Re: Merge WinCE into Win32 directory and remove the the WinCE directory

Message-ID: <9b18b3110605011002m56c0db99n169ae677efb6d059@mail.gmail.com>

Plus adjustements to MANIFEST. Also, perlmain.c seemed to be missing
from the patch.

p4raw-id: //depot/perl@28061

1 files changed, 0 insertions, 971 deletions

diff --git a/wince/Makefile.ce b/wince/Makefile.ce
deleted file mode 100644
index 1becaaf241..0000000000
--- a/wince/Makefile.ce
+++ /dev/null
@@ -1,971 +0,0 @@
-# perl makefile for wince
-#
-# Time-stamp: <26/10/01 15:10:06 keuchel@keuchelnt>
-
-SRCDIR     = ..
-PV         = 59
-INST_VER   = 5.9.4
-
-# INSTALL_ROOT specifies a path where this perl will be installed on CE device
-INSTALL_ROOT=/netzwerk/sprache/perl
-INST_TOP=$(INSTALL_ROOT)
-INST_VER=
-
-# PERLCEDIR shoud be set to current directory
-PERLCEDIR  = H:\src\wince\perl\wince
-
-# WCEROOT is a directory where Windows CE Tools was installed
-WCEROOT    = D:\Windows CE Tools
-
-# HPERL stands for host perl, which is perl on local desktop machine
-# which is usually ..\miniperl.exe
-#HPERL     = N:\Programme\perl\bin\perl.exe
-HPERL = $(MAKEDIR)\..\miniperl.exe
-
-CEPATH     = D:\Programme\Microsoft eMbedded Tools\EVC\WCE211\BIN
-CELIBDLLDIR  = h:\src\wince\celib-palm-3.0
-CECONSOLEDIR = h:\src\wince\w32console
-
-# specify following options to build perl on local machine, by MSVC
-MSVCDIR         = D:\MSVStudio\VC98
-CCHOME		= $(MSVCDIR)
-CCINCDIR	= $(CCHOME)\include
-CCLIBDIR	= $(CCHOME)\lib
-
-# Only for WIN2000
-#YES        = /y
-COPY       = copy $(YES)
-XCOPY      = xcopy $(YES) /f /r /i /d
-RCOPY	   = xcopy $(YES) /f /r /i /e /d
-
-# cecopy program. Make shure it is in your path, as well as cemkdir, cedel
-CECOPY     = cecopy
-
-#
-# Comment out next assign to disable perl's I/O subsystem and use compiler's 
-# stdio for IO - depending on your compiler vendor and run time library you may 
-# then get a number of fails from make test i.e. bugs - complain to them not us ;-). 
-# You will also be unable to take full advantage of perl5.8's support for multiple 
-# encodings and may see lower IO performance. You have been warned.
-USE_PERLIO	= define
-
-#
-# set this if you wish to use perl's malloc
-# This will make perl run few times faster
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it.
-#
-PERL_MALLOC	= define
-
-
-NOOP	   = @echo
-# keep this untouched!
-NULL	   =
-
-
-#CFG=DEBUG
-CFG=RELEASE
-
-!if "$(MACHINE)" == ""
-MACHINE=wince-arm-hpc-wce300
-#MACHINE=wince-arm-hpc-wce211
-#MACHINE=wince-sh3-hpc-wce211
-#MACHINE=wince-mips-hpc-wce211
-#MACHINE=wince-sh3-hpc-wce200
-#MACHINE=wince-mips-hpc-wce200
-#MACHINE=wince-arm-pocket-wce300
-#MACHINE=wince-mips-pocket-wce300
-#MACHINE=wince-sh3-pocket-wce300
-#MACHINE=wince-x86em-pocket-wce300
-#MACHINE=wince-mips-palm-wce211
-#MACHINE=wince-sh3-palm-wce211
-#MACHINE=wince-x86em-palm-wce211
-!endif
-
-# set this to your email address
-#
-#EMAIL		=
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-######################################################################
-# machines
-
-!if "$(MACHINE)" == "wince-sh3-hpc-wce211"
-CC         = shcl.exe
-ARCH       = SH3
-CPU        = SH3
-TARGETCPU  = SH3
-CEVersion  = 211
-OSVERSION  = WCE211
-PLATFORM   = MS HPC Pro
-MCFLAGS    = -MDd -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 -DPALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.11
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-mips-hpc-wce211"
-CC         = clmips.exe
-ARCH       = MIPS
-CPU        = MIPS
-TARGETCPU  = MIPS
-CEVersion  = 211
-OSVERSION  = WCE211
-PLATFORM   = MS HPC Pro
-MCFLAGS    = -D _MT -D _DLL \
-             -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
-             -D PALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.11
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-mips-hpc-wce200"
-CC         = clmips.exe
-ARCH       = MIPS
-CPU        = MIPS
-TARGETCPU  = MIPS
-CEVersion  = 200
-OSVERSION  = WCE200
-PLATFORM   = MS HPC
-# MUST USE -MD to get the right FPE stuff...
-MCFLAGS    = -D _MT -D _DLL -MD \
-             -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
-             -D PALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.00
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-sh3-hpc-wce200"
-CC         = shcl.exe
-ARCH       = SH3
-CPU        = SH3
-TARGETCPU  = SH3
-CEVersion  = 200
-OSVERSION  = WCE200
-PLATFORM   = MS HPC
-# MUST USE -MD to get the right FPE stuff...
-MCFLAGS    = -D _MT -D _DLL -MD \
-             -D SH3 -D sh3 -D _SH3_ -D _sh3_ -D SHx -DPROCESSOR_SH3 \
-             -D PALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.00
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-arm-hpc-wce211"
-CC         = clarm.exe
-ARCH       = ARM
-CPU        = ARM
-TARGETCPU  = ARM
-CEVersion  = 211
-OSVERSION  = WCE211
-PLATFORM   = MS HPC Pro
-MCFLAGS    = -D _MT -D _DLL -D ARM -D arm -D _arm_ -D _ARM_ \
-             -DPROCESSOR_ARM -DPALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.11
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-arm-hpc-wce300"
-CC         = clarm.exe
-ARCH       = ARM
-CPU        = ARM
-TARGETCPU  = ARM
-CEVersion  = 300
-OSVERSION  = WCE300
-#PLATFORM   = HPC2000
-MCFLAGS    = -D _MT -D _DLL -D ARM -D arm -D _arm_ -D _ARM_ \
-             -DPROCESSOR_ARM -DPALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,3.00
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-mips-palm-wce211"
-CC         = clmips.exe
-ARCH       = MIPS
-CPU        = MIPS
-TARGETCPU  = MIPS
-CEVersion  = 211
-OSVERSION  = WCE211
-PLATFORM   = MS Palm Size PC
-MCFLAGS    = -DMIPS -D_MIPS_ -DPROCESSOR_MIPS -D PALM_SIZE -D _DLL -D _MT \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.11
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-sh3-palm-wce211"
-CC         = shcl.exe
-ARCH       = SH3
-CPU        = SH3
-TARGETCPU  = SH3
-CEVersion  = 211
-OSVERSION  = WCE211
-PLATFORM   = MS Palm Size PC
-MCFLAGS    = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 -DPALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-SUBSYS	   = -subsystem:windowsce,2.11
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-x86em-palm-wce211"
-CC         = cl.exe
-ARCH       = X86EM
-CPU        = X86
-TARGETCPU  = X86
-CEVersion  = 211
-OSVERSION  = WCE211
-PLATFORM   = MS Palm Size PC
-MCFLAGS    = -MDd -DX86 -D_X86_ -DPROCESSOR_X86 \
-             -D_WIN32_WCE_EMULATION -DPALM_SIZE \
-             -I $(CELIBDLLDIR)\inc
-MACH       = -machine:x86
-SUBSYS     = -subsystem:windows
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-x86em-pocket-wce300"
-CC         = cl.exe
-ARCH       = X86EM
-CPU        = X86
-TARGETCPU  = X86
-CEVersion  = 300
-OSVERSION  = WCE300
-PLATFORM   = MS Pocket PC
-MCFLAGS    = -DX86 -D_X86_ -DPROCESSOR_X86 -D _MT -D _DLL \
-             -D_WIN32_WCE_EMULATION -DPALM_SIZE -DPOCKET_SIZE \
-             -I $(CELIBDLLDIR)\inc 
-MACH       = -machine:x86
-SUBSYS     = -subsystem:windows
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-mips-pocket-wce300"
-CC         = clmips.exe
-ARCH       = MIPS
-CPU        = MIPS
-TARGETCPU  = MIPS
-CEVersion  = 300
-OSVERSION  = WCE300
-PLATFORM   = MS Pocket PC
-MCFLAGS    = -D MIPS -D mips -D _MIPS_ -D _mips_ -DPROCESSOR_MIPS \
-             -D _MT -D _DLL -DPALM_SIZE -DPOCKET_SIZE \
-             -I $(CELIBDLLDIR)\inc 
-MACH       = -machine:mips
-SUBSYS     = -subsystem:windowsce,3.00
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-#STDLIBPATH = $(WCEROOT)\$(OSVERSION)\$(PLATFORM)\lib\$(CPU)
-LDLIBPATH  = -libpath:$(CELIBPATH)
-#"-libpath:$(STDLIBPATH)"
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-sh3-pocket-wce300"
-CC         = shcl.exe
-ARCH       = SH3
-CPU        = SH3
-TARGETCPU  = SH3
-CEVersion  = 300
-OSVERSION  = WCE300
-PLATFORM   = MS Pocket PC
-MCFLAGS    = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 \
-             -DPALM_SIZE -DPOCKET_SIZE \
-             -I $(CELIBDLLDIR)\inc 
-MACH       = -machine:sh3
-SUBSYS     = -subsystem:windowsce,3.00
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-!if "$(MACHINE)" == "wince-arm-pocket-wce300"
-CC         = clarm.exe
-ARCH       = ARM
-CPU        = ARM
-TARGETCPU  = ARM
-CEVersion  = 300
-OSVERSION  = WCE300
-PLATFORM   = MS Pocket PC
-MCFLAGS    = -D ARM -D arm -D _ARM_ -D _arm_ -DPROCESSOR_ARM \
-             -D _MT -D _DLL -DPALM_SIZE -DPOCKET_SIZE \
-             -I $(CELIBDLLDIR)\inc 
-MACH       = -machine:arm
-SUBSYS     = -subsystem:windowsce,3.00
-CELIBPATH  = $(CELIBDLLDIR)\$(MACHINE)-release
-LDLIBPATH  = -libpath:$(CELIBPATH)
-STARTOBJS  = $(CECONSOLEDIR)/$(MACHINE)/wmain.obj \
-             $(CECONSOLEDIR)/$(MACHINE)/w32console.obj
-!endif
-
-######################################################################
-# common section
-
-CEDEFS    = -D_WINDOWS -D_WIN32_WCE=$(CEVersion) -DUNDER_CE=$(CEVersion) \
-            $(MCFLAGS) -D PERL
-
-#CEDEFS    = $(CEDEFS) -DDEBUGGING_OPS
-
-CECFLAGS  = $(CEDEFS)
-
-!if "$(CFG)" == "DEBUG"
-CECFLAGS  = $(CECFLAGS) -Zi -Od
-!endif
-
-!if "$(CFG)" == "RELEASE"
-# -O2 and -Ot give internal compiler error in perl.c and lexer.
-# Also the dll cannot be loaded by perl.exe...
-!if "$(CPU)" == "SH3"
-!else
-CECFLAGS  = $(CECFLAGS) -O2 -Ot
-!endif
-
-!endif
-
-RCDEFS    = /l 0x407 /r /d "UNICODE" /d UNDER_CE=$(CEVersion) \
-            /d _WIN32_WCE=$(CEVersion)
-
-PATH=$(CEPATH);$(PATH)
-
-INCLUDE=$(WCEROOT)\$(OSVERSION)\$(PLATFORM)\include
-LIB=$(WCEROOT)\$(OSVERSION)\$(PLATFORM)\lib\$(ARCH)
-
-######################################################################
-
-!message
-!message Compiling for $(MACHINE)
-!message LIB=$(LIB)
-!message INCLUDE=$(INCLUDE)
-!message PATH=$(CEPATH)
-!message
-
-######################################################################
-#
-# Additional compiler flags can be specified here.
-#
-
-BUILDOPT	= $(BUILDOPT) $(CECFLAGS)
-
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT		= undef
-!ELSE
-D_CRYPT		= define
-CRYPT_FLAG	= -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC	= undef
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI	= undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS	= undef
-!ENDIF
-
-!IF "$(USE_PERLIO)" == ""
-USE_PERLIO	= undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT	= undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
-USE_MULTI	= define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
-USE_MULTI	= define
-!ENDIF
-
-!IF "$(USE_MULTI)" != "undef"
-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(USE_PERLIO)" == "define"
-BUILDOPT	= $(BUILDOPT) -DUSE_PERLIO
-!ENDIF
-
-!IF "$(CROSS_NAME)" == ""
-CROSS_NAME	= $(MACHINE)
-!ENDIF
-
-# new option - automatically defined in perl.h...
-#BUILDOPT        = $(BUILDOPT) -DUSE_ENVIRON_ARRAY
-
-PROCESSOR_ARCHITECTURE = $(TARGETCPU)
-ARCHNAME	= $(PLATFORM)-$(OSVERSION)-$(PROCESSOR_ARCHITECTURE)
-ARCHDIR		= ..\lib\$(ARCHNAME)
-COREDIR		= ..\lib\CORE
-XCOREDIR	= ..\xlib\$(CROSS_NAME)\CORE
-AUTODIR		= ..\lib\auto
-LIBDIR		= ..\lib
-EXTDIR		= ..\ext
-PODDIR		= ..\pod
-EXTUTILSDIR	= $(LIBDIR)\ExtUtils
-
-LINK32		= link
-LIB32		= $(LINK32) -lib
-RSC		= rc
-
-INCLUDES	= -I.\include -I..\win32\include -I. -I..
-DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) $(CECFLAGS)
-LOCDEFS		= -DPERLDLL -DPERL_CORE
-CXX_FLAG	= -TP
-
-PERLEXE_RES	= perl.res
-PERLDLL_RES	=
-
-!if "$(CFG)" == "RELEASE"
-CELIB           = celib.lib
-!endif
-
-!if "$(CFG)" == "DEBUG"
-CELIB           = celib.lib
-!endif
-
-CELIBS          = -nodefaultlib \
-                  winsock.lib $(CELIB) coredll.lib
-
-!if $(CEVersion) > 200
-CELIBS          = $(CELIBS) corelibc.lib 
-!else
-CELIBS          = $(CELIBS) msvcrt.lib 
-!endif
-
-LIBBASEFILES	= $(CRYPT_LIB) $(CELIBS)
-
-LIBFILES	= $(LIBBASEFILES) $(LIBC)
-
-CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-		$(PCHFLAGS) $(OPTIMIZE)
-
-LINK_FLAGS	= -nologo -machine:$(PROCESSOR_ARCHITECTURE)
-
-!if "$(CFG)" == "DEBUG"
-LINK_FLAGS      = $(LINK_FLAGS) -debug:full -pdb:none 
-!else
-LINK_FLAGS      = $(LINK_FLAGS) -release 
-!endif
-
-OBJOUT_FLAG	= -Fo
-EXEOUT_FLAG	= -Fe
-
-CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
-
-o = .obj
-
-#
-# Rules
-# 
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
-	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
-	$(NOOP)
-
-$(o).dll:
-	$(LINK32) -dll $(SUBSYS) $(LDLIBPATH) \
-            -implib:$(*B).lib -def:$(*B).def \
-	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  
-
-.rc.res:
-	$(RSC) -i.. $<
-
-# This must be relative to ../lib/CORE, else the ext dll build fails...
-PERLIMPLIB_EXP	= ..\..\..\xlib\$(CROSS_NAME)\CORE\perl$(PV).lib
-PERLIMPLIB	= $(PERLCEDIR)\$(MACHINE)\perl$(PV).lib
-PERLDLL		= $(MACHINE)\perl$(PV).dll
-
-DLLDIR          = $(MACHINE)\dll
-PERLEXE		= $(MACHINE)\perl.exe
-
-CONFIGPM	= ..\xlib\$(CROSS_NAME)\Config.pm
-MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
-
-# Unicode data files generated by mktables
-UNIDATAFILES	 = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
-		   ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
-		   ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
-		   ..\lib\unicore\PVA.pl
-
-# Directories of Unicode data files generated by mktables
-UNIDATADIR1	= ..\lib\unicore\To
-UNIDATADIR2	= ..\lib\unicore\lib
-
-# Nominate a target which causes extensions to be re-built
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend
-# on and really only the interface - i.e. the .def file used to export symbols
-# from the .dll
-PERLDEP		= perldll.def
-
-MAKE		= nmake -nologo
-
-CFGSH_TMPL	= config.ce
-CFGH_TMPL	= config_H.ce
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP		= $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) ..\$(EXTUTILSDIR)\xsubpp \
-		-C++ -prototypes
-
-MICROCORE_SRC	=		\
-		..\av.c		\
-		..\deb.c	\
-		..\doio.c	\
-		..\doop.c	\
-		..\dump.c	\
-		..\globals.c	\
-		..\gv.c		\
-		..\hv.c		\
-		..\mg.c		\
-		..\op.c		\
-		..\pad.c	\
-		..\perl.c	\
-		..\perlapi.c	\
-		..\perly.c	\
-		..\pp.c		\
-		..\pp_ctl.c	\
-		..\pp_hot.c	\
-		..\pp_pack.c	\
-		..\pp_sort.c	\
-		..\pp_sys.c	\
-		..\reentr.c	\
-		..\regcomp.c	\
-		..\regexec.c	\
-		..\run.c	\
-		..\scope.c	\
-		..\sv.c		\
-		..\taint.c	\
-		..\toke.c	\
-		..\universal.c	\
-		..\utf8.c	\
-		..\util.c	\
-		..\xsutils.c
-
-EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c .\win32io.c
-
-WIN32_SRC	=		\
-		.\wince.c	\
-		.\wincesck.c	\
-		.\win32thread.c 
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC		= $(DYNALOADER).c
-
-CORE_NOCFG_H	=		\
-		..\av.h		\
-		..\cop.h	\
-		..\cv.h		\
-		..\dosish.h	\
-		..\embed.h	\
-		..\form.h	\
-		..\gv.h		\
-		..\handy.h	\
-		..\hv.h		\
-		..\iperlsys.h	\
-		..\mg.h		\
-		..\nostdio.h	\
-		..\op.h		\
-		..\opcode.h	\
-		..\perl.h	\
-		..\perlapi.h	\
-		..\perlsdio.h	\
-		..\perlsfio.h	\
-		..\perly.h	\
-		..\pp.h		\
-		..\proto.h	\
-		..\regexp.h	\
-		..\scope.h	\
-		..\sv.h		\
-		..\thread.h	\
-		..\unixish.h	\
-		..\utf8.h	\
-		..\util.h	\
-		..\warnings.h	\
-		..\XSUB.h	\
-		..\EXTERN.h	\
-		..\perlvars.h	\
-		..\intrpvar.h	\
-		..\thrdvar.h	\
-		.\include\dirent.h	\
-		.\include\netdb.h	\
-		.\include\sys\socket.h	\
-		.\win32.h
-
-CORE_H		= $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
-#WIN32_OBJ	= $(WIN32_OBJ:.\=.\$(DLLDIR)\)
-MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\$(DLLDIR)\)	\
-		  $(MINIDIR)\miniperlmain$(o)	\
-		  $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\$(DLLDIR)\)
-MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ		= $(DLL_SRC:.c=.obj)
-X2P_OBJ		= $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ	= $(CORE_OBJ)
-PERLEXE_OBJ	= perlmain$(o)
-
-PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ	= setargv$(o)
-!ENDIF
-
-DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
-		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
-		Sys/Hostname
-
-STATIC_EXT	= DynaLoader
-
-DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
-
-ERRNO_PM	= $(LIBDIR)\Errno.pm
-
-
-EXTENSION_PM	=		\
-		$(ERRNO_PM)
-
-POD2HTML	= $(PODDIR)\pod2html
-POD2MAN		= $(PODDIR)\pod2man
-POD2LATEX	= $(PODDIR)\pod2latex
-POD2TEXT	= $(PODDIR)\pod2text
-
-CFG_VARS = \
- "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" \
- "INST_VER=$(INST_VER)" \
- "INST_ARCH=$(INST_ARCH)" \
- "archname=$(ARCHNAME)" \
- "CC=$(CC)" \
- "ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
- "cppflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
- "cf_by=vkon" \
- "cf_email=$(EMAIL)" \
- "d_crypt=$(D_CRYPT)" \
- "d_mymalloc=$(PERL_MALLOC)" \
- "libs=$(LIBFILES)" \
- "incpath=$(CCINCDIR)" \
- "libperl=$(PERLIMPLIB_EXP)" \
- "libpth=$(LIBPATH)" \
- "libc=$(LIBC)" \
- "make=nmake" \
- "static_ext=$(STATIC_EXT)" \
- "dynamic_ext=$(DYNAMIC_EXT)" \
- "useithreads=$(USE_ITHREADS)" \
- "usemultiplicity=$(USE_MULTI)" \
- "useperlio=$(USE_PERLIO)" \
- "LINK_FLAGS=$(LDLIBPATH) $(LINK_FLAGS) $(SUBSYS)" \
- "optimize=$(OPTIMIZE)"
-
-#
-# Top targets
-#
-
-all: hostminiperl $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) Extensions
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-$(CONFIGPM): .\config.h ..\config.sh ..\minimod.pl
-	cd .. && $(HPERL) configpm --cross=$(CROSS_NAME) --no-glossary
-	-mkdir $(XCOREDIR)
-	$(XCOPY) ..\*.h $(XCOREDIR)\*.*
-	$(XCOPY) ..\*.inc $(XCOREDIR)\*.*
-	$(XCOPY) *.h $(XCOREDIR)\*.*
-	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
-	$(RCOPY) include $(XCOREDIR)\*.*
-	$(XCOPY) ..\win32\include $(XCOREDIR)\*.*
-	$(HPERL) -I..\lib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(XCOREDIR)"
-
-.\config.h:
-	-del /f config.h
-	copy config_H.ce config.h
-
-..\config.sh: config.ce config_sh.PL
-	$(HPERL) -I..\lib -I..\win32 config_sh.PL $(CFG_VARS) config.ce > ..\config.sh
-
-$(MINIMOD) : ..\minimod.pl
-	cd .. && $(HPERL) minimod.pl > lib\ExtUtils\Miniperl.pm
-
-perlmain.c : runperl.c 
-	$(COPY) runperl.c perlmain.c
-
-$(DYNALOADER).c: $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
-	if not exist $(AUTODIR) mkdir $(AUTODIR)
-	cd $(EXTDIR)\$(*B)
-	$(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL
-	$(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL
-	cd ..\..\wince
-	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
-	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
-	cd $(EXTDIR)\$(*B)
-	$(XSUBPP) dl_win32.xs > $(*B).c
-	cd ..\..\wince
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
-	$(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-#----------------------------------------------------------------------------------
-NOT_COMPILE_EXT =
-!if "$(MACHINE)" == "wince-sh3-palm-wce211"
-NOT_COMPILE_EXT = $(NOT_COMPILE_EXT) !XS/Typemap
-!endif
-!if "$(MACHINE)" == "wince-mips-palm-wce211"
-NOT_COMPILE_EXT = $(NOT_COMPILE_EXT) !XS/Typemap
-!endif
-
-Extensions: ..\win32\buildext.pl $(PERLDEP) $(CONFIGPM)
-	$(HPERL) -I..\lib -I..\win32 -MCross=$(CROSS_NAME) ..\win32\buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) \
-	!POSIX $(NOT_COMPILE_EXT)
-
-Extensions_clean: 
-	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-
-#----------------------------------------------------------------------------------
-
-$(PERLEXE_RES): perl.rc perl.ico
-	rc $(RCDEFS) perl.rc
-
-clean: 
-	-rm -f $(MACHINE)/dll/*
-	-rm -f $(MACHINE)/*.obj
-	-rm -f $(MACHINE)/*.exe
-	-rm -f $(MACHINE)/*.dll
-	-rm -f $(MACHINE)/*.lib
-	-rm -f ../config.sh ../lib/Config.pm
-	-rm -f config.h perl.res
-
-XDLLOBJS = \
-$(DLLDIR)\av.obj \
-$(DLLDIR)\deb.obj \
-$(DLLDIR)\doio.obj \
-$(DLLDIR)\doop.obj \
-$(DLLDIR)\dump.obj \
-$(DLLDIR)\globals.obj \
-$(DLLDIR)\gv.obj \
-$(DLLDIR)\hv.obj \
-$(DLLDIR)\locale.obj \
-$(DLLDIR)\mathoms.obj \
-$(DLLDIR)\mg.obj \
-$(DLLDIR)\numeric.obj \
-$(DLLDIR)\op.obj \
-$(DLLDIR)\pad.obj \
-$(DLLDIR)\perl.obj \
-$(DLLDIR)\perlapi.obj \
-$(DLLDIR)\perlio.obj \
-$(DLLDIR)\perly.obj \
-$(DLLDIR)\pp.obj \
-$(DLLDIR)\pp_ctl.obj \
-$(DLLDIR)\pp_hot.obj \
-$(DLLDIR)\pp_pack.obj \
-$(DLLDIR)\pp_sort.obj \
-$(DLLDIR)\pp_sys.obj \
-$(DLLDIR)\reentr.obj \
-$(DLLDIR)\regcomp.obj \
-$(DLLDIR)\regexec.obj \
-$(DLLDIR)\run.obj \
-$(DLLDIR)\scope.obj \
-$(DLLDIR)\sv.obj \
-$(DLLDIR)\taint.obj \
-$(DLLDIR)\toke.obj \
-$(DLLDIR)\universal.obj \
-$(DLLDIR)\utf8.obj \
-$(DLLDIR)\util.obj \
-$(DLLDIR)\win32thread.obj \
-$(DLLDIR)\wince.obj \
-$(DLLDIR)\win32io.obj \
-$(DLLDIR)\wincesck.obj \
-$(DLLDIR)\xsutils.obj \
-$(DLLDIR)\perllib.obj \
-$(DLLDIR)\DynaLoader.obj
-!IF "$(PERL_MALLOC)" == "define"
-XDLLOBJS	= $(XDLLOBJS) $(DLLDIR)\malloc.obj
-!ENDIF
-!IF "$(CRYPT_SRC)" != ""
-XDLLOBJS	= $(XDLLOBJS) $(DLLDIR)\fcrypt.obj
-!ENDIF
-
-{$(SRCDIR)}.c{$(DLLDIR)}.obj:
-    $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
-
-# compiler explains that it will optimize toke.c if we'll give it an
-# option -QMOb<num> with num>=4178
-$(DLLDIR)\toke.obj:
-    $(CC) -c $(CFLAGS_O) -QMOb9000 -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ ..\toke.c
-
-{$(SRCDIR)/wince}.c{$(DLLDIR)}.obj:
-    $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)" == "define"
-$(DLLDIR)\perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
-	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-	rem (frustrated) mv perllib.obj $(DLLDIR)
-!ENDIF
-
-perldll.def : $(HPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
-	$(HPERL) -w ..\makedef.pl PLATFORM=wince $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
-	    CCTYPE=$(CCTYPE) -DPERL_DLL=$(PERLDLL) > perldll.def
-
-$(PERLDLL) : $(DLLDIR) perldll.def $(XDLLOBJS) $(PERLDLL_RES)
-	$(LINK32) -dll -def:perldll.def -out:$@ \
-                  $(SUBSYS) $(LDLIBPATH) \
-		  $(LINK_FLAGS) $(LIBFILES) \
-		  $(XDLLOBJS) $(PERLDLL_RES)
-
-$(DLLDIR) :
-	if not exist "$(DLLDIR)" mkdir "$(DLLDIR)"
-
-$(DLLDIR)\DynaLoader.obj: $(EXTDIR)\DynaLoader\DynaLoader.c
-    $(CC) -c $(CFLAGS_O) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ \
-          $(EXTDIR)\DynaLoader\DynaLoader.c
-
-XPERLEXEOBJS = \
-$(MACHINE)\perlmain.obj
-
-$(PERLEXE) : $(PERLDLL) $(CONFIGPM) $(XPERLEXEOBJS) $(PERLEXE_RES) $(STARTOBJS)
-	$(XCOPY) $(MACHINE)\*.lib $(XCOREDIR)
-	$(LINK32) $(SUBSYS) $(LDLIBPATH) \
-            -entry:wWinMainCRTStartup \
-            -out:$(MACHINE)\perl.exe \
-            -stack:0x100000 $(LINK_FLAGS) $(STARTOBJS) $(XPERLEXEOBJS) \
-            $(PERLIMPLIB) $(PERLEXE_RES) $(LIBFILES)
-
-$(MACHINE)\perlmain.obj : perlmain.c
-	$(CC) $(CFLAGS_O) -UPERLDLL -Fo$(MACHINE)\ -c perlmain.c
-
-iodll:     $(IO_DLL)
-socketdll: $(SOCKET_DLL)
-dumperdll: $(DUMPER_DLL)
-
-dlls: socketdll iodll dumperdll
-	-xmkdir -p $(MACHINE)/lib/auto/IO
-	cp ../lib/auto/IO/IO.bs $(MACHINE)/lib/auto/IO
-	cp ../lib/auto/IO/IO.dll $(MACHINE)/lib/auto/IO
-	-xmkdir $(MACHINE)/lib/auto/Socket
-	cp ../lib/auto/Socket/Socket.bs $(MACHINE)/lib/auto/Socket
-	cp ../lib/auto/Socket/Socket.dll $(MACHINE)/lib/auto/Socket
-	-xmkdir -p $(MACHINE)/lib/auto/Data/Dumper
-	cp ../lib/auto/Data/Dumper/Dumper.bs $(MACHINE)/lib/auto/Data/Dumper
-	cp ../lib/auto/Data/Dumper/Dumper.dll $(MACHINE)/lib/auto/Data/Dumper
-
-makedist: all dlls
-	$(COPY) $(CELIBPATH)\celib.dll $(MACHINE)
-	cp perl.txt $(MACHINE)
-	cp registry.bat $(MACHINE)
-	cp ../lib/Config.pm $(MACHINE)/lib
-	cd $(MACHINE)
-	rm -f perl-$(MACHINE).tar.gz
-	sh -c "tar cf perl-$(MACHINE).tar *.exe *.dll *.txt *.bat lib"
-	gzip -9 perl-$(MACHINE).tar
-	mv perl-$(MACHINE).tar.gz h:/freenet/new
-	cd ..
-
-install: all
-	-cemkdir "$(INSTALL_ROOT)"
-	-cemkdir "$(INSTALL_ROOT)\bin"
-	-cemkdir "$(INSTALL_ROOT)\lib"
-	$(CECOPY) "pc:$(MACHINE)/perl.exe" "ce:$(INSTALL_ROOT)/bin"
-	$(CECOPY) "pc:$(MACHINE)/perl$(PV).dll" "ce:$(INSTALL_ROOT)/bin"
-	$(CECOPY) "pc:../xlib/$(CROSS_NAME)/Config.pm" "ce:$(INSTALL_ROOT)/lib"
-
-$(UNIDATAFILES) : $(HPERL) $(CONFIGPM) ..\lib\unicore\mktables
-	cd ..\lib\unicore && \
-	$(HPERL) -I.. mktables
-
-dist: all
-	$(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME)
-
-zipdist: all
-	$(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME)
-	$(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME) --zip
-
-zip:
-	$(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME) --cross-name=$(CROSS_NAME) --zip
-
-perl.ico:
-	$(HPERL) makeico.pl
-
-hostminiperl: ..\miniperl.exe
-
-..\miniperl.exe:
-	cd ../win32
-	set PATH=$(CCHOME)\bin;$(PATH)
-	$(MAKE) -f Makefile "CCHOME=$(MSVCDIR)" "CCINCDIR=$(CCHOME)\include" "CCLIBDIR=$(CCHOME)\lib" "INCLUDE=$(CCHOME)\include" "LIB=$(CCHOME)\lib" "LINK_FLAGS=" .\config.h ..\miniperl.exe
-	cd ../wince
-
-host-install:
-	perl -MConfig -MExtUtils::Install -we "install({'../lib/CORE', qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)/CORE#},1)"
-	perl -MConfig -MExtUtils::Install -we "install({'../xlib/$(CROSS_NAME)', qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)#},1)"
-	perl -MConfig -MFile::Copy -we "copy qq#./$(MACHINE)/perl$(PV).lib#, qq#$$Config{installprefixexp}/xlib/$(CROSS_NAME)/CORE#"
-	perl -MConfig -MFile::Copy -we "copy qq#../lib/Cross.pm#, qq#$$Config{installprefixexp}/lib#"
-	perl -MConfig -we "system qq#perl -pi.bak -we \"s{((arch^|priv)libexp)='.*'}{\$$1='# . \
-	 quotemeta($$Config{installprefixexp}) . \
-	 qq#/xlib/$(CROSS_NAME)'}\" $$Config{installprefixexp}/xlib/$(CROSS_NAME)/Config.pm#"