

+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

+

+o = .obj

+

+#

+# Rules

+#

+

+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res

+

+.c$(o):

+	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

+

+.y.c:

+	$(NOOP)

+

+$(o).dll:

+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \

+	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)

+

+.rc.res:

+	$(RSC) -i.. $<

+

+#

+# various targets

+

+# makedef.pl must be updated if this changes, and this should normally

+# only change when there is an incompatible revision of the public API.

+# XXX so why did we change it from perl56 to perl57?

+PERLIMPLIB	= ..\perl57.lib

+PERLDLL		= ..\perl57.dll

+

+MINIPERL	= ..\miniperl.exe

+MINIDIR		= .\mini

+PERLEXE		= ..\perl.exe

+WPERLEXE	= ..\wperl.exe

+GLOBEXE		= ..\perlglob.exe

+CONFIGPM	= ..\lib\Config.pm

+MINIMOD		= ..\lib\ExtUtils\Miniperl.pm

+X2P		= ..\x2p\a2p.exe

+

+# Nominate a target which causes extensions to be re-built

+# This used to be $(PERLEXE), but at worst it is the .dll that they depend

+# on and really only the interface - i.e. the .def file used to export symbols

+# from the .dll

+PERLDEP		= perldll.def

+

+PL2BAT		= bin\pl2bat.pl

+GLOBBAT		= bin\perlglob.bat

+

+UTILS		=			\

+		..\utils\h2ph		\

+		..\utils\splain		\

+		..\utils\dprofpp	\

+		..\utils\perlbug	\

+		..\utils\pl2pm 		\

+		..\utils\c2ph		\

+		..\utils\h2xs		\

+		..\utils\perldoc	\

+		..\utils\perlcc		\

+		..\utils\perlivp	\

+		..\utils\libnetcfg	\

+		..\pod\checkpods	\

+		..\pod\pod2html		\

+		..\pod\pod2latex	\

+		..\pod\pod2man		\

+		..\pod\pod2text		\

+		..\pod\pod2usage	\

+		..\pod\podchecker	\

+		..\pod\podselect	\

+		..\x2p\find2perl	\

+		..\x2p\s2p		\

+		..\lib\ExtUtils\xsubpp	\

+		bin\exetype.pl		\

+		bin\runperl.pl		\

+		bin\pl2bat.pl		\

+		bin\perlglob.pl		\

+		bin\search.pl

+

+MAKE		= nmake -nologo

+MAKE_BARE	= nmake

+

+CFGSH_TMPL	= config.vc

+CFGH_TMPL	= config_H.vc

+

+XCOPY		= xcopy /f /r /i /d

+RCOPY		= xcopy /f /r /i /e /d

+NOOP		= @echo

+NULL		=

+

+DEL		= del

+

+#

+# filenames given to xsubpp must have forward slashes (since it puts

+# full pathnames in #line strings)

+XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \

+		-C++ -prototypes

+

+MICROCORE_SRC	=		\

+		..\av.c		\

+		..\deb.c	\

+		..\doio.c	\

+		..\doop.c	\

+		..\dump.c	\

+		..\globals.c	\

+		..\gv.c		\

+		..\hv.c		\

+		..\locale.c	\

+		..\mg.c		\

+		..\numeric.c	\

+		..\op.c		\

+		..\perl.c	\

+		..\perlapi.c	\

+		..\perly.c	\

+		..\pp.c		\

+		..\pp_ctl.c	\

+		..\pp_hot.c	\

+		..\pp_pack.c	\

+		..\pp_sort.c	\

+		..\pp_sys.c	\

+		..\regcomp.c	\

+		..\regexec.c	\

+		..\run.c	\

+		..\scope.c	\

+		..\sv.c		\

+		..\taint.c	\

+		..\toke.c	\

+		..\universal.c	\

+		..\utf8.c	\

+		..\util.c	\

+		..\xsutils.c

+

+EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c

+

+!IF "$(PERL_MALLOC)" == "define"

+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c

+!ENDIF

+

+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c

+

+WIN32_SRC	=		\

+		.\win32.c	\

+		.\win32sck.c	\

+		.\win32thread.c

+

+!IF "$(USE_PERLIO)" == "define"

+WIN32_SRC	= $(WIN32_SRC) .\win32io.c

+!ENDIF

+

+!IF "$(CRYPT_SRC)" != ""

+WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)

+!ENDIF

+

+DLL_SRC		= $(DYNALOADER).c

+

+X2P_SRC		=		\

+		..\x2p\a2p.c	\

+		..\x2p\hash.c	\

+		..\x2p\str.c	\

+		..\x2p\util.c	\

+		..\x2p\walk.c

+

+CORE_NOCFG_H	=		\

+		..\av.h		\

+		..\cop.h	\

+		..\cv.h		\

+		..\dosish.h	\

+		..\embed.h	\

+		..\form.h	\

+		..\gv.h		\

+		..\handy.h	\

+		..\hv.h		\

+		..\iperlsys.h	\

+		..\mg.h		\

+		..\nostdio.h	\

+		..\op.h		\

+		..\opcode.h	\

+		..\perl.h	\

+		..\perlapi.h	\

+		..\perlsdio.h	\

+		..\perlsfio.h	\

+		..\perly.h	\

+		..\pp.h		\

+		..\proto.h	\

+		..\regexp.h	\

+		..\scope.h	\

+		..\sv.h		\

+		..\thread.h	\

+		..\unixish.h	\

+		..\utf8.h	\

+		..\util.h	\

+		..\warnings.h	\

+		..\XSUB.h	\

+		..\EXTERN.h	\

+		..\perlvars.h	\

+		..\intrpvar.h	\

+		..\thrdvar.h	\

+		.\include\dirent.h	\

+		.\include\netdb.h	\

+		.\include\sys\socket.h	\

+		.\win32.h

+

+CORE_H		= $(CORE_NOCFG_H) .\config.h

+

+MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)

+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)

+WIN32_OBJ	= $(WIN32_SRC:.c=.obj)

+MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\

+		  $(MINIDIR)\miniperlmain$(o)	\

+		  $(MINIDIR)\perlio$(o)

+MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)

+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)

+DLL_OBJ		= $(DLL_SRC:.c=.obj)

+X2P_OBJ		= $(X2P_SRC:.c=.obj)

+

+PERLDLL_OBJ	= $(CORE_OBJ)

+PERLEXE_OBJ	= perlmain$(o)

+

+PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

+#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

+

+!IF "$(USE_SETARGV)" != ""

+SETARGV_OBJ	= setargv$(o)

+!ENDIF

+

+DYNALOADER		= $(EXTDIR)\DynaLoader\DynaLoader

+SOCKET			= $(EXTDIR)\Socket\Socket

+FCNTL			= $(EXTDIR)\Fcntl\Fcntl

+OPCODE			= $(EXTDIR)\Opcode\Opcode

+SDBM_FILE		= $(EXTDIR)\SDBM_File\SDBM_File

+IO			= $(EXTDIR)\IO\IO

+POSIX			= $(EXTDIR)\POSIX\POSIX

+ATTRS			= $(EXTDIR)\attrs\attrs

+THREAD			= $(EXTDIR)\Thread\Thread

+B			= $(EXTDIR)\B\B

+RE			= $(EXTDIR)\re\re

+DUMPER			= $(EXTDIR)\Data\Dumper\Dumper

+ERRNO			= $(EXTDIR)\Errno\Errno

+PEEK			= $(EXTDIR)\Devel\Peek\Peek

+BYTELOADER		= $(EXTDIR)\ByteLoader\ByteLoader

+DPROF			= $(EXTDIR)\Devel\DProf\DProf

+GLOB			= $(EXTDIR)\File\Glob\Glob

+HOSTNAME		= $(EXTDIR)\Sys\Hostname\Hostname

+STORABLE		= $(EXTDIR)\Storable\Storable

+FILTER			= $(EXTDIR)\Filter\Util\Call\Call

+ENCODE			= $(EXTDIR)\Encode\Encode

+MD5			= $(EXTDIR)\Digest\MD5\MD5

+PERLIOSCALAR		= $(EXTDIR)\PerlIO\Scalar\Scalar

+MIMEBASE64		= $(EXTDIR)\MIME\Base64\Base64

+TIMEHIRES		= $(EXTDIR)\Time\HiRes\HiRes

+CWD			= $(EXTDIR)\Cwd\Cwd

+LISTUTIL  		= $(EXTDIR)\List\Util\Util

+PERLIOVIA		= $(EXTDIR)\PerlIO\Via\Via

+XSTYPEMAP		= $(EXTDIR)\XS\Typemap\Typemap

+UNICODENORMALIZE	= $(EXTDIR)\Unicode\Normalize\Normalize

+

+SOCKET_DLL		= $(AUTODIR)\Socket\Socket.dll

+FCNTL_DLL		= $(AUTODIR)\Fcntl\Fcntl.dll

+OPCODE_DLL		= $(AUTODIR)\Opcode\Opcode.dll

+SDBM_FILE_DLL		= $(AUTODIR)\SDBM_File\SDBM_File.dll

+IO_DLL			= $(AUTODIR)\IO\IO.dll

+POSIX_DLL		= $(AUTODIR)\POSIX\POSIX.dll

+ATTRS_DLL		= $(AUTODIR)\attrs\attrs.dll

+THREAD_DLL		= $(AUTODIR)\Thread\Thread.dll

+B_DLL			= $(AUTODIR)\B\B.dll

+DUMPER_DLL		= $(AUTODIR)\Data\Dumper\Dumper.dll

+PEEK_DLL		= $(AUTODIR)\Devel\Peek\Peek.dll

+RE_DLL			= $(AUTODIR)\re\re.dll

+BYTELOADER_DLL		= $(AUTODIR)\ByteLoader\ByteLoader.dll

+DPROF_DLL		= $(AUTODIR)\Devel\DProf\DProf.dll

+GLOB_DLL		= $(AUTODIR)\File\Glob\Glob.dll

+HOSTNAME_DLL		= $(AUTODIR)\Sys\Hostname\Hostname.dll

+STORABLE_DLL		= $(AUTODIR)\Storable\Storable.dll

+FILTER_DLL		= $(AUTODIR)\Filter\Util\Call\Call.dll

+ENCODE_DLL		= $(AUTODIR)\Encode\Encode.dll

+MD5_DLL			= $(AUTODIR)\Digest\MD5\MD5.dll

+PERLIOSCALAR_DLL	= $(AUTODIR)\PerlIO\Scalar\Scalar.dll

+MIMEBASE64_DLL		= $(AUTODIR)\MIME\Base64\Base64.dll

+TIMEHIRES_DLL		= $(AUTODIR)\Time\HiRes\HiRes.dll

+CWD_DLL			= $(AUTODIR)\Cwd\Cwd.dll

+LISTUTIL_DLL		= $(AUTODIR)\List\Util\Util.dll

+PERLIOVIA_DLL		= $(AUTODIR)\PerlIO\Via\Via.dll

+XSTYPEMAP_DLL		= $(AUTODIR)\XS\Typemap\Typemap.dll

+UNICODENORMALIZE_DLL	= $(AUTODIR)\Unicode\Normalize\Normalize.dll

+

+EXTENSION_C	= 		\

+		$(SOCKET).c	\

+		$(FCNTL).c	\

+		$(OPCODE).c	\

+		$(SDBM_FILE).c	\

+		$(IO).c		\

+		$(POSIX).c	\

+		$(ATTRS).c	\

+		$(THREAD).c	\

+		$(RE).c		\

+		$(DUMPER).c	\

+		$(PEEK).c	\

+		$(B).c		\

+		$(BYTELOADER).c	\

+		$(DPROF).c	\

+		$(GLOB).c	\

+		$(HOSTNAME).c	\

+		$(STORABLE).c	\

+		$(FILTER).c	\

+		$(ENCODE).c	\

+		$(MD5).c	\

+		$(PERLIOSCALAR).c	\

+		$(MIMEBASE64).c	\

+		$(TIMEHIRES).c	\

+		$(CWD).c	\

+		$(LISTUTIL).c	\

+		$(PERLIOVIA).c	\

+		$(XSTYPEMAP).c	\

+		$(UNICODENORMALIZE).c

+

+EXTENSION_DLL	= 		\

+		$(SOCKET_DLL)	\

+		$(FCNTL_DLL)	\

+		$(OPCODE_DLL)	\

+		$(SDBM_FILE_DLL)\

+		$(IO_DLL)	\

+		$(POSIX_DLL)	\

+		$(ATTRS_DLL)	\

+		$(DUMPER_DLL)	\

+		$(PEEK_DLL)	\

+		$(B_DLL)	\

+		$(RE_DLL)	\

+		$(THREAD_DLL)	\

+		$(BYTELOADER_DLL)	\

+		$(DPROF_DLL)	\

+		$(GLOB_DLL)	\

+		$(HOSTNAME_DLL)	\

+		$(STORABLE_DLL)	\

+		$(FILTER_DLL)   \

+		$(ENCODE_DLL)   \

+		$(MD5_DLL)	\

+		$(PERLIOSCALAR_DLL) \

+		$(MIMEBASE64_DLL) \

+		$(TIMEHIRES_DLL)  \

+		$(CWD_DLL)	\

+		$(LISTUTIL_DLL)	\

+		$(PERLIOVIA_DLL)	\

+		$(XSTYPEMAP_DLL)	\

+		$(UNICODENORMALIZE_DLL)

+

+POD2HTML	= $(PODDIR)\pod2html

+POD2MAN		= $(PODDIR)\pod2man

+POD2LATEX	= $(PODDIR)\pod2latex

+POD2TEXT	= $(PODDIR)\pod2text

+

+CFG_VARS	=					\

+		"INST_DRV=$(INST_DRV)"			\

+		"INST_TOP=$(INST_TOP)"			\

+		"INST_VER=$(INST_VER)"			\

+		"INST_ARCH=$(INST_ARCH)"		\

+		"archname=$(ARCHNAME)"			\

+		"cc=$(CC)"				\

+		"ld=$(LINK32)"				\

+		"ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\

+		"cf_email=$(EMAIL)"	 		\

+		"d_crypt=$(D_CRYPT)"			\

+		"d_mymalloc=$(PERL_MALLOC)"		\

+		"libs=$(LIBFILES)"			\

+		"incpath=$(CCINCDIR:"=\")"		\

+		"libperl=$(PERLIMPLIB:..\=)"		\

+		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\

+		"libc=$(LIBC)"				\

+		"make=$(MAKE_BARE)"				\

+		"use5005threads=$(USE_5005THREADS)"	\

+		"useithreads=$(USE_ITHREADS)"		\

+		"usethreads=$(USE_5005THREADS)"		\

+		"usemultiplicity=$(USE_MULTI)"		\

+		"useperlio=$(USE_PERLIO)"		\

+		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\

+		"optimize=$(OPTIMIZE:"=\")"

+

+#

+# Top targets

+#

+

+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \

+	$(X2P) Extensions

+	@echo	Everything is up to date. '$(MAKE_BARE) test' to run test suite.

+

+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

+

+#------------------------------------------------------------

+

+$(GLOBEXE) : perlglob$(o)

+	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \

+	    perlglob$(o) setargv$(o)

+

+perlglob$(o)  : perlglob.c

+

+config.w32 : $(CFGSH_TMPL)

+	copy $(CFGSH_TMPL) config.w32

+

+.\config.h : $(CFGH_TMPL)

+	-del /f config.h

+	copy $(CFGH_TMPL) config.h

+

+..\config.sh : config.w32 $(MINIPERL) config_sh.PL

+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh

+

+# this target is for when changes to the main config.sh happen

+# edit config.{b,v,g}c and make this target once for each supported

+# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)

+regen_config_h:

+	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh

+	cd ..

+	-del /f perl.exe

+	perl configpm

+	cd win32

+	-del /f $(CFGH_TMPL)

+	-mkdir $(COREDIR)

+	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"

+	rename config.h $(CFGH_TMPL)

+

+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl

+	cd ..

+	miniperl configpm

+	cd win32

+	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)

+	$(XCOPY) ..\*.h $(COREDIR)\*.*

+	$(XCOPY) *.h $(COREDIR)\*.*

+	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*

+	$(RCOPY) include $(COREDIR)\*.*

+	-$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"

+	if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)

+

+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)

+	$(LINK32) -subsystem:console -out:$@ @<<

+	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)

+<<

+

+$(MINIDIR) :

+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

+

+$(MINICORE_OBJ) : $(CORE_NOCFG_H)

+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c

+

+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)

+	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c

+

+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c

+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

+!IF "$(USE_IMP_SYS)" == "define"

+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h

+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c

+!ENDIF

+

+# 1. we don't want to rebuild miniperl.exe when config.h changes

+# 2. we don't want to rebuild miniperl.exe with non-default config.h

+$(MINI_OBJ)	: $(CORE_NOCFG_H)

+

+$(WIN32_OBJ)	: $(CORE_H)

+$(CORE_OBJ)	: $(CORE_H)

+$(DLL_OBJ)	: $(CORE_H)

+$(X2P_OBJ)	: $(CORE_H)

+

+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl

+	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \

+	    CCTYPE=$(CCTYPE) > perldll.def

+

+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)

+	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<

+		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)

+<<

+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

+

+$(MINIMOD) : $(MINIPERL) ..\minimod.pl

+	cd ..

+	miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

+	cd win32

+

+..\x2p\a2p$(o) : ..\x2p\a2p.c

+	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

+

+..\x2p\hash$(o) : ..\x2p\hash.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

+

+..\x2p\str$(o) : ..\x2p\str.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

+

+..\x2p\util$(o) : ..\x2p\util.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

+

+..\x2p\walk$(o) : ..\x2p\walk.c

+	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

+

+$(X2P) : $(MINIPERL) $(X2P_OBJ)

+	$(MINIPERL) ..\x2p\find2perl.PL

+	$(MINIPERL) ..\x2p\s2p.PL

+	$(LINK32) -subsystem:console -out:$@ @<<

+		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)

+<<

+

+perlmain.c : runperl.c

+	copy runperl.c perlmain.c

+

+perlmain$(o) : perlmain.c

+	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

+

+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)

+	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \

+	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)

+	copy $(PERLEXE) $(WPERLEXE)

+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS

+	copy splittree.pl ..

+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

+

+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)

+	if not exist $(AUTODIR) mkdir $(AUTODIR)

+	cd $(EXTDIR)\$(*B)

+	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL

+	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL

+	cd ..\..\win32

+	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)

+	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)

+	cd $(EXTDIR)\$(*B)

+	$(XSUBPP) dl_win32.xs > $(*B).c

+	cd ..\..\win32

+

+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs

+	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

+

+#----------------------------------------------------------------------------------

+Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)

+	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)

+

+Extensions_clean: 

+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean

+

+#----------------------------------------------------------------------------------

+

+doc: $(PERLEXE)

+	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \

+	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \

+	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

+

+utils: $(PERLEXE) $(X2P)

+	cd ..\utils

+	$(MAKE) PERL=$(MINIPERL)

+	cd ..\pod

+	copy ..\README.aix      .\perlaix.pod

+	copy ..\README.amiga    .\perlamiga.pod

+	copy ..\README.apollo   .\perlapollo.pod

+	copy ..\README.beos     .\perlbeos.pod

+	copy ..\README.bs2000   .\perlbs2000.pod

+	copy ..\README.ce	.\perlce.pod

+	copy ..\README.cygwin   .\perlcygwin.pod

+	copy ..\README.dgux     .\perldgux.pod

+	copy ..\README.dos      .\perldos.pod

+	copy ..\README.epoc     .\perlepoc.pod

+	copy ..\README.hurd     .\perlhurd.pod

+	copy ..\README.hpux     .\perlhpux.pod

+	copy ..\README.machten  .\perlmachten.pod

+	copy ..\README.macos    .\perlmacos.pod

+	copy ..\README.mint     .\perlmint.pod

+	copy ..\README.mpeix    .\perlmpeix.pod

+	copy ..\README.netware  .\perlnetware.pod

+	copy ..\README.os2      .\perlos2.pod

+	copy ..\README.os390    .\perlos390.pod

+	copy ..\README.plan9    .\perlplan9.pod

+	copy ..\README.qnx      .\perlqnx.pod

+	copy ..\README.solaris  .\perlsolaris.pod

+	copy ..\README.tru64    .\perltru64.pod

+	copy ..\README.uts      .\perluts.pod

+	copy ..\README.vmesa    .\perlvmesa.pod

+	copy ..\vms\perlvms.pod .\perlvms.pod

+	copy ..\README.vos      .\perlvos.pod

+	copy ..\README.win32    .\perlwin32.pod

+	$(MAKE) -f ..\win32\pod.mak converters

+	cd ..\lib

+	$(PERLEXE) lib_pm.PL

+	cd ..\win32

+	$(PERLEXE) $(PL2BAT) $(UTILS)

+

+distclean: clean

+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \

+		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)

+	-del /f *.def *.map

+	-del /f $(EXTENSION_DLL)

+	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm

+	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs

+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm

+	-del /f $(LIBDIR)\XSLoader.pm

+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm

+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm

+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm

+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm

+	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm

+	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm

+	-del /f $(LIBDIR)\File\Glob.pm

+	-del /f $(LIBDIR)\Storable.pm

+	-del /f $(LIBDIR)\Filter\Util\Call.pm

+	-del /f $(LIBDIR)\Digest\MD5.pm

+	-del /f $(LIBDIR)\PerlIO\Scalar.pm

+	-del /f $(LIBDIR)\PerlIO\Via.pm

+	-del /f $(LIBDIR)\MIME\Base64.pm

+	-del /f $(LIBDIR)\MIME\QuotedPrint.pm

+	-del /f $(LIBDIR)\List\Util.pm

+	-del /f $(LIBDIR)\Scalar\Util.pm

+	-del /f $(LIBDIR)\Time\HiRes.pm

+	-del /f $(LIBDIR)\XS\Typemap.pm

+	-del /f $(LIBDIR)\Unicode\Normalize.pm

+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO

+	-rmdir /s $(LIBDIR)\IO

+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread

+	-rmdir /s $(LIBDIR)\Thread

+	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B

+	-rmdir /s $(LIBDIR)\B

+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data

+	-rmdir /s $(LIBDIR)\Data

+	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util

+	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest

+	-rmdir /s $(LIBDIR)\Digest

+	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME

+	-rmdir /s $(LIBDIR)\MIME

+	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List

+	-rmdir /s $(LIBDIR)\List

+	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar

+	-rmdir /s $(LIBDIR)\Scalar

+	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS

+	-rmdir /s $(LIBDIR)\XS

+	cd $(PODDIR)

+	-del /f *.html *.bat checkpods \

+	    perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \

+	    perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \

+	    perldos.pod perlepoc.pod perlhurd.pod \

+	    perlhpux.pod perlmachten.pod \

+	    perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \

+	    perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \

+	    perlsolaris.pod perltru64.pod perluts.pod \

+	    perlvmesa.pod perlvms.pod perlvos.pod \

+	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \

+	    podchecker podselect

+	cd ..\utils

+	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp

+	-del /f *.bat

+	cd ..\win32

+	cd ..\x2p

+	-del /f find2perl s2p

+	-del /f *.bat

+	cd ..\win32

+	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new

+	-del /f $(CONFIGPM)

+	-del /f bin\*.bat

+	cd $(EXTDIR)

+	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib

+	cd ..\win32

+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)

+	-rmdir /s $(AUTODIR)

+	-if exist $(COREDIR) rmdir /s /q $(COREDIR)

+	-rmdir /s $(COREDIR)

+

+install : all installbare installhtml

+

+installbare : utils

+	$(PERLEXE) ..\installperl

+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*

+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*

+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

+

+installhtml : doc

+	$(RCOPY) html\*.* $(INST_HTML)\*.*

+

+inst_lib : $(CONFIGPM)

+	copy splittree.pl ..

+	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

+	$(RCOPY) ..\lib $(INST_LIB)\*.*

+

+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils

+	$(XCOPY) $(MINIPERL) ..\t\perl.exe

+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

+	attrib -r ..\t\*.*

+	copy test ..\t

+	cd ..\t

+	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

+	cd ..\win32

+

+test-prep : all utils

+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)

+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)

+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

+

+test : test-prep

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+test-notty : test-prep

+	set PERL_SKIP_TTY_TEST=1

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+test-wide : test-prep

+	set HARNESS_PERL_SWITCHES=-C

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+test-wide-notty : test-prep

+	set PERL_SKIP_TTY_TEST=1

+	set HARNESS_PERL_SWITCHES=-C

+	cd ..\t

+	$(PERLEXE) -I..\lib harness

+	cd ..\win32

+

+clean : Extensions_clean

+	-@$(DEL) miniperlmain$(o)

+	-@$(DEL) $(MINIPERL)

+	-@$(DEL) perlglob$(o)

+	-@$(DEL) perlmain$(o)

+	-@$(DEL) config.w32

+	-@$(DEL) config.h

+	-@$(DEL) $(GLOBEXE)

+	-@$(DEL) $(PERLEXE)

+	-@$(DEL) $(WPERLEXE)

+	-@$(DEL) $(PERLDLL)

+	-@$(DEL) $(CORE_OBJ)

+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)

+	-rmdir /s $(MINIDIR)

+	-@$(DEL) $(WIN32_OBJ)

+	-@$(DEL) $(DLL_OBJ)

+	-@$(DEL) $(X2P_OBJ)

+	-@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res

+	-@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat

+	-@$(DEL) ..\x2p\*.exe ..\x2p\*.bat

+	-@$(DEL) *.ilk

+	-@$(DEL) *.pdb

+

+# Handy way to run perlbug -ok without having to install and run the

+# installed perlbug. We don't re-run the tests here - we trust the user.

+# Please *don't* use this unless all tests pass.

+# If you want to report test failures, use "nmake nok" instead.

+ok: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

+

+okfile: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

+

+nok: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"

+

+nokfile: utils

+	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok

diff --git a/win32/config_H.bc b/win32/config_H.bc
index a8b039b971..631e06d4b6 100644
--- a/win32/config_H.bc
+++ b/win32/config_H.bc
@@ -980,7 +980,7 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.7.2\\lib\\MSWin32-x86-multi-thread"		/**/
+#define ARCHLIB "c:\\perl\\5.7.3\\lib\\MSWin32-x86-multi-thread"		/**/
 /*#define ARCHLIB_EXP ""	/**/
 
 /* ARCHNAME:
@@ -1011,8 +1011,8 @@
  *	This symbol is the filename expanded version of the BIN symbol, for
  *	programs that do not want to deal with that at run-time.
  */
-#define BIN "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread"	/**/
-#define BIN_EXP "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread"	/**/
+#define BIN "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread"	/**/
+#define BIN_EXP "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread"	/**/
 
 /* PERL_BINCOMPAT_5005:
  *	This symbol, if defined, indicates that this version of Perl should be
@@ -2959,8 +2959,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "c:\\perl\\5.7.2\\lib"		/**/
-#define PRIVLIB_EXP (win32_get_privlib("5.7.2"))	/**/
+#define PRIVLIB "c:\\perl\\5.7.3\\lib"		/**/
+#define PRIVLIB_EXP (win32_get_privlib("5.7.3"))	/**/
 
 /* PTRSIZE:
  *	This symbol contains the size of a pointer, so that the C preprocessor
@@ -3063,7 +3063,7 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread"		/**/
+#define SITEARCH "c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread"		/**/
 /*#define SITEARCH_EXP ""	/**/
 
 /* SITELIB:
@@ -3086,8 +3086,8 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "c:\\perl\\site\\5.7.2\\lib"		/**/
-#define SITELIB_EXP (win32_get_sitelib("5.7.2"))	/**/
+#define SITELIB "c:\\perl\\site\\5.7.3\\lib"		/**/
+#define SITELIB_EXP (win32_get_sitelib("5.7.3"))	/**/
 #define SITELIB_STEM ""		/**/
 
 /* Size_t_size:
@@ -3324,7 +3324,7 @@
 /* PERL_XS_APIVERSION:
  *	This variable contains the version of the oldest perl binary
  *	compatible with the present perl.  perl.c:incpush() and
- *	lib/lib.pm will automatically search in c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread for older
+ *	lib/lib.pm will automatically search in c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread for older
  *	directories across major versions back to xs_apiversion.
  *	This is only useful if you have a perl library directory tree
  *	structured like the default one.
@@ -3343,7 +3343,7 @@
  *	compatible with the present perl.  (That is, pure perl modules
  *	written for pm_apiversion will still work for the current
  *	version).  perl.c:incpush() and lib/lib.pm will automatically
- *	search in c:\\perl\\site\\5.7.2\\lib for older directories across major versions
+ *	search in c:\\perl\\site\\5.7.3\\lib for older directories across major versions
  *	back to pm_apiversion.  This is only useful if you have a perl
  *	library directory tree structured like the default one.  The
  *	versioned site_perl library was introduced in 5.005, so that's
diff --git a/win32/config_H.gc b/win32/config_H.gc
index c15dba1c9c..2c39f80728 100644
--- a/win32/config_H.gc
+++ b/win32/config_H.gc
@@ -980,7 +980,7 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.7.2\\lib\\MSWin32-x86-multi-thread"		/**/
+#define ARCHLIB "c:\\perl\\5.7.3\\lib\\MSWin32-x86-multi-thread"		/**/
 /*#define ARCHLIB_EXP ""	/**/
 
 /* ARCHNAME:
@@ -1011,8 +1011,8 @@
  *	This symbol is the filename expanded version of the BIN symbol, for
  *	programs that do not want to deal with that at run-time.
  */
-#define BIN "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread"	/**/
-#define BIN_EXP "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread"	/**/
+#define BIN "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread"	/**/
+#define BIN_EXP "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread"	/**/
 
 /* PERL_BINCOMPAT_5005:
  *	This symbol, if defined, indicates that this version of Perl should be
@@ -2959,8 +2959,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "c:\\perl\\5.7.2\\lib"		/**/
-#define PRIVLIB_EXP (win32_get_privlib("5.7.2"))	/**/
+#define PRIVLIB "c:\\perl\\5.7.3\\lib"		/**/
+#define PRIVLIB_EXP (win32_get_privlib("5.7.3"))	/**/
 
 /* PTRSIZE:
  *	This symbol contains the size of a pointer, so that the C preprocessor
@@ -3063,7 +3063,7 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread"		/**/
+#define SITEARCH "c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread"		/**/
 /*#define SITEARCH_EXP ""	/**/
 
 /* SITELIB:
@@ -3086,8 +3086,8 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "c:\\perl\\site\\5.7.2\\lib"		/**/
-#define SITELIB_EXP (win32_get_sitelib("5.7.2"))	/**/
+#define SITELIB "c:\\perl\\site\\5.7.3\\lib"		/**/
+#define SITELIB_EXP (win32_get_sitelib("5.7.3"))	/**/
 #define SITELIB_STEM ""		/**/
 
 /* Size_t_size:
@@ -3324,7 +3324,7 @@
 /* PERL_XS_APIVERSION:
  *	This variable contains the version of the oldest perl binary
  *	compatible with the present perl.  perl.c:incpush() and
- *	lib/lib.pm will automatically search in c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread for older
+ *	lib/lib.pm will automatically search in c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread for older
  *	directories across major versions back to xs_apiversion.
  *	This is only useful if you have a perl library directory tree
  *	structured like the default one.
@@ -3343,7 +3343,7 @@
  *	compatible with the present perl.  (That is, pure perl modules
  *	written for pm_apiversion will still work for the current
  *	version).  perl.c:incpush() and lib/lib.pm will automatically
- *	search in c:\\perl\\site\\5.7.2\\lib for older directories across major versions
+ *	search in c:\\perl\\site\\5.7.3\\lib for older directories across major versions
  *	back to pm_apiversion.  This is only useful if you have a perl
  *	library directory tree structured like the default one.  The
  *	versioned site_perl library was introduced in 5.005, so that's
diff --git a/win32/config_H.vc b/win32/config_H.vc
index 58b22db890..e378f5a7ae 100644
--- a/win32/config_H.vc
+++ b/win32/config_H.vc
@@ -980,7 +980,7 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.7.2\\lib\\MSWin32-x86-multi-thread"		/**/
+#define ARCHLIB "c:\\perl\\5.7.3\\lib\\MSWin32-x86-multi-thread"		/**/
 /*#define ARCHLIB_EXP ""	/**/
 
 /* ARCHNAME:
@@ -1011,8 +1011,8 @@
  *	This symbol is the filename expanded version of the BIN symbol, for
  *	programs that do not want to deal with that at run-time.
  */
-#define BIN "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread"	/**/
-#define BIN_EXP "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread"	/**/
+#define BIN "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread"	/**/
+#define BIN_EXP "c:\\perl\\5.7.3\\bin\\MSWin32-x86-multi-thread"	/**/
 
 /* PERL_BINCOMPAT_5005:
  *	This symbol, if defined, indicates that this version of Perl should be
@@ -2959,8 +2959,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "c:\\perl\\5.7.2\\lib"		/**/
-#define PRIVLIB_EXP (win32_get_privlib("5.7.2"))	/**/
+#define PRIVLIB "c:\\perl\\5.7.3\\lib"		/**/
+#define PRIVLIB_EXP (win32_get_privlib("5.7.3"))	/**/
 
 /* PTRSIZE:
  *	This symbol contains the size of a pointer, so that the C preprocessor
@@ -3063,7 +3063,7 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread"		/**/
+#define SITEARCH "c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread"		/**/
 /*#define SITEARCH_EXP ""	/**/
 
 /* SITELIB:
@@ -3086,8 +3086,8 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "c:\\perl\\site\\5.7.2\\lib"		/**/
-#define SITELIB_EXP (win32_get_sitelib("5.7.2"))	/**/
+#define SITELIB "c:\\perl\\site\\5.7.3\\lib"		/**/
+#define SITELIB_EXP (win32_get_sitelib("5.7.3"))	/**/
 #define SITELIB_STEM ""		/**/
 
 /* Size_t_size:
@@ -3324,7 +3324,7 @@
 /* PERL_XS_APIVERSION:
  *	This variable contains the version of the oldest perl binary
  *	compatible with the present perl.  perl.c:incpush() and
- *	lib/lib.pm will automatically search in c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread for older
+ *	lib/lib.pm will automatically search in c:\\perl\\site\\5.7.3\\lib\\MSWin32-x86-multi-thread for older
  *	directories across major versions back to xs_apiversion.
  *	This is only useful if you have a perl library directory tree
  *	structured like the default one.
@@ -3343,7 +3343,7 @@
  *	compatible with the present perl.  (That is, pure perl modules
  *	written for pm_apiversion will still work for the current
  *	version).  perl.c:incpush() and lib/lib.pm will automatically
- *	search in c:\\perl\\site\\5.7.2\\lib for older directories across major versions
+ *	search in c:\\perl\\site\\5.7.3\\lib for older directories across major versions
  *	back to pm_apiversion.  This is only useful if you have a perl
  *	library directory tree structured like the default one.  The
  *	versioned site_perl library was introduced in 5.005, so that's