diff options
| -rw-r--r-- | MANIFEST | 1 | ||||
| -rwxr-xr-x | Makefile.SH | 8 | ||||
| -rw-r--r-- | pod/.gitignore | 2 | ||||
| -rw-r--r-- | pod/perl.pod | 1 | ||||
| -rw-r--r-- | pod/perl52711delta.pod | 256 | ||||
| -rw-r--r-- | pod/perldelta.pod | 332 | ||||
| -rw-r--r-- | vms/descrip_mms.template | 2 | ||||
| -rw-r--r-- | win32/GNUmakefile | 4 | ||||
| -rw-r--r-- | win32/Makefile | 4 | ||||
| -rw-r--r-- | win32/makefile.mk | 4 | ||||
| -rw-r--r-- | win32/pod.mak | 4 |
11 files changed, 534 insertions, 84 deletions
@@ -5070,6 +5070,7 @@ pod/perl5261delta.pod Perl changes in version 5.26.1 pod/perl5262delta.pod Perl changes in version 5.26.2 pod/perl5270delta.pod Perl changes in version 5.27.0 pod/perl52710delta.pod Perl changes in version 5.27.10 +pod/perl52711delta.pod Perl changes in version 5.27.11 pod/perl5271delta.pod Perl changes in version 5.27.1 pod/perl5272delta.pod Perl changes in version 5.27.2 pod/perl5273delta.pod Perl changes in version 5.27.3 diff --git a/Makefile.SH b/Makefile.SH index cecc53f29b..623afa325a 100755 --- a/Makefile.SH +++ b/Makefile.SH @@ -575,7 +575,7 @@ esac $spitshell >>$Makefile <<'!NO!SUBS!' -perltoc_pod_prereqs = extra.pods pod/perl52711delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod +perltoc_pod_prereqs = extra.pods pod/perl52712delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs) generated_headers = uudmap.h bitcount.h mg_data.h @@ -1125,9 +1125,9 @@ pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST $(MINIPERL) pod/perlmodlib.PL -q -pod/perl52711delta.pod: pod/perldelta.pod - $(RMS) pod/perl52711delta.pod - $(LNS) perldelta.pod pod/perl52711delta.pod +pod/perl52712delta.pod: pod/perldelta.pod + $(RMS) pod/perl52712delta.pod + $(LNS) perldelta.pod pod/perl52712delta.pod extra.pods: $(MINIPERL_EXE) -@test ! -f extra.pods || rm -f `cat extra.pods` diff --git a/pod/.gitignore b/pod/.gitignore index 943db16b7e..d3ff0526a8 100644 --- a/pod/.gitignore +++ b/pod/.gitignore @@ -50,7 +50,7 @@ /roffitall # generated -/perl52711delta.pod +/perl52712delta.pod /perlapi.pod /perlintern.pod /perlmodlib.pod diff --git a/pod/perl.pod b/pod/perl.pod index 29d88a6c89..4ce0c226c4 100644 --- a/pod/perl.pod +++ b/pod/perl.pod @@ -181,6 +181,7 @@ aux h2ph h2xs perlbug pl2pm pod2html pod2man splain xsubpp perlhist Perl history records perldelta Perl changes since previous version + perl52711delta Perl changes in version 5.27.11 perl52710delta Perl changes in version 5.27.10 perl5279delta Perl changes in version 5.27.9 perl5278delta Perl changes in version 5.27.8 diff --git a/pod/perl52711delta.pod b/pod/perl52711delta.pod new file mode 100644 index 0000000000..4a8bceffe1 --- /dev/null +++ b/pod/perl52711delta.pod @@ -0,0 +1,256 @@ +=encoding utf8 + +=head1 NAME + +perl52711delta - what is new for perl v5.27.11 + +=head1 DESCRIPTION + +This document describes differences between the 5.27.10 release and the 5.27.11 +release. + +If you are upgrading from an earlier release such as 5.27.9, first read +L<perl52710delta>, which describes differences between 5.27.9 and 5.27.10. + +=head1 Security + +=head2 [CVE-2017-12837] Heap buffer overflow in regular expression compiler + +Compiling certain regular expression patterns with the case-insensitive +modifier could cause a heap buffer overflow and crash perl. This has now been +fixed. +L<[perl #131582]|https://rt.perl.org/Public/Bug/Display.html?id=131582> + +=head2 [CVE-2017-12883] Buffer over-read in regular expression parser + +For certain types of syntax error in a regular expression pattern, the error +message could either contain the contents of a random, possibly large, chunk of +memory, or could crash perl. This has now been fixed. +L<[perl #131598]|https://rt.perl.org/Public/Bug/Display.html?id=131598> + +=head2 [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows + +A possible stack buffer overflow in the C<%ENV> code on Windows has been fixed +by removing the buffer completely since it was superfluous anyway. +L<[perl #131665]|https://rt.perl.org/Public/Bug/Display.html?id=131665> + +=head1 Performance Enhancements + +=over 4 + +=item * + +The start up overhead for creating regular expression patterns with +Unicode properties (C<\p{...}>) has been greatly reduced in most cases. + +=back + +=head1 Modules and Pragmata + +=head2 Updated Modules and Pragmata + +=over 4 + +=item * + +L<bytes> has been upgraded from version 1.05 to 1.06. + +=item * + +L<Carp> has been upgraded from version 1.49 to 1.50. + +=item * + +L<Devel::PPPort> has been upgraded from version 3.39 to 3.40. + +=item * + +L<Exporter> has been upgraded from version 5.72 to 5.73. + +=item * + +L<ExtUtils::Constant> has been upgraded from version 0.24 to 0.25. + +=item * + +L<I18N::Langinfo> has been upgraded from version 0.16 to 0.17. + +=item * + +L<IO> has been upgraded from version 1.38 to 1.39. + +=item * + +L<Module::CoreList> has been upgraded from version 5.20180221 to 5.20180420. + +=item * + +L<POSIX> has been upgraded from version 1.83 to 1.84. + +=item * + +L<subs> has been upgraded from version 1.02 to 1.03. + +=item * + +L<Time::HiRes> has been upgraded from version 1.9757 to 1.9759. + +=item * + +L<vars> has been upgraded from version 1.03 to 1.04. + +=item * + +L<version> has been upgraded from version 0.9918 to 0.9923. + +=back + +=head1 Documentation + +XXX Changes to files in F<pod/> go here. Consider grouping entries by +file and be sure to link to the appropriate page, e.g. L<perlfunc>. + +=head2 New Documentation + +XXX Changes which create B<new> files in F<pod/> go here. + +=head3 L<XXX> + +XXX Description of the purpose of the new file here + +=head2 Changes to Existing Documentation + +We have attempted to update the documentation to reflect the changes +listed in this document. If you find any we have missed, send email +to L<perlbug@perl.org|mailto:perlbug@perl.org>. + +XXX Changes which significantly change existing files in F<pod/> go here. +However, any changes to F<pod/perldiag.pod> should go in the L</Diagnostics> +section. + +Additionally, the following selected changes have been made: + +=head3 L<XXX> + +=over 4 + +=item * + +XXX Description of the change here + +=back + +=head1 Diagnostics + +The following additions or changes have been made to diagnostic output, +including warnings and fatal error messages. For the complete list of +diagnostic messages, see L<perldiag>. + +XXX New or changed warnings emitted by the core's C<C> code go here. Also +include any changes in L<perldiag> that reconcile it to the C<C> code. + +=head2 New Diagnostics + +XXX Newly added diagnostic messages go under here, separated into New Errors +and New Warnings + +=head3 New Errors + +=over 4 + +=item * + +XXX L<message|perldiag/"message"> + +=back + +=head3 New Warnings + +=over 4 + +=item * + +XXX L<message|perldiag/"message"> + +=back + +=head2 Changes to Existing Diagnostics + +XXX Changes (i.e. rewording) of diagnostic messages go here + +=over 4 + +=item * + +XXX Describe change here + +=back + +=head1 Acknowledgements + +Perl 5.27.11 represents approximately 4 weeks of development since Perl +5.27.10 and contains approximately 440,000 lines of changes across 200 files +from 21 authors. + +Excluding auto-generated files, documentation and release tools, there were +approximately 440,000 lines of changes to 88 .pm, .t, .c and .h files. + +Perl continues to flourish into its third decade thanks to a vibrant +community of users and developers. The following people are known to have +contributed the improvements that became Perl 5.27.11: + +Aaron Crane, Alexandr Savca, Chris 'BinGOs' Williams, Dagfinn Ilmari +Mannsåker, Daniel Dragan, David Mitchell, H.Merijn Brand, James E Keenan, +John Peacock, Karl Williamson, Marc-Philip Werner, Nicholas Clark, Pali, +Ricardo Signes, Sawyer X, Sergey Aleynikov, Steve Hay, Todd Rinaldo, Tony +Cook, Yves Orton, Zefram. + +The list above is almost certainly incomplete as it is automatically +generated from version control history. In particular, it does not include +the names of the (very much appreciated) contributors who reported issues to +the Perl bug tracker. + +Many of the changes included in this version originated in the CPAN modules +included in Perl's core. We're grateful to the entire CPAN community for +helping Perl to flourish. + +For a more complete list of all of Perl's historical contributors, please +see the F<AUTHORS> file in the Perl source distribution. + +=head1 Reporting Bugs + +If you find what you think is a bug, you might check the perl bug database +at L<https://rt.perl.org/> . There may also be information at +L<http://www.perl.org/> , the Perl Home Page. + +If you believe you have an unreported bug, please run the L<perlbug> program +included with your release. Be sure to trim your bug down to a tiny but +sufficient test case. Your bug report, along with the output of C<perl -V>, +will be sent off to perlbug@perl.org to be analysed by the Perl porting team. + +If the bug you are reporting has security implications which make it +inappropriate to send to a publicly archived mailing list, then see +L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> +for details of how to report the issue. + +=head1 Give Thanks + +If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, +you can do so by running the C<perlthanks> program: + + perlthanks + +This will send an email to the Perl 5 Porters list with your show of thanks. + +=head1 SEE ALSO + +The F<Changes> file for an explanation of how to view exhaustive details on +what changed. + +The F<INSTALL> file for how to build Perl. + +The F<README> file for general stuff. + +The F<Artistic> and F<Copying> files for copyright information. + +=cut diff --git a/pod/perldelta.pod b/pod/perldelta.pod index 3001157c2c..74473015cc 100644 --- a/pod/perldelta.pod +++ b/pod/perldelta.pod @@ -2,106 +2,142 @@ =head1 NAME -perldelta - what is new for perl v5.27.11 +[ this is a template for a new perldelta file. Any text flagged as XXX needs +to be processed before release. ] + +perldelta - what is new for perl v5.27.12 =head1 DESCRIPTION -This document describes differences between the 5.27.10 release and the 5.27.11 +This document describes differences between the 5.27.11 release and the 5.27.12 release. -If you are upgrading from an earlier release such as 5.27.9, first read -L<perl52710delta>, which describes differences between 5.27.9 and 5.27.10. +If you are upgrading from an earlier release such as 5.27.10, first read +L<perl52711delta>, which describes differences between 5.27.10 and 5.27.11. + +=head1 Notice + +XXX Any important notices here + +=head1 Core Enhancements + +XXX New core language features go here. Summarize user-visible core language +enhancements. Particularly prominent performance optimisations could go +here, but most should go in the L</Performance Enhancements> section. + +[ List each enhancement as a =head2 entry ] =head1 Security -=head2 [CVE-2017-12837] Heap buffer overflow in regular expression compiler +XXX Any security-related notices go here. In particular, any security +vulnerabilities closed should be noted here rather than in the +L</Selected Bug Fixes> section. -Compiling certain regular expression patterns with the case-insensitive -modifier could cause a heap buffer overflow and crash perl. This has now been -fixed. -L<[perl #131582]|https://rt.perl.org/Public/Bug/Display.html?id=131582> +[ List each security issue as a =head2 entry ] -=head2 [CVE-2017-12883] Buffer over-read in regular expression parser +=head1 Incompatible Changes -For certain types of syntax error in a regular expression pattern, the error -message could either contain the contents of a random, possibly large, chunk of -memory, or could crash perl. This has now been fixed. -L<[perl #131598]|https://rt.perl.org/Public/Bug/Display.html?id=131598> +XXX For a release on a stable branch, this section aspires to be: -=head2 [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows + There are no changes intentionally incompatible with 5.XXX.XXX + If any exist, they are bugs, and we request that you submit a + report. See L</Reporting Bugs> below. -A possible stack buffer overflow in the C<%ENV> code on Windows has been fixed -by removing the buffer completely since it was superfluous anyway. -L<[perl #131665]|https://rt.perl.org/Public/Bug/Display.html?id=131665> +[ List each incompatible change as a =head2 entry ] -=head1 Performance Enhancements +=head1 Deprecations -=over 4 +XXX Any deprecated features, syntax, modules etc. should be listed here. -=item * +=head2 Module removals -The start up overhead for creating regular expression patterns with -Unicode properties (C<\p{...}>) has been greatly reduced in most cases. +XXX Remove this section if not applicable. -=back +The following modules will be removed from the core distribution in a +future release, and will at that time need to be installed from CPAN. +Distributions on CPAN which require these modules will need to list them as +prerequisites. -=head1 Modules and Pragmata +The core versions of these modules will now issue C<"deprecated">-category +warnings to alert you to this fact. To silence these deprecation warnings, +install the modules in question from CPAN. -=head2 Updated Modules and Pragmata +Note that these are (with rare exceptions) fine modules that you are encouraged +to continue to use. Their disinclusion from core primarily hinges on their +necessity to bootstrapping a fully functional, CPAN-capable Perl installation, +not usually on concerns over their design. -=over 4 +=over -=item * +=item XXX -L<bytes> has been upgraded from version 1.05 to 1.06. +XXX Note that deprecated modules should be listed here even if they are listed +as an updated module in the L</Modules and Pragmata> section. -=item * +=back -L<Carp> has been upgraded from version 1.49 to 1.50. +[ List each other deprecation as a =head2 entry ] -=item * +=head1 Performance Enhancements -L<Devel::PPPort> has been upgraded from version 3.39 to 3.40. +XXX Changes which enhance performance without changing behaviour go here. +There may well be none in a stable release. -=item * +[ List each enhancement as an =item entry ] -L<Exporter> has been upgraded from version 5.72 to 5.73. +=over 4 =item * -L<ExtUtils::Constant> has been upgraded from version 0.24 to 0.25. +XXX -=item * +=back -L<I18N::Langinfo> has been upgraded from version 0.16 to 0.17. +=head1 Modules and Pragmata -=item * +XXX All changes to installed files in F<cpan/>, F<dist/>, F<ext/> and F<lib/> +go here. If Module::CoreList is updated, generate an initial draft of the +following sections using F<Porting/corelist-perldelta.pl>. A paragraph summary +for important changes should then be added by hand. In an ideal world, +dual-life modules would have a F<Changes> file that could be cribbed. -L<IO> has been upgraded from version 1.38 to 1.39. +The list of new and updated modules is modified automatically as part of +preparing a Perl release, so the only reason to manually add entries here is if +you're summarising the important changes in the module update. (Also, if the +manually-added details don't match the automatically-generated ones, the +release manager will have to investigate the situation carefully.) -=item * +[ Within each section, list entries as an =item entry ] -L<Module::CoreList> has been upgraded from version 5.20180221 to 5.20180420. +=head2 New Modules and Pragmata + +=over 4 =item * -L<POSIX> has been upgraded from version 1.83 to 1.84. +XXX Remove this section if not applicable. -=item * +=back + +=head2 Updated Modules and Pragmata -L<subs> has been upgraded from version 1.02 to 1.03. +=over 4 =item * -L<Time::HiRes> has been upgraded from version 1.9757 to 1.9759. +L<XXX> has been upgraded from version A.xx to B.yy. -=item * +If there was something important to note about this change, include that here. + +=back + +=head2 Removed Modules and Pragmata -L<vars> has been upgraded from version 1.03 to 1.04. +=over 4 =item * -L<version> has been upgraded from version 0.9918 to 0.9923. +XXX =back @@ -186,36 +222,188 @@ XXX Describe change here =back -=head1 Acknowledgements +=head1 Utility Changes + +XXX Changes to installed programs such as F<perlbug> and F<xsubpp> go here. +Most of these are built within the directory F<utils>. + +[ List utility changes as a =head2 entry for each utility and =item +entries for each change +Use L<XXX> with program names to get proper documentation linking. ] + +=head2 L<XXX> + +=over 4 + +=item * + +XXX + +=back + +=head1 Configuration and Compilation + +XXX Changes to F<Configure>, F<installperl>, F<installman>, and analogous tools +go here. Any other changes to the Perl build process should be listed here. +However, any platform-specific changes should be listed in the +L</Platform Support> section, instead. + +[ List changes as an =item entry ]. + +=over 4 + +=item * + +XXX + +=back + +=head1 Testing + +XXX Any significant changes to the testing of a freshly built perl should be +listed here. Changes which create B<new> files in F<t/> go here as do any +large changes to the testing harness (e.g. when parallel testing was added). +Changes to existing files in F<t/> aren't worth summarizing, although the bugs +that they represent may be covered elsewhere. + +XXX If there were no significant test changes, say this: + +Tests were added and changed to reflect the other additions and changes +in this release. + +XXX If instead there were significant changes, say this: + +Tests were added and changed to reflect the other additions and +changes in this release. Furthermore, these significant changes were +made: + +[ List each test improvement as an =item entry ] + +=over 4 + +=item * + +XXX + +=back + +=head1 Platform Support + +XXX Any changes to platform support should be listed in the sections below. + +[ Within the sections, list each platform as an =item entry with specific +changes as paragraphs below it. ] + +=head2 New Platforms + +XXX List any platforms that this version of perl compiles on, that previous +versions did not. These will either be enabled by new files in the F<hints/> +directories, or new subdirectories and F<README> files at the top level of the +source tree. + +=over 4 + +=item XXX-some-platform + +XXX + +=back + +=head2 Discontinued Platforms + +XXX List any platforms that this version of perl no longer compiles on. + +=over 4 + +=item XXX-some-platform + +XXX + +=back + +=head2 Platform-Specific Notes + +XXX List any changes for specific platforms. This could include configuration +and compilation changes or changes in portability/compatibility. However, +changes within modules for platforms should generally be listed in the +L</Modules and Pragmata> section. + +=over 4 + +=item XXX-some-platform + +XXX + +=back + +=head1 Internal Changes + +XXX Changes which affect the interface available to C<XS> code go here. Other +significant internal changes for future core maintainers should be noted as +well. + +[ List each change as an =item entry ] -Perl 5.27.11 represents approximately 4 weeks of development since Perl -5.27.10 and contains approximately 440,000 lines of changes across 200 files -from 21 authors. +=over 4 + +=item * + +XXX + +=back + +=head1 Selected Bug Fixes + +XXX Important bug fixes in the core language are summarized here. Bug fixes in +files in F<ext/> and F<lib/> are best summarized in L</Modules and Pragmata>. + +[ List each fix as an =item entry ] + +=over 4 + +=item * + +XXX + +=back + +=head1 Known Problems -Excluding auto-generated files, documentation and release tools, there were -approximately 440,000 lines of changes to 88 .pm, .t, .c and .h files. +XXX Descriptions of platform agnostic bugs we know we can't fix go here. Any +tests that had to be C<TODO>ed for the release would be noted here. Unfixed +platform specific bugs also go here. -Perl continues to flourish into its third decade thanks to a vibrant -community of users and developers. The following people are known to have -contributed the improvements that became Perl 5.27.11: +[ List each fix as an =item entry ] -Aaron Crane, Alexandr Savca, Chris 'BinGOs' Williams, Dagfinn Ilmari -Mannsåker, Daniel Dragan, David Mitchell, H.Merijn Brand, James E Keenan, -John Peacock, Karl Williamson, Marc-Philip Werner, Nicholas Clark, Pali, -Ricardo Signes, Sawyer X, Sergey Aleynikov, Steve Hay, Todd Rinaldo, Tony -Cook, Yves Orton, Zefram. +=over 4 + +=item * + +XXX + +=back + +=head1 Errata From Previous Releases + +=over 4 -The list above is almost certainly incomplete as it is automatically -generated from version control history. In particular, it does not include -the names of the (very much appreciated) contributors who reported issues to -the Perl bug tracker. +=item * + +XXX Add anything here that we forgot to add, or were mistaken about, in +the perldelta of a previous release. + +=back + +=head1 Obituary + +XXX If any significant core contributor or member of the CPAN community has +died, add a short obituary here. + +=head1 Acknowledgements -Many of the changes included in this version originated in the CPAN modules -included in Perl's core. We're grateful to the entire CPAN community for -helping Perl to flourish. +XXX Generate this with: -For a more complete list of all of Perl's historical contributors, please -see the F<AUTHORS> file in the Perl source distribution. + perl Porting/acknowledgements.pl v5.27.11..HEAD =head1 Reporting Bugs diff --git a/vms/descrip_mms.template b/vms/descrip_mms.template index e87e5d658c..ef4a8ecb6d 100644 --- a/vms/descrip_mms.template +++ b/vms/descrip_mms.template @@ -307,7 +307,7 @@ utils : $(utils1) $(utils2) $(utils3) $(utils4) $(utils5) extra.pods : miniperl @ @extra_pods.com -PERLDELTA_CURRENT = [.pod]perl52711delta.pod +PERLDELTA_CURRENT = [.pod]perl52712delta.pod $(PERLDELTA_CURRENT) : [.pod]perldelta.pod Copy/NoConfirm/Log $(MMS$SOURCE) $(PERLDELTA_CURRENT) diff --git a/win32/GNUmakefile b/win32/GNUmakefile index 82bf593705..5cc444dd92 100644 --- a/win32/GNUmakefile +++ b/win32/GNUmakefile @@ -1675,7 +1675,7 @@ utils: $(HAVEMINIPERL) ..\utils\Makefile copy ..\README.tw ..\pod\perltw.pod copy ..\README.vos ..\pod\perlvos.pod copy ..\README.win32 ..\pod\perlwin32.pod - copy ..\pod\perldelta.pod ..\pod\perl52711delta.pod + copy ..\pod\perldelta.pod ..\pod\perl52712delta.pod $(MINIPERL) -I..\lib $(PL2BAT) $(UTILS) $(MINIPERL) -I..\lib ..\autodoc.pl .. $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q .. @@ -1773,7 +1773,7 @@ distclean: realclean -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS -cd $(PODDIR) && del /f *.html *.bat roffitall \ - perl52711delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ + perl52712delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \ perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \ perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \ diff --git a/win32/Makefile b/win32/Makefile index eff48e1d32..8bdada9cf7 100644 --- a/win32/Makefile +++ b/win32/Makefile @@ -1282,7 +1282,7 @@ utils: $(PERLEXE) ..\utils\Makefile copy ..\README.tw ..\pod\perltw.pod copy ..\README.vos ..\pod\perlvos.pod copy ..\README.win32 ..\pod\perlwin32.pod - copy ..\pod\perldelta.pod ..\pod\perl52711delta.pod + copy ..\pod\perldelta.pod ..\pod\perl52712delta.pod cd ..\win32 $(PERLEXE) $(PL2BAT) $(UTILS) $(MINIPERL) -I..\lib ..\autodoc.pl .. @@ -1382,7 +1382,7 @@ distclean: realclean -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS -cd $(PODDIR) && del /f *.html *.bat roffitall \ - perl52711delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ + perl52712delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \ perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \ perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \ diff --git a/win32/makefile.mk b/win32/makefile.mk index 265e93baaf..61db3b9170 100644 --- a/win32/makefile.mk +++ b/win32/makefile.mk @@ -1618,7 +1618,7 @@ utils: $(HAVEMINIPERL) ..\utils\Makefile copy ..\README.tw ..\pod\perltw.pod copy ..\README.vos ..\pod\perlvos.pod copy ..\README.win32 ..\pod\perlwin32.pod - copy ..\pod\perldelta.pod ..\pod\perl52711delta.pod + copy ..\pod\perldelta.pod ..\pod\perl52712delta.pod $(MINIPERL) -I..\lib $(PL2BAT) $(UTILS) $(MINIPERL) -I..\lib ..\autodoc.pl .. $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q .. @@ -1716,7 +1716,7 @@ distclean: realclean -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS -cd $(PODDIR) && del /f *.html *.bat roffitall \ - perl52711delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ + perl52712delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \ perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \ perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \ diff --git a/win32/pod.mak b/win32/pod.mak index b9a74a1291..27fa376c35 100644 --- a/win32/pod.mak +++ b/win32/pod.mak @@ -56,6 +56,7 @@ POD = perl.pod \ perl5270delta.pod \ perl52710delta.pod \ perl52711delta.pod \ + perl52712delta.pod \ perl5271delta.pod \ perl5272delta.pod \ perl5273delta.pod \ @@ -216,6 +217,7 @@ MAN = perl.man \ perl5270delta.man \ perl52710delta.man \ perl52711delta.man \ + perl52712delta.man \ perl5271delta.man \ perl5272delta.man \ perl5273delta.man \ @@ -375,6 +377,7 @@ HTML = perl.html \ perl5270delta.html \ perl52710delta.html \ perl52711delta.html \ + perl52712delta.html \ perl5271delta.html \ perl5272delta.html \ perl5273delta.html \ @@ -535,6 +538,7 @@ TEX = perl.tex \ perl5270delta.tex \ perl52710delta.tex \ perl52711delta.tex \ + perl52712delta.tex \ perl5271delta.tex \ perl5272delta.tex \ perl5273delta.tex \ |